Norseman by Viking Drill and Tool 26033 Vortex-Point 9/16 in. 130-VT
Asin: B09P3ZRNX7 | Model: 26033 | PartNumber: 26033 | Ean: 0050728260330 | UPC: 050728260330
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Stay Sharp Up To 4X Longer Compared To Conventional And Other Specialty Tip Design.
6 In. Oal.
Recommended For Cast Iron, Brass, Sheet Metal, Plastic, Mild Steel, Copper, Hardened Steel..
Easily Enlarges Existing Holes Without Damaging The Point.
Features
- Unique tip geometry reduces heat generation & cutting tool wear increasing tool life.
- Easily enlarges existing holes without damaging the point
- Stay sharp up to 4X longer compared to conventional and other specialty tip design
- Recommended for Cast iron, Brass, Sheet metal, Plastic, Mild steel, Copper, Hardened steel.
- 6 in. OAL
- See more on Amazon...
Brand: Norseman | Manufacturer: Viking Drill and Tool
Dimensions: 0.51 x 6.25 x 0.82 inches | Weight: 0.15 pounds
See On Amazon Similar To Norseman by Viking Drill and
#1
bylikeho Car Scratch Repair,Scratch Remover for Vehicles,Car Remover Scratch Paint Pen Car Touch Up Paint Fill Paint Pen,Car Accessories Touch-up Pen Car Scratch Remover for Deep Scratches (Black)
Asin: B0CPFBBNDD | Model: 1201DTYQB001 | PartNumber: 1201DTYQB001
[Function] Excellent Design For Removing Coatings And Repairing Car Scratches. Minor Car Scratches Can Cause Serious Damage. It Not Only Makes Your Car Look Unsightly, But Also Exposes The Metal Underneath The Paint To The Air, Causing Rust. This Car Repair Paint Filling Pen Can Save You A Lot Of Money To Repair Small Scratches..
[Tip] After Light Polishing On The Paint Surface, The Paint Will Be More Glossy, And The Color Difference Between The Repaired Area And The Original Car Paint Will Be Coordinated And Consistent. The Repaired Paint Surface Will Be More Natural. Please Try On Paper Before Use To Confirm That The Color Matches The Paint On Your Vehicle..
[Instructions] 1. Clean The Scratched Area Before Use. 2. Remove Wax From The Scratched Area. 3. Remove Rust. 4. Shake The Pen About 20-40 Times Before Use. About 20 Seconds. 5. Please Use On Sunny Days To Ensure The Effectiveness Of The Product..
[Multiple Colors] The Car Paint Is Specially Prepared With The Original Color Code, And The Color Of The Car Paint Is Accurate. We Provide Multiple Colors For You To Choose From. Please Confirm The Color Of The Car Paint Before Purchasing..
Features
- [Soft Brush Head] The soft brush head design of the car repair paint pen makes the repair of scratches on the car paint surface more accurate and easy, waterproof, portable, and very practical.
- [Multiple Colors] The car paint is specially prepared with the original color code, and the color of the car paint is accurate. We provide multiple colors for you to choose from. Please confirm the color of the car paint before purchasing.
- [Function] Excellent design for removing coatings and repairing car scratches. Minor car scratches can cause serious damage. It not only makes your car look unsightly, but also exposes the metal underneath the paint to the air, causing rust. This car repair paint filling pen can save you a lot of money to repair small scratches.
- [Instructions] 1. Clean the scratched area before use. 2. Remove wax from the scratched area. 3. Remove rust. 4. Shake the pen about 20-40 times before use. About 20 seconds. 5. Please use on sunny days to ensure the effectiveness of the product.
- [Tip] After light polishing on the paint surface, the paint will be more glossy, and the color difference between the repaired area and the original car paint will be coordinated and consistent. The repaired paint surface will be more natural. Please try on paper before use to confirm that the color matches the paint on your vehicle.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
See On Amazon #2
Norseman Drill Bits 44170 Ultra Dex Type 240-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Set (29 Piece)
Asin: B00627C8ZU | Model: 44170 | PartNumber: 44170 | Ean: 7241870617940, 0787392585819, 0050728441708, 7535001839814 | UPC: 050728441708, 787392585819
Precision Ground Point, Flutes, Body, Clearance And Drill Diameter For Ultimate Accuracy And Performance.
Special Hi-Molybdenum Tool Steel/ Gold Oxide.
1/16 - 1/2 By 64Ths - Ultra Dex.
Features
- 29 pc. Ultra Dex Set Premium High Speed Steel Heavy Duty NAS 907B 135-Degree Split Point
- 1/16 - 1/2 by 64ths - Ultra Dex
- Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance
- Special Hi-Molybdenum tool steel/ Gold Oxide
- See more on Amazon...
Brand: Norseman | Manufacturer: Viking
Dimensions: 3.25 x 6.50 x 3.25 inches | Weight: 0.15 pounds
See On Amazon #3
bylikeho Car Cleaning Brush,Car Seat Belt Cleaning Brush,Non-Slip Brush Cleaner,Interior Car Cleaning Tool,Car Accessories U-Shaped Washing Tool,Double Sided Bristle Scrubber for Car Truck Seat Belt
Asin: B0CXLS9N5T | Model: 1417UXQJS001 | PartNumber: 1417UXQJS001
[Easy To Store] The Cleaning Brush Is Compact And Easy To Store. You Can Store It Anywhere, Making It Convenient For You To Use At Any Time..
[Excellent Gift] The U-Shaped Washing Brush Has A Size Of Approximately 3 X 3 X 2 Inches And Is Widely Used, Suitable For Cars, Trucks, Rvs, Suvs, And Other Vehicles..
[Keep Seat Belt Clean] The U-Shaped Cleaning Tool Can Easily Keep Seat Belts Clean, Never Worrying About Stains On Your Clothes. Say Goodbye To Dirt And Enjoy A More Comfortable Journey..
[Unique Design] The Brush Adopts A U-Shaped Design, And The Unique Surround Design Can Clean Both Sides At The Same Time, Keeping Fingers Away From Any Sharp Edges. The Textured Grip Ensures That It Will Not Slip During Use. Opposite Bristles For Effective Cleaning..
Features
- [High Quality Materials]This U-shaped cleaning brush is made of high-quality PP material, with high glossiness, good wear resistance, and excellent material, which can be reused for a long time. The plastic shell has smooth edges and a comfortable feel, making it easy to grip and providing you with a more comfortable experience.
- [Unique Design] The brush adopts a U-shaped design, and the unique surround design can clean both sides at the same time, keeping fingers away from any sharp edges. The textured grip ensures that it will not slip during use. Opposite bristles for effective cleaning.
- [Easy to Store] The cleaning brush is compact and easy to store. You can store it anywhere, making it convenient for you to use at any time.
- [Keep Seat Belt Clean] The U-shaped cleaning tool can easily keep seat belts clean, never worrying about stains on your clothes. Say goodbye to dirt and enjoy a more comfortable journey.
- [Excellent Gift] The U-shaped washing brush has a size of approximately 3 x 3 x 2 inches and is widely used, suitable for cars, trucks, RVs, SUVs, and other vehicles.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: No.
See On Amazon #4
Drill America 29 Piece Cobalt Stepped Point Drill Bit Set in Round Case w/Gold Oxide Finish for Drilling Acrylic, Steel, Hard Metals, Sizes 1/16" to 1/2" x 64ths, GSC Series ZMGSC29J-PC
Asin: B0BTTR9K6T | Model: ZMGSC29J-PC | PartNumber: ZMGSC29J-PC | Ean: 0887861316576 | UPC: 887861316576
135 Degree Cutting Angle: These Drill Bits Have A 135 Degree Split Point Tip And 3 -Flat Shank To Prevent Spinning; Sizes 11/64" And Smaller Have A Round Shank; Drill Bits Have A Gold Oxide Finish And Jobber Length.
About Drill America: Drill America Specializes In Supplying A Full Line Of Industrial And Contractor Cutting Tools Since 1923; Our Products Include Drills, Taps And Dies, Reamers, End Mills, Carbide Burs, Countersinks And More.
Inch Sizes Included: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64 And 1/2.
Best Uses: This 29Pc Set Comes With Storage Holder Case And Can Be Used As An Enlarger For Existing Holes Or To Create New, Smoother Holes For Multi Material Drilling In Acrylic, Steel, Brass And Other Hardened Metals.
Features
- GOLD STEPPED POINT COBALT: Drill America GSC Series Gold Stepped Point Cobalt Drill Bits start easier, drill faster, increase lifespan, and reduce heat compared to standard drill bits
- BEST USES: This 29pc set comes with storage holder case and can be used as an enlarger for existing holes or to create new, smoother holes for multi material drilling in acrylic, steel, brass and other hardened metals
- 135 DEGREE CUTTING ANGLE: These drill bits have a 135 degree split point tip and 3 -flat shank to prevent spinning; Sizes 11/64 and smaller have a round shank; Drill Bits have a gold oxide finish and jobber length
- INCH SIZES INCLUDED: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64 and 1/2
- ABOUT DRILL AMERICA: Drill America specializes in supplying a full line of industrial and contractor cutting tools since 1923; Our products include drills, taps and dies, reamers, end mills, carbide burs, countersinks and more
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #5
YAKEFLY 6 Pack Fuel Gas Tank Vent Caps,Leak-Proof Gas Jug Vent Caps Enhances Flow,Metal Gas Can Vent Cap Kit,Gas Tank Vent Cap Fuel Tank Exhaust Vent Valve Kit for Faster Refills
Asin: B0BYD52FJG | Model: 231QGTFM001 | PartNumber: 231QGTFM001
[Leak Proof Design] The Vent Cap Of The Fuel Gas Tank Is Equipped With A Screw Cap And A Double Rubber Sealing Ring, Which Provides Double Leak-Proof Protection To Prevent The Splashing And Overflow Of Liquid In The Tank..
[Easy To Assemble] Just Drill A Hole In The Oil Drum Or Container, Then Use The Wire With Connecting Valve Rod And Rubber Sealing Ring, And Then Use The Provided Cover To Fix The Nozzle. It Can Be Done Easily Even Without Any Manual Skills..
[Save Time] The Gas Tank Vent Cap And The Oil Tank Vent Can Increase The Flow To Speed Up The Refueling; The Gas Fuel Water Tank Can Speed Up The Flow Speed, Ensure Smooth And Fast Flow, And Save Your Time..
[High Quality And Durability] These Air Tank Exhaust Caps Are Made Of High-Quality Stainless Steel And Brass, Which Are Well Made, Rust-Proof, Wear-Resistant And Durable..
Features
- [Package Contents] The package contains 6 fuel gas tank ventilation caps, 1 drill bit, 1 wire and 2 wrenches. Package purchase is more convenient for you to use.
- [High Quality and Durability] These air tank exhaust caps are made of high-quality stainless steel and brass, which are well made, rust-proof, wear-resistant and durable.
- [Leak Proof Design] The vent cap of the fuel gas tank is equipped with a screw cap and a double rubber sealing ring, which provides double leak-proof protection to prevent the splashing and overflow of liquid in the tank.
- [Save Time] The gas tank vent cap and the oil tank vent can increase the flow to speed up the refueling; The gas fuel water tank can speed up the flow speed, ensure smooth and fast flow, and save your time.
- [Easy to Assemble] Just drill a hole in the oil drum or container, then use the wire with connecting valve rod and rubber sealing ring, and then use the provided cover to fix the nozzle. It can be done easily even without any manual skills.
- See more on Amazon...
Brand: YAKEFLY | Manufacturer: YAKEFLY
Warranty: Not Warranty Applicable
See On Amazon #6
Norseman 22903 1/16 in. - 1/2 in. Super Premium Black and Gold Oxide Hi-Molybdenum Steel Drill Bit Set, 29-Piece, grey
Asin: B08X95SCT7 | Model: 22903 | PartNumber: 22903 | Ean: 0050728229030 | UPC: 050728229030
Drill Through Sheet Metal, Hard Steel, Acrylics And Brass.
Twice The Life Of A Standard Drill Bit.
Self-Centering; 3-Flats On Shank.
Enlarge Existing Holes.
Features
- Sizes: 1/16 in., 5/64 in., 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 11/64 in., 3/16 in., 13/64 in., 7/32 in., 15/64 in., 1/4 in., 17/64 in., 9/32 in., 19/64 in., 5/16 in., 21/64 in., 11/32 in., 23/64 in., 3/8 in., 25/64 in., 13/32 in., 27/64 in., 7/16 in., 29/64 in., 15/32 in., 31/64 in., 1/2 in.
- Enlarge existing holes
- Drill through sheet metal, hard steel, acrylics and brass
- Self-centering; 3-flats on shank
- Twice the life of a standard drill bit
- See more on Amazon...
Brand: Norseman | Manufacturer: Viking Drill
Dimensions: 0.51 x 6.25 x 0.82 inches | Weight: 0.15 Pounds
See On Amazon #7
Fender Flares PRO The Original Universal Flexible Foam Rubber 2-Inch Fender EZ Flares XL
Asin: B0794BXHSQ | Model: EZFXL | PartNumber: EZFXL | Ean: 0862416000094 | UPC: 862416000094
Super Strong 3M Adhesive – Installs With High Quality 3M Adhesive That Can Withstand The Harshest Environments. With Proper Installation, Our Products Easily Withstand Car Washes And High Speeds..
Made In America – Designed And Manufactured In The Usa With Top Quality Materials And Craftsmanship. You Can Relax Knowing We Offer The Best Quality Universal-Fit Products..
One Size Fits All – Flexible Design Molds And Bends To The Shape Of Your Stock Of Aftermarket Fenders. Universal Compatibility Works On Any Make Or Model..
Enhanced Durability And Design – Extends Your Stock Or Aftermarket Fenders By Up To 2 Inches. Patented Invisedge Keeps Moisture Away While Giving You A Seamless Appearance. Made With Dura-X Foam Rubber For Longer Life And Protection...
Features
- ENHANCE & PROTECT YOUR RIDE EZ Lip Fender Flares PRO are a fast, easy, and low-cost way to give your car an aggressive, off-road look while keeping your paint protected from road debris.
- ENHANCED DURABILITY AND DESIGN Extends your stock or aftermarket fenders by up to 2 inches. Patented InvisEdge keeps moisture away while giving you a seamless appearance. Made with Dura-X Foam rubber for longer life and protection..
- SUPER STRONG 3M ADHESIVE Installs with high quality 3M adhesive that can withstand the harshest environments. With proper installation, our products easily withstand car washes and high speeds.
- ONE SIZE FITS ALL Flexible design molds and bends to the shape of your stock of aftermarket fenders. Universal compatibility works on any make or model.
- MADE IN AMERICA Designed and manufactured in the USA with top quality materials and craftsmanship. You can relax knowing we offer the best quality universal-fit products.
- See more on Amazon...
Brand: EZ Lip | Manufacturer: EZ Lip
Dimensions: 0.79 x 125.98 x 3.15 inches
See On Amazon #8
HIDOTOL Cobalt Drill Bit Set 29 PCS - M35 High Speed Steel Twist Jobber Drill Bits for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood with Indexed Round Case,1/16"-1/2" by 1/64" THS.
Asin: B08Z3GSR7S | Model: LZ-COBALT-19984 | PartNumber: LZ-COBALT-19984 | Ean: 0760051419984 | UPC: 760051419984
Widely Used - M35 Cobalt High Speed Steel Is More Suitable For Tough, High Tensile Strength Material. Particularly Successful In Cutting Harden Metals Such As Stainless Steel, Cast Iron, High Temperature Alloy, Titanium Alloy, Hard Plastics And Woods, And It Also Can Be Used For Softer Materials..
100% Satisfaction Guarantee - If You Are Not Fully Satisfied With Our Product For Any Reason, Please Feel Free To Contact Us, We Will Try Our Best To Serve You..
Specifications - Set Of 29Pcs Jobber Length Drill Bits Includes: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2", By 1/64" Increments..
Characteristics - 135° Split Point With Round Straight Shank, Self-Centering Prevent Walking, Make Drilling Precise And Faster. Fully Ground Twist Design Helps Clear Particles Faster, Decreases Friction And Heat For A Cooler Drilling Performance..
Features
- High Quality Material - High Speed Steel M35 (Cobalt 5%) provide extended tool life compared to ordinary drill bits when drilling hard materials.
- Characteristics - 135 split point with round straight shank, self-centering prevent walking, make drilling precise and faster. Fully Ground twist design helps clear particles faster, decreases friction and heat for a cooler drilling performance.
- Widely Used - M35 Cobalt High Speed Steel is more suitable for tough, high tensile strength material. Particularly successful in cutting harden metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and it also can be used for softer materials.
- Specifications - Set of 29pcs jobber length drill bits includes: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, 1/2, by 1/64 Increments.
- 100% Satisfaction Guarantee - If you are not fully satisfied with our product for any reason, please feel free to contact us, we will try our best to serve you.
- See more on Amazon...
Brand: HIDOTOL | Manufacturer: HIDOTOL
Dimensions: 3.50 x 6.54 x 4.29 inches | Weight: 2.82 Pounds
See On Amazon #9
ESEWALAS 2Pcs American Flag Car Door Lights Logo Projector,Car Door LED Logo Projector Light,Car Door Welcome Logo Projector Lights,Universal Holeless Magnet Sensor Ghost Shadow Welcome Lamp
Asin: B0C9PRT97C | Model: 639GQYBD001 | PartNumber: 639GQYBD001
[Easy Installation] These Door Courtesy Lights Are Easy To Install, Wireless Design, No Need To Drill Holes, And Will Not Cause Damage To Your Car. The Products Are Fixed With Double-Sided Tape, And Will Not Easily Fall Off From The Car..
[Perfect Gift] The Wireless Door Marker Light Projector Can Bring You More Driving Pleasure. The Perfect Gift For Husbands, Car Club Friends, Wives, Fathers, Sons, Friends, And Car Enthusiasts..
[Widely Applicable] There Are Two Projection Lights In The Packaging That Can Be Installed On The Left And Right Doors. This Type Of Door Projection Light Is Suitable For Most Cars, As Long As The Interior And Bottom Of The Door Are Flat. Please Confirm Whether Your Door Is Suitable For It Before Purchasing..
[Magnetic Induction Automatic Operation] The Door Light Logo Adopts A Magnetic Induction Design. When Installing, Simply Stick The Light To The Interior Door And Install The Magnet On The Threshold, So That The Projection Induction Area And Infrared Sensor Stickers Will Match Well. When You Open The Door (The Light Leaves The Magnet), The Projector Will Automatically Open. When You Close The Door (The Light Overlaps With The Magnet), The Projector Will Automatically Close, Which Is Very Convenient..
Features
- [Excellent Performance] The car door lamp logo projector is equipped with high-quality lamp beads, high definition and brightness, ensuring clear projection. Long lighting time, high stability, low power consumption, darker environment, better lighting effect.
- [Magnetic Induction Automatic Operation] The door light logo adopts a magnetic induction design. When installing, simply stick the light to the interior door and install the magnet on the threshold, so that the projection induction area and infrared sensor stickers will match well. When you open the door (the light leaves the magnet), the projector will automatically open. When you close the door (the light overlaps with the magnet), the projector will automatically close, which is very convenient.
- [Easy Installation] These door courtesy lights are easy to install, wireless design, no need to drill holes, and will not cause damage to your car. The products are fixed with Double-sided tape, and will not easily fall off from the car.
- [Widely Applicable] There are two projection lights in the packaging that can be installed on the left and right doors. This type of door projection light is suitable for most cars, as long as the interior and bottom of the door are flat. Please confirm whether your door is suitable for it before purchasing.
- [Perfect Gift] The wireless door marker light projector can bring you more driving pleasure. The perfect gift for husbands, car club friends, wives, fathers, sons, friends, and car enthusiasts.
- See more on Amazon...
Brand: ESEWALAS | Manufacturer: ESEWALAS
Warranty: no
See On Amazon #10
Zlirfy Oil Change Pump Extractor,12V 60W Oil Fluid Pump Extractor Scavenge Oil Suction Pump,Diesel Fluid Scavenge Suction Oil Transfer Pump,Oil Change Pump for Car Boat Motorbike Tractor Truck RV ATV
Asin: B0CB5V2VYB | Model: 665DDCYB001 | PartNumber: 665DDCYB001
[Easy Installation] The Oil Change Pump Extractor Is Easy To Install. Simply Place The Inlet And Outlet Hoses In A Suitable Position, Connect The Power Clip To The Car Battery, And Then Press The Button. This Process Is Very Simple, And You Can Often Do It Yourself To Ensure That Your Engine Runs Smoothly..
[Note] In Order To Pump The Oil Correctly, Please Start The Vehicle And Heat The Oil (To 40-60 Degrees Celsius) For Approximately 15 Minutes (To 104 ° F-140 ° F). Otherwise, The Oil Change Pump May Have Low Suction Or Blockage. This Oil Pump Is Not Used To Extract Water, Gearbox Oil (Too Viscous) Or Flammable Liquid (Fuel, Gasoline, Etc.)..
[Function] The Oil/Diesel Pump Extractor Can Siphon Oil From Your Cars, Motorcycles, Kick Scooter, Four-Wheel Bicycles, Trucks, Boats, Forklifts, Generators, Tractors, Riding Lawn Mowers, Etc. And Deliver Diesel To Cars, Trucks, Ships, Boats, Tractors, Agricultural Machinery, Factory Equipment, Etc. Without Confusion And Professional Tools..
[Safe And Efficient] The Motor Of The Engine Oil And Diesel Fluid Delivery Pump Is Made Of Pure Copper Material, With Good Conductivity, Corrosion Resistance, Rust Resistance, And Effective Prevention Of Electric Leakage Or Short Circuit. Equipped With Fuses For Safer Use. Low Speed Diesel Fuel Is About 2 Gallons Per Minute, And Engine Oil Is About 0.3 Gallons Per Minute.
Features
- [Including Packaging] The packaging includes: 1 pump; 1 piece of car cleaning cloth; 1 x outlet hose; 1 x inlet hose; 2 hose clamps; 2 battery clips.
- [Safe and Efficient] The motor of the engine oil and diesel fluid delivery pump is made of pure copper material, with good conductivity, corrosion resistance, rust resistance, and effective prevention of electric leakage or short circuit. Equipped with fuses for safer use. Low speed diesel fuel is about 2 gallons per minute, and engine oil is about 0.3 gallons per minute
- [Easy Installation] The oil change pump extractor is easy to install. Simply place the inlet and outlet hoses in a suitable position, connect the power clip to the car battery, and then press the button. This process is very simple, and you can often do it yourself to ensure that your engine runs smoothly.
- [Function] The oil/diesel pump extractor can siphon oil from your cars, motorcycles, Kick scooter, four-wheel bicycles, trucks, boats, forklifts, generators, tractors, riding lawn mowers, etc. and deliver diesel to cars, trucks, ships, boats, tractors, agricultural machinery, factory equipment, etc. without confusion and professional tools.
- [Note] In order to pump the oil correctly, please start the vehicle and heat the oil (to 40-60 degrees Celsius) for approximately 15 minutes (to 104 F-140 F). Otherwise, the oil change pump may have low suction or blockage. This oil pump is not used to extract water, gearbox oil (too viscous) or Flammable liquid (fuel, gasoline, etc.).
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
Warranty: no
See On Amazon #11
Norseman Super Premium Magnum 29 Piece Drill Bit Set - Orange Ultradex - 46962-135 Degree Split Point - Round Shank With Three Flats
Asin: B01MCUYTCX | Model: 46962 | PartNumber: 46962 | Ean: 0787392585826 | UPC: 787392585826
Three Flats Shank In Orange Case.
High Molybdenum Steel, Gold And Black Oxide. Made In The Usa.
29 Piece Jobber Length Drill Bit Set.
Features
- Norseman Drill & Tool 46962 Type 190-AQF Premium Ultra-Dex Bully
- 29 Piece Jobber Length Drill Bit Set
- Three Flats Shank in Orange Case
- High Molybdenum Steel, Gold and Black Oxide. Made in the USA
- See more on Amazon...
Brand: Norseman | Manufacturer: Norseman Viking
Dimensions: 4.00 x 8.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #12
Motorcycle Round Turn Signal Lights, 4PCS 12V LED Bulbs Blinker Direction Indicator Lamp, Universal for Honda Shadow Suzuki Kawasaki Harley Yamaha (Silver/4PCS)
Asin: B0B8146S61 | Model: Lights | PartNumber: Lights | Ean: 0728070059871 | UPC: 728070059871
【Unique Shape & Super Bright】: We Have Adopted A Very Unique Exterior Design, With High Brightness Halogen Bulbs And A Round Lampshade To Make It Look Very Different And Beautiful. This Amber Motorcycle Turn Signal Can Be Used As A Front And Rear Turn Signal For Your Front And Rear Lighting Needs. It Illuminates Brighter Than Other Bulbs, Greatly Improving Visibility And Making Your Driving Safer..
【Package Includes】: You Will Get 4 Motorcycle Turn Signals, Which Will Be Enough For Your Needs. We Will Try Our Best To Provide Customer Good Quality At Great Cost And Create You A More Enjoyable Driving Experience. If You Have Any Questions, Please Feel Free To Contact Us, We Will Reply As Soon As Possible..
【Quick Installation】: Two Installation Methods. If Your Original Blinkers' Mounting Bolt Is 10Mm, Just Remove Your Stock Turn Signal Light And Install The New Light On Where The Old One Was Removed. Or Drill An 10Mm Hole On Where You To Mount The New Turn Signals To Diy Your Motorcycle..
【Top Material】: Our Motorcycle Turn Signals Are Made Of High Quality Steel And Abs Housing. The Delicate Chrome Finish Makes It Look Very Fine And Makes Your Car More Beautiful. The Ip67 Waterproof Plastic Is Very Resistant To Damage And Can Work Even When Traveling In Heavy Rain..
Features
- Compatibility : Universal fit most street standard custom bike cruiser bobber chopper scooter dirt bike with 10mm mounting bolt. Such as compatible with Honda Rebel / Interstate / Fury / Shadow (NOTE: NOT fit Honda Magna,1980-1990 Honda Shadow!!!), Harley, Kawasaki, Suzuki, Yamaha, Triumph and other brands 12V motorbikes.
- Top Material : Our motorcycle turn signals are made of high quality steel and ABS housing. The delicate chrome finish makes it look very fine and makes your car more beautiful. The IP67 waterproof plastic is very resistant to damage and can work even when traveling in heavy rain.
- Unique Shape & Super Bright : We have adopted a very unique exterior design, with high brightness halogen bulbs and a round lampshade to make it look very different and beautiful. This amber motorcycle turn signal can be used as a front and rear turn signal for your front and rear lighting needs. It illuminates brighter than other bulbs, greatly improving visibility and making your driving safer.
- Quick Installation : Two installation methods. If your original blinkers' mounting bolt is 10mm, just remove your stock turn signal light and install the new light on where the old one was removed. Or drill an 10mm hole on where you to mount the new turn signals to DIY your motorcycle.
- Package Includes : You will get 4 motorcycle turn signals, which will be enough for your needs. We will try our best to provide customer good quality at great cost and create you a more enjoyable driving experience. If you have any questions, please feel free to contact us, we will reply as soon as possible.
- See more on Amazon...
Brand: HIPOPY | Manufacturer: HIPOPY
Weight: 0.02 Pounds
See On Amazon #13
bylikeho UTV Wiper,UTV Windshield Wiper Kit,Car Accessories UTV Manual Hand Operated Windshield Wiper Assembly with Instruction,Compatible with Polaris Ranger RZR Can Am Kawasaki Pioneer Golf Cart
Asin: B0CWDJGN3K | Model: 1376SDYGQ001 | PartNumber: 1376SDYGQ001
[Silent Wiping]This Windshield Wiper Adopts A Flexible Soft Layer Design To Reduce Noise And Achieve Silent Wiping. Improved Airflow Aerodynamics Without Rusting Or Creaking..
[Applicable] Suitable For Most Utvs, Golf Carts, Agricultural Vehicles, Tricycles, And Tractors, Hard Coated Polycarbonate Windshields Or Glass Windshields. Please Note That Before Installation, You Must Drill A 1/2 "Hole On The Windshield To Install..
[Product Size] 16 "Rubber Blade, 18" From The Center Of The Handle To The End Of Most Sxs Wipers. Provide One Spare Wiper Blade For Free..
[Function] The Utv Manual Wiper Can Remove Water Droplets, Helping To Maintain A Clear View Of The Road Ahead In The Event Of Mud Splashing Or Starting Rain, And Increasing Safety While Driving..
Features
- [High Quality Materials]Our UTV manual windshield wipers are made of high-quality materials, clean, silent, and durable.
- [Function] The UTV manual wiper can remove water droplets, helping to maintain a clear view of the road ahead in the event of mud splashing or starting rain, and increasing safety while driving.
- [Silent Wiping]This windshield wiper adopts a flexible soft layer design to reduce noise and achieve silent wiping. Improved airflow aerodynamics without rusting or creaking.
- [Product Size] 16 rubber blade, 18 from the center of the handle to the end of most SxS wipers. Provide one spare wiper blade for free.
- [Applicable] Suitable for most UTVs, golf carts, agricultural vehicles, tricycles, and tractors, hard coated polycarbonate windshields or glass windshields. Please note that before installation, you must drill a 1/2 hole on the windshield to install.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #14
Hirificing 10 Set Car Floor Mat Clips Carpet Fixation Clamps Retainers, Automotive Floor Mats Securing Set, Car Rotating Foot Rest Lock Clips for Car Truck SUV RV Van
Asin: B0CRNBLK3Y | Model: Hirificing-DJ01 | PartNumber: Hirificing-DJ01
【Easy To Install】These Carpet Fixation Clamps Retainers Are Very Easy To Install, Just Drill A Small Hole In The Carpet, Put The Nut Assembly Into The Hole, Then Install The Nut Assembly And Cover Assembly In Sequence, And Press Firmly. These Clips Are Not Suitable For Rubber Floor Mats..
【Sufficient Quantity】Our Floor Mat Retainers Are 100% Brand New High-Quality Replacements, With A Total Of Ten Sets Of Car Carpet Fasteners To Meet Your Daily Use Needs And Provide A Safe Driving Environment For You And Your Family..
【Widely Applicable】Our Automotive Floor Mats Securing Sets Are 1.4 Inches In Diameter And The Fastening Cover Height Of 0.24 Inches, Suitable For Use With 0.2 Inch Thick Car Carpets, And Can Be Used On Most Models On The Market, Such As Cars, Trucks, Suvs, Rvs, Vans, And More..
【High Quality】These Floor Mat Fixation Clips Are Made Of High-Quality Nylon Material, Which Is Lightweight And Not Easy To Break, Strong And Wear-Resistant, Waterproof And Does Not Fade, And Has A Long Service Life..
Features
- Fixed Function Our car floor mat clips can effectively secure carpet floor mats in place, prevent the carpet from swinging and prevent the floor mats from slipping during use, providing a safe driving environment for car passengers.
- High Quality These floor mat fixation clips are made of high-quality nylon material, which is lightweight and not easy to break, strong and wear-resistant, waterproof and does not fade, and has a long service life.
- Easy to Install These carpet fixation clamps retainers are very easy to install, just drill a small hole in the carpet, put the nut assembly into the hole, then install the nut assembly and cover assembly in sequence, and press firmly. These clips are not suitable for rubber floor mats.
- Widely Applicable Our automotive floor mats securing sets are 1.4 inches in diameter and the fastening cover height of 0.24 inches, suitable for use with 0.2 inch thick car carpets, and can be used on most models on the market, such as cars, trucks, SUVs, RVs, vans, and more.
- Sufficient Quantity Our floor mat retainers are 100% brand new high-quality replacements, with a total of ten sets of car carpet fasteners to meet your daily use needs and provide a safe driving environment for you and your family.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Dimensions: 0.86 x 1.44 x 1.44 Inches
See On Amazon #15
Zlirfy 4 Pack Rivets Fastener Push Clips,Bumper Fastener Rivet Clips,Bumper Plugs Front License Plate Holes Cover Clips,Bumper Shield Fender Liner Push Pin Retainer Clips,Bumper Plugs
Asin: B0CBPFX6R6 | Model: 686NLDCKK001 | PartNumber: 686NLDCKK001
[Other Names] Bumper Cover Retainer, Radiator Air Upper Baffle Retainer, Front Fender Retainer..
[Function] The Bumper Plug Front License Plate Hole Cover Clip Is Suitable For Most German Cars, Japanese Cars, And American Cars, And Can Play A Role In Blocking Loopholes. You Can Use These To Block The Two Bumper Holes When Removing The Front License Plate..
[Easy To Install] Rivet Fasteners Are Easy To Install, Using A 1/4 Inch Drill Bit To Make The Two Holes Slightly Larger, So That These Plugs Fit Perfectly..
[Specification] Cover Diameter: 0.7Inch. Valve Stem Length: 0.8 Inches. Fill Hole: 25 Inches..
Features
- [High Quality] The front license plate hole cover clip of the bumper plug is made of high-quality nylon material, which is sturdy and durable, not easy to break, wear-resistant and anti-corrosion, and has a long service life.
- [Specification] Cover diameter: 0.7inch. Valve stem length: 0.8 inches. Fill hole: 25 inches.
- [Other Names] Bumper cover retainer, radiator air upper baffle retainer, front fender retainer.
- [Easy to Install] Rivet fasteners are easy to install, using a 1/4 inch drill bit to make the two holes slightly larger, so that these plugs fit perfectly.
- [Function] The bumper plug front license plate hole cover clip is suitable for most German cars, Japanese cars, and American cars, and can play a role in blocking loopholes. You can use these to block the two bumper holes when removing the front license plate.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
Warranty: no
See On Amazon #16
bylikeho License Plate Screws,Car Accessories Automotive Exterior Accessories Black License Plate Screws License Plate Bolts Kit,License Plate Fasteners with Nylon Screw Inserts,Fits Cars,SUVs,Trucks
Asin: B0CX4J3R6R | Model: 1414CPLS001 | PartNumber: 1414CPLS001
[Function] The License Plate Screw Kit For Front And Rear License Plates Is Used To Help Secure The Rear Metal Plate Of The Car. It Can Perfectly Replace Loose Or Damaged License Plate Screws, Personalize Your License Plate, And Achieve A Perfect Appearance..
[Applicable] Our License Plate Fasteners Are Standard Size 1/4 "Diameter X 3/4" Long Self Tapping Screws, Suitable For Most Vehicles Using Nylon/Plastic Screw Fasteners. From Sedans To Suvs, From Motorcycles To Rvs. Metal Threaded Holes Require Different Types Of Screws, So We Recommend Checking The Compatibility Of Vehicle Applications..
[Easy To Install]These License Plate Bolts Are Easy To Install, Just Use A Simple Screwdriver To Install These License Plate Fasteners Onto Your Vehicle. No Special Tools Or Tedious Drill Bits Are Required. This License Plate Screw Kit Is An Ideal Choice For First-Time Car Buyers And Experienced Drivers..
[High Quality Materials]The Universal License Plate Screws Are Made Of High-Quality Stainless Steel With A Smooth, Unpainted Black Finish, Which Will Not Crack Or Peel Off. They Have Rust Prevention Protection And Salt Water Resistance. The Screw Inserts Are Made Of High-Quality Nylon, Which Is Durable And Has A Long Service Life..
Features
- [Set Includes]The set includes 8 license plate screws and 8 nylon screw inserts, making it easy to secure your license plate with this complete original equipment style fastener kit.
- [High Quality Materials]The universal license plate screws are made of high-quality stainless steel with a smooth, unpainted black finish, which will not crack or peel off. They have rust prevention protection and salt water resistance. The screw inserts are made of high-quality nylon, which is durable and has a long service life.
- [Function] The license plate screw kit for front and rear license plates is used to help secure the rear metal plate of the car. It can perfectly replace loose or damaged license plate screws, personalize your license plate, and achieve a perfect appearance.
- [Easy to Install]These license plate bolts are easy to install, just use a simple screwdriver to install these license plate fasteners onto your vehicle. No special tools or tedious drill bits are required. This license plate screw kit is an ideal choice for first-time car buyers and experienced drivers.
- [Applicable] Our license plate fasteners are standard size 1/4 diameter x 3/4 long self tapping screws, suitable for most vehicles using nylon/plastic screw fasteners. From sedans to SUVs, from motorcycles to RVs. Metal threaded holes require different types of screws, so we recommend checking the compatibility of vehicle applications.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Dimensions: 0.39 x 0.39 x 0.39 Inches
See On Amazon #17
Fluher 1 PC Car Shark Fin Antenna, Radio Signal Enhancement Antenna Roof Spoiler Reduce Wind Resistance Decoration, Adhesive Base with Copper Screw, Universal External Antenna (Carbon Fiber Black)
Asin: B0CP3BJ6JT | Model: FLUSYQ01CBPCS | PartNumber: FLUSYQ01CBPCS
Unique Appearance: The Shark Fin Antenna Has A Unique Shape, Harmoniously Matched, And The Smooth Body Shape Is More Perfect. Combining Aerodynamic Principles And Aesthetic Principles, It Overcomes Air Resistance, Effectively Reduces Airflow Noise, And Drives Quieter..
Pasting Using: The Packaging Accessories Come With Strong Double-Sided Tape, No Need To Drill Holes, Stick It To The Back Of The Shark Fin Antenna. Detach The Original Car Antenna, Tear Off The Double-Sided Tape, Install The Shark Fin, Tighten The Screws, And Press Firmly After Alignment..
Product Specifications: You Will Receive 1 X Carbon Fiber Black Shark Fin Antenna, Measuring 6.7" X 3" X 2.5". The Curved Mounting Opening On The Bottom Measures 3.9" X 2.4". The Carbon Fiber Texture Is Delicate And More Advanced. There Is No Need To Detach The Antenna When Washing Cars Automatically Or Entering Places With Limited Space, Saving Time And Worry..
Enhanced Signal: The Pure Copper Wire At The Bottom And The Chip Are Manually Connected In Series, Which Is Not Easy To Disconnect And The Signal Is More Stable. It Can Enhance The Car's Radio Signal And Reduce Shielding Signals. It Has Powerful Functions And Can Be Compatible With Fm, Gps, Gsm And Other Functions At The Same Time Without Affecting The Use..
Features
- Exquisite Craftsmanship: This shark fin antenna is made of ABS plastic, which is durable, has excellent stability and is not easy to break. The surface has gone through the piano paint process, and the paint surface is fine, uniform, reflective, and of higher grade. It is not easy to fade when exposed to the outside for a long time and maintains good texture.
- Enhanced Signal: The pure copper wire at the bottom and the chip are manually connected in series, which is not easy to disconnect and the signal is more stable. It can enhance the car's radio signal and reduce shielding signals. It has powerful functions and can be compatible with FM, GPS, GSM and other functions at the same time without affecting the use.
- Unique Appearance: The shark fin antenna has a unique shape, harmoniously matched, and the smooth body shape is more perfect. Combining aerodynamic principles and aesthetic principles, it overcomes air resistance, effectively reduces airflow noise, and drives quieter.
- Product Specifications: You will receive 1 x carbon fiber black shark fin antenna, measuring 6.7 x 3 x 2.5. The curved mounting opening on the bottom measures 3.9 x 2.4. The carbon fiber texture is delicate and more advanced. There is no need to detach the antenna when washing cars automatically or entering places with limited space, saving time and worry.
- Pasting Using: The packaging accessories come with strong double-sided tape, no need to drill holes, stick it to the back of the shark fin antenna. Detach the original car antenna, tear off the double-sided tape, install the shark fin, tighten the screws, and press firmly after alignment.
- See more on Amazon...
Brand: Fluher | Manufacturer: Fluher
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon #18
Viking Drill and Tool 96060 / 96050 Norseman Ultra Lube Metal Cutting Lubricant (1 Pack), 4 oz
Asin: B075PZQMC1 | Ean: 0050728960506 | UPC: 050728960506
Brand: Viking Drill & Tool
Weight: 0.25 pounds
See On Amazon #19
Viking Drill and Tool by Norseman 57580 SP-18TD Type 20-UB Spiral Point Plug Style Magnum Super Premium Tap/Drill Set
Asin: B0036YY81E | Model: 57580 | PartNumber: 57580 | Ean: 0050728575809 | UPC: 050728575809
Contains: #36, 29, 25, 21, 7, F, 5/16, U, 27/64, 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13.
Spiral Point Gold Oxide Plug Style.
Set Includes Tap And Corresponding Drill Bit.
Spiral Point Nc Tap & Drill Set.
Features
- 18 pc. Tap and Drill Set Premium High Speed Steel Spiral Point, NC
- Spiral Point NC Tap & Drill Set
- Contains: #36, 29, 25, 21, 7, F, 5/16, U, 27/64, 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13
- Set includes tap and corresponding drill bit
- Spiral Point Gold Oxide Plug Style
- See more on Amazon...
Brand: Norseman | Manufacturer: Viking
Dimensions: 1.31 x 7.25 x 4.25 Inches | Weight: 1.53 pounds
See On Amazon #20
Gseigvee 2 PCS Car Brake Pedal, Non-Slip Accelerator Pedal Kit, Aluminum Alloy Pedal Replacement, Vehicle Interior Decoration, Foot Pedal Protection Parts, Universal for Most Cars, Trucks (Blue)
Asin: B0CQ7S8VBT | Model: GSJTB2001BE-2PCS | PartNumber: GSJTB2001BE-2PCS
Function: The Anti-Slip Design On The Pedal Can Enhance The Friction Coefficient Between The Foot And The Pedal, And It Is Designed To Improve Pedal Stability And Control. When Driving For Long Periods Of Time, It Can Help Reduce Tension And Fatigue On Your Feet, Which Makes Driving Easier..
What’S Included In The Package: The Package Contains 2 Pieces Of Car Pedals. When Driving In Rainy Days, It Can Filter Out Muddy Water From The Soles Of Your Feet. This Product Can Fit Your Feet To Improve Driving Safety, Which Allows You To Enjoy Your Journey Better..
Easy Installation: This Pedal Is Easy To Install And The Installation Process Only Takes A Few Minutes To Complete. The Kit Includes The Necessary Bolt Hardware That You Can Use To Secure It To Your Original Pedals Using The Included Screw Set. Note: If Parts Are Still Loose After Installation, They Must Be Reinstalled..
Product Design: Anti-Slip Raised Rings Are Added To The Surface Of The Car Pedal, Which Are Concentrated In The High-Frequency Pedal Area To Provide Excellent Anti-Skid Performance. This Product Provides You With Firm Support And Better Control, It Will Give You More Comfort And Peace Of Mind While Driving..
Features
- Material: The pedal cover is made of aluminum alloy material. This product has fine workmanship, is not easy to break and deform, and can be used for a long time. This car pedal effectively protects the accelerator and brake to ensure your driving safety.
- Product Design: Anti-slip raised rings are added to the surface of the car pedal, which are concentrated in the high-frequency pedal area to provide excellent anti-skid performance. This product provides you with firm support and better control, it will give you more comfort and peace of mind while driving.
- Function: The anti-slip design on the pedal can enhance the friction coefficient between the foot and the pedal, and it is designed to improve pedal stability and control. When driving for long periods of time, it can help reduce tension and fatigue on your feet, which makes driving easier.
- Easy Installation: This pedal is easy to install and the installation process only takes a few minutes to complete. The kit includes the necessary bolt hardware that you can use to secure it to your original pedals using the included screw set. Note: If parts are still loose after installation, they must be reinstalled.
- What s Included in The Package: The package contains 2 pieces of car pedals. When driving in rainy days, it can filter out muddy water from the soles of your feet. This product can fit your feet to improve driving safety, Which allows you to enjoy your journey better.
- See more on Amazon...
Brand: Gseigvee | Manufacturer: Gseigvee
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon
Looking For Something Else?
Search