Hon&Guan 10 inch Backdraft Damper, One-Way Airflow Ducting Insert Backflow Preventer Duct Draft Blocker, HVAC Inline Fan Vent
Asin: B09WDGNRHT
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Wide Applications】Back Draught Valves Can Be Inserted Into Hvac Ducting Which Are Flexible Or Non-Flexible. Designed For Use With Range Hoods, Bathroom Fans, Kitchen And Other Home Hvac Applications..
【Backdraft Shutter】Hon&Guan Draft Blocker Designed To Improve Ventilation By Preventing Air From Re-Circulating When The Fans Are Not In Use, Rubber Ring Ensure 100% Closure And Quiet Closing..
【Lightweight Valve Wings】The Valve Wings Open Under The Pressure Created By The Airflow; When The Air Flows In The Opposite Direction, It Is Automatically Closed Under The Action Of The Spring, So As To Cut Off The Flow..
【Installation Method】The 10 Inch Backdraft Damper Has An Opening Of 250Mm And A Length Of 128Mm. When Installed Horizontally, The Springs Should Be Positioned Horizontally To Allow For Optimal Opening And Closing..
Features
- Material The 10 duct damper and the flap leaves is made of a Galvanized steel to withstand temperatures up to 140 F, the Axis are made of aluminum, while the spring are made of carbon steel.
- Installation method The 10 inch backdraft damper has an opening of 250mm and a length of 128mm. When installed horizontally, the springs should be positioned horizontally to allow for optimal opening and closing.
- Wide applications Back draught valves can be inserted into hvac ducting which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications.
- Lightweight valve wings The valve wings open under the pressure created by the airflow; when the air flows in the opposite direction, it is automatically closed under the action of the spring, so as to cut off the flow.
- Backdraft Shutter Hon&Guan Draft Blocker designed to improve ventilation by preventing air from re-circulating when the fans are not in use, rubber ring ensure 100% closure and quiet closing.
- See more on Amazon...
Brand: Hon&Guan | Manufacturer: Hon&Guan
Dimensions: 5.03 x 5.03 x 9.84 inches | Weight: 1.10 Pounds
See On Amazon Similar To Hon Guan 10 inch Backdraft
#1
Draft Blocker - 10'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (10'' Inch)
Asin: B08FBCVNN5 | Ean: 4605098011363
Installation: The Backflow Flap Is Installed By Inserting It Into The Ventilation Pipe Until It Stops. The Position Of The Spring Should Be Horizontal For Horizontal Installations So That It Can Open And Close Optimally. The Backdraft Shutter Is Installed So That The Damper Blades Open Only In The Outflowing Air Direction..
Back Draught Valves Can Be Inserted Into Ventilation Ducts Which Are Flexible Or Non Flexible. Cannot Be Used With Plastic Ducts As The Sizes Are Different..
The Backflow Flap Opens And Closes Automatically At Low Air Volumes. It Has A Smooth-Running Spring And An Internal Foam Strip To Keep The Blades From Rattling And Can Be Installed Horizontally Or Vertically.
Damper Has 2 Valves, Designed For Use In Air Conditioners (Ac), Dryers, Exhaust, Extractor Or Range Hoods, Heating Ducts, Vents And Other Hvac Applications.
Features
- Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct
- Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications
- INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
- The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically
- Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different.
- See more on Amazon...
Brand: ERA Group | Manufacturer: ERA Group
See On Amazon #2
Kikerike 10 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Deflector
Asin: B09WHTHJ2H
【Function】This Airflow Regulating Backdraft Shutter Fits Over The Td Lip And Is Designed To Improve Ventilation By Preventing Air From Re-Circulating When The Fans Are Not In Use..
【Note】Back Draught Valves Can Be Inserted Into Ventilation Ducts Which Are Flexible Or Non Flexible. Cannot Be Used With Plastic Ducts As The Sizes Are Different. All Dimensions Are Measured Manually, Please Allow 1-3Mm Differences..
【Wide Application】 These Backdraft Dampers Can Be Widely Used In Acs, Exhaust Fans, Extractors, Range Hoods, Heating Ducts, Vents And Other Residential, Commercial And Industrial Applications..
【Installation】The Backdraft Damper Is Installed By Pushing It Into The Ventilation Pipe As Far As It Will Go. The Position Of The Spring Should Be Horizontal When The Flap Is Installed Horizontally So That It Can Be Opened And Closed Optimally. This Also Applies To The Vertical Installation..
Features
- Material The 10 inch backdraft damper is made of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel.
- Installation The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.
- Function This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use.
- Wide Application These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications.
- Note Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different. All dimensions are measured manually, please allow 1-3mm differences.
- See more on Amazon...
Brand: Kikerike | Manufacturer: Kikerike
See On Amazon #3
ECOPRO VENT - 10" Inch Backdraft Damper for Straight or Flex Duct. Bathroom Exhaust Fan. Kitchen Hood Exhaust Fan and Different Dryer Fan Backflow Preventer. Steel Damper with Aluminum Valve Flaps
Asin: B08XXSWMNS | Ean: 5068640646533
Quick And Easy To Assemble - Diy Press On Chosen Duct - Flex Or Straight - And By Using Montage Glue. Tape Or Steel Clamps Tighten The Connection..
Heat-Resistant From: -22 °F To 400°F. / Perfect For Indoor And Outdoor Use.
Perfect For Heating, Cooling Or Air Conditioning - Hvac. Bathroom And Kitchen Air Exhaust..
For Use With The Ø10 Inch Round Flexible Or Straight Pipe Ducting Systems.
Features
- 10 Inch steel backdraft damper with aluminum valve.
- For use with the 10 Inch Round flexible or straight Pipe Ducting systems
- Quick and easy to assemble - DIY Press on chosen duct - flex or straight - and by using montage glue. tape or steel clamps tighten the connection.
- Perfect for heating, cooling or air conditioning - HVAC. Bathroom and kitchen air exhaust.
- Heat-resistant from: -22 F to 400 F. / Perfect for indoor and outdoor use
- See more on Amazon...
Brand: ECOPRO VENT
See On Amazon #4
10 Inch Backdraft Damper, HG Power Draft Blocker One-Way Airflow Stopper Backflow Preventer for HVAC Ducting, Inline Fan, Dryer, Exhaust Hood, Bathroom, 250mm, Silver
Asin: B09WDMXXSQ
Easy Installation - Installing The Backdraft Damper Is Straightforward; However, Caution Is Advised During Installation To Protect Your Hands. When Mounting The Flap Horizontally, Ensure That The Position Of The Spring Is Also Horizontal For Optimal Opening And Closing Functionality..
Cost-Effective Solution - Hg Power's Backdraft Dampers Present A Dependable And Enduring Solution That Minimizes Upkeep Costs And Safeguards Your Investment Across A Broad Spectrum Of Residential, Commercial, And Industrial Uses..
Wide Application - These Backdraft Dampers Find Extensive Application In A Variety Of Systems Including Ac Units, Exhaust Fans, Extractors, Range Hoods, Heating Ducts, Vents, And More Across Residential, Commercial, And Industrial Settings..
Unique Function - Backdraft Dampers Enable One-Way Airflow Without Necessitating An Actuator. In The Long Term, These Dampers Can Save You Both Time And Money. They Are Essential For Installations Where Air Flow Is Required To Move In A Single Direction, Such As At Intake And Exhaust Points Within Your System..
Features
- Premium Material - The HG Power backdraft damper is constructed from stainless iron, renowned for its corrosion resistance and minimal deformation properties. It is available in four sizes to choose from 4/6/8/10 inches, allowing you to select the right size damper to avoid compatibility issues.
- Unique Function - Backdraft dampers enable one-way airflow without necessitating an actuator. In the long term, these dampers can save you both time and money. They are essential for installations where air flow is required to move in a single direction, such as at intake and exhaust points within your system.
- Easy Installation - Installing the backdraft damper is straightforward; however, caution is advised during installation to protect your hands. When mounting the flap horizontally, ensure that the position of the spring is also horizontal for optimal opening and closing functionality.
- Wide Application - These backdraft dampers find extensive application in a variety of systems including AC units, exhaust fans, extractors, range hoods, heating ducts, vents, and more across residential, commercial, and industrial settings.
- Cost-Effective Solution - HG Power's backdraft dampers present a dependable and enduring solution that minimizes upkeep costs and safeguards your investment across a broad spectrum of residential, commercial, and industrial uses.
- See more on Amazon...
Brand: HG Power | Manufacturer: HG POWER
See On Amazon #5
HVAC OV 10 Inch Backdraft Damper, One-Way Airflow Ducting Insert with Spring-Loaded Folding Blades (10 Inch)
Asin: B08R42PBWZ | Ean: 4751037980051
Mounts Horizontally Or Vertically To Prevent Backflow And Debris From Entering Ducting..
Fit For 10" Duct Openings.
Galvanized Steel Body With Spring-Loaded Aluminum Damper Blades That Open With Minimal Airflow..
Features Outer Rubber Gaskets That Create An Airtight Seal And Grip Between The Damper And Ducts..
Features
- An antidraft duct insert designed for use with range hoods, bathroom fans and other home HVAC applications.
- Features outer rubber gaskets that create an airtight seal and grip between the damper and ducts.
- Mounts horizontally or vertically to prevent backflow and debris from entering ducting.
- Galvanized steel body with spring-loaded aluminum damper blades that open with minimal airflow.
- Fit for 10 Duct Openings
- See more on Amazon...
Manufacturer: HVAC OV
See On Amazon #6
Backdraft Damper 10 Inch
Asin: B009AX6N86 | Ean: 0097665224001 | UPC: 097665224001
Brand: FAMCO | Manufacturer: FAMCO
Weight: 10.00 Pounds
See On Amazon #7
10-in HVAC Duct Manual Volume Damper with Sleeve - Galvanized Sheet Metal Round Volume Damper Airflow Ducting Branch, Adjustment Handle HVAC Air Balancing System - Easy to Install
Asin: B00AVRIZBS | Model: SHMVD261012 | PartNumber: SHMVD261012 | Ean: 0687384261069 | UPC: 687384261069
Balancing Airflow: Balancing Dampers Are Simply Manual Dampers Encased In A Galvanized Sheet Metal Sleeve. Each Branch Should Have A Balancing Damper Installed. That Way, It's Possible To Regulate The Airflow By Adjusting The Position Of The Damper. They Should Be Located In Areas That Are Easily Accessible For Adjustment. The Ductwork Regulates The Flow Of Air And Redirects It To Specific Places Of A House..
100% Satisfaction: We Are Willing For The Satisfaction Of Our Customers Because Customer Satisfaction Is Our First Priority. If You Have Any Kind Of Problem Regarding Our Product We Will Fully Co-Operate In Solving Your Problem. You Should Never Feel Any Hesitation In Contacting Us. If You Don't Satisfy With Our Products, Then Please Question Us We Will Happily Answer Your Question..
Duct Installation Tips And Trick: To Install Damper Sleeves, You Simply Slide The Sleeve Into The Item You Are Attaching To And Fasted With Sheet Metal Screws, And Conceal The Seam With Duct Tape. We Do Recommend That You Seal Around All Sheet Metal To Sheet Metal Connections With A Duct Sealant To Prevent Air Leakage, And Increase The Efficiency Of Your Hvac System. This Damper Does Not Have A 100% Seal It's Used For Air Balancing, Not Air Termination..
Features
- High Quality: Our Damper & Sleeves are made from Galvanized Steel. All sleeves fabricated from galvanized steel meeting ASTM-A-653-96 standards, by the latest edition of SMACNA gauges and construction standards. It can also be used for wind protection. Designed for use in AC, dryer vent, exhaust, extractor, heating systems, fans, vents, and other residential, commercial, and industrial HVAC applications.
- Duct Installation Tips and Trick: To install Damper Sleeves, you simply slide the sleeve into the item you are attaching to and fasted with sheet metal screws, and conceal the seam with duct tape. We do recommend that you seal around all sheet metal to sheet metal connections with a duct sealant to prevent air leakage, and increase the efficiency of your HVAC system. This damper does not have a 100% seal it's used for air balancing, not air termination.
- Balancing Airflow: Balancing dampers are simply manual dampers encased in a galvanized sheet metal sleeve. Each branch should have a balancing damper installed. That way, it's possible to regulate the airflow by adjusting the position of the damper. They should be located in areas that are easily accessible for adjustment. The ductwork regulates the flow of air and redirects it to specific places of a house.
- 100% Satisfaction: We are willing for the satisfaction of our customers because customer satisfaction is our first priority. If you have any kind of problem regarding our product we will fully co-operate in solving your problem. You should never feel any hesitation in contacting us. If you don't satisfy with our products, then please question us we will happily answer your question.
- See more on Amazon...
Brand: The Sheet Metal Kid | Manufacturer: Snappy
Dimensions: 10.00 x 8.00 x 10.00 inches | Weight: 2.00 Pounds
See On Amazon #8
Vent Systems - 10 Inch Backdraft Damper - One-Way Airflow - Inline Fan Vent Deflector
Asin: B08ZDM7X89 | Ean: 4751037231955
Designed For Use In Ac, Dryer Vent, Exhaust, Extractor Or Range Hoods, Heating Systems, Fans, Vents And Other Residential, Commercial And Industrial Hvac Applications. Best To Use With Vent Systems Hvac Parts..
The Backflow Preventer Valve Is Installed By Pushing It Into The Ventilation Pipe As Far As It Will Go. The Position Of The Spring Should Be Horizontal When The Flap Is Installed Horizontally So That It Can Be Opened And Closed Optimally. This Also Applies To The Vertical Installation..
Duct Draft Stopper Prevent Cold Air Or Wind From Entering The Ventilation Pipe. In This Case, The Flap Is Installed In Such A Way That The Flap Leaves Only Open Into The Outgoing Air Direction. This Means That No Cold Air / Wind Or Smell Can Penetrate The Ventilation Pipe From The Outside..
A Tight Sealing And Fastening Of The Duct Is Achieved By The Rubber Strip Attached To The Inside Of The Draft Blocker Damper. The Rubber Seal Prevents Loud Rattling When The Flap Blades Open And Close. The Housing Of The Flap Is Made Of Galvanized Steel, The Flap Blades Are Made Of Aluminum, The Axle And Spring Are Made Of Stainless Steel.
Features
- Back draft damper for insertion into 10 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct
- A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel
- Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial HVAC applications. Best to use with VENT SYSTEMS hvac parts.
- Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no cold air / wind or smell can penetrate the ventilation pipe from the outside.
- The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.
- See more on Amazon...
Brand: Vent Systems | Manufacturer: Vent Systems
See On Amazon #9
Butterfly Backdraft Damper(10 Inch) (BD 10)
Asin: B00BBMPTQQ
Vertical Or Horizontal Mounting, With One End Crimped.
Made In The Usa.
Heavy-Duty 26 Gauge Galvanized Metal.
Proven Design To Protect Against Backdraft In Your Appliance Venting.
Features
- Backdraft damper with lightweight blades and foam closure shutter for quiet closure
- Proven design to protect against backdraft in your appliance venting
- Vertical or horizontal mounting, with one end crimped
- Heavy-duty 26 gauge galvanized metal
- Made in the USA
- See more on Amazon...
Brand: HVAC Express | Manufacturer: HVAC Express
Dimensions: 10.00 x 7.00 x 10.00 inches | Weight: 1.75 Pounds
See On Amazon #10
Fantech 9800012 RSK-10 Backdraft Damper, 10" Duct
Asin: B000VMHYHY | Model: 9800012 | PartNumber: 9800012 | Ean: 0650737691004 | UPC: 650737691004
10" Duct.
Spring Loaded For Positive Closure.
Features
- Backdraft dampers with galvanized steel collar and lightweight aluminum damper blades
- Spring loaded for positive closure
- 10 Duct
- See more on Amazon...
Brand: FANTECH | Manufacturer: Fantech
Dimensions: 6.00 x 10.50 x 10.50 inches | Weight: 1.30 pounds
See On Amazon
Looking For Something Else?
Search