SharkBite Replacement Water Filter Cartridge, Whole House Scale Prevention, SBHF1R
Asin: B09FFRXKZM | Model: SBHF1R | PartNumber: SBHF1R | Ean: 0697285259645 | UPC: 697285259645
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Efficient: Water Heater Filter System Replacment Cartridge Helps To Prevent Dirt, Corrosion, Sediment And Scale From Harming The Water Heater Filtration System.
Durable: Water Heater Filter Replacement Cartridge Helps To Prevent Wear And Tear And Save Energy.
Easy To Install: Filtration System Replacement Cartridge Is Easy To Install Using The Included Sharkbite Prolock Fittings.
Versatile: Water Heater Filter Replacement Cartridge Protects Both Tankless And Traditional Water Heaters.
Features
- HARD WATER FILTER SYSTEM REPLACEMENT: Hot water heater filter replacement cartridge allows your water heater to function at the best possible performance
- VERSATILE: Water heater filter replacement cartridge protects both tankless and traditional water heaters
- EFFICIENT: Water heater filter system replacment cartridge helps to prevent dirt, corrosion, sediment and scale from harming the water heater filtration system
- EASY TO INSTALL: Filtration system replacement cartridge is easy to install using the included SharkBite ProLock fittings
- DURABLE: Water heater filter replacement cartridge helps to prevent wear and tear and save energy
- See more on Amazon...
Brand: SharkBite | Manufacturer: SharkBite
Dimensions: 9.88 x 2.33 x 2.33 inches | Weight: 0.61 pounds
See On Amazon Similar To SharkBite Replacement Water Filter Cartridge
#1
SharkBite Max 1/2 Inch Coupling, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR008A
Asin: B0C4QYTNK9 | Model: UR008 | PartNumber: UR008 | Ean: 0697285035249 | UPC: 697285035249
Strong And Durable: Straight Coupling Features A Reinforced Stainless Steel Collar Which Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Water Service Coupling Is Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Straight Coupler Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass pipe connectors are perfect for making easy connections between two pieces of PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: Straight coupling features a reinforced stainless steel collar which locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Straight coupler is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Water service coupling is rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: US - Reliance Worldwide Corporation
Dimensions: 1.01 x 2.07 x 1.01 inches
See On Amazon #2
SharkBite Max 1/2 Inch 90 Degree Elbow, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR248A
Asin: B0C4QWMXST | Model: UR248A | PartNumber: UR248A | Ean: 0697285056459 | UPC: 697285056459
Strong And Durable: 90 Degree Elbow Coupling Features A Reinforced Stainless Steel Collar Which Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Specs: 90 Degree Elbows Can Withstand 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: 90 Degree Hose Elbow Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push to connect brass elbow pipe connectors are perfect for making easy connections between two pieces of PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools; elbow pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: 90 degree elbow coupling features a reinforced stainless steel collar which locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: 90 degree hose elbow is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- SPECS: 90 degree elbows can withstand 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: US Reliance - Worldwide Corporation
Dimensions: 1.01 x 1.95 x 1.95 inches
See On Amazon #3
SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A
Asin: B00A8HUG1S | Model: U710A | PartNumber: U710A | Ean: 0697285910874 | UPC: 697285910874
Durable And High Quality: Fitting Remover Is Made Of Durable And Lightweight Plastic With Wide Grip Handles By A Name You Know And Trust; Sharkbite's Quality And Performance Are Field-Proven And Trusted In The Plumbing Industry.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use Suitable For Commercial Repairs Or Home Improvement Projects.
Copper, Pex, Cpvc, Cts, Hdpe: Sharkbite Disconnect Clip Is Compatible With Copper Tubing, Cts, Cpvc, Hdpe, And Pex Fittings, And Connects All Three Types In Any Combination, Ideal For Working In Tight Work Spaces.
Features
- SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily; can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required
- COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces
- DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust; SharkBite's quality and performance are field-proven and trusted in the plumbing industry
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 4.35 x 0.45 x 6.30 inches | Weight: 0.01 Pounds
Warranty: 2 year manufacturer
See On Amazon #4
SharkBite Max 1/2 Inch Ball Valve, Push to Connect Brass Plumbing Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR22222A
Asin: B0C4VWXHDW | Model: UR22222 | PartNumber: UR22222 | Ean: 0697285069459 | UPC: 697285069459
Strong And Durable: Ball Valve Connector Features A Reinforced Stainless Steel Collar Which Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Water Valve Coupling Is Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Shutoff Valves Are Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass ball valve pipe connectors are perfect for making easy connections between two pieces of PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: Ball valve connector features a reinforced stainless steel collar which locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Shutoff valves are made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Water valve coupling is rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: SHARKBITE
Dimensions: 1.13 x 5.46 x 2.34 inches | Weight: 0.41 Pounds
See On Amazon #5
SharkBite Max 1/2 Inch MNPT Adapter, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR120A
Asin: B0C6BF8V63 | Model: UR120A | PartNumber: UR120A | Ean: 0697285047853 | UPC: 697285047853
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Pushfit Male Adapters Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Flex Male Adapter Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push male adapters are perfect for making easy transitions between CTS pipe to an FNPT threaded connections and quick connections to a PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Flex male adapter is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Pushfit male adapters are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
First Available: 06/23/2023
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 0.97 x 1.92 x 0.97 inches | Weight: 0.11 Pounds
Warranty: Warranty
See On Amazon #6
SharkBite 1/2 x 3/4 Inch MHT 90 Degree Hose Bibb, Multi Turn, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 24626LF
Asin: B076FX1M5Y | Model: 24626LF | PartNumber: 24626LF | Ean: 0697285246263 | UPC: 697285246263
Easy To Install: The Innovative Design Of The Sharkbite Brass Push Hose Bibb Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines; Remove Using A Disconnect Clip Or Disconnect Tongs.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use; Ideal For Replacement And New Construction Installation.
Versatile: Brass Push Hose Bibbs Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Bibb Features A Patented One-Piece 2.4-Inch Diameter Mounting Flange And Inlet Connection.
Features
- SHARKBITE 90-DEGREE HOSE BIBB: Multi-turn shut-off valve with mounting flange and inlet can be used for water flow regulation; ideal for working in tight spaces; combines a 3/4 inch garden hose outlet with a 1/2 inch or 3/4 inch push-to-connect inlet
- VERSATILE: Brass push hose bibbs work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; bibb features a patented one-piece 2.4-inch diameter mounting flange and inlet connection
- EASY TO INSTALL: The innovative design of the SharkBite brass push hose bibb allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; ideal for replacement and new construction installation
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 3.39 x 3.78 x 2.44 inches | Weight: 0.10 pounds
Warranty: Warranty
See On Amazon #7
SharkBite 1/2 Inch Stop Valve with Drain and Vent, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 24634LF
Asin: B075K69NYQ | Model: 24634LF | PartNumber: 24634LF | Ean: 0697285246348 | UPC: 697285246348
Easy To Install: The Innovative Sharkbite Brass Push Stop Valve With Drain Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines; Remove Using A Disconnect Clip Or Disconnect Tongs.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use.
Versatile: Brass Push Stop Valves Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Features A Durable Forged Body For Strength.
Features
- SHARKBITE BRASS PUSH STOP VALVE WITH DRAIN/VENT: Multi-turn valves can be used for water flow regulation; valves feature an integrated drain or vent for easy cold-weather maintenance and protection against freezing; ideal for working in tight spaces
- VERSATILE: Brass push stop valves work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; features a durable forged body for strength
- EASY TO INSTALL: The innovative SharkBite brass push stop valve with drain allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 3.01 x 2.38 x 2.92 inches | Weight: 0.46 pounds
Warranty: Warranty
See On Amazon #8
SharkBite Max 1/2 x 1/2 x 1/4 Inch Compression Tee Stop Valve, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR24983A
Asin: B0CNTJ7DG5 | Model: UR24983A | PartNumber: UR24983A | Ean: 0697285069787 | UPC: 697285069787
Easy To Install: This Innovative Stop Valve Features A Quarter-Turn Full-Port Brass Ball Valve That Allows For Easy On/Off Control Of The Supply Line; No Special Tools, Crimping, Glue, Or Soldering Needed; Can Be Installed In Wet Lines.
Certified: Service Stop Valves Are Rated To 160 Degrees F And 125 Psi.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use; Feature A Sleek Chrome Finish For An Attractive Appearance.
Versatile: Brass Push Tee Stop Fittings Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Can Be Rotated For Easier And Faster Installation.
Features
- BRASS PUSH TEE STOP VALVE: Brass push tee stop valves are used to add supply lines to fixtures and appliances such as dishwashers, humidifiers, and ice makers; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs
- VERSATILE: Brass push tee stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; can be rotated for easier and faster installation
- EASY TO INSTALL: This innovative stop valve features a quarter-turn full-port brass ball valve that allows for easy on/off control of the supply line; no special tools, crimping, glue, or soldering needed; can be installed in wet lines
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; feature a sleek chrome finish for an attractive appearance
- CERTIFIED: Service stop valves are rated to 160 degrees F and 125 PSI
- See more on Amazon...
Brand: SharkBite | Manufacturer: US Reliance - Worldwide Corporation
Dimensions: 0.10 x 2.87 x 1.56 inches
See On Amazon #9
SharkBite 3/4 Inch Push-to-Connect x 1 Inch MNPT High Flow Water Filter Installation Kit, 24660LF
Asin: B09FFPRQ89 | Model: 24660LF | PartNumber: 24660LF | Ean: 0697285246607 | UPC: 697285246607
Compatible With Tight Spaces: Hard Water Filter Installation Kit Ideal For Use In Tight Work Spaces.
Durable: Hot Water Heater Filter Installation Kit Is Corrosion Resistant For Long Lasting Durability And Reliability.
Versatile: Hard Water Filter System Installation Kit Compatible With Any Combination Of Copper, Pe-Rt, Cpvc, And Pex Pipes.
Easy To Use: Water Heater Filter System Installation Kit Features An Innovative Push-To-Connect Design Which Allows For Quick And Easy Installation; No Tools, Glue, Crimping Or Soldering Required.
Features
- WATER FILTRATION SYSTEM INSTALLATION KIT: Water filter installation kit provides everything you need to install a high flow filtration system in your home; includes adapters and disconnect clip
- EASY TO USE: Water heater filter system installation kit features an innovative push-to-connect design which allows for quick and easy installation; no tools, glue, crimping or soldering required
- COMPATIBLE WITH TIGHT SPACES: Hard water filter installation kit ideal for use in tight work spaces
- VERSATILE: Hard water filter system installation kit compatible with any combination of copper, PE-RT, CPVC, and PEX Pipes
- DURABLE: Hot water heater filter installation kit is corrosion resistant for long lasting durability and reliability
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 1.67 x 8.00 x 4.87 inches | Weight: 0.26 Pounds
See On Amazon #10
SharkBite 1/2 Inch Angle Stop x 1/2 Inch NPSM Click Seal Faucet Connector x 20 Inch, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 24657
Asin: B07611TLFQ | Model: 24657 | PartNumber: 24657 | Ean: 0697285246577 | UPC: 697285246577
Easy To Install: The Sharkbite Push-To-Connect Faucet Coupling Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines; Remove Using A Disconnect Clip Or Disconnect Tongs.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications; Allow For Hand Tightening And Make An Audible Click When A Secure Connection Is Made.
Versatile: Sharkbite Click Seal Faucet Water Supply Connectors Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes.
Features
- SHARKBITE BRASS PUSH CLICK SEAL FAUCET CONNECTOR: Faucet water line connector ensures a watertight and leak-free connection; features a 1/2-inch push-fit stop valve and a flexible hose with a Click Seal faucet connector; ideal for working in tight spaces
- VERSATILE: SharkBite Click Seal faucet water supply connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes
- EASY TO INSTALL: The SharkBite push-to-connect faucet coupling allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications; allow for hand tightening and make an audible click when a secure connection is made
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 24.00 x 4.00 x 1.50 inches | Weight: 0.50 Pounds
See On Amazon #11
SharkBite 1/2 Inch Push Cap, Pack of 4, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U514LFA4
Asin: B01N0RL7KQ | Model: U514LFA4 | PartNumber: U514LFA4 | Ean: 0697285023987 | UPC: 697285023987
Easy To Install: The Innovative Push-To-Connect Design Of The Sharkbite Plug End Caps Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines.
Specs: Made With Dzr Forged Brass, This Push End Stop Can Withstand 200 Degrees F And 200 Psi.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use Suitable For Commercial Repairs Or Home Improvement Projects; Approved For Underground And Behind-The-Wall Applications With No Access Panels.
Versatile: Pushfit End Caps Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Large Diameter Fittings (1-1/4 In. To 2 In.) Require A Stiffener When Connecting To Pex Pipe.
Features
- SHARKBITE BRASS PUSH CAP: This push-to-connect fitting allows you to plug the end of a pipe quickly and easily; ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**
- VERSATILE: Pushfit end caps work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe
- EASY TO INSTALL: The innovative push-to-connect design of the SharkBite Plug End Caps allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects; approved for underground and behind-the-wall applications with no access panels
- SPECS: Made with DZR forged brass, this push end stop can withstand 200 degrees F and 200 PSI
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 0.50 x 0.50 x 1.10 inches | Weight: 0.07 Pounds
Warranty: Manufacturer
See On Amazon #12
SharkBite 1/2 Inch Coupling, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U008LFA
Asin: B002STLFGE | Model: U008LFA | PartNumber: U008LFA | Ean: 0697285465626, 7241871050371, 5899406040049, 7785004538539, 0733353694489, 0783961697082 | UPC: 783961697082, 697285465626, 733353694489
Lead-Free: Made Of High-Quality Forged Dzr Brass That Is Lead-Free. Ball Valves, Shutoffs, And Compression Fittings, Are Safe For Potable Water Lines.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pros: All Sharkbite Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
Versatile: Sharkbite Plumbing Valve Fittings Fit Copper, Cpvc, And Pex Pipe And Connect All 3 Types In Any Combination.
Features
- INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue; Just push to create a quick watertight union with SharkBite pushfit connectors
- VERSATILE: SharkBite plumbing valve fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
- LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines
- PREFERRED BY THE PROS: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: US - Reliance Worldwide Corporation
Dimensions: 2.00 x 7.00 x 5.00 inches | Weight: 0.00 Pounds
Warranty: Manufacturer
See On Amazon #13
SharkBite Max 1/2 Inch Slip Ball Valve, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR24735
Asin: B0BY2W8KBK | Model: UR24735 | PartNumber: UR24735 | Ean: 0697285082106 | UPC: 697285082106
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force; Good Item To Keep On Hand For Freezes Or Other Emergency Repairs.
Certified: Slip Ball Valves Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: This Ball Valve Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push slip ball valves are perfect for making quick transitions between a copper and CPVC pipe only. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force; good item to keep on hand for freezes or other emergency repairs
- LEAD FREE: This ball valve is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Slip ball valves are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
First Available: 05/11/2023
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 2.15 x 6.16 x 1.12 Inches | Weight: 0.47 pounds
Warranty: Warranty
See On Amazon #14
SharkBite Max 1/2 Inch Ball Valve with Drain Vent and Mounting Bracket, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR24615A
Asin: B0C14XR6T2 | Model: UR24615A | PartNumber: UR24615A | Ean: 0697285069688 | UPC: 697285069688
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Ball Valves With Drain And Mounting Tab Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: This Ball Valve Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push ball valves are perfect for making quick transitions between a PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipes in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: This ball valve is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Ball valves with drain and mounting tab are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
First Available: 05/11/2023
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 1.91 x 5.46 x 2.34 inches
See On Amazon #15
SharkBite 1/2 x 1/2 Inch FNPT Adapter, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U072LFA
Asin: B002STM7FM | Model: U072LFA | PartNumber: U072LFA | Ean: 0697285465701 | UPC: 697285465701
Easy To Install: The Innovative Push-To-Connect Design Of The Sharkbite Push Female Adapters Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines.
Specs: Made With Dzr Forged Brass, This Female Adapter Can Withstand 200 Degrees F And 200 Psi.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use Suitable For Underground And Behind-The-Wall Applications With No Access Panels.
Versatile: Pushfit Female Connectors Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Large Diameter Fittings (1-1/4 Inches To 2 Inches) Require A Stiffener When Connecting To Pex Pipe.
Features
- SHARKBITE BRASS PUSH FEMALE ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an MNPT thread quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs
- VERSATILE: Pushfit female connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe
- EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push female adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels
- SPECS: Made with DZR forged brass, this female adapter can withstand 200 degrees F and 200 PSI
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 2.00 x 7.00 x 5.00 inches
Warranty: Lifetime
See On Amazon #16
SharkBite 1/2 x 3/8 Inch Compression Dual Outlet Angle Stop Valve, Quarter Turn, Push to Connect Brass Plumbing Fitting, PEX Pipe, PE-RT, CPVC, Copper Pipe, 25558LF
Asin: B0764DV9ZS | Model: 25558LF | PartNumber: 25558LF | Ean: 0697285031647 | UPC: 697285031647
Easy To Install: This Innovative Stop Valve Features A 1/2-Inch Push-To-Connect Inlet And Two 3/8-Inch Compression Outlets For Quick Installation; Features A Quarter-Turn Full-Port Brass Ball Valve For Easy Operation; No Special Tools, Crimping, Glue, Or Soldering Needed; Can Be Installed In Wet Lines.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use; Feature A Sleek Chrome Finish For An Attractive Appearance.
Versatile: Brass Push Angle Stop Fittings Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes.
Features
- SHARKBITE BRASS PUSH DUAL OUTLET ANGLE STOP VALVE: Brass push angle stop valves are used to control and shut off water flow to fixtures or appliances for maintenance and repair; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs
- VERSATILE: Brass push angle stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes
- EASY TO INSTALL: This innovative stop valve features a 1/2-inch push-to-connect inlet and two 3/8-inch compression outlets for quick installation; features a quarter-turn full-port brass ball valve for easy operation; no special tools, crimping, glue, or soldering needed; can be installed in wet lines
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; feature a sleek chrome finish for an attractive appearance
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 7.00 x 5.00 x 1.50 inches | Weight: 0.32 Pounds
Warranty: Warranty
See On Amazon #17
SharkBite Max 3/4 Inch Ball Valve x 3/4 Inch FIP x 18 Inch Stainless Steel Braided Flexible Water Heater Connector,Push to Connect Brass Plumbing Fitting,PEX Pipe, Copper, CPVC,PE-RT,HDPE,UR3088FX18BV
Asin: B0C4VVK3YL | Model: UR3088FX18BV | PartNumber: UR3088FX18BV | Ean: 0697285082359 | UPC: 697285082359
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Water Heater Hose Tubings With Ball Valves Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Flex Water Heater Hose Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push water heater connectors are perfect for making quick connections between a water heater and an existing PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Flex water heater hose is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Water heater hose tubings with ball valves are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: SHARKBITE
Dimensions: 2.38 x 17.82 x 1.38 inches | Weight: 1.03 Pounds
Warranty: Warranty
See On Amazon #18
SharkBite 1/4 Inch (3/8 Inch OD) x 1/2 Inch NPSM Faucet Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U3525LFA
Asin: B0052LCQDQ | Model: U3525LFA | PartNumber: U3525LFA | Ean: 0697285008076, 0731840710674 | UPC: 697285008076, 731840710674
Easy To Install: The Innovative Push-To-Connect Design Of The Sharkbite Brass Push Faucet Coupler Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines.
Specs: Made With Dzr Forged Brass, This Brass Faucet Connector Can Withstand 200 Degrees F And 200 Psi.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use; Suitable For Kitchen And Bath Faucet Installations.
Versatile: Pushfit Faucet Connectors Work Well With Pex, Cpvc, Pe-Rt, And Copper Pipes.
Features
- SHARKBITE BRASS PUSH FAUCET CONNECTOR: This SharkBite brass faucet connector features a 1/4 inch SharkBite push-to-connect end and a 1/2 inch female faucet connector on the other end; ideal for working in tight spaces; remove using a disconnect clip
- VERSATILE: Pushfit faucet connectors work well with PEX, CPVC, PE-RT, and copper pipes
- EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push faucet coupler allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; suitable for kitchen and bath faucet installations
- SPECS: Made with DZR forged brass, this brass faucet connector can withstand 200 degrees F and 200 PSI
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 1.61 x 1.61 x 1.40 inches | Weight: 0.09 Pounds
Warranty: Warranty
See On Amazon #19
SharkBite Max 1/2 Inch x 1/2 Inch Ball Valve with FNPT Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR22182A
Asin: B0C51V1Y2G | Model: UR22182A | PartNumber: UR22182A | Ean: 0697285069381 | UPC: 697285069381
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Ball Valves With Fnpt Connectors Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: This Ball Valve Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push ball valves are perfect for making quick transitions between a FNPT threaded end to a PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipes in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: This ball valve is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Ball valves with FNPT connectors are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 1.13 x 4.76 x 2.34 inches | Weight: 0.42 Pounds
See On Amazon #20
SharkBite 3/4 Inch Water Heater Connection Kit, Push to Connect Brass Plumbing Fittings, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22441LF
Asin: B00312CE4Y | Model: 22441LF | PartNumber: 22441LF | Ean: 0697285224414 | UPC: 697285224414
Easy To Install: This Intuitive Connection Kit Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines; Remove Using A Disconnect Clip Or Disconnect Tongs.
Specs: This Water Heater Connection Kit Can Withstand 200 Degrees F And 200 Psi.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use.
Compatibility: This Connection Kit Works Well With Pex, Copper, Cpvc, Hdpe, And Pe-Rt Pipes; Ideal For Working In Tight Spaces.
Features
- SHARKBITE WATER HEATER CONNECTION KIT: This installation kit includes (2) female connectors and (1) disconnection clip
- COMPATIBILITY: This connection kit works well with PEX, copper, CPVC, HDPE, and PE-RT pipes; ideal for working in tight spaces
- EASY TO INSTALL: This intuitive connection kit allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use
- SPECS: This water heater connection kit can withstand 200 degrees F and 200 PSI
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 6.00 x 13.00 x 5.00 inches | Weight: 0.00 Pounds
Warranty: Lifetime
See On Amazon
Looking For Something Else?
Search