1S Lipo Battery Charger Board: 3.7V/4.2V Balance Parallel Board 3.8V/4.35V HV LiHv 6 Channel Charging with PH1.25 and JST-PH 2.0 Connector for Tiny Whoop Blade Inductrix Battery
Asin: B09XB5WPLY | Model: B09XB5WPLY_CA NARF | PartNumber: B09XB5WPLY_CA NARF
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Save Charging Time: Can Charge Up To 6 Lithium Batteries(Including Lipo, Life, And Li-Ion Types) At The Same Time( Need To Consider Width Of Battery) When Used With A Balance Charger, Instead Of Balancing Batteries One By One, Effectively Save Your Time..
Avoid Overcharging: It Can Prevent Each Cell Overcharge, So It Can Improve The Balance Efficiency. And The Later Period Of The Balance Charging Cycle Is Shorted Substantially..
Built-In Short Circuit Protection: Equipped With 20A Fu-Se Protection Able To Handle The Large Battery Pressure, Can Protect The Charging Batteries When Short Circuit Happens..
Meet All Your Needs: Support 3.8V/4.35V And 3.7V/4.2V 1S Battery, Allows Xt60 2-4S Input And Micro Usb Input, Able To Use 2-4S Lipo Or Power Bank To Charge, Provides More Convenience For Going Outdoor..
Features
- Updated Charging Board: Equipped with PH1.25 and JST-PH 2.0 connector, allows you to charge the 1s lipo battery with PH1.25 plug and JST PH2.0 plug directly. Suitable for battery of Tiny Whoop Blade Inductrix Battery.
- Meet All Your Needs: Support 3.8V/4.35V and 3.7V/4.2V 1S battery, allows XT60 2-4s input and micro USB input, able to use 2-4s lipo or power bank to charge, provides more convenience for going outdoor.
- Save Charging Time: Can charge up to 6 lithium batteries(including LiPo, LiFe, and Li-ion types) at the same time( Need to consider width of battery) when used with a balance charger, instead of balancing batteries one by one, effectively save your time.
- Built-in Short Circuit Protection: Equipped with 20A fu-se protection able to handle the large battery pressure, can protect the charging batteries when short circuit happens.
- Avoid Overcharging: It can prevent each cell overcharge, so it can improve the balance efficiency. And the later period of the balance charging cycle is shorted substantially.
- See more on Amazon...
Brand: Crazepony | Manufacturer: Crazepony
Dimensions: 0.79 x 4.13 x 2.17 Inches | Weight: 0.15 pounds
Warranty: No
See On Amazon Similar To 1S Lipo Battery Charger Board
#1
MakerFocus 4pcs 3.7V Lithium Rechargeable Battery JST1.25 Connector 2pin, 952540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board
Asin: B07CXNQ3ZR | Ean: 0192684018591 | UPC: 192684018591
Over-Discharge Protection: When The Battery Is About To Run Out And The Voltage Is As Low As 3.0V, The Protection Board Will Also Be Turned Off And Can No Longer Be Discharged, Forming An Over-Discharge Protection Effect.
Short Circuit Protection: When An Accidental Short Circuit Occurs, The Protection Board Will Automatically Shut Down Within A Few Milliseconds And Will Not Be Powered On Again. Note That The Cell Is Short-Circuited (Not Through The Protection Board). The Protection Board Will Also Fail Due To Continuous High Current, Or The Components Are Heated And Damaged.
Overcharge Protection: When Charging The Battery, When The Voltage Reaches The Highest Battery Voltage (4.2V), The Protection Board Will Automatically Power Off And Shut Down, Indicating That It Will Not Continue To Charge When Fully Charged, Form An Overcharge Protection.
1000Mah: The Recommended Charging Current Is 0.2A, The Maximum Is Not More Than 1A. The Discharge Current Is Recommended 0.55A, And The Maximum Is Not More Than 3A.
Features
- Note: The battery overcurrent protection is not a panacea, do not continue to charge and discharge the current and voltage with a large current beyond the range, otherwise the protection board will be damaged and invalid
- 1000mAh: The recommended charging current is 0.2A, the maximum is not more than 1A. The discharge current is recommended 0.55A, and the maximum is not more than 3A
- Over-discharge protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect
- Overcharge protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged, form an overcharge protection
- Short circuit protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous high current, or the components are heated and damaged
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 1.77 x 0.98 inches | Weight: 0.04 pounds
See On Amazon #2
15pcs 5V 1A TP4056 Charging Module Type-C USB 18650 Lithium Battery Charger Board with Protection (Type-C USB)
Asin: B08X6G26Q8 | Ean: 0701715460140 | UPC: 701715460140
Application:It Can Charge For Single-Cell Lith Ium Battery Or Multi-Section Parallelled Lith Ium Batteries, Can Be Powered By Usb Ports; The Module With Usb Port, Can Be Directly Input To Do With Rechargeable Lith Ium Battery As A Phone Charger, And Still Retains Voltage Input Wiring Pads, Which Is Convenient For Diy..
Package Includes:15*Tp4056 Type-C Usb Charging Module.
Note:Please Check All Connections Before Charging, It Will Be Damaged If The Load Out Terminal On The Positive And Negative With Wrong Polarity. There Is Not Included Installation Instruction.If You Are The First Time To Do This Job, We Suggest You Can Watch Related Video On Youtube Before Installation..
Power Indicator: Red Is Charging, Green Is Fully Charged..
Features
- Input Voltage: 5V; Max output current: 1A; Charging cut-off voltage: 4.2V 1%; Input interface: Type-C USB
- Power Indicator: Red is charging, Green is fully charged.
- Application:It can charge for single-cell lith ium battery or multi-section parallelled lith ium batteries, can be powered by USB ports; The module with usb port, can be directly input to do with rechargeable lith ium battery as a phone charger, and still retains voltage input wiring pads, which is convenient for DIY.
- Note:Please check all connections before charging, it will be damaged if the load OUT terminal on the positive and negative with wrong polarity. There is not included Installation instruction.If you are the first time to do this job, we suggest you can watch related video on Youtube before installation.
- Package includes:15*TP4056 Type-C USB Charging Module
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
Weight: 0.04 pounds
See On Amazon #3
Battery Charger Module USB TP4056 3.7V 4.2V to 9V 5V 2A Charge Discharge Integrated Step Up Module,18650 Lithium Li-ion Battery Charger Module(6 PCS)
Asin: B098989NRZ | Ean: 8414825638416
Instructions For Use: Tp4056 Charger Module Can Be Used For Multimeter To Convert To Charge Lithium Batteries. Vin+ Port Input 5V Solar Panel, Bat+ Port Can Output 4.2V To Charger 3.7V 18650 Battery..
Package Contains: 6 * Lithium Li-Ion Battery Charger Module.
Small And Delicate: 1.3In*0.92In/33Mm*23Mm.
Features: Battery Charger Module Combines The Tp4056 Battery Charger With A Boost Circuit. Adds A Battery And Converts A Low Power Dc Device To A Usb Rechargeable Device..
Features
- Material: Battery charger module made of electronic components.Can be used for multimeter, converted to lithium battery charging.
- Features: Battery charger module combines the TP4056 battery charger with a boost circuit. Adds a battery and converts a low power DC device to a USB rechargeable device.
- Instructions for use: TP4056 Charger Module can be used for multimeter to convert to charge lithium batteries. VIN+ port input 5V solar panel, BAT+ port can output 4.2V to charger 3.7V 18650 battery.
- Small and delicate: 1.3in*0.92in/33mm*23mm
- Package contains: 6 * Lithium Li-ion Battery Charger Module
- See more on Amazon...
Brand: ABSOK | Manufacturer: LESEXS
Weight: 0.04 pounds
See On Amazon #4
6pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board Module
Asin: B07PZT3ZW2 | Model: . | PartNumber: . | Ean: 0673400168474 | UPC: 673400168474
★ In Discharge Mode (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output.
★ Allow Discharge While Charging. (Note: At This Time Output Voltage 4.7 / 5V).
★ The First Time The Load Is Connected, The Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On.
★ 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection.
Features
- MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)
- 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection
- In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output
- The first time the load is connected, the output is automatically turned on. If the load is less than 50mA, the output will be automatically turned off after 30 seconds; if the load is greater than 50mA, the output will be automatically turned on
- Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 0.98 x 0.63 Inches
See On Amazon #5
ALAMSCN TP4056 Type-C USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board TC4056A with Dual Protection Functions(Pack of 12)
Asin: B08F7QSLN7 | Model: ALAMSCN | PartNumber: ALAMSCN | Ean: 0701715441620 | UPC: 701715441620
Two-In-One Charging And Discharging Protection Function..
Note: When The Battery Is Connected For The First Time, The Protection Circuit Can Be Activated By Charging It With 5V Voltage..
No Load The Light Not Bright, Red Light For Recharging, Is Full Of Green Light..
There Are Solder Joints For Input Voltage Wiring, Which Is Convenient For Diy..
Features
- The input terminal has a Type-c USB female socket, which can be directly used as an input to charge the lithium battery with a mobile phone charger.
- There are solder joints for input voltage wiring, which is convenient for DIY.
- Two-in-one charging and discharging protection function.
- No load the light not bright, red light for recharging, is full of green light.
- Note: When the battery is connected for the first time, the protection circuit can be activated by charging it with 5V voltage.
- See more on Amazon...
Brand: ALAMSCN | Manufacturer: ALAMSCN
Weight: 0.04 Pounds
Warranty: 3 months
See On Amazon #6
DWEII 10PCS Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB for DIY Charger (no Welding Version)
Asin: B09YD5C9QC | Ean: 0701715515956 | UPC: 701715515956
❃❃It Supports The External Key, Which Is Connected To The K Point And The Output Negative Pole. Short Press To Turn On The Power Display And Turn On The 5V Output. Two Consecutive Short Presses Will Turn Off The Power Display And Turn Off The 5V Output..
❃❃1; When The Charging Current Drops To 100Ma After Reaching The Final Floating Charging Voltage, The Charging Cycle Will Be Automatically Terminated; 2; When The Battery Voltage Drops Below 4.1V, The Charging Cycle Starts Again. 3; When The Battery Voltage Is Lower Than 2.8V, The Battery Will Be Pre Charged With A Current Of 180Ma..
❃❃When The Load Current Is Less Than 50Ma Continuously, The Output Will Be Turned Off..
❃❃Usb Is No Welding Version.
Features
- 10PCS ( no welding version) Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB For DIY Charger
- USB is no welding version
- It supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
- When the load current is less than 50mA continuously, the output will be turned off.
- 1; When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated; 2; When the battery voltage drops below 4.1V, the charging cycle starts again. 3; When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
- See more on Amazon...
Brand: DWEII | Manufacturer: DWEII
See On Amazon #7
CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module
Asin: B06XCXPY86 | Model: 4333092022 | PartNumber: 4333092022 | Ean: 6923074054820
Input Voltage: 5V.
Inputs With Micro Usb Female, Can Be Directly Input To Do With The Phone Charger Rechargeable Lithium Battery.
Connect The Battery To The B + B-, Inserted Into The Usb Female Mobile Phone Charger, The Red Light Is Being Charged, The Green Light To Full..
Maximum Charge Current: 1000Ma.
Features
- Charging cut-off voltage: 4.2V 1%
- Maximum charge current: 1000mA
- Input voltage: 5V
- Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.
- Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
Weight: 0.04 pounds
See On Amazon #8
AITRIP 6PCS 2A USB 18650 Lithium Li-ion Battery Charger Module Boost 3.7V to 5V 9V 12V Adjustable DC-DC Step Up Boost Module TP4056 DIY Kit Parts
Asin: B08GWTBD3T | Model: EC19 | PartNumber: EC19 | Ean: 0701715443501 | UPC: 701715443501
Input Voltage: 4.5-8V Dc.
Charging Voltage: 4.2V Dc ；Charging Current: Max. 1A.
Output Voltage: 4.3-27V Dc (Continuously Adjustable).
Discharging Current: Max. 2A.
Features
- Can be used for multimeter, converted to lithium battery charging
- Discharging current: Max. 2A
- Input voltage: 4.5-8V DC
- Output voltage: 4.3-27V DC (Continuously adjustable)
- Charging voltage: 4.2V DC Charging current: Max. 1A
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
Weight: 0.07 pounds
See On Amazon #9
Treedix 2pcs Type C USB LiPo Battery Charger Board with Battery Protection JST Socket with LED Indicator Charging Rate Adjustable Automatic Power-Down
Asin: B09FJJBLQ1 | Ean: 0764784798361 | UPC: 764784798361
The Default Charging Rate Of The Charger Is 500Ma. If The Battery Is Charged With A Current That Exceeds The Battery Charging Current Specification, It Will Cause The Life Of The Lithium Battery To Decrease. So You Can Add Some Resistors On R1 (This Would Require Cutting A Trace) Or Replacing The Surface Mount Resistor With A Higher Resistance Value..
Plug The Type C Cable Into The Usb Port Of The Charging Board, And Insert The Lithium Battery Into The Jst Port On The Other End.
It Is For Charging 3.7/4.2V Single Lithium Ion/Lithium Polymer Batteries.
Automatic Power-Down:There Is An Led Indicator On The Charging Board. When Charging, The Led Indicator Will Be Lit, And When The Battery Is Fully Charged, The Led Indicator Will Go Out..
Features
- This is a lithium battery charger equipped with a battery charge controller IC MCP73831T-2ACI/OT, the input charging connector uses Type C
- Automatic Power-Down:There is an LED indicator on the charging board. When charging, the led indicator will be lit, and when the battery is fully charged, the led indicator will go out.
- The default charging rate of the charger is 500mA. If the battery is charged with a current that exceeds the battery charging current specification, it will cause the life of the lithium battery to decrease. So you can add some resistors on R1 (this would require cutting a trace) or replacing the surface mount resistor with a higher resistance value.
- It is for charging 3.7/4.2v single Lithium Ion/Lithium Polymer batteries
- Plug the Type C cable into the USB port of the charging board, and insert the lithium battery into the JST port on the other end
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
See On Amazon #10
AEDIKO 20pcs TP4056 Type-C USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board TC4056A with Dual Protection Function
Asin: B0BG6WP8XC | Ean: 0687117700865 | UPC: 687117700865
Two-In-One Charging And Discharging Protection Function.
Light State:No Load The Light Not Bright, Red Light For Recharging,Green Light Is Full Charger.
The Module Come With Solder Joints For Input Voltage Wiring,Which Is Convenient For Diy.
Input Voltage: 4.35-6V (Recommended Voltage 5V).
Features
- Input Interface: Type-C USB
- Input Voltage: 4.35-6V (Recommended Voltage 5V)
- Two-in-One Charging and Discharging Protection Function
- The Module Come With Solder Joints for Input Voltage Wiring,Which is Convenient for DIY
- Light State:NO Load the Light NOT Bright, Red Light for Recharging,Green Light is FULL Charger
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.20 x 1.02 x 0.65 Inches
Warranty: 2M
See On Amazon #11
Acxico 5Pcs 1S 3.7V 10A 18650 Charger PCB BMS Protection Board for 18650 Li-ion Lithium LiPo Battery Cell
Asin: B083YS6KR1 | Model: LB 257 | PartNumber: LB 257 | Ean: 0797806001040 | UPC: 797806001040
The Protection Board Is For 1S Li-Ion/Li-Polymer Battery Cell..
Attention: Strictly According To The Diagram Wiring: B+: Connected Battery Positive, B-: Connect To Battery Negative, P+:Battery Output Input Positive, P-:Battery Output Input Negative, Otherwise It Will Cause Damage To The Chip..
Charging Connector And Discharging Connector Are The Same(P+, P-)..
Protection Voltage Range: 2.5V-4.2V..
Features
- Over charging protection, over discharge protection, short circuit protection, over current protection function.
- Protection voltage range: 2.5V-4.2V.
- The protection board is for 1S Li-ion/Li-Polymer battery cell.
- Charging connector and discharging connector are the same(P+, P-).
- ATTENTION: Strictly according to the diagram wiring: B+: connected battery positive, B-: connect to battery negative, P+:battery output input positive, P-:battery output input negative, Otherwise it will cause damage to the chip.
- See more on Amazon...
Brand: Acxico | Manufacturer: Acxico
See On Amazon #12
SUPULSE LiPo Battery Charger 2S-3S RC Balance,AC 7.4-11.1V 10W Upgrade Version B3AC Pro Compact Charger (B3V2)
Asin: B099K8XFG6 | Model: B3V2 | PartNumber: B3V2 | Ean: 0734931233588 | UPC: 734931233588
[Convenient & Useful]This Supulse Lipo Charger Is Compact And Light, Especially There Is Separated Corresponding Balance Port For Each Battery Pack..
[Note]This Balance Compact Charger Is Suitable For Lipo Battery Only..
[Led To Indicate]Double Colour Led Can Display The Process Of Charging (Red: Charging; Green: Full)..
[Balance Charger]Each Cell Is Charged By Independent Line, Which Make Sure Each Power Supply Is Always Fully Charged, Extending Battery Life..
Features
- [Parameter]2S & 3S Lipo Battery Charger, AC110-240V input, max charge current: 3*800mA.
- [Balance Charger]Each cell is charged by independent line, which make sure each power supply is always fully charged, extending battery life.
- [Convenient & Useful]This Supulse lipo charger is compact and light, especially there is separated corresponding balance port for each battery pack.
- [Led To Indicate]Double colour LED can display the process of charging (RED: charging; GREEN: full).
- [Note]This balance compact charger is suitable for LiPo Battery ONLY.
- See more on Amazon...
Brand: SUPULSE | Manufacturer: EXHOBBY LIMITED
Dimensions: 1.36 x 3.58 x 2.22 inches | Weight: 0.18 Pounds
Warranty: NO
See On Amazon #13
Blomiky 2 Pack 3.7V USB Charger Cable with SM-2P Plug Connector for Mini RC Amphibious Stunt Car Boat Trucks 3.7V Li-ion and Li-Po Battery / 3.7V USB 2
Asin: B08X4PNY6V | Model: 3.7V USB | PartNumber: 3.7V USB
3.7V 1S Usb Charger Cable Suitable For Deerc De42 De44 De45 De68 De69 Rc Trucks , Charger Cable Suitable For Bezgar Ts201 Tc141 Tb202 Tb201 1:20 Scale Rc Trucks, Charger Cable Suitable For Seckton Small Remote Control Rc Car 3.7V Battery.
3.7V Usb Charger Adpater Cable Suitable For Some Kind 1/18 Scale Rc Car And 3.7V Charger Cable Suitable For Some 1:16 Remote Control Car. Charger Cable Suitable For Some Kind Small Szie Rc Trucks Or Rc Crawlers Battery,,Which Voltage And Plug Are Same..
3.7V Usb Charger Cable Suitable For Some Kind Small Size Drift Rc Car Some Kind Of Wave Small Rc Boat Battery,,Which Voltage And Plug Are Same..
3.7V Usb Charger Cable Suitable For Small Size Rc Cars Rc Boat, Rc Trucks ,Charger Cable Suitable For Some Kind Amphibious Some Kind 1:18 1/16 Scale Rc Vehicle Sharkool 4Wd Stunt Rc Car Cars 500Mah Li-Ion Battery,,Which Voltage And Plug Are Same..
Features
- USB Charger cable built-in over charged protection board, it will stop charge after full charged, some red light are not off after full charged, It most take 3-4 hours can full charged 1S 500mAh , It take double time (6-7 hours )to charge 1S 1000mAh battery. Charge connector plug: SM-2P black 2 pin, only suitable for 3.7V 400mAh 500mAh 800mAh Li-ion or Lipo rechargeable small battery, don't advise use in big capacity battery,such as 1500mAh battery, it may take over 10-15 hours to full charge.
- 3.7V USB Charger cable suitable for Small Size RC Cars RC Boat, RC Trucks ,charger cable suitable for some kind Amphibious some kind 1:18 1/16 scale RC Vehicle Sharkool 4WD Stunt RC Car Cars 500mAh Li-ion Battery,,which voltage and plug are same.
- 3.7V 1S USB Charger cable suitable for DEERC DE42 DE44 DE45 DE68 DE69 RC Trucks , Charger cable suitable for BEZGAR TS201 TC141 TB202 TB201 1:20 Scale RC Trucks, Charger cable suitable for Seckton Small Remote Control RC Car 3.7V Battery
- 3.7V USB Charger cable suitable for some kind small size Drift RC Car some kind of Wave Small RC Boat Battery,,which voltage and plug are same.
- 3.7V USB charger adpater cable suitable for some kind 1/18 scale RC Car and 3.7V charger cable suitable for some 1:16 Remote Control Car. Charger cable suitable for some kind small szie RC Trucks or RC Crawlers battery,,which voltage and plug are same.
- See more on Amazon...
Brand: Blomiky | Manufacturer: Blomiky
Dimensions: 0.28 x 24.80 x 0.59 Inches | Weight: 0.02 Pounds
See On Amazon #14
Tenergy TB-6AB Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs w/ LCD Display Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply
Asin: B00466PKE0 | Model: 01435 | PartNumber: 01435 | Ean: 0793631761166, 0844949022187, 5903271467655 | UPC: 793631761166, 844949022187
Works With Multiple Voltages - Compatible With Battery Packs With Voltages That Range From 1.2Volts To 18Volts (1S-15S) For Nickel Metal Hydride Or Nickel–Cadmium Battery Packs And Lithium-Ion Battery Packs With Voltages From 3.7 Volts To 22.2 Volts (1S-6S)..
Easy To Read Screen - View All Charging Statuses And Settings On The Electronic Balance Charger Lcd Screen As You Navigate The Modes And Selections. Charger Includes Tenergy A 12-Month Warranty..
Multiple Functions - More Than A Regular Digital Balance Charger, Tenergy Tb6-B Comes With Features Like Li-Ion And Lipo Balancing, Fast Charging, Data Storage, Cyclic Charging, Discharging, And Much More For All Of Your Battery Packs..
Wide Connector Compatibility - With One Multi-Charging Harness, This Ac Balance Charger Is Compatible With Battery Packs With Tamiya, Mini Tamiya, Jst, Hitec, Ec3, Deans, Xt60, And Bare Leads Connectors So That Additional Connectors Can Be Added..
Features
- One charger for many battery packs - Tenergy TB6-B balance charger/discharger is ideal for all hobby battery packs that are NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs.
- Wide connector compatibility - With one multi-charging harness, this AC balance charger is compatible with battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added.
- Works with multiple voltages - Compatible with battery packs with voltages that range from 1.2volts to 18volts (1S-15S) for nickel metal hydride or nickel cadmium battery packs and Lithium-ion battery packs with voltages from 3.7 volts to 22.2 volts (1S-6S).
- Multiple functions - More than a regular digital balance charger, Tenergy TB6-B comes with features like Li-ion and LiPO balancing, fast charging, data storage, cyclic charging, discharging, and much more for all of your battery packs.
- Easy to read screen - View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections. Charger includes Tenergy a 12-month warranty.
- See more on Amazon...
First Available: 11/26/2018
Brand: Tenergy | Manufacturer: Tenergy
Dimensions: 1.30 x 5.12 x 3.35 inches | Weight: 0.54 pounds
Warranty: Tenergy 1 Year
See On Amazon #15
sea Jump 5PCS 3.7V 400mAh Li Battery with 5in1 Charger for SYMA Q11 H99W H31 H6C H98 TR-C385 TR-P51 TR-F22 Quadcopter Parts Aircraft Model Drone Battery AT-96
Asin: B07SLLVQ2Q
High Capacity Can Make Your Drone Show A Variety Of Difficult Movement.
Voltage: 3.7V, Capacity: 400Mah.
Package List: 5Pcs 3.7V 400Mah Lithium Battery, 1Pcs 5In1 Charger.
Features
- Replacement for H99W H31 H6C H98 TR-C385 TR-P51 TR-F22 drone.
- Package List: 5PCS 3.7V 400mAh Lithium Battery, 1pcs 5in1 Charger
- High capacity can make your drone show a variety of difficult movement
- Voltage: 3.7V, Capacity: 400mAh
- See more on Amazon...
Brand: sea jump | Manufacturer: China
Dimensions: 1.41 x 0.31 x 0.78 Inches | Weight: 0.02 pounds
See On Amazon #16
Lipo Battery Charger, 1S-6S RC Car Charger 150W Lipo Charger 10A Balance Charger Fast Charge Discharge Smart Charger for LiPo/Li-ion/Life Battery(1-6s) NiMH/NiCd (1-15s) RC Hobby Battery Charger
Asin: B07R18YNZQ | Model: C150 | PartNumber: C150
[Terminal Voltage Control]- This Charger Allows User To Set The Charge/Discharge End Voltage Of The Battery. For Example:Lipo Battery End Voltage Is 4.2V /Cell When Charing, While On This Charger, The End Voltage Is Adjustable, Rangs From 3.85V To 4.3V. Warning: This Features For Expert Only!.
[What You Get] - The Ac/Dc Balance Charger Comes With Ac Power Cord,Dc Cable,Balance Board,Explosion Proof Bag .Package Also Comes With Octopus Multi-Charging Harness With Tamiya, Tamiya Mini, Jst, T Plug, Ec3,Trx,Deans Connectors To Be Compatible With Many Charging Connectors.
[Smart Protection]:Low Input Voltage Limit, Automatic Charge Current Limit, Delta-Peak Sensitivity, Capacity Limit, Processing Time Limit,Temperature Threshold. Data Storage And Loading: 20 Memory Data. Firmware Update.
[Multiple Functions]: Compare To A Regular Digital Balance Charger,C150 Battery Charger Comes With Features Like Li-Ion And Lipo Balance Charging, Fast Charging, Data Storage, Battery Meter, Nimh Cyclic Charging And Discharging And Much More For All Of Your Battery Packs.
Features
- [Universal Voltage Compatibility]- the battery balance charger support LiPo/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. LiHV 3.8V-22.8V(1S-6S). NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. PB 2-20V (1-10 Cells) and smart battery.Note: Do not choose the wrong type of battery when charging.
- [Multiple Functions]: Compare to a regular digital balance charger,C150 Battery Charger comes with features like Li-ion and LiPO balance charging, fast charging, data storage, battery meter, NiMH cyclic charging and discharging and much more for all of your battery packs
- [Terminal Voltage Control]- This Charger allows user to set the charge/discharge end voltage of the battery. For example:lipo battery end voltage is 4.2V /cell when charing, while on this charger, the end voltage is adjustable, rangs from 3.85v to 4.3v. Warning: this features for expert only!
- [Smart Protection]:Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit,temperature threshold. Data storage and loading: 20 memory data. Firmware update
- [What You Get] - The AC/DC balance charger comes with AC Power Cord,DC Cable,Balance Board,Explosion Proof Bag .Package also comes with octopus multi-charging harness with TAMIYA, TAMIYA mini, JST, T Plug, EC3,TRX,Deans connectors to be compatible with many charging connectors
- See more on Amazon...
Brand: Haisito | Manufacturer: HTRC
Dimensions: 2.56 x 5.71 x 3.94 inches | Weight: 2.00 pounds
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #17
SUPULSE Lipo Charger 2X Faster Quick Charge 25W 2S-3S RC Balance Charger AC 7.4-11.1V Upgrade Version B3 Pro Compact RC Battery Lipo Charger (B3Pro)
Asin: B08L7VCBXG | Model: B3PRO | PartNumber: B3PRO
Convenient And Useful: This Supulse Lipo Charger Is Compact And Light, Especially There Is Separated Corresponding Balance Port For Each Battery Pack..
Warm Tips: This Supulse Balance Compact Lipo Charger Is Only Suitable For 2-3S Lipo Batteries. Please Follow The Instruction Manual To Charge The Battery, Make Sure That The Battery Is Connected To The Charger Correctly..
Led To Indicate: Double Colour Led Can Display The Process Of Charging. The Indicator Light Will Be Red When Battery Is Being Charged And It Will Turn Into Green When Battery Is Fully Charged..
Balance Charger: Each Cell Is Charged By Independent Line, Which Make Sure That Each Power Supply Is Always Fully Charged, Extending The Battery Life..
Features
- Parameter: 2S-3S Lipo Battery Charger, AC110-240V input, max charge current: 3*2000mA. Especially there is separated corresponding balance port for each battery pack. Quick charge, save 60% time!
- Balance Charger: Each cell is charged by independent line, which make sure that each power supply is always fully charged, extending the battery life.
- Convenient and Useful: This Supulse lipo charger is compact and light, especially there is separated corresponding balance port for each battery pack.
- LED to Indicate: Double colour LED can display the process of charging. The indicator light will be red when battery is being charged and it will turn into green when battery is fully charged.
- Warm Tips: This Supulse balance compact lipo charger is only suitable for 2-3s Lipo batteries. Please follow the instruction manual to charge the battery, make sure that the battery is connected to the charger correctly.
- See more on Amazon...
Brand: SUPULSE | Manufacturer: EXHOBBY
Dimensions: 1.38 x 3.50 x 2.24 Inches | Weight: 0.18 pounds
See On Amazon #18
Lipo Charger H B6 RC Charger LiPo Battery Balance RC Car Charger Discharger for LiPo/Li-ion/Life Battery(1-6s) NiMH/NiCd (1-15s) RC Hobby Battery Balance Charger 80W 6A XT-60/JST/Deans Connectors
Asin: B08C592PNV | Model: HB6 | PartNumber: HB6 | Ean: 0192408712415 | UPC: 192408712415
❤【Easy To Operate】-View All Charging Statuses And Settings On The Electronic Balance Charger Lcd Screen As You Navigate The Modes And Selections. Follow The Instructions And You Will Find It So Easy To Operate. Connect The Battery And Charger, Select The Mode, And Start Charging..
❤【What You Get】-A High-Quality Battery Charger And Accessories Presented With It:Ac Cable , Ac/Dc Adapter, T-Crocodile Clip, Jst Plug, Xt60 Plug, Futaba J Servo Plug, Dc Cable, 4Mm To Deans Charge Cable. And Your Charger Includes A 12 Month Warranty..
❤【High Quality & Safe】-Using Superior Chip And Materials To Deliver Quality Performance, And The Charger Is Designed With Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection And Over-Temperature Protection For Safety.The Charger Shell Is Made Of High-Quality Fireproof Materials And Has Passed The Experimental Certification, So It Can Be Used Safely..
❤【Multiple Practical Functions】-The Lipo Charger Is Built In An Independent Lithium Battery Balancer To Monitor And Balance Each Battery Cell, And It Has Fast & Storage Charging Function, Data Storage & Load Function, Cyclic Charging & Discharging Function,Security For Nickel Metal Hydride Or Nickel–Cadmium Battery Packs And Lithium-Ion Battery Packs..
Features
- Wide Battery Type Compatibility -Similar to our B6 V2, just better.It has the similar function, but is lighter and more cost-effective!The balance charger with high performance microprocessor can charge and discharge a variety of batteries such as 1.2V-18V NiMH/NiCD batteries (1-15 Cells), 3.7V-22.2V LiPo/Li-ion batteries (1-6 Cells), 3.2V-19.2V LiFePO4 batteries (1-6 Cells), and 2V-20V SLA batteries.Note: Do not choose the wrong type of battery when charging.
- Multiple Practical Functions -The lipo charger is built in an independent Lithium Battery Balancer to monitor and balance each battery cell, and it has Fast & Storage Charging function, Data Storage & Load function, Cyclic Charging & Discharging function,security for nickel metal hydride or nickel cadmium battery packs and Lithium-ion battery packs.
- Easy To Operate -View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections. Follow the instructions and you will find it so easy to operate. Connect the battery and charger, select the mode, and start charging.
- High Quality & Safe -Using superior chip and materials to deliver quality performance, and the charger is designed with Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection and Over-Temperature Protection for safety.The charger shell is made of high-quality fireproof materials and has passed the experimental certification, so it can be used safely.
- What you get -A high-quality battery charger and accessories presented with it:AC cable , AC/DC adapter, T-Crocodile Clip, JST Plug, XT60 Plug, Futaba J Servo Plug, DC Cable, 4mm to Deans Charge Cable. And your charger includes a 12 month warranty.
- See more on Amazon...
Brand: Haisito | Manufacturer: HTRC
Weight: 1.60 pounds
See On Amazon #19
LiPo Battery Charger Dual RC LiPo AC150W DC240W 10A C240 Balance Battery Chargers Discharger for 1-6S LiPo Li-ion Life LiHV 1-15S NiCd NiMH PB Smart Battery RC Car
Asin: B07P3ZRTMY | Model: AorikaBeauty010 | PartNumber: AorikaBeauty010 | Ean: 0634383921487 | UPC: 634383921487
▶Multi-Extra Functions--Our Lipo Battery Charger Has Multi-Extra Functions: 1.Battery Meter- Display Lithium Battery Cell Counts, Total Voltage, Battery Capacity Percentage,Each Cell's Voltage; 2. Lithium Battery Internal Resistance Checking; 3.Battery Balance Charge; 4.Adjustable Digital Dc Power; 5. Suitable For Smart Battery; 6.Cycle Charging; 7. Discharge. Please Connect The Charger With The Main Plug At First, Then Connect The Main Plug With The Battery..
▶Max Safety--Low Input Voltage Limit, Automatic Charge Current Limit, Delta-Peak Sensitivity, Capacity Limit, Processing Time Limit,Temperature Threshold. Data Storage And Loading: 20 Memory Data Each Channel. Support Firmware Upgrade. Tips: In Order To Heat Dissipation, It Is Normal That The Fans Has Sound..
▶Terminal Voltage Control--This Dual Lipo Charger Is Allowed To Set The Charge/Discharge Voltage. Full Plastic Shell, Safe, Compact, Beautiful. The Built-In Cooling Fan Comes With A Power Switch. This Battery Charger's Shell Is Made Of Fire-Proof Material. Please Don't Use The Ac Cable And Dc Cable At The Same Time..
▶Support Batteries--The Rc Charger Supports Charging, Discharging And Balance Charging Batteries: 1-6S Lipo Life Lihv Lilon,1-15S Nicd/Nimh, 2-20V Pb And Smart Battery. Automatic Identification Of Lithium Batteries Cells Counts.Support Multiple Charging Models. Please Choose The Right Type Of Battery When Charge. You Can Charge Two Different Batteries At The Same Time, But Please Don't Charge Two Different Batteries At The Same Channel..
Features
- Dual Model--The rc battery charger has AC/DC dual input model. This dual lipo battery charger is upgrade version of C150, twin-channel 2 in 1 charger, charge two different kinds of batteries simultaneously. High-power and high-performance circuit. Distributable circuit power in AC model: CH1+CH2=150W. In DC model each port circuit power can reach 120W. Please connect the charger with the main plug at first, then connect the main plug with the battery.
- Support Batteries--The rc charger supports charging, discharging and balance charging batteries: 1-6s LiPo LiFe LiHV Lilon,1-15s NiCd/NiMH, 2-20V PB and smart battery. Automatic identification of lithium batteries cells counts.Support multiple charging models. Please choose the right type of battery when charge. You can charge two different batteries at the same time, but please don't charge two different batteries at the same channel.
- Multi-extra Functions--Our lipo battery charger has multi-extra functions: 1.Battery meter- display lithium battery cell counts, total voltage, battery capacity percentage,each cell's voltage; 2. Lithium battery internal resistance checking; 3.Battery balance charge; 4.Adjustable digital DC power; 5. Suitable for Smart battery; 6.Cycle Charging; 7. Discharge. Please connect the charger with the main plug at first, then connect the main plug with the battery.
- Terminal Voltage Control--This dual lipo charger is allowed to set the charge/discharge voltage. Full plastic shell, safe, compact, beautiful. The built-in cooling fan comes with a power switch. This battery charger's shell is made of fire-proof material. Please don't use the AC cable and DC cable at the same time.
- Max Safety--Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit,temperature threshold. Data storage and loading: 20 memory data each channel. Support firmware upgrade. Tips: In order to heat dissipation, it is normal that the fans has sound.
- See more on Amazon...
Brand: Aorika | Manufacturer: Charger
Weight: 1.06 Pounds
See On Amazon #20
Hobby Fans B6 Mini Professional Balance Charger/Discharger with Power Supply for 1S-6S LiPo Lilon Life NiCd NiMh Pb RC Battery
Asin: B0B5LLVSRK | Ean: 8318369578934
Lcd Display - To Facilitate You To Choose The Mode You Need. This B6 Charger Has A Lcd Display, You Can View All Charging Status And Settings On The Charger Lcd Screen When You Browse The Mode And Select..
Package - 1 * B6 Balance Charger / 1 * Ac/Dc Adapter Power Supply / 5 * T Plug Charging Cable.
Multiple Functions - More Than A Regular Digital Balance Charger, B6 Comes With Features Like Li-Ion And Lipo Balancing, Fast Charging, Data Storage, Cyclic Charging, Discharging, And Much More For All Of Your Battery Packs..
Multiple Battery Compatibility - This B6 Charger Can Charge A Variety Of Rechargeable Batteries, Including Nicd/Nimh Batteries, Li-Ion Batteries, Lipo Batteries, Life Batteries, Lihv Batteries And Pb Batteries. This Is A Multifunctional Charger, You Only Need To Select The Correct Battery Type When Charging, It Is Very Convenient And Easy To Use..
Features
- High-quality and Safety - The B6 charger is made of high-quality chips and materials to provide you high-quality products and function performance, and the charger also has short-circuit protection, overcharge protection, overcurrent protection and overheat protection for safety design.it is very safe to buy.
- Multiple Battery Compatibility - This B6 charger can charge a variety of rechargeable batteries, including NiCd/NiMH batteries, Li-ion batteries, LiPo batteries, LiFe batteries, LiHV batteries and Pb batteries. This is a multifunctional charger, you only need to select the correct battery type when charging, It is very convenient and easy to use.
- LCD Display - To facilitate you to choose the mode you need. This B6 charger has a LCD display, you can view all charging status and settings on the charger LCD screen when you browse the mode and select.
- Multiple functions - More than a regular digital balance charger, B6 comes with features like Li-ion and LiPO balancing, fast charging, data storage, cyclic charging, discharging, and much more for all of your battery packs.
- PACKAGE - 1 * B6 Balance Charger / 1 * AC/DC Adapter Power Supply / 5 * T plug Charging Cable
- See more on Amazon...
Brand: Hobby Fans | Manufacturer: Hobby Fans
Dimensions: 1.06 x 3.46 x 5.28 inches | Weight: 0.47 pounds
Warranty: 30 days
See On Amazon
Looking For Something Else?
Search