LyxPro Suspension Anti-Vibration Shockmount for Side-Address Microphones
Asin: B09F19PTG6 | Ean: 0843812164351 | UPC: 843812164351
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Locking Knob: The Angle Of The Shock Mount Can Be Locked Into Position With The Locking Knob.
Heavy-Duty Elastic Band: The Heavy-Duty Elastic Bands Suspend The Microphone In The Center Of The Basket, And Prevent Shocks And Vibrations That Can Radiate Through The Mic Stand From Reaching The Microphone.
All-Metal Construction: The Lyxpro Shockmount Is A Durable Studio Accessory That Is Built To Last. The All-Metal Construction Assures Microphone Security.
Stand Adapter: A Metal Mic Stand Adapter Assures A Durable And Secure Connection Between The Shock Mount And Mic Stand. The Standard 5/8"-27 Thread Fits Any Mic Stand With A 5/8" Stud.
Features
- ELIMINATES NOISE: Prevents Unwanted Vibrations That Can Travel Through a Mic Stand and Affect the Performance of the Microphone
- STAND ADAPTER: A Metal Mic Stand Adapter Assures a Durable and Secure Connection Between the Shock Mount and Mic Stand. The Standard 5/8-27 Thread Fits Any Mic Stand With a 5/8 Stud
- LOCKING KNOB: The Angle of the Shock Mount Can Be Locked Into Position With the Locking Knob
- ALL-METAL CONSTRUCTION: The LyxPro Shockmount Is a Durable Studio Accessory That Is Built to Last. The All-metal Construction Assures Microphone Security
- HEAVY-DUTY ELASTIC BAND: The Heavy-duty Elastic Bands Suspend the Microphone in the Center of the Basket, and Prevent Shocks and Vibrations That Can Radiate Through the Mic Stand From Reaching the Microphone
- See more on Amazon...
Brand: LyxPro | Manufacturer: LyxPro
See On Amazon Similar To LyxPro Suspension AntiVibration Shockmount for
#1
Boseen Microphone Shock Mount Mic Holder - Anti Vibration Spider Shockmount Compatible with Many Condenser Mics Like AT2020 MXL 770 MXL 990 Samson G Track Pro Rode Procaster NT1-A Neumann U87 etc.
Asin: B01C5DCW2I | Model: 4330232056 | PartNumber: 4330232056 | Ean: 0889284308411 | UPC: 889284308411
◮Durable And Adjustable-The Shock Mount Was Totally Made Of Heavy-Duty Solid Metal, Except The Elastic Band And Pad. It Also Came With Mounting Pads To Protect The Bottom Of The Mic. Features An Angle Adjustable Locking Knob With A 5/8 Inch Screw Hole, Which Can Be Easily Attached To Any Universal Mic Boom Arm Or Stand..
◮Best Service - We Promise To Provide Timely Response Within 24 Hours And Lifelong Technical Guidance..
◮! Note ! - 1. The Shock Mount Is Not Compatible With Handheld Mic, Such As Sm58, Q2u, Atr2100. 2. It’S Also Not Suitable For Many Usb Microphone With Function Knobs, Such As Fifine, Blue Yeti/Snowball, Razer. (The Threads’ Diameters Which Are Less Than 20Mm Are Not Suitable. Many Usb Microphones’ Bottom Threads Are 5/8 Inch Which Is Far Less Than 20 Mm.) 3. Microphones Without Threads At The Bottom Cannot Be Tightened On Our Shock Mount, Such As At2035/2050, Heil Pr40..
◮Applicable For Many Mic Types - One Shock Mount Is Equipped With 4 Different Bottom Screws, Which Can Compatible With Multiple Microphone Styles, For Instance, At(2020, 2020 Usb), Rode(Nt1-A, Procaster, Podcaster, K2, Ntk, Nt2000, Nt2-A, Nt1000), Samson(C01, C03, C01u, C03u, Cl7, Cl8), Mxl(990, 770, R77, Tempo, V67g, 2006), Akg(P120, P220, P420) , Blue(Ember, Bird Sl, Babybottle Sl, Spark Sl Except Yeti, Snowball, Nano), Neumann U87 And Scarlett Cm25..
Features
- Anti vibration and noise - This shock mount mic holder can isolate condenser mics from most physical vibration, floor, and stand noise effectively. And it s ideal for recording, podcasting, broadcasting and more. It will make your broadcast or singing voice sound better.
- Applicable for many mic types - One shock mount is equipped with 4 different bottom screws, which can compatible with multiple microphone styles, for instance, AT(2020, 2020 USB), Rode(NT1-A, Procaster, Podcaster, K2, NTK, NT2000, NT2-A, NT1000), Samson(C01, C03, C01U, C03U, CL7, CL8), MXL(990, 770, R77, TEMPO, V67G, 2006), AKG(P120, P220, P420) , Blue(Ember, Bird SL, Babybottle SL, Spark SL except Yeti, Snowball, Nano), Neumann U87 and Scarlett Cm25.
- Durable and Adjustable-The shock mount was totally made of Heavy-duty solid metal, except the elastic band and pad. It also came with mounting pads to protect the bottom of the mic. Features an angle adjustable locking knob with a 5/8 inch screw hole, which can be easily attached to any universal mic boom arm or stand.
- ! NOTE ! - 1. The shock mount is not compatible with handheld mic, such as SM58, Q2U, ATR2100. 2. It s also not suitable for many USB microphone with function knobs, such as Fifine, Blue Yeti/Snowball, Razer. (The threads diameters which are less than 20mm are not suitable. Many USB microphones bottom threads are 5/8 inch which is far less than 20 mm.) 3. Microphones without threads at the bottom cannot be tightened on our shock mount, such as AT2035/2050, Heil PR40.
- Best service - We promise to provide timely response within 24 hours and lifelong technical guidance.
- See more on Amazon...
Brand: Boseen | Manufacturer: Boseen
Dimensions: 3.20 x 5.10 x 4.30 inches | Weight: 0.72 Pounds
See On Amazon #2
M10 Rubber Studs Shock Absorber Anti-Vibration Isolator Mounts, Rubber Cylindrical Vibration Isolation Mount, for Air Compressors, Garage Motor, Diesel Engines(with Non-Slip Nuts, 4 Pack Double Stud)
Asin: B089GQWK1Q | Model: M10*28 D40*H30 VV | PartNumber: M10*28 D40*H30 VV | Ean: 0190344599282 | UPC: 190344599282
Reducing Noice→The M10 Rubber Isolator Mounts With Studs And Lock-Nuts Is Widely Used For Vibration, Impact And Noise Control Of Welders And Other Equipment As A Damping Element; Protect The Body’S Normal Work And Get Good Surroundings, Damping Noise Reduction Effect Is Obvious; In Radio Equipment And Instruments, It Protects Machine Vibration Interference And Has A Good Buffering Effect. Supports Up To 864Lbs For All 4 Pcs.
Easy Installation→All You Have To Do Is To Place The Devices Holes In The Screws And Fasten The Nuts Of The Mounts, Set Includes All Anchoring Accessories..
Widely Application→Design To Shock Absorption Of Heavy Duty Mini Split Heat Pumps，Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Diesel Engines, Gasoline Engines, Water Pumps, Electron Components, Medical Equipment, Home Appliance, Mechanical Equipment, Office Facilities, Aviation, Construction, Automobile Etc..
Strong Quality →Material: Metal+Rubber; Made Of Soft And Durable Rubber And High Rigidity Steel Zinc Coating，Simple Geometrical Design Supports Dynamic Performance And Stability Under Lateral (Sideways) Forces.
Features
- More Convenient and Cost-effective with Lock nuts 4 Pack M10 Rubber motor mounts with 8pcs M10 Hex Lock-nuts ; Thread Size: 0.39"(Dia) x 1.1"(H) /M10 x 28mm; Rubber Size 1.57''(Dia) x 1.18''(H)/(40mm x 30mm); Overall Height: 3.39''/86mm; VV type Compatible with most devices.
- STRONG QUALITY Material: Metal+Rubber; Made of Soft and Durable Rubber and high Rigidity steel zinc coating Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces
- REDUCING NOICE The M10 rubber isolator mounts with studs and lock-nuts is widely used for vibration, impact and noise control of welders and other equipment as a damping element; Protect the body s normal work and get good surroundings, damping noise reduction effect is obvious; In radio equipment and instruments, it protects machine vibration interference and has a good buffering effect. Supports up to 864lbs for all 4 pcs
- WIDELY APPLICATION Design to shock absorption of Heavy duty Mini Split Heat Pumps Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, diesel engines, Gasoline Engines, water pumps, Electron components, medical equipment, home appliance, mechanical equipment, office facilities, aviation, construction, automobile etc.
- EASY INSTALLATION All you have to do is to place the devices holes in the screws and fasten the nuts of the Mounts, Set includes all anchoring accessories.
- See more on Amazon...
Brand: EASYEAH | Manufacturer: ZH
Weight: 1.20 pounds
Warranty: WARNING:NOT SUITABLE FOR KIDS UNDER 12 YEARS DUE TO SMALL PARTS
See On Amazon #3
M8x23mm Rubber Studs Shock Absorber Anti-Vibration Isolator Mounts, 30x20mm Rubber Cylindrical Vibration Isolation Mount for Air Compressors Garage Motor Diesel Engines 4 PCS, with 8PCS M8 Locknuts
Asin: B089GX4788 | Model: M8*8,VV30*20+2G8*23 | PartNumber: M8*8,VV30*20+2G8*23 | Ean: 0190344599329 | UPC: 190344599329
Reducing Noice→The M8 Rubber Isolator Mounts With Studs And Lock-Nuts Is Widely Used For Vibration, Impact And Noise Control Of Welders And Other Equipment As A Damping Element; Protect The Body’S Normal Work And Get Good Surroundings, Damping Noise Reduction Effect Is Obvious; In Radio Equipment And Instruments, It Protects Machine Vibration Interference And Has A Good Buffering Effect. Supports Up To 582Lbs For All 4 Pcs.
Easy Installation→All You Have To Do Is To Place The Devices Holes In The Screws And Fasten The Nuts Of The Mounts, Set Includes All Anchoring Accessories..
Widely Application→Design To Shock Absorption Of Heavy Duty Mini Split Heat Pumps，Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Diesel Engines, Gasoline Engines, Water Pumps, Electron Components, Medical Equipment, Home Appliance, Mechanical Equipment, Office Facilities, Aviation, Construction, Automobile Etc..
Strong Quality →Material: Metal+Rubber; Made Of Soft And Durable Rubber And High Rigidity Steel Zinc Coating, Simple Geometrical Design Supports Dynamic Performance And Stability Under Lateral (Sideways) Forces.
Features
- More Convenient and Cost-effective with Lock nuts 4 Pack M8 Rubber motor mounts with 8pcs M8 Hex Lock-nuts ; Thread Size: 0.31"(Dia) x 0.91"(H) /M8 x23mm; Rubber Size 1.18''(Dia) x 0.79''(H)/(30mm x20mm); Overall Height: 2.6''/66mm; VV type Compatible with most devices.
- STRONG QUALITY Material: Metal+Rubber; Made of Soft and Durable Rubber and high Rigidity steel zinc coating, Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces
- REDUCING NOICE The M8 rubber isolator mounts with studs and lock-nuts is widely used for vibration, impact and noise control of welders and other equipment as a damping element; Protect the body s normal work and get good surroundings, damping noise reduction effect is obvious; In radio equipment and instruments, it protects machine vibration interference and has a good buffering effect. Supports up to 582lbs for all 4 pcs
- WIDELY APPLICATION Design to shock absorption of Heavy duty Mini Split Heat Pumps Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, diesel engines, Gasoline Engines, water pumps, Electron components, medical equipment, home appliance, mechanical equipment, office facilities, aviation, construction, automobile etc.
- EASY INSTALLATION All you have to do is to place the devices holes in the screws and fasten the nuts of the Mounts, Set includes all anchoring accessories.
- See more on Amazon...
Brand: EASYEAH | Manufacturer: ZH
Warranty: WARNING:NOT SUITABLE FOR KIDS UNDER 12 YEARS DUE TO SMALL PARTS
See On Amazon #4
M10 Rubber Studs Shock Absorber Anti-Vibration Isolator Mounts 4 Packs, Rubber Cylindrical Vibration Isolation Mount for Air Compressors Garage Motor Diesel Engines(with 8PCS Non-Slip Nuts)
Asin: B0B7BPYJBR | Model: M10,VV40*30+2G10*28 | PartNumber: M10,VV40*30+2G10*28
Reducing Noice→The Rubber Mounts With Studs And Lock Nuts M10, Which Used To Reduce Noise And Shock Absorption - Supports Up To 860Lbs For All 4 Pcs..
Widely Application→ Design To Shock Absorption Of Heavy Duty Mini Split Heat Pumps, Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines Etc..
Easy Installation→All You Have To Do Is To Place The Devices Holes In The Screws And Fasten The Nuts Of The Mounts, Set Includes All Anchoring Accessories..
Size → Please Refer To The Details Page For Specific Sizes; The Nuts Is M10 And Universal In Size And Compatible With Most Device..
Features
- STRONG QUALITY Material: Metal+Rubber;Made of Durable Rubber (high durometer) and steel zinc coating,Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces.
- SIZE Please refer to the details page for specific sizes; The nuts is M10 and universal in size and compatible with most device.
- REDUCING NOICE The Rubber Mounts with Studs and Lock Nuts M10, which used to reduce noise and shock absorption - Supports up to 860lbs for all 4 pcs.
- EASY INSTALLATION All you have to do is to place the devices holes in the screws and fasten the nuts of the Mounts, Set includes all anchoring accessories.
- WIDELY APPLICATION Design to shock absorption of Heavy duty Mini Split Heat Pumps, Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines etc.
- See more on Amazon...
Brand: BOPOREAE | Manufacturer: ZH
Warranty: WARNING: NOT SUITABLE FOR KIDS UNDER 12 YEARS DUE TO SMALL PARTS BUILT-IN BLADE WITH FUNCTIONAL SHARP EDGES AND SHARP TIPS
See On Amazon #5
Cherbo Rubber Studs Shock Absorber M8 30x20mm 4 Pack Anti Vibration Rubber Isolator Mounts Cylindrical Vibration Isolation Mount for Air Compressors, Garage Motor, Diesel Engines
Asin: B0BX64193S | Model: CL30(3020) | PartNumber: CL30(3020)
High Quality: The Rubber Shock Absorber Are Made Of Durable Rubber And Steel Zinc Coating, Resilient And Anti-Aging. The Metal Stud Is Two Pieces Terminated And Bonded Within The Rubber That Perform Better Isolation Than Go All The Way Through The Rubber. High Durometer, Loadbearing Is 176 Lbs For All 4 Pcs, Torsion Up To 8 N·M..
Easy Installation: Set Includes All Anchoring Accessories, You Only Have To Place The Devices Holes In The Screws And Fasten The Nuts Of The Anti Vibration Mounts..
Wide Application: Anti Vibration Pads Widely Used For Mini Split Heat Pumps, Air Compressor, Mini Split Wall Mounting Bracket, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines Etc ..
Anti-Vibration & Reducing Noice: M8 Rubber Isolator Mounts With Studs And Nuts Is Widely Used For Vibration, Impact And Noise Control Of Welders And Other Equipment As A Damping Element. It Have A Good Buffer In The Radio Equipment, Instruments, Protect Machine Vibration Interference..
Features
- Universal Rubber Mounts: 30x20 mm/ 1.18" x 0.79" (D x H) Mechanical vibration damping mounts with M8 threaded studs. Including: 4-Pack Rubber Vibration Isolator Mount.
- Anti-Vibration & Reducing Noice: M8 Rubber isolator mounts with studs and nuts is widely used for vibration, impact and noise control of welders and other equipment as a damping element. It have a good buffer in the radio equipment, instruments, protect machine vibration interference.
- High Quality: The rubber shock absorber are made of durable rubber and steel zinc coating, resilient and anti-aging. The metal stud is two pieces terminated and bonded within the rubber that perform better isolation than go all the way through the rubber. High durometer, loadbearing is 176 lbs for all 4 pcs, torsion up to 8 N m.
- Wide Application: Anti vibration pads widely used for Mini Split Heat Pumps, Air Compressor, Mini Split Wall Mounting Bracket, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines etc .
- Easy Installation: Set includes all anchoring accessories, you only have to place the devices holes in the screws and fasten the nuts of the anti vibration mounts.
- See more on Amazon...
Brand: Cherbo | Manufacturer: Argni
See On Amazon #6
12Pack Vgoohobby Heavy Duty Anti-Vibration Shock Absorption Damping Rubber Balls for RC Quadcopter FPV Gimbal Camera Mount
Asin: B07WGPVZM6 | Model: XZ015 | PartNumber: XZ015 | Ean: 0763846887487 | UPC: 763846887487
Made Of High Quality Rubber,Reduce The Vibrations Between The Camera And Rc Fpv Drone..
Package Includes 12Pcs In Black Color..
Bearing Weight:120G-150G..
Size:20Mm (Ball Height) X 17Mm (Central Outer Dia) X 7.0Mm (Inside Mounting Hole Dia).
Features
- Dual-head design,widely used in PTZ connection and FPV system.It is the aerial photography player's good helper.
- Size:20mm (Ball Height) x 17mm (Central Outer Dia) x 7.0mm (Inside Mounting Hole Dia)
- Made of high quality rubber,reduce the vibrations between the camera and RC FPV drone.
- Bearing weight:120g-150g.
- Package includes 12PCS in Black color.
- See more on Amazon...
Brand: Vgoohobby | Manufacturer: Vgoohobby
See On Amazon #7
NATGAI Ceiling Spring Vibration Isolator Hangers for A/C Air Handler Bedroom Theater Studio, Anti Vibration, 110 Lb Capacity, 1.20" Deflection(4 Pack)
Asin: B08RYKRLKJ | Model: NN148 | PartNumber: NN148 | Ean: 5438077645100
Easy Installation: Featuring A Bolt Hole On The Base, It Offers Rigid Mounting, Especially Suitable For Supporting Machinery. Installation Is Straightforward, Whether On Ceilings, Floors, Walls, Ducts, Or Other Surfaces, Requiring No Complex Tools Or Professional Skills. Clear Installation Steps And Instructions Accompany The Product, Enabling Anyone To Install It Quickly And Easily..
Complete Package: Each Set Includes 4 Spring Vibration Isolators With A Capacity Of 110 Pounds, Sufficient For Most Standard Installation Needs. The Packaging Is Both Attractive And Sturdy, Ensuring The Product Remains Undamaged During Transportation. Clear Packaging Labels And Instructions Make It Easy For Users To Identify And Use The Product..
Versatile Applications: This Shock Absorber Finds Its Use In A Wide Range Of Settings, Including Bedrooms, Studios, Home Theaters, Houses, Hotels, Bars, Karaoke Rooms, And More. It Can Be Easily Mounted On Ceilings, Walls, Pumps, And Other Surfaces To Effectively Reduce Noise And Vibration. Whether For Personal Or Commercial Use, It Offers The Perfect Solution For Creating A Peaceful And Comfortable Environment..
Precise Specifications: Measuring 100Mm*45Mm*50Mm/4''*1.8''*2'', The Ceiling Spring Vibration Isolator Caters To Various Installation Needs. The Bolt Size Is 5/16'' (M8) With A Weight Of 0.4Kg, Making It Lightweight For Easy Handling And Installation. It Boasts A Maximum Load Capacity Of 50Kg (110Lbs) The Recommended Spacing Between Each Isolator Is 24'', Ensuring Optimal Vibration Reduction. For Instance, 63~99 Isolators Are Required For A Room Area Of 215~322 Sq Ft..
Features
- Premium Quality: Crafted with 3mm thick steel, high-grade springs, and silicone material, this vibration isolator excels in vibration absorption, ensuring optimal performance. It fully meets the stringent requirements of interior decoration, delivering long-lasting stability and reliability. The meticulous craftsmanship and choice of materials guarantee durability and robustness.
- Precise Specifications: Measuring 100mm*45mm*50mm/4''*1.8''*2'', the ceiling spring vibration isolator caters to various installation needs. The bolt size is 5/16'' (M8) with a weight of 0.4kg, making it lightweight for easy handling and installation. It boasts a maximum load capacity of 50kg (110lbs) The recommended spacing between each isolator is 24'', ensuring optimal vibration reduction. For instance, 63~99 isolators are required for a room area of 215~322 sq ft.
- Easy Installation: Featuring a bolt hole on the base, it offers rigid mounting, especially suitable for supporting machinery. Installation is straightforward, whether on ceilings, floors, walls, ducts, or other surfaces, requiring no complex tools or professional skills. Clear installation steps and instructions accompany the product, enabling anyone to install it quickly and easily.
- Versatile Applications: This shock absorber finds its use in a wide range of settings, including bedrooms, studios, home theaters, houses, hotels, bars, karaoke rooms, and more. It can be easily mounted on ceilings, walls, pumps, and other surfaces to effectively reduce noise and vibration. Whether for personal or commercial use, it offers the perfect solution for creating a peaceful and comfortable environment.
- Complete Package: Each set includes 4 spring vibration isolators with a capacity of 110 pounds, sufficient for most standard installation needs. The packaging is both attractive and sturdy, ensuring the product remains undamaged during transportation. Clear packaging labels and instructions make it easy for users to identify and use the product.
- See more on Amazon...
Brand: NATGAI | Manufacturer: NATGAI
See On Amazon #8
uxcell Rubber Mounts 4pcs M6x18mm Male Vibration Isolator Shock Absorber D20mmxH10mm
Asin: B0B4WX412Q | Model: a22033000ux1227 | PartNumber: a22033000ux1227
Compact And Stable: Simple Geometry Supports Dynamic Performance And Stability Under Lateral (Sideways) Forces. In Equipment And Instruments, It Protects The Machine From The Interference Of Vibration And Has Good Buffering Capacity..
Applications: Wide Use In Gasoline Generators, Air Compressors, Welding Machines, Garage Doors, Flushing Pumps, Impact Pumps, Air Conditioners, Wall Fans, Washing Machines, And Generators..
Damping Element: As The Damping Element Of Welding Machines And Other Equipment, It Can Protect The Normal State Of The Equipment And Obtain A Good Working Environment. The Effect Of Damping And Noise Reduction Is Very Obvious..
Male Thread Size: M6 X 18Mm / M6 X 0.71"; Package Content: 4Pcs X Rubber Mount.
Features
- Product Name: Rubber Mounts; Material: Metal, Rubber; Color: Black, Silver Tone; Metal Surface Treatment: Zinc Plated; Rubber Size: 20 x 10mm / 0.79" x 0.39"(D*H)
- Male Thread Size: M6 x 18mm / M6 x 0.71; Package Content: 4pcs x Rubber Mount
- Compact and Stable: Simple geometry supports dynamic performance and stability under lateral (sideways) forces. In equipment and instruments, it protects the machine from the interference of vibration and has good buffering capacity.
- Damping Element: As the damping element of welding machines and other equipment, it can protect the normal state of the equipment and obtain a good working environment. The effect of damping and noise reduction is very obvious.
- Applications: Wide use in gasoline generators, air compressors, welding machines, garage doors, flushing pumps, impact pumps, air conditioners, wall fans, washing machines, and generators.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
AMGSH Ceiling Vibration Damping Mounts, 4 Pack Spring Vibration Isolator Hangers, 110Lb Capacity, 1.2 Deflection Ceiling Spring Vibration Isolator for A/C Air Handler Home Theaters, Studios, Hotels
Asin: B0CRBKRDWK | Model: MGS0102-1 | PartNumber: MGS0102-1
Easy Installation: Designed For Hassle-Free Installation, These Vibration Hangers Feature A 5/16 Inch (M8) Pre-Drilled Bolt Hole On A Sturdy Metal Frame Base. Equipped With A Matched Coupling Nut And Washer, You Can Effortlessly Mount These Shockproof Elastomeric Hangers On Ceilings, Floors, Walls, Ducts, Havc Systems, And More..
Note: For Optimal Performance, Maintain A Recommended Distance Of 24 Inches Between Each Pair Of Isolators. E.G. 63~99 Isolators Are Needed For A Room Aera Of 215~322 Sq Ft..
Versatile Usage: Perfect For Diverse Spaces Like Home Theaters, Bedrooms, Studios, Hotels, Bars, And Gyms, These Spring Isolators Offer Effective Noise Control. Utilizing Resilient Hanger-Suspended Ceilings In Conjunction With Floor Isolation Systems Ensures The Most Effective Control Of Noise, Effectively Reducing Sound Transfer Between Louder Spaces And The Areas Below..
Advanced Vibration Control & Sturdy Support: Amgsh's Ceiling Isolation Hangers Feature A Silicon-Infused Red Component, Surpassing Traditional Rubber In Vibration Absorption Capabilities. Crafted From High-Quality 3Mm Thick Steel, The Removable Mounting Frames Ensure Stable Support..
Features
- Precision Vibration Control Solution: Elevate your space with our vibration isolator, boasting dimensions of 4'' x 1.8'' x 2'' (100mm x 45mm x 50mm). With a sturdy 5/16'' (M8) bolt size, each isolator weighs a mere 0.4kg while supporting a maximum load of 50kg (110lbs).
- Advanced Vibration Control & Sturdy Support: AMGSH's ceiling isolation hangers feature a silicon-infused red component, surpassing traditional rubber in vibration absorption capabilities. Crafted from high-quality 3mm thick steel, the removable mounting frames ensure stable support.
- Easy Installation: Designed for hassle-free installation, these vibration hangers feature a 5/16 inch (M8) pre-drilled bolt hole on a sturdy metal frame base. Equipped with a matched coupling nut and washer, you can effortlessly mount these shockproof elastomeric hangers on ceilings, floors, walls, ducts, HAVC systems, and more.
- Versatile Usage: Perfect for diverse spaces like home theaters, bedrooms, studios, hotels, bars, and gyms, these spring isolators offer effective noise control. Utilizing resilient hanger-suspended ceilings in conjunction with floor isolation systems ensures the most effective control of noise, effectively reducing sound transfer between louder spaces and the areas below.
- NOTE: For optimal performance, maintain a recommended distance of 24 inches between each pair of isolators. e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
- See more on Amazon...
Brand: AMGSH | Manufacturer: AMGSH
See On Amazon #10
8Pack M8 Rubber Studs Shock Absorber Anti Vibration Isolator Mounts, M8-20mm Rubber Cylindrical Vibration Isolation Mount with 2 Threaded Studs, for Air Compressors, Pump, Garage Motor, Diesel Engines
Asin: B0987SVCNN | Model: ZQUS-RubberIsolator-8pcs-BLACK-210628 | PartNumber: ZQUS-RubberIsolator-8pcs-BLACK-210628 | Ean: 0613965478519 | UPC: 613965478519
Anti-Vibration Silent Block: In Audio Equipment And Instruments, This Anti-Vibration Rubber Isolator Mount Avoids Machine Vibration Interference, Having A Good Buffer.
Widely Application: Design To Shock Absorption Of Heavy Duty Mini Split Heat Pumps, Air Compressors, Water Pump, Harvester, Garage Motor, Generator, Diesel Engines, Gasoline Engines Etc.
Part Number: Zqus-Rubberisolator-8Pcs-Black-210628.
Breezy Installation: All You Have To Do Is To Place The Devices Holes In The Screws And Fasten The Nuts Of The Mounts, Set Includes All Anchoring Accessories.
Good Quality: Made Of High-Quality Rubber, It Has Great Elasticity,Plays A Good Buffer And Can Protect The Machine Well. The Metal Stud Is Two Pieces Terminated And Bonded Within The Rubber That Perform, More Durable, High Durometer.
Features
- UNIVERSAL DESIGN: Rubber Size: 20 x 30mm/0.8 inch x 1.2 inch (Dx H), Rubber Size: M8 x 23mm/M8 x 0.9 inch (DL), set of 8 pieces rubber vibration mounts, the nuts is M8 and universal in size and compatible with most device
- GOOD QUALITY: Made of high-quality rubber, it has great elasticity,plays a good buffer and can protect the machine well. The metal stud is two pieces terminated and bonded within the rubber that perform, more durable, high durometer
- ANTI-VIBRATION SILENT BLOCK: In audio equipment and instruments, This anti-vibration rubber isolator mount avoids machine vibration interference, having a good buffer
- BREEZY INSTALLATION: All you have to do is to place the devices holes in the screws and fasten the nuts of the Mounts, Set includes all anchoring accessories
- WIDELY APPLICATION: Design to shock absorption of Heavy duty Mini Split Heat Pumps, Air Compressors, Water Pump, Harvester, Garage Motor, Generator, Diesel Engines, Gasoline Engines etc
- Part number: ZQUS-RubberIsolator-8pcs-BLACK-210628
- See more on Amazon...
Brand: ZIQI | Manufacturer: ZIQI
See On Amazon
Looking For Something Else?
Search