SmallRig Full Camera Cage for Sony Alpha 7R V/Alpha 7 IV / A7R IV/Alpha 7 S III/Alpha 1-3667B
Asin: B09P7XQ32T | Model: 3667-SR | PartNumber: 3667-SR
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Multiple Mounting Points: The Cage Has Multiple 1/4"-20 Holes And 3/8"-16 Positioning Holes For Arri, Which Can Attach Accessories Such As The Upper Handle 3765, The Side Handle 2093, And The Monitor Stand 2903B. There Are 2 Built-In Cold Shoe Interfaces, Which Can Install Microphones, Fill Lights And Other Equipment; The Qd Hole At The Bottom Is Compatible With Qd Shoulder Straps. Holes Are Reserved On Both Sides And Bottom Of The Cage To Attach Wrist Strap Pac2456 And Shoulder Strap Psc2428..
Power Backup Solution: Smallrig Np-Fz100 Camera Battery Charger Set Is Available Now, Two 2040Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fz100 Battery 3824(Asin:B09z6trbh8)..
All-Round Protection: Built-In All-Round Rubber Gasket To Prevent Scratches. With The Cage Installed, The Camera Interface, Dials, Buttons And Changing Batteries Are Not Affected. The Opening And Closing Wrench Design Is Added To The Position Of The Battery Compartment, Which Fits The Curve Of The Fuselage More, Solves The Problem Of Placing The Little Finger, And Enhances The Grip Of The Fuselage..
Built-In Quick Release Plate: The Bottom Quick Release Plate For Arca Has Added 1/4"-20 Holes With A Spacing Of 18Mm, Which Is Compatible For Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro, And Can Also Be Adapted To Dji Rs 2 / Rsc 2 Stabilizer Mounting Board (Riser Plate) And Smallrig Quick Release Plate For Arca 3154..
Three-Point Locking: A Positioning Pin Is Added At The Bottom Of The Cage, And The 1/4"-20 Screw And The Left M2.5 Screw Form A Three-Point Locking To Make The Camera Stable. Adjust The Direction Of The Left Locking Slider To Adapt To Different Models, [A7 Iv] Side Is Suitable For Alpha 7 Iv And Alpha 7R V, [A7s Iii/A1] Side Is Suitable For Alpha 7S Iii / Alpha 1 / Alpha 7R Iv.
For Sony A7r V/A7 Iv/A7s Iii/A1/A7r Iv: Smallrig Cage 3667 Is Designed For Sony A7r V, A7 Iv, A7s Iii, A1, A7r Iv To Facilitate Low-Angle Shots And Protect The Camera While Offering A Wide Range Of Accessory Mounts. Note: The Cable Clamp For Hdmi 3000 Is Not Compatible With Alpha 1 And Alpha 7R Iv Because It Will Block The Synchro Terminal Interface When Used On The Alpha 7R V..
Features
- Improved Design: 1. A cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as Microphone 3468 and LED Video light 3286; 2. Two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with SmallRig Quick Release Plate for Arca 3154. A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories.
- For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The Cable Clamp for HDMI 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V.
- Multiple Mounting Points: The cage has multiple 1/4-20 holes and 3/8-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment; the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428.
- Three-Point Locking: A positioning pin is added at the bottom of the cage, and the 1/4-20 screw and the left M2.5 screw form a three-point locking to make the camera stable. Adjust the direction of the left locking slider to adapt to different models, [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, [A7S III/A1] side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IV
- All-Round Protection: Built-in all-round rubber gasket to prevent scratches. With the cage installed, the camera interface, dials, buttons and changing batteries are not affected. The opening and closing wrench design is added to the position of the battery compartment, which fits the curve of the fuselage more, solves the problem of placing the little finger, and enhances the grip of the fuselage.
- Built-in Quick Release Plate: The bottom quick release plate for Arca has added 1/4-20 holes with a spacing of 18mm, which is compatible for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, and can also be adapted to DJI RS 2 / RSC 2 stabilizer mounting board (riser plate) and SmallRig Quick Release Plate for Arca 3154.
- Power Backup Solution: SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824(Asin:B09Z6TRBH8).
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 4.24 x 5.75 x 2.54 inches | Weight: 0.40 pounds
See On Amazon Similar To SmallRig Full Camera Cage for
#1
SMALLRIG Field Monitor Mount Monitor Holder Swivel and Tilt Adjustable with Cold Shoe Mount for 5" and 7" Monitor - 2905
Asin: B08LMSXVXK | Model: 2905-AU | PartNumber: 2905-AU | Ean: 6941590001555
Anti-Twist Design: The Camera Monitor Holder Bulid In Bouncy Locating Pins On The Top To Futher Secure Ninja V/ V+, And Silicone Pad To Prevent The Monitor From Scratching And Twisting.
Note: Different Tilt Angle Has Different Load Capcaity, 90° Load Capacity＜9.3 Lbs; 45° Tilt Load Capacity＜5.5 Lbs, 30° Tilt Load Capacity＜5 Lbs. For The Safety, Please Do Use The Allen Wrench To Re-Tighten The 1/4'' Knurled Screw For Further Security.
Wide Compatibility: Features Cold Shoe Adapter At The Bottom To Connect Camera Cage, 1/4"-20 Threaded Hole For Magic Arm Or Stabilizer. 1/4"-20 Screw On The Top Support Monitor, Microphone, Light, Etc.
Upgraded Version: Smallrig 2905B Is An Upgraded Version Monitor Mount. It Is Designed To Support 5” And 7” Camera Monitors Via Cold Shoe On Top Of Camera Cages Or Handles.
Features
- Upgraded Version: SMALLRIG 2905B is an upgraded version monitor mount. It is designed to support 5 and 7 camera monitors via cold shoe on top of camera cages or handles
- Upgraded Version: SMALLRIG 2905B is an upgraded version monitor mount. It is designed to support 5 and 7 camera monitors via cold shoe on top of camera cages or handles
- Anti-Twist Design: The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting
- Wide Compatibility: Features cold shoe adapter at the bottom to connect camera cage, 1/4-20 threaded hole for magic arm or stabilizer. 1/4-20 screw on the top support monitor, microphone, light, etc
- Note: Different tilt angle has different load capcaity, 90 load capacity 9.3 lbs; 45 tilt load capacity 5.5 lbs, 30 tilt load capacity 5 lbs. For the safety, please do use the Allen Wrench to re-tighten the 1/4'' knurled screw for further security
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.18 x 1.65 x 1.87 inches | Weight: 0.17 pounds
See On Amazon #2
SmallRig Cold Shoe Mount (2pcs Pack) with 1/4"-20 Thread for Camera Cage Flash LED Monitor Microphone - 2060
Asin: B075M528JB | Model: 2060-AU | PartNumber: 2060-AU | Ean: 6972070624568
【Easy To Use】Secure Tightly Via The Two M2.5 Screws, And A 1/4" Thread Hole For You To Attach To The Camera Cage, Plate, Handles, Or Other Accessories..
【Product Information】Package Included: 2 X 1/4"-20 Screw; 4 X M2.5 Screws; 2 X Hex Spanner, 2 X Cold Shoe Mount. Diameter: 25Mm X 25Mm/ 0.98"X0.98"; Material: Aluminum Alloy..
【Note】This Cold Shoe Mount Is Not Suitable For Dji Gimbal And Not For Zhiyun As Well. For Use On A Cage, Except For Smallrig Full Cage 1661, You Only Need To Lock It On The Cage Via The Included 1/4"-20 Screw, The M2.5 Threaded Is Unnecessary..
【Sweet Ant-Off Design】We Specially Offer Two White Arrows On The Surface To Show The Mounting Ways For Your Convenience. It Comes With Two Secure Bending Bevels On One End To Prevent Accidental Removal..
【Wide Application】This Shoe Adapter Allows You To Attach A Microphone, Flash, Or Led, On Accessories Of Cameras Such As Handles, Cages, Etc. Perfectly Fit For All The Accessories With 1/4"-20 Threaded Holes..
Features
- Standard Shoe Adapter Compatible could be mounted on any camera accessories with 1/4" or M2.5 threaded holes, such as cage, cold shoe block, handle, plate, etc. Compatible with Cage for Sony ZV-E10, Such as Cage for Sony (a6500 a6300 a6700), etc.
- Wide Application This shoe adapter allows you to attach a Microphone, Flash, or LED, on accessories of cameras such as handles, cages, etc. Perfectly fit for all the accessories with 1/4-20 threaded holes.
- Easy to Use Secure tightly via the two M2.5 screws, and a 1/4 thread hole for you to attach to the camera cage, plate, handles, or other accessories.
- Sweet Ant-Off Design We specially offer two white arrows on the surface to show the mounting ways for your convenience. It comes with two secure bending bevels on one end to prevent accidental removal.
- Product Information Package included: 2 x 1/4-20 screw; 4 x M2.5 Screws; 2 x Hex spanner, 2 x Cold Shoe Mount. Diameter: 25mm x 25mm/ 0.98x0.98; Material: Aluminum Alloy.
- NOTE This Cold Shoe Mount is NOT suitable for DJI gimbal and NOT for ZHIYUN as well. For use on a cage, except for SmallRig Full Cage 1661, you only need to lock it on the cage via the included 1/4-20 screw, the M2.5 threaded is unnecessary.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.35 x 0.98 x 0.98 inches | Weight: 0.07 pounds
See On Amazon #3
SMALLRIG ZV-E10 Cage with Silicone Handle and Built-in Threaded Holes, Cold Shoe and Quick Release Plate for Sony ZV-E10-3538
Asin: B09GVH1JC1 | Model: 3538-SR | PartNumber: 3538-SR | Ean: 6941590006376
Multiple Mounting Options: The Cage Has Built-In Multiple 1/4"-20 Threaded Holes, 3/8"-16 Positioning Holes For Arri, Which Can Be Used With The Top Handle 1638, 1446, 1984 And 2165 For Low-Angle Shooting; It Can Also Be Installed With A Power Bank Clip Bub2336 To Fix The Power Bank Near The Camera For Continuous Power Supply. There Is A Built-In Cold Shoe On The Top And Bottom Of The Cage, Which Can Expand The Microphone 3468 And Led Video Light 3286 For A Complete Vlogging Solution..
Quick Release Plate For Arca-Swiss: The Quick Release Plate For Arca-Swiss At The Bottom Attaches Directly To The Tripod For Arca-Swiss Type For Quick Switching Between Handheld, Tripod And Stabilizer Shooting. The Bottom Threaded Holes Are Designed For The Quick Release Plate Of The Rs 3/Rs 3 Pro/Rs 2/Rsc 2 Stabilizer To Improve The Stabilizer Shooting Experience..
Power Backup Solution: Smallrig Np-Fw50 Camera Battery Charger Set Is Available Now, Two 1030Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fw50 Battery 3818.
Silicone Handle With Comfortable Grip: The Cage Has A Built-In Detachable Silicone Handle Designed According To Ergonomics. The Cage Is Fixed By A 1/4"-20 Screw At The Bottom, And The Camera Can Be Double-Fixed With The Included Anti-Deflection Lock To Further Prevent Deflection..
Enlarged Battery Compartment Space: The Space For The Battery Compartment At The Bottom Of The Cage Is Enlarged, Making It Easier For You To Change Memory Cards. The Cage Does Not Interfere With The Use Of Buttons, Card Slots, Battery Compartments, And Flip Screens. There Is A Slot In The Battery Compartment To Place The Dummy Battery Cable. When Using The Dummy Battery, The Camera Can Also Be Placed Flat On The Table..
Features
- Enlarged Hot Shoe Space: The new version of the cage enlarges the space around the camera hot shoe, and now you can use the cage together with the Microphone ECM-W2BT for Sony, Flash HVL-F32M or other accessories that require the use of the hot shoe on the top of the camera.
- Enlarged Battery Compartment Space: The space for the battery compartment at the bottom of the cage is enlarged, making it easier for you to change memory cards. The cage does not interfere with the use of buttons, card slots, battery compartments, and flip screens. There is a slot in the battery compartment to place the dummy battery cable. When using the dummy battery, the camera can also be placed flat on the table.
- Multiple Mounting Options: The cage has built-in multiple 1/4-20 threaded holes, 3/8-16 positioning holes for ARRI, which can be used with the Top Handle 1638, 1446, 1984 and 2165 for low-angle shooting; it can also be installed with a Power Bank Clip BUB2336 to fix the power bank near the camera for continuous power supply. There is a built-in cold shoe on the top and bottom of the cage, which can expand the Microphone 3468 and LED Video Light 3286 for a complete vlogging solution.
- Silicone Handle with Comfortable Grip: The cage has a built-in detachable silicone handle designed according to ergonomics. The cage is fixed by a 1/4-20 screw at the bottom, and the camera can be double-fixed with the included anti-deflection lock to further prevent deflection.
- Quick Release Plate for Arca-Swiss: The quick release plate for Arca-Swiss at the bottom attaches directly to the tripod for Arca-Swiss type for quick switching between handheld, tripod and stabilizer shooting. The bottom threaded holes are designed for the quick release plate of the RS 3/RS 3 Pro/RS 2/RSC 2 stabilizer to improve the stabilizer shooting experience.
- Power Backup Solution: SmallRig NP-FW50 camera battery charger set is available now, two 1030mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FW50 Battery 3818
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.36 x 3.15 x 3.15 Inches | Weight: 0.17 pounds
See On Amazon #4
SmallRig Adjustable Camera Monitor Mount for ARRI-Style (Upgrade), 360 Swivel and 180 Tilt Monitor Holder Anti-Twist Support 5 and 7 Field Monitor- 2903B
Asin: B08JLZHYVC
Quickly Tightened: The Mount Can Tilt 180 Degree And And Swivel 360 Degree, Different With The Old Mode (2903) Using Allen Wrench, This Upgrade Monitor (2903B) Is Quickly Tightened Via A Knob To Suit Different Angle.
High Quality: Made Of Cnc-Machined Aluminum Alloy And Stainless Steel, Sturdy Enough To Support And Protect 5’’ And 7’’ Filed Monitor, Different Tilt Angle Has Different Load Capcaity, 90 Degree<4.2Kg, 45 Degree<2.5Kg, 30 Degree<2.3Kg.
Multiple Threaded Holes: Features Locating Screw For Arri At The Bottom To Connect Camera Cage And 1/4"-20 Threaded Holes For Magic Arm Or Stabilizer. 1/4"-20 Screw On The Top Support Monitor, Microphone, Light, Etc.
Dual Anti-Twist Design: The Camera Monitor Holder Bulid In Bouncy Locating Pins On The Top To Futher Secure Ninja V/ V+, And Silicone Pad To Prevent The Monitor From Scratching And Twisting.
Features
- For 5 and 7 Monitor: SmallRig adjustable monitor mount is designed to support 5 and 7 camera monitors via screw mount for ARRI on the top of camera cage or other mounting system
- Dual Anti-Twist Design: The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting
- Quickly Tightened: The mount can tilt 180 degree and and swivel 360 degree, different with the old mode (2903) using Allen Wrench, this upgrade monitor (2903B) is quickly tightened via a knob to suit different angle
- Multiple Threaded Holes: Features locating screw for ARRI at the bottom to connect camera cage and 1/4-20 threaded holes for magic arm or stabilizer. 1/4-20 screw on the top support monitor, microphone, light, etc
- High Quality: Made of CNC-Machined aluminum alloy and stainless steel, sturdy enough to support and protect 5 and 7 filed monitor, different tilt angle has different load capcaity, 90 degree<4.2kg, 45 degree<2.5kg, 30 degree<2.3kg
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.34 x 1.65 x 1.61 inches | Weight: 0.20 Pounds
See On Amazon #5
SmallRig Camera Screw Set,26 Pcs Screw Set for Camera Accessories AAK2326
Asin: B0854HFVVL | Model: AAK2326-CF-FBA-US | PartNumber: AAK2326-CF-FBA-US | Ean: 6972070629129
【Socket Cap & Slotted & Phillips Screw】26 Screws In Total: 2 X 1/4” Slotted Screw, 8 X 1/4” Socket Cap Screw, 2 X 3/8” Slotted Screw, 4 X M2 Phillips Screw, 2 X M2.5 Socket Cap Screw, 4 X M3 Phillips Screw, 4 X M4 Socket Cap Screw And A Box For Storage.
【Examples Of Use】The M2.5 Screw Can Be Used For Selected Camera Cage Which Locked With M2.5 Screw On The Side. The M3 And M4 Screw Can Be Used For Arri Rosette, Etc.
【Six Types Of Screws】The Box Includes Six Types Of Screw: 1/4”, 3/8”, M2, M2.5, M3, M4 Screws.
【26 Screws In Total】The Box Includes Six Types Of Screw, 26 Screws In Total.
Features
- FOR CAMERA ACCESSORIES SMALLRIG Screw Set for Camera Accessories AAK2326 is designed for camera cages, handles, plates and other camera related accessories
- 26 SCREWS IN TOTAL The box includes six types of screw, 26 screws in total
- SOCKET CAP & SLOTTED & PHILLIPS SCREW 26 screws in total: 2 x 1/4 slotted screw, 8 x 1/4 socket cap screw, 2 x 3/8 slotted screw, 4 x M2 phillips screw, 2 x M2.5 socket cap screw, 4 x M3 phillips screw, 4 x M4 socket cap screw and a box for storage
- SIX TYPES OF SCREWS The box includes six types of screw: 1/4 , 3/8 , M2, M2.5, M3, M4 Screws
- EXAMPLES OF USE The m2.5 screw can be used for selected camera cage which locked with m2.5 screw on the side. The m3 and m4 screw can be used for ARRI rosette, etc
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 0.94 x 3.15 x 2.44 inches | Weight: 0.17 Pounds
See On Amazon #6
SmallRig Cage for Sony FX30 FX3 with Cable Clamp for HDMI, Classic Bright Black Surface, Included Cold Shoe and NATO Rail, Modular Design Compatible with Original XLR Handle - 4183
Asin: B095S7RWVY | Model: 3278-SR | PartNumber: 3278-SR | Ean: 6941590012353
Multiple Mounting Points: The Cage Features 1/4"-20 Holes Fits Magic Arm 3873; The Locating Hole For Arri Suits Top Handle 3765; The Side Nato Rail Can Attach Side Handle 3813; The 1/4”-20 Positioning Holes On The Upper Left Corner And Left Side Can Attach Rod Clamp 3598 For Follow Focus; Two 1/4”-20 Holes On The Side Can Attach Quick Release Plate; Built-In Cold Shoe Can Attach Microphone 3468, Led Video Light 3286B..
Note: 1. The Spacing Between The 1/4" Holes On The Nato Rail Is 27Mm, So It Is Not Compatible With Accessories With A Spacing Of 18Mm. 2. When Using The Original Xlr Handle, Please Remove The Nato Rail First..
Power Backup Solution: Smallrig Np-Fz100 Camera Battery Charger Set Is Available Now, Two 2040Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fz100 Battery 3824(Asin:B09z6trbh8)..
Quick Release Plate For Arca: The Qr Plate At The Bottom Is Compatible For Dji Rs 2, Rsc 2, Rs 3, Rs 3 Pro, Quick Release Plate (Height Increase Pad) And Plate For Arca 3154. The Cage Also Features Strap Holes On Both Sides And The Bottom, Which Are Compatible With Hand Strap 3848, Shoulder Strap Psc2428, Etc. The Bottom Qd Socket To Install Qd Shoulder Strap, And A Magnetic Wrench Is Included For Easy Disassembly And Assembly..
Classic Bright Black Surface: Classic Design Features Bright Black Shape, Bring You A New Sense Of Fashion. The Battery Compartment Is Designed With An Hinge Arm To Fit Camera Curve For Improved Grip Experience For Little Finger. Built-In Rubber Pads Preventing Scratches..
Features
- Designed for Sony FX30 / FX3: The FX30 / FX3 cage features modular design, including a NATO rail module and a U-shaped cage module. The NATO rail is secured on the top via two 1/4"-20 screws and allow connecting the original XLR top handle after disassembly; the U-shaped cage module is fixed via 1/4"-20 screws on both sides and the bottom to prevent twisting. The package comes with a dedicated cable clamp for HDMI to protect the interface and ensure the signal stability during shooting.
- Classic Bright Black Surface: Classic design features bright black shape, bring you a new sense of fashion. The battery compartment is designed with an hinge arm to fit camera curve for improved grip experience for little finger. Built-in rubber pads preventing scratches.
- Multiple Mounting Points: The cage features 1/4-20 holes fits Magic Arm 3873; the locating hole for ARRI suits Top Handle 3765; the side NATO rail can attach Side Handle 3813; the 1/4 -20 positioning holes on the upper left corner and left side can attach Rod Clamp 3598 for follow focus; two 1/4 -20 holes on the side can attach quick release plate; built-in cold shoe can attach Microphone 3468, LED Video Light 3286B.
- Quick Release Plate for Arca: The QR plate at the bottom is compatible for DJI RS 2, RSC 2, RS 3, RS 3 Pro, quick release plate (height increase pad) and plate for Arca 3154. The cage also features strap holes on both sides and the bottom, which are compatible with Hand Strap 3848, Shoulder Strap PSC2428, etc. The bottom QD socket to install QD shoulder strap, and a magnetic wrench is included for easy disassembly and assembly.
- Note: 1. The spacing between the 1/4 holes on the NATO rail is 27mm, so it is not compatible with accessories with a spacing of 18mm. 2. When using the original XLR handle, please remove the NATO rail first.
- Power Backup Solution: SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824(Asin:B09Z6TRBH8).
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 4.65 x 5.43 x 2.32 inches | Weight: 0.43 pounds
See On Amazon #7
SmallRig 1/4" Mini Ball Head Cold Shoe Mount Adapter with 1/4"-20 Thread for Camera Phone Cage LED Video Light-3577
Asin: B09NNCRVNG | Model: 3577 | PartNumber: 3577
Anti-Scratch: Made Of High-Quality Aluminium Alloy Material, The Surface Adopts Anti-Oxidation Treatment, More Stable And Durable. Features An Anti-Scratch Pad On The Top To Protect The Device From Scratch..
Toolless Installation: Come With A Cold Shoe Adapter On The Base, You Can Quickly Attach The Mount To The Camera Or Cage..
Wide Compatibility: With A 1/4" Screw On The Top For Light Or Microphone. With Cold Shoe Adapter On The Base For More Accessories Attachment If Needed. Such As Id: 3290, 3157, 3561, 3611 And So On..
Flexible Positioning: The Aluminium Mount Enables You To Tilt Up To 138° To Position Your Light And Realize Precise Lighting.Note: Mini Mount Support Device Up To 250G..
Features
- Portable and Lightweight: Mini Mount 3577 is designed to hold your light onto the top of the camera, Cage or other mounting systems via a cold shoe adapter. Portable and Lightweight mini shoe holder, Weighing only 20g. If you don't want to put too much weight on the camera, this is a good choice.
- Flexible Positioning: The aluminium mount enables you to tilt up to 138 to position your light and realize precise lighting.NOTE: Mini mount support device up to 250g.
- Anti-scratch: Made of high-quality aluminium alloy material, the surface adopts anti-oxidation treatment, more stable and durable. Features an Anti-scratch pad on the top to protect the device from scratch.
- Wide Compatibility: With a 1/4 screw on the top for light or microphone. With cold shoe adapter on the base for more accessories attachment if needed. Such as ID: 3290, 3157, 3561, 3611 and so on.
- Toolless installation: Come with a cold shoe adapter on the base, you can quickly attach the mount to the camera or cage.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.02 x 1.30 x 0.94 inches | Weight: 0.04 pounds
See On Amazon #8
SmallRig x Brandon Li Mobile Video Kit for iPhone 15 Pro Max with Wireless Quick Release Handles, 52MM Magnetic VND Filter, 52MM Filter Adapter, Phone Rig for YouTube/Video Recording/Vlog - 4407
Asin: B0CMTRG737
【With 52Mm Magnetic Vnd Filter And Filter Adapter】The Mobile Video Kit 4407 Is Equipped With A Magnetic 52Mm Vnd Filter Nd2-Nd32 (5 Stop) And A 52Mm Filter Ring, Which Can Make The Image Smoother And More Cinematic. Balance Exposure Times By Rotating The Outer Polarizer To Reduce The Amount Of Light When Shooting Rivers, Waterfalls, Traffics, Etc..
【No Impact On Mobile Phone Use】The Phone Video Cage Kit Features Hollow Design To Maintain Access To All Buttons, Ports, Radar And Ultra-Wide-Angle Lens, And Is Fully Compatible For Magsafe Wireless Chargers. It Will Not Affect The Normal Use Of The Mobile Phone..
【What Can You Get】The Package Include 1 X Signed Cage 4473, 1 X Signed Wireless Control Quick Release Side Handle 4402, 1 X Quick Release Side Handle 4403, 1 X 52Mm Magnetic Vnd Filter 4215, 1 X Magnetic Filter Ring Adapter 3840C, 3 X Spare Screw And Professional After-Sales Service. If You Have Any Questions, Please Feel Free To Contact Us..
【New Quick-Release Ecosystem】Smallrig X Brandon Li Co-Design Phone Cage And Handles Adopt New Smallrig Quick-Release Ecosystem For Easy And Instant Switch Between Shooting In Horizontal And Vertical Orientations. Smalrig Phone Cage Features Multiple 1/4"-20 Threaded Holes And Two Cold Shoes To Attach Handle, Tripod But2664, Microphone 3468, Led Video Light 3286, Etc..
【Dual Handheld Design】Smallrig Phone Video Kit 4407 Is Specially Designed For Iphone 15 Pro Max, It Features Two Phone Handles For Stable Videoing And Vlogging, The Wireless Control Side Handle For Efficient “One-Click”Shooting..
Features
- SmallRig x Brandon Li Co-design Edition In September 2023, SmallRig and Brandon Li jointly created the phone cage kit for iPhone 15 Pro Max. The desert oasis gradient color and manufacturing process, as well as Brandon Li's exclusive signature, give the product a unique sense of exclusiveness.
- Dual Handheld Design SmallRig phone video kit 4407 is specially designed for iPhone 15 Pro Max, it features two phone handles for stable videoing and vlogging, the wireless control side handle for efficient one-click shooting.
- With 52MM Magnetic VND Filter and Filter Adapter The mobile video kit 4407 is equipped with a magnetic 52mm VND Filter ND2-ND32 (5 Stop) and a 52mm filter ring, which can make the image smoother and more cinematic. Balance exposure times by rotating the outer polarizer to reduce the amount of light when shooting rivers, waterfalls, traffics, etc.
- New Quick-release Ecosystem SmallRig x Brandon Li Co-design phone cage and handles adopt new SmallRig quick-release ecosystem for easy and instant switch between shooting in horizontal and vertical orientations. SmalRig phone cage features multiple 1/4-20 threaded holes and two cold shoes to attach handle, tripod BUT2664, microphone 3468, LED video light 3286, etc.
- No Impact on Mobile Phone Use The phone video cage kit features hollow design to maintain access to all buttons, ports, radar and ultra-wide-angle lens, and is fully compatible for MagSafe wireless chargers. It will not affect the normal use of the mobile phone.
- What Can You Get The package include 1 x Signed Cage 4473, 1 x Signed Wireless Control Quick Release Side Handle 4402, 1 x Quick Release Side Handle 4403, 1 x 52mm Magnetic VND Filter 4215, 1 x Magnetic Filter Ring Adapter 3840C, 3 x Spare Screw and professional after-sales service. If you have any questions, please feel free to contact us.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Weight: 1.57 pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #9
SmallRig Cool Ballhead, Multi-Function Double Ball Dead Adapter with Shoe Mount & 1/4" Screw for Monitors Led Light Microphone - 1135
Asin: B00DA38C3G | Model: 4331911719 | PartNumber: 4331911719 | Ean: 0694977330057, 6972070624513 | UPC: 694977330057
【Easy To Lock】The Locking Knob Is Used For Securing And Operating The Ball Head Faster.
【Notice】Not Recommend For Monitor Or Led Light Over 1.0 Kg/2.2 Lbs..
【Comes With Shoe Base】The Ballhead Comes With A Shoe Base, Which Could Mount On A Camera Cage/Handle/Plate, Or Directly On Cameras Such As Or Canon, For Nikon, For Olympus, For Pentax, For Panasonic, For Fujifilm & For Kodak..
【180 Degree Rotation】The Ball Mount Can Be Easily Rotated By 180 Degrees And Secured By The Side Wingnut For A Perfect Viewing Angle.
Features
- Wide Application A universal double ball head with cold shoe and 1/4 screw on both ends, and can be widely used with a monitor/small action camera/LED Lights/microphones/flash when shooting
- 180 Degree Rotation The ball mount can be easily rotated by 180 degrees and secured by the side wingnut for a perfect viewing angle
- Easy to Lock the locking knob is used for securing and operating the ball head faster
- Comes with Shoe Base The ballhead comes with a shoe base, which could mount on a camera cage/handle/plate, or directly on cameras such as or Canon, for Nikon, for Olympus, for Pentax, for Panasonic, for Fujifilm & for Kodak.
- NOTICE not recommend for monitor or LED light over 1.0 kg/2.2 lbs.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 3.90 x 0.94 x 0.94 inches | Weight: 0.20 pounds
See On Amazon #10
SmallRig Cage with Silicone Handgrip & Cold Shoe for Sony a6100, a6300, a6400-3164
Asin: B08VD9BSRX | Model: 3164-SR | PartNumber: 3164-SR
【Secure Lock Points & Prevent Twisting】This Aluminum Alloy Cage 3164 Secures The Camera Via A 1/4"-20 Screw, And A M2.5 Screw On The Side To Prevent Twisting. Plus, An Optional Cable For Hdmi Clamp 1693 Is Separately Available To Protect The Port For Hdmi..
【Built-In Screwdriver】A Built-In Screwdriver Stores On The 3164 Cage Bottom For Quick Assembly And Disassembly. Also, The Mounting Surface Features Rubber Pads That Hold Your Camera Securely To Prevent Scratching..
【Power Backup Solution】Smallrig Np-Fw50 Camera Battery Charger Set Is Available Now, Two 1030Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fw50 Battery 3818.
【Integrated Plate For Arca-Style】There Is An Integrated Plate For Arca-Type On The Cage Bottom, And It Allows You To Mount Quickly On A Tripod For Arca Standard..
【Multiple Mounting Points】The Smallrig Cage With Silicone Handle 3164 Features Two Cold Shoes, Multiple 1/4"-20 Threaded Holes And For Arri 3/8"-16 Locating Holes For Attaching The Articulating Arms, External Monitors, Microphones Or Other Accessories..
Features
- FOR SONY A6400/A6300/A6100 The SmallRig Camera Cage 3164 is especially designed for Sony cameras a6400/a6300/a6100 with a removable, non-slip and soft silicone handgrip.
- MULTIPLE MOUNTING POINTS The SmallRig Cage with Silicone Handle 3164 features two cold shoes, multiple 1/4-20 threaded holes and for ARRI 3/8-16 locating holes for attaching the articulating arms, external monitors, microphones or other accessories.
- SECURE LOCK POINTS & PREVENT TWISTING This aluminum alloy cage 3164 secures the camera via a 1/4-20 screw, and a M2.5 screw on the side to prevent twisting. Plus, an optional Cable for HDMI Clamp 1693 is separately available to protect the port for HDMI.
- INTEGRATED PLATE FOR ARCA-STYLE There is an integrated plate for Arca-Type on the cage bottom, and it allows you to mount quickly on a tripod for Arca standard.
- BUILT-IN SCREWDRIVER A built-in screwdriver stores on the 3164 cage bottom for quick assembly and disassembly. Also, the mounting surface features rubber pads that hold your camera securely to prevent scratching.
- Power Backup Solution SmallRig NP-FW50 camera battery charger set is available now, two 1030mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FW50 Battery 3818
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.60 x 5.39 x 3.35 inches | Weight: 0.43 Pounds
See On Amazon #11
SMALLRIG Ultra Slim 4K Adapter Cable (D to A), Micro-Sized Ports Male to Full-Sized Ports Female, 4K@60HZ, for Sony A7R IV A7RIII A7III A7II A7RII / for Fujifilm X-T2 X-T3-3021
Asin: B08QVBJBP3 | Model: 3021-US | PartNumber: 3021-US
【Ultra-Slim Cable For Up To 4K@60Hz Video】It’S Ultra-Slim 2.0 Version And Supports Resolution Up To 4K@60Hz And Will Be Backward Compatible. The Adapter Cable Features A Female Type A Connector On One End And A Male Micro Type D Connector On The Other End To Fit A Variety Of Cameras..
【Flexible Pvc Cable】This Flexible, Ultra-Slim Pvc Cable Measures 141.1Mm/5.6" In Length. Note: Please Make Sure The Port On Your Camera Is A Micro-Sized Ports..
【Wide Compatibility】Smallrig 3021 Is Compatible With Cameras With Micro-Sized Ports, Like For Sony A7r Iv, A7riii, A7iii, A7ii, A7rii, Or For Fujifilm X-T2, X-T3, Etc. Besides, It Can Be Used For Camera Cages Or L Brackets With No Less Than Two 1/4"-20 Thread Holes (9Mm Distance From Center To Center) On The Left Side, Like Ccs2416, 2238, 2228, 2229, Etc..
【2 X 1/4"-20 Threads On Female End】The Female End Of The Adapter Cable Features Two 1/4"-20 Threads To Attach To A Cage, Bracket, Or Rig, And The Threads Measure 0.35" Apart From Center-To-Center. Two Screws Are Included To Mount The Adapter Onto Your Rig..
Features
- ADAPTER CABLE (D TO A) SmallRig Ultra Slim 4K Adapter Cable (D to A) 3021 is a high-quality adapter cable (Micro Male to Full Female) for your camera setup. You can use an Type A cable with your camera cage or rig with this adapter cable.
- 2 X 1/4-20 THREADS ON FEMALE END The female end of the adapter cable features two 1/4-20 threads to attach to a cage, bracket, or rig, and the threads measure 0.35 apart from center-to-center. Two screws are included to mount the adapter onto your rig.
- ULTRA-SLIM CABLE FOR UP TO 4K@60HZ VIDEO It s ultra-slim 2.0 version and supports resolution up to 4K@60HZ and will be backward compatible. The adapter cable features a female Type A connector on one end and a male Micro Type D connector on the other end to fit a variety of cameras.
- WIDE COMPATIBILITY SmallRig 3021 is compatible with cameras with Micro-sized ports, like for Sony A7R IV, A7RIII, A7III, A7II, A7RII, or for Fujifilm X-T2, X-T3, etc. Besides, it can be used for camera cages or L brackets with no less than two 1/4-20 thread holes (9mm distance from center to center) on the left side, like CCS2416, 2238, 2228, 2229, etc.
- FLEXIBLE PVC CABLE This flexible, ultra-slim PVC cable measures 141.1mm/5.6 in length. Note: Please make sure the port on your camera is a Micro-Sized Ports.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.46 x 5.56 x 1.31 inches | Weight: 0.07 pounds
See On Amazon #12
SMALLRIG Micro Ultra Thin HDMI Cable 35cm/1.15Ft (D to A), Super Flexible Slim High Speed 4K 60Hz HDR 2.0, Fit for Sony A7RIII / A6600 / A6500, for FUJIFILM X-T3 / X-T4, for GoPro Hero 7/6/5-3042B
Asin: B08R9MZL69 | Model: 3042-AU | PartNumber: 3042-AU
【High-Speed Cable】Ultra Thin 2.0 Version Standard Hdmi Cable Supports Ultra Hd 4K@60Hz, Full Hd 1080P, 3D, Ethernet, Audio Return Channel(Arc), Hdr, And You Can Transmit High-Resolution Sound Formats..
【What You Can Get】The Package Include 1 X Hdmi Cable, 1 X Cable Tie And Professional After-Sales Service. Come With A Cable Tie For Cable Management To Make Your Rig Neat. If You Have Any Questions, Please Feel Free To Contact Us..
【4K@60Hz Video Output】The Hdmi Cable Fully Supports 4K Resolution At 60Hz And 2K Resolution At 165Hz With Life-Like Color. You Can Enjoy Big Screens And True-To-Life 4K Visuals For The Ultimate Visual Experience..
【Ultra Thin & Flexible】The Ultra-Thin And Flexible High-Speed Hdmi Cable (35Cm/1.15Ft) With 3.6Mm Diameter Fits Perfectly In Tight Spaces, Designed For Gimbal, Camera Stabilizer, And Rigs Applications Where Flexibility And Compact Cable Routing Is Required..
Features
- Micro-Cable Connectivity The D to A HDMI cable 3042B offers you a convenient way to optimize your viewing. Connect digital cameras, camcorders, tablets, or other micro Cable-eabled devices to the port on most displays to enjoy the high-definition audio and video.
- Ultra Thin & Flexible The ultra-thin and flexible high-speed HDMI cable (35cm/1.15ft) with 3.6mm diameter fits perfectly in tight spaces, designed for gimbal, camera stabilizer, and rigs applications where flexibility and compact cable routing is required.
- High-Speed Cable Ultra thin 2.0 version standard HDMI cable supports Ultra HD 4K@60Hz, Full HD 1080P, 3D, Ethernet, Audio Return Channel(ARC), HDR, and you can transmit high-resolution sound formats.
- 4K@60Hz video output The HDMI cable fully supports 4K resolution at 60Hz and 2K resolution at 165Hz with life-like color. You can enjoy big screens and true-to-life 4K visuals for the ultimate visual experience.
- What you can get The package include 1 x HDMI cable, 1 x Cable tie and professional after-sales service. Come with a cable tie for cable management to make your rig neat. If you have any questions, please feel free to contact us.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 0.39 x 13.78 x 0.75 inches | Weight: 0.03 pounds
See On Amazon #13
SMALLRIG Action 3 Action 4 Camera Cage for DJI, Protective Cage Compatible for DJI Mic, Protective Frame for DJI Osmo Action 3 Action 4-4119B
Asin: B0BN18RQL7
Quick-Locking Mechanism & Full Access - Effortlessly Secure Or Release Your Camera With The Press Lock Feature While Maintaining Full Access To All Buttons And Touchscreen Functions. The Cage Allows You To Replace The Battery From The Right Side Without Removing The Cage..
Premium Material Construction - Crafted With A Combination Of Lightweight And Solid Aluminum Alloy And Silica Gel, The Smallrig Action3/ 4 Cage 4119 Offers Exceptional Durability Without Adding Unnecessary Weight To Your Setup..
Please Note That This Camera Cage Is Not Designed For Underwater Photography..
Versatile Extension - The Top Of The Cage Features A Cold Shoe Mount And Anti-Twist 1/4"-20 Thread Holes On Three Sides Allowing For Convenient Attachment Of Various Accessories. Whether It's Time-Lapse Photography, Skateboarding, Or Other Scenes, You Can Easily Use Accessories Like The Smallrig Super Clamp 3757/ 3755, Magic Arm 3873/3874, Suction Cup Mount 4193, Etc..
Compatible For Dji Mic & Original Adapter - Attach Your Mic For Dji On The Left Side Of The Cage. The Bottom And Right Side Magnetic Mounts Support The Original Magnetic Quick-Release Adapter For Dji Or The Smallrig Magnetic Adapter Mount 3662 For Effortless Switching Between Horizontal And Vertical Shooting Modes..
Features
- Tailor-made for DJI Osmo Action 3/ Action 4 - SmallRig Action Camera Cage 4119 is specifically designed for DJI Osmo Action 3/ Action 4, ensuring all-around protection and offering various mounting options for professional-grade video recording.
- Compatible for DJI Mic & Original Adapter - Attach your Mic for DJI on the left side of the cage. The bottom and right side magnetic mounts support the original magnetic quick-release adapter for DJI or the SmallRig Magnetic Adapter Mount 3662 for effortless switching between horizontal and vertical shooting modes.
- Quick-locking Mechanism & Full Access - Effortlessly secure or release your camera with the press lock feature while maintaining full access to all buttons and touchscreen functions. The cage allows you to replace the battery from the right side without removing the cage.
- Versatile Extension - The top of the cage features a cold shoe mount and anti-twist 1/4-20 thread holes on three sides allowing for convenient attachment of various accessories. Whether it's time-lapse photography, skateboarding, or other scenes, you can easily use accessories like the SmallRig Super Clamp 3757/ 3755, Magic Arm 3873/3874, Suction Cup Mount 4193, etc.
- Premium Material Construction - Crafted with a combination of lightweight and solid aluminum alloy and silica gel, the SmallRig Action3/ 4 Cage 4119 offers exceptional durability without adding unnecessary weight to your setup.
- Please note that this camera cage is not designed for underwater photography.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.30 x 3.20 x 1.37 inches | Weight: 0.21 pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #14
SMALLRIG Rosette Magic Arm 11 Inch with Ball Head, 1/4"-20 Screws, and Anti-Twist Pins, for Cameras/iPads/Monitors/LED Lights/Smartphones/Action Cameras, Max Load Capacity 3kg - 3959
Asin: B0BR7L53ZG | Model: 3959 | PartNumber: 3959
Dual 1/4"-20 Screw: Rosette Magic Arm 3959 Comes With 1/4"-20 Screw On Each End To Connect Smallrig Led Light 3808, Smallrig Monitor Cage 3788, Etc..
In The Box: 1 X Rosette Magic Arm. Net Weight: 330G.
Dual Ball Head: 360° Dual Ball Head Design Allows You To Adjust Angles Freely. Note: The Maximum Payload Is 3Kg.
Rosette Arm: New Locking Structure At The Gear Joints For Smoother Angle Adjustment. An Ergonomically Designed Anti-Off Thumb Lever, With A Built-In Thrust Ball Bearing, Feels Smooth And Comfortable And Quickly Locks Arm And Ball Heads In A Second.
Features
- 11" Magic Arm: Rosette Arm 3959 is made of aircraft-grade aluminum and stainless steel for more robustness and durability, features 1/4"-20 screws and anti-twist pins at both ends for securely attaching accessories.
- Rosette Arm: New locking structure at the gear joints for smoother angle adjustment. An ergonomically designed anti-off thumb lever, with a built-in thrust ball bearing, feels smooth and comfortable and quickly locks arm and ball heads in a second
- Dual 1/4-20 Screw: Rosette magic arm 3959 comes with 1/4-20 screw on each end to connect SmallRig LED Light 3808, SmallRig monitor cage 3788, etc.
- Dual Ball Head: 360 dual ball head design allows you to adjust angles freely. NOTE: The maximum payload is 3kg
- In the Box: 1 x Rosette Magic Arm. Net Weight: 330g
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.26 x 10.98 x 2.36 inches | Weight: 0.73 pounds
Warranty: Manufacturer Warranty for 2 years from day of purchase
See On Amazon #15
SmallRig Cage Kit for Sony A6700 with a Cable Clamp for HDMI, Built-in Quick Release Plate for Arca-Type, Film Movie Making Camera Video Cage with Shoe Mount, 1/4''-20 & 3/8''-16 Threaded Holes - 4336
Asin: B0CF54GL7B | Model: 4336-CF | PartNumber: 4336-CF
Full Protection: The All-In-One Complete Housing Fits The Sony A6700 Very Well, Locks The Camera By 1/4"-20 Screw And M2.5 Screw, Which Maintains Full Access To Your Ports, Controls And Battery Door And Provides Protection For Your Portable Camera Platform. Note: Remove The Strap Ring On The Right Side Of The Camera Before Installing The Cage. Refer To The User Manual For Installation..
With Hdmi Cable Clamp: The Sony A6700 Cage Kit Includes Cable Clamp That Protects Ports For Stable Transmission And Allows Quick Assembly And Disassembly With A Thumb-Scream: If You Need To Use The Headphone Jack From The Carera, You Must Remove The Hdmi Clamp Cable First..
Integrated Arca-Switzerland Plate: The Built-In Quick Release Plate For Arca-Swiss Makes It Easy To Quickly Switch Between Tripods, Stabilizers Or Handheld Devices For Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro Shooting Modes..
Multiple Mounting Points: Comes With 1/4''-20 And 3/8''-16 Threaded Holes For Connecting Accessories Such As A 2916 Side Handle, Magic Arm With 2070 Ball Head And A 3/8"-16 Top Location Hole For 2165/3765 Top Handle And Cold Shoe That Supports Microphones And Led Lights The Cage Also Fits The Strap 3848 Hand Strap, Psw2398 Wrist Strap And Psc2428 Shoulder Strap..
Excellent Grip Feeling: Featured With An Additional Hinge Arm On The Battery Door, This Product Not Only Fits The Curve Of The Camera Perfectly, But Also Significantly Improves The Overall Grip Feel.The Ergonomic Design Provides A Comfortable And Secure Grip Of The Camera..
Features
- For Sony A6700: SmallRig Cage 4336 is designed for Sony A6700, which includes a cable clamp for HDMI, protects the camera while making it easy to record videos with its multiple accessory mounting points, which also allows you to focus on capturing stunning images.
- Excellent Grip Feeling: Featured with an additional hinge arm on the battery door, this product not only fits the curve of the camera perfectly, but also significantly improves the overall grip feel.The ergonomic design provides a comfortable and secure grip of the camera.
- Full Protection: The all-in-one complete housing fits the Sony A6700 very well, locks the camera by 1/4-20 screw and M2.5 screw, which maintains full access to your ports, controls and battery door and provides protection for your portable camera platform. Note: Remove the strap ring on the right side of the camera before installing the cage. Refer to the user manual for installation.
- Multiple Mounting Points: Comes with 1/4''-20 and 3/8''-16 threaded holes for connecting accessories such as a 2916 side handle, magic arm with 2070 ball head and a 3/8-16 top location hole for 2165/3765 top handle and cold shoe that supports microphones and LED lights The cage also Fits the strap 3848 hand strap, PSW2398 wrist strap and PSC2428 shoulder strap.
- With HDMI Cable Clamp: The Sony A6700 Cage Kit includes cable clamp that protects ports for stable transmission and allows quick assembly and disassembly with a thumb-scream: If you need to use the headphone jack from the carera, you must remove the HDMI clamp cable first.
- Integrated Arca-Switzerland Plate: The built-in quick release plate for Arca-Swiss makes it easy to quickly switch between tripods, stabilizers or handheld devices for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro shooting modes.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.45 x 5.49 x 3.58 inches | Weight: 0.34 pounds
See On Amazon #16
SmallRig Hero12 / Hero11 / Hero 10 / Hero 9 Black Cage for GoPro, with 2 Cold Shoe Mount for GoPro Light Mod and Common Microphone, Led Video Light - 3083C
Asin: B0978Z9S5W | Model: 3083-AU | PartNumber: 3083-AU
Moulded Design: The Cage Fits The Camera So Well That It Does Not Block The Screen, Buttons And Usb-C Port. The Side Panel Features Grip Points And Guide Marks. Simply Press The Cover To Securely Lock It In Place, And Press The Button To Easily Release It..
Quick Installation & Removal: The Audio Adapter Bracket Can Be Quickly Installed Or Removed, And The Original Interface Of The Cage Can Still Be Used After The Bracket Is Removed. The Bottom Of The Bracket Has A Dedicated Interface For Gopro, Which Can Be Easily Installed On Original Accessories For Gopro..
Compatible With Audio Adapter: The Bottom Bracket Can Be Installed With The Original Microphone Adapter, And The Side Plate Can Be Replaced By The Original Side Plate Of The Camera, Which Supports Audio Recording While Charging.
Dual Cold Shoe Mount: The Cage Comes With Cold Shoe Mount On The Top And Right Side, Which Can Compatible With For Gopro Light Mod And Common Microphone, Led Video Light At The Same Time..
Features
- For GoPro Hero12 / 11 / 10 / 9 Black: The Cage 3083C is an all-in-one full cage which is compatible with microphones, LED lights, providing a perfect Vlog filming solution.
- Dual Cold Shoe Mount: The cage comes with cold shoe mount on the top and right side, which can compatible with for GoPro light mod and common microphone, LED video light at the same time.
- Moulded Design: The cage fits the camera so well that it does not block the screen, buttons and USB-C port. The side panel features grip points and guide marks. Simply press the cover to securely lock it in place, and press the button to easily release it.
- Compatible with Audio Adapter: The bottom bracket can be installed with the original microphone adapter, and the side plate can be replaced by the original side plate of the camera, which supports audio recording while charging
- Quick Installation & Removal: The audio adapter bracket can be quickly installed or removed, and the original interface of the cage can still be used after the bracket is removed. The bottom of the bracket has a dedicated interface for GoPro, which can be easily installed on original accessories for GoPro.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.34 x 3.82 x 3.11 inches | Weight: 0.08 pounds
See On Amazon #17
SmallRig Mini Ball Head, Tripod Head Camera 360 Panoramic with 1/4" Screw 3/8" Thread Mount and Quick Release Plate Metal Ball Joint for Monopod, DSLR, Phone, Gopro, Max Load 4.4lbs/2kg - BUT2665
Asin: B0833XVLK8 | Model: BUT2665-AU | PartNumber: BUT2665-AU
【Precision Panning Base】The Base Of Smallrig Ball Head Is Finely Laser-Engraved In 5° Increments From ±0°-330° For Tracking Progressive Panning, Ideal For Multi-Shot Panoramic Photography.
【High Stability】: Low-Profile Ball Head Design Creates A Stronger Locking Force And Higher Stability. Screw Knob Is Located On The Side Of The Ball Instead Of The Bottom Of The Ball Head Bring 15% Down The Whole Center Of The Gravity Of The Ball Head, Enhance Stability.
【Aluminum Alloy Material】: Made Of Aluminum Alloy, The Max Load Is 4.4Lbs/2 Kg, Very Strong And Durable. With Rubber-Padded Mount On The Top To Protect Your Camera From Potential Scratches.
【360 Degree Swivel Tripod Head】 Ensure 360° Panoramic Rotation For Panoramic Shooting, -90°/+45° Front Tilt And -50°/+50° Lateral Tilt For Multi-Angle Adjustment Including Horizontal Shooting And Vertical Shooting..
Features
- UNIVERSAL COMPATIBILITY SmallRig mini ball head features 1/4 " thread QR plate screw, 1/4 to 3/8 Screw Adapter and a 3/8 " bottom screw thread which is suitable for most DSLR cameras, camcorders, tripods, sliders, monopods.
- 360 Degree Swivel Tripod Head Ensure 360 panoramic rotation for panoramic shooting, -90 /+45 front tilt and -50 /+50 lateral tilt for multi-angle adjustment including horizontal shooting and vertical shooting.
- PRECISION PANNING BASE The base of SmallRig ball head is finely laser-engraved in 5 increments from 0 -330 for tracking progressive panning, ideal for multi-shot panoramic photography
- ALUMINUM ALLOY MATERIAL : Made of aluminum alloy, the Max load is 4.4lbs/2 kg, Very strong and durable. With rubber-padded mount on the top to protect your camera from potential scratches
- HIGH STABILITY : Low-profile ball head design creates a stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 2.36 x 3.15 x 2.56 inches | Weight: 0.41 Pounds
See On Amazon #18
SmallRig Hero12 / Hero11 / Hero 10 / Hero 9 Black Cage for GoPro, Compatible with The Lens Filter Max Lens on Camera, with 2 Cold Shoe Mount for Microphone and Led Video Light - 3084C
Asin: B08XVD7S2X | Model: 3084-CF-FBA-US01 | PartNumber: 3084-CF-FBA-US01 | Ean: 6941590013640
Compatible With Original Baseplate: The Bottom Contains A Foldable Mount For Gopro Compatible With The Original Baseplate, And A 1/4 Threaded Hole Can Also Be Directly Connected To A Tripod But2664, Magic Arm 3873 / 3874 / 3959, Crab-Shaped Clamp 3757B / 4102B, Suction Cup Mount 3565 / 4193..
Quick Release Button: The Side Plate Is Locked By Pressing The Cover And Released By Pushing The Button For Battery Switches And Gives Access To Type-C Port..
Notice: Due To The Special Surface Technology Of Gopro Hero12 Black, 3084C May Cause Slight Indentation On The Camera Body In Order To Ensure Better Installation, But It Does Not Affect The Use Of The Device..
Removable Eva Side Plate: The Side Panel Features Magnetic Eva To Be Easily Mounted Or Removed. You Can Keep The Side Plate In Place Without Disassembling The Original One For Better Protection Of The Camera..
Cold Shoe Mounts: The Top And Right Sides Are Equipped With Two Cold Shoe Mounts That Can Be Connected To Accessories Such As Microphones And Led Lights. Its Hollow-Carved Cold Shoe Design Does Not Block Gps Signal..
Features
- For GoPro Hero 12 / 11 / 10 / 9 Black: The Cage 3084C is an all-in-one full cage which is compatible with microphones, LED lights, providing a perfect Vlog filming solution. It supports lens replacement, and it's compatible with the Max lens mod.
- Cold Shoe Mounts: The top and right sides are equipped with two cold shoe mounts that can be connected to accessories such as microphones and LED lights. Its hollow-carved cold shoe design does not block GPS signal.
- Compatible with Original Baseplate: The bottom contains a foldable mount for GoPro compatible with the original baseplate, and a 1/4 threaded hole can also be directly connected to a tripod BUT2664, magic arm 3873 / 3874 / 3959, crab-shaped clamp 3757B / 4102B, suction cup mount 3565 / 4193.
- Removable EVA Side Plate: The side panel features magnetic EVA to be easily mounted or removed. You can keep the side plate in place without disassembling the original one for better protection of the camera.
- Quick Release Button: The side plate is locked by pressing the cover and released by pushing the button for battery switches and gives access to type-c port.
- Notice: Due to the special surface technology of GoPro Hero12 Black, 3084C may cause slight indentation on the camera body in order to ensure better installation, but it does not affect the use of the device.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.38 x 3.23 x 2.56 inches | Weight: 0.13 pounds
See On Amazon #19
SMALLRIG Camera Cage Only for Sony Alpha 7S III / A7S III / A7SIII / A7S3-2999
Asin: B08HCMFPN4 | Model: 2999 | PartNumber: 2999 | Ean: 6941590001968
【Multiple Mounting Points】In Addition To One Cold Shoe Mount And Multiple 1/4"-20 And 3/8"-16 Threaded Holes, This Formfitting Aluminum Cage Features Several Arri-Style Mounts For Preventing Accessories From Twisting When Mounted On The Cage. It Also Comes With A Built-In Nato Rail On The Left Of The Cage. Mounting Holes On The Front Allow Mounting A Separately Available Lens Adapter 1764..
【Sweet Design】Lightweight Design With Only 200G. Strap Holes Are Included To Add A Separately Available Wrist Strap Or Neck Strap To Your Rig. Besides, With Built-In Magnetic Suction Design, The Included Allen Wrench Is Ready To Use Without Fear Of Loss..
【Power Backup Solution】Smallrig Np-Fz100 Camera Battery Charger Set Is Available Now, Two 2040Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fz100 Battery 3824.
【Recommendations】The Cage Is Compatible With Smallrig Universal Accessory System. You Can Attach Smallrig Wooden Side Handle 2093 For Hand-Held Shooting, And Smallrig Cable Clamp 3000 To Protect The Hdmi Cable And Port. Arri-Style Mounts On The Top And Side Are Provided To Attach Smallrig Arri Locating Handle Or Smallrig Ball Head Magic Arm..
【Perfect Protection】The Cage Incorporates An Anti-Twist Design With An M2.5 Screw Fixed To The Strap Hole In Addition To The 1/4"-20 Camera Mounting Screw So Your Camera Can't Move Around In The Cage. Smallrig Cage 2999 Also Incorporates An Anti-Twist Design With Padding On The Base To Protect The Camera From Scratching..
Features
- FORMFITTING FULL CAGE SmallRig A7S III Cage 2999 maintains access to the camera's controls and hot shoe. Made of premium aluminium alloy, the cage is a solid piece of metal that is highly resistant to oxidation and stands the test of time.
- PERFECT PROTECTION The cage incorporates an anti-twist design with an M2.5 screw fixed to the strap hole in addition to the 1/4-20 camera mounting screw so your camera can't move around in the cage. SmallRig Cage 2999 also incorporates an anti-twist design with padding on the base to protect the camera from scratching.
- MULTIPLE MOUNTING POINTS In addition to one cold shoe mount and multiple 1/4-20 and 3/8-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. It also comes with a built-in NATO rail on the left of the cage. Mounting holes on the front allow mounting a separately available lens adapter 1764.
- RECOMMENDATIONS The cage is compatible with SmallRig universal accessory system. You can attach SmallRig Wooden Side Handle 2093 for hand-held shooting, and SmallRig Cable Clamp 3000 to protect the HDMI cable and port. ARRI-style mounts on the top and side are provided to attach SmallRig ARRI Locating Handle or SmallRig Ball Head Magic Arm.
- SWEET DESIGN Lightweight design with only 200g. Strap holes are included to add a separately available wrist strap or neck strap to your rig. Besides, with built-in magnetic suction design, the included Allen Wrench is ready to use without fear of loss.
- Power Backup Solution SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 2.52 x 5.75 x 4.21 inches | Weight: 0.49 pounds
See On Amazon
Looking For Something Else?
Search