XZCheng Canoe Trolling Motor Mount Bracket with Aluminum Crossbar for Quick and Easy Setup Kayak Trolling Motor,Silver,OF2607-Al
Asin: B098X8R7BH | Model: OF2607-Al | PartNumber: OF2607-Al | Ean: 0769256652370 | UPC: 769256652370
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.☻Easy Installation: Rugged Heavy Duty Motor Bracket, 28" Long Provides For A Full Range Of Propeller Motion. Hex Bolts Tighten The Clamp Bar From Above And That Requires No Tools To Mount..
☻Suitable: Works On Most Canoes But Not All Canoes..
☻Includes: 1 * Kayak Motor Mount Bracket And All The Parts Needed For The Installation..
☻Design: Depending On The Canoe Design After About 25-30 Lb Counterbalancing, 2" Wide Crossbar Minimizes Motor Vibration..
Features
- MATERIAL: Aluminum Crossbar + Plastic Wood, Strong, Stable and Detachable.
- DESIGN: Depending on the canoe design after about 25-30 lb counterbalancing, 2 wide crossbar minimizes motor vibration.
- EASY INSTALLATION: Rugged heavy duty motor bracket, 28 long provides for a full range of propeller motion. Hex Bolts tighten the clamp bar from above and that requires no tools to mount.
- INCLUDES: 1 * Kayak Motor Mount Bracket and all the parts needed for the installation.
- SUITABLE: Works on most canoes but not all canoes.
- See more on Amazon...
Brand: XZCheng | Manufacturer: Ningbo Xinzhucheng Mould Design Co., Ltd.
See On Amazon Similar To XZCheng Canoe Trolling Motor Mount
#1
VEVOR Electric Trolling Motor 55lb Thrust Transom Mounted 24-Volt Boat Motor Variable Speed 10 LED Indicator for Kayak, Small Fishing Boats (30" Shaft)
Asin: B0C1YQVRNW | Model: Electric Trolling Motor 55lb Thrust | PartNumber: Electric Trolling Motor 55lb Thrust | Ean: 0197988463641, 0840349935195 | UPC: 840349935195, 197988463641
【Upgraded Design】Vevor Boat Motor Features A 30-Inch Stainless Steel Shaft, Copper Motor And Three-Bladed Propeller, Which Can Enhance Efficiency And Service Life, Whatever Sailing On Saltwater Or Freshwater. Three Sharp Blades Give The Motor Great Low-End Torque To Get The Boat Moving. Suitable For Small Fishing Boats, Kayaks, Inflatable Boats, Canoes..
【10 Led Battery Indicator】Make It Easy To Check Your Battery Status. When The Battery Level Drops Below 20%, An Audible Notification Alerts You To Charge The Battery. With This Feature, You Can Quickly Get Back To Fishing In No Time! (Note: Battery Not Included).
【Warm Note】This Trolling Motor Requires One (1) 24V Or Two (2) 12V Connected In Series Lead-Acid Deep Cycle Or Lithium Deep Cycle Battery For Operation. ≥60A Recommended. Battery Not Included, Need Be Purchased Separately..
【Adjustable Depth & Angle】You Can Easily Adjust The Shaft Angle By Press The Button To Fit Different Sailing Conditions According To Your Fishing Demands. Also, You Can Adjust The Depth Of The Motor In The Water With A Knob For Better Fishing..
【Variable Speed & Adjustable Handle】More Precise Control Of The Boat's Moving Speed At Your Will Up To 1700Rpm. The Up And Down 12.4" Adjustable Handle Help Navigate Through Water And Weeds. The Handle Angle, As Well As Mount, Height, Angle, And Direction Can All Be Adjusted And Locked Into Place When Needed..
Features
- Powerful Motor This 55lb thrust 24V electric trolling motor provides excellent power and efficiency for small to medium boats. High quality components allow the motor to run all day long without overheating or disturb your fishing experience.
- Variable Speed & Adjustable Handle More precise control of the boat's moving speed at your will up to 1700RPM. The up and down 12.4 adjustable handle help navigate through water and weeds. The handle angle, as well as mount, height, angle, and direction can all be adjusted and locked into place when needed.
- Upgraded Design VEVOR boat motor features a 30-inch stainless steel shaft, copper motor and three-bladed propeller, which can enhance efficiency and service life, whatever sailing on saltwater or freshwater. Three sharp blades give the motor great low-end torque to get the boat moving. Suitable for small fishing boats, kayaks, inflatable boats, canoes.
- Adjustable Depth & Angle You can easily adjust the shaft angle by press the button to fit different sailing conditions according to your fishing demands. Also, you can adjust the depth of the motor in the water with a knob for better fishing.
- 10 LED Battery Indicator Make it easy to check your battery status. When the battery level drops below 20%, an audible notification alerts you to charge the battery. With this feature, you can quickly get back to fishing in no time! (Note: Battery not included)
- Warm Note This trolling motor requires one (1) 24V or two (2) 12V connected in series Lead-Acid Deep Cycle or Lithium Deep Cycle battery for operation. 60A recommended. Battery not included, need be purchased separately.
- See more on Amazon...
Brand: 12 | Manufacturer: VEVOR
Dimensions: 43.70 x 21.60 x 9.80 inches | Weight: 30.00 pounds
See On Amazon #2
Newport Kayak Series 55lb Thrust Transom Mounted Saltwater Electric Trolling Motor w/LED Battery Indicator (24" Shaft)
Asin: B07455NBNL | Model: 23M1000403 | PartNumber: 23M1000403 | Ean: 0717390768266 | UPC: 717390768266
Saltwater Rated: Durable All Aluminum Motor Head W/ Corrosion Resistant Magnesium, Zinc, And Stainless-Steel Hardware For Saltwater Use (Lead-Acid Dc 12V).
Extra Long Cables: 5'6" Battery Cables Allow For Versatile Battery Placement For Optimal Weight Distribution.
Variable Speed: 8 Speeds (5 Forward & 3 Reverse) With 6-Inch Telescoping Handle Puts You In Total Control Of Your Ride.
Features
- Kayak Shaft: 24-Inch Fiberglass Shaft Allows For Variable Depth Placement, While Offering A Lifetime Of Dependable Performance
- Variable Speed: 8 Speeds (5 Forward & 3 Reverse) With 6-Inch Telescoping Handle Puts You In Total Control Of Your Ride
- Saltwater Rated: Durable All Aluminum Motor Head W/ Corrosion Resistant Magnesium, Zinc, And Stainless-Steel Hardware For Saltwater Use (Lead-Acid Dc 12V)
- Extra Long Cables: 5'6 Battery Cables Allow For Versatile Battery Placement For Optimal Weight Distribution
- See more on Amazon...
Brand: Newport | Manufacturer: Torero Imports LLC
Weight: 23.00 pounds
Warranty: 2 Year Warranty
See On Amazon #3
NyVoozy Rudder Clamp on Boat Rudder Fits Most 24 to 55" Trolling Motors, Kayak Rudder Kit Designed for Kayak, Canoe, Angling Boat, etc, Electric Motors Rudder Clamp Widely Use for Canoe, Jon boat, etc
Asin: B09N9G36J8 | Ean: 0767587303916 | UPC: 767587303916
Premium Material-The Body Of Our Trolling Motor Accessories Is Made From Pa66gf30 Which Is A New And Premium Material, It Can Last Long Time. And The Screws Are Made From Su304 Which Is One Kind Of Anti-Rust And Resistant To Hydrochloric Acid Corrosion Material, So You Could Use It In The Seawater..
Easy Use-It Can Be Used When It Is Installed In The Boat Trolling Motors, And It Is Easy To Operate Without Any Operation Skills. Because The Rudder Accessories Let You Keep You On The Right Way And Let You Reduce Wind Resistance, So Your Trolling Motor Battery Lasted Longer..
Easy Install-Very Easy To Install, With Screws, You Could Install Our Trolling Motor Mount To Trolling Motor Only A Few Minutes..
Widely Use For-Our Kayak Rudder Kit Measures 10.5" High X 4.75" Wide And Suitable For A 23-32Mm" Shaft Diameter Which Is Boat Rudder Clamp Compatible With Most 24-55Lb Transom Mount Trolling Motors. It's Commonly Used For Motorguide Trolling Motors, Minn Kota Trolling Motor, Newport Vessel Trolling Motor, Etc. Designed For Kayak, Canoe, Seayak, Angling Boat, Etc..
Features
- OBVIOUSLY IMPROVED-Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don't worry rudder out of control any more.
- WIDELY USE FOR-Our kayak rudder kit measures 10.5 high x 4.75 wide and suitable for a 23-32MM shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It's commonly used for motorguide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc.
- PREMIUM MATERIAL-The body of our trolling motor accessories is made from PA66GF30 which is a new and premium material, it can last long time. And the screws are made from SU304 which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater.
- EASY INSTALL-Very easy to install, with screws, you could install our trolling motor mount to trolling motor only a few minutes.
- EASY USE-It can be used when it is installed in the boat trolling motors, and it is easy to operate without any operation skills. Because the rudder accessories let you keep you on the right way and let you reduce wind resistance, so your trolling motor battery lasted longer.
- See more on Amazon...
Brand: NyVoozy | Manufacturer: NyVoozy
See On Amazon #4
RAILBLAZA Trolling Motor Mount Stabilizer with Starport Hard Mount Base, Compatible with Tracker, Crestliner, LOWE and More
Asin: B09DDB3D7V | Model: 02-4158-11 Kits | PartNumber: 02-4158-11 Kits
Flexible Strap Holds The Trolling Motor Shaft Captive To Avoid Vibration On Road Or On Water..
Can Be Order With Or Without Mounting Base.
Can Be Removed To Create A Clear Deck When Trolling Motor Is In Use.
Height Adjustable To Suit Different Shaft Heights Depending On Your Motor Mounting Position.
Features
- Can be offset inboard or outboard of your boat to suit the alignment of your Trolling motor shaft.
- Height adjustable to suit different shaft heights depending on your motor mounting position
- Flexible strap holds the trolling motor shaft captive to avoid vibration on road or on water.
- Can be removed to create a clear deck when Trolling motor is in use
- Can be order with or without mounting base
- See more on Amazon...
Brand: RAILBLAZA | Manufacturer: RAILBLAZA
Warranty: 5 Year
See On Amazon #5
Bullnose Rudder clamp on boat rudder fits a 1.125" transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured
Asin: B01FRLDP26 | Model: 868527000206A | PartNumber: 868527000206A | Ean: 0868527000206, 0744288437614 | UPC: 744288437614, 868527000206
Essential - In Most Cases It Helps Hold A True Course At Both A Slow And High Trolling Speeds. Customers Have Also Said, “It Prevents The Boat From Spinning As Much When The Motor Is Off”. Most Tiny Boats Will Benefit From Having Some Kind Of A Rudder Set Up In The Back Vs Not Having A Rudder At All. Only Takes A Few Minutes To Install And You Are Ready To Go..
Bow Mount - Fits The Minn Kota, Edge, Maxxum, And Fortrex. The Bow Mount Motor Must Be A Hand Cable Pull, Not Self Deploy. Self Deploy Will Not Work Because The System Requires The Shaft To Slide Up And Down Right Where The Rudder Needs To Be Attached. However, A Hand Cable Pull Will Allow You To Carefully Bring The Motor Up Out Of The Water On The Motor Mount. Your Bow Mount Setup Needs To Have 1' Of Shaft Sticking Out From The End Of The Platform Allowing Enough Space To Attach The Rudder..
Quality - Manufactured In The Usa With High Quality Parts & Material To Help Ensure You Have A Stress-Free Fishing Experience. It Is Manufactured From Impact Plastic For Durability And Comes With Stainless Steel Screws. It Is Built Strong So You Don't Have To Worry About It Coming Loose, Allowing You To Focus More On Fishing. Patent No. D712,341S.
Fit - The Bullnose Rudder Is A Boat Rudder That Fits 1 1/8" (1.125") Transom Mount Trolling Motors. Please Note, It Will Not Work On A Self Deploy Bow Mount Trolling Motor. It Measures 10.5" High X 4.75" Wide And Fits A 1 1/8" Shaft Diameter. It's Most Commonly Used For "But Not Limited To" Minn Kota Trolling Motor, Motorguide Trolling Motors, Newport Vessel Trolling Motor, Etc. Common Tiny Boats Used Are, Inflatable Pontoon, Pelican Bass Raider 10E, Fishing Kayak, Canoes, Jon Boats, And More..
Features
- PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S
- FIT - The Bullnose Rudder is a boat rudder that fits 1 1/8 (1.125) transom mount trolling motors. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5 high x 4.75 wide and fits a 1 1/8 shaft diameter. It's most commonly used for but not limited to minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more.
- ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, it prevents the boat from spinning as much when the motor is off . Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install and you are ready to go.
- QUALITY - Manufactured in the USA with high quality parts & material to help ensure you have a stress-free fishing experience. It is manufactured from impact plastic for durability and comes with stainless steel screws. It is built strong so you don't have to worry about it coming loose, allowing you to focus more on fishing. Patent no. D712,341S
- BOW MOUNT - Fits the Minn Kota, EDGE, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Self deploy will not work because the system requires the shaft to slide up and down right where the rudder needs to be attached. However, a hand cable pull will allow you to carefully bring the motor up out of the water on the motor mount. Your bow mount setup needs to have 1' of shaft sticking out from the end of the platform allowing enough space to attach the rudder.
- See more on Amazon...
Brand: Bullnose Products | Manufacturer: Bullnose Products LLC
Dimensions: 1.50 x 10.50 x 6.75 Inches | Weight: 0.54 Pounds
See On Amazon #6
MotorGuide 940200060 X3 Freshwater Bow Mount Trolling Motor Cable Steer, Foot-Control 45-Inch Shaft, 45-Pound Peak Thrust
Asin: B00FPQPGAI | Model: 940200060 | PartNumber: 940200060 | Ean: 0520893355921, 0400265013041, 0089287106834 | UPC: 400265013041, 520893355921, 089287106834
5 Speed With Pull/Pull Smooth Responsive Steering Control.
Mounting Bracket Built With Aircraft-Grade Extruded Aluminum.
Corrosion Resistant Shaft.
45" Composite Shaft.
Features
- 45 pounds peak thrust rating with 12-volt power
- 45 composite shaft
- 5 speed with pull/pull smooth responsive steering control
- Corrosion Resistant Shaft
- Mounting bracket built with aircraft-grade extruded aluminum
- See more on Amazon...
First Available: 09/13/2018
Brand: MotorGuide | Manufacturer: MotorGuide
Dimensions: 8.00 x 57.00 x 22.00 inches | Weight: 46.00 Pounds
See On Amazon #7
Humminbird 7400871 AD XTM 9 Trolling Motor Adapter
Asin: B000MPRJIO | Model: 740087-1 | PartNumber: 740087-1 | Ean: 0803982912459, 0066511718032, 0836330001147, 0031111373912, 0082324507724 | UPC: 031111373912, 836330001147, 082324507724, 803982912459, 066511718032
1-Year Limited Warranty.
Features
- Compatible with: XM 9 MDI T, XNT 9 20, XNT 9 20 T, XNT 9 DB 74 T, XNT 9 DI T, XNT 9 HW DI T, XNT 9 HW MDI 75 T, XNT 9 HW MSI 150 T, XNT 9 HW SI T, XNT 14 20 T, XNT 14 74 T, XNT 14 DI T, XM 14 20 MDI T, XNT 14 HW T
- 1-Year Limited Warranty
- See more on Amazon...
Brand: Humminbird | Manufacturer: Humminbird
Dimensions: 7.30 x 15.10 x 8.50 inches | Weight: 0.43 pounds
Warranty: One-Year Warranty
See On Amazon #8
Trolling Motor Accessories, Haoguo Paddle Boat Parts, Boat Rudder Fits Most 24-55 Thrust Trolling Motors, Great for Pontoon, Fishing Kayak, Canoe, Jon Boat
Asin: B09NPT65T7 | Model: 1 | PartNumber: 1 | Ean: 0779288407145 | UPC: 779288407145
Universal Mount - Compatible With Most Electric Trolling Motors (24 To 55 Thrust). Ideal For Use As A Canoe Rudder, Or A Inflatable Pontoon Rudder, Kayak Rudder, Or Pelican Bass Raider 10E Rudder.
Bow Mount - Compatible With Edge, Minn Kota, And Fortrex, Etc. The Bow Mounting Motor Must Be Manually Drawn Rather Than Self-Deployed.
Easy Installation - Complimentary Socket Wrench For Easy Installation, Very Easy. You May Even Mount It With The Short End Down (Upside Down) For Shorter Motors.
More Control - Easy Turns When Steering, Provides Better Control In Wind Or Other Most Weather Environments, Reduces The Need For Oars, It Really Helps To Keep Your Boat Heading In The Wind And Reduces Your Boat Rotation As Much As Possible When The Motor Is Turned Off.
Features
- STURDY & DURABLE - The rudder is made of stainless steel material, and also equipped with stainless steel screws and jam nut to improve stability, rust and corrosion resistance. It is sturdy and durable to extend the service life and allowing you to focus more on fishing
- MORE CONTROL - Easy turns when steering, provides better control in wind or other most weather environments, reduces the need for oars, it really helps to keep your boat heading in the wind and reduces your boat rotation as much as possible when the motor is turned off
- UNIVERSAL MOUNT - Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder
- EASY INSTALLATION - Complimentary socket wrench for easy installation, very easy. You may even mount it with the short end down (upside down) for shorter motors
- BOW MOUNT - Compatible with EDGE, Minn Kota, and FORTREX, etc. The bow mounting motor must be manually drawn rather than self-deployed
- See more on Amazon...
Brand: Haoguo | Manufacturer: Haoguo
Dimensions: 1.00 x 2.00 x 1.00 Inches
See On Amazon #9
Minn Kota 1840201 MKR-15 Transducer Mounting Kit Marine Motor Accessory
Asin: B000E8HX9E | Model: 1840201 | PartNumber: 1840201 | Ean: 0029402007691, 0066510909509, 0611104334399, 0042112027056 | UPC: 042112027056, 029402007691, 066510909509, 611104334399
Package Weight: 0.227 Kilograms.
Country Of Origin: China.
Package Dimensions: 7.62 L X 17.526 W X 19.812 H (Centimeters).
Features
- Product Type: Fishing Equipment
- Package Dimensions: 7.62 L X 17.526 W X 19.812 H (Centimeters)
- Package Weight: 0.227 Kilograms
- Country Of Origin: China
- See more on Amazon...
First Available: 08/02/2010
Brand: Minn Kota | Manufacturer: Johnson Outdoors
Dimensions: 8.75 x 3.25 x 7.25 Inches | Weight: 0.35 Pounds
Warranty: limited warranty
See On Amazon #10
MotorGuide R3 Transom Mount Hand-Control, Black, 30-Inch (940100170)
Asin: B004HO9W36 | Model: 940100170 | PartNumber: 940100170 | Ean: 0066510909196, 0022697940179 | UPC: 066510909196, 022697940179
Tough Aluminum 7-Position Mount Gives You Greater Flexibility And Adaptability.
Reversible Motor Head For Bow Or Transom Mount Operation; Sport Type: Boating.
30" Shaft.
#03 Transom Mount.
Freshwater Use.
30 Lbs. Thrust.
Lower Unit Constructed Of Solid Steel And Aluminum With A Powder Coat Finish To Withstand The Toughest Conditions.
5 Speed Forward And 2 Reverse.
Digital Power Management Technology Extends Battery Life Up To 5 Times For Longer Running Between Charges.
Features
- Classic twist-tiller operation equipped with the 3-blade Machete propeller
- Digital Power Management technology extends battery life up to 5 times for longer running between charges
- Tough aluminum 7-position mount gives you greater flexibility and adaptability
- Lower unit constructed of solid steel and aluminum with a powder coat finish to withstand the toughest conditions
- Freshwater use
- 30 lbs. thrust
- 30 shaft
- #03 transom mount
- 5 speed forward and 2 reverse
- Reversible motor head for bow or transom mount operation; Sport type: Boating
- See more on Amazon...
First Available: 12/31/2012
Brand: MotorGuide | Manufacturer: MotorGuide
Dimensions: 6.00 x 41.00 x 15.00 inches | Weight: 286.00 ounces
See On Amazon
Looking For Something Else?
Search