MENSI Grill Igniter Assembly Kit for Blackstone 28" Griddle, Electronic AA Battery Ignitor Replacement Kit with one Cap for Backup
Asin: B0991JWQ7X | Model: SMT-DHQ010/DHZXZJ001/DHQAN001 | PartNumber: SMT-DHQ010/DHZXZJ001/DHQAN001
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy To Install And Just Replace Each Electrode On Your Current Burner Fixing Plate And Other Side Connect The Ignitor.
The Rated Output Voltage Of This Igniter: The Minimum Output Voltage Is 12 Kv. Use The Life Cycle Greater Than 30000 Times. Min Ambient Temp:--4℉, Max Operating Ambient Temp: 185℉..
The Igniter Cap Need To Take Off And Insert And Aa Battery Inside To Let It Start Work..
Include One Aa Igniter And 4 Pieces Of Spark Electrode With Cable With Different Length For 4 Burners.
Features
- Specific AA Battery Ignition Assembly Replacement Kit for Blackstone 28" Griddle
- Include one AA igniter and 4 Pieces of Spark Electrode with Cable with different Length for 4 burners
- Easy to install and just replace each electrode on your current burner fixing plate and other side connect the ignitor
- The Igniter Cap need to take off and insert and AA battery inside to let it start work.
- The rated output voltage of this igniter: the minimum output voltage is 12 kV. Use the life cycle greater than 30000 times. Min ambient temp:--4 , Max Operating ambient temp: 185 .
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon Similar To MENSI Grill Igniter Assembly Kit
#1
MENSI 11.8 Long Propane Push Button Piezo Igniter Kit Gas Grill/Range/Heater/Stove Spaker Generator Ignition Set 2Pcs/Lot
Asin: B07K6BTFJH | Model: SMT-DHQ003/DHZX016 | PartNumber: SMT-DHQ003/DHZX016 | Ean: 0737123200160 | UPC: 737123200160
No Battery Needed Just Press, One Press One Spark But 𝐌𝐚𝐤𝐞 𝐬𝐮𝐫𝐞 𝐲𝐨𝐮 𝐜𝐨𝐧𝐧𝐞𝐜𝐭 𝐭𝐡𝐞 𝐠𝐫𝐨𝐮𝐝 𝐰𝐢𝐫𝐞 𝐨𝐫 𝐭𝐨𝐮𝐜𝐡 𝐠𝐫𝐨𝐮𝐝𝐢𝐧𝐠 𝐩𝐨𝐢𝐧𝐭𝐬. Life Time: Over 30000Times.
Pin Straight Length: 19.5Mm 135Degree At Head 9.0Mm.
Installtion Tips: Very Important!!! - 𝐭𝐡𝐞 𝐩𝐢𝐞𝐳𝐨 𝐢𝐠𝐧𝐢𝐭𝐞𝐫 𝐡𝐚𝐬 𝐚 𝐬𝐢𝐥𝐯𝐞𝐫 𝐬𝐢𝐧𝐠𝐥𝐞 𝐥𝐢𝐧𝐞 𝐰𝐡𝐢𝐜𝐡 𝐚𝐜𝐭 𝐚𝐬 𝐠𝐫𝐨𝐮𝐧𝐝 𝐜𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐨𝐧 𝐩𝐨𝐢𝐧𝐭. You Must Tough That Point To A Metal Control Pannel Or Add Some Metal To Get A Singnal There So You Can Get It Correct Spark. Without Connect Well, The Igniter Cannot Ignite The Burner Because The Spark Will Not Come From The Head Of Electrode Pin.
Output Voltage: >=20Kv,Sparking Distance: 3-5Mm, Wire Length 30Cm, Electrode : M10*1 Length: 57Mm.
Features
- DIY kit suitable for all Propane & Natural Gas Gears but you may need do some modification during installation, It not fits all the current hole for install or the length of wire (if power is not enough you can use two
- Output voltage: >=20kv,Sparking distance: 3-5mm, wire length 30cm, Electrode : M10*1 length: 57mm
- No battery needed just press, one press one spark but . Life time: Over 30000times
- Installtion Tips: VERY IMPORTANT!!! - . you must tough that point to a metal control pannel or add some metal to get a singnal there so you can get it correct spark. Without Connect well, The igniter cannot ignite the burner because the spark will not come from the head of electrode pin
- Pin straight length: 19.5mm 135degree at head 9.0mm
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
Dimensions: 1.18 x 3.60 x 3.00 Inches | Weight: 0.18 pounds
See On Amazon #2
MENSI Piezo Igniter Assembly Replacement Kit for Weber Grill Model 7510, Spirit E-210, Spirit 500/700, Genesis E-310/E-320, Genesis Silver B/C, Genesis Gold B/C, Platinum B/C
Asin: B07YF9G49M | Ean: 0747045380857 | UPC: 747045380857
Fits Original Part Numbers: Weber 7510. Replacement Igniter Kit For Gas Grills.
Does Not Fit Genesis Silver/Gold C Models After 2003.
The Igniter Kit Includes A Parts Of Sparker With Controller Box, A Snap-In Style Push-Button Igniter, Output Voltage: >=20Kv.
Fits Weber Genesis Models Includes: Genesis E-310 & E-320(2007-2012), Gensis Silver B, Genesis Silver C, Genesis Gold B & Gold C(2000-2010), Genesis Platinum B & Platinum C(After 2005).
Features
- Ignition Kit Replacement for Weber Spirit Models includes: Spirit E-210(2007-2008), Spirit 500, Spirit 700, Weber Silver A, Weber 900
- Fits Weber Genesis Models includes: Genesis E-310 & E-320(2007-2012), Gensis Silver B, Genesis Silver C, Genesis Gold B & Gold C(2000-2010), Genesis Platinum B & Platinum C(after 2005)
- Fits original part numbers: weber 7510. Replacement igniter kit for gas grills
- The igniter kit includes a parts of sparker with controller box, a snap-in style push-button igniter, Output voltage: >=20KV
- Does not fit Genesis Silver/Gold C models after 2003
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
Weight: 80.00 Grams
See On Amazon #3
MENSI Electronic Push Button Pluse Igniter & Wire 500mm for Uniflame Patio Heaters, Gas Firepits, and Other DIY Gas Appliances
Asin: B07W3MNS57 | Ean: 0741663746477 | UPC: 741663746477
Length Of Wire 200 Degree High Temperature Resistance & 500Mm Long.
Item Was Approved And Qualified.
Easy To Get A Spark Just Install An Aa Battery And Push The Red Button ( Need Connect Electrode On Wire).
Fits Several Gas Firepit Models From Uniflame, Endless Summer And Other Brands Of Heater And Fire Pit Also Good For Diy Products.
Features
- Igniter and wire for Uniflame Patio Heaters and Gas Firepits 233000, 233010, GWU9209SP, GWU512A, GAD860SP, GAD920SP, GAD1200B
- Fits several Gas firepit models from Uniflame, Endless Summer and other brands of heater and fire pit also good for DIY products
- Length of Wire 200 degree high temperature resistance & 500mm long
- Easy to get a spark just install an AA battery and push the red button ( need connect electrode on wire)
- Item was approved and qualified
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #4
MENSI Piezo igniter with Spark Ignition Electrode 200 Degree Resistance Wire 1 Meter Long Set of 2
Asin: B074FPYLQN | Ean: 0608651852735 | UPC: 608651852735
Set Of 2 （Send Email If You Can't Get It Work We Will Send Operation Viedo）.
Attention For Installation: Keep The Ceramic Pin Around 5Mm To The Burner Hole Or It May Not Ignite Gas.
Voltage Over 20Kv , Life Time: Over 35000 Times.
200℃ Resistance Wire 1M Long.
Features
- Piezo igniter with Groud Terminal keep flat terminal touch metal always
- 200 resistance wire 1m long
- Set of 2 send email if you can't get it work we will send operation viedo
- Voltage over 20kV , Life time: over 35000 times
- Attention for installation: Keep the ceramic pin around 5mm to the burner hole or it may not ignite gas
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
Weight: 0.15 pounds
See On Amazon #5
MENSI Replacement Electronic Battery Igniter Kit for Weber Spirit 200/300 and Weber Genesis 200/300 Propane Grill (91360 Igniter Kit for Weber Spirit 200/300)
Asin: B095PD1FG5
Electronic Igniter Kit For Weber Spirit Grills (2009 - 2012) Models, Fits For Weber 67847 Genesis Series Gas Grill.
This Igniter Kit Is Designed To Replace The Tired, Worn Out Ignition System In Your Weber Gas Grill. It Is Suitable For Weber 67847 Genesis E-310 E320 E330 S310 S320 S330 300 Series Grills(2008-2010) With Side-Control, (2 Outlet)..
Push Putton Is Threaded "Screw On" For "Aaa" Battery.
The Package Includes 1 Electronic Module, 1 Collector Box, 1 Button And Wires. Also Include One Switch Button For Replacement. Aaa Battery Or Installation Instructions Are Not Included..
Features
- The Ignitor Kit Fits for Weber Spirit (2009-2012) Grills with Side-mounted control panel, including Spirit E/S- 210, 310, 320, EP/SP- 310, 320 and Spirit 700 Models.
- The Package includes 1 electronic module, 1 collector box, 1 button and wires. Also include one switch button for replacement. AAA battery or installation instructions are not included.
- Electronic Igniter Kit for Weber Spirit grills (2009 - 2012) Models, FITS FOR WEBER 67847 GENESIS SERIES GAS GRILL
- Push Putton is Threaded screw on for AAA battery
- This igniter kit is designed to replace the tired, worn out ignition system in your Weber gas grill. It is suitable for Weber 67847 Genesis E-310 E320 E330 S310 S320 S330 300 Series Grills(2008-2010) with Side-Control, (2 outlet).
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #6
MENSI Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with / " ( / "- ) Fitting
Asin: B07CN33GSJ | Ean: 0737123200474 | UPC: 737123200474
Platic Black Bakelite Knob Diameter 38Mm And "D" Insert For Valve 6.0-6.1Mm.
Keep The Thermocoupler To Be Heated And Push The Valve Around 5-10S Then Release Hand (If Flame Stops, Ajust The Location Of Thermocouple Tip).
Suitable For Low Pressure Repair Control System For Grill, Fire Pit, Fireplace & Heater (Max Btu Rating: 50000 Working Pressure 65Mbar).
Length Of Thermocoupler 600Mm Head Tip M8*1 (This Is Low Pressure Control Valve Max Rating Btu 50000).
Features
- Low Working Pressure Max 1/2 PSI 65mbar , CE&CSA tested Main Control Valve In & Out with / " ( / "- ) thread
- Length of Thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000)
- Platic Black Bakelite Knob Diameter 38mm and D Insert for Valve 6.0-6.1mm
- Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar)
- Keep The Thermocoupler to be Heated and Push the Valve around 5-10s Then Release Hand (if Flame stops, Ajust the location of Thermocouple tip)
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #7
MENSI Propane Gas Patio Heater Replacement One Exit Electronic AAA Battery Pulse Igniter Not Universal
Asin: B07VP421C3 | Ean: 0741663746446 | UPC: 741663746446
Very Easy To Install On Your Heaters Mounting Size 18Mm Npt Suitable For Aa Battery Type.
Small Size Can Save Space, Keep Around 6Mm Distance Of The Sparker Points To Your Burner Hole.
Also Suitable For Grill, Stove , Fire Pit, Fireplaces & Other Gas Products.
Open The Red Switch And Insert One Of Aaa Battery And Connect Your Sparker And Push Directly.
Features
- AAA type electronic battery igniter for glass tube commericial patio heaters (battery is not include)
- Open the red switch and insert one of AAA battery and connect your sparker and push directly
- Very easy to install on your heaters mounting size 18mm NPT suitable for AA Battery Type
- Also suitable for grill, stove , fire pit, fireplaces & other gas products
- Small size can save space, keep around 6mm distance of the sparker points to your burner hole
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #8
MENSI double ignition kit electronic igniter with high spark plug wire length 450mm each for Catering euqipment stove
Asin: B07BF5652B | Ean: 0737123200535 | UPC: 737123200535
Spark Wire Length 450Mm, Temperature Resistance 200℃.
Electronic Ignition Kit Whole Sets.
High Efficency Sparks Also Suitable For Catering Equipment Burner.
One Piece Of Double Ignition Spark.
Features
- One piece of Two outlets igniter (AA battery not include, you need to install AA battery then can spark)
- One piece of double ignition spark
- Spark wire length 450mm, Temperature resistance 200
- High efficency Sparks also suitable for Catering equipment burner
- Electronic ignition kit whole sets
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
Weight: 0.44 pounds
See On Amazon #9
MENSI New Universal Electronic Spark AA Battery Ignition Module Push Button or Non-Manual Assembly Kit 5 Exits Ignitor Parts Suitable for Charbroil G511-0055-W1 and Other Models
Asin: B09CH47BDT
The Ignition Module Works On A Grill With Up To 4 Main Burners Plus A Side Burner Normally But We Supplied Solution To Use For 1, 2, 3, 4 Burner Grill With Our Plug With Our Wiring Diagram Description.
During Using The Flat Cap Of Switch You Need To Connect An External Switch To Let It Work.
This Set We Included Several Parts And Wiring Diagram Manual To Help You Use For Any Propane Grill , Stove As A Universal Ignition Kit.
Compatible With Char-Broil Surefire Ignition Systems And Most Other Electronic Ignitions, Like Charbroil Model 47362327062, 463446015, 463242716, 463247209, 463432215, 463243911, Infrared Model 463241313, 463244012 Perfect Fit Charbroil Grill Model # G651-1300-W1, Easy Installation And Works Perfectly.
Features
- Universal Ignitor Kit Used for Gas Grill, Heater, Fire Pit Etc, Includes One Piece 5 Exits Igniter with flat cap, One cable, One AA Battery Pop Up Cap, 4 Pieces of Igniter Terminal Plug
- Compatible with Char-Broil Surefire ignition systems and most other electronic ignitions, like charbroil model 47362327062, 463446015, 463242716, 463247209, 463432215, 463243911, infrared model 463241313, 463244012 Perfect fit charbroil grill model # G651-1300-W1, easy installation and Works perfectly
- The Ignition module works on a grill with up to 4 main burners plus a side burner Normally But we supplied solution to use for 1, 2, 3, 4 Burner Grill with our Plug with our Wiring diagram description
- This set we included several parts and Wiring diagram manual to help you use for any propane grill , stove as a universal ignition Kit
- During Using the Flat Cap of Switch you need to connect an External switch to let it work
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #10
MENSI AA Battery Two Exits Grill Igniter with Spark Plug Wire 1 Meters Long (Two electrodes)
Asin: B07BF7ZLNW | Model: FRDH-JS-1029-085 | PartNumber: FRDH-JS-1029-085 | Ean: 0737123200542 | UPC: 737123200542
High Temperature Resistance Wire & Universal Electrode.
The Pin Can Be Bent Or Cut If You Need Different Size On Your Gear.
Suitable For Most Diy Gas Appliance.
Two Piece Spark Plug Threaded M10*1 Wire Length 1000Mm.
Features
- One piece of Two outlets igniter use AA battery (battery is not included)
- Two piece spark plug threaded M10*1 Wire length 1000mm
- High temperature resistance wire & Universal Electrode
- Suitable for most DIY gas appliance
- The Pin can be bent or Cut if you need different size on your gear
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #11
MENSI Outdoor Propane Gas Patio Heater Controller Box Igniter with Electrode Ceramic Ignition Assembly Replacement Kit with 16" Cable
Asin: B08C2YX2M3
- Aaa Battery Not Include, This Is Not A Universal Repair Ignition Assembly Kit, Just For Some Outdoor Patio Heaters.
-- No Need Extra Tools, Just Insert The Igniter Into The Controller Box And Connect The Spark Electrode Into The Pilot Burner Bracket.
- Csa Certified Parts.
- Include A 16" Electrode Sparker With Cable.
Features
- -AAA battery igniter used for outdoor patio heaters
- - Include a 16 Electrode sparker with cable
- - AAA battery not include, This is not a universal repair ignition assembly KIt, Just for some outdoor patio heaters
- - CSA certified Parts
- -- No need extra tools, Just insert the igniter into the controller box and connect the spark electrode into the pilot burner bracket
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #12
MENSI Gas Heater One Outlet Piezo Igniter Spark Plug Push Button Ceramic igniter 2PCS
Asin: B077XYYBHN | Ean: 0737123199648 | UPC: 737123199648
Output Voltage: >=18Kv Pressure: 3.0±0.5Kg.
No Battery Just Press, One Press One Spark..
Applicable Gas: Lpg, Ng Temperature-Resistance: -20°C~120°C.
Length: 9Cm Diameter: 2.6Cm.
Features
- Sparking distance: 2-3mm
- Length: 9cm Diameter: 2.6cm
- Output voltage: >=18kv Pressure: 3.0 0.5kg
- Applicable Gas: LPG, NG Temperature-resistance: -20 C~120 C
- No battery just press, one press one spark.
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #13
MENSI Electronic Ignition Button Switch, Grill Replacement Igniter Push Button Module Specific for Char-Broil Surefire Ignition Systems, 2 Pack
Asin: B097JK9CN9
Mostly For Char-Broil Electronic Ignition Kit But Also Can Used For Diy Grill Or Heater..
This Surefire Electronic Ignition Button Replaces The Ignition Button In Any Char-Broil Product That Includes The Surefire Ignition Button. Includes Wires To Connect With The Ignition Module..
The Switch Kit Includes Switch And Two Igniter Cables With 16" Long Of Each Total 2 Sets.
Fits Universal Char-Broil Grill Models As 463241013, 463243911, 463243812, 463246910, 463246909, 463251414, 463251413, 463262211,463262210, 463270611,463270610,463250212 Also Fits Charbroil 466241013, 466246910, 466251413,463270612, 463270613, 463270614, 463273614 (Other Gas Grill Models May Not Be Fully Listed).
Features
- Perfect Fit the Char-Broil Surefire Ignition Systems Ignition Control Switch
- Fits universal Char-Broil Grill models as 463241013, 463243911, 463243812, 463246910, 463246909, 463251414, 463251413, 463262211,463262210, 463270611,463270610,463250212 Also fits Charbroil 466241013, 466246910, 466251413,463270612, 463270613, 463270614, 463273614 (other gas grill models may not be fully listed)
- Mostly for char-broil electronic ignition kit but also can used for DIY grill or heater.
- The switch kit includes switch and two igniter cables with 16 long of each total 2 Sets
- This SureFire Electronic Ignition Button replaces the ignition button in any Char-Broil product that includes the SureFire ignition button. Includes wires to connect with the ignition module.
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
Dimensions: 0.79 x 0.79 x 1.18 inches | Weight: 0.00 pounds
See On Amazon #14
MENSI 11.8 Long Grill Replacement AA Igniter With Electrode Wire High Effiency Pulse Ignition Kit
Asin: B07VL7SJHZ | Model: SMT-RQ081/DHZX016 | PartNumber: SMT-RQ081/DHZX016 | Ean: 0741663746439 | UPC: 741663746439
Red Push Button Just Small Force And Many Sparks More Effiecient.
Csa Certified, Durable And Lasts Longer, Universal Spark Generator Bbq Gas Grill Replacement.
18Mm Mounting Hole Threads On Your Grill.
Grill Replacement Ignition Part Thin Type Igniter Can Save More Space In Your Grill.
Features
- AA battery type igniter one exit with ceramic electrode wire 300mm (battery is not included)
- Grill replacement ignition part thin type igniter can save more space in your grill
- Red push button just small force and many sparks more effiecient
- 18mm mounting hole threads on your grill
- CSA Certified, Durable and Lasts Longer, Universal Spark generator BBQ Gas Grill Replacement
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #15
MENSI Propane Gas Fireplaces Fire Pits DIY Safety Replacement Part Pilot Burner Assembly For Propane Igniter Kit M8x1 Thermocoupler with OD 4mm Copper Tube Connection
Asin: B07SQL5R8H | Ean: 0741663746330 | UPC: 741663746330
Designed For Fireplaces & Fire Pits For Propane Gas （Compare The Size Before Ordering）.
Attention: 900Mm Pilot Gas Tube Included With M8x1 Olive Nuts For Gas Valve Pilot Port. 4Mm Diameter Copper Tube.
This Can Be A Diy Gas Appliance And Easy Install With Necessary Nuts, Each Connection Should Be Connected Well So Can Work Perfectly.
With Stainess Steel Gas Collecting Box Protect The Flame To Be Extinguished And More Efficient For Ignition Sparks.
Features
- Safety pilot kit with ignition 2.8*0.5mm Flat terminal for Igniter & thermocouple sensor M8*1 end thread for valve 900mm
- With stainess steel gas collecting box protect the flame to be extinguished and more efficient for ignition sparks
- Designed for Fireplaces & Fire pits for propane gas compare the size before ordering
- This can be a DIY gas appliance and easy install with necessary nuts, Each connection should be connected well so can work perfectly
- Attention: 900mm pilot gas tube included with M8X1 Olive Nuts for gas valve pilot port. 4mm diameter Copper tube
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #16
MENSI Gas Grill Stove Ignition Electrode Spark Plug 36" with High Temperature Resistance Leads DIY Igniter Sparker Pack of 2
Asin: B07ZJCNJTT | Model: SMT-DHZX006-002 | PartNumber: SMT-DHZX006-002
Thread Of The Head With Two Fixing Nut M10*1.
Universal Electrode Sparker But You May Have To Do Some Modifcation During Fixing On Your Gas Appliance.
85Mm Of Needle & 40Mm Ceramic.
Temperature Resistance Of Wire: 200°C.
Features
- The ignition lead length 36" Long with 2.8*0.5mm flat terminal for AA or AAA battery igniter
- Temperature resistance of wire: 200 C
- Thread of the head with two fixing nut M10*1
- 85mm of needle & 40mm ceramic
- Universal electrode sparker but you may have to do some modifcation during fixing on your gas appliance
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
Weight: 0.02 pounds
See On Amazon #17
MENSI Propane Gas Patio Heater Spark Electrode Igniter with Calble Wire Ignition Sparker 15.75" For Heater Replacement 1 PC
Asin: B0789BDL25 | Model: SMT-RQ071 | PartNumber: SMT-RQ071 | Ean: 0737123199693 | UPC: 737123199693
It Is Universal Model For Gas Stove.
Stove Electrode Sharp Sparkers.
Diy Electrode For Any Gas Appliance.
Flat Terminal On End 2.8*0.8Mm.
Features
- length 400mm, wire resistance 200
- flat terminal on end 2.8*0.8mm
- It is universal model for gas stove
- DIY electrode for any gas appliance
- Stove electrode sharp sparkers
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #18
MENSI AAA Battery Pulse Electronic Igniter Replacement of Grills Pack of 2 Only For AAA Type Igniter, Weber 81316 1.5" Snap-Fit Igniter Button, For AAA Type Igniter
Asin: B0993JW54Z
Chrome Plated Service Aaa Batter Igniter Cp 1.5" Diameter.
For Weber "Aaa" Battery Sized Electronic Modules.
Threaded "Screw On" Rubber Push Button.
Replace The Defect Push Buttons And Easy Change The Ignitor To New For The Threaded, Screw-On Type, See Weber Part 30158201..
Features
- This is a replacement parts for most Weber 81316 1.5" Snap-Fit Igniter Button, For AAA Type Igniter
- Replace the defect push buttons and easy change the ignitor to new For the threaded, screw-on type, see Weber part 30158201.
- Chrome Plated Service AAA Batter Igniter Cp 1.5 Diameter
- Threaded screw on rubber push button
- For Weber AAA battery sized electronic modules
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
Dimensions: 0.79 x 0.79 x 1.18 inches
See On Amazon #19
MENSI Updated AA Battery Operated Push Button Igniter Spark Generator for Gas Grill, Stove, Fire Pit 22mm Mounting Hole Only One Exit
Asin: B07ZF8WM86 | Ean: 0747045380970 | UPC: 747045380970
High Spark Voltage--- Output Volatge Over 18Kv Easy Igniter Your Fireplace Or Grill Stove.
Quality Items---Certified Igniter With New Button Design To Enlarge Spark Effiency.
One Exit--- This Igniter Only Accept Connect One Spark Electrode Aa Battery Igniter Is Not Included, Before Using, You Need To Open The Switch And Insert An Aa Battery Inside. （It Can't Replace Aaa Battery Type Igniter)）Mounting Thread M22 Not 18Mm.
Same Dimension---Same Aa Battery Igniter Dimension With 22Mm Mounting Thread Only The Push Button Is Updated So You Don't Need To Change Anything Of Your Propane Gear..
Features
- New Updated Button--- Our new design push button igniter improve the sparker effiency and more comfortable when pushing, the new switch designed in pop-up type rather than the old type push only for other old design. MOUNTING THREAD M22
- Same Dimension---Same AA battery igniter dimension with 22mm mounting thread only the push button is updated so you don't need to change anything of your propane gear.
- High Spark Voltage--- Output Volatge over 18KV easy igniter your fireplace or grill stove
- One Exit--- This igniter only accept connect one spark electrode AA battery igniter is not included, before using, you need to open the switch and insert an AA battery inside. It Can't replace AAA battery Type Igniter) MOUNTING THREAD M22 NOT 18MM
- Quality items---certified igniter with new button design to enlarge spark effiency
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
Dimensions: 2.00 x 3.00 x 2.00 Inches | Weight: 0.02 pounds
See On Amazon
Looking For Something Else?
Search