uxcell Round Threading Dies 9/32"-40 UNF, Alloy Tool Steel Machine Thread Repair Hand Tool
Asin: B09LXWB8VD | Model: a21061800ux0654 | PartNumber: a21061800ux0654
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 9/32"-40 UNF; outside diameter (OD): 25mm / 0.98"; Thickness: 9mm / 0.35". Chip Pocket Quantity: 4. Made of alloy tool steel, with high hardness, high torque, good toughness, wear-resistance, high hardening capacity and tempering resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon Similar To uxcell Round Threading Dies 9
#1
uxcell Thread Milling Taps, 1/2-13 UNC High Speed Steel (HSS) 4 Straight Flutes Machine Screw Thread Threading Tap, 5" Length (Extra Long)
Asin: B0B6RD2TJS | Model: a22051600ux0146 | PartNumber: a22051600ux0146
Applications: Suitable For Processing Through Holes Or Shallow Blind Holes . Used For Drilling And Tapping Aluminum, Stainless Steel, Copper, Hard Plastics, Etc.. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Or Electric Drills Use Is Not Recommended. Please Add Coolant When Tapping And Apply Anti-Rust Oil For Maintenance After Use To Prolong The Service Life..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
High Speed Steel: High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance, Heat Resistance. Features Just The Base Substrate Without Any Coatings, Good For General Purpose Thread Tapping..
Features
- Tap Size: Thread size: 1/2-13 UNC; total length: 130mm / 5" (approx.); accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping.
- Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell 5/16"-32 UNEF Tap and Die Set, HSS Machine Thread Tap with Round Threading Die, Right Hand
Asin: B08MZ5WZPJ | Model: a19123000ux0245 | PartNumber: a19123000ux0245
Features: High Speed Steel (Hss) Tool Provides High Hardness And Good Wear-Resistance. With Fine Grinding Process, Tap And Die Set Is Sharp And Durable, And With Clear Thread To Meet The Processing Requirements..
Tips: Used With Tapping Oil To Get Threads And More Durable Taps. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping..
Easy To Use: The Fastening Screw In The Middle Of The Die Wrench Should Be Inserted Into The Slot Of The Die And Tightened. The Machine Tap Is Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines..
Application: Used For Through Hole Processing, Such As Alloy Steel, Die Steel, Cast Iron, Ferrous And Non-Ferrous Materials Etc.. Great For Maintenance And Repair Work..
Features
- Specifications: 5/16"-32 UNEF tap and die set, right hand, 2B tolerance grade. Suitable for making or repairing male and female threads. Good for general purpose applications.
- Application: Used for through hole processing, such as alloy steel, die steel, cast iron, ferrous and non-ferrous materials etc.. Great for maintenance and repair work.
- Features: High speed steel (HSS) tool provides high hardness and good wear-resistance. With fine grinding process, tap and die set is sharp and durable, and with clear thread to meet the processing requirements.
- Easy to Use: The fastening screw in the middle of the die wrench should be inserted into the slot of the die and tightened. The machine tap is suitable for drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil to get threads and more durable taps. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 5/16"-24 UNF Tap and Die Set, HSS Machine Thread Tap with Round Threading Die, Right Hand
Asin: B08MZ6LGV8 | Model: a19123000ux0244 | PartNumber: a19123000ux0244
Features: High Speed Steel (Hss) Tool Provides High Hardness And Good Wear-Resistance. With Fine Grinding Process, Tap And Die Set Is Sharp And Durable, And With Clear Thread To Meet The Processing Requirements..
Tips: Used With Tapping Oil To Get Threads And More Durable Taps. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping..
Easy To Use: The Fastening Screw In The Middle Of The Die Wrench Should Be Inserted Into The Slot Of The Die And Tightened. The Machine Tap Is Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines..
Application: Used For Through Hole Processing, Such As Alloy Steel, Die Steel, Cast Iron, Ferrous And Non-Ferrous Materials Etc.. Great For Maintenance And Repair Work..
Features
- Specifications: 5/16"-24 UNF tap and die set, right hand, 2B tolerance grade. Suitable for making or repairing male and female threads. Good for general purpose applications.
- Application: Used for through hole processing, such as alloy steel, die steel, cast iron, ferrous and non-ferrous materials etc.. Great for maintenance and repair work.
- Features: High speed steel (HSS) tool provides high hardness and good wear-resistance. With fine grinding process, tap and die set is sharp and durable, and with clear thread to meet the processing requirements.
- Easy to Use: The fastening screw in the middle of the die wrench should be inserted into the slot of the die and tightened. The machine tap is suitable for drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil to get threads and more durable taps. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #4
uxcell 2pcs Tap and Die Set, 5/16-18 UNC Left Hand Thread Tap & Round Die, Tapping Threading Tool Tap & Die Kit for Nut Screw Bolt Thread
Asin: B0CS5XXQYX
Features: Tap & Die With Clear Threads Without Burrs, Left Hand Tapping Direction. Thread Die Designed With Conical Lock Hole, Strong Locking Force And No Loosening. Uncoated Tools Feature Just The Base Substrate, Great For A Wide Range Of Applications..
How To Use: Die Is Used With Die Stock Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened .Machine Tap Is Used In Drill Presses, Tapping, Cnc And Milling Machines. Apply Appropriate Cutting Lubricant Or Oil For Higher Quality Threads And More Durable Tools..
Reliable Material: 6542 High-Speed Steel Taps Offer High Hardness, Good Toughness, Wear Resistance, And Excellent Cutting Performance. 9Sicr Alloy Tool Steel Die Provides Excellent Hardness, Toughness And Wear Resistance For Durability..
Widely Used: Accurately Cut, Correct Or Clean Threads. Straight Flute Tap Process Through Or Shallow Blind Holes And Remove Chips Downward. Die Is Suitable For Threads On Rods, Bolts, Screws, Pipes And Shafts, Or Just Remove Bolts And Threaded Rods. Great For Most Metals, Iron, Copper, Zinc, Alloy Steel, Abrasive Steel, Stainless Steel, Etc...
Features
- Tap and Die Set: Thread Size: 5/16-18 UNC (Left Hand); Tap Square Shank Width: 5mm / 0.2"; Tap Thread Length: 22mm / 0.87"; Tap Total Length: 69mm / 2.72"; Die Outside Diameter: 25mm / 0.98", Die Thickness: 9mm / 0.35"
- Widely Used: Accurately cut, correct or clean threads. Straight flute tap process through or shallow blind holes and remove chips downward. Die is suitable for threads on rods, bolts, screws, pipes and shafts, or just remove bolts and threaded rods. Great for most metals, iron, copper, zinc, alloy steel, abrasive steel, stainless steel, etc..
- Features: Tap & die with clear threads without burrs, left hand tapping direction. Thread die designed with conical lock hole, strong locking force and no loosening. Uncoated tools feature just the base substrate, great for a wide range of applications.
- Reliable Material: 6542 high-speed steel taps offer high hardness, good toughness, wear resistance, and excellent cutting performance. 9SiCr alloy tool steel die provides excellent hardness, toughness and wear resistance for durability.
- How to Use: Die is used with die stock wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened .Machine tap is used in drill presses, tapping, CNC and milling machines. Apply appropriate cutting lubricant or oil for higher quality threads and more durable tools.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell Machine Tap #6-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs
Asin: B07VCSVLJD | Model: a19050800ux0926 | PartNumber: a19050800ux0926
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: #6-32 UNC; Class: 2B; Thread Length: 20mm / 0.8 inch; Shank Side Width: 3mm / 0.12 inch; Total Length: 54mm / 2.13 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell M9 x 1mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983B81MK | Model: a21020200ux0303 | PartNumber: a21020200ux0303
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M9 x 1 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction. Tap Size: thread length: 22mm / 0.87"; overall length: 72mm / 2.83"; square shank: 5.5mm / 0.22"; Die Size: outside diameter (OD): 25mm / 0.98"; thickness: 9mm / 0.35"
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell Die Stock Handle Wrench, for Metric M12-M14 (Metric) / 1/2"-9/16" (UNC/UNF) / 38mm OD Round Dies, 38mm x 14mm Threading Die Holder with Plastic Handle
Asin: B0CPJF9RYX
Features: Round Die Wrench Is Designed With 5 Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. When Exposed To Liquid Or Moisture, The Ergonomic Plastic Dipped Handle Provides A Secure, Comfortable Grip During Use..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Apply Even And Consistent Pressure While Turning The Die Stock Handle. Tighten The Adjustable Screws Of The Die Stock Firmly Around The Die To Ensure A Secure Grip..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screws Of The Wrench, And The Screws Should Be Inserted Into The Die Groove And Tightened. Apply Cutting Oil Or Lubricant To The Workpiece And Die Before Starting Threading To Get Smoother, Cleaner Threads..
Wide Applications: The Die Handle Wrench Can Accurately Cut, Repair Or Clean External Threads On Rods, Bolts, Screws, Pipes, Shafts, And Other Cylindrical Objects, Or Simply Remove Bolts And Threaded Rods (When Used With Round Dies)..
Features
- Die Stock Wrench: Fit Die Size: M12-M14 (Metric) / 1/2"-9/16" (UNC/UNF) / 38mm OD Die; Die Stock Size: 38mm x 14mm / 1.5" x 0.55". The die stock is made of alloy steel for strength and durability. Black oxide coating provides extra protection against rust and corrosion.
- Wide Applications: The die handle wrench can accurately cut, repair or clean external threads on rods, bolts, screws, pipes, shafts, and other cylindrical objects, or simply remove bolts and threaded rods (when used with round dies).
- Features: Round die wrench is designed with 5 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. When exposed to liquid or moisture, the ergonomic plastic dipped handle provides a secure, comfortable grip during use.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screws of the wrench, and the screws should be inserted into the die groove and tightened. Apply cutting oil or lubricant to the workpiece and die before starting threading to get smoother, cleaner threads.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Apply even and consistent pressure while turning the die stock handle. Tighten the adjustable screws of the die stock firmly around the die to ensure a secure grip.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell M14 x 2mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B09839PVJR | Model: a21020200ux0322 | PartNumber: a21020200ux0322
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M14 x 2 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #9
uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die
Asin: B07SQ69G9N | Model: B07SQ69G9N | PartNumber: B07SQ69G9N
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 5/8-11 UNC; outside diameter (OD): 38mm / 1.5"; Thickness: 14mm / 0.55"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell M14 x 1.5mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983CBYZ5 | Model: a21020200ux0323 | PartNumber: a21020200ux0323
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M14 x 1.5 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction. Tap Size: thread length: 29mm / 1.14"; overall length: 95mm / 3.74"; square shank: 9mm / 0.35"; Die Size: outside diameter (OD): 38mm / 1.5"; thickness: 14mm / 0.55"
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell 2pcs Tap and Die Set, 5/16-24 UNF Left Hand Thread Tap & Round Die, Tapping Threading Tool Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0CS65H5V9
Features: Tap & Die With Clear Threads Without Burrs, Left Hand Tapping Direction. Thread Die Designed With Conical Lock Hole, Strong Locking Force And No Loosening. Uncoated Tools Feature Just The Base Substrate, Great For A Wide Range Of Applications..
How To Use: Die Is Used With Die Stock Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened .Machine Tap Is Used In Drill Presses, Tapping, Cnc And Milling Machines. Apply Appropriate Cutting Lubricant Or Oil For Higher Quality Threads And More Durable Tools..
Reliable Material: 6542 High-Speed Steel Taps Offer High Hardness, Good Toughness, Wear Resistance, And Excellent Cutting Performance. 9Sicr Alloy Tool Steel Die Provides Excellent Hardness, Toughness And Wear Resistance For Durability..
Widely Used: Accurately Cut, Repair Or Clean Threads. Straight Flute Tap Process Through Or Shallow Blind Holes And Remove Chips Downward. Die Is Suitable For Threads On Rods, Bolts, Screws, Pipes And Shafts, Or Just Remove Bolts And Threaded Rods. Great For Most Metals, Iron, Copper, Zinc, Alloy Steel, Abrasive Steel, Stainless Steel, Etc...
Features
- Tap and Die Set: Thread Size: 5/16-24 UNF (Left Hand); Tap Square Shank Width: 5mm / 0.2"; Tap Thread Length: 22mm / 0.87"; Tap Total Length: 71mm / 2.8"; Die Outside Diameter: 25mm / 0.98", Die Thickness: 9mm / 0.35"
- Widely Used: Accurately cut, repair or clean threads. Straight flute tap process through or shallow blind holes and remove chips downward. Die is suitable for threads on rods, bolts, screws, pipes and shafts, or just remove bolts and threaded rods. Great for most metals, iron, copper, zinc, alloy steel, abrasive steel, stainless steel, etc..
- Features: Tap & die with clear threads without burrs, left hand tapping direction. Thread die designed with conical lock hole, strong locking force and no loosening. Uncoated tools feature just the base substrate, great for a wide range of applications.
- Reliable Material: 6542 high-speed steel taps offer high hardness, good toughness, wear resistance, and excellent cutting performance. 9SiCr alloy tool steel die provides excellent hardness, toughness and wear resistance for durability.
- How to Use: Die is used with die stock wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened .Machine tap is used in drill presses, tapping, CNC and milling machines. Apply appropriate cutting lubricant or oil for higher quality threads and more durable tools.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell 3pcs Tap and Die Set, 4-40 UNC Thread Tap & Round Die, Tapping Threading Tool Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0CS5NTZVR
Features: Tap & Die With Clear Threads Without Burrs, Right Hand Tapping Direction. Thread Die Designed With Conical Lock Hole, Strong Locking Force And No Loosening. Uncoated Tools Feature Just The Base Substrate, Great For A Wide Range Of Applications..
How To Use: Die Is Used With Die Stock Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened .Machine Tap Is Used In Drill Presses, Tapping, Cnc And Milling Machines. Apply Appropriate Cutting Lubricant Or Oil For Higher Quality Threads And More Durable Tools..
Reliable Material: 6542 High-Speed Steel Taps Offer High Hardness, Good Toughness, Wear Resistance, And Excellent Cutting Performance. 9Sicr Alloy Tool Steel Die Provides Excellent Hardness, Toughness And Wear Resistance For Durability..
Widely Used: Accurately Cut, Repair Or Clean Threads. Straight Flute Tap Process Through Or Shallow Blind Holes And Remove Chips Downward. Die Is Suitable For Threads On Rods, Bolts, Screws, Pipes And Shafts, Or Just Remove Bolts And Threaded Rods. Great For Most Metals, Iron, Copper, Zinc, Alloy Steel, Abrasive Steel, Stainless Steel, Etc...
Features
- Tap and Die Set: Thread Size: 4-40 UNC (Right Hand); Tap Square Shank Width: 2.5mm / 0.1"; Tap Thread Length: 16mm / 0.63"; Tap Total Length: 50mm / 1.97"; Die Outside Diameter: 16mm / 0.63", Die Thickness: 4mm / 0.16"
- Widely Used: Accurately cut, repair or clean threads. Straight flute tap process through or shallow blind holes and remove chips downward. Die is suitable for threads on rods, bolts, screws, pipes and shafts, or just remove bolts and threaded rods. Great for most metals, iron, copper, zinc, alloy steel, abrasive steel, stainless steel, etc..
- Features: Tap & die with clear threads without burrs, right hand tapping direction. Thread die designed with conical lock hole, strong locking force and no loosening. Uncoated tools feature just the base substrate, great for a wide range of applications.
- Reliable Material: 6542 high-speed steel taps offer high hardness, good toughness, wear resistance, and excellent cutting performance. 9SiCr alloy tool steel die provides excellent hardness, toughness and wear resistance for durability.
- How to Use: Die is used with die stock wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened .Machine tap is used in drill presses, tapping, CNC and milling machines. Apply appropriate cutting lubricant or oil for higher quality threads and more durable tools.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Die Stock Handle Wrench Set, 8-32 UNC Round Die and 20mm Die Holder (Fits 1/8"-5/32" (UNC/UNF) / Metric M3-M4 / 20mm OD Dies) for Bolt Thread Repair
Asin: B0CQ1MMZ4N
Features: Zinc Alloy Steel Die Handle Offers High Hardness, Strength And Durability. Designed With 4 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. 9Sicr Alloy Tool Steel Thread Die Has High Hardness, High Torque, Wear Resistance, And High Tempering Resistance. Conical Lock Hole, Strong Locking Force And No Loosening..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Apply Suitable Cutting Oil Or Lubricant To The Workpiece And Die To Get Smoother, Cleaner Threads. Apply Even And Consistent Pressure While Turning The Die Stock..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Wide Applications: Can Accurately Cut, Repair Or Clean Male Threads On Rods, Bolts, Screws, Pipes And Shafts, Or Just Remove Bolts And Threaded Rods. Suitable For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die Stock Wrench Set Size: Round Die: thread size: 8-32 UNC; outside diameter (OD): 20mm / 0.79"; thickness: 5mm / 0.2". Die Stock: fit die size: 1/8"-5/32" (unc/unf) / M3-M4 (metric) / 20mm OD die; die stock size: 20mm x 5mm / 0.79" x 0.2" (D*H). Die stock, also called die handle or die wrench, is use in round dies only.
- Wide Applications: Can accurately cut, repair or clean male threads on rods, bolts, screws, pipes and shafts, or just remove bolts and threaded rods. Suitable for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: Zinc alloy steel die handle offers high hardness, strength and durability. Designed with 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. 9SiCr alloy tool steel thread die has high hardness, high torque, wear resistance, and high tempering resistance. Conical lock hole, strong locking force and no loosening.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Apply suitable cutting oil or lubricant to the workpiece and die to get smoother, cleaner threads. Apply even and consistent pressure while turning the die stock.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Round Die Stock Handle Wrench Set, 5/16-18 UNC Threading Die and 25mm Die Holder (Fits: 16mm-25mm OD Die / M7-M8 Thread Die) Adjustable for Bolt Thread Repair
Asin: B093FB5PMG
Features: The Die Holder Provides Good Wear Resistance For Long Service Life. With 4 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Alloy Tool Steel Die Is Not Loose For Conical Locking Hole And Strong Locking, With Hardness, High Torque, Good Toughness And Wear-Resistance..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Application: The Die Handle Wrench Set Can Help To Process, Correct, Clean Male Threads, Or Repair Damaged Bolts And Threads, Or Just Remove Bolts And Threaded Rod. Great For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die & Wrench Set: Die Wrench: 25mm x 9mm die stock fits 16mm-25mm outside diameter die / M7-M8 thread die, with 5 adjustable screws Round Die: 5/16-18 UNC threading die with 25mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
- Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #15
uxcell 5/16-24 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die
Asin: B07SS6JGLQ | Model: a19050800ux0964 | PartNumber: a19050800ux0964
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 5/16-24 UNF; outside diameter (OD): 25mm / 1.0"; Thickness: 9mm / 0.35"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #16
uxcell M8 x 1.25mm Metric Left Hand Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B09839M5JX | Model: a21031100ux0276 | PartNumber: a21031100ux0276
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M8 x 1.25 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, left hand (reverse) tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #17
uxcell 8-32 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B07SWJCH8X | Model: a19050800ux0951 | PartNumber: a19050800ux0951
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 8-32 UNC; outside diameter (OD): 20mm / 0.8"; Thickness: 5mm / 0.2"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #18
uxcell 2pcs Tap and Die Set, 9/16-18 UNF Left Hand Thread Tap & Round Die, Tapping Threading Tool Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0CS5WZS5C
Features: Tap & Die With Clear Threads Without Burrs, Left Hand Tapping Direction. Thread Die Designed With Conical Lock Hole, Strong Locking Force And No Loosening. Uncoated Tools Feature Just The Base Substrate, Great For A Wide Range Of Applications..
How To Use: Die Is Used With Die Stock Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened .Machine Tap Is Used In Drill Presses, Tapping, Cnc And Milling Machines. Apply Appropriate Cutting Lubricant Or Oil For Higher Quality Threads And More Durable Tools..
Reliable Material: 6542 High-Speed Steel Taps Offer High Hardness, Good Toughness, Wear Resistance, And Excellent Cutting Performance. 9Sicr Alloy Tool Steel Die Provides Excellent Hardness, Toughness And Wear Resistance For Durability..
Widely Used: Accurately Cut, Repair Or Clean Threads. Straight Flute Tap Process Through Or Shallow Blind Holes And Remove Chips Downward. Die Is Suitable For Threads On Rods, Bolts, Screws, Pipes And Shafts, Or Just Remove Bolts And Threaded Rods. Great For Most Metals, Iron, Copper, Zinc, Alloy Steel, Abrasive Steel, Stainless Steel, Etc...
Features
- Tap and Die Set: Thread Size: 9/16-18 UNF (Left Hand); Tap Square Shank Width: 9mm / 0.35"; Tap Thread Length: 31mm / 1.22"; Tap Total Length: 95mm / 3.74"; Die Outside Diameter: 38mm / 1.5", Die Thickness: 14mm / 0.55"
- Widely Used: Accurately cut, repair or clean threads. Straight flute tap process through or shallow blind holes and remove chips downward. Die is suitable for threads on rods, bolts, screws, pipes and shafts, or just remove bolts and threaded rods. Great for most metals, iron, copper, zinc, alloy steel, abrasive steel, stainless steel, etc..
- Features: Tap & die with clear threads without burrs, left hand tapping direction. Thread die designed with conical lock hole, strong locking force and no loosening. Uncoated tools feature just the base substrate, great for a wide range of applications.
- Reliable Material: 6542 high-speed steel taps offer high hardness, good toughness, wear resistance, and excellent cutting performance. 9SiCr alloy tool steel die provides excellent hardness, toughness and wear resistance for durability.
- How to Use: Die is used with die stock wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened .Machine tap is used in drill presses, tapping, CNC and milling machines. Apply appropriate cutting lubricant or oil for higher quality threads and more durable tools.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell Thread Milling Taps, 5/8-11 UNC High Speed Steel (HSS) 4 Straight Flutes Machine Screw Thread Threading Tap, 6.3" Length (Extra Long)
Asin: B0B6RDP5RL | Model: a22051600ux0149 | PartNumber: a22051600ux0149
Applications: Suitable For Processing Through Holes Or Shallow Blind Holes . Used For Drilling And Tapping Aluminum, Stainless Steel, Copper, Hard Plastics, Etc.. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Or Electric Drills Use Is Not Recommended. Please Add Coolant When Tapping And Apply Anti-Rust Oil For Maintenance After Use To Prolong The Service Life..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
High Speed Steel: High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance, Heat Resistance. Features Just The Base Substrate Without Any Coatings, Good For General Purpose Thread Tapping..
Features
- Tap Size: Thread size: 5/8-11 UNC; total length: 160mm / 6.3" (approx.); accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping.
- Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search