Qty (2) Stabilus 3B-9015QW Rear Liftgate Tailgate Hatch Supports
Asin: B09MY8PZNT | Ean: 0840265718100 | UPC: 840265718100
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Compatible With The Following Oem Numbers: 15057528, 15057529, 15746120, 2745Ma, 3B-9015Qw, 610797, 9951Mz, 9952Mu, Rb8795923, Sg230036, Sg230057.
High Quality Supports, Designed To Last, And Meet Or Exceed Oem Specifications.
Rust-Resistant Piston Rod Extends Product Life..
Extended Length From Center Mount To Center Mount Is 24.69 In..
Features
- This listing includes 2 automotive Lift Supports For the Liftgate
- Extended Length from Center Mount to Center Mount is 24.69 in.
- Compatible with the following OEM Numbers: 15057528, 15057529, 15746120, 2745MA, 3B-9015QW, 610797, 9951MZ, 9952MU, RB8795923, SG230036, SG230057
- Rust-resistant piston rod extends product life.
- High Quality Supports, designed to last, and meet or exceed OEM specifications
- See more on Amazon...
Brand: Stabilus | Manufacturer: Stabilus
Dimensions: 2.00 x 24.69 x 2.00 inches | Weight: 1.70 pounds
See On Amazon Similar To Qty 2 Stabilus 3B9015QW Rear
#1
HelloAuto C1609209 16 inch 38Lb/169N Gas Struts 16 in Shocks Lift Support Spring for Topper Rear Window Truck Cap Camper Shell Canopy Snugtop are Leer are ATC Camper, Set of 2
Asin: B0CGHK988Z
✅ Reliable C16-09209 Gas Struts: Every Helloatuo Strut Is Meticulously Crafted From Heavy Gauge 45# Steel Piston, Thickened Precision Seamless Steel Cylinder Body And High-Pressure Bearing Oe Quality End Socket, Which Will Undergo Over 30 Rigorous Testing Procedures Including 96-Hour Salt Spray Test And An 18000 Compression Test, Helloauto Will Provide The Most Reliable Gas Struts To Support You No Matter In Sunshine, Rainy Or Snowy Day!.
✅ Helloauto Care: 18 Months Product Support - If You Encounter Any Questions Before Or After Purchasing, Just Click "Ask Seller" Beside Your Order From Us, We Will Solve The Problem For You Within 12 Hours!.
✅ Easy To Replace: Every Part Of Helloauto Gas Strut Is Constructed As Per Oem Specification, Only 3 Steps With A Flat Screwdriver Is Able To Finish The Installation, No Drilling Needed, And No Other Tools Required!.
✅ 16" C16-09209 Gas Shocks: Helloauto 16 Inch C16-09209 Gas Spring Shocks Could Be Used As The Replacement Struts For Leer Camper Shell, Truck Cap, A.R.E Window, Snugtop Pickup Topper Canopy, Interchange Number: C1609209, C16-09209, Se150p40m10, Please Check The Interchange Number On Your Old Struts (If Has) Before Purchasing!.
Features
- HelloAuto 16 inch 38Lb Gas Struts: Extended Length 16 inch(Center-to-Center), Compressed Length 9.8 inch(Center-to-Center), Force 38LB/169N Per Shock, End connector is 10mm Nylon Socket type; Package includes: 2 HelloAuto 16 inch Struts.
- 16 C16-09209 Gas Shocks: Helloauto 16 inch C16-09209 Gas Spring Shocks could be used as the replacement struts for leer camper shell, truck cap, A.R.E window, snugtop pickup topper canopy, Interchange Number: C1609209, C16-09209, SE150P40M10, please check the interchange number on your old struts (if has) before purchasing!
- Reliable C16-09209 Gas Struts: Every Helloatuo Strut is meticulously crafted from heavy gauge 45# Steel Piston, thickened precision seamless steel cylinder body and high-pressure bearing OE quality end socket, which will undergo over 30 rigorous testing procedures including 96-hour salt spray test and an 18000 compression test, HelloAuto will provide the most reliable gas struts to support you no matter in Sunshine, Rainy or Snowy Day!
- Easy To Replace: Every part of Helloauto Gas Strut is constructed as per OEM specification, only 3 steps with a flat screwdriver is able to finish the installation, no drilling needed, and no other tools required!
- HelloAuto Care: 18 months product support - if you encounter any questions before or after purchasing, just click ask Seller beside your order from us, we will solve the problem for you within 12 hours!
- See more on Amazon...
Brand: HelloAuto | Manufacturer: HelloAuto
Dimensions: 0.10 x 5.00 x 0.50 Inches
See On Amazon #2
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B07F946Z1V | Model: 157094-45-10 | PartNumber: 157094-45-10
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-23993 Or Stabilus #14269. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 45 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Medium Height And Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 45 Lbs Of Pressure, For A Total Of 90 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 90 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 60-80 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 45 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for medium height and weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that it can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approximately 60-80 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-23993 or Stabilus #14269. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 Inches
See On Amazon #3
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 38 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B01K1I47J0 | Model: 16”, 38 lbs | PartNumber: 16”, 38 lbs | Ean: 0709832096419 | UPC: 709832096419
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-09209 Or Stabilus # 01824. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 38 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 38 Lbs Of Pressure, For A Total Of 76 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 76 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 50-70 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 38 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 38 lbs of pressure, for a total of 76 lbs of pressure. Please note that this does not mean that it can lift something that is 76 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-09209 or Stabilus # 01824. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 Inches | Weight: 0.75 Pounds
See On Amazon #4
16" 55Lbs/249N Gas Shock Strut for Leer are Camper Shell Topper Rear Window, Truck Cab Canopy Door, Set of 2 Vepagoo.
Asin: B08FJ1F2RY | Ean: 0724500131643 | UPC: 724500131643
🧡[Note] Please Confirm The Length Before Ordering. Measure The Distance From The Center Of The Socket To The Center Of The Socket..
🧡[12+1 Month Replacement Service] Welcome To Click "Ask Seller" Beside Your Order For In-Time Assistance If Any Problem Occurs!.
🧡[Interchange Part Number] C16-23994. Stabilus # 025657. Easy To Install, No Special Tools Required. End Fiting: 10Mm Ball Stud Sockets..
🧡[Parameter] Compressed Length (Center-To-Center): 9.4In (239Mm). Extended Length (Center-To-Center): 15.7In (399Mm). Force: 55 Lbs/249N Per Strut..
Features
- [Most used for] 16inch 55Lb/249N gas shock struts compatible with Leer ARE SnugTop camper shell truck topper rear window, Truck Pickup Cab Canopy Door and other custom Applications.
- [Parameter] Compressed Length (Center-to-Center): 9.4in (239mm). Extended Length (Center-to-Center): 15.7in (399mm). Force: 55 Lbs/249N per Strut.
- [Note] Please confirm the length before ordering. Measure the distance from the center of the socket to the center of the socket.
- [Interchange Part Number] c16-23994. Stabilus # 025657. Easy to install, no special tools required. End Fiting: 10mm Ball Stud Sockets.
- [12+1 MONTH REPLACEMENT SERVICE] Welcome to Click Ask Seller BESIDE YOUR ORDER for In-time Assistance if any problem occurs!
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #5
C16-04145 15 inch 24Lbs/107N Gas Shocks Struts for are Leer Snugtop Camper Topper Shell Rear Window, Truck Canopy Cap Cover, Cabinets Door, Set of 2 Vepagoo.
Asin: B08JYXBL8B | Model: SH240A | PartNumber: SH240A | Ean: 0746827165163, 0746827173083 | UPC: 746827173083, 746827165163
🍎【Note】Please Compare The Length Of Your Original Gas Spring' Compression And Extension, Type Of Connector, And Lift Capability Before Purchasing..
🍎【12+1 Month Replacement Service】Welcome To Click "Ask Seller" Beside Your Order For In-Time Assistance If Any Problem Occurs..
🍎【Interchange Number】C16-04145 C16-04145. Easy To Install, No Special Tools Required. End Fitting: 10Mm Sockets..
🍎【Parameter】Compressed Length (Center-To-Center):14.45"(367Mm), Extended Length (Center-To-Center): 8.98" (228Mm), Force: 24 Lbs Per Strut, Two Are 48Lb..
Features
- Most used for C16-04154 14.45 inch 24Lbs/107N gas shock strut compatible with 14''-15''/19lb-26.5lbLeer ARE SnugTop camper shell truck topper rear window, Truck Pickup Cab Canopy Door, Cabinets Door and other custom Applications.
- Parameter Compressed Length (Center-to-Center):14.45(367mm), Extended Length (Center-to-Center): 8.98 (228mm), Force: 24 Lbs Per Strut, two are 48LB.
- Note Please compare the length of your original gas spring' compression and extension, type of connector, and lift capability before purchasing.
- INTERCHANGE NUMBER C16-04145 C16-04145. Easy to install, no special tools required. End Fitting: 10mm Sockets.
- 12+1 MONTH REPLACEMENT SERVICE Welcome to Click Ask Seller BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #6
2 Truck Upfitters 13" Gas Props (13" Extended, 8.1" Compressed, 30 pounds of Pressure ea) for A.R.E, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B01K9DF5RA | Model: 13”, 30 lbs | PartNumber: 13”, 30 lbs | Ean: 0709832096426 | UPC: 709832096426
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04464 Or C16-04464A Or Stabilus # 0516. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 30 Pound (Each) Gas Struts. 13.0" Extended Length & 8.1" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Windows / Camper Shell Doors. Each Canopy Shock Has 30 Lbs Of Pressure, For A Total Of 60 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 60 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 30-50 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure camper struts from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 30 pound (each) gas struts. 13.0 extended length & 8.1 compressed length. This size of door shock absorber is for tall medium weight rear or side camper windows / camper shell doors. Each canopy shock has 30 lbs of pressure, for a total of 60 lbs of pressure. Please note that this does not mean that it can lift something that is 60 lbs. the typical hinged-style door weight for this prop is approximately 30-50 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-04464 or c16-04464A or Stabilus # 0516. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 2.00 x 13.50 x 0.50 Inches | Weight: 0.75 Pounds
See On Amazon #7
C1608584 14" 60Lbs/267N Gas Struts Spring Lift Support Shock for are Snugtop Leer Camper Shell Truck Topper Rear Window Truck Hood Bed Cap Canopy Door Boat Hatch Toolbox Lid 2pcs by IAQWE
Asin: B0BNBQSJ7K | Model: C1608584 | PartNumber: C1608584 | Ean: 0746827178439 | UPC: 746827178439
♦️60Lbs Gas Struts♦️ Suitable For Camper Shell, Truck Topper Window, Leer Are Atc Camper Topper, Rear Window, Truck Topper Bed And So On. Scope Of Application: 45-66Lbs. Your Diy Can Create More Possibilities For Gas Shocks, Looking Forward To Your Diy Creations!.
♦️Package Contents.♦️ 2Pcs* 14Inch Gas Struts, 1Pc*Installation Manual. Welcome Guide And Friendly Customer Service..
♦️Premium 14 Inch Gas Struts♦️ Iaqwe Gas Spring Can Work Normally In Patio, Topper Window, Underground Hatch, Boat, Garbage Bin Cover, Tool Box Lid, Tent And Other Outdoor Areas. As The Best And Reliable Gas Spring Manufacturer, Iaqwe Will Always Stand Behind You To Provide You With The Strongest Support..
♦️14 Inch Gas Shocks♦️ Interchange Number: 6921,C1608584..
Features
- GAS SPRING PARAMETER Force: 60 Pound 14 inch per Strut, a pair of 2 shocks. Extended Length( hole to hole): 13.98 , Compressed Length( hole to hole): 8.50 . Very Strong! Can not compress directly by your hands.
- 14 INCH GAS SHOCKS Interchange number: 6921,C1608584.
- 60Lbs GAS STRUTS Suitable for Camper Shell, Truck Topper Window, Leer ARE ATC Camper Topper, Rear Window, Truck Topper Bed and so on. Scope of application: 45-66lbs. Your DIY can create more possibilities for Gas Shocks, looking forward to your DIY creations!
- PREMIUM 14 INCH GAS STRUTS IAQWE gas spring can work normally in patio, topper window, Underground hatch, boat, garbage bin cover, tool box lid, tent and other outdoor areas. As the best and reliable gas spring manufacturer, IAQWE will always stand behind you to provide you with the strongest support.
- Package contents. 2Pcs* 14inch Gas Struts, 1Pc*Installation Manual. Welcome guide and friendly customer service.
- See more on Amazon...
Brand: IAQWE | Manufacturer: IAQWE
See On Amazon #8
ML3385 15Inch 90Lb/400N Gas Strut Shock Spring Lift Support for are Leer Snugtop Truck Camper Shell Rear Topper Window TV RV Cabinet Door Toy Truck Box Toolbox Trap Door Lid Floor Hatch 2PCS by IAQWE
Asin: B0BK8ZVGZ5 | Ean: 0746827178002 | UPC: 746827178002
[90Lbs Gas Struts]: Suitable For Camper Shell Windows Doors, Truck Topper Window, Leer Are Atc Camper Topper Rear Windows, Tonneau Cover Toolbox Lid And So On. Your Diy Can Create More Possibilities For Gas Shocks, Looking Forward To Your Diy Creations! 💡💡.
[Gas Spring Support]: 36 Months Replacement Support. Any Issues, Just Mail Us Via Amazon, And We Will Solve For You Within 24Hrs.💡💡.
[Premium 15 Inch Gas Struts]: Our Products Are Suitable For Various Harsh Weather Environments Such As Outdoor Heavy Rain And Minus 104℉. As The Best And Reliable Gas Spring Manufacturer, Iaqwe Will Always Stand Behind You To Provide You With The Strongest Support.💡💡.
[15 Inch Gas Shocks]: Package Include Struts* 2, Installation Guide* 1. Interchage Number: Gs515090,Gsni865290,Ml3385,Ml3390,Se150p90,Sl3385,Sl33851,Sl33855,Sl3390,Sl33901,Sl33905,Spdgs515090,Spdgsni515090.💡💡.
Features
- [GAS SPRING PARAMETER]: Force: 90Lbs/400N 15 Inch per Strut, a pair of 2 shocks. Extended Length( hole to hole): 15 , Compressed Length( hole to hole): 8.82 . Ball Joint Diameter: 10mm Ball Sockets. Very Strong! Can not compress directly by your hands.
- [15 INCH GAS SHOCKS]: Package include Struts* 2, Installation Guide* 1. Interchage Number: GS515090,GSNI865290,ML3385,ML3390,SE150P90,SL3385,SL33851,SL33855,SL3390,SL33901,SL33905,SPDGS515090,SPDGSNI515090.
- [90LBs GAS STRUTS]: Suitable for Camper Shell Windows Doors, Truck Topper Window, Leer ARE ATC Camper Topper Rear Windows, Tonneau Cover Toolbox Lid and so on. Your DIY can create more possibilities for Gas Shocks, looking forward to your DIY creations!
- [PREMIUM 15 INCH GAS STRUTS]: Our products are suitable for various harsh weather environments such as outdoor heavy rain and minus 104 . As the best and reliable gas spring manufacturer, IAQWE will always stand behind you to provide you with the strongest support.
- [GAS SPRING SUPPORT]: 36 Months Replacement Support. Any issues, just mail us via Amazon, and we will solve for you within 24HRS.
- See more on Amazon...
Brand: IAQWE | Manufacturer: IAQWE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #9
HelloAuto C1616411 C16-02648 17 inch 35lb/156N Per Prop, Gas Struts Shock Spring Lift Support for Leer A.R.E Camper Shell Truck Cap Topper Rear Windows Replacement Pickup Cab Canopy Door, Pack of 2
Asin: B0CGH9QG92
✅Easy To Replace: Every Part Of Helloauto Gas Strut Is Constructed As Per Oem Specification, Only 3 Steps With A Flat Screwdriver Is Able To Finish The Installation, No Drilling Needed, And No Other Tools Required!.
✅Helloauto Care: 18 Months Product Support - If You Encounter Any Questions Before Or After Purchasing, Just Click "Ask Seller" Beside Your Order From Us, We Will Solve The Problem For You Within 12 Hours!.
✅C1616411 17 Inch Gas Prop Struts: C16-14732 Struts Could Be Used As The Replacement Parts For Truck Topper, Motorcycle Trailer Door, Truck Cap Shell, Camper Shell Window Glass, Leer Window, Etc..
✅17 Inch Gas Spring: Interchange Part Number: 1592Em, C1616411, C16-16411, C16-14732, C1602648,Ml1635, Ml16-35, Ml-16-35, Ml3635, Ml36-35, Ml-36-35, Se172p35, Sl1635, Sl16-35, Sl-1635, Sl-16-35, Sl16351, Sl16-35-1, Sl-16351, Sl-16-35-1, Sl16355, Sl16-35-5, Sl-16355, Sl-16-35-5, Sl3635, Sl36-35, Sl-3635, Sl-36-35, Please Check The Interchange Number On Your Old Struts (If Has) Before Purchasing!.
Features
- 17 inch Gas Strut: Extended length: 17 Inch(center to center), Compressed length: 10Inch(center to center). 35 Lb / 156 N per strut, 2 PACK. Package contains 17in camper shell struts*2.
- 17 inch Gas Spring: Interchange Part number: 1592EM, C1616411, C16-16411, C16-14732, c1602648,ML1635, ML16-35, ML-16-35, ML3635, ML36-35, ML-36-35, SE172P35, SL1635, SL16-35, SL-1635, SL-16-35, SL16351, SL16-35-1, SL-16351, SL-16-35-1, SL16355, SL16-35-5, SL-16355, SL-16-35-5, SL3635, SL36-35, SL-3635, SL-36-35, please check the interchange number on your old struts (if has) before purchasing!
- Easy To Replace: Every part of Helloauto Gas Strut is constructed as per OEM specification, only 3 steps with a flat screwdriver is able to finish the installation, no drilling needed, and no other tools required!
- C1616411 17 inch Gas Prop Struts: C16-14732 struts could be used as the replacement parts for truck topper, motorcycle trailer door, truck cap shell, camper shell window glass, leer window, etc.
- HelloAuto Care: 18 months product support - if you encounter any questions before or after purchasing, just click ask Seller beside your order from us, we will solve the problem for you within 12 hours!
- See more on Amazon...
Brand: HelloAuto | Manufacturer: HelloAuto
See On Amazon #10
Qty (2) Stabilus 4B-595344 Rear Window Glass Lift Supports (Not For Liftgate)
Asin: B09MYN86XZ | Ean: 0840265700600 | UPC: 840265700600
Compatible With The Following Oem Numbers: 13977, 15029087, 15029087Lh, 15029088, 15029088Rh, 2747Mr, 3801Mc, 3998Ls, 4017Ls, 4185, 4B-595344, 613137, 8196035, Rb8795334, Sg330025.
High Quality Supports, Designed To Last, And Meet Or Exceed Oem Specifications.
Rust-Resistant Piston Rod Extends Product Life..
Extended Length From Center Mount To Center Mount Is 18.03 In..
Features
- This listing includes 2 automotive Lift Supports For the Rear Glass Window
- Extended Length from Center Mount to Center Mount is 18.03 in.
- Compatible with the following OEM Numbers: 13977, 15029087, 15029087LH, 15029088, 15029088RH, 2747MR, 3801MC, 3998LS, 4017LS, 4185, 4B-595344, 613137, 8196035, RB8795334, SG330025
- Rust-resistant piston rod extends product life.
- High Quality Supports, designed to last, and meet or exceed OEM specifications
- See more on Amazon...
Brand: Stabilus | Manufacturer: Stabilus
Dimensions: 2.00 x 18.03 x 2.00 inches | Weight: 1.00 pounds
See On Amazon #11
PAMAGOO 15 inch 40 lbs Gas Shock C16-21702, 15" Gas Prop Spring Strut Lift for Leer Snugtop Camper Shell Rear Topper Window Pickup Cab Canopy Door Cabinets Door Toolbox Lid, 2 Pack
Asin: B0BBRV27G8
🚙Scope Of Application🚙 Perfect Oem Replacement 15 Inch Gas Sturt Shock For C16-21702: Precisely Designed According To The Original Gas Shock, Prop Shock Can Be Used In Your Camper Shell Door Glass Window Hatch Strut/Pickup Canopy Leer Truck Rear Hatch Door Cover Glass Aluminum Hatch/Hot Tub Cover/Hatchback Glass Door/Motorehome's Compartment Door/Rv Bottom Door/Spa Cover Lift/Tool Box..
🚙Our Promise🚙 Every Pamagoo Gas Struts Has Been Undertaken With 180,000 Times Durability Test To Ensure Its Service Life And Smooth Working Performance, Pamagoo Will Provide 18 Months Replacement Support To Ensure Your No-Worries Using!.
🚙Easy To Install Lift Support Struts🚙 We Have Gas Spring Installation Videos And Online Service To Guide Quick Installation In Minutes, Just Use A Small Screwdriver To Pry Up The Metal Clip Of The Old Strut To Remove It, And Then Align The New Strut Onto The End Fitting Of Your Car, Press With Your Finger To Snap It Into Place, Done!.
🚙Interchange Number🚙 This 1 Pair Of Pamagoo Lift Struts Could Perfectly Replace The Worn-Out Shocks,Interchange Number: C16-21702, C1621702..
Features
- 15 inch gas spring parameters Extended Length: 14.96 inch; Compressed Length: 9.45 inch. Force 40 lbs Per Strut. Include 1 Pair Gas Struts. It is recommended to use a pair on both sides at the same time. ** Couldn't be compressed by HANDS.**
- INTERCHANGE NUMBER This 1 pair of Pamagoo lift struts could perfectly replace the worn-out shocks,Interchange number: C16-21702, C1621702.
- Scope of application Perfect OEM Replacement 15 inch gas sturt shock for C16-21702: Precisely designed according to the original gas shock, prop shock can be used in your Camper Shell Door Glass Window Hatch Strut/Pickup Canopy Leer Truck Rear Hatch Door Cover Glass Aluminum Hatch/Hot Tub Cover/Hatchback Glass Door/Motorehome's Compartment Door/RV Bottom Door/Spa Cover Lift/Tool Box.
- Easy to install lift support struts We have gas spring installation videos and online service to guide quick installation in minutes, just use a small screwdriver to pry up the metal clip of the old strut to remove it, and then align the new strut onto the end fitting of your car, press with your finger to snap it into place, done!
- Our promise every Pamagoo gas struts has been undertaken with 180,000 times durability test to ensure its service life and smooth working performance, Pamagoo will provide 18 months replacement support to ensure your no-worries using!
- See more on Amazon...
Brand: PAMAGOO | Manufacturer: Pamagoo
See On Amazon #12
Stabilus E-90 Trunk Strut Set Left and Right (x2) OEM
Asin: B015SGOOL6 | Model: E 90 | PartNumber: E 90 | Ean: 0789398779414 | UPC: 789398779414
Recently Made By Stabilus (Oem).
Please See Fitment Chart Below, Under Product Description.
Note: For Sedans (4-Door) Only, Not For Coupes, Wagons, Nor Conv..
Part Number 51 24 7 250 308, Check Fit Below.
Features
- Trunk Shock - Gas Pressurized Support Left AND Right (set of 2)
- Part Number 51 24 7 250 308, check fit below
- Recently made by STABILUS (OEM)
- NOTE: For Sedans (4-door) only, not for Coupes, Wagons, nor Conv.
- Please see FITMENT CHART below, under PRODUCT DESCRIPTION
- See more on Amazon...
Brand: Stabilus | Manufacturer: STABILUS
See On Amazon #13
Qty (2) Stabilus 3B-055236 Fits HR-V 2016 2017 2018 Liftgate Hatch Lift Supports
Asin: B09L5HDHM6 | Ean: 0840265709061 | UPC: 840265709061
Compatible With The Following Oem Numbers: , 055236, 3B-055236, 74820T7jh01, 74820-T7j-H01, 74820T7jh012m1, 74820T7jh110m1, 74820T7jh111m1, 74870T7jh01, 74870-T7j-H01, 74870T7jh012m1, 74870T7jh110m1, 74870T7jh111m1, Sg326027.
High Quality Supports, Designed To Last, And Meet Or Exceed Oem Specifications.
Rust-Resistant Piston Rod Extends Product Life..
Extended Length From Center Mount To Center Mount Is 22.56 In..
Features
- This listing includes 2 automotive Lift Supports For the Liftgate
- Extended Length from Center Mount to Center Mount is 22.56 in.
- Compatible with the following OEM Numbers: , 055236, 3B-055236, 74820T7JH01, 74820-T7J-H01, 74820T7JH012M1, 74820T7JH110M1, 74820T7JH111M1, 74870T7JH01, 74870-T7J-H01, 74870T7JH012M1, 74870T7JH110M1, 74870T7JH111M1, SG326027
- Rust-resistant piston rod extends product life.
- High Quality Supports, designed to last, and meet or exceed OEM specifications
- See more on Amazon...
Brand: Stabilus | Manufacturer: Stabilus
Dimensions: 2.00 x 22.56 x 2.00 Inches
See On Amazon #14
Qty (2) Stabilus SG102006 Fits BMW X3 2011 To 2017 Rear Liftgate Lift Supports W/O Power Gate
Asin: B01KPER2QA | Ean: 0719926126946 | UPC: 719926126946
Compatible With The Following Oem Numbers: 199731, 200687, 491915, 492154, 51 24 211 289, 51247211289, 569070, 721128906, Sg102006,.
High Quality Supports, Designed To Last, And Meet Or Exceed Oem Specifications.
Rust-Resistant Piston Rod Extends Product Life..
Extended Length From Center Mount To Center Mount Is 25.73 In..
Features
- This listing includes 2 automotive Lift Supports For the Liftgate
- Extended Length from Center Mount to Center Mount is 25.73 in.
- Compatible with the following OEM Numbers: 199731, 200687, 491915, 492154, 51 24 211 289, 51247211289, 569070, 721128906, SG102006,
- Rust-resistant piston rod extends product life.
- High Quality Supports, designed to last, and meet or exceed OEM specifications
- See more on Amazon...
Brand: SACHS | Manufacturer: Sachs
Dimensions: 2.00 x 25.73 x 2.00 Inches | Weight: 0.90 pounds
See On Amazon #15
Qty (2) Stabilus 4B-9918VF Rear Side Panel Door Lift Supports
Asin: B073LKZ51J | Ean: 0719926138376, 0840265716977 | UPC: 840265716977, 719926138376
Compatible With The Following Oem Numbers: 15176196, 4B-9918Vf, 6901, 8196360, Sg330047.
High Quality Supports, Designed To Last, And Meet Or Exceed Oem Specifications.
Rust-Resistant Piston Rod Extends Product Life..
Extended Length From Center Mount To Center Mount Is 20.67 In..
Features
- This listing includes 2 automotive Lift Supports For the Rear Side Panel
- Extended Length from Center Mount to Center Mount is 20.67 in.
- Compatible with the following OEM Numbers: 15176196, 4B-9918VF, 6901, 8196360, SG330047
- Rust-resistant piston rod extends product life.
- High Quality Supports, designed to last, and meet or exceed OEM specifications
- See more on Amazon...
Brand: Stabilus | Manufacturer: Stabilus
Dimensions: 2.00 x 20.67 x 2.00 inches | Weight: 1.00 pounds
See On Amazon #16
Qty (2) Stabilus 4B-032492 Fits ForTwo 2008 To 2014 Rear Window Lift Supports
Asin: B09NCFMYPV | Ean: 0840265705797 | UPC: 840265705797
Compatible With The Following Oem Numbers: 016618, 032492, 052113, 2515Te, 451 988 00 04, 4519880004, 4B-032492, 751919, 926-330040-001, 92633040001, A4519880004, Se172p25n10s, Sg357001.
High Quality Supports, Designed To Last, And Meet Or Exceed Oem Specifications.
Rust-Resistant Piston Rod Extends Product Life..
Extended Length From Center Mount To Center Mount Is 17.52 In..
Features
- This listing includes 2 automotive Lift Supports For the Rear Glass Window
- Extended Length from Center Mount to Center Mount is 17.52 in.
- Compatible with the following OEM Numbers: 016618, 032492, 052113, 2515TE, 451 988 00 04, 4519880004, 4B-032492, 751919, 926-330040-001, 92633040001, A4519880004, SE172P25N10S, SG357001
- Rust-resistant piston rod extends product life.
- High Quality Supports, designed to last, and meet or exceed OEM specifications
- See more on Amazon...
Brand: Stabilus | Manufacturer: Stabilus
Dimensions: 2.00 x 17.52 x 2.00 inches | Weight: 1.30 pounds
See On Amazon #17
SACHS STABILUS SG359015 UNIVERSAL APPLICATIONS Lift Support, black
Asin: B00CFQT512 | Model: SG359015 | PartNumber: SG359015 | Ean: 0708609078269 | UPC: 708609078269
For Confirmed Fitment, Please Verify Your Vehicle With The Amazon 'Check Fit' Option.
Rod End: Ball Socket 10Mm / Tube End: Ball Socket 10Mm.
Extended-Inch: 19.685 / Compressed-Inch: 11.654 / Force: 80-Lb.
General Application: Universal Applications.
Features
- SACHS Stabilus Lift Supports are engineered to restore the lifting functionality for your specific vehicle - ensuring first time fit and lifting performance.
- General Application: UNIVERSAL APPLICATIONS
- For confirmed fitment, please verify your vehicle with the Amazon 'Check Fit' option
- Extended-Inch: 19.685 / Compressed-Inch: 11.654 / Force: 80-LB
- Rod End: Ball Socket 10mm / Tube End: Ball Socket 10mm
- See more on Amazon...
Brand: SACHS | Manufacturer: Sachs
Dimensions: 2.00 x 25.00 x 3.00 inches
Warranty: 1 year manufacturer
See On Amazon #18
Qty 2 Stabilus 4B-3521VC Fits Grand Cherokee 99 To 04 Liftgate Supports
Asin: B0C39XTGMG | Ean: 0840265764206 | UPC: 840265764206
Compatible With The Following Oem Numbers: 010654, 3521Vc, 4B-3521Vc, 5513 6760Aa, 7022Ab, 7023Ab, 55136760Aa, 55137022Ab, 55137023Ab, 8194753, Sg314030.
High Quality Supports, Designed To Last, And Meet Or Exceed Oem Specifications.
Rust-Resistant Piston Rod Extends Product Life..
Extended Length From Center Mount To Center Mount Is 18.43 In..
Features
- This listing includes 2 automotive Lift Supports For the Liftgate
- Extended Length from Center Mount to Center Mount is 18.43 in.
- Compatible with the following OEM Numbers: 010654, 3521VC, 4B-3521VC, 5513 6760AA, 7022AB, 7023AB, 55136760AA, 55137022AB, 55137023AB, 8194753, SG314030
- Rust-resistant piston rod extends product life.
- High Quality Supports, designed to last, and meet or exceed OEM specifications
- See more on Amazon...
Brand: Stabilus | Manufacturer: Stabilus
Dimensions: 2.00 x 18.43 x 2.00 Inches | Weight: 1.10 pounds
See On Amazon #19
Qty (2) Stabilus 3B-909641 Fits Flex 09 to 12 Liftgate Lift Supports With Power Gate
Asin: B00JUARU86 | Ean: 0719926118767 | UPC: 719926118767
Compatible With The Following Oem Numbers: 3B-909641, 3B-909641-Fba, 7427Zm, 8A87374406a11bc, 8A873-74406A11-Bc, 8A8z 74406A10-B, 74406A11-B, 8A8z74406a10b, 8A8z74406a11b, Sg204067.
High Quality Supports, Designed To Last, And Meet Or Exceed Oem Specifications.
Rust-Resistant Piston Rod Extends Product Life..
Extended Length From Center Mount To Center Mount Is 23.27 In..
Features
- This listing includes 2 automotive Lift Supports For the Liftgate
- Extended Length from Center Mount to Center Mount is 23.27 in.
- Compatible with the following OEM Numbers: 3B-909641, 3B-909641-FBA, 7427ZM, 8A87374406A11BC, 8A873-74406A11-BC, 8A8Z 74406A10-B, 74406A11-B, 8A8Z74406A10B, 8A8Z74406A11B, SG204067
- Rust-resistant piston rod extends product life.
- High Quality Supports, designed to last, and meet or exceed OEM specifications
- See more on Amazon...
Brand: SACHS | Manufacturer: Sachs
Dimensions: 2.00 x 23.27 x 2.00 inches | Weight: 1.70 pounds
See On Amazon
Looking For Something Else?
Search