Case Club 4 Rifle (or Shotgun) Waterproof Shipping Case fits Multiple Guns & 3 Pistols Along with Included Silica Gel Canister to Prevent Gun Rust
Asin: B09LKQHJ7D | Ean: 0850031432666 | UPC: 850031432666
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Case Will (Likely) Not Fit Large Side Attachments, Bipods, Side By Side Barrels, Or Large Bolts That Stick Out The Side.
Two Padlock Points That Support A Customer Supplied Padlock With A 1/4" Shackle.
100% Waterproof (Ip67) & Dustproof.
Customizable Lid Hold Down Blocks That Can Be Adjusted For Each Gun. Max Overall Gun Height Is 11.13".
Case Is 100% Shippable And Airline Approved For Tsa Checked Luggage.
Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil.
Case Will Weight About 75 Lbs Loaded With Guns. Case Has Wheels..
Accommodates Optics Including Scopes & Red-Dots, Foregrips Including Vertical Foregrips And Angled Foregrips, Under Barrel Attachments Including Flashlights & Lasers, Pistol Optics & Under Barrel Attachments, And Grip Fins & Featureless Rifles.
Features
- Case fits x4 Rifles or Shotguns (under 41" in Overall Length), x3 Semi-Auto Pistols, x12 Rifle Magazines, x24+ Pistol Magazines, and x1 Moisture Absorbing Silica Gel Canister (Included)
- Accommodates optics including scopes & red-dots, foregrips including vertical foregrips and angled foregrips, under barrel attachments including flashlights & lasers, Pistol optics & under barrel attachments, and Grip fins & featureless rifles
- Case will (Likely) not fit Large side attachments, Bipods, Side by Side Barrels, or Large bolts that stick out the side
- Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
- Customizable lid hold down blocks that can be adjusted for each gun. Max overall gun height is 11.13
- Case is 100% shippable and airline approved for TSA checked luggage
- Two padlock points that support a customer supplied padlock with a 1/4 shackle
- 100% Waterproof (IP67) & Dustproof
- Case will weight about 75 lbs loaded with guns. Case has wheels.
- See more on Amazon...
Brand: Case Club
See On Amazon Similar To Case Club 4 Rifle or
#1
Case Club 5 Pistol and 20 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-3)
Asin: B00K7LGLRS | Model: 5 Pistol Case | PartNumber: 5 Pistol Case | Ean: 0856792005088 | UPC: 856792005088
Two Metal Reinforced Padlock Points That Support A Customer Supplied Padlock With A 1/4" Shackle Along With One Way Hinge Pins Ensure Your Gear Remains Safe And Secure..
Exterior Dimensions: 17.5" X 14.25" X 7.5".
Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Gen-3 Updates Include: Improved (User Friendly) Clamp Latches, Improved Heavy Duty Carry Handle With Molded Rubber Grip And Finger Grooves, Metal Reinforced Padlock Holes, Updated Pressure Release Valve And Sleeker Exterior Case Shell.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil..
Easily Convert The Case From A 5 Pistol Version To A 4 Pistol & Accessory Version By Removing The Pistol Module & Freeing Up Room For Ammunition & Safety Gear. Quickly Convert It Back To The 5 Pistol Version Anytime By Putting The Module Back In. Dual Purpose Foam Design Allows For Two Different Configurations For The Price Of One!.
Features
- Holds 5 pistols, 20 magazines (+5 more in the magwells) & comes with a rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage.
- Easily convert the case from a 5 pistol version to a 4 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 5 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations for the price of one!
- Two metal reinforced padlock points that support a customer supplied padlock with a 1/4 shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil.
- Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Gen-3 updates include: improved (user friendly) clamp latches, improved heavy duty carry handle with molded rubber grip and finger grooves, metal reinforced padlock holes, updated pressure release valve and sleeker exterior case shell
- Exterior Dimensions: 17.5 x 14.25 x 7.5
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 7.43 x 19.75 x 15.53 Inches | Weight: 9.11 pounds
See On Amazon #2
Case Club 6 Pistol and 21 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
Asin: B00K7LFJN0 | Model: 6 Pistol Case | PartNumber: 6 Pistol Case | Ean: 0856792005095 | UPC: 856792005095
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used Even With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 6 Pistol Version To A 5 Pistol & Accessory Version By Removing The Pistol Module & Freeing Up Room For Ammunition & Safety Gear. Quickly Convert It Back To The 6 Pistol Version Anytime By Putting The Module Back In. Dual Purpose Foam Design Allows For Two Different Configurations!.
Case Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 6 pistols, 21 magazines (+6 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 6 pistol version to a 5 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 6 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used even with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #3
Case Club 3 Pistol & Accessory & Up to 23 Magazines Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust (Gen 2)
Asin: B00K7K66CY | Model: 3 Pistol & Accessory Case | PartNumber: 3 Pistol & Accessory Case | Ean: 0856792005057 | UPC: 856792005057
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 3 Pistol & Accessory Version To A 3 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Modules. Adding 1 Module Increases Magazine Capacity To 17 While Adding Both Modules Increases It To 23. Quickly Convert It Back To The 3 Pistol & Accessory Version Anytime By Removing The Modules. Dual Purpose Foam Design Allows For Three Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 3 pistols and (up to) 23 magazines with magazine modules or 9 magazines with accessory pocket (+3 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 3 pistol & accessory version to a 3 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 17 while adding both modules increases it to 23. Quickly convert it back to the 3 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club
See On Amazon #4
Case Club fits FN PS90 in Pre-Cut Waterproof Compact Breakdown Rifle Case (Upgraded Gen-2)
Asin: B01GFA3K2S | Ean: 0856792005637 | UPC: 856792005637
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Case Shell Was Originally Made For Laptops Making This Perfect For Discreet Travel..
Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Pistol Cutout Accommodates Full Size, Compact & Subcompact Pistols Without Under-Barrel Attachments Or Optic. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Accommodates Up To 16" Barrels And Most Optics. Does Not Accommodate Side Attachments. See Image Diagram And Drawing For Fitment Information..
Features
- Holds a broken down FN PS90 or P90 rifle with or without optics, 5 rifle magazines (in the lid) along with a semi-automatic pistol with 2 pistol magazines. Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Accommodates up to 16 barrels and most optics. Does NOT accommodate side attachments. See image diagram and drawing for fitment information.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Case shell was originally made for laptops making this perfect for discreet travel.
- Pistol cutout accommodates full size, compact & subcompact pistols without under-barrel attachments or optic. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #5
Case Club 8 Pistol and 12 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust
Asin: B08YJ5WS1Q | Model: 8 Pistol Case | PartNumber: 8 Pistol Case | Ean: 0850021069810 | UPC: 850021069810
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Case Is Ideal For Police Departments, Military, Firearm Instructors & Those Who Have Large Pistol Collections..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 8 semi-auto pistols, 12 magazines (+8 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- Case is ideal for police departments, military, firearm instructors & those who have large pistol collections.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #6
Case Club 2 Pistol Holder .50 Cal Ammo Can Foam (Pre-Cut, Closed Cell, Military Grade Foam)
Asin: B00K8GWRYI | Ean: 0856792005149 | UPC: 856792005149
Foam Insert Is (Closed Cell) Military Grade Polyethylene Which Can Be Wiped Clean.
Set Includes 3 Pieces. Soft Lid Foam, Denser Base Foam With Cutouts, Dense Flatpad For The Bottom.
Max Length Of Pistols Is 8 5/8" & Not Intended For Revolvers, Foam Dimensions: 11"X5.625".
Holds Two Semi-Auto Pistols And Four Magazines.
Features
- Foam only, ammo can is NOT included with order
- Holds two semi-auto pistols and four magazines
- Foam insert is (closed cell) military grade polyethylene which can be wiped clean
- Max length of pistols is 8 5/8 & not intended for revolvers, Foam Dimensions: 11x5.625
- Set includes 3 pieces. Soft lid foam, denser base foam with cutouts, dense flatpad for the bottom
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Weight: 0.42 Pounds
See On Amazon #7
Case Club Case fits Kel-Tec KSG and Standard Manufacturing DP-12 in Pre-Cut Waterproof Shotgun Case with Accessory Box and Silica Gel to Help Prevent Gun Rust (Gen 2)
Asin: B016041XSM | Ean: 0856792005460 | UPC: 856792005460
Foam Insert Is (Closed Cell) High Grade Polyethylene Which Can Be Wiped Clean.
Moisture Removing Silica Gel Canister & Waterproof Accessory Box Are Included.
Case Is Airline Approved For Checked Luggage, Padlockable, Fully Shippable & Dustproof.
Also Holds Extra Magazines, A Pistol, Optics, Shotgun Attachments, & Various Accessories.
Features
- Pre-customized foam fits Kel-Tec KSG (Original, Compact, or Tactical) or Standard Manufacturing Company DP-12 Shotgun. Does not fit KSG25.
- Also holds extra magazines, a pistol, optics, shotgun attachments, & various accessories
- Foam insert is (closed cell) high grade polyethylene which can be wiped clean
- Case is Airline Approved for checked luggage, padlockable, fully shippable & dustproof
- Moisture removing silica gel canister & waterproof accessory box are included
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 5.50 x 40.00 x 16.00 Inches
See On Amazon #8
Case Club Case Fits Ruger Precision Rifle. Pre-Cut, Waterproof, with Accessory Box and Silica Gel to Help Prevent Gun Rust
Asin: B088HK5SJQ | Model: CC6063HXYWRUGPREC | PartNumber: CC6063HXYWRUGPREC
Please Refer To Diagram Image To Make Sure Your Rifle Will Fit. Fits Scope (Within A 3.70" Height). Fits Palm Shelf. Fits Bipod. Fits Under Barrel Attachments. Fits Bolt In Or Out Of The Gun..
Case Is Airline Approved For Checked Luggage, Padlockable, Wheeled, Fully Shippable & Dustproof. Case Is Ata Approved And Can Be Shipped..
Foam Insert Is (Closed Cell) Military Grade Polyethylene Which Can Be Wiped Clean..
Stainless Steel Added To Padlock Points For Added Security. Orange Peel Texture Added To Exterior Finish To Minimize Scratches. Structural Ribs Added To Outside Of Case For Increased Durability. Long Front Handle Length To Help Counter Balance Off Center Weighted Loads. Wide Bodied Snap Latches That Can Be Used With Gloves..
Features
- Waterproof wheeled case comes with pre-cut foam to hold your Ruger Precision with folding stock along with one pistol, 4 extra pistol magazines, 3-5 extra rifle magazines, included silica gel canister, included waterproof box, bolt if desired & various accessories.
- Stainless steel added to padlock points for added security. Orange peel texture added to exterior finish to minimize scratches. Structural ribs added to outside of case for increased durability. Long front handle length to help counter balance off center weighted loads. Wide bodied snap latches that can be used with gloves.
- Please refer to diagram image to make sure your rifle will fit. Fits scope (within a 3.70 height). Fits Palm Shelf. Fits bipod. Fits under barrel attachments. Fits bolt in or out of the gun.
- Foam insert is (closed cell) military grade polyethylene which can be wiped clean.
- Case is Airline Approved for checked luggage, padlockable, wheeled, fully shippable & dustproof. Case is ATA approved and can be shipped.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 6.25 x 44.25 x 16.00 inches
See On Amazon #9
Case Club Tactical Pre-Cut 4-Pistol Backpack with Rainfly & Molle Straps (Gen 2)
Asin: B01LQQZ2RC | Model: ASSYCCBPACKPIS4G2 | PartNumber: ASSYCCBPACKPIS4G2 | Ean: 0856792005699 | UPC: 856792005699
Twin Side Pockets Store 6 Extra Magazines Each Along With All Your Gear.
Built In Molle Straps Allow You To Attach Extra Gear To The Outside.
Pull-Out Rain Cover Protects Gear In Case Of A Sudden Downpour.
The Foam Cradle Is Designed To Fully Protect And Hold 4 Handguns Up To 8 5/8" In Overall Length.
Features
- Hands free transportation to and from the range or on the trails
- The foam cradle is designed to fully protect and hold 4 handguns up to 8 5/8 in overall length
- Twin side pockets store 6 extra magazines each along with all your gear
- Pull-out rain cover protects gear in case of a sudden downpour
- Built in Molle straps allow you to attach extra gear to the outside
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon
Looking For Something Else?
Search