HPDAVV CO2 Cartridge Adapter with M16x1.5 Male Thread & 5/8-24UNF Female Thread for PCP Air 88g Airsource Disposable, Black
Asin: B09HC89BC6
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Converts 88G Co2 Disposable Cartridge To A Standard Co2 Paint Ball Tank..
A M16*1.5 Standard Thread Adaptor That Quick Change The Place Of 88G Co2 Capsule Threads Bottle..
Features
- The CO2 cylinder adapter make of high-quality alloy, durable and practical to use. Increase the air-tight cushion to prevent CO2 leaking.
- A M16*1.5 standard thread adaptor that quick change the place of 88g CO2 Capsule Threads Bottle.
- Converts 88G CO2 Disposable cartridge to a standard CO2 Paint Ball Tank.
- See more on Amazon...
Brand: HPDAVV | Manufacturer: HPDAVV
See On Amazon Similar To HPDAVV CO2 Cartridge Adapter with
#1
CGA-320 to CGA-580 Adapter # 806 CO2 Carbon Dioxide Bottle to Argon Flowmeter
Asin: B06W5P767K | Model: 0188 | PartNumber: 0188 | Ean: 0747252013852 | UPC: 747252013852
Brand: SuperiorProducts
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #2
CO2 Quick Adapter with 60in High-pressure Hose, CO2 Quick-Connect Compatible with Duo/Terra/Art/E-Duo/E-Terra/Crystal 3.0/GAIA Soda Maker, CGA320 Valve for Large CO2 Tank
Asin: B0CTCBZ5CR | Model: QC-H | PartNumber: QC-H
【No Pressure Reducer Required】: Since Carbon Dioxide Turns Into Liquid Under Pressure, The Pressure In The Carbon Dioxide Cylinder Is About 50 Bar No Matter How Much It Is Inflated, So There Is No Need For A Pressure Reducer. Note: When Choosing A Carbon Dioxide Cylinder Select The One That Is The Right Size For Your Room, If The Gas Leaks, The Carbon Dioxide Concentration Will Be Too High And There Will Be A Danger Of Suffocation..
【Easy To Install】:It Is Very Easy To Install And Use, Before Installing, Check Whether The Gas Cylinder Is Empty Or Not, Then Just Connect The Co2 Tank To The Adapter.(You Can Run The Hose Through A Hole In The Underside Of The Countertop Or Table Or Drill A Hole In The Back Panel Of The Bubbler.).
【Save Time & Money】: It Can Be Directly Connected To Large Co2 Tanks And Sparkling Water Soda Makers, You Don't Need To Change Bottles Frequently, It Is Suitable For Non-Siphon Co2 Tanks With Standard Cga320 Outlet Valve, With This Co2 Adapter Can Save You A Lot Of Time And Money..
【Quality Material】: It's Made Of High-Quality Plastic And Metal, Which Is Anti-Rust, Anti-Corrosion, Wear-Resistant, Anti-Aging, And Not Easy To Be Deformed, The Rubber Ring Is Made Of Food-Grade Material, Which Is Safe And Reliable, Avoiding The Problem Of Bursting And Expanding The Hose, And The Airtightness Is Better, And It Won't Transmit The Chemical Flavour..
Features
- 1.5m CO2 Adapter High Pressure Hose : CO2 adapter quick connector hose is compatible with DUO, E-Duo, ART, TERRA, E-Terra, Crystal 3.0 and Gaia (any new soda maker for QC cylinders), it can only deal with gas CO2 tank, not applicable to liquid CO2 tank, the 1.5m connecting cable makes it more convenient to use, and won't be troubled by the distance.
- Quality Material : It's made of high-quality plastic and metal, which is anti-rust, anti-corrosion, wear-resistant, anti-aging, and not easy to be deformed, the rubber ring is made of food-grade material, which is safe and reliable, avoiding the problem of bursting and expanding the hose, and the airtightness is better, and it won't transmit the chemical flavour.
- No pressure reducer required : Since carbon dioxide turns into liquid under pressure, the pressure in the carbon dioxide cylinder is about 50 bar no matter how much it is inflated, so there is no need for a pressure reducer. Note: When choosing a carbon dioxide cylinder select the one that is the right size for your room, if the gas leaks, the carbon dioxide concentration will be too high and there will be a danger of suffocation.
- Save Time & Money : It can be directly connected to large CO2 tanks and sparkling water soda makers, you don't need to change bottles frequently, it is suitable for non-siphon CO2 tanks with standard CGA320 outlet valve, with this CO2 adapter can save you a lot of time and money.
- Easy to install :It is very easy to install and use, before installing, check whether the gas cylinder is empty or not, then just connect the CO2 tank to the adapter.(You can run the hose through a hole in the underside of the countertop or table or drill a hole in the back panel of the bubbler.)
- See more on Amazon...
Brand: ADTIO | Manufacturer: ADTIO
See On Amazon #3
GrowlerWerks uKeg 64 CO2 Chargers 8g, Box of 10
Asin: B074VGR6ZD | Model: GWA1012-08-10 | PartNumber: GWA1012-08-10 | Ean: 0636123971677 | UPC: 636123971677
Guaranteed To Work With Ukeg 64.
Recyclable Disposable Chargers.
Use 1 Charger Per Ukeg Fill.
Pack Contains 10 Unthreaded Chargers.
Features
- Contains 8g of food grade CO2
- Pack contains 10 unthreaded chargers
- Guaranteed to work with uKeg 64
- Use 1 charger per uKeg fill
- Recyclable disposable chargers
- See more on Amazon...
Brand: GrowlerWerks | Manufacturer: GrowlerWerks
Dimensions: 0.69 x 2.60 x 0.69 inches | Weight: 0.10 pounds
See On Amazon #4
CGA320 G1/2 CO2 Cylinder Refill Adapter Hose - CO2 Refill Adapter Fill Station Connector Kit,For Soda Maker Filling for Tank Bottle, 36 Inch Hose, Not Compatible with DUO/TERRA/ART
Asin: B08PDXZYLH | Model: L-1 | PartNumber: L-1 | Ean: 0770487240342 | UPC: 770487240342
??[Safety Enough]Double Valve For Safe And Convenient To Use,With A Pressure Gauge To Ensure The Pressure Will Not Exceed The Pressure Specification Of The Recipient Tank(⚠⚠⚠Not Compatible With Duo/Terra/Art).
??[No-Worries After-Sale] This Refill Adapter Is Made Of High Quality Material,We Provide One Year Quality Guarantee,If Have Any Problem When Use Our Product, You Can Contact Us 24 Hours,We Will Provide You A Satisfied Solution.(⚠⚠⚠Not Compatible With Duo/Terra/Art).
??[Precautions】If The Vial Thimble Is Very Thick And Short And Cannot Be Inflated, Hose Will Expand, Please Replace The Thin Thimble Bottle.The Atmospheric Cylinder Should Have Sufficient Pressure, If There Is No Siphon Or Liquid Co2 In The Atmosphere Bottle, Need To Invert The Co2 Atmospheric Tank For Inflation, Please Read The Instructions Carefully.(⚠⚠⚠Not Compatible With Duo/Terra/Art).
??[Specification] The Refill Adapter Is Us Cga-320(G1/2),36 Inch Stainless Steel Braided Hose, 3000Psi Working Pressure, Thread For Large Co2 Tank(⚠⚠⚠Not Compatible With Duo/Terra/Art).
Features
- ??[Application]This soda maker refill adapter can be used to refill small CO2 tanks from larger CO2 tank, with 2 turn on/off valves and 1pressure gauge, easy to use ( Not Compatible with DUO/TERRA/ART)
- ??[Specification] The refill adapter is US CGA-320(G1/2),36 inch stainless steel braided hose, 3000PSI working pressure, thread for large CO2 tank( Not Compatible with DUO/TERRA/ART)
- ??[SAFETY ENOUGH]Double valve for safe and convenient to use,with a pressure gauge to ensure the pressure will not exceed the pressure specification of the recipient tank( Not Compatible with DUO/TERRA/ART)
- ??[Precautions If the vial thimble is very thick and short and cannot be inflated, Hose will expand, please replace the thin thimble bottle.The atmospheric cylinder should have sufficient pressure, If there is no siphon or liquid CO2 in the atmosphere bottle, Need to invert the CO2 atmospheric tank for inflation, Please read the instructions carefully.( Not Compatible with DUO/TERRA/ART)
- ??[No-Worries After-Sale] This refill adapter is made of high quality material,we provide one year quality guarantee,if have any problem when use our product, you can contact us 24 hours,we will provide you a satisfied solution.( Not Compatible with DUO/TERRA/ART)
- See more on Amazon...
Brand: LADYSON | Manufacturer: LADYSON
See On Amazon #5
100 Leland (LE10 CO2) CO2 Soda Chargers - 8 Gram C02 Seltzer Water Cartridges For Use With Hamilton Beach Fizzini, and all 1Liter / Quart Soda Siphons
Asin: B00U6DDE4U | Model: NA | PartNumber: NA
Compatible With Isoda, Soda Sparkle, Mastrad, Ukeg 64, And All Standard 1 Liter Soda Siphons..
Also Great For Antique Pellet Gun And Toy Car Propellant..
Not Compatible With The Hamilton Beach Fizzini..
Super-Charged Cartridges With 8 Grams Of Pure Co2, Ideal For Vintage Guns..
Features
- Pack of 100 durable non threaded weld sealed stainless steel construction.
- Super-charged cartridges with 8 grams of pure CO2, ideal for vintage guns.
- Compatible with ISODA, Soda Sparkle, Mastrad, Ukeg 64, and all standard 1 liter soda siphons.
- Not compatible with the Hamilton Beach Fizzini.
- Also great for antique pellet gun and toy car propellant.
- See more on Amazon...
Brand: Leland | Manufacturer: Leland
Dimensions: 7.50 x 7.40 x 2.70 inches | Weight: 6.70 pounds
See On Amazon #6
Upgraded Soda Machine Co2 Adapter Stainless Steel Hose with Larger Pressure Gauge, CGA320 Co2 Tank Direct Hose Adapter to Jet/One Touch/Fizzi/Aqua Fizz Soda Water Machine (60 inch)
Asin: B0BGS6PDCY | Model: Soda Adapter Gauge | PartNumber: Soda Adapter Gauge | Ean: 0752859110170 | UPC: 752859110170
Stainless Steel Material Support High Pressure- The Braided Stainless Steel Soda Adapter Support 4500 Psi High Pressure With Spring Protector,And The Surface Is Polished Plating, Very Strong And Beautiful..
Wide Applications- The Soda Machine Extended Hose Adapter Can Connect To Large Co2 Tanks, Such As 5Lb, 20Lb, Or 50Lb Commercial Co2 Tanks. It Is Suitable For Cga-320 Outlets In Countries Such As The Usa, Ca, Br,Co And The Ph..
Save Cost On Soda Clinder Refill- This Co2 Adapter System Allows You To Connect Your Soda Maker Machine To An External Non-Siphon Co2 Canister That Has A Cga320 Outlet Valve..
Food Grade Materials Support High Pressure- The Working Pressure Of The Hose Is 5000Psi. The Brass And Aluminum Construction Has Excellent Performance In Terms Of Corrosion Resistance, Both The Hose And O-Rings Are Made Of Food-Grade Materials, Ensuring Safety And Reliability. They Will Not Affect The Taste Of The Carbonated Water And Provide Excellent Air Tightness..
Features
- Compatibility-The standard CGA320 external hose can be used in large CO2 storage tanks and fits TR21-4 thread soda maker machine at home .Compatible with Fizzi, One Touch, JET, Aqua Fizz blue bottle, Genesis, Source, DrinkMate, Aarke, Philips which use blue cylinder. (NOTE: 1. Not suitable for Art Terra or DUO pink system 2. Only treats gaseous CO2 and does not process liquid CO2. Liquid CO2 will make your drink taste bad.)
- Food Grade Materials Support High pressure- The working pressure of the hose is 5000psi. The brass and aluminum construction has excellent performance in terms of corrosion resistance, Both the hose and o-rings are made of food-grade materials, ensuring safety and reliability. They will not affect the taste of the carbonated water and provide excellent air tightness.
- Stainless Steel Material Support High Pressure- The braided stainless steel soda adapter support 4500 psi high pressure with spring protector,and the surface is polished plating, very strong and beautiful.
- Save Cost on Soda Clinder Refill- This co2 adapter system allows you to connect your soda maker machine to an external Non-Siphon CO2 canister that has a CGA320 outlet valve.
- Wide Applications- The soda machine extended hose adapter can connect to large CO2 tanks, such as 5lb, 20lb, or 50lb commercial CO2 tanks. It is suitable for CGA-320 outlets in countries such as the USA, CA, BR,CO and the Ph.
- See more on Amazon...
Brand: Vavoger | Manufacturer: Vavoger
See On Amazon #7
None branded 12g CO2 Cartridge Adapter Instead of 88g or 90g CO2 Capsule Bottle for SIG SAUER MPX MCX Air Gun Rifle
Asin: B08F3GRSJ4 | Ean: 0791564667548 | UPC: 791564667548
Comparing Volumes, Gas In 12G Caps Is Much Cheaper Than The 88G Ones..
It Suitable For Umarex Air Javelin And Sig Sauer Mpx,Sig Sauer Mcx.
Save Money-It's Use To Instead Of 88G Or 90G Co2 Cylinder. The 12G Cylinder Can Put Out About 20-30 Charges And About 15-20 Shots..
It Comes With A Standard Thread Adaptor That Is Compatible With Co2 Rifle That Normally Uses 88G Capsules..
Features
- This Quick Change 12g CO2 Cylinder Adapter uses a single 12g disposable cylinder.
- It comes with a standard thread adaptor that is compatible with co2 rifle that normally uses 88g capsules.
- Comparing volumes, gas in 12g caps is much cheaper than the 88g ones.
- Save money-It's use to instead of 88g or 90g co2 cylinder. The 12g cylinder can put out about 20-30 charges and about 15-20 shots.
- It suitable for Umarex Air Javelin and SIG SAUER MPX,SIG SAUER MCX
- See more on Amazon...
Brand: None branded | Manufacturer: None branded
See On Amazon #8
50 Leland (LE10 CO2) CO2 soda chargers - 8g C02 seltzer water cartridges - 5 boxes of 10
Asin: B007JAXC4U | Model: LE10 CO2 | PartNumber: LE10 CO2 | Ean: 0723965304005 | UPC: 723965304005
Compatible With Isoda, Soda Sparkle, Mastrad, Ukeg 64, And All Standard 1 Liter Soda Siphons.
Also Great For Antique Pellet Gun And Toy Car Propellant..
Not Compatible With The Hamilton Beach Fizzini..
Super-Charged Cartridges With 8 Grams Of Pure Co2, Ideal For Vintage Guns.
Features
- 50 Pack, durable non threaded weld sealed stainless steel construction
- Super-charged cartridges with 8 grams of pure CO2, ideal for vintage guns
- Compatible with ISODA, Soda Sparkle, Mastrad, Ukeg 64, and all standard 1 liter soda siphons
- Not compatible with the Hamilton Beach Fizzini.
- Also great for antique pellet gun and toy car propellant.
- See more on Amazon...
Brand: Leland
See On Amazon #9
Beer Keg Charger CO2 Dispenser - Includes Keg Regulator 0-30 PSI, 3/8" Thread Adapter, Gas Ball Lock Quick Disconnect for Homebrewing
Asin: B07NRD1BPJ | Ean: 0653846707383 | UPC: 653846707383
Widely Use: Cornelius Keg Dispense Kit, Dispensing Beer, Coffee, Soda, Kombucha And Other Beverage;.
Quality Guarantee: Any Defective For Keg Charger, Backed By 45 Days Money-Back..
Portable Size For Keg Co2 Regulator Allow You To Bring To Any Party, Barbeque, Also Storage More Convenient;.
Features
- Mini Keg Charger 0-30 PSI with Ball Lock Gas Quick Disconnect Thread;
- Portable Size for Keg CO2 Regulator Allow you to Bring to any Party, Barbeque, also Storage more Convenient;
- Widely Use: Cornelius Keg Dispense Kit, Dispensing Beer, Coffee, Soda, Kombucha and other Beverage;
- Quality Guarantee: Any Defective for Keg Charger, Backed by 45 days Money-Back.
- See more on Amazon...
Brand: LUCKEG
See On Amazon #10
CGA320 CO2 Cylinder Refill Adapter Hose, CO2 Refill Station Connector Kit for Filling Blue Soda-maker Tank(CGA320 to TR21-4, Dual Valve With Gauge) (36Inch)
Asin: B08H5G92ZR | Model: CO2 Cylinder Refill Adapter Hose | PartNumber: CO2 Cylinder Refill Adapter Hose | Ean: 0788482516997 | UPC: 788482516997
【Outlet Thread】The Outlet Thread For Connecting The Co2 Cylinder Is Tr21-4, Which Is Suitable For Most Soda Co2 Bottles (Fizzi/One Touch/Jet Blue Cyclinders), Not Suitable For Co2 Cylinders Other Than Tr21-4 Or Clip-On Design, Especially Not Suitable For Paintball Tanks, As Well As Terra/Art/Duo/Gaia Series Water Dispenser, They Look Similar, But The Threads Are Not The Same, They Are Not Universal, Please Confirm Before Purchasing!.
【Support After-Sales】We Are Very Confident In This Product, So We Provide One Year Product Support And Returns/Exchange Guarantee, For Whatever Reason, You Are Not Satisfied Or Have Questions About The Product, Please Feel Free To Contact Us, You Will Get A Satisfactory Answer..
【Precautions】It Is Recommended To Freeze The Small Cylinders For A Few Hours Before Filling, As It Will Be Easier To Fill Them With More Gas.If The Vial Thimble Is Too Thick And Short To Be Inflated, The Hose Will Expand, Please Replace The Thin Thimble Bottle. The Large Cylinder Should Have Sufficient Pressure. If There Is No Siphon Or Liquid Co2 In The Large Cylinder, The Co2 Tank Needs To Be Inflated Upside Down Or On Its Side, Please Read The Instructions Carefully..
【Inlet Thread】Filling Adapter Can Be Used To Refill Small Co2 Tanks From Larger Co2 Tanks, The Filling Adapter Is [Us Cga-320(G1/2)], Only Suitable For The United States, Canada, Not Suitable For Uk, Germany And Other Countries, If You Are Giving It As A Gift, Please Make Sure To Be Clear..
Features
- High Quality Material The 36 inch hose is braided by high quality stainless steel and is tightly connected with 100% solid brass fittings, with good air tightness, 3000PSI working pressure, strong, safe and reliable. The refill adapter is equipped with a pressure gauge and has two on-off valves (for filling and venting) for easy and safe use.
- Inlet Thread Filling adapter can be used to refill small CO2 tanks from larger CO2 tanks, the filling adapter is [US CGA-320(G1/2)], only suitable for the United States, Canada, not suitable for UK, Germany and other countries, if you are giving it as a gift, please make sure to be clear.
- Outlet Thread The outlet thread for connecting the CO2 cylinder is TR21-4, which is suitable for most soda CO2 bottles (FIZZI/ONE TOUCH/JET blue cyclinders), not suitable for CO2 cylinders other than TR21-4 or clip-on design, especially not suitable for paintball tanks, as well as TERRA/ART/DUO/GAIA series water dispenser, they look similar, but the threads are not the same, they are not universal, please confirm before purchasing!
- Precautions It is recommended to freeze the small cylinders for a few hours before filling, as it will be easier to fill them with more gas.If the vial thimble is too thick and short to be inflated, the hose will expand, please replace the thin thimble bottle. The large cylinder should have sufficient pressure. If there is no siphon or liquid CO2 in the large cylinder, the CO2 tank needs to be inflated upside down or on its side, please read the instructions carefully.
- Support after-sales We are very confident in this product, so we provide one year product support and returns/exchange guarantee, for whatever reason, you are not satisfied or have questions about the product, please feel free to contact us, you will get a satisfactory answer.
- See more on Amazon...
Brand: MONKEMON
Dimensions: 50.00 x 100.00 x 100.00 Centimeters | Weight: 1.40 Pounds
Warranty: 【Quality after-sales】We are very confident in this product, So we provide one year quality guarantee, For whatever reason, You are not satisfied, Please feel free to contact us, You will get a satisfactory answer
See On Amazon #11
NTSUMI CO2 Tank Filling Station Charging Adapter with 60Inch Hose Fit for Filling Soda Machine CGA320 to CGA320 Threaded CO2 Tank
Asin: B0B63KWLKH | Model: Charging Adapter | PartNumber: Charging Adapter
Installation Method: Please Wear Appropriate Protective Equipment During Installation To Prevent Cold Burns Or Damage. This Adapter Comes With A Product Manual. Please Refer To The Manual For The Specific Installation Method.
Products Include: 1 X Hose Adapter 2 X Gasket 1 X Product Manual. The Product Has Been 100% Tested Before Leaving The Factory, And The Performance Is Stable, Please Confirm The Model Before Purchasing To Save Your Money And Time. If You Have Any Questions, Please Contact Us.
Please Note: This Adapter Is Not Suitable For Some Co2 Bottles With Rpv Valve (Residual Pressure Valve), But Some Rpv Valves Can Be Removed With A Hexagon Wrench And The Adapter Installed, Please Check Your Co2 Before Placing An Order Is The Tank Compatible.
Cost-Effective: The Co2 Tank Adapter Is Made Of High Quality Brass And Rubber, Durable, Heavy Duty Tank Connector, 60 Inch High Pressure Hose (With Bleed Valve), Working Pressure: 4500Psi, A Perfect Replacement, Long Service Life.
Features
- Compatible Models: Fit for 20 lb CGA320 Threaded CO2 Tank Fill to 5 lb CGA320 Threaded CO2 Tank
- Cost-effective: The co2 tank adapter is made of high quality brass and rubber, durable, heavy duty tank connector, 60 inch high pressure hose (with bleed valve), working pressure: 4500PSI, a perfect replacement, long service life
- Installation Method: Please wear appropriate protective equipment during installation to prevent cold burns or damage. This adapter comes with a product manual. Please refer to the manual for the specific installation method
- Please Note: This adapter is not suitable for some CO2 bottles with RPV valve (residual pressure valve), but some RPV valves can be removed with a hexagon wrench and the adapter installed, please check your CO2 before placing an order Is the tank compatible
- Products Include: 1 x hose adapter 2 x gasket 1 x product manual. The product has been 100% tested before leaving the factory, and the performance is stable, please confirm the model before purchasing to save your money and time. If you have any questions, please contact us
- See more on Amazon...
Brand: NTSUMI | Manufacturer: NTSUMI
See On Amazon #12
GURUDAR CO2 Cylinder CO2 Tank Direct Adapter with 60in Stainless Steel Hose, CGA320 CO2 Cartridges to Sparkling Water Soda Maker Direct Connector for Terra DUO Art Gaia Aqua Fizz
Asin: B0BR67CKVD | Ean: 0768599170060 | UPC: 768599170060
【Upgrade Design In Every Dtail】: Brass Construction Has Excellent Performance In Terms Of Corrosion Resistance, High Temperature Ductility And Low Magnetic Permeability, Which Can Withstand Up To 100 °C (212 °F). The Rubber Ring Is Made Of Food Grade Material, Which Is Safe And Reliable. It Will Not Transmit Chemical Taste To Carbonated Water, And It Can Provide Better Air Tightness.
【Satisfaction Customer Service】: Our Co2 Cartridges Adapter Use High-Quality Materials And We Offer A Friendly After-Sale Service. If You Are Not Clear About The Machine Adaptation Or There Are Various Problems With The Connector After Long-Term Use, Please Feel Free To Contact Us, And Our Experts Will Provide You With Appropriate Solutions Online.
【Save Money On Co2 Refill】 : This Co2 Tank Adapter Hose Kit Is Super Easy To Install And Remove. It Can Directly Connect A Large Co2 Tank And Sparkling Water Soda Maker Machine For Instant Savings In Refill Costs And Allows Normal Operation Without Any Permanent Changes. Suitable For Non-Siphon Co2 Tank With Cga-320 Outlet Valve, Such As 5Lb, 20Lb Or 50Lb Commercial Co2 Cylinders. It Is A Perfect Substitute For Small Co2 Exchange Carbonator/Co2 Cylinder..
【Premium Material & Craftsmanship】 : The External Hose Is Braided From High-Quality Stainless Steel, It Has The Advantages Of Anti-Rust, Anti-Corrosion, Wear Resistance, Anti-Aging, Not Easy To Deform, Etc. Through The Latest Upgrade Design, The Air Tightness Is Improved And The Problems Of Tube Explosion And Tube Expansion Are Avoided. Working Pressure Meets 4500 Psi..
Features
- UNIVERSALLY FIT : The system allows you to connect a large CO2 tank to sparkling water maker machine including Terra, Art, Gaia, Aqua Fizz with pink canisters(New), DUO. It can only work perfectly with the 'Pink CO2 cylinder connect system', and cannot work together with the 'Blue CO2 cylinder connect system' such as Fizzi One Touch, JET, Aqua Fizz(Old), Genesis, Source, Ninja Thirsti, DrinkMate, Aarke, Philips. Only treats gaseous CO2 and does not process liquid CO2. Liquid CO2 will make your drink taste bad.
- Premium Material & Craftsmanship : The external hose is braided from high-quality stainless steel, It has the advantages of anti-rust, anti-corrosion, wear resistance, anti-aging, not easy to deform, etc. Through the latest upgrade design, the air tightness is improved and the problems of tube explosion and tube expansion are avoided. Working pressure meets 4500 psi.
- Upgrade Design In Every Dtail : Brass construction has excellent performance in terms of corrosion resistance, high temperature ductility and low magnetic permeability, which can withstand up to 100 C (212 F). The rubber ring is made of food grade material, which is safe and reliable. It will not transmit chemical taste to carbonated water, and it can provide better air tightness
- Save Money On CO2 Refill : This CO2 tank adapter hose kit is super easy to install and remove. It can directly connect a large CO2 tank and sparkling water soda maker machine for instant savings in refill costs and allows normal operation without any permanent changes. Suitable for Non-Siphon CO2 Tank with CGA-320 outlet valve, such as 5lb, 20lb or 50lb commercial CO2 cylinders. It is a perfect substitute for small CO2 exchange carbonator/CO2 cylinder.
- Satisfaction Customer Service : Our CO2 cartridges adapter use high-quality materials and we offer a friendly after-sale service. If you are not clear about the machine adaptation or there are various problems with the connector after long-term use, please feel free to contact us, and our experts will provide you with appropriate solutions online
- See more on Amazon...
Brand: GURUDAR
See On Amazon #13
Genrics 12g Co2 Cartridges Adapter Instead of 88g or 90g Co2 Capsule, Co2 Quick Change Holder Compatible with Sig Sauer MCX or MPX
Asin: B08CZC6F98
Save Cost-Comparing Volumes, Gas In 12G Caps Is Much Cheaper Than The 88G Co2 Cartridges.The 12G Cylinder Can Put Out About 20-30 Charges And About 15-20 Shots..
Light Weight, Easy Install- The Weight Of Co2 Cartridges 12G Adapter Is 0.18Lb Only..
Wide Applications-It Comes With A Standard Thread Adaptor That Is Compatible With Co2 Rifle Which Normally Uses 88G Or 90G Co2 Cartridges..
Features
- Perfect Design-This paintball quick change 12g co2 cartridges adapter uses a single 12g disposable cylinder, it can instead of 80g or 90g co2 cartridges. cylinder.
- Wide Applications-It comes with a standard thread adaptor that is compatible with co2 rifle which normally uses 88g or 90g co2 cartridges.
- Save Cost-Comparing volumes, gas in 12g caps is much cheaper than the 88g co2 cartridges.The 12g cylinder can put out about 20-30 charges and about 15-20 shots.
- Light Weight, Easy Install- The weight of co2 cartridges 12g adapter is 0.18lb only.
- See more on Amazon...
Brand: Genrics
See On Amazon #14
JARDLI CO2 Paintball Tank CGA 320 Adapter for Aquarium CO2 Regulator
Asin: B07W18LJB9 | Ean: 0607467149435 | UPC: 607467149435
Made Of Hard Aluminum Alloy, Never Deformation. Surface Oxidation Treated, Blue Color Not Easy To Scratch..
We Would Like To Suggest You Install Your System With A Wrench. You Need To Screw The Adapter To The Regulators First Then After That Screw The Adapter On The Co2 Bottle..
It Is Compatible With The American Standard Co2 Paintball Tank. It Is Not Compatible With The Soda Stream Carbonator And The Fluval 88G Kit..
Built-In Pressure Relief Hole For Safety When Removing The Adapter From The Co2 Cylinder..
Features
- With this adapter, you can attach a CO2 regulator with CGA320 thread to a paintball CO2 pin valve cylinder. Male CGA 320 thread fits the regulator.
- Built-in pressure relief hole for safety when removing the adapter from the CO2 cylinder.
- Made of hard aluminum alloy, never deformation. Surface oxidation treated, blue color not easy to scratch.
- It is compatible with the American Standard CO2 paintball tank. It is not compatible with the soda stream carbonator and the Fluval 88g kit.
- We would like to suggest you install your system with a wrench. You need to screw the adapter to the regulators first then after that screw the adapter on the co2 bottle.
- See more on Amazon...
Brand: JARDLI | Manufacturer: JARDLI
See On Amazon #15
VaVoger Paintball 12g Co2 Capasule Quick Change 12 Gram Carbon Dioxide Cartridges Cylinder Adapter Bottle Co2 Cartridge Adapter
Asin: B09NVZ1CZ7 | Ean: 0787803112900 | UPC: 787803112900
Light Weight, Easy Install- The Weight Of Co2 Cartridges 12Gram Adapter Is 0.18Lb Only,Which Is More Convenient To Carry..
Instructions-Slip A 12 Gram Co2 Cartridge In The Rear Tube And Tighten. The Cartridge Is Pierced And The Co2 Flows Into The Marker.
Save Cost-Comparing Volumes, Gas In 12G Caps Is Much Cheaper Than The 88G Co2 Cartridges.The 12G Cylinder Can Put Out About 20-30 Charges And About 15-20 Shots..
Wide Applications-It Comes With A Standard Thread Adaptor That Is Compatible With Co2 Rifle Which Normally Uses 88G Or 90Gram Co2 Cartridges, And It Allows The Use Of 12 Gram Co2 Capsule In Any Marker With A Standard Asa Tank Thread..
Features
- Patent Design-Adapter for paintball 12g CO2 (G 1/2 Male Thread) cartridges, You can use it to test your firing paintball guns
- Wide Applications-It comes with a standard thread adaptor that is compatible with co2 rifle which normally uses 88g or 90gram co2 cartridges, and it allows the use of 12 gram co2 capsule in any marker with a standard ASA tank thread.
- Light Weight, Easy Install- The weight of co2 cartridges 12gram adapter is 0.18lb only,which is more convenient to carry.
- Save Cost-Comparing volumes, gas in 12g caps is much cheaper than the 88g co2 cartridges.The 12g cylinder can put out about 20-30 charges and about 15-20 shots.
- Instructions-slip a 12 gram CO2 cartridge in the rear tube and tighten. The cartridge is pierced and the CO2 flows into the marker
- See more on Amazon...
Brand: VaVoger | Manufacturer: VaVoger
See On Amazon #16
New CO2 Tank Refill Station Charging Adaptor Transfer with Hose CGA320 to CGA320
Asin: B08DRJGGB5 | Model: VO1226 | PartNumber: VO1226 | Ean: 0791564528108 | UPC: 791564528108
Durable And Reliable: Made From High-Quality Materials, This Adapter Hose Is Built To Last And Withstand The Rigors Of Frequent Use, Providing You With Long-Lasting Performance And Reliability..
Please Note: This Adapter Doesn't Work With Some Co2 Bottle Which Has Rpv Valve (Residual Pressure Valve),But Some Of Rpv Valve Can Be Removed By Hex Wrench,Please Check Your Co2 Tank Before Place Order..
Easy To Use: With Its User-Friendly Design, This Co2 Tank Refill Adapter Hose Is Easy To Connect And Operate, Simplifying The Refilling Process And Saving You Time And Effort..
Versatile Compatibility: Designed To Fit Most Standard Cga320 Co2 Tanks, This Adapter Hose Enables You To Refill Various Small Tanks, Making It Suitable For A Range Of Applications..
Features
- Efficient Refilling: The Co2 refill adapter hose allows you to effortlessly refill small Co2 tanks from larger Co2 tanks, ensuring a continuous and convenient supply of Co2 for your needs.For example, 20lb CGA320 thread co2 tank fill to 5lb CGA320 Thread co2 tank.
- Versatile Compatibility: Designed to fit most standard CGA320 Co2 tanks, this adapter hose enables you to refill various small tanks, making it suitable for a range of applications.
- Durable and Reliable: Made from high-quality materials, this adapter hose is built to last and withstand the rigors of frequent use, providing you with long-lasting performance and reliability.
- Easy to Use: With its user-friendly design, this co2 tank refill adapter hose is easy to connect and operate, simplifying the refilling process and saving you time and effort.
- Please Note: This adapter doesn't work with some co2 bottle which has RPV valve (residual pressure valve),but some of RPV valve can be removed by hex wrench,please check your co2 tank before place order.
- See more on Amazon...
Brand: Bhuuno | Manufacturer: VaVoger
Dimensions: 50.00 x 100.00 x 100.00 Centimeters | Weight: 0.75 Pounds
See On Amazon #17
CGA320 Soda Machine Co2 Adapter Quick Connector Hose,for Co2 Storage Tanks Compatible With Soda Machine Terra/Art/Duo/Gaia/E-Terra/E-Duo(60inch)
Asin: B0CPB12XB2
Cost Saving : This Co2 Tank Adapter Hose Kit Is Very Easy To Install And Remove. It Connects Directly To A Large Co2 Tank And Soda Maker, Saving Money On Soda Bottle Can Refills , It Has A Cga320 Outlet Valve, This System Allows You To Connect Your Soda Maker To An External Non-Siphon Co2 Tank..
Service：We Attach Greatimportance To The Customer's Experience Of Using The Product,If You Encounter Any Problems During The Use, Please Feel Freeto Contact Us, We Will Help You Solve The Problem At The Firsttime And Give You A Satisfactory Answer..
Simple Installation: It's Lightweight And Easy To Install, The Soda Adapter Hose Is 60 Inch Long And Weighs About 0.7 Pounds. In Just A Few Simple Steps, Your Co2 Soda Machine (Compatible With The Duo Art Terra Soda Machine) Is Ready To Use This Quick Adapter. Suitable For Cga-320 Of These Countries-United States, Canada, Brazil, Colombia, Philippines..
Good Materials : The Materials Is Food-Grade Materials, Which Is No Odour. The Working Pressure Of The Hose Is 5000Psi, It Has The Advantages Of Anti-Rust, Anti-Corrosion, Wear Resistance, Anti-Aging, Not Easy To Deform Etc. Through The Latest Upgrade Design, The Air Tightness Is Improved And The Problems Of Tube Explosion And Tube Expansion Are Avoided..
Features
- Application Models: The Connection Adapter allows you to connect a large CO2 tank to sparkling water maker machine including TERRA/DUO/ART/GAIA/E-TERRA/E-DUO. It can only work perfectly with the 'Pink CO2 cylinder connect system Cannot be used with "Blue CO2 Cylinder Connection Systems" (e.g. Fizzi One Touch, JET, Aqua Fizz, Genesis, Source, DrinkMate, Aarke, Philips),Handles gaseous carbon dioxide only, not liquid carbon dioxide.
- Good materials : The materials is food-grade materials, which is no odour. The working pressure of the hose is 5000psi, it has the advantages of anti-rust, anti-corrosion, wear resistance, anti-aging, not easy to deform etc. Through the latest upgrade design, the air tightness is improved and the problems of tube explosion and tube expansion are avoided.
- Cost saving : This CO2 tank adapter hose kit is very easy to install and remove. It connects directly to a large CO2 tank and soda maker, saving money on soda bottle can refills , It has a CGA320 outlet valve, this system allows you to connect your soda maker to an external non-siphon CO2 tank.
- Simple Installation: It's lightweight and easy to install, the soda adapter hose is 60 inch long and weighs about 0.7 pounds. In just a few simple steps, your CO2 soda machine (compatible with the DUO Art Terra Soda Machine) is ready to use this quick adapter. Suitable for CGA-320 of these countries-United States, Canada, Brazil, Colombia, Philippines.
- service We attach greatimportance to the customer's experience of using the product,if you encounter any problems during the use, please feel freeto contact us, we will help you solve the problem at the firsttime and give you a satisfactory answer.
- See more on Amazon...
Brand: Edsumey | Manufacturer: KUMAS
See On Amazon #18
LYHgogo PCP 12g Co2 Carriers Holder Capsule Adapter - Instant of 88g or 90g Co2 Carriers Quick Change MPX/MCX Shooting Adapter
Asin: B0CPYNGWTW
The 12 Gram Co2 Cartridge Cylinder Adapter Made Of Aluminum Alloy 6061 Anodized Dust Black, Light Weight, Durable And Practical To Use..
It Allows The Use Of 12 Gram Co2 Cartridges In Any Marker With A Standard Asa Tank M16*1.5 Standard Thread..
Comparing Volumes, Gas In 12G Caps Is Much Cheaper Than The 88G Co2 Cartridges.The 12G Cylinder Can Put Out About 20-30 Charges And About 15-20 Shots..
Built-In Sealing Ring - The Front End Of The Nut Has An O-Ring, And The Needle End Of The Needle Piercing The Co2 Has A Soft Gasket Inside To Prevent Co2 Leaking..
Features
- This Paintball Quick Change 12g Co2 Cartridges Adapter Uses A Single 12g Disposable Cylinder.very Cost-effective Solution To 80g. Easy Install, Conserves Co2, Change From 80g To 12g.
- Built-in Sealing Ring - The Front End Of The Nut Has An O-ring, And The Needle End Of The Needle Piercing The Co2 Has A Soft Gasket Inside To Prevent Co2 Leaking.
- The 12 Gram Co2 Cartridge Cylinder Adapter Made Of Aluminum Alloy 6061 Anodized Dust Black, Light Weight, Durable And Practical To Use.
- Comparing Volumes, Gas In 12g Caps Is Much Cheaper Than The 88g Co2 Cartridges.the 12g Cylinder Can Put Out About 20-30 Charges And About 15-20 Shots.
- It Allows The Use Of 12 Gram Co2 Cartridges In Any Marker With A Standard Asa Tank M16*1.5 Standard Thread.
- See more on Amazon...
Brand: LYHgogo | Manufacturer: LYHgogo
See On Amazon #19
CO2 Refill Adapter, CO2 Carbonator Cylinder On/Off Refill Adapter Bottle Connector CO2 Accessories, for Soda Maker Home Machine
Asin: B07QJ2M1Y8 | Model: Garosacv9w1g2a67 | PartNumber: Garosacv9w1g2a67 | Ean: 0748018593298 | UPC: 748018593298
Easy To Use And Store..
Have One 1/8Npt Threaded Port. Fits For 21*4 Co2 Thread..
Easy To Screw Empty Co2 Cylinder Into The Adapter..
Made With High Quality Stainless Steel For Maximum Durability..
Features
- Precise design, anti- and wear resistance.
- Made with high quality stainless steel for maximum durability.
- Easy to use and store.
- Easy to screw empty CO2 cylinder into the adapter.
- Have one 1/8npt threaded port. Fits for 21*4 CO2 Thread.
- See more on Amazon...
Brand: Garosa | Manufacturer: Garosa
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #20
CO2 Tank Adapter Brass Cylinder Tank W21.8 CGA320 Adapter Converter for Aquarium Fish Tank Easy Installation(CGA320 convert to W21.8)
Asin: B0839J44M2 | Model: TOPINCN24n7or5zak-02 | PartNumber: TOPINCN24n7or5zak-02 | Ean: 0738589300401 | UPC: 738589300401
Stable, Quiet And No Noise. Can Be Used For Co2 Regulator At The Aquarium..
2 Sizes Available, You Can Choose The Right One You Need. Great Kits For Your Aquarium Tank..
Easy To Install, Just By Hand, No High Installation Skill Required..
It Allows You To Attach A Paintball Co2 Tank To Your Existing Keg System Co2 Regulator..
Features
- Made of high quality brass material, and long lasting.
- It allows you to attach a paintball CO2 tank to your existing keg system CO2 regulator.
- Stable, quiet and no noise. Can be used for CO2 regulator at the aquarium.
- Easy to install, just by hand, no high installation skill required.
- 2 sizes available, you can choose the right one you need. Great kits for your aquarium tank.
- See more on Amazon...
Brand: TOPINCN | Manufacturer: TOPINCN
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon
Looking For Something Else?
Search