AUTOOL Fuel Injector Tester and Cleaner 12V & High Volt, Fuel Injector Cleaning Tool Kit for GDI, Adjustable Pulse Width RPM, Two Injectors Test Simultaneously
Asin: B09Q6B6617 | Ean: 6972697785109
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Standard Fuel Injector & High-Pressure Fuel Injector】The Fuel Injector Cleaning Kit Is Not Only Suitable For Standard Injectors In Gasoline Engines, But Also For High Pressure Injectors In Diesel Engines. Configurable 12V And High Voltage Drive Options. The High Voltage Is Suitable For 70V, 120V And Other Injectors..
【Perfect Match】The Drive Mode Of Gdi Injector Added By This Injector Tester Can Be Used As An Upgrade Kit With The Old Version Of The Machine. Can Be Used To Enhance The Pulse Signal Of All Injectors And Can Be Used With Ultrasonic Cleaners And Older Injector Testers..
【Three Years Warranty】For Any Quality Problems. If Ct60 Has Any Defect, We Will Provide New Replacement Or Solutions For Our Customers Until Satisfaction Without Delay, And Provides Lifetime Technical Support. For Any Needs, You Are Warmly Welcomed To Contact Us And We Will Get Back To You Asap Within 24 Hours..
【Lcd Display】The Digital Display Shows The Frequency And Time Of Operation, So You Can Observe The Injector Condition And Adjust The Rpm At Any Time For Flexible Observation Of The Injector Performance. This Fuel Injector Cleaner Tool Is Can Also Connect Two Injectors For The Simultaneous Operation To Compare The Sprayability Status And The Spray Angle Of The Fuel Injector..
【Adjustable Working Frequency & Time】Fuel Injector Tester Is Possible To Set Multiple Pulse Outputs And Adjust Speed, Pulse Width, Operating Time And Other Parameters As Required. The Operating Frequency Range Can Reach 600~4000 Rpm, The Working Time Setting Range Can Reach 0~99 Minutes..
Features
- Major Function AUTOOL CT60 fuel injector tester and cleaner is a professional machine specially used to easily solve common faults such as as stuck, blocked, leaked, or insufficient combustion of the fuel injector.
- Adjustable Working Frequency & Time Fuel injector tester is possible to set multiple pulse outputs and adjust speed, pulse width, operating time and other parameters as required. The operating frequency range can reach 600~4000 rpm, the working time setting range can reach 0~99 minutes.
- Standard Fuel Injector & High-Pressure Fuel Injector The fuel injector cleaning kit is not only suitable for standard injectors in gasoline engines, but also for high pressure injectors in diesel engines. Configurable 12V and high voltage drive options. The high voltage is suitable for 70V, 120V and other injectors.
- LCD Display The digital display shows the frequency and time of operation, so you can observe the injector condition and adjust the RPM at any time for flexible observation of the injector performance. This fuel injector cleaner tool is can also connect two injectors for the simultaneous operation to compare the sprayability status and the spray angle of the fuel injector.
- Perfect Match The drive mode of GDI injector added by this injector tester can be used as an upgrade kit with the old version of the machine. Can be used to enhance the pulse signal of all injectors and can be used with ultrasonic cleaners and older injector testers.
- Three Years Warranty For any quality problems. If CT60 has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
See On Amazon Similar To AUTOOL Fuel Injector Tester and
#1
Smoke Machine Automotive Leak Detector,Evap Vacuum Smoke Diagnostic Tester,Pipeline Fuel Leakage Detector Compatible with 12V Vehicles
Asin: B0BGB41DLK | Model: SDT103 | PartNumber: SDT103 | Ean: 6972697787738
【External Flow Meter】You Can Easily Control The Air Pressure, Because The Air Pressure Of Each Pipe In The Car Is Different. If The Air Pressure Is Too High, The Pipe Will Be Damaged, And If The Air Pressure Is Too Low, The Leak Will Not Be Detected. Therefore, The Flow Meter Is Very Important To Protect Your Detection System More Effectively. Make Testing Safer.
【Wide Testing Range】The Smoke Leak Detector Can Do Smoke Testing Of Multiple Systems, Such As Evap Systems, Intake Systems, Cooling / Egr /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo Leaks.Applicable Cars, Motorcycles, Snowmobiles, Off-Road Vehicles, Atvs, Light Trucks And Speedboats Boats..
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Tell Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【Evap Detection】American Cars That Began Production In 1996 Are Equipped With Evap Service Ports; In Most American Cars, The Evap Service Port Is Usually Located In The Engine Compartment, But The Evap Service Port Of Some Special Models May Be Located In Other Locations. Open The Plastic Cover Of The Evap Service Port, Then Use The Spool Wrench To Remove The Check Valve Clockwise, Then Install The Evap Service Port Adapter, And Introduce Smoke From The Port Into The Evap Leak Detection System..
【No Air Pump】1. The Autool Sdt103 Smoke Leak Detector Doesn't Come With An Internal Air Pump, So You'll Need To Connect It To An External Workshop Air Source And A 12V Vehicle Power Supply To Bring In The Workshop Air.2. Turn The Flow Control Dial Of The Autool Sdt103 Smoke Leak Detector Counterclockwise To Open The Airflow, And Then Switch On The Power At The Back Of The Device. This Will Start The Autool Sdt103 Machine, Generating Smoke. (When Adding Smoke Oil To The Autool Sdt103 Smoke Leak Detector, Make Sure Not To Exceed 20 Ml, And Please Use Baby Oil Or Paraffin Oila)..
Features
- Why Need It For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
- No Air Pump 1. The AUTOOL SDT103 smoke leak detector doesn't come with an internal air pump, so you'll need to connect it to an external workshop air source and a 12V vehicle power supply to bring in the workshop air.2. Turn the flow control dial of the AUTOOL SDT103 smoke leak detector counterclockwise to open the airflow, and then switch on the power at the back of the device. This will start the AUTOOL SDT103 machine, generating smoke. (When adding smoke oil to the AUTOOL SDT103 smoke leak detector, make sure not to exceed 20 ml, and please use baby oil or paraffin oila).
- External Flow Meter You can easily control the air pressure, because the air pressure of each pipe in the car is different. If the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected. Therefore, the flow meter is very important to protect your detection system more effectively. Make testing safer
- EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
- Wide Testing Range The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Warranty: 3 years warranty
See On Amazon #2
AUTOOL Automotive Smoke Machine Leak Detector,Evap Vacuum Smoke Diagnostic Tester,Pipeline Fuel Leakage Detector Compatible with 12V Cars, Trucks, Motorcycle, ATV, Boats, Snowmobiles
Asin: B0BGB16LBC | Model: SDT101 | PartNumber: SDT101 | Ean: 6972697787721
【Wide Testing Range】The Smoke Leak Detector Can Do Smoke Testing Of Multiple Systems, Such As Evap Systems, Intake Systems, Cooling / Egr /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo Leaks.Applicable Cars, Motorcycles, Snowmobiles, Off-Road Vehicles, Atvs, Light Trucks And Speedboats Boats..
【Advanced And Safe】The Autool Sdt101 Evap Smoke Machine With Thick Smoke Output Detects Even The Smallest Leaks. It Is Safe And Reliable As There Is No Need To Start The Vehicle During Use. And The Smoke Output Is Healthy And Harmless. Moreover, When This Smoke Leak Detector Can Be Smart Power Off, The Power Will Be Automatically Shut Off When It Exceeds The 75 ℃ Housing Limit..
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Tell Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【Evap Detection】American Cars That Began Production In 1996 Are Equipped With Evap Service Ports; In Most American Cars, The Evap Service Port Is Usually Located In The Engine Compartment, But The Evap Service Port Of Some Special Models May Be Located In Other Locations. Open The Plastic Cover Of The Evap Service Port, Then Use The Spool Wrench To Remove The Check Valve Clockwise, Then Install The Evap Service Port Adapter, And Introduce Smoke From The Port Into The Evap Leak Detection System..
【No Air Pump】Connect Shop Air Supply, Connect 12V Vehicle Power, Press The Autool Sdt101 Smoke Control Switch, The Indicator Lights On, Wait For About 10 Seconds, Insert The Cone Head On The Smoke Outlet Pipe Into The Air Inlet Cone Adapter When The Smoke Becomes Thick.Wait For About 1 To 2 Minutes, You Can Use A Flashlight With Strong Light To Help Find The Leaks In The Pipeline And Then Autool Sdt101 Smoke Machine Automotive Will Diagnose The Leakage Status..
Features
- Why Need It For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
- No Air Pump Connect shop air supply, connect 12V vehicle power, Press the AUTOOL SDT101 smoke control switch, the indicator lights on, wait for about 10 seconds, insert the cone head on the smoke outlet pipe into the air inlet cone adapter when the smoke becomes thick.Wait for about 1 to 2 minutes, you can use a flashlight with strong light to help find the leaks in the pipeline and then AUTOOL SDT101 smoke machine automotive will diagnose the leakage status.
- Wide Testing Range The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
- EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
- Advanced and Safe The AUTOOL SDT101 evap smoke machine with thick smoke output detects even the smallest leaks. It is safe and reliable as there is no need to start the vehicle during use. And the smoke output is healthy and harmless. Moreover, when this smoke leak detector can be smart power off, the power will be automatically shut off when it exceeds the 75 housing limit.
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Dimensions: 7.00 x 10.20 x 7.80 inches
Warranty: 3 year warranty
See On Amazon #3
Flush Cleaner Adapter For Car Fuel Injector Tester Fuel Pump Pressure Test Automotive Diesel Gas Injectors Nozzles Unlimited Pulse Cleaner
Asin: B081FB83MY | Model: CT50 | PartNumber: CT50 | Ean: 0795853404678 | UPC: 795853404678
【Working Requirements】 It Needs The Combination Of 12V Dc Power Supply And Aerosol Of Injector Or Carburetor Cleaner ( Not Included ). Please Prepare These Necessary Tools.
【Special Note】Need A Fuel Jet Cleaning Agent Aerosol Cans (Not Included) And Dc 12V Dc Battery Power (Not Included), Do Not Need Compressed Air..
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Contact Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【Package Covers】The Package Consists Of Two White Tubes And Two Alligator Clip Charging Cables, Which Accommodate 2 Different Sizes Of Fuel Injectors..
【Working Principle】The Electrical Port Of The Injector Connect The 12V Power By This Cable. When The Current Is Switched On, The Solenoid Valve In The Nozzle Is Opened. Meanwhile Cleaning Liquid Flush Through White Tube By Liquid Pressure In Carb Cleaner Bottles, Then Through Injector To Clean It..
Features
- Main Usage As an adapter for DIY cleaning the fuel injector nozzle, removed the injector from the engine, it can be cleaned separately. When the injector is clogged, you can use it to save expensive nozzles,This DIY Injector Cleaner adaptor kit is easily to clean most car motorcycle fuel injectors.Universal fit any 12 - 24V car, motorcycle, electric car, ATV, Boat and so on.
- Working principle The electrical port of the Injector connect the 12V power by this cable. When the current is switched on, the solenoid valve in the nozzle is opened. Meanwhile cleaning liquid flush through white tube by liquid pressure in CARB cleaner bottles, then through injector to clean it.
- Working requirements It needs the combination of 12V DC power supply and aerosol of Injector or carburetor cleaner ( not included ). Please prepare these necessary tools
- Package Covers The package consists of two white tubes and two alligator clip charging cables, which accommodate 2 different sizes of fuel injectors.
- Special Note Need a fuel jet cleaning agent aerosol cans (not included) and DC 12V DC battery power (not included), do not need compressed air.
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
See On Amazon #4
AUTOOL Automotive Smoke Leak Detector Evap Car Pipe Leakage Tester Fuel Leak Locator Universal for Motorcycle/Car/Truck
Asin: B07QWT9RB8 | Model: 01 | PartNumber: 01 | Ean: 0733810035442 | UPC: 733810035442
【Built-In Air Pump】Customers Do Not Need To Purchase Additional Air Pumps, We Use High-Quality Materials, After Many Tests, Please Rest Assured To Use. You Can Save More Time And Money.
【Stable And Efficient】Fill The Car Pipes With Smoke, Wait For About 2 Minutes, And Use Inspection Lights To Assist In Lighting, And Start To Check The System Leakage Fault Points, Which Is Very Efficient..
【Evap Detection】American Cars That Began Production In 1996 Are Equipped With Evap Service Ports; In Most American Cars, The Evap Service Port Is Usually Located In The Engine Compartment, But The Evap Service Port Of Some Special Models May Be Located In Other Locations. Open The Plastic Cover Of The Evap Service Port, Then Use The Spool Wrench To Remove The Check Valve Clockwise, Then Install The Evap Service Port Adapter, And Introduce Smoke From The Port Into The Evap Leak Detection System..
【Wide Testing Range】The Smoke Leak Detector Can Do Smoke Testing Of Multiple Systems, Such As Evap Systems, Intake Systems, Cooling / Egr /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo Leaks.Applicable Cars, Motorcycles, Snowmobiles, Off-Road Vehicles, Atvs, Light Trucks And Speedboats Boats..
Features
- Why Need It For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
- Wide Testing Range The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
- Built-in Air Pump Customers do not need to purchase additional air pumps, we use high-quality materials, after many tests, please rest assured to use. You can save more time and money
- EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
- Stable and efficient Fill the car pipes with smoke, wait for about 2 minutes, and use inspection lights to assist in lighting, and start to check the system leakage fault points, which is very efficient.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Dimensions: 10.24 x 11.02 x 9.06 Inches
See On Amazon #5
Universal Easy Intake Adapter for 12V Vehicle Pipes Fuel Leakage Detector Diagnositc Tester
Asin: B07QXQH3ZN | Model: 5 | PartNumber: 5 | Ean: 0733810035435 | UPC: 733810035435
【Humanized Design】Compared To Traditional,Autool Easy Intake Adapter With A Steel Ring Removed At The End In Order To Use A Smaller Fitting.Can Be Tested The Intake/Exhaust Diameter Is Bigger Than 2" More Quickly And Accurately Leakage ..
【Widely Applicable】Autool Easy Intake Adapter Is Suitable For Any Shape Of Intake And Exhaust System,Connect The Instrument, Manually Squeeze The Hand Pump To Inflate The Airbag, And Then Perform Additional Testing.Such As Round, Oval, Square, Rectangular, Even Large Angle And Difficult To Reach Intake And Exhaust System (Note: Intake/Exhaust Diameter Needs To Be> 2 Inches), It Allows Steam Through, You Can Quickly Diagnose Any Air Intake Problems On The Vehicle Duct..
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Contact Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【Widely Compatible】Autool Easy Intake Adapter 100% Compatible With Car Intake And Exhaust Ports, Including Small Cars And Heavy Trucks. The Inflatable Bladder Can Be Used With All Evap System Flue Gas Leakage Testers, Passing Steam, Detecting Leaks In The Car Intake/Exhaust System, Save More Time And Money And Reducing Leakage Check The Workload To Realize Quick Repair.
【Fast And Convenient】Autool Easy Intake Adapter Is An Inflatable Block-Shaped Airbag With A Pressurized Steam Channel, Which Is Used For Intake And Exhaust Smoke Test. The Wall Thickness Is 1.5Mm And Its Diameter Can Be Expanded To 121Mm. It Helps Technicians To Quickly And Easily Test The Entire Intake Or Exhaust System，Note: Please Make Sure The Intake/Exhaust Diameter Is Bigger Than 2"..
Features
- Excellent Quality AUTOOL Easy Intake Adapter is made of high-quality silicone, with strong sealing, softness, high temperature resistance, good elasticity, and tear resistance.All Easy Intake Adapters have undergone multiple simulation tests ensure can detect intake and exhaust leakage more quickly and accurately
- Fast and Convenient AUTOOL Easy intake adapter is an inflatable block-shaped airbag with a pressurized steam channel, which is used for intake and exhaust smoke test. The wall thickness is 1.5mm and its diameter can be expanded to 121mm. It helps technicians to quickly and easily test the entire intake or exhaust system Note: Please make sure the intake/exhaust diameter is bigger than 2.
- Humanized Design Compared to traditional,AUTOOL Easy intake adapter with a steel ring removed at the end in order to use a smaller fitting.can be tested the intake/exhaust diameter is bigger than 2 more quickly and accurately leakage .
- Widely Compatible AUTOOL Easy intake adapter 100% compatible with car intake and exhaust ports, including small cars and heavy trucks. The inflatable bladder can be used with all EVAP system flue gas leakage testers, passing steam, detecting leaks in the car intake/exhaust system, Save more time and money and reducing leakage check the workload to realize quick repair
- Widely Applicable AUTOOL Easy intake adapter is suitable for any shape of intake and exhaust system,Connect the instrument, manually squeeze the hand pump to inflate the airbag, and then perform additional testing.such as round, oval, square, rectangular, even large angle and difficult to reach intake and exhaust system (note: intake/exhaust diameter needs to be> 2 inches), it allows steam through, you can quickly diagnose any air intake problems on the vehicle duct.
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
See On Amazon #6
Smoke Cone Leak Detector Exhaust Intake Boot Adapter Diagnostics for Automotive EVAP Leak Locator Tester
Asin: B07R21Z42Y | Model: LB001 | PartNumber: LB001 | Ean: 0613464649236, 0733810035398 | UPC: 613464649236, 733810035398
【High Quality】Autool Smoke Cone Is Made Of High-Quality Rubber Material, With Excellent Sealing Performance, The Easy Intake Adapter Can Be Used With Any Smoke Machine Or Diagnostic Leak Detector To Reduce The Workload Of Leak Checks..
【Widely Compatible】Autool Smoke Cone 100% Compatible With Car Intake And Exhaust Ports, Including Small Cars And Heavy Trucks. Passing Steam, Detecting Leaks In The Car Intake/Exhaust System, Save More Time And Money And Reducing Leakage Check The Workload To Realize Quick Repair.
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Contact Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【Easy To Use】Autool Smoke Cone Install The Smoke Cone Adapter To The Location Where Diagnosis Is Needed (Such As The Air Inlet/Pipe Or Exhaust Pipe), And Then Connect The Automotive Evap Smoke Machine Leak Tester To Inject The Smoke To Quick Locator The Leak Part..
【Powerful Function】 Autool Smoke Cone Works With All Automotive Smoke Machine Leak Testers. It Can Be Used For Checking Leaks On Turbo System Piping, Leak Testing Exhaust System, Also Smoke Testing Evaporative Emissions System..
Features
- New Larger Size AUTOOL smoke cone Will fit almost all exhaust tips and intake boots. Made for larger openings with a diameter up to 3.26 inches (83mm) and as small as 1 inch (26mm)
- Powerful Function AUTOOL smoke cone Works with all automotive smoke machine leak testers. It can be used for checking leaks on turbo system piping, leak testing exhaust system, also smoke testing evaporative emissions system.
- High Quality AUTOOL smoke cone is made of high-quality rubber material, with excellent sealing performance, The easy intake adapter can be used with any smoke machine or diagnostic leak detector to reduce the workload of leak checks.
- Easy to Use AUTOOL smoke cone Install the smoke cone adapter to the location where diagnosis is needed (such as the air inlet/pipe or exhaust pipe), and then connect the automotive evap smoke machine leak tester to inject the smoke to quick locator the leak part.
- Widely Compatible AUTOOL smoke cone 100% compatible with car intake and exhaust ports, including small cars and heavy trucks. passing steam, detecting leaks in the car intake/exhaust system, Save more time and money and reducing leakage check the workload to realize quick repair
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Dimensions: 2.36 x 1.97 x 3.15 Inches
See On Amazon #7
EVAP Vacuum Automotive Smoke Machine Leak Detector Diagnostic Tester
Asin: B08QV6RGVS | Model: SDT203 | PartNumber: SDT203 | Ean: 0692041525774 | UPC: 692041525774
【Evap Detection】American Cars That Began Production In 1996 Are Equipped With Evap Service Ports; In Most American Cars, The Evap Service Port Is Usually Located In The Engine Compartment, But The Evap Service Port Of Some Special Models May Be Located In Other Locations. Open The Plastic Cover Of The Evap Service Port, Then Use The Spool Wrench To Remove The Check Valve Clockwise, Then Install The Evap Service Port Adapter, And Introduce Smoke From The Port Into The Evap Leak Detection System..
【External Flow Meter】You Can Easily Control The Air Pressure, Because The Air Pressure Of Each Pipe In The Car Is Different. If The Air Pressure Is Too High, The Pipe Will Be Damaged, And If The Air Pressure Is Too Low, The Leak Will Not Be Detected. Therefore, The Flow Meter Is Very Important To Protect Your Detection System More Effectively. Make Testing Safer.
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Tell Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【External Pressure Gauge】You Can Observe The Barometer To More Accurately Determine Whether The Car Pipeline Is Leaking. If The Barometer Index Keeps Increasing, There Is No Problem With Your Car’S Pipeline. If The Barometer Index Keeps Decreasing, Your Car’S Pipeline Leaks Need To Be Repaired, And There Is A Barometer Test. Leakage Is Faster And More Accurate.
【Built-In Air Pump】Customers Do Not Need To Purchase Additional Air Pumps, We Use High-Quality Materials, After Many Tests, Please Rest Assured To Use. You Can Save More Time And Money.
Features
- Why Need It For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
- Built-in Air Pump Customers do not need to purchase additional air pumps, we use high-quality materials, after many tests, please rest assured to use. You can save more time and money
- EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
- External Pressure Gauge You can observe the barometer to more accurately determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car s pipeline. If the barometer index keeps decreasing, your car s pipeline leaks need to be repaired, and there is a barometer test. Leakage is faster and more accurate
- External Flow Meter You can easily control the air pressure, because the air pressure of each pipe in the car is different. If the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected. Therefore, the flow meter is very important to protect your detection system more effectively. Make testing safer
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
See On Amazon #8
AUTOOL Fuel Injector Cleaner Kit Fuel System Cleaner, Non-dismantle Fuel Injector Cleaner Tester 1000ML 150PSI Automotive Intake Valve Manifold Throttle Body Catalytic Converter Cleaner
Asin: B0BLJP493W | Model: C100 | PartNumber: C100 | Ean: 6972697785796
【Complete Adapters For Widely Applications】The Fuel Injector Cleaning Kit Includes A Variety Of Different Adapters, Which Can Be Used In Almost All European Union, Asian, American Cars And Light Trucks. Its Main Components And Joints Are Made Of Brass, And The Connecting Tube Is Made Of High Quality Rubber Material, Which Has Strong Toughness And Corrosion Resistance, And The Structure Is More Stable Without Oil Leakage. The Oil Tubes Are Suitable For All Cleaning Fluid..
【Three Years Warranty】For Any Quality Problems. If C100 Has Any Defect, We Will Provide New Replacement Or Solutions For Our Customers Until Satisfaction Without Delay, And Provides Lifetime Technical Support. For Any Needs, You Are Warmly Welcomed To Contact Us And We Will Get Back To You Asap Within 24 Hours..
【Easy To Store And Transport】The Fuel Injector Cleaner Kit Is Equipped With A Heavy Blow Molded Plastic Box, Which Can Withstand High-Strength Extrusion Without Deformation And Protect The Product From Damage. After Use, All Products Can Be Neatly Placed In Boxes For Easy Storage And Transportation..
【Easy Operation】The Non-Disassembled Fuel Injector Cleaner Kit Has A Special Handling Check Valve For Releasing Gas And Adding Liquid. Adjustable Pressure Gauge Up To 150Psi. The Injector Cleaning Kit Is Made Of High Pressure Quality Stainless Steel, Scratch And Corrosion Resistant, Safe And Reliable. Cleaner Canister Capacity Up To 1000Ml To Ensure Pour Enough Fuel Injector Cleaner. Note：This Fuel Injector Cleaner Kit Does Not Contain Cleaning Fluid. It Is Only Suitable For Gasoline Injectors, Not For Diesel Injectors..
Features
- Multi-functional Fuel Injector Cleaner Kit The fuel injector cleaner kit features high and low-pressure cleaning function for the whole fuel system, including throttle valve, fuel nozzle, TWC, intake manifold and exhaust pipe, etc. It can quickly and completely remove carbon deposits in about 20 minutes, efficiently restoring the vehicle's power and driving performance, and greatly reducing fuel consumption and exhaust emissions.
- Easy Operation The non-disassembled fuel injector cleaner kit has a special handling check valve for releasing gas and adding liquid. Adjustable pressure gauge up to 150PSI. The injector cleaning kit is made of high pressure quality stainless steel, scratch and corrosion resistant, safe and reliable. Cleaner canister capacity up to 1000ml to ensure pour enough fuel injector cleaner. NOTE This fuel injector cleaner kit does not contain cleaning fluid. It is only suitable for gasoline injectors, not for diesel injectors.
- Complete Adapters for Widely Applications The fuel injector cleaning kit includes a variety of different adapters, which can be used in almost all European Union, Asian, American cars and light trucks. Its main components and joints are made of brass, and the connecting tube is made of high quality rubber material, which has strong toughness and corrosion resistance, and the structure is more stable without oil leakage. The oil tubes are suitable for all cleaning fluid.
- Easy to Store and Transport The fuel injector cleaner kit is equipped with a heavy blow molded plastic box, which can withstand high-strength extrusion without deformation and protect the product from damage. After use, all products can be neatly placed in boxes for easy storage and transportation.
- Three Years Warranty For any quality problems. If C100 has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Warranty: 3 years warranty
See On Amazon #9
AUTOOL Automotive Motorcycle 4 Cylinder Ultrasonic Wave Injector Cleaner Petrol Injection Tester Cleaning Kit Tester
Asin: B0B44ZVWJP | Ean: 6972697787134
【Ultrasonic Cleaning】The Injector Cleaning Machine Adopts Ultrasonic Powerful Cleaning Technology, Which Has A Strong Cleaning Ability And Can Completely Remove The Stubborn Carbon Deposits On The Fuel Injector..
【Digital Display】With The Help Of Microcomputer Control And Digital Display, The Equipment Makes Possible Automatic Cleaning, Testing Injectors And Real-Time Monitoring Of The Dynamic Values..
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Contact Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【Wide Application】The Fuel Injector Cleaner Machine Simulates Various Working Conditions Of The Engine And Can Clean And Inspect The Fuel Injectors Of Various Motorcycles. Main Functions: Ultrasonic Cleaning, Uniformity Detection, Atomization Observation, Tightness Test, Fuel Injection Volume Detection. The Injector Cleaner Kit Uses High-Quality Oil Pumps To Ensure Long-Term Stable Use..
【Microcomputer Control】Fuel Pressure Control Through Microcomputer Offers Stable Pressure Control And Large Adjustable Range, Which Is Suitable For All Egi Vehicles And Can Help To Achieve Automatic.
Features
- Why Need It The performance of the injector plays a vital role in the power of each engine. Poor fuel will cause the injector to work poorly, causing serious carbon deposits in the cylinder, accelerating cylinder barrel and piston ring wear, unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, and excessive emissions; in severe cases, the injector will be completely blocked . Damage to the engine.
- Microcomputer Control Fuel pressure control through microcomputer offers stable pressure control and large adjustable range, which is suitable for all EGI vehicles and can help to achieve automatic
- Ultrasonic Cleaning The injector cleaning machine adopts ultrasonic powerful cleaning technology, which has a strong cleaning ability and can completely remove the stubborn carbon deposits on the fuel injector.
- Wide Application The fuel injector cleaner machine simulates various working conditions of the engine and can clean and inspect the fuel injectors of various motorcycles. Main functions: ultrasonic cleaning, uniformity detection, atomization observation, tightness test, fuel injection volume detection. The injector cleaner kit uses high-quality oil pumps to ensure long-term stable use.
- Digital Display With the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values.
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
See On Amazon #10
Dual Modes EVAP Vacuum Automotive Smoke Machine Leak Detector Diagnostic Tester for All Vehicles
Asin: B08Z75G5L8 | Model: SDT205S | PartNumber: SDT205S | Ean: 0785249094514 | UPC: 785249094514
【Evap Detection】American Cars That Began Production In 1996 Are Equipped With Evap Service Ports; In Most American Cars, The Evap Service Port Is Usually Located In The Engine Compartment, But The Evap Service Port Of Some Special Models May Be Located In Other Locations. Open The Plastic Cover Of The Evap Service Port, Then Use The Spool Wrench To Remove The Check Valve Clockwise, Then Install The Evap Service Port Adapter, And Introduce Smoke From The Port Into The Evap Leak Detection System..
【External Flow Meter】You Can Easily Control The Air Pressure, Because The Air Pressure Of Each Pipe In The Car Is Different. If The Air Pressure Is Too High, The Pipe Will Be Damaged, And If The Air Pressure Is Too Low, The Leak Will Not Be Detected. Therefore, The Flow Meter Is Very Important To Protect Your Detection System More Effectively. Make Testing Safer.
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Tell Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【External Pressure Gauge】You Can Observe The Barometer To More Accurately Determine Whether The Car Pipeline Is Leaking. If The Barometer Index Keeps Increasing, There Is No Problem With Your Car’S Pipeline. If The Barometer Index Keeps Decreasing, Your Car’S Pipeline Leaks Need To Be Repaired, And There Is A Barometer Test. Leakage Is Faster And More Accurate.
【Air Mode & Smoke Mode】Built-In Air Pump And Smoke Generator, So It Does Not Rely On Additional Air Machine, Perfect For Mobile Automotive Repair! The Smoke Can Be Produced Within 10 Seconds, Dramatically Reducing Diagnostic Time. Smoke Output Value: 6L/Min..
Features
- Why Need It For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
- Air Mode & Smoke Mode Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min.
- EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
- External Pressure Gauge You can observe the barometer to more accurately determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car s pipeline. If the barometer index keeps decreasing, your car s pipeline leaks need to be repaired, and there is a barometer test. Leakage is faster and more accurate
- External Flow Meter You can easily control the air pressure, because the air pressure of each pipe in the car is different. If the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected. Therefore, the flow meter is very important to protect your detection system more effectively. Make testing safer
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
See On Amazon #11
Fuel Injector Cleaner, C100 Automotive Non-dismantle Fuel Injector Cleaner Kit,1000ML 150PSI Fuel Injector Tester and Cleaner Fuel System Tool Set Machine for Petrol Cars
Asin: B071NJJS1C | Ean: 0602860600224 | UPC: 602860600224
【Working Pressure Adjustment】The Non-Dismantle Cleaner Autool C100 Has A Special Handling One-Way Valves To Seal Up Gas And Durable Pressure Regulating Valves. Adjustable Pressure Gauge Up To 150Psi.The Fuel Injector Cleaner Tool Kit Is Equipped With A Cleaning Canister With A Capacity Of 1,000 Ml, Made Of High-Pressure, High-Quality Stainless Steel, Resistant To Corrosion And Abrasion..
【Storage And Note】The Fuel System Cleaner Kit Is Equipped With A Heavy Blow Molded Plastic Box,Which Can Protect Products For Easy Transportation.Note:This Automotive Fuel Injector Cleaning Kit Is Only Suitable For Gasoline Engines, Not For Diesel Fuel Injectors And This Kit Does Not Contain Any Cleaning Fluid..
【3 Years Warranty】For Damage Caused By Non-Human Factors,Autool Promise To Resend Parts For Free Within 3 Years. For Any Needs,You Are Warmly Welcomed To Contact Us And We Will Get Back To You Asap Within 24 Hours..
【 Efi-Electrenic Fuel Injection System】There Two Types Of Electronic Fuel Injection System, Throttle Or Electronic Injection. One Engine With Fuel-Return Pipe, Another One Engine Without Fuel-Return Pipe.Throttle Model: The Way Of Connection Is The Same As Efi System, Just Adjust The Pressure Of The Air Source 1-5Psi..
【Multi -Adapter & Widely Application】The Fuel System Cleaner Tool Is Equipped With A Wide Range Of Adapters For Almost All Cars And Light Trucks In The Eu, Asia And The U.S.A. The Fuel Injector Cleaner Kit Is Of High Quality, The Main Parts And Fittings Are Made Of Brass, The Connecting Hose Is Made Of High-Quality Rubber Material, Which Is Tough, Corrosion-Resistant And Non-Leakage, And The Tubing Is Suitable For All Cleaning Fluids..
Features
- Upgraded Fuel Injector Cleaner Kit AUTOOL Fuel Injector Cleaner Kit with High and Low Pressure Cleaning Functions,It can non-disassembly cleaning of the fuel system. The Non-dismantle injector cleaning kit is suitable for cleaning fuel injectors, air intake system and three-way catalytic converter, which can quickly remove carbon deposits. This automotive injector cleaning kit is for gasoline engines only, not for diesel injectors.
- Multi -adapter & Widely application The fuel system cleaner tool is equipped with a wide range of adapters for almost all cars and light trucks in the EU, Asia and the U.S.A. The Fuel Injector Cleaner Kit is of high quality, the main parts and fittings are made of brass, the connecting hose is made of high-quality rubber material, which is tough, corrosion-resistant and non-leakage, and the tubing is suitable for all cleaning fluids.
- Working Pressure Adjustment The non-dismantle cleaner Autool C100 has a special handling one-way valves to seal up gas and durable pressure regulating valves. Adjustable pressure gauge up to 150PSI.The Fuel Injector Cleaner Tool Kit is equipped with a cleaning canister with a capacity of 1,000 ml, made of high-pressure, high-quality stainless steel, resistant to corrosion and abrasion.
- EFI-Electrenic Fuel Injection System There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI.
- Storage and Note The fuel system cleaner kit is equipped with a heavy blow molded plastic box,which can protect products for easy transportation.Note:This automotive fuel injector cleaning kit is only suitable for gasoline engines, not for diesel fuel injectors and this kit does not contain any cleaning fluid.
- 3 years Warranty For damage caused by non-human factors,AUTOOL promise to resend parts for free within 3 years. For any needs,you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
See On Amazon #12
Automotive Smoke Leak Detector Tester EVAP Smoke Machine with Dual Mode
Asin: B09FYZBJD3 | Ean: 6972697783150
【Flow Meter & Pressure Gauge】According To The Pressure Of The Detection Pipeline, It Is Controlled With A Flowmeter To More Effectively Protect The Pipeline From Damage. By Observing The Pressure Gauge, You Can Determine Whether The Pipeline Is Leaking More Quickly And Accurately. Usually The Pressure Gauge Continues To Rise, Indicating That There Is No Problem With The Pipeline. If The Pressure Gauge Continues To Decrease, Explain That The Pipeline Leak Needs To Be Repaired..
【Wide Testing Range】Built-In Air Pump,The Smoke Leak Detector Can Do Smoke Testing Of Multiple Systems, Such As Evap Systems, Intake Systems, Cooling / Egr /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo Leaks.Applicable Cars, Motorcycles, Snowmobiles, Off-Road Vehicles, Atvs, Light Trucks And Speedboats Boats..
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Tell Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【Evap Detection】American Cars That Began Production In 1996 Are Equipped With Evap Service Ports; In Most American Cars, The Evap Service Port Is Usually Located In The Engine Compartment, But The Evap Service Port Of Some Special Models May Be Located In Other Locations. Open The Plastic Cover Of The Evap Service Port, Then Use The Spool Wrench To Remove The Check Valve Clockwise, Then Install The Evap Service Port Adapter, And Introduce Smoke From The Port Into The Evap Leak Detection System..
【Air Mode & Smoke Mode】Built-In Air Pump And Smoke Generator, So It Does Not Rely On Additional Air Machine, Perfect For Mobile Automotive Repair! The Smoke Can Be Produced Within 7-15 Seconds, Dramatically Reducing Diagnostic Time. Smoke Output Value: 1-6L/Min..
Features
- Why Need It Car Smoke Leak Detector is a professional auto pipe leak detect tool. It will help us position cars motorcycles leakage on the pipe systems quickly and exactly
- Air Mode & Smoke Mode Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 7-15 seconds, dramatically reducing diagnostic time. Smoke output value: 1-6L/min.
- Flow Meter & Pressure Gauge According to the pressure of the detection pipeline, it is controlled with a flowmeter to more effectively protect the pipeline from damage. By observing the pressure gauge, you can determine whether the pipeline is leaking more quickly and accurately. Usually the pressure gauge continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired.
- EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
- Wide Testing Range Built-in air pump,The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Dimensions: 6.00 x 10.00 x 6.00 inches
See On Amazon #13
AUTOOL Automotive Leak Detector Tool Cars Leak Locator Tester Car Pipe Leakage Tester Support Evap for All Vehicles
Asin: B07P1FRBNW | Ean: 9559054393039, 0733810044079 | UPC: 733810044079
【Wide Testing Range】Built-In Air Pump,The Smoke Leak Detector Can Do Smoke Testing Of Multiple Systems, Such As Evap Systems, Intake Systems, Cooling / Egr /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo Leaks.Applicable Cars, Motorcycles, Snowmobiles, Off-Road Vehicles, Atvs, Light Trucks And Speedboats Boats..
【External Pressure Gauge】You Can Observe The Barometer To More Accurately Determine Whether The Car Pipeline Is Leaking. If The Barometer Index Keeps Increasing, There Is No Problem With Your Car’S Pipeline. If The Barometer Index Keeps Decreasing, Your Car’S Pipeline Leaks Need To Be Repaired, And There Is A Barometer Test. Leakage Is Faster And More Accurate.
【Built-In Air Pump】Customers Do Not Need To Purchase Additional Air Pumps, We Use High-Quality Materials, After Many Tests, Please Rest Assured To Use. You Can Save More Time And Money.
【Evap Detection】American Cars That Began Production In 1996 Are Equipped With Evap Service Ports; In Most American Cars, The Evap Service Port Is Usually Located In The Engine Compartment, But The Evap Service Port Of Some Special Models May Be Located In Other Locations. Open The Plastic Cover Of The Evap Service Port, Then Use The Spool Wrench To Remove The Check Valve Clockwise, Then Install The Evap Service Port Adapter, And Introduce Smoke From The Port Into The Evap Leak Detection System..
Features
- Why Need It For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
- EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
- Wide Testing Range Built-in air pump,The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
- Built-in Air Pump Customers do not need to purchase additional air pumps, we use high-quality materials, after many tests, please rest assured to use. You can save more time and money
- External Pressure Gauge You can observe the barometer to more accurately determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car s pipeline. If the barometer index keeps decreasing, your car s pipeline leaks need to be repaired, and there is a barometer test. Leakage is faster and more accurate
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Weight: 0.00 pounds
See On Amazon #14
Fuel Injector Cleaner Tester,CT160 Automotive Injection Systems Cleaners,Fuel System Cleaners Testers, 4-Cylinder Petrol Car Nozzle Heated Cleaning 110V/220V
Asin: B08VWP8WP8 | Model: CT160 Fuel Injector Cleaner Tester | PartNumber: CT160 Fuel Injector Cleaner Tester | Ean: 0793869151203 | UPC: 793869151203
🚓[ Compact/Lightweight/Portable]: Ct160 Fuel Injector Cleaner Only Weighs 8Kg, Allowing To Carry Around. With 2000Ml Large Capacity Ultra Cleaning Tank, All Injectors Can Be Cleaned At One Time, Which Save Much Time And More Efficient..
🚓[Three Years Warranty, Lifetime Maintenance]: For Damage Caused By Non-Human Factors, We Promises To Resend Parts For Free Within 3 Years. For Any Needs, You Are Warmly Welcomed To Contact Us And We Will Get Back To You Asap Within 24 Hours..
🚓[Microcomputer Control]: Fuel Pressure Control Through Microcomputer Offers Stable Pressure Control And Large Adjustable Range, Which Is Suitable For All Egi Vehicles And Can Help To Achieve Automatic.
🚓[Digital Display]: Ct160 Injector Cleaner Tester With The Help Of Microcomputer Control And Digital Display, The Equipment Makes Possible Automatic Cleaning, Testing Injectors And Real-Time Monitoring Of The Dynamic Values..
🚓[Environmental Friendly& Widely Use]: The Used Cleaning Fluid And Testing Fluid Can Be Easily Recovered. Support Most Of The Automobile And Motorcycles In The Market. Applicable Voltage Is Compatible With 110V Or 220V..
🚓[9 Kinds Of Fuel Injector Tests]: Ct160 Fuel Injector Cleaner Is Capable Of Various Testing, Including 2-Idle Speed Test, 3-Medium Speed Test, 4-High Speed Test, 5-Accelerating Test, 6-Variable Speed Test, 7-Leakage Test, 8-Idle Spray Test, 9-Medium Spray Test, 10-High Spray Volume Test..
Features
- [Ultrasonic Cleaning with Heating the Fluid]: Different from others, CT160 is able to heat the cleaning fluid, which can improve a lot on cleaning effect. With that advantage, ultrasonic cleaning can be more powerful to remove the attachments and internal blockages on the injectors.
- [9 Kinds of Fuel Injector Tests]: CT160 Fuel injector Cleaner is capable of various testing, including 2-idle speed test, 3-medium speed test, 4-high speed test, 5-accelerating test, 6-variable speed test, 7-leakage test, 8-idle spray test, 9-medium spray test, 10-high spray volume test.
- [ Compact/Lightweight/Portable]: CT160 Fuel injector Cleaner only weighs 8KG, allowing to carry around. With 2000ML large capacity ultra cleaning tank, all injectors can be cleaned at one time, which save much time and more efficient.
- [Environmental Friendly& Widely Use]: The used cleaning fluid and testing fluid can be easily recovered. Support most of the automobile and motorcycles in the market. Applicable voltage is compatible with 110V or 220V.
- [Microcomputer Control]: Fuel pressure control through microcomputer offers stable pressure control and large adjustable range, which is suitable for all EGI vehicles and can help to achieve automatic
- [Digital Display]: CT160 Injector Cleaner Tester with the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values.
- [Three Years Warranty, Lifetime Maintenance]: For damage caused by non-human factors, we promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
- See more on Amazon...
Brand: QPKING | Manufacturer: AUTOOL
See On Amazon #15
AUTOOL Automotive 6-Cylinder 110V GDI Fuel Injector Cleaning Machine,EFI Fuel Injector Cleaner Kit Tool,FSI Fuel Injector Tester Cleaner for All Petrol and Car Motorcycle
Asin: B0C9PSVXMX | Model: CT500 | PartNumber: CT500 | Ean: 6972697788568
【Drawer Design】The Machine Incorporates A Convenient Drawer At The Bottom, Featuring Labeled Compartments For Organized Storage Of Components, Ensuring Easy And Systematic Access..
【Three-Year Warranty】Autool Provides A Three-Year Warranty And Lifetime Maintenance Services, Guaranteeing Free Replacement Of Parts For Non-Human-Caused Damages. Our Dedicated Team Is Available 24/7 To Promptly Assist You With Any Inquiries Or Support Needs..
【Leakage Testing】Capable Of Evaluating The Sealing Performance And Detecting Potential Leaks In Fuel Injectors Under High-Pressure Conditions..
【Spray Value Test】Accurately Measures The Amount Of Fuel Injected By The Injectors Under Specific Operational Parameters, Enabling Precise Diagnostics..
【Output Voltage Configuration】Supporting Testing Of Fuel Injectors With Driving Voltages Of 12V, 70V, And 120V, Tailored To Different Injector Types For Optimal Testing Results..
【Sprayability Observation】Offering Comprehensive And Meticulous Observation Of The Nozzle's Spray Atomization, Facilitating Precise Analysis Of Fuel Dispersion..
【Electronic Control Technology】Employing Advanced Electronic Pressure Regulation Control Technology, Ensuring Stable Oil Pressure With A Wide Adjustable Range..
【Pressure Gauge Design】Featuring A High-Resolution Tft Color Display Screen, Providing Clear And Detailed Data Visualization In Diverse Environmental Conditions.Equipped With A Precision Pressure Gauge On The Control Panel, Allowing For Real-Time Monitoring Of The Device's Working Pressure To Ensure Consistent Performance And Effectiveness..
【Efficient Six-Cylinder Design】Designed For Maximum Efficiency, This Machine Allows Simultaneous Cleaning And Testing Of Up To Six Fuel Injectors. This Convenient Feature Enables Comparative Analysis For Precise Diagnostics Of Injector Performance..
Features
- Advanced Control Panel The control panel features an intelligent design, incorporating a vibrant TFT color display screen, user-friendly function selection buttons, voltage selection buttons, work pressure control buttons, and a precise pressure gauge. The layout is simply organized for effortless operation.
- Efficient Six-Cylinder Design Designed for maximum efficiency, this machine allows simultaneous cleaning and testing of up to six fuel injectors. This convenient feature enables comparative analysis for precise diagnostics of injector performance.
- Drawer Design The machine incorporates a convenient drawer at the bottom, featuring labeled compartments for organized storage of components, ensuring easy and systematic access.
- Electronic Control Technology Employing advanced electronic pressure regulation control technology, ensuring stable oil pressure with a wide adjustable range.
- Output Voltage Configuration Supporting testing of fuel injectors with driving voltages of 12V, 70V, and 120V, tailored to different injector types for optimal testing results.
- Sprayability Observation Offering comprehensive and meticulous observation of the nozzle's spray atomization, facilitating precise analysis of fuel dispersion.
- Leakage Testing Capable of evaluating the sealing performance and detecting potential leaks in fuel injectors under high-pressure conditions.
- Spray Value Test Accurately measures the amount of fuel injected by the injectors under specific operational parameters, enabling precise diagnostics.
- Pressure Gauge Design Featuring a high-resolution TFT color display screen, providing clear and detailed data visualization in diverse environmental conditions.Equipped with a precision pressure gauge on the control panel, allowing for real-time monitoring of the device's working pressure to ensure consistent performance and effectiveness.
- Three-Year Warranty AUTOOL provides a three-year warranty and lifetime maintenance services, guaranteeing free replacement of parts for non-human-caused damages. Our dedicated team is available 24/7 to promptly assist you with any inquiries or support needs.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Dimensions: 22.05 x 19.69 x 15.75 inches
Warranty: 3 years warranty
See On Amazon #16
AUTOOL Fuel Pressure Gauge Digital Fuel Pressure Tester Kit, 0-426PSI, 0~29bar Fuel Injection Pressure Test Tools Set with Test Hoses & 11 Connectors, Backlit Display
Asin: B0CF1P2MBP | Model: PT630 | PartNumber: PT630 | Ean: 6972697788681
【Easy Operation】Click The Lock Screen Button To Lock The Current Screen And Hold The Data. Fuel Pressure Tester Kit With Quick Release Button, Long Press To Zero The Unit Pressure. The Measuring Probe Of The Gauge Hose Can Be Quickly Connected With Most Adapters, Saving Time And Improving Efficiency..
【Three Years Warranty】For Any Quality Problems. If Pt630 Has Any Defect, We Will Provide New Replacement Or Solutions For Our Customers Until Satisfaction Without Delay, And Provides Lifetime Technical Support. For Any Needs, You Are Warmly Welcomed To Contact Us And We Will Get Back To You Asap Within 24 Hours..
【Riveted Copper Material】Included With Plenty Of Adapters To Fit Variety Of Gasoline Engines. Adapters Constructed From High-Quality Brass Resist Rust And Corrosion, Rugged And Long-Lasting. Extra Long 78.7'' Hose Adopt Reinforced Rubber, Withstand Pressure, Temperature, And Torsion..
【Smart Digital Gauge】The 2.8-Inch Backlit Display Shows Clear, Accurate Data In Both Bright And Dim Light. Digital Compression Gauge Has 0.01 Display Resolution Instead Of Normal 1Psi Display Resolution Compression Tester..
Features
- Easy Instant Read Measures real-time pressure values, maximum and minimum pressure values and differential pressure values of engine oil, as well as measurement time. With 3 different kinds of numerical units in PSI, Bar, and KG/CM , easy to control with buttons. The measurement range is 0-426.6PSI; 0-29.4BAR; 0-30KG/CM .
- Smart Digital Gauge The 2.8-inch backlit display shows clear, accurate data in both bright and dim light. Digital compression gauge has 0.01 display resolution instead of normal 1PSI display resolution compression tester.
- Easy Operation Click the lock screen button to lock the current screen and hold the data. Fuel pressure tester kit with quick release button, long press to zero the unit pressure. The measuring probe of the gauge hose can be quickly connected with most adapters, saving time and improving efficiency.
- Riveted Copper Material Included with plenty of adapters to fit variety of gasoline engines. Adapters constructed from high-quality brass resist rust and corrosion, rugged and long-lasting. Extra long 78.7'' hose adopt reinforced rubber, withstand pressure, temperature, and torsion.
- Three Years Warranty For any quality problems. If PT630 has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Dimensions: 4.33 x 10.23 x 8.26 inches
See On Amazon #17
AUTOOL GDI Fuel Injector Cleaner & Tester 110V Ultrasonic Wave Fuel Injection Leakage Tester 6-Cylinder Automotive Fuel Injector Cleaning Machine
Asin: B0B42HMYQN | Ean: 6972697787127
【12V, 70V, 120V】 Using The Latest And Unique Gdi Injector Driver Software, Autool Ct400 6-Cylinder Fuel Injector Cleaning Machine Can Drive 12V, 70V, 120V High Pressure Injectors，Compared With Other Cleaning Machines And Testing Machines, Autoo Ct400 Is Equipped With A Cooling Fan And Thermal Protection, With A Power Of 60W. Equipped With A Cooling Fan To Continuously Cool The Machine During Use, Avoid Damage To The Machine Due To Overheating, Thereby Prolonging The Use Time Of The Machine.
【Microcomputer Technology】 Autool Ct400 Fuel Injector Cleaning Detector Adopts Ultrasonic Cleaning Technology And Microcomputer Oil Pressure Closed-Loop Control Cleaning Detection Technology. It Can Simulate Various Working Conditions Of The Engine, Clean And Test The Fuel Injectors Of Various Motorcycles, And Can Also Clean The Fuel Injectors And Fuel Supply Systems Of Motorcycles Without Disassembly..
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Contact Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【Smart Design】 Come With High-Definition Digital Control Panel Display, Easy To Operate And Learn. With The Help Of The Bright Led Background Light, You Can Clearly Observe The Various Working Conditions Of The Fuel Injector. Equipped With A Test Liquid Discharge Valve, The Content Of The Test Liquid Can Be Clearly Observed. It Can Also Be Recycled And Reused..
【Gdi Design】 Adopts Latest Gdi Design, It Is Not Only Can Be Used To Clean And Test Standard Injectors, But Also To Implement Gdi Injectors, Autool Ct400 Gdi Fuel Injector Cleaner And Tester Is The Newest Version Of Fuel Injector Cleaner Series. Compatible With Mercedes-Benz, Bmw, Audi, Porsche, Ford, And Other Direct Injection Engines..
Features
- Why Need It The performance of the injector plays a vital role in the power of each engine. Due to the fuel quality, the injector cannot work normally, causing serious carbon deposits in the cylinder; accelerating the cylinder bore and piston ring, causing unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, excessive emissions, and complete blockage of the injector. Cause damage to the engine, so the injector should be cleaned regularly.
- GDI Design Adopts latest GDI design, it is not only can be used to clean and test standard injectors, but also to implement GDI injectors, AUTOOL CT400 GDI fuel injector cleaner and tester is the newest version of fuel injector cleaner series. Compatible with Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines.
- 12V, 70V, 120V Using the latest and unique GDI injector driver software, AUTOOL CT400 6-cylinder fuel injector cleaning machine can drive 12V, 70V, 120V high pressure injectors Compared with other cleaning machines and testing machines, AUTOO CT400 is equipped with a cooling fan and thermal protection, with a power of 60w. Equipped with a cooling fan to continuously cool the machine during use, avoid damage to the machine due to overheating, thereby prolonging the use time of the machine
- Smart Design Come with high-definition digital control panel display, easy to operate and learn. With the help of the bright LED background light, you can clearly observe the various working conditions of the fuel injector. Equipped with a test liquid discharge valve, the content of the test liquid can be clearly observed. It can also be recycled and reused.
- Microcomputer Technology AUTOOL CT400 fuel injector cleaning detector adopts ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning detection technology. It can simulate various working conditions of the engine, clean and test the fuel injectors of various motorcycles, and can also clean the fuel injectors and fuel supply systems of motorcycles without disassembly.
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
See On Amazon #18
AUTOOL Ultrasonic Wave Fuel Injector Cleaner and Tester Automotive Fuel Injection Systems Cleaning Tools for All Petrol 6 Cylinder Vehicles Motorcycle
Asin: B07NY92TKY | Model: CT-200 | PartNumber: CT-200 | Ean: 0602860606080, 0733810044093 | UPC: 733810044093, 602860606080
【Automatic Cleaning And Testing】Fuel Pressure Control Through Microcomputer Offers Stable Pressure Control And Largeadjustable Range, Which Is Suitable For All Egi Vehicles And Can Help To Achieve Automatic Cleaning And Testing Of Injectors..
【Reverse Flush】Uniformity/Sprayability Test: To Test The Uniformity Of Injecting Amount Of Each Injector,And To Monitor The Spraying Status Of Each Injector With The Help Of Backlight. This Test Is Also For Reverse Flush..
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Contact Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【Adopting Humanization Design】Automatic Fuel Draining Through Preset Programs For Some Test Items. Test Liquid/Detergent Can Also Be Drained By Pushing A Button On The Control Panel After The Test.Can Make The System Pressure Fast Restored To The Default,The Unit Is Equipped With Various Adaptors And Couplers That Facilitate Cleaning On The Injectors On Vehicle..
【Digital Display】With The Help Of Microcomputer Control And Digital Display, The Equipment Makes Possible Automatic Cleaning, Testing Injectors And Real-Time Monitoring Of The Dynamic Values..
Features
- Why Need It The performance of the injector plays a vital role in the power of each engine. Due to the fuel quality, the injector cannot work normally, causing serious carbon deposits in the cylinder; accelerating the cylinder bore and piston ring, causing unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, excessive emissions, and complete blockage of the injector. Cause damage to the engine, so the injector should be cleaned regularly.
- Digital Display With the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values.
- Automatic Cleaning and Testing Fuel pressure control through microcomputer offers stable pressure control and largeadjustable range, which is suitable for all EGI vehicles and can help to achieve automatic cleaning and testing of injectors.
- Adopting Humanization Design Automatic fuel draining through preset programs for some test items. Test liquid/detergent can also be drained by pushing a button on the control panel after the test.can make the system pressure fast restored to the default,The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
- Reverse Flush Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector,and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Dimensions: 18.50 x 19.30 x 19.09 inches
See On Amazon #19
Fuel Cleaning Tools C100 Automotive Fuel Injector Cleaner CFS Series Fuel Injection Systems On-vehicle Cleaning Assistant Fuel Injector Cleaner 1000ML 150PSI With Various Connectors & Carrying Case
Asin: B0714569MP | Model: 8542038535 | PartNumber: 8542038535 | Ean: 0707273303905, 0712383649225 | UPC: 712383649225, 707273303905
🚘【Easy To Operate】- This Fuel Injector Cleaner Kit Is A Free Disassembly Cleaning Tool That Is Easy To Use, And You Can Use It Without The Knowledge Of Car Assembling..
🚘【Wide Range Of Application】-The Injector Clean Kits Of C100 Include Many Different Kinds Of Adapter, Cover Almost All The Eu,Asia,Usa Cars And Light Trucks. Non-Dismantle Injector Throttle And Fuel System..
🚘【Powerful Functions】-The System Is Not Only Characteristic Of High And Low Pressure Cleaning Function. The Non-Dismantle Fuel Injector Cleaner Kit Is Used To Clean The Injectors, Intake System And Three-Way Catalytic Converter And Be Cleaned Without Disassembling The Car. But Please Note That It Is Only For Gasoline Injector, Not For Diesel Injector..
🚘【Various Application】- Various Connectors To Fit Most Cars. This Injector Cleaning Kit Includes Many Adapters, Covering Almost All The Eu, Asia, Usa Cars, And Light Trucks..
🚘【Efi-Electrenic Fuel Injection System】-There Two Types Of Electronic Fuel Injection System, Throttle Or Electronic Injection. One Engine With Fuel-Return Pipe, Another One Engine Without Fuel-Return Pipe.Throttle Model: The Way Of Connection Is The Same As Efi System, Just Adjust The Pressure Of The Air Source 1-5Psi..
🚘【Multi-Functional Kit】- Our Cleaner Tool Features High And Low-Pressure Cleaning Function And The Whole Fuel System, Including Throttle Valve, Fuel Nozzle, And Combustion Chamber..
🚘【3-Year Warranty】- For Damage Caused By Non-Human Factors, We Promise To Resend Parts For Free Within 3 Years. For Any Needs, You Are Warmly Welcomed To Contact Us And We Will Get Back To You Asap Within 24 Hours..
🚘【Professional Valves】- Multifunctional Valves In This Fuel Injector Tester Are For Fluid Adding And Gas Releasing. Rotate To Add Fluid, Gas Releasing Speed Could Be Controlled With Different Force Levels..
Features
- ANTI-CORROSION - C100 fuel injector tester includes anti-corrosion, anti-friction connectors for fast-connection. Anti-friction oil tubes are suitable for all cleaning fluid.
- PROFESSIONAL VALVES - Multifunctional valves in this fuel injector tester are for fluid adding and gas releasing. Rotate to add fluid, gas releasing speed could be controlled with different force levels.
- EASY TO OPERATE - This fuel injector cleaner kit is a free disassembly cleaning tool that is easy to use, and you can use it without the knowledge of car assembling.
- MULTI-FUNCTIONAL KIT - Our cleaner tool features high and low-pressure cleaning function and the whole fuel system, including throttle valve, fuel nozzle, and combustion chamber.
- VARIOUS APPLICATION - Various connectors to fit most cars. This injector cleaning kit includes many adapters, covering almost all the EU, Asia, USA cars, and light trucks.
- EFI-ELECTRENIC FUEL INJECTION SYSTEM -There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI.
- WIDE RANGE OF APPLICATION -The injector clean kits of C100 include many different kinds of adapter, cover almost all the EU,Asia,USA cars and light trucks. Non-Dismantle injector Throttle and fuel system.
- POWERFUL FUNCTIONS -The system is not only characteristic of high and low pressure cleaning function. The non-dismantle fuel injector cleaner kit is used to clean the injectors, intake system and three-way catalytic converter and be cleaned without disassembling the car. But please note that it is only for gasoline injector, not for diesel injector.
- 3-YEAR WARRANTY - For damage caused by non-human factors, we promise to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
- See more on Amazon...
Brand: QPKING | Manufacturer: Autool
Weight: 8.82 pounds
See On Amazon
Looking For Something Else?
Search