JDiag Universal Gas Can Spout Replacement Kit, Flexible Pour Nozzle with Gasket, Stopper Caps, Collar Caps, Stripe Cap, Spout Kit for Water Jugs and Old Can, Update Your Old Can (1 Pack)
Asin: B09W5P39YL | Ean: 0751717551032 | UPC: 751717551032
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【High Quality】 : These Can Spouts Are Made Of "High Density Polyethylene"(Hdpe) Plastic, Which Are Bendable And Durable..
【1 Sets】: We Offer 1 Set Of Spout Kits, Which Can Meet Most Pour Spout Replacement Needs. Package Include - 1 * White Spouts With Rubber Gaskets, 1 * Spout Caps, 2 * Screw Collar Caps (1 Coarse Thread And 1 Fine Thread), 2 * Rear Vent Caps. Note: Do Not Drill A Hole In The Can For The Vent Until You Are Sure The Spout Is Going To Work For You..
【Save Money】: Use Gas Can Spouts As Part Replacements Instead Of Buying A New Gas Can. Save Money From Your Daily Life!.
【Easier To Pour】: The Flexible Design Of Spout Makes It Easier To Pour Gas. You Can Adjust The Angle To Pour Gas Into Tank Simply And Easily..
Features
- No More Spilling : With this nozzle to pour the liquid, you will never spill gas all over yourself and your equipment again. And the stopper cap could be a spout cap for storaging or transporting the can.
- Easier to Pour : The flexible design of spout makes it easier to pour gas. You can adjust the angle to pour gas into tank simply and easily.
- High Quality : These can spouts are made of High Density Polyethylene(HDPE) plastic, which are bendable and durable.
- Save Money : Use gas can spouts as part replacements instead of buying a new gas can. Save money from your daily life!
- 1 Sets : We offer 1 set of spout kits, which can meet most pour spout replacement needs. Package include - 1 * White Spouts with rubber gaskets, 1 * Spout Caps, 2 * Screw Collar Caps (1 coarse thread and 1 fine thread), 2 * Rear Vent Caps. NOTE: DO NOT drill a hole in the can for the vent until you are sure the spout is going to work for you.
- See more on Amazon...
Brand: JDiag
Dimensions: 0.39 x 5.91 x 0.79 Inches
See On Amazon Similar To JDiag Universal Gas Can Spout
#1
Gas Can Spout Replacement, Gas Can Nozzle, (3 Kit-Yellow) Suitable for Most 1/2/5/10 Gal Oil Cans. Gas Spout Replacement, Fuel Can Spout, Gas Tank Nozzle. The tube is soft and flexible to use
Asin: B0CDDQYDJ9
Anti-Overflow Design, (Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Can Spout Cap Is Hexagonal) The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down.
Simple To Install, Each Set Of Products Includes, 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread) 3 Yellow Spouts And Rubber Gaskets, 3 Nozzle Caps With Threads, 2 Kinds Of Gas Can Vent Caps, And The Drill Bit Required To Install The Gas Discharge Cap. During The Installation And Use Process, If You Need Assistance, You Can Contact Us, And We Will Serve You As Quickly As Possible.
Can Cover More Oil Cans, We Offer Two Types Of Gas Can Vent Caps, (Gas Can Vent Caps-A) Is Used For Oil Cans Without A Vent At The End Of The Oil Can, You Only Need Simple Drilling And Installation To Use. (Gas Can Vent Caps-B) Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps.
These Kits Are Made Of High Quality Hdpe Material. The Hoses Are Molded In One Piece, With No Steps For Secondary Connections That Will Not Compromise The Toughness And Strength Of The Hose. In Use You Can Bend Freely Without Breaking. Thicker And Widened Rubber Gaskets, Can Better Fit The Bottle Cap, Prevent Liquid Leakage When Refueling.
Features
- Gas Can Spout Replacement, The upgraded gas can spout kit is more compatible and the length of the hose is longer. Oil jug mouth sizes from 1.7in-1.82in both can be used. The total length of the hose is 8.1in, which is more convenient and flexible to use. Please measure your oil cans mouth size before purchasing
- These kits are made of high quality HDPE material. The hoses are molded in one piece, with no steps for secondary connections that will not compromise the toughness and strength of the hose. In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling
- Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down
- Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps
- Simple to install, Each set of products includes, 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible
- See more on Amazon...
Brand: ZORYILUO | Manufacturer: FOANRIY
See On Amazon #2
EZ-POUR Gas Can Spout Replacement Multi-Use For Deluxe Gas Cans and Water Jugs (Pack of 1) - 1, 2, 5 Gallon HI-FLO System with Extension, Flame Arrestor, Flexible Gas Can Nozzle for Jerry Cans
Asin: B00YP3YTXM | Model: EZ Pour - 30051 | PartNumber: EZ Pour - 30051 | Ean: 0721947607793, 0857413003032, 0653395314438, 0827165671964, 5207442859851, 7147905921191 | UPC: 827165671964, 721947607793, 857413003032, 653395314438
Easy-To-Assemble, Revitalizing Gas Cans With Confidence – Say Goodbye To Headaches, Our Hassle-Free Solution Allows Anyone To Revitalize Their Existing Gas Cans And Water Jugs. Ez-Pour Flexible Replacement Is So Versatile. Whether It's Gas Nozzles For Gas Cans, A Diesel Fuel Can Spout, Or A Heavy-Duty Gas Spout, Our Effortless Kit Has Only A Few Easy-To-Identify Components That Will Restore Your Old Gas Can To Its Former Glory. Includes One 8 Inch Hi-Flo Spout And One 8 Inch Extension!.
Eradicate Fuel Spills With Confidence - Bid Farewell To Messy Fuel Spillage With Our Sturdy Gas Spout Replacement. Designed With Your Convenience In Mind, It Includes A Robust Cap, Ensuring Secure And Spill-Free Fuel Transportation And Storage. Whether You're Revitalizing An Older Water Jug Or Seeking A Universal Gas Can Spout Upgrade, The Ez-Pour Rigid Spout Replacement Is The Ultimate Solution. No Worrisome Leaks, Just An Efficient Refueling Experience With Our Top-Tier Spout For Gas Can..
Compatible With A Wide Range Of Gas Cans And Water Jugs – Our Spout Will Seamlessly Fit Most Water Jugs And Gas Cans Including Popular Brands Like Blitz, Briggs Stratton, Eagle, Essence, Gott, Igloo, Midwest, Rubbermaid, And Scepter. Less Hassle Searching For Specific Gas Can Spouts; Our Gas Can Spout Ensures Compatibility For A Consistent Experience Across Various Containers. We’Ve Designed This Replacement Gas Can Spout Kit For Quick Assembly Because Your Time Matters..
A Lightweight & Durable Gas Can Spout Kit - Easily Attach Our Spout For Jerry Cans To Most Gas Cans And Water Jugs For Keeping Spare Gasoline Or Completing Chores For Your Home Or Farm. With This Gas Spout Kit, You Can Have Your Old Gas Cans Looking And Feeling Like New. This Kit Is A Unique Spout, One 8 Inch Hi-Flo Spout And Another 8" Spout Extension For Those Hard-To-Reach Tanks. A 1/2” Replacement Push-In Vent, Filter Screen, And Second Base Cap To Fit Additional Cans Are Also Included..
Features
- LONG & FLEXIBLE UNIVERSAL GAS CAN SPOUT REPLACEMENT - Unlike other gas can replacement parts that are cheap and require replacement again and again EZ POUR Gas Can Spout made with extra-dense material won t crack in the cold. This single gas cap spout is designed to ensure a fast flow letting you spend less time in the cold and more time getting to where you need to go! Unleash the power of endurance and versatility with our gas can nozzle replacement, ensuring extended equipment lifespan.
- A LIGHTWEIGHT & DURABLE GAS CAN SPOUT KIT - Easily attach our spout for jerry cans to most gas cans and water jugs for keeping spare gasoline or completing chores for your home or farm. With this gas spout kit, you can have your old gas cans looking and feeling like new. This kit is a unique spout, one 8 inch HI-FLO spout and another 8 Spout Extension for those hard-to-reach tanks. A 1/2 replacement push-in vent, filter screen, and second base cap to fit additional cans are also included.
- EASY-TO-ASSEMBLE, REVITALIZING GAS CANS WITH CONFIDENCE Say goodbye to headaches, our hassle-free solution allows anyone to revitalize their existing gas cans and water jugs. EZ-POUR Flexible Replacement is so versatile. Whether it's gas nozzles for gas cans, a diesel fuel can spout, or a heavy-duty gas spout, our effortless kit has only a few easy-to-identify components that will restore your old gas can to its former glory. Includes one 8 inch HI-FLO Spout and one 8 inch extension!
- COMPATIBLE WITH A WIDE RANGE OF GAS CANS AND WATER JUGS Our spout will seamlessly fit most water jugs and gas cans including popular brands like Blitz, Briggs Stratton, Eagle, Essence, Gott, Igloo, Midwest, Rubbermaid, and Scepter. Less hassle searching for specific gas can spouts; our gas can spout ensures compatibility for a consistent experience across various containers. We ve designed this replacement gas can spout kit for quick assembly because your time matters.
- ERADICATE FUEL SPILLS WITH CONFIDENCE - Bid farewell to messy fuel spillage with our sturdy gas spout replacement. Designed with your convenience in mind, it includes a robust cap, ensuring secure and spill-free fuel transportation and storage. Whether you're revitalizing an older water jug or seeking a universal gas can spout upgrade, the EZ-POUR rigid spout replacement is the ultimate solution. No worrisome leaks, just an efficient refueling experience with our top-tier spout for gas can.
- See more on Amazon...
Brand: EZ-POUR | Manufacturer: EZ-POUR Store
Dimensions: 13.00 x 13.00 x 7.00 Inches | Weight: 0.20 pounds
Warranty: lifetime
See On Amazon #3
Gas Can Spout Replacement, Anti-Spill Gas Can Nozzle Replacement, 2-Kit Gas Can Spouts No Leaky, Upgraded Replacement Gas Can Spout with Flexible Nozzle, Gas Can Vent, Fit for Most 1/2/5/10 Gal Can
Asin: B0CFXBC4DT
No-Spill Design: Our Gas Tank Nozzle Incorporates A No-Spill Design That Renders A Mess-Free Refueling Experience. The Gas Can Spout Tubes And Caps Are Threaded. The Cap Features A Rubber Sealing Ring Inside. Simply Tighten The Cap(The Hexagonal One) After Use, And Even During Transportation, There Will Be No Oil Spill..
Effortless Installation: Installation Is A Breeze! Each Replacement Gas Spouts Kit Includes Everything You Need: 4 Screw Collar Spouts Caps (2 Coarse Thread & 2 Fine Thread), 2 Spouts Hoses With Rubber Gaskets, 2 Threaded Nozzle Caps, 2 Types Of Gas Can Vent Caps, And Even The Drill Bit Required For The Installation Of The Vent Cap-A. If You Require Any Assistance During The Installation Or Usage Process, We Are Always Ready To Help, Ensuring Prompt And Efficient Service..
Versatility At Its Best: Our Gas Can Spouts Are Designed To Cover A Wide Range Of Cans. We Offer Two Types Of Gas Can Vent Caps To Accommodate Different Needs. Vent Cap A: Perfect For Oil Cans Without A Vent At The End And Requires A Simple Drilling And Installation Process. Vent Cap B: Suitable For Replacement On Barrels With A Vent Cap At The Top..
Uncompromising Quality: Crafted With High-Quality Hdpe Material, Our Replacement Gas Can Spout Kit Guarantees Exceptional Durability. Seamlessly-Molded Hoses Eliminate Any Possibility That Could Compromise Toughness And Strength. Bend The Hoses In Whatever Way You Want, And They Will Not Break..
Features
- ENHANCED COMPATIBILITY AND CONVENIENT LENGTH: Cyluer gas can spout replacement kit boasts superior compatibility, suitable for most 1/2/5/10 gallon gas cans, fitting oil jug mouths ranging from 1.7in to 1.82in. The length of the hose has been extended to 8.1in, ensuring greater convenience and flexibility.
- UNCOMPROMISING QUALITY: Crafted with high-quality HDPE material, our replacement gas can spout kit guarantees exceptional durability. Seamlessly-molded hoses eliminate any possibility that could compromise toughness and strength. Bend the hoses in whatever way you want, and they will not break.
- NO-SPILL DESIGN: Our gas tank nozzle incorporates a no-spill design that renders a mess-free refueling experience. The gas can spout tubes and caps are threaded. The cap features a rubber sealing ring inside. Simply tighten the cap(the HEXAGONAL one) after use, and even during transportation, there will be no oil spill.
- VERSATILITY AT ITS BEST: Our gas can spouts are designed to cover a wide range of cans. We offer two types of gas can vent caps to accommodate different needs. Vent cap A: Perfect for oil cans WITHOUT a vent at the end and requires a simple drilling and installation process. Vent cap B: Suitable for replacement on barrels WITH a vent cap at the top.
- EFFORTLESS INSTALLATION: Installation is a breeze! Each replacement gas spouts kit includes everything you need: 4 screw collar spouts caps (2 coarse thread & 2 fine thread), 2 spouts hoses with rubber gaskets, 2 threaded nozzle caps, 2 types of gas can vent caps, and even the drill bit required for the installation of the vent cap-A. If you require any assistance during the installation or usage process, we are always ready to help, ensuring prompt and efficient service.
- See more on Amazon...
Brand: Cyluer
See On Amazon #4
Stens 765-510 Fuel Can Spout Kit, CARB Approved, Fast flow rate, Automatic stop, Leak Proof, 3 Height, 3 Width, 10 Depth
Asin: B073JJX64N | Model: 4240 | PartNumber: 4240 | Ean: 0079223042401 | UPC: 079223042401
Specs: Spout Closes Automatically With An Airtight Seal.
Not Compatible With Greater Than 10% Ethanol Fuel.
Reliable Fitment: Please Verify This Is The Right Part Number Before Ordering. We Pride Ourselves In Providing Reliable Fitment Data So You Can Find The Right Part To Get The Job Done. If You Believe We Have An Error, We Would Be Grateful For Your Feedback..
30-Day Return Policy/1-Year Warranty: If Your Order Arrives And It’S Not Exactly What You Want, You May Return It Within 30 Days For A Refund. We Know That People Sometimes Order A Part And Then Discover It’S Not Exactly The One They Need For The Repair. We Understand And Want To Work With You. Just Make Sure The Item Is In Its Original Packaging And In Good Condition Free Of Damage. Outside Of 30-Days, We Will Replace It Anytime Within One Year Of Your Order..
Features
- COMPATIBILITY: Compatible with CARB Approved, Fast flow rate, Automatic stop
- 30-DAY RETURN POLICY/1-YEAR WARRANTY: If your order arrives and it s not exactly what you want, you may return it within 30 days for a refund. We know that people sometimes order a part and then discover it s not exactly the one they need for the repair. We understand and want to work with you. Just make sure the item is in its original packaging and in good condition free of damage. Outside of 30-days, we will replace it anytime within one year of your order.
- SPECS: Spout closes automatically with an airtight seal
- RELIABLE FITMENT: Please verify this is the right part number before ordering. We pride ourselves in providing reliable fitment data so you can find the right part to get the job done. If you believe we have an error, we would be grateful for your feedback.
- Not compatible with greater than 10% ethanol fuel
- See more on Amazon...
First Available: 08/16/2017
Brand: Stens | Manufacturer: Stens
Dimensions: 2.10 x 11.00 x 4.75 inches | Weight: 0.15 pounds
Warranty: AS LISTED
See On Amazon #5
CM Concepts Gas/Water Can Long Angled Spill-Free Spout Nozzle & Vent Replacement Kit w/Filter Screen Old Style (2)
Asin: B07DD1FZNY | Model: 50-5154 | PartNumber: 50-5154 | Ean: 0671839413714 | UPC: 671839413714
Push-In Vent Included For Faster And Safer Emptying; Use The Existing Hole Or Drill Your Own- 1/2"..
Each Kit Includes: (1) Flexible Spout, (1) Spout Cap, (1) "O" Ring Gasket And Filter Screen, (2) Base Caps, (1) Push-In Vent Cap (For Standard 1/2" Hole). 2 Kits Included..
1 Yr. Warranty Against Defects Under Normal Use. U.S Support..
Not Compatible With Non-Standard Cans Including Chilton, Craftsman, Anchor, No-Spill, F-Style Jugs & Racing Jugs Unless Used With Adapter. Fits Some Metal Cans-Those That Use A Standard-Size Base Cap Like Some Scepter & Briggs Models. Others May Require Adapter. Please Note This Is Not An Exhaustive List..
Maximum Compatibility: Designed In The U.S For U.S Cans. 2 Different Styles Of Base Caps (Approx. 1.75" D) Included For Maximum Compatibility. Fits Scepter, Gott, Briggs, Blitz, Rubbermaid, Midwest, Eagle, Igloo & Many Others..
Filter Screen/Flame Arrestor Included To Keep Debris/Dirt Out Of The Fuel Tank & Vapors Out Of The Can..
Features
- SPILL-FREE, EASY POURING: Unique long, angled design allows for easy, spill-free filling of lawn mowers, vehicles, boats & other gas-powered equipment.
- FILTER SCREEN/FLAME ARRESTOR included to keep debris/dirt out of the fuel tank & vapors out of the can.
- PUSH-IN VENT included for faster and safer emptying; use the existing hole or drill your own- 1/2.
- MAXIMUM COMPATIBILITY: Designed in the U.S for U.S cans. 2 different styles of base caps (approx. 1.75 D) included for maximum compatibility. Fits Scepter, Gott, Briggs, Blitz, Rubbermaid, Midwest, Eagle, Igloo & many others.
- 1 YR. WARRANTY against defects under normal use. U.S support.
- Not compatible with non-standard cans including Chilton, Craftsman, Anchor, No-Spill, F-Style jugs & racing jugs unless used with adapter. Fits SOME metal cans-those that use a standard-size base cap like some Scepter & Briggs models. Others may require adapter. Please note this is not an exhaustive list.
- Each kit includes: (1) flexible spout, (1) spout cap, (1) O ring gasket and filter screen, (2) base caps, (1) push-in vent cap (for standard 1/2 hole). 2 Kits included.
- See more on Amazon...
Brand: CM Concepts | Manufacturer: Gino Development
See On Amazon #6
No-Spill 6132 Gas Can Nozzle Assembly (ONLY fits No-Spill cans 2010 and later)
Asin: B0071S56W6 | Model: 765-110 | PartNumber: 765-110 | Ean: 0759176061321 | UPC: 759176061321
This Product Is Manufactured In United States.
Tip Size: 7/8" O.D..
Product Is Highly Durable And Very Easy To Use.
Features
- This product adds a great value
- Product is highly durable and very easy to use
- This product is manufactured in United States
- Tip Size: 7/8 O.D.
- See more on Amazon...
Brand: No-Spill | Manufacturer: No-Spill
Dimensions: 2.40 x 10.70 x 4.15 inches | Weight: 0.20 pounds
Warranty: Limited Manufacturer
See On Amazon #7
Gas Can Spout Replacement, Gas Can Nozzle,(3Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps
Asin: B09HMXJ3JR | Model: FOANRIY-03 | PartNumber: FOANRIY-03 | Ean: 0046432116315 | UPC: 046432116315
Anti-Overflow Design,(Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Can Spout Cap Is Hexagonal)The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down.
Simple To Install,4 Each Set Of Products Includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 Yellow Spouts And Rubber Gaskets, 3 Nozzle Caps With Threads, 2 Kinds Of Gas Can Vent Caps, And The Drill Bit Required To Install The Gas Discharge Cap. During The Installation And Use Process, If You Need Assistance, You Can Contact Us, And We Will Serve You As Quickly As Possible.
Can Cover More Oil Cans, We Offer Two Types Of Gas Can Vent Caps, (Gas Can Vent Caps-A) Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use.(Gas Can Vent Caps-B) Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps.
High-Quality Materials, These Gas Can Nozzle Replacement Parts Are Made Of High-Quality Hdpe Materials, In Use You Can Bend Freely Without Breaking. Thicker And Widened Rubber Gaskets, Can Better Fit The Bottle Cap, Prevent Liquid Leakage When Refueling.
Features
- Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 6 threaded collar caps 3 Coarse Thread &3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed
- High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling
- Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down
- Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.(Gas Can Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps
- Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible
- See more on Amazon...
Brand: FOANRIY | Manufacturer: FOANRIY
See On Amazon #8
Replacement Gas Can Spouts Improved Design Gasket Flexible Pour Nozzle with Vent Cap for Older Gas Can Fuel Water Jug 1 2 5 Gallon White
Asin: B0B63KKYQM
Push - In Vent Cap For Faster And Safer Emptying, Lanyard For Retaining The Cap To Prevent Loss.
Each Kit Includes: (1) Filler Nozzle, (1) Spout Cap With Lanyard, (1) "O" Ring Gasket, (2) Base Caps, (1) Yellow Push-In Vent Cap,(1)Black Rear Vent Cap,(1)Drill Bit. 3 Kits Included.
Compatible With Most Of Gas Cans And 1/2/5/10 Gallon: Universal Gas Can Spout Kit Comes With Two Different Collar Screw Cap, Fine Thread And Coarse Thread Collar Cap ,Fit Most Of The Cans.
Flexible Nozzle Can Be Bent To Adjust Various Angles Make Gas/Water Easily Flows Out Without The Need For Other Devices And No More Spilling.
Features
- Fuel can spouts are made of high strength ABS plastic, improved gasket more reliable and no leak
- Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling
- Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss
- Compatible with Most of gas cans and 1/2/5/10 gallon: Universal gas can spout kit comes with two different collar screw cap, fine thread and coarse thread collar cap ,fit most of the cans
- Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) O ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap,(1)drill bit. 3 Kits included
- See more on Amazon...
Brand: WHSSFINE
See On Amazon #9
Gas Can Spout Replacement, Anti-Spill Gas Can Nozzle Replacement, 3-Kit Gas Can Spouts No Leaky, Upgraded Replacement Gas Can Spout with Flexible Nozzle, Gas Can Vent, Fit for Most 1/2/5/10 Gal Can
Asin: B0CGTN1RDL
Uncompromising Quality: Crafted With High-Quality Hdpe Material, Our Gas Can Nozzle Guarantees Exceptional Durability. Seamlessly Molded Hoses Eliminate Any Possibility That Could Compromise Toughness And Strength. Bend The Hoses In Whatever Way You Want, And They Will Not Break..
Effortless Installation: Installation Is A Breeze! Each Set Includes Everything You Need: 6 Screw Collar Caps (3 Coarse Thread & 3 Fine Thread), 3 Spouts Hoses With Rubber Gaskets, 3 Threaded Nozzle Caps, 2 Types Of Gas Can Vent Caps, And Even The Drill Bit Required For The Installation Of The Cap. If You Require Any Assistance During The Installation Or Usage Process, Our Dedicated Customer Support Team Is Always Ready To Help, Ensuring Prompt And Efficient Service..
Anti-Spill Design: Our Replacement Gas Can Spouts Incorporate An Anti-Spill Design That Renders A Mess-Free Refueling Experience. The Gas Can Spout Tubes And Caps Are Threaded. The Cap Features A Rubber Sealing Ring Inside. Simply Tighten The Spout Cap(The Hexagonal One) After Use, And Even During Transportation, There Will Be No Oil Spill..
Versatility At Its Best: Our Product Is Designed To Cover A Wide Range Of Oil Cans. We Offer Two Types Of Gas Can Vent Caps To Accommodate Different Needs. Vent Cap A: Perfect For Oil Cans Without A Vent At The End And Requires A Simple Drilling And Installation Process. Vent Cap B: Suitable For Replacement On Barrels With A Vent Cap At The Top..
Features
- ENHANCED COMPATIBILITY AND CONVENIENT LENGTH: Cyluer gas can spout replacement kit boasts superior compatibility, suitable for most 1/2/5/10 gal oil cans, fitting oil jug mouths ranging from 1.7in to 1.82in. The length of the hose has been extended to 8.1in, ensuring greater convenience and flexibility.
- VERSATILITY AT ITS BEST: Our product is designed to cover a wide range of oil cans. We offer two types of gas can vent caps to accommodate different needs. Vent cap A: Perfect for oil cans WITHOUT a vent at the end and requires a simple drilling and installation process. Vent cap B: Suitable for replacement on barrels WITH a vent cap at the top.
- UNCOMPROMISING QUALITY: Crafted with high-quality HDPE material, our gas can nozzle guarantees exceptional durability. Seamlessly molded hoses eliminate any possibility that could compromise toughness and strength. Bend the hoses in whatever way you want, and they will NOT break.
- ANTI-SPILL DESIGN: Our replacement gas can spouts incorporate an anti-spill design that renders a mess-free refueling experience. The gas can spout tubes and caps are threaded. The cap features a rubber sealing ring inside. Simply tighten the spout cap(the hexagonal one) after use, and even during transportation, there will be no oil spill.
- EFFORTLESS INSTALLATION: Installation is a breeze! Each set includes everything you need: 6 screw collar caps (3 coarse thread & 3 fine thread), 3 spouts hoses with rubber gaskets, 3 threaded nozzle caps, 2 types of gas can vent caps, and even the drill bit required for the installation of the cap. If you require any assistance during the installation or usage process, our dedicated customer support team is always ready to help, ensuring prompt and efficient service.
- See more on Amazon...
Brand: Cyluer
See On Amazon #10
Gas Can Spout Replacement,Gas Can Nozzle,(2 Kit-White) with 4 Screw Collar Caps(2 Coarse Thread &2 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps
Asin: B0B14BXNKH
Anti-Overflow Design, (Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Con Spout Cap Is Hexagonal)The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down..
Simple To Install, Each Set Of Products Includes, 4 Screw Collar Caps (2 Coarse Thread &2 Fine Thread) 2 White Spouts And Rubber Gaskets, 2 Nozzle Caps With Threads，2 Kinds Of Gas Can Vent Caps, And The Drill Bit Required To Install The Gas Discharge Cap. During The Installation And Use Process, If You Need Assistance, You Can Contact Us, And We Will Serve You As Quickly As Possible..
Can Cover More Oil Cans, We Offer Two Types Of Gas Can Vent Caps, (Gas Can Vent Caps-A) Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use. (Gas Can Vent Caps-B) Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps..
High-Quality Materials, These Gas Can Nozzle Replacement Parts Are Made Of High-Quality Hdpe Materials,In Use, You Can Bend Freely Without Breaking. Thicker And Widened Rubber Gaskets, Can Better Fit The Bottle Cap, Prevent Liquid Leakage When Refueling..
Features
- Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed.
- High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.
- Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.
- Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps.
- Simple to install, Each set of products includes, 4 Screw Collar Caps (2 Coarse Thread &2 Fine Thread) 2 White Spouts and rubber gaskets, 2 nozzle caps with threads 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible.
- See more on Amazon...
Brand: FOANRIY | Manufacturer: FOANRIY
See On Amazon #11
Gas Can Spout Replacement Universal Kit Leakproof Angle Nozzles Gasket Filter Screen Vent Cap Drill Bit for Old Style Gas Can Compatible with Midwest Blitz Gott Rubbermaind Essence Scepter Pack of 3
Asin: B0CH8XV7MW
Labor-Saving: Gas Can Spout With A Unique Angle Design Makes It Easy To Pour Without The Need For Other Devices And Bending Tube.
High Compatibity: Fuel Can Spout Replacement Kit Include 2 Type Of Thread Cap(Fine & Coarse), Fit For Most Water Jug Gas Can Pre-2009.
Complete Kit: Spout Replacement Vent Kit Come With All The Parts You Need Include Spout And Cap,Vent Cap, Base Cap, Filter Screen,Gaskets And Drill Bit. You Won't Need To Buy Another Part Seperately.
Time-Saving: Push In Vent Cap For Faster And Safer Emptying, Filter/Flame Arrestor Prevent Any Serious Damage For Smoother And Cleaner Pouring.
Fuel-Saving: With This Replacement Nozzle To Pour The Liquid, You Will Never Spill Gas All Over Yourself And Your Equipment Again.
Features
- HIGH QUALITY: Gas can nozzle kit are made of UPGRADE plastic that not easy to crack,thicker and widened rubber gaskets Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling
- FUEL-SAVING: With this replacement nozzle to pour the liquid, you will never spill gas all over yourself and your equipment again
- LABOR-SAVING: Gas can spout with a Unique Angle Design makes it easy to pour without the need for other devices and bending tube
- TIME-SAVING: Push in vent cap for faster and safer emptying, filter/flame arrestor prevent any serious damage for smoother and cleaner pouring
- HIGH COMPATIBITY: Fuel can spout replacement kit include 2 type of thread cap(FINE & COARSE), Fit for most water jug gas can pre-2009
- COMPLETE KIT: Spout replacement vent kit come with all the parts you need include spout and cap,vent cap, base cap, filter screen,gaskets and drill bit. You won't need to buy another part seperately
- See more on Amazon...
Brand: Deelink
See On Amazon #12
2 - Mr. Yellow Cap Fuel Gas Can Jug Spouts Nozzles, Rings & Caps, replaces Blitz 900302 900092 900094 Old Style - Please Read Description Thoroughly Before Ordering! Thank You
Asin: B07KWGKLBP | Model: 2R2S2C | PartNumber: 2R2S2C | Ean: 0653552684770, 0602401691797 | UPC: 602401691797, 653552684770
Designed To Fit The Blitz Fuel Containers That Came With The Hard Black Plastic Spout Only. If You Have The Blitz Can With A Flex Clear Spout, These Will Not Work As The Ring Is A Different Od Size And Thread, But "May" Also Fit Kolpin, Rotopax, Scepter And Others If The Spout Numbers Are The Same As Blitz.
Features
- TWO (2) - Blitz Spouts / Nozzles / Rings & 2 Caps
- Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring is a different OD size and thread, but may also fit Kolpin, Rotopax, Scepter and others if the spout numbers are the same as Blitz
- See more on Amazon...
Brand: Mr. Yellow Cap
Dimensions: 2.00 x 7.00 x 2.00 inches | Weight: 0.20 Pounds
See On Amazon #13
19 pcs Gas Can Spout Replacement set, Gas Can Nozzle 5 Gal 3 Bendable tubes 3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps 6 Vent Caps 1 drill Lid
Asin: B0B4F32ZPQ | Model: 1 | PartNumber: 1 | Ean: 0768484739839 | UPC: 768484739839
Simple To Install: 3 Bendable Tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most Of The Cans,3 Threaded Caps For Tube，6 Vent Caps 1 Drill Lid Has Thick Rubber Pad，Please Feel Free To Contact Us For Installation Problems, We Will Solve It For You As Soon As Possible.
We Offer Two Types Of Gas Con Vent Caps,One Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use.Another Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps.You Don't Have To Go Through The Hassle Of Replacing Your Old Gas Tank. By Replacing The Nozzle And Vent Kit，Helping You Save Your Old Gas Can Instead Of Buying A New One..
The Spout Cap Tube And The Spout Are Threaded, Every The Spout Cap Has A Thick Rubber Sealing Ring Inside. As Long As You Tighten The Nozzle Cap. No Oil Spills, Even In The Case Of Transport Or A Tank Topped Down..
High Quality: These Gas Can Spout Are Made Of Hdpe Plastic（Same As 10 5 Gallon Gas Can Plastic）, Which Are Bendable And Durable. Thicker And Widened Rubber Gaskets, Can Better Fit The Gasoline Container, Longer Service Life，Safe Without Leakage.
Features
- 19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans 6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks
- HIGH QUALITY: these gas can spout are made of HDPE plastic same as 10 5 gallon gas can plastic , which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life Safe without leakage
- Simple to install: 3 Bendable tubes 3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube 6 Vent Caps 1 drill Lid has Thick Rubber pad Please feel free to contact us for installation problems, we will solve it for you as soon as possible
- The spout cap tube and The spout are threaded, every the spout cap has a thick rubber sealing ring inside. as long as you tighten the nozzle cap. No oil spills, even in the case of transport or a tank topped down.
- We offer two types of gas con vent caps,one is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.another is used for another oil can with a vent cap at the tail, Can replace old vent caps.you don't have to go through the hassle of replacing your old gas tank. By replacing the nozzle and vent kit helping you save your old gas can instead of buying a new one.
- See more on Amazon...
Brand: Pftjujudan | Manufacturer: pft
Weight: 0.55 pounds
See On Amazon #14
3 Kit-Yellow Gas Can Spout Replacement Set, Gas Can Nozzle 1/2/5/10 Gal Replacement of Old Tanks (19 pack)
Asin: B0B9G4JQFQ | Model: p009 | PartNumber: p009 | Ean: 0768461907046 | UPC: 768461907046
Simple To Install: 3 Bendable Tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most Of The Cans,3 Threaded Caps For Tube，6 Vent Caps 1 Drill Lid Has Thick Rubber Pad，Please Feel Free To Contact Us For Installation Problems, We Will Solve It For You As Soon As Possible.
We Offer Two Types Of Gas Con Vent Caps,One Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use.Another Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps.You Don't Have To Go Through The Hassle Of Replacing Your Old Gas Tank. By Replacing The Nozzle And Vent Kit，Helping You Save Your Old Gas Can Instead Of Buying A New One..
The Spout Cap Tube And The Spout Are Threaded, Every The Spout Cap Has A Thick Rubber Sealing Ring Inside. As Long As You Tighten The Nozzle Cap. No Oil Spills, Even In The Case Of Transport Or A Tank Topped Down..
19 Pcsgas Can Spout Replacement ,Suitable For Most 1/2/5/10 Gal Gas Cans，6 * Screw Collar Caps Are All 1.75Inch, 3 Of Them Are Coarse Threads And The Other 3 Are Fine Threads. Please Check Your Gas Can Outside Thread Diameter Before You Make This Purchase，As Can Spout Kit For 1/2/5/10 Gal Replacement Of Old Tanks.
Features
- 19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans 6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks
- 19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans 6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks
- Simple to install: 3 Bendable tubes 3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube 6 Vent Caps 1 drill Lid has Thick Rubber pad Please feel free to contact us for installation problems, we will solve it for you as soon as possible
- The spout cap tube and The spout are threaded, every the spout cap has a thick rubber sealing ring inside. as long as you tighten the nozzle cap. No oil spills, even in the case of transport or a tank topped down.
- We offer two types of gas con vent caps,one is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.another is used for another oil can with a vent cap at the tail, Can replace old vent caps.you don't have to go through the hassle of replacing your old gas tank. By replacing the nozzle and vent kit helping you save your old gas can instead of buying a new one.
- See more on Amazon...
Brand: Pftjujudan | Manufacturer: ptf
See On Amazon #15
Gas Can Spout Replacement,Fuel Can Spout,Gas Tank Nozzle,Gas Can Nozzle,(3Kit-Yellow) with 3 Coarse Thread Caps & 3 Fine Thread Caps,Flexible Pour Nozzle Suitable,Built in Sealing Ring Prevent Leakage
Asin: B0CQ1QX6QD | Ean: 0658370055399 | UPC: 658370055399
Value Set:19Pcs Gas Tank Nozzle Replacement Sets Include: 3 Yellow Spouts, 6 Screw Collar Caps ( 3 Coarse Thread And 3 Fine Thread ), 3 Spout Sealing Caps, 3 Gas Can Vent Caps-A ( Used For Oil Cans Without A Vent At The End ), 1 Universal Drill Bit ( Use A Drill To Drill A Hole At The End ), 3 Gas Can Vent Caps-B ( Used For Barrels With A Vent Cap At The Top )..
Good Security:Yellow Spouts Including Runner Gasket, Spout Sealing Caps Has A Built-In Sealing Ring, Ensures Gas Leakage And Evaporation Prevention, Threaded Link, Do Not Worry About Leakage During Use, More Security..
Applicability:Gas Can Spout Replacement Set Contains 3 Coarse Thread Caps And 3 Fine Thread Caps, Fitting Oil Jug Mouths Ranging From 1.7Inch To 1.82Inch, The Length Of The Hose Has Been Extended To 8.1Inch, Flexible Pour Nozzle Suitable..
Easy To Use: Gas Spout Replacement Incorporate An Anti-Spill Design, Easy To Install, Easy To Use, Suitable For Most 1/2/5/10 Gallon Gas Cans, You Will Renders A Mess-Free Refueling Experience And Good Life..
Features
- High Quality: Fuel Can Spout Made of High Quality HDPE Material, One-Piece Molding, Stronger, Durable and Less Prone to Breakage, Ensure the Safety of Use.
- Easy to Use: Gas Spout Replacement Incorporate an Anti-Spill Design, Easy to Install, Easy to Use, Suitable for Most 1/2/5/10 Gallon Gas Cans, You Will Renders a Mess-Free Refueling Experience and Good Life.
- Value Set:19Pcs Gas Tank Nozzle Replacement Sets Include: 3 Yellow Spouts, 6 Screw Collar Caps ( 3 Coarse Thread and 3 Fine Thread ), 3 Spout Sealing Caps, 3 Gas Can Vent Caps-A ( Used for Oil Cans Without a Vent at The End ), 1 Universal Drill Bit ( Use A Drill To Drill A Hole At The End ), 3 Gas Can Vent Caps-B ( Used for Barrels With a Vent Cap at the Top ).
- Applicability:Gas Can Spout Replacement Set Contains 3 Coarse Thread Caps and 3 Fine Thread Caps, Fitting Oil Jug Mouths Ranging From 1.7inch to 1.82inch, The Length of the Hose Has Been Extended to 8.1inch, Flexible Pour Nozzle Suitable.
- Good Security:Yellow Spouts Including Runner Gasket, Spout Sealing Caps Has a Built-In Sealing Ring, Ensures Gas Leakage and Evaporation Prevention, Threaded Link, Do Not Worry About Leakage During Use, More Security.
- See more on Amazon...
Brand: BESOTDN | Manufacturer: BESOTDN
See On Amazon #16
Gas Can Spout Replacement Gas Can Nozzle for 1/2/5/10 Gallon Gas Can Replacement of Old Style Gas Cans Includes Nozzle, Vent caps, Rubber Gasket, Drill bits, Auxiliary Base Cap
Asin: B0B3W5VCV6
The Spout Kits, And Vent Cap Are Equipped With Rubber Band, Play An Epic Role In Sealing And Adjust The Angle To Put Gas Into Tank Conveniently. It Is Enable To Prevent Liquid Leakage And Transport Or Store Fuel Well..
Qjiuba Gas Can Spout Helps Get Rid Of Inconveniences While Travelling. The Universal Gas Can Spout Is Aim To Help Others While Driving.
With The Replaceable Vent Caps, The Spout Kits Aslo Works For Covering More Oil Cans. The Package Includes Two Oil Cans With Vent Caps,( Gas Can Vent Caps-A Is Applicable To Oil Cans Without A Vent At The End Of The Oil Can, You Just Needa Simple Drilling And Installation When You Are Ready To Use. The Vent Caps-B Is Applicable To Another Oil Can With A Vent Cap At The Tail .).
The Gas Can Spout Replacement Kit Includes Complete Package: 3 Spout Kits , 3 Spout Sealing Caps, 3 Coarse Threaded Bases, 3 Fine Threaded Bases, 1 Gas Can Drill , 6 Replacement Vent Caps..
Features
- QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling.
- The gas can spout replacement kit includes complete package: 3 spout kits , 3 spout sealing caps, 3 coarse threaded bases, 3 fine threaded bases, 1 gas can drill , 6 replacement vent caps.
- The spout kits, and vent cap are equipped with rubber band, play an epic role in sealing and adjust the angle to put Gas into tank conveniently. It is enable to prevent liquid leakage and transport or store fuel well.
- With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just needa simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .)
- QJIUBA Gas Can Spout helps get rid of inconveniences while travelling. The universal Gas Can Spout is aim to help others while driving
- See more on Amazon...
Brand: QJIUBA
Dimensions: 8.07 x 0.83 x 0.83 inches
See On Amazon #17
Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3
Asin: B08T8FTWMV | Ean: 0647097247262 | UPC: 647097247262
Push - In Vent Cap For Faster And Safer Emptying, Lanyard For Retaining The Cap To Prevent Loss.
Each Kit Includes: (1) Filler Nozzle, (1) Spout Cap With Lanyard, (1) "O" Ring Gasket, (2) Base Caps, (1) Yellow Push-In Vent Cap,(1)Black Rear Vent Cap. 3 Kits Included.
Flexible Nozzle Make Gas/Water Easily Flows Out Without The Need For Other Devices And No More Spilling.
Replacement Gas Can Spout Kit Update Your Old Cans Instead Of Buying A New One.
Features
- Fuel tank spouts are made of high strength ABS plastic, improved gasket no leak
- Replacement gas can spout kit update your old cans instead of buying a new one
- Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss
- Flexible nozzle make gas/water easily flows out without the need for other devices and no more spilling
- Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) O ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap. 3 Kits included
- See more on Amazon...
Brand: Nother
See On Amazon #18
Godboy Gas Can Spout Replacement, Gas Can Nozzle, (3 Kit-White) Flexible Pour Nozzle Suitable for Most 1/2/5/10 Gal Oil Cans, Gas Spout Replacement, Fuel Can Spout, Gas Tank Nozzle
Asin: B0CRB4F1RG | Model: PKPJ240102 | PartNumber: PKPJ240102
【Anti-Overflow Design】The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down. (Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Con Spout Cap Is Octagonal).
【Suitable For More Cans】We Offer Two Types Of Gas Can Vent Caps, (Gas Can Vent Caps-A) Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use.(Gas Can Vent Caps-B) Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps. During Installation And Use, If You Need Help, Please Feel Free To Contact Us. Our Customer Service Team Will Serve You As Soon As Possible..
【Ideal Valuable Kit】All The Tools Required For Your Gas Can Handling. It Comes With 3 Yellow Spouts, 6 Screw Collar Caps( 3 Coarse Thread & 3 Fine Thread), 3 Spout Caps, 3 Sealing Gaskets For Spout Caps, 3 Gasket Stoppers For Gas Can Vent Caps-B, 6 Vent Caps In Two Models Suit For Most Oil Cans And 1 Drill Bit Of The Proper Size..
【High-Quality】Made From High-Quality Hdpe Materials. Gas Can Spouts Have Excellent Durability, And Include Thicker And Widen Rubber Gaskets To Help Ensure A Good, Tight Fit To The Cans. Definitely Easy To Use, All Seals Worked Great, Easy To Install, Great Value For Your Money! Enjoy The "Old School" Design That Actually Prevents Spills And Leaks, Even In Transport Or Upside Down..
Features
- Gas Can Spout Replacement Suitable for most 1/2/5/10 gal oil cans. 6 threaded collar caps 3 Coarse threads & 3 Fine threads. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing.
- High-Quality Made from high-quality HDPE materials. Gas can spouts have excellent durability, and include thicker and widen rubber gaskets to help ensure a good, tight fit to the cans. Definitely easy to use, all seals worked great, easy to install, great value for your money! Enjoy the old school design that actually prevents spills and leaks, even in transport or upside down.
- Anti-Overflow Design The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down. (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is octagonal)
- Ideal Valuable Kit All The Tools Required For Your Gas Can Handling. It comes with 3 yellow spouts, 6 screw collar caps( 3 Coarse Thread & 3 Fine Thread), 3 spout caps, 3 sealing gaskets for spout caps, 3 gasket stoppers for gas can vent caps-B, 6 vent caps in two models suit for most oil cans and 1 drill bit of the proper size.
- Suitable for More Cans We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.(Gas Can Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps. During installation and use, if you need help, please feel free to contact us. Our customer service team will serve you as soon as possible.
- See more on Amazon...
Brand: Godboy
See On Amazon #19
Gas Can Spout Replacement, 4-Kit Gas Can Nozzles Old Style Easy to Install, No-Spill Gas Can Nozzle Replacement, Upgraded Gas Can Spouts with Gas Can Vent Cap, Fit for Most 1/2/5/10 Gallon Cans
Asin: B0C3XBYHZF | Model: gas can spout replacement | PartNumber: gas can spout replacement
No-Spill Design: Our Gas Tank Nozzle Incorporates A No-Spill Design That Renders A Mess-Free Refueling Experience. The Gas Can Spout Tubes And Caps Are Threaded. The Cap Features A Rubber Sealing Ring Inside. Simply Tighten The Cap(The Hexagonal One) After Use, And Even During Transportation, There Will Be No Oil Spill..
Effortless Installation: Installation Is A Breeze! Each Replacement Gas Spouts Kit Includes Everything You Need: 8 Screw Collar Spouts Caps (4 Coarse Thread & 4 Fine Thread), 4 Spouts Hoses With Rubber Gaskets, 4 Threaded Nozzle Caps, 2 Types Of Gas Can Vent Caps, And Even The Drill Bit Required For The Installation Of The Vent Cap-A. If You Require Any Assistance During The Installation Or Usage Process, We Are Always Ready To Help, Ensuring Prompt And Efficient Service..
Versatility At Its Best: Our Gas Can Spouts Are Designed To Cover A Wide Range Of Cans. We Offer Two Types Of Gas Can Vent Caps To Accommodate Different Needs. Vent Cap A: Perfect For Oil Cans Without A Vent At The End And Requires A Simple Drilling And Installation Process. Vent Cap B: Suitable For Replacement On Barrels With A Vent Cap At The Top..
Uncompromising Quality: Crafted With High-Quality Hdpe Material, Our Replacement Gas Can Spout Kit Guarantees Exceptional Durability. Seamlessly-Molded Hoses Eliminate Any Possibility That Could Compromise Toughness And Strength. Bend The Hoses In Whatever Way You Want, And They Will Not Break..
Features
- ENHANCED COMPATIBILITY AND CONVENIENT LENGTH: Cyluer gas can spout replacement kit boasts superior compatibility, suitable for most 1/2/5/10 gallon gas cans, fitting oil jug mouths ranging from 1.7in to 1.82in. The length of the hose has been extended to 8.1in, ensuring greater convenience and flexibility.
- UNCOMPROMISING QUALITY: Crafted with high-quality HDPE material, our replacement gas can spout kit guarantees exceptional durability. Seamlessly-molded hoses eliminate any possibility that could compromise toughness and strength. Bend the hoses in whatever way you want, and they will not break.
- NO-SPILL DESIGN: Our gas tank nozzle incorporates a no-spill design that renders a mess-free refueling experience. The gas can spout tubes and caps are threaded. The cap features a rubber sealing ring inside. Simply tighten the cap(the HEXAGONAL one) after use, and even during transportation, there will be no oil spill.
- VERSATILITY AT ITS BEST: Our gas can spouts are designed to cover a wide range of cans. We offer two types of gas can vent caps to accommodate different needs. Vent cap A: Perfect for oil cans WITHOUT a vent at the end and requires a simple drilling and installation process. Vent cap B: Suitable for replacement on barrels WITH a vent cap at the top.
- EFFORTLESS INSTALLATION: Installation is a breeze! Each replacement gas spouts kit includes everything you need: 8 screw collar spouts caps (4 coarse thread & 4 fine thread), 4 spouts hoses with rubber gaskets, 4 threaded nozzle caps, 2 types of gas can vent caps, and even the drill bit required for the installation of the vent cap-A. If you require any assistance during the installation or usage process, we are always ready to help, ensuring prompt and efficient service.
- See more on Amazon...
Brand: Cyluer
See On Amazon #20
Fuel Gas Can Jug Spouts Nozzles Rings & Caps for Blitz 900302 900092 900094 Old Style, Use for Fuel, Diesel, Kerosene, Gas and Water - 5 gallon gas can spout (5 Pcs)
Asin: B0C9J44VCY
Note: If Your Blitz Can Has A Flexible Clear Spout, Because The Ring Has A Different Od Size And Thread, Then Our Product Will Not Fit..
Products Are Used To Replace Old Or Damaged Fuel Gas Can Jug Spouts, The Products Are Made Of High Quality Abs Plastic. The Threaded Bottom Ring And Secure Locking Nozzle Tip Are Designed So That These Products Can Be Handled Or Transported Without Problems Such As Leaks..
Our Sales Purpose Is Committed To The Satisfaction Of Each Customer, If You Have Any Questions Please Contact Us Promptly, We Will Answer You Within 24 Hours..
The Product "May" Also Be Compatible With Kolpin, Rotopax, Scepter And Other Products With The Same Spout Number As Blitz. For Your Pleasant Shopping Experience, Please Check The Product Size Information Carefully Before Purchasing..
Compatible With Blitz 900092 900094 900302 Of Lightning Self-Exhaust Nozzles (Old Style)..
Features
- Product Information: 5 * Lightning Spouts, 5 * Rings and 5 * Yellow Cap, Please refer to the pictures for product specific size information.
- Compatible with Blitz 900092 900094 900302 of lightning self-exhaust nozzles (Old Style).
- Note: If your blitz can has a flexible clear spout, because the ring has a different OD size and thread, then our product will not fit.
- The product may also be compatible with Kolpin, Rotopax, Scepter and other products with the same spout number as Blitz. For your pleasant shopping experience, please check the product size information carefully before purchasing.
- Products are used to replace old or damaged Fuel Gas Can Jug Spouts, The products are made of high quality ABS plastic. The threaded bottom ring and secure locking nozzle tip are designed so that these products can be handled or transported without problems such as leaks.
- Our sales purpose is committed to the satisfaction of each customer, if you have any questions please contact us promptly, we will answer you within 24 hours.
- See more on Amazon...
Brand: LIZEWEI
See On Amazon
Looking For Something Else?
Search