Redrex Dual Gear Ender 3 Extruder with Two Washers Metal Drive Feeder Upgrade Kit Compatible with Creality Ender 3 V2 Pro,Ender 3 Neo Series,CR10 3D Printer TPU Filament Supported(Motor Shaft>21.5mm)
Asin: B09H6T3NNT | Model: RDX3D032 | PartNumber: RDX3D032
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Spring Adjustable Extruder】The Extrusion Spring Tension Could Be Adjusted By Tighten The Screw,Which Greatly Improves The Printing Accuracy And Feeding Issue..
【Kindly Reminder】:Please Calibrate The E-Steps From 100 To 139; Please Lubricate The Gears Before First Use;For 3D Printers With Filament Detector,As The Height Of Our Dual Gear Extruder May Be Different From The Original One, Please Print The Model To Rise Up The Filament Detector To Make Them At The Same Height;For Vyper Users,Please Swap The Motor Wire Sequence To Make It Turn Forward Instead Of Reverse.
【Application】:This All Metal Dual Drive Extruder Is Compatible With Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,Cr10 S Series 3D Printer.Only Suit For 3D Printers With Motor Shaft Over 20Mm,Please Measure The Shaft Length Before Placing The Order..
【Upgraded Idler Gear Design】This Idler Gear Is Upgraded With Two Washers On Both Sides, So The Sharp Gear Will Not Ride Against The Bottom Of The Arm Or Chew It Up..
Features
- Double Gear Extrusion Mechanism :The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
- Upgraded Idler Gear Design This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
- Spring Adjustable Extruder The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and feeding issue.
- Application :This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,CR10 S series 3D printer.ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.
- Kindly Reminder :Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use;for 3d printers with filament detector,as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height;for Vyper users,please swap the motor wire sequence to make it turn forward instead of reverse
- See more on Amazon...
Brand: REDREX | Manufacturer: Redrex
Dimensions: 1.96 x 0.98 x 2.20 inches | Weight: 0.13 Pounds
See On Amazon Similar To Redrex Dual Gear Ender 3
#1
Creality 3D Official Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printer Ugrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2
Asin: B09N8QQDSP | Model: CREALITYENDER3DUALZ | PartNumber: CREALITYENDER3DUALZ
【Smooth Running】 Upgrade Single Z-Axis Structure To A Dual Z-Axis Structure, Will Make The Printer More Easy To Leveling, Both Ends Of The X Axis Are Raised And Lowered Synchronously, Which Reduces Difficulty And Frequency Of Bed Leveling Obviously..
【After Sales Service】Creality 3D Pay Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【High Comparable】The Dual Z Axis Upgrade Kit Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D Printer. Easily Improve 3D Printers With Low Cost Efficiency To Dual Z Axis Mode..
【Stable Performance】 Compared With Closed Timing Belt, This 3D Printer Parts Set Still Retains The Design Of Stepper Motor To Ensure Screw Rod Smooth Operation..
Features
- Increased Accuracy Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
- Stable Performance Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
- Smooth Running Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
- High Comparable The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D printer. Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
- After Sales Service Creality 3D pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 3.94 x 15.55 inches | Weight: 2.01 pounds
See On Amazon #2
Official Creality Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Stepper Motor and Metal Power Supply Holder, Ender 3 pro upgrades for Ender 3/ Ender 3 Pro/Ender 3 V2
Asin: B07VJG4ZCG
Dustproof And Mute Design - Elaborate Craft, Good Sealing Performance, Good Dust-Proof Smooth Sliding, And Maximum Mute In High-Speed Operation..
After-Sales Service - If You Have Any Unsolvable Problems During Installation And Use The Ender 3 Pro Dual Z-Axis Upgrade Kit, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Smooth Running - Upgrading The Single Z-Axis Structure To A Dual Z-Axis Structure Will Make The Printer Easier To Leveling, Both Ends Of The X-Axis Are Raised And Lowered Synchronously, Which Reduces The Difficulty And Frequency Of Bed Leveling Obviously..
Excellent Performance - With An Upgraded Structure, The Ender 3 Dual Z-Axis Upgrade Kit Reduces The Layer Ripple Caused By Z-Axis Vibration, Avoiding Backlog Of Filament Thoroughly, Which Improves The Stability And Increases The Printing Performance Of The 3D Printers. The Ender 3 Pro Upgrade Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2 3D Printer..
Features
- Precise and Smooth Screw - Well made motor is efficient and reliable with high speed and low noise. The guide rail precision is P3-P7. The repeated positioning accuracy reaches 0.01mm. High loading ability and high running speed meet the high-speed running requirement.
- Excellent Performance - With an upgraded structure, the ender 3 dual z-axis upgrade kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves the stability and increases the printing performance of the 3D printers. The ender 3 pro upgrade is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2 3D printer.
- Dustproof and Mute Design - Elaborate craft, good sealing performance, good dust-proof smooth sliding, and maximum mute in high-speed operation.
- Smooth Running - Upgrading the Single Z-axis structure to a dual Z-axis structure will make the printer easier to Leveling, both ends of the X-axis are raised and lowered synchronously, which reduces the difficulty and frequency of bed leveling obviously.
- After-Sales Service - If you have any unsolvable problems during installation and use the ender 3 pro dual z-axis upgrade kit, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #3
UniTak3D Ender 3 Direct Drive Upgrade Conversion Bracket for Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer for B-MG&Dual Gear&Bowden Extruder(NOT for Neo Series,Extruder&Hotend NOT Include)
Asin: B09KG8MMQ2 | Model: Uni150 | PartNumber: Uni150
【Stable Operation】:The Holes Of The Split Type Conversion Bracket Are Perfectly Aligned, With Supports On Both Sides To Keep The Center Of Gravity In The Middle, And The Structure Is More Stable..
【Easy Installation】:No X,Y Or Z-Axis Build Volume Lost. No Firmware Or Wiring Modification.Just Tear Down The Original Ender 3 Series Plate And Mount This Direct Drive Upgrade Kit..
【Flexible Filament Supported】: Compared With Bowden Extrusion,This Direct Drive Extrusion Greatly Improves Print Quality Of Tpu And Other Flexible Materials..
【Outstanding Extrusion Control】:A Direct Drive Extruder Improves Extrusion And Retraction By Removing The Need For The Bowden (Ptfe) Tube. It Provides Precise Retraction And A Better Print Result..
Features
- Application :The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder.NOTE:Extruder or hotend are NOT included in the package;For Ender 3 V2 users, you can print the following fan cover(STL:5340394)
- Outstanding Extrusion Control :A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube. It provides precise retraction and a better print result.
- Stable Operation :The holes of the Split Type conversion bracket are perfectly aligned, with supports on both sides to keep the center of gravity in the middle, and the structure is more stable.
- Flexible Filament Supported : Compared with bowden extrusion,this direct drive extrusion greatly improves print quality of TPU and other flexible materials.
- Easy Installation :No X,Y or Z-axis build volume lost. No firmware or wiring modification.Just tear down the original Ender 3 series plate and mount this direct drive upgrade kit.
- See more on Amazon...
Brand: UniTak3D | Manufacturer: UniTak3D
Dimensions: 6.57 x 2.60 x 4.10 Inches | Weight: 0.40 Pounds
See On Amazon #4
Aokin Stainless Steel Extruder Wheel Gear 36 Teeth Drive Gear 3D Printer Parts for Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5/5 Pro/5 Plus, CR-10/10S, CR-10 S4, CR-10 S5, 5 Pcs with a Wrench
Asin: B09W1CN8FC | Ean: 0701715469044 | UPC: 701715469044
Size: Extruder Gear Out Diameter 11Mm/0.43Inch, Height 11Mm/0.43Inch, Inner Diameter 5Mm/0.2Inch, 36 Teeth, Weight 5G. Please Confirm Whether The Product Size Meets Your Needs Before Purchasing..
Aokin 3D Printer Extruder Gear Use High-Quality Raw Materials And Fine Workmanship, If You Have Any Question About Our Product, Please Feel Free To Contact Us, We Will Do Our Best For You..
Compatibility: The Drive Gear Fit For Creality 3D Printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 Plus, Cr-10, Cr-10S, Cr-10 S4, Cr-10 S5, Cr-10 Mini, Cr-10 Plus, And Mk7/Mk8 Extruder, Other Most 3D Printers..
Material: The 3D Printer Extruder Drive Gears Are Made Of Premium Stainless Steel, Strong And Sturdy, Good Bearing Capacity, Easy To Use, Improving Your 3D Printer Working Efficiency..
Features
- Package includes: 5 pcs stainless steel extruder driver gear and a 1.5mm wrench for the set screws.
- Material: the 3D printer extruder drive gears are made of premium stainless steel, strong and sturdy, good bearing capacity, easy to use, improving your 3D printer working efficiency.
- Size: extruder gear Out Diameter 11mm/0.43inch, Height 11mm/0.43inch, inner diameter 5mm/0.2inch, 36 teeth, Weight 5g. Please confirm whether the product size meets your needs before purchasing.
- Compatibility: the drive gear fit for Creality 3D Printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 Plus, CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10 Plus, and MK7/MK8 extruder, other most 3D printers.
- Aokin 3D printer extruder gear use high-quality raw materials and fine workmanship, if you have any question about our product, please feel free to contact us, we will do our best for you.
- See more on Amazon...
Brand: Aokin | Manufacturer: Aokin
See On Amazon #5
Creality 3D Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printers Dual Screw Rod Upgrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2
Asin: B0BVQZ2V2V | Model: Ender 3 Dual Z-axis Upgrade Kit | PartNumber: Ender 3 Dual Z-axis Upgrade Kit
【Stable Stepper Motor Performance】Compared With Closed Timing Belt, This 3D Printer Ender 3 V2 Upgrades Parts Set Still Retains The Design Of Stepper Motor To Ensure Screw Rod Smooth Operation..
【Improved Performance】Ender 3 V2 Dual Z Upgrade Kit Helps Reduce Wear And Tear On The Printer, Not Only Does It Improve The Printing Speed Of 3D Printers, It Can Also Significantly Improve Print Quality..
【Official Support Service】Creality Pays Great Attention To The Buyer's User Experience. If You Encounter Unsolvable Problems During Installation And Use, Have Any Questions Or Need Support, Please Contact Me Through Amazon, We Will Reply Within 24 Hours..
【High Compatibility】The Ender 3 Dual Z-Axis Upgrade Kit Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D Printer. Easily Improve 3D Printers With Low Cost Efficiency To Dual Z-Axis Mode..
【Effectively Helps Bed Leveling】 Ender 3 Pro Upgrades Kit, Upgrade Single Z-Axis Structure To A Dual Z-Axis Structure, Will Make The Printer More Easy To Leveling, Both Ends Of The X Axis Are Raised And Lowered Synchronously, Which Reduces Difficulty And Frequency Of Bed Leveling Obviously..
Features
- Increased Accuracy Ender 3 dual z-axis upgrade kit compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
- Effectively Helps Bed Leveling Ender 3 pro upgrades kit, upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
- Stable Stepper Motor Performance Compared with Closed Timing Belt, this 3D printer ender 3 v2 upgrades parts set still retains the design of stepper motor to ensure screw rod smooth operation.
- High Compatibility The Ender 3 dual z-axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D printer. Easily improve 3D printers with low cost efficiency to dual z-axis mode.
- Improved Performance Ender 3 V2 Dual Z Upgrade Kit helps reduce wear and tear on the printer, Not only does it improve the printing speed of 3D printers, It can also significantly improve print quality.
- Official Support Service Creality pays great attention to the buyer's user experience. If you encounter unsolvable problems during installation and use, have any questions or need support, please contact me through Amazon, we will reply within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 15.50 x 3.90 x 2.50 inches | Weight: 1.80 pounds
Warranty: No
See On Amazon #6
Creality Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor 3D Printer Screw Rod Kit for Ender -3 Pro/Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo
Asin: B0C1RM9CRH
【Dust Proof And Mute Design】Good Sealing Performance And Good Dust-Proof. Smooth Sliding And Mute Functions Make The 3D Printer Slide Smoother During Printing. Maximize Silence During High-Speed Operation, Even In Quiet Environments, Without Fear Of Noise.
【Original Quality】You Will Get Creality Dual Z-Axis Upgrade Kit. It Comes With All The Necessary Hardware And Instructions For Easy Installation.
【Multiple Compatible】This Dual Z-Axis Upgrade Kit Is Compatible With Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo. Upgrade Your Printer And Experience Improved Stability, Speed, And Precision.
【High Quality Motor】The Dual Z-Axis Upgrade Kit With A Stepper Motor Ensures Screw Rod Smooth Operation. A High Quality Motor Is Efficient And Reliable With High Speed And Low Noise, Making Leveling Easier.
Features
- Smoothly and Accurately The Dual Z-axis upgrade kit reduces the Z-axis wobble that can occur in a single Z-axis structure, resulting in even more precise and consistent prints. With this dual Z-axis kit, your printer's bed will move more smoothly and accurately, resulting in higher-quality prints
- High Quality Motor The Dual Z-axis Upgrade Kit with a stepper motor ensures screw rod smooth operation. A high quality motor is efficient and reliable with high speed and low noise, making leveling easier
- Dust Proof and Mute Design Good sealing performance and good dust-proof. Smooth sliding and mute functions make the 3D printer slide smoother during printing. Maximize silence during high-speed operation, even in quiet environments, without fear of noise
- Multiple Compatible This dual Z-axis upgrade kit is compatible with Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo. Upgrade your printer and experience improved stability, speed, and precision
- Original Quality You will get Creality dual Z-axis Upgrade Kit. It comes with all the necessary hardware and instructions for easy installation
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #7
Bigtreetech Upgrade Dual Gear Extruder, Double Gear MK8 Extruder 3D Printer Dual Driver Stock Feeder All Metal 1.75mm Filament Extruder Kit for CR-10S Pro/CR-10/ Ender 3 V2/Ender 3/Ender 3 Pro Series
Asin: B08D9CNHVN | Model: WGC000291 | PartNumber: WGC000291 | Ean: 0779303889987 | UPC: 779303889987
💓【Stable And Durable】All Metal Aluminum Alloy, High Quality Double Gear Extrusion, Compared With Ordinary Plastic Drive, This High Aluminum Metal Filament Extruder Is Stable And Durable. The Idler Gear Has Been Upgraded With A Brass Washer Added Between The Stainless Steel Gear And The Aluminum Housing, So The Gear Does Not Collide Seriously With The Housing, Which Helps Reduce Stock Extruder Wear..
💓【Imported Materials】The 3D Printer Dual Extruder Material Is Made Of Brand New Imported Aviation Aluminum Material And Processed By Cnc Imported From Japan. The Kit Does Not Include The Stepper Motor, Motor Bracket And Instructions, We Need To Make Them Ourselves. If You Need Some Installation Help, There Are Video Introductions Online, And You Can Seek Our Technical Help At Any Time..
💓【Adjustable Spring】The Tension Of The Extrusion Spring Can Be Adjusted By Tightening The Screw, Which Greatly Improves Printing Accuracy And Paper Feeding Problems. Strong Extrusion End Spring Enhances Feeding Strength And Ensures Stable Pushing Of Filaments Into The Hot End Of The Printer. Suitable For Most Types Of Filament, Such As Abs, Pla, Tpu, Pteg Etc..
💓【Compatibility】Double Gear Mk8 Extruder, Perfect Replacement For 3D Printer Cr-10/ Cr-10S/ Cr-10S Pro/ Ender 3 (Initial Version)/Ender 3 V2/Ender 3 Pro/Ender 5/Tornado, Etc. 1.75 Mm Filament (Set Only For 3D Printers With Motor Shafts Exceeding 20Mm, Please Measure The Shaft Length Before Placing An Order.).
Features
- Upgraded Dual Extruder Dual gears and dual pneumatic combined extrusion structure, large extrusion force, enhanced feeding intensity, ensuring smooth feeding. The double gear rotation design locks the filament, which is beneficial to improve printing quality and reduce filament slipping, high-speed extrusion or retraction, better pressure to push the filament into the printer, less easy to lose steps, faster printing speed
- Compatibility Double gear mk8 extruder, perfect replacement for 3D printer CR-10/ CR-10S/ CR-10S Pro/ Ender 3 (initial version)/Ender 3 v2/Ender 3 pro/Ender 5/Tornado, etc. 1.75 mm filament (Set only for 3D printers with motor shafts exceeding 20mm, please measure the shaft length before placing an order.)
- Stable and Durable All metal aluminum alloy, high quality double gear extrusion, compared with ordinary plastic drive, this high aluminum metal filament extruder is stable and durable. The idler gear has been upgraded with a brass washer added between the stainless steel gear and the aluminum housing, so the gear does not collide seriously with the housing, which helps reduce stock extruder wear.
- Adjustable Spring The tension of the extrusion spring can be adjusted by tightening the screw, which greatly improves printing accuracy and paper feeding problems. Strong extrusion end spring enhances feeding strength and ensures stable pushing of filaments into the hot end of the printer. Suitable for most types of filament, such as ABS, PLA, TPU, PTEG etc.
- Imported Materials The 3d printer dual extruder material is made of brand new imported aviation aluminum material and processed by CNC imported from Japan. The kit does not include the stepper motor, motor bracket and instructions, we need to make them ourselves. If you need some installation help, there are video introductions online, and you can seek our technical help at any time.
- See more on Amazon...
Brand: BIQU | Manufacturer: N-A
See On Amazon #8
WINSINN Dual Gear Extruder, Ender 3 v2 Upgrade Motor Shaft>20mm, Compatible with Ender 3 Pro CR10 Series 3D Printer TPU Filament Drive Feed
Asin: B07SY745CF | Model: JCJCR10P | PartNumber: JCJCR10P | Ean: 0053742715589 | UPC: 053742715589
✔️【Stable And Durable】Upgraded Extruder Kit Made Of Aluminum Alloy Material, More Stable And Durable Than The Other Plastic One While Working. Double Gear Extrusion Mechanism, High Extrusion Force, Ensure Smooth Feeding And Gives Snappy Retractions..
✔️【Packing List & Warranty】1 X Dual Gear Extruder (This Kit Not Include The Stepper Motor, Motor Bracket And Instruction Manual). 1 Year Warranty. Each Product Of Winsinn Had Passed Strict Qc, If You Have Any Problems When You Use The Product, Just Contact Us, And We Will Help You Solve It At Any Time..
✔️【Kindly Reminder】Please Calibrate The E-Steps From 100 To 139..
✔️【Replacement Kit】Perfect Extruder Replacement Kit For Ender 3 V2, Ender 3 Pro, Ender 3, Ender 5 Pro, Cr10 S Series, Tornado, Etc..
Features
- Purchase Note ONLY for 3D Printers with motor shaft over 20mm, please measure the shaft length before placing order. Due to Creality batches, the original motor shaft of the Ender 3 series printer may not be perfectly fit for our dual gear. You can replace the full size of 42mm high stepper motor if the original motor shaft is too short to Install the gear.
- Replacement Kit Perfect extruder replacement kit for Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 Pro, CR10 S series, Tornado, etc.
- Stable And Durable Upgraded extruder kit made of aluminum alloy material, more stable and durable than the other plastic one while working. Double gear extrusion mechanism, high extrusion force, ensure smooth feeding and gives snappy retractions.
- Kindly Reminder Please calibrate the E-steps from 100 to 139.
- Packing List & Warranty 1 x Dual Gear Extruder (This Kit NOT include the stepper motor, motor bracket and instruction manual). 1 Year Warranty. Each product of WINSINN had passed strict QC, If you have any problems when you use the product, just contact us, and we will help you solve it at any time.
- See more on Amazon...
Brand: WINSINN | Manufacturer: WINSINN Technology Ltd
Dimensions: 0.10 x 0.22 x 0.16 Inches
See On Amazon #9
UniTak3D Ender 3 V2 Adjustable Z-Axis Leadscrew Top Mount Plastic Z-Rod Bearing Holder Upgrade for Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR10 S,CR10 3D Printers(Pack of 2Pcs)
Asin: B094R52TNW | Ean: 0788380805308 | UPC: 788380805308
【Application】This Z-Rod Bearing Holder Is Widely Used For Ender 3 V2, Ender 3 Pro, Ender 3, Cr10, And Cr 10S 3D Printers..
【Material】:Plastic.
【Size】:40*34*19Mm /1.6*1.3*0.75Inch.
【Feature】This Lead Screw Bearing Holder Will Help Eliminate Z Axis Wobble, And Greatly Improve Print Accuracy..
Features
- Newly Upgraded If your Z-rod is a little bent, this upgraded adjustable Z-Axis Leadscrew Top Mount can be more flexible and convenient to fix the screw than the old version.
- Feature This lead screw bearing holder will help eliminate Z axis wobble, and greatly improve print accuracy.
- Application This Z-Rod Bearing Holder is widely used for Ender 3 V2, Ender 3 Pro, Ender 3, CR10, and CR 10S 3D printers.
- Size :40*34*19mm /1.6*1.3*0.75inch
- Material :Plastic
- See more on Amazon...
Brand: UniTak3D | Manufacturer: UniTak3D
See On Amazon #10
Creality 3D Official Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printer Ugrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2
Asin: B0B467SP19 | Model: Dual Z Kit-Ender 3 | PartNumber: Dual Z Kit-Ender 3
❤【Smooth Running】 Upgrade Single Z-Axis Structure To A Dual Z-Axis Structure, Will Make The Printer More Easy To Leveling, Both Ends Of The X Axis Are Raised And Lowered Synchronously, Which Reduces Difficulty And Frequency Of Bed Leveling Obviously..
❤【After Sales Service】Creality 3D Pay Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
❤【High Comparable】The Dual Z Axis Upgrade Kit Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2/ 3D Printer.Easily Improve 3D Printers With Low Cost Efficiency To Dual Z Axis Mode..
❤【Stable Performance】 Compared With Closed Timing Belt, This 3D Printer Parts Set Still Retains The Design Of Stepper Motor To Ensure Screw Rod Smooth Operation..
Features
- Increased Accuracy Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
- Stable Performance Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
- Smooth Running Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
- High Comparable The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/ 3D printer.Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
- After Sales Service Creality 3D pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.36 x 15.35 x 4.33 Inches
See On Amazon #11
ChowThink Dual Z-axis V2.0 Synchronous Wheels Kit for Ender 3 pro,Ender 3 V2,Ender 3 neo, Ender 3 pro,Ender 3 V2 neo 3D Printer Upgrade Accessories
Asin: B0CX54ZSJ5 | Ean: 6973880790726
【Excellently Machined】The Gear Has Been Precision Machined Many Times, So That The Gear And The Belt Contact More Closely, And The Movement Is Smoother..
【Note】This Kit Is Specially Designed And Made For Ender 3，Ender 3 Pro，Ender 3 V2，Ender 3 Neo，Ender 3 V2 Neo，With Higher Adaptability.Please Note: This Kit Requires Two Tensioner Setting Screws (M5*8) And Two M5 T-Nuts, Which Must Be Prepared By Yourself.
【Polyurethane Synchronous Belt】Wider And Thicker Polyurethane Synchronous Belt, Built-In Reinforced Fiber, Industrial Grade Precision, Strength, Durability..
【High Quality Aluminum Wheel】 Gear Made Of All Aluminum Alloy With Anodized Red And Black Two Colors Surface For A More Personalized Appearance And Longer Service Life..
Features
- 3D Printer Custom Kit Custom 25 teeth, 28mm diameter synchronous wheel and 10mm wide synchronous belt, with greater tooth depth, better anti-slip, synchronization.Ideal for 3D printer Z-axis use.
- High Quality Aluminum wheel Gear made of all aluminum alloy with anodized red and black two colors surface for a more personalized appearance and longer service life.
- Excellently Machined The gear has been precision machined many times, so that the gear and the belt contact more closely, and the movement is smoother.
- Polyurethane synchronous belt Wider and thicker polyurethane synchronous belt, built-in reinforced fiber, industrial grade precision, strength, durability.
- Note This kit is specially designed and made for Ender 3 Ender 3 pro Ender 3 V2 Ender 3 neo Ender 3 V2 neo with higher adaptability.Please note: This kit requires two tensioner setting screws (M5*8) and two M5 T-nuts, which must be prepared by yourself
- See more on Amazon...
Brand: ChowThink | Manufacturer: ChowThink
See On Amazon #12
Official Creality New Update Ender 3 Dual Z-axis Upgrade Kit with Metal Power Supply Holder, Stepper Motor and Lead Screw for Ender 3 V2, Ender 3 Pro, Ender 3 3D Printer
Asin: B0B2C9Y8Q6 | Model: ca-ssg | PartNumber: ca-ssg
[Excellent Performance]With Updagrated Structure, Dual Z-Axis Kit Reduces The Layer Ripple Caused By Z-Axis Vibration, Avoiding Backlog Of Filament Thoroughly, Which Improves 3D Printing Stability And Increases The Printing Performance..
[Dust-Proof And Mute Design] Elaborate Craft, Good Sealing Performance, Better Dust-Proof Smooth Sliding And Maximum Mute In High-Speed Operation..
[Precise And Smooth Screw] Precise And Smooth Screw Has High Precision And High Quality. The Guide Rail Precision Is P3-P7. The Repeated Positioning Accuracy Reaches 0.01Mm. High Loading Ability And High Running Speed Meet The High-Speed Running Requirement. High Quality Motor Is Efficient And Reliable With High Speed And Low Noise..
[Easy To Install And Use] Just Plug The One-To-Two Motor Cable Directly Into The Motherboard, Not Need Modders, Soldering Or Changing Boards. Please Refer To The Video And A+ Page For Installation..
Features
- [application]100% Creality Original Ender 3 Dual Z-axis Upgrade Kit compatible with Ender 3, Ender 3 Pro, Ender 3 V2 and Voxelab Aquila 3D Printer.
- [Easy to install and use] Just plug the one-to-two motor cable directly into the motherboard, not need modders, soldering or changing boards. Please refer to the video and A+ page for installation.
- [Excellent Performance]With updagrated structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves 3D printing stability and increases the printing performance.
- [Precise and Smooth Screw] Precise and smooth screw has high precision and high quality. The guide rail precision is P3-P7. The repeated positioning accuracy reaches 0.01mm. High loading ability and high running speed meet the high-speed running requirement. High quality motor is efficient and reliable with high speed and low noise.
- [Dust-proof and Mute Design] Elaborate craft, good sealing performance, better dust-proof smooth sliding and maximum mute in high-speed operation.
- See more on Amazon...
Brand: Cregrant3D | Manufacturer: Creality
See On Amazon #13
Updated Dual Gear Ender 3 Extruder, Dual Hardened Steel Drive Gear CR10S Pro Extruder Blue Compatible for Ender 3 V2, Ender 3 Pro,Ender 3 Max,Ender 5/CR10,3D Printer 1.75mm Filament Extruder,
Asin: B0B6PBKJYG | Model: extruder blue | PartNumber: extruder blue
【Improved Installation - Dual Gear Extruder】 Compared To The Previous Direct Drive Extruder, This Arm Fittings Have Been Upgraded To Add A Brass Washer Between The Stainless Steel Gear And The Aluminum Housing, So The Gear Teeth Will Not Collide Badly To Housing And Prevent The Gear From "Eating" The Aluminum Housing. Idler Gear Is Fixed With A Half Thread Screw For Smoothly Running And More Durble..
【 3D Printer Extruder Motor Shaft Over 20Mm】 Note: Creality 3D Printers Use Different Motor Parts On Their Series Printers Even On Same Model,Please Check Carefully If The Motor Shaft Height Is Over 20Mm,So It Will Have Enough Lenght To Install The Extruder Outgoing Drive Gear.After Installation,It Is Recommended To Set E-Steps To 139,Then Increase Or Decrease The Unit Value According To The Actual Printing Effect..
【More Compatibility】This Dual Drive Gear Extruder Was Original Designed For Cr-10S Pro, But Also Fits Ender 3 V2, Ender 3 Pro, Ender 3, Cr-10 Series, Ender 5,S5 Tornado ,Etc 1.75Mm Filament Fdm 3D Printers ..
【3Pcs Ender 3 Springs,3 Different Extrusion Pressure】3 Different Spring Pressures Meet Most Types Of Wire (Hard Or Soft) Feed Requirements, Paired With Exclusive Designed Thumbscrews And Spring Adapters ,Make It Easy And Simple To Adjust Extrusion Strength. Better To Control The Squeezing Force To Ensure The Filament Is Steadily Pushed Into The Hot End Of The Printer.Ideal For Filament Extruder Abs Pla Wood Tpu Pteg,Etc..
Features
- Hardened Steel Drive Gear Latest upgraded CR10S PRO all metal double gear extruder is equipped with high precision cnc work hardened steel gears with nickel plated treatment. Gear curved teeth is round and leass beat,not harm the filament.Greatly improve the durability and reliability of extrusion gears.
- 3pcs Ender 3 Springs,3 different extrusion pressure 3 different spring pressures meet most types of wire (hard or soft) feed requirements, paired with exclusive designed thumbscrews and spring adapters ,make it easy and simple to adjust extrusion strength. Better to control the squeezing force to ensure the filament is steadily pushed into the hot end of the printer.Ideal for filament extruder ABS PLA Wood TPU PTEG,etc.
- Improved Installation - dual gear extruder Compared to the previous direct drive extruder, this arm fittings have been upgraded to add a brass washer between the stainless steel gear and the aluminum housing, so the gear teeth will NOT collide badly to housing and prevent the gear from eating the aluminum housing. Idler gear is fixed with a half thread screw for smoothly running and more durble.
- More compatibility This dual drive gear extruder was original designed for CR-10S PRO, but also fits Ender 3 V2, Ender 3 Pro, ender 3, CR-10 series, ender 5,S5 Tornado ,etc 1.75mm filament FDM 3D Printers .
- 3D Printer extruder Motor Shaft Over 20mm Note: Creality 3D printers use different motor parts on their series printers even on same model,please check carefully if the motor shaft height is over 20mm,so it will have enough lenght to install the extruder outgoing drive gear.After installation,it is recommended to set E-steps to 139,then increase or decrease the unit value according to the actual printing effect.
- See more on Amazon...
Brand: SAPLUSREPRAP | Manufacturer: 5Aplusreprap
See On Amazon #14
Haldis 3D Dual Gear Extruder, Upgraded Aluminum Alloy Block Bowden Extruder 1.75mm Filament Dual Drive Feed for Creality CR-10S CR10S PRO Ender-3 Ender 3PRO Ender 5
Asin: B09D9DJV5V | Ean: 0728224974364 | UPC: 728224974364
【3D Printer Extruder Replacement Kit】:Perfect Extruder Replacement Kit For Creality 3D Printers Cr-10/ Cr-10S/ Cr-10S Pro/ Ender 3/ Tornado, Etc. Note:Comes With All Parts,You Need To Diy,But It Easy To Install..
【Package Includes】: 1 X Extruder Kit;Extra 2 Stainless Steel Gears For Gift.Extruder Hotend Contains All The Necessary Screws And Parts..
【1.75Mm Filament Accept】:For 1.75Mm Filament.Better Pressure Pushes The Filament Into The Printer Nozzle..
【Stable And Durable】:Upgraded Extruder Kit Made Of Aluminum Alloy Material, More Stable And Durable Than The Other Plastic One While Working..
Features
- DUAL GEAR EXTRUDER :Double gear extrusion mechanism, high extrusion force, ensure smooth feeding and gives snappy retractions.
- STABLE AND DURABLE :Upgraded extruder kit made of aluminum alloy material, more stable and durable than the other plastic one while working.
- 3D PRINTER EXTRUDER REPLACEMENT KIT :Perfect extruder replacement kit for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc. Note:comes with all parts,you need to DIY,but it easy to install.
- 1.75mm FILAMENT ACCEPT :For 1.75mm Filament.Better pressure pushes the filament into the printer nozzle.
- PACKAGE INCLUDES : 1 x extruder kit;extra 2 stainless steel gears for gift.extruder hotend contains all the necessary screws and parts.
- See more on Amazon...
Manufacturer: Haldis 3D
See On Amazon #15
Sovol Upgrade 3D Printer Kit with All Metal Dual Gear Extruder Feeder, Capricorn Premium XS Bowden Tubing, Pneumatic Couplers & Bed-Level Springs for Ender 3 V2/3/3 Pro/5 CR-10 Series/10S/20/20 Pro
Asin: B08Y5T1392
100% Original Capricorn Xs Series Tubing - Capricorn Ptfe Is Well Regarded As The Highest Quality Ptfe Tubing In All Of 3D Printing. The Tight Tolerances Make Sure That The Filament Is Lead Directly To The Hotend With As Little Room For Error As Possible Between The Extruder And The Hotend. Capricorn Ptfe Xs Series Is Rated For Withstanding The Highest Temperatures In The Market Which Is Perfect For Printing Exotic Filaments Such As Abs, Nylon, And Polycarbonate. Fits For 1.75Mm Filament..
Sovol Customer Service - Any Questions You May Have About This Product, Please Feel Free To Contact Us On Amazon And We Will Reply Promptly..
Creality Die Springs Are Extra Firm And Help To Hold The Bed Level For Longer While Being More Resistant Against Wearing Out And Loosing Compression. Level The Bed Once And It Should Hold For More Prints With These High Performance Stiff Springs. Pc4-M6 & Pc4-M10 Pneumatic Fittings Are Also Included For Replacement Use On Any Stock Creality Hotends..
All Metal Dual Gear Extruder - Instantly Provide Improved Print Quality And Reduce Filament Slipping By Firmly Grasping The Filament Between Two Threaded Wheels Locked Together By A Dual Gear Rotating Design. No More Skipped Steps When Extruding At High Speeds Or After Retractions. Print Faster With This Superior Design, Which Is Able To Feed Much More Filament Into The Hotend In The Same Period Of Time Than Stock Plastic Extruders..
Features
- Compatible Printer Models Include - CR-10/ CR-10S / CR-10S Pro/ CR-6SE/ Ender 3 / Ender 3 pro / Ender 5 / Ender 5 pro/ Ender 6/ Ender-7/ Tornado. INSTALLATION GUIDE: Once the extruder has been installed, manually change the e steps/mm in the Marlin firmware to 139 steps/mm by going to Control>Motion>Steps/mm in the Menu.
- All Metal Dual Gear Extruder - Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together by a dual gear rotating design. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders.
- 100% Original Capricorn XS Series Tubing - Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Fits for 1.75mm Filament.
- Creality die springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends.
- Sovol Customer Service - Any questions you may have about this product, please feel free to contact us on Amazon and we will reply promptly.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Weight: 0.14 Pounds
See On Amazon #16
HICTOP Ender 3 Dual Z-axis Upgrade Kit Ender 3 Pro Upgrades Compatible with Ender 3/Ender 3 Neo, Ender 3 pro, Ender 3 V2/Ender 3 V2 Neo 3D Printer
Asin: B08T1VJ9ZT | Model: enter3-SZZ-JP1 | PartNumber: enter3-SZZ-JP1 | Ean: 0649910021615 | UPC: 649910021615
3 All The Parts You Need To Upgrade Ender 3, Ender 3 Pro, Ender 3 V2 To Dual Z Rods Are Included In The Box..
5 There Is A Full Metal Plate To Lock The Power Supply, We Are Sure That You Will Like This Design..
4 The Ender 3 Dual Z-Axis Upgrade Kit Is Compatible With Creality Ender 3, Ender 3 Neo, Ender 3 Pro, Ender 3 V2, Ender 3 V2 Neo 3D Printers.
2 Length Of The Rod Lead Screw For The Ender 3 V2 Dual Z Upgrade Kit : 365Mm/ 14.4Inch..
Features
- 1 Ender 3 Dual Z-axis Upgrade Kit, to make the structure more stable and the printing of higher accuracy
- 2 Length of the Rod Lead Screw for the ender 3 V2 dual z upgrade kit : 365mm/ 14.4inch.
- 3 All the parts you need to upgrade ender 3, ender 3 pro, ender 3 V2 to dual Z rods are included in the box.
- 4 The ender 3 dual z-axis upgrade kit is compatible with Creality ender 3, ender 3 Neo, ender 3 pro, ender 3 V2, ender 3 V2 Neo 3D printers
- 5 There is a full metal plate to lock the power supply, we are sure that you will like this design.
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
Dimensions: 3.54 x 15.75 x 3.53 Inches
Warranty: 1 year manufacturer warranty
See On Amazon #17
Creality Ender 3 Accessories Dual Z Axis Kit Lead Screw Upgrade Kit with Metal Power Supply Holder and Stepper Motor for Ender 3,Ender 3 Pro, Ender 3 V2,Ender 3 Neo,Ender 3 V2 Neo 3D Printer
Asin: B08RJDW5W6 | Model: Ender 3 pro-Dual Z | PartNumber: Ender 3 pro-Dual Z | Ean: 0738627014314 | UPC: 738627014314
Stable Stepper Motor Performance：Ender 3 Upgrade Dual Z-Axis Kit, High Quality Stepper Motor Is Effcient And Reliable With High Speed And Low Noise, Ensure Screw Rod Smooth Operation..
High Precision And High Transmission：Precise And Smooth Screw Has High Precision And High Guality. The Guide Rail Precision Is P3-P7, The Repeated Positioning Accuracy Reaches 0.01Mm. High Loading Ability And High Running Speed Meet The High-Speed Running Requirement.
Dust-Proof And Mute Design: Ender 3 Upgrade Dual Z-Axis Kit Helps Reduce Wear And Tear On The Printer, Good Sealing Performance, Good Dust-Proof Smooth Sliding And Maximum Mute In High-Speed Operation.
Upgrade Single Z-Axis Structure To A Dual Z-Axis Structure, Will Make The Printer More Easy To Leveling, Both Ends Of The X Axis Are Raised And Lowered Synchronously, Which Reduces Difficulty And Frequency Of Bed Leveling Obviously.
Features
- Compatible with Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, and Ender 3 V2 Neo. Upgrade your printer and experience improved stability, speed, and precision.
- Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously
- Stable Stepper Motor Performance Ender 3 upgrade dual z-axis kit, high quality stepper motor is effcient and reliable with high speed and low noise, ensure screw rod smooth operation.
- Dust-proof and Mute Design: Ender 3 upgrade dual z-axis kit helps reduce wear and tear on the printer, good sealing performance, good dust-proof smooth sliding and maximum mute in high-speed operation
- High Precision and High Transmission Precise and smooth screw has high precision and high guality. The guide rail precision is P3-P7, the repeated positioning accuracy reaches 0.01mm. High loading ability and high running speed meet the high-speed running requirement
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #18
Upgrade Ender 3 Dual Gear Extruder, MK8 Extruder 3D Printer Dual Driver Feed Metal Feeder Extruder Kit Replacement for 3D Printer CR-10/ CR-10S/ CR-10S Pro/Ender 3 v2/Ender 3 Pro (Dual Connector)
Asin: B09HC68B42 | Model: DGER-CR10PRO-1set | PartNumber: DGER-CR10PRO-1set
Update Install : Compared To The Previous Ender 3 Extruder, The Arm Fittings Have Been Upgraded To Add A Brass Washer Between The Stainless Steel Gear And The Aluminum Housing, So The Gear Teeth Will Not Collide Badly To Housing, And Prevent The Gear From "Eating" The Aluminum Housing. Idler Gear Is Fixed By A Half Thread Screw, Keep Running Smoothly, And More Durble..
Tip：( 3D Printer Extruder Motor Shaft Over 20Mm) Creality 3D Printers Use Different Extruder Motor Parts On Their Series Printers Even On Same Model, Please Check Carefully If The Motor Shaft Height Is Over 20Mm, So It Will Have Enough Lenght To Install The Drive Gear Of This Extruder..
High Tension: The Prowerful Extrusion Ender 3 Springs , Enhancing The Feed Strength, And Ensure Stable To Push Filament Into The Printer Hotend. Suitable For Most Kinds Of Filament, Such As Abs Pla Wood Tpu Pteg, Etc..
Dual Gear Extruder More Compatibility : This Dual Drive Gear Extruder Was Original Designed For Cr-10S Pro, But Also Fits Ender 3 V2, Cr-10 Series, Ender 5, S5 Tornado And Other 1.75Mm Filament Extruder Fdm 3D Printers..
Features
- Package Include: TWO Connector upgraded Ender 3 dual gear extruder , Right-handed 3D Printer extruder kit .
- Dual Gear Extruder More Compatibility : This dual drive gear extruder was original designed for CR-10S PRO, but also fits Ender 3 V2, CR-10 series, ender 5, S5 Tornado and other 1.75mm filament extruder FDM 3D Printers.
- Update Install : Compared to the previous ender 3 extruder, the arm fittings have been upgraded to add a brass washer between the stainless steel gear and the aluminum housing, so the gear teeth will NOT collide badly to housing, and prevent the gear from eating the aluminum housing. Idler gear is fixed by a half thread screw, keep running smoothly, and more durble.
- High Tension: The prowerful extrusion ender 3 springs , enhancing the feed strength, and ensure stable to push filament into the printer hotend. Suitable for most kinds of filament, such as ABS PLA Wood TPU PTEG, etc.
- Tip ( 3D Printer extruder Motor Shaft Over 20mm) Creality 3D printers use different extruder motor parts on their series printers even on same model, please check carefully if the motor shaft height is over 20mm, so it will have enough lenght to install the drive gear of this extruder.
- See more on Amazon...
Brand: SAPLUSREPRAP | Manufacturer: 5Aplusreprap
Weight: 0.20 Pounds
See On Amazon #19
Dual Gear Extruder, Upgraded Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality Ender 3 CR10 CR-10 Pro CR-10S Tornado (Red)
Asin: B093GC92JR | Ean: 0728224781658 | UPC: 728224781658
【3D Printer Extruder Replacement Kit】:Perfect Extruder Replacement Kit For Creality 3D Printers Cr-10/ Cr-10S/ Cr-10S Pro/ Ender 3/ Tornado, Etc. Note:Comes With All Parts,You Need To Diy,But It Easy To Install..
【Package Includes】: 1 X Extruder Kit;Extra 2 Stainless Steel Gears For Gift.Extruder Hotend Contains All The Necessary Screws And Parts..
【1.75Mm Filament Accept】:For 1.75Mm Filament.Better Pressure Pushes The Filament Into The Printer Nozzle..
【Stable And Durable】:Upgraded Extruder Kit Made Of Aluminum Alloy Material, More Stable And Durable Than The Other Plastic One While Working..
Features
- DUAL GEAR EXTRUDER :Double gear extrusion mechanism, high extrusion force, ensure smooth feeding and gives snappy retractions.
- STABLE AND DURABLE :Upgraded extruder kit made of aluminum alloy material, more stable and durable than the other plastic one while working.
- 3D PRINTER EXTRUDER REPLACEMENT KIT :Perfect extruder replacement kit for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc. Note:comes with all parts,you need to DIY,but it easy to install.
- 1.75mm FILAMENT ACCEPT :For 1.75mm Filament.Better pressure pushes the filament into the printer nozzle.
- PACKAGE INCLUDES : 1 x extruder kit;extra 2 stainless steel gears for gift.extruder hotend contains all the necessary screws and parts.
- See more on Amazon...
Brand: Xirbbo | Manufacturer: xirbbo
See On Amazon
Looking For Something Else?
Search