Genmitsu 30pcs End Mills CNC Router Bits, 1/8'' Shank, Including 2-Flute Nano Blue Coat Flat Nose End Mill, Titanium Coat CNC Bits & 30 V-Groove Engraving Bits, MC30B
Asin: B09XMST8HV | Ean: 0816550025680 | UPC: 816550025680
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Corn-Shaped Titanium Coat End Mills -- Shank Diameter: 1/8'' (3.175Mm), Cutting Diameter: 3.175Mm, Cutting Length: 14Mm, Overall Length: 38Mm..
Wide Compatibility: The Mc30b End Mills Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, As Well As Other Industrial Cnc Machines. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
V-Groove Engraving Bits -- Degree: 30°, Shank Diameter: 1/8'' (3.175Mm), Cutting Diameter: 0.1Mm, Cutting Length: 16Mm, Overall Length: 27Mm..
2-Flute Nano Blue Coat Flat Nose End Mills -- Shank Diameter: 1/8'' (3.175Mm), Cutting Diameter: 3.175Mm, Cutting Length: 17Mm, Overall Length: 38Mm..
Features
- High Quality: Made of Tungsten Carbide Steel Alloy, which is high wear resistance and anti-impairment. Moreover, its Nano Blue Coating / Titanium Coating with high hardness and heat resistance provides longevity and produces cutting results of the highest quality.
- 2-Flute Nano Blue Coat Flat Nose End Mills -- Shank Diameter: 1/8'' (3.175mm), Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
- Corn-shaped Titanium Coat End Mills -- Shank Diameter: 1/8'' (3.175mm), Cutting Diameter: 3.175mm, Cutting Length: 14mm, Overall Length: 38mm.
- V-Groove Engraving Bits -- Degree: 30 , Shank Diameter: 1/8'' (3.175mm), Cutting Diameter: 0.1mm, Cutting Length: 16mm, Overall Length: 27mm.
- Wide Compatibility: The MC30B end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon Similar To Genmitsu 30pcs End Mills CNC
#1
Genmitsu 40pcs End Mills CNC Router Bits, 1/8" Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose, Nano Blue Coat & Titanium Coat, MC40A
Asin: B08CD99PWL | Model: MBS-001 | PartNumber: MBS-001 | Ean: 4897093844385
Two End Mill Sets -- Shank Diameter: 3.175Mm, Cutting Diameter: 0.8 - 3.0Mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0Mm), Cutting Length: 17Mm, Overall Length: 38Mm, With Nano Blue And Titanium Coating..
Wide Compatibility: The Mc40a End Mills Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device.
Applicable Materials: Widely Used In Various Materials Including Plastics, Aluminum, Circuit Board, Wood, As Well As Other Precision Parts Processing..
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175Mm, Cutting Diameter: 3.175Mm, Cutting Length: 17Mm, Overall Length: 38Mm..
Features
- High Quality: The Genmitsu end mills are made of ultra-fine 0.2 m tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
- Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
- Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
- Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.04 x 1.50 x 3.18 inches
See On Amazon #2
SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank
Asin: B07P7LGQJ6 | Ean: 4897093841353
➤Material: Using Ultra-Fine Grained Carbide Material, With Good Milling And Cutting Performance..
➤Genmitsu Cnc Bits Selection Guide: To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
➤Application: Pcb, Smt, Cnc, Mold, Plastic Fiber, Carbon Fiber, Hard Wood, Printed Circuit Board, And Other Precision Parts Processing..
: ➤Advantage: With Sufficient Flexural Strength And Wear Resistance, Which Ensure High Work Efficiency. Sharp Cutting Edge, Milling, Hole And Plate Edge, Clean Surface, Neat, No Glitches..
Features
- Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs.
- : Advantage: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Material: Using ultra-fine grained carbide material, with good milling and cutting performance.
- Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing.
- Genmitsu CNC Bits Selection Guide: To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- See more on Amazon...
Brand: SainSmart | Manufacturer: Genmitsu
Dimensions: 0.04 x 1.46 x 0.12 inches | Weight: 0.00 pounds
See On Amazon #3
Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm
Asin: B07P6K9BL3 | Ean: 0816550021620 | UPC: 816550021620
Controller Software: The Genmitsu 3018-Pro Uses Grbl, A High-Performance Open-Source Software For Controlling Movement, And Runs On Arduino. Its Dependability And Simplicity Make Grbl An Industry Standard, So There’S No Lack Of Support And Resources Available When You Get Stuck..
Note: Assembly Instructions And User Guide Are Provided, Please Find At The Product Guides And Documents Section Below And Get Everything You Might Need. If You Get Stuck, Check Out The Sainsmart Resource Center (See At User Guide) Or Contact Us With Any Questions That Arise..
Optional Upgraded Parts: Super Size Your 3018 Cnc To A 3040 By Getting A Genmitsu 3040 Y-Axis Extension Kit. The 3040 Aluminum Spoilboard And 3040 Mdf Spoilboard For This Extension Kit Are Also Available To Buy..
Upgraded Power Adapter: Ul Approved And Out-Of-The-Box Support For The Drop In 20,000Rpm Spindle, No Need To Modify G-Code To Ramp Up To Full Speed..
Features
- New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. The base height is raised to 4cm for better stability. Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVC, and PCB, the Genmitsu can be used on a wide range of projects and materials.
- Upgraded Power Adapter: UL Approved and out-of-the-box support for the drop in 20,000rpm Spindle, no need to modify G-code to ramp up to full speed.
- Controller Software: The Genmitsu 3018-PRO uses Grbl, a high-performance open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make GRBL an industry standard, so there s no lack of support and resources available when you get stuck.
- Optional Upgraded Parts: Super Size your 3018 CNC to a 3040 by getting a Genmitsu 3040 Y-Axis Extension Kit. The 3040 Aluminum Spoilboard and 3040 MDF Spoilboard for this extension kit are also available to buy.
- Note: Assembly Instructions and User Guide are provided, please find at the Product Guides and Documents Section below and get everything you might need. If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: SainSmart
Dimensions: 11.81 x 7.09 x 0.01 inches | Weight: 15.19 Pounds
See On Amazon #4
Genmitsu 30pcs PCB Drill Bits Set, 0.1mm-3.0mm, 1/8" Shank Spiral Flute CNC Router Bits for Print Circuit Board Jewelry CNC Engraving, PD30A
Asin: B08M5PLF48 | Model: 101-61S-PD30A | PartNumber: 101-61S-PD30A | Ean: 4897093845375
Advantage: With Spiral Flute Cutting Edge, These Pcb Drill Bits Can Reduce Cutting Force And Prevent The Drill From Broken And Improve Accuracy. They Work Quickly And Cleanly, With No Glitches Or Scrap Left..
30-Piece Combo Set: There Are 3 Sets Of Drill Bits (Set A: 0.1Mm-1.0Mm; Set B: 1.1Mm-2.0Mm; Set C: 2.1Mm-3.0Mm), Each Of 10 Pieces, And Each Set Has A Protective Box. It's Easy To Store And Carry..
Application: Suitable For Amber Beeswax, Printed Circuit Boards, 3D Printer Nozzle Cleaning, Plexiglass, Bakelite, Cnc Engraving, Jewelry, Plastic, And Other Precise Drilling. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
Various Sizes: 1/8'' Shank; Bits Diameter: 0.1Mm, 0.2Mm, 0.3Mm, 0.4Mm, 0.5Mm, 0.6Mm, 0.7Mm, 0.8Mm, 0.9Mm, 1.0Mm, 1.1Mm, 1.2Mm, 1.3Mm, 1.4Mm, 1.5M, 1.6Mm, 1.7Mm, 1.8Mm, 1.9Mm, 2.0Mm, 2.1Mm, 2.2Mm, 2.3Mm, 2.4Mm, 2.5Mm, 2.6Mm, 2.7Mm, 2.8Mm, 2.9Mm, 3.0Mm. This Set Contains 30 Different Size Drill Bits Diameter, Each Size Having1 Pcs..
Features
- High Quality: The PCB drill bits set are made of high-quality tungsten carbide steel alloy, which is high wear resistance, high hardness, anti-impairment. Seismic design on the blade edge enables it to stay stable during engraving.
- Various Sizes: 1/8'' shank; bits diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5m, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm, 2.5mm, 2.6mm, 2.7mm, 2.8mm, 2.9mm, 3.0mm. This Set contains 30 different size drill bits diameter, each size having1 pcs.
- Advantage: With spiral flute cutting edge, these PCB drill bits can reduce cutting force and prevent the drill from broken and improve accuracy. They work quickly and cleanly, with no glitches or scrap left.
- Application: Suitable for amber beeswax, printed circuit boards, 3D printer nozzle cleaning, plexiglass, bakelite, CNC engraving, jewelry, plastic, and other precise drilling. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- 30-piece Combo Set: There are 3 sets of drill bits (Set A: 0.1mm-1.0mm; Set B: 1.1mm-2.0mm; Set C: 2.1mm-3.0mm), each of 10 pieces, and each set has a protective box. It's easy to store and carry.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #5
Genmitsu 50pcs Tungsten Carbide End Mill Router Bits, 1/8'' Shank CNC Bit Set Including 2-Flute Straight Bit, Flat Nose & Ball Nose End Mill, PCB Drill & V-Groove Engraving Bits, Nano Blue Coat, MC50A
Asin: B09XMTKRL5 | Ean: 0816550025697 | UPC: 816550025697
Rich Sizes For Choose: 2-Flute Flat Nose & Ball Nose End Mills, 2-Flute Straight Router Bits, And Nano Blue Coating End Mills -- Cutting Diameter: (1-3.175Mm). Pcb Drill Bits -- Cutting Diameter: (1.1-2.0Mm)..
Wide Compatibility: The Mc50a End Mills Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, Proverxl 4030, 3020-Pro Max, As Well As Other Industrial Cnc Machines. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
Applicable Materials: Suitable For Such As Mdf, Pvc, Pcb, Acrylic, Wood, Solid Wood, Nylon, Resin, Plywood, Carbon Fiber, Amber Beeswax, Etc. Widely Used For 3D Relief Sculpting/2D Lettering/Cutting/Grooving/Slotting/Drilling/Hollowing/Positioning/Roughing/Milling..
Mixed Router Bit Set: 6 Kinds Of Bits In This Router Set, Which Include 10Pcs 2-Flute Flat Nose End Mills, 10Pcs 2-Flute Ball Nose End Mills, 10Pcs Nano Blue Coating End Mills, 10Pcs Pcb Drill Bits, 5Pcs V-Groove Engraving Bits, 5Pcs 2-Flute Straight Router Bits..
Features
- High Quality: Made of Tungsten Carbide Steel Alloy, which is high wear resistance and anti-impairment. Moreover, its Nano Blue Coating / Titanium Coating with high hardness and heat resistance provides longevity and produces cutting results of the highest quality.
- Mixed Router Bit Set: 6 kinds of bits in this router set, which include 10pcs 2-Flute Flat Nose End Mills, 10pcs 2-Flute Ball Nose End Mills, 10pcs Nano Blue Coating End Mills, 10pcs PCB Drill Bits, 5pcs V-Groove Engraving Bits, 5pcs 2-Flute Straight Router Bits.
- Rich Sizes for Choose: 2-Flute Flat Nose & Ball Nose End Mills, 2-Flute Straight Router Bits, and Nano Blue Coating End Mills -- Cutting Diameter: (1-3.175mm). PCB Drill Bits -- Cutting Diameter: (1.1-2.0mm).
- Applicable Materials: Suitable for such as MDF, PVC, PCB, Acrylic, wood, solid wood, Nylon, Resin, plywood, carbon fiber, amber beeswax, etc. Widely used for 3D relief sculpting/2D lettering/cutting/grooving/slotting/drilling/hollowing/positioning/roughing/milling.
- Wide Compatibility: The MC50A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, PROVerXL 4030, 3020-PRO MAX, as well as other industrial CNC machines. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #6
Genmitsu 1/4'' V Grooving Router Bit Set, 60 Degree & 90 Degree CNC Router Bits, 3D V Shape Milling Wood Cutter Knife CNC Engraving Router Bit, VG03A
Asin: B096B1TFSF | Model: VG03A | PartNumber: VG03A | Ean: 4897093846389
Versatile: V-Groove Bit Is Designed To Cut Deep Or Shallow V Grooves. The Bit Is Great For Sign Making Or For Adding Decorative Accents To Furniture And Plaques. With Good Milling, Cutting Performance, Ensure High Efficiency..
Wide Compatibility: The Vg03a Router Bits Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device..
Compatible Materials: These Router Bits Are Mainly Used For Acrylics And Plastics, Carbon Fiber, Chipboard, Laminated Veneers, Mdf, Pcb, Solid Surface, Wood And Wood Composite Materials..
Cost-Effective: Each Set Includes 3Pcs Of The V Groove Router Bits And 1Pcs Of 12Mm To 6Mm Router Collet. Shank Diameter: 1/4''(6.35Mm), Cutting Diameter: 1/2''（12.70Mm)、0.39''(10.00Mm)..
Features
- High Quality: These V groove router bits are made with premium tungsten carbide steel alloy, a highly durable material that is guaranteed to withstand the test of time.
- Cost-Effective: Each set includes 3pcs of the V groove router bits and 1pcs of 12mm to 6mm Router Collet. Shank diameter: 1/4''(6.35mm), cutting diameter: 1/2'' 12.70mm) 0.39''(10.00mm).
- Versatile: V-Groove Bit is designed to cut deep or shallow V grooves. The bit is great for sign making or for adding decorative accents to furniture and plaques. With good milling, cutting performance, ensure high efficiency.
- Compatible Materials: These router bits are mainly used for acrylics and plastics, carbon fiber, chipboard, laminated veneers, MDF, PCB, solid surface, wood and wood composite materials.
- Wide Compatibility: The VG03A router bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #7
Genmitsu CNC Router Machine 4040-PRO for Woodworking Metal Acrylic Cutting Milling, GRBL Control, Lead Screw Driven, 3 Axis CNC Engraving Machine, Working Area 400 x 400 x 78mm (15.7 x 15.7 x 3.1 )
Asin: B0BKSJJS34 | Model: 4040-PRO | PartNumber: 4040-PRO | Ean: 0816550026243 | UPC: 816550026243
Still Based On Open-Source Grbl V1.1, The 4040-Pro Cnc Router Has Stepped Up To More Powerful But Silent Toshiba Tb6s109 Drivers With 32-Bit Chips. Upgrades Include Extended Function Ports Like A Air Assistance Pump Port, And Mpg Port..
The 4040-Pro Cnc Machine Is Supplied With 42Mm And 52Mm Spindle Mounts. The Additional 65Mm (B0brzsy475), 69Mm (B0brzsvvk3) Spindle Mount, And Other Upgraded Accessories Are Available To Order. You Can Easily Upgrade The Machine According To Your Needs. If You Get Stuck, Check Out The Sainsmart Resource Centre (See User Guide) Or Contact Us With Any Questions You May Have..
It Supports Adding The 4Th-Axis Rotary Module Kit. The 4Th-Axis Kit Enables Your 4040-Pro Desktop Cnc To Carve From Different Angles And Positions Or With The Right Software Full 3D Rotary Caving..
All Main Parts Are Pre-Assembled And It Just Takes About 15 Minutes To Finish The Whole Machine Assembly. The Spoilboard Is Combined By Two Pieces Of Mdf Boards. Each Mdf Board Could Be Replaced Individually. You Don’T Need To Replace The Whole Spoilboard When A Panel Gets Damaged..
New Steel Hss Frame - All New Redesigned Frame Structure, Each Axis Is Composed Of Two 16Mm Steel Hss Linear Tubes And A Lead Screw Motion Drive, Dual Y Axis Rails, And All Metal Frame. This New High-Rigidity Structure Ensures The Stability And Accuracy Of The Milling Machine..
Features
- An effective working area of 15.7 x 15.7 x 3.1 is large enough for most daily wood carving projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height.
- New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the milling machine.
- Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a Air Assistance Pump Port, and MPG Port.
- All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don t need to replace the whole spoilboard when a panel gets damaged.
- The 4040-PRO CNC machine is supplied with 42mm and 52mm spindle mounts. The additional 65mm (B0BRZSY475), 69mm (B0BRZSVVK3) spindle mount, and other upgraded accessories are available to order. You can easily upgrade the machine according to your needs. If you get stuck, check out the SainSmart Resource Centre (see User Guide) or contact us with any questions you may have.
- It supports adding the 4th-axis rotary module kit. The 4th-axis kit enables your 4040-PRO desktop CNC to carve from different angles and positions or with the right software full 3D rotary caving.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #8
Genmitsu GS-775M 20000RPM 775 CNC Spindle Motor with 5mm ER11 Collet Set, CNC 3018 Upgraded Accessories, DC 24V, High Power, Noise Suppression, Electrical DC Motor for 3018 CNC Router Machine
Asin: B08DTHDSMV | Model: MR775 | PartNumber: MR775 | Ean: 0816550023723 | UPC: 816550023723
Pre-Installed Motor Noise Suppression Pcb Provides Enhanced Performance..
Double Ball Bearing Brush. Cw/Ccw Rotation..
It's Compatible With All 3018 Series Cnc Router. Applied To Lathes, Mills, Car Hoists, Pumps & Conveyors, Etc..
Experience A Quick And Easy Upgrade For Your Genmitsu Desktop Cnc..
Features
- DC: 24V. Speed: 20000/min.
- Experience a quick and easy upgrade for your Genmitsu Desktop CNC.
- Pre-installed motor noise suppression PCB provides enhanced performance.
- It's compatible with All 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc.
- Double ball bearing brush. CW/CCW rotation.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 1.03 Pounds
See On Amazon #9
Genmitsu 10 Pcs 1/8" Shank V-Groove CNC Router Bits, 10 /15 /20 /25 /30 /40 /45 /60 /90 Degree Set, Nano Blue Coat Conical V-Bit, Engraving Tool for CNC Signmaking Carving Lettering 2D&3D Sculpture
Asin: B0C7KPMQ5K | Model: VS10A | PartNumber: VS10A | Ean: 0816550027356 | UPC: 816550027356
Long Service Life: The Nano Blue Coating Strengthens The Hardness Of The Bits, Extending Their Service Life And Making Them More Durable And Wear-Resistant Than Regular Ones..
Wide Applications: These Bits Can Be Widely Used In Signmaking, Lettering, V Groove Miter Fold, Suitable For Use On Various Materials, Including Hardwood, Plywood, Acrylic, Plastic Fiber, Resin, Pcb, And Aluminum..
Durable & Well-Made: These V-Shape Bits Have Sharp Cutting Edges And Produce No Glitches On The Surface, Ensuring Excellent Engraving And Milling Performance..
Alloy Steel Construction: The Sharper Cutting Edge Helps Produce Neat Cuts, While The Alloy Steel Construction Provides Super Hardness, Wear Resistance, Break Resistance, And Corrosion Resistance For A Efficient Work..
Features
- All-in-one Kit: This pack contains 10 pieces with a 1/8 inch shank size and a variety of angles and tips (10/15/20/25/30/40/45/60/90/90 degree). Most bits are a common 0.1mm tip, except one of the 90-degree bits is a 0.3mm tip to meet your needs in a variety of ways.
- Alloy Steel Construction: The sharper cutting edge helps produce neat cuts, while the alloy steel construction provides super hardness, wear resistance, break resistance, and corrosion resistance for a efficient work.
- Long Service Life: The nano blue coating strengthens the hardness of the bits, extending their service life and making them more durable and wear-resistant than regular ones.
- Durable & Well-Made: These V-shape bits have sharp cutting edges and produce no glitches on the surface, ensuring excellent engraving and milling performance.
- Wide Applications: These bits can be widely used in signmaking, lettering, V Groove miter fold, suitable for use on various materials, including hardwood, plywood, acrylic, plastic fiber, resin, PCB, and aluminum.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #10
Genmitsu CNC Dust Shoe ABS Cover Cleaner for 3018 Series CNC Router/CNC Machines with a 42mm Diameter Motor, Hose Adapter Outer Diameter 38mm (1.5 ), Transparent
Asin: B09CSYLZ36 | Model: DS3018 | PartNumber: DS3018 | Ean: 0816550024881 | UPC: 816550024881
Two-Piece Magnetic Design: Durable, Light And Flexible, Convenient For Daily Use And Maintenance. Easy To Assemble And Install. Only Take 3 Steps To Finish The Installation..
The Planting Brush Is Much Tidy And Firmer Than Other Glued Ones. You Could Just Replace The Whole Bottom Cover When The Brush Is Worn. Don’T Need To Spend Much Time Removing And Adding A New Brush (If The Brush Is Too Long For Your Bits, We Suggest That You Could Trim It Off From The Bottom According To The Bits Length Or Order A Replacement Base Bottom Cover With 20Mm Long Nylon Brush)..
The Split Design Makes It Much Easier To Replace Bits. You Only Need To Pop Off The Bottom Cover When Replacing Your Bits, No Tools Required , And Avoid Other Complicated Procedures..
This Dust Shoe Is Made Of High-Quality Transparent Abs . The Transparent Design Helps You Keep An Eye On Your Operations. Equipped With A 40Mm Long Nylon Brush To Maximize Vacuum Suction And Help Act As A Dust Sweep With High Dust Removal Efficiency. Keep Your Machine And Work Area Clean While Cutting, Drilling, And Carving..
Features
- Compatible with Genmitsu 4040-PRO and most 3018 series CNC machines on the market, including 3018-PRO, 3018-PROVer, 3018-PROVer Mach3 and 3018-MX3. Just make sure that your spindle diameter is 42mm (1.65 ) and with two 4mm (0.16 ) screw holes.
- This dust shoe is made of high-quality transparent ABS . The transparent design helps you keep an eye on your operations. Equipped with a 40mm long nylon brush to maximize vacuum suction and help act as a dust sweep with high dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
- Two-Piece Magnetic Design: Durable, light and flexible, convenient for daily use and maintenance. Easy to assemble and install. Only take 3 steps to finish the installation.
- The split design makes it much easier to replace bits. You only need to pop off the bottom cover when replacing your bits, no tools required , and avoid other complicated procedures.
- The planting brush is much tidy and firmer than other glued ones. You could just replace the whole bottom cover when the brush is worn. Don t need to spend much time removing and adding a new brush (If the brush is too long for your bits, we suggest that you could trim it off from the bottom according to the bits length or order a Replacement Base Bottom Cover with 20mm long nylon brush).
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #11
Genmitsu EVA CNC Milling Bit Storage Tray with 85 Holes, 200mm x 200mm x 43mm
Asin: B08P2P2KY8 | Ean: 4897093845863
This Compact Box Helps You Group Your Bits, Little Gadgets And Tools In Order, Making Your Workbench Clear And Neat. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
Tips: In Order To Avoid Injury When Removing The Router Bits, Please Wear Gloves When Replacing The Router Bits, Or Place The Router Bits In Reverse..
Open Design Allows Quick Bit Change To Remove Or Replace When Working With Cnc Machines..
Made Of High-Quality Eva(Ethylene-Vinyl Acetate Copolymer), The Bit Holder Is Extra Durable And Long-Lasting..
Features
- 3 types of hole diameter to meet different needs, 85 holes in total. 40 holes with diameter 1/8"; 30 holes with diameter 1/4"; 15 holes for 11.5mm ER11 collets.
- Made of high-quality EVA(Ethylene-vinyl acetate copolymer), the bit holder is extra durable and long-lasting.
- This compact box helps you group your bits, little gadgets and tools in order, making your workbench clear and neat. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- Open design allows quick bit change to remove or replace when working with CNC machines.
- Tips: In order to avoid injury when removing the router bits, please wear gloves when replacing the router bits, or place the router bits in reverse.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Weight: 0.22 pounds
See On Amazon #12
Genmitsu 65mm Diameter Aluminum CNC Spindle Holder Spindle Mount for 3018-PRO, 4040-PRO, 4040 Reno, 3020-PRO MAX V2, 3030-PROVer MAX, 3018-PROVer V2 CNC Machine and Aluminum Z Axis Assembly V2 Kits
Asin: B0BRZSY475 | Model: ZC65 | PartNumber: ZC65 | Ean: 0816550026649 | UPC: 816550026649
Reliable Performance: Increased Stability And Less Operating Noise. Robust Mounting Screw Pattern Ensures Your Spindle Is Level At All Times..
Dimension: Outside Dimension: 88X91x36mm; Diameter: 65Mm.
Easy Installation: Quick Swap Of Just 4 Screws After Removing The Stock Carriage..
High Quality Materials: The Spindle Carriage Is Made Of Precision Machined Aluminum For Better Rigidity And Durability. High Strength And A Long Service Life..
Features
- Quick Upgrade: Designed for the PRO series including 3018-PRO, 4040-PRO, 3020-PRO MAX V2, 4040 Reno, and PROVer series including 3018-PROver V2, 3030-PROVer MAX CNC machine and Genmitsu Aluminum Z Axis Assembly V2 kits. Step up your CNC router with a more powerful router and this 65mm spindle mount.
- High Quality Materials: The spindle carriage is made of precision machined aluminum for better rigidity and durability. High strength and a long service life.
- Reliable Performance: Increased stability and less operating noise. Robust mounting screw pattern ensures your spindle is level at all times.
- Easy Installation: Quick swap of just 4 screws after removing the stock carriage.
- Dimension: Outside Dimension: 88x91x36mm; Diameter: 65mm
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #13
Genmitsu 4040 Reno CNC Router Milling Machine for Woodworking Acrylic Cutting, Belt Driven, Quieter Movement, Wood Metal Carving Cutter Engraver, Working Area 15.75 x 15.75 x 3
Asin: B0CT551BMC | Model: 4040RENO | PartNumber: 4040RENO | Ean: 0816550028780 | UPC: 816550028780
Sturdy Axis Structure For Stability: Say Goodbye To Wobbly Cuts With Our Redesigned Axis Structure. The Double Y-Axis Setup And Solid Xz Frame Provide Robust Support For Your Projects, Big Or Small. With A Two-Stage Z-Axis Design That Minimizes Movement, You Can Trust This Machine To Deliver Precise Results Every Time..
Easy Integration With Grbl For Arm32 1.1F: Seamlessly Connect To Your Favorite Cad/Cam Software With Our Grbl Integration. This Open-Source Technology Ensures Compatibility With Leading Programs And 4-Axis Interfaces, Making It Easy To Bring Your Designs To Life. Whether You're Carving Wood Or Making Signs, This Desktop Cnc Is Your Reliable Partner In Creativity..
Flexible Accessories For Endless Possibilities: Customize Your Machine To Suit Your Needs With Our Range Of Eco-Friendly Accessories. Easily Mount 42Mm & 52Mm Spindles And Explore Upgrade Options For 65Mm Or 69Mm Compatibility. From Spindles To Router Modules, There's No Limit To What You Can Create..
Smart Belt Design For Smooth Operation: Enjoy Smooth And Quiet Operation With Our Clever Belt System. It Ensures Precise Cuts With An Accuracy Of ±0.1Mm On The Xy Axis, Without The Hassle Of Constant Adjustments. Plus, We've Got You Covered With A Complete Set Of V-Cutting Bits To Tackle Most Jobs With Ease..
Features
- Simple Setup, Expanded Functionality: Get started quickly with the Genmitsu 4040 Reno's easy modular setup and tough metal build. It offers a good-sized workspace of 400 x 400 x 76mm, perfect for all kinds of woodworking projects. Whether you're a beginner or a DIY enthusiast, its solid aluminum parts and strong motor make it a reliable choice for your workshop.
- Smart Belt Design for Smooth Operation: Enjoy smooth and quiet operation with our clever belt system. It ensures precise cuts with an accuracy of 0.1mm on the XY axis, without the hassle of constant adjustments. Plus, we've got you covered with a complete set of V-cutting bits to tackle most jobs with ease.
- Sturdy Axis Structure for Stability: Say goodbye to wobbly cuts with our redesigned axis structure. The double Y-axis setup and solid XZ frame provide robust support for your projects, big or small. With a two-stage Z-axis design that minimizes movement, you can trust this machine to deliver precise results every time.
- Flexible Accessories for Endless Possibilities: Customize your machine to suit your needs with our range of eco-friendly accessories. Easily mount 42mm & 52mm spindles and explore upgrade options for 65mm or 69mm compatibility. From spindles to router modules, there's no limit to what you can create.
- Easy Integration with Grbl for ARM32 1.1f: Seamlessly connect to your favorite CAD/CAM software with our Grbl integration. This open-source technology ensures compatibility with leading programs and 4-axis interfaces, making it easy to bring your designs to life. Whether you're carving wood or making signs, this desktop CNC is your reliable partner in creativity.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 11.02 x 33.46 x 11.81 Inches
See On Amazon #14
Genmitsu CNC MDF Spoilboard Table for 3018 CNC Router Machine, 30 x 18 x 1.2cm (11-4/5''x 7''x 1/2''), M6 Holes (6mm), Screws and Nuts Included
Asin: B08LD1XG3F | Model: SP3018 | PartNumber: SP3018 | Ean: 0816550024010 | UPC: 816550024010
Compatibility: Perfectly Compatible With All 3018 Series Cnc Router Kits Except The 3018-Prover V2.
Application: Usually Used When Cutting Or Carving Wooden Materials. The Mdf Spoilboard Is Used As A Base To Cut On So That Your Cnc Table Is Not Damaged By The Cutting Tools. It Can Ensure The Stability Of The Cutting Material, Thereby Achieving More Precise Cutting.
Material: Mdf (Medium-Density Fibreboard). Mdf Is Very Dense Translating Into More Weight With Enhanced Strength And Durability. Size Is 30 X 18 X 1.2Cm (11-4/5''X 7''X 1/2'').
Features
- A spoilboard is a disposable workbench mounted above the router's table. It can protect the router table from damage as well as being an expendable surface that can participate in workholding.
- Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 18 x 1.2cm (11-4/5''x 7''x 1/2'')
- Compatibility: Perfectly compatible with ALL 3018 Series CNC Router Kits except the 3018-PROVer V2
- Application: Usually used when cutting or carving wooden materials. The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #15
SainSmart Genmitsu 10Pcs Nano Blue Coat Flat Nose End Mill CNC Router Bits, 1/8" Shank Spiral Upcut 2 Flute End Mill Set (3.175 x 17 x 38mm)
Asin: B07PBDJ9MG | Ean: 4897093841377
Advantage: Sharp Cutting Edge, Milling, Hole And Plate Edge, Clean Surface, Neat, No Glitches..
Application: Great For 3D Relief Sculpturing, Cutting, Engraving, Slotting, Milling, Etc..
Suitable Material: Nylon, Resin, Abs, Acrylic, Pvc, Mdf, Hardwood..
Cutting Edge Diameter (Ced): 3.175Mm (1/8") Approx..
Features
- Number of Flutes: 2
- Cutting Edge Diameter (CED): 3.175mm (1/8) approx.
- Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Suitable Material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood.
- Application: Great for 3D relief sculpturing, cutting, engraving, slotting, milling, etc.
- See more on Amazon...
First Available: 01/01/2024
Brand: SainSmart | Manufacturer: Genmitsu
See On Amazon #16
Genmitsu CNC Router Machine PROVerXL 4030 for Wood Metal Acrylic MDF Carving Arts Crafts DIY Design, 3 Axis Milling Cutting Engraving Machine, Working Area 400 x 300 x 110mm (15.7''x11.8''x4.3'')
Asin: B08L6314MW | Model: PROVerXL 4030 | PartNumber: PROVerXL 4030 | Ean: 0816550023525 | UPC: 816550023525
No Additional Parts Required: Everything You Need Out Of The Box, No Stripped Down Kits Or Addons, The Genmitsu Proverxl 4030 Cnc Router Already Includes All Of The Accessories And Components You Need At An Affordable Price, Including Xyz Axis Limit Switches, Emergency Stop Switches,Speed Control, Z-Probe And More..
Built To Suit Your Needs: The Proverxl Cnc Platform Is Just The Beginning, If You Are Looking For An Even Larger Machine Get The Upgrade Kit Available In 2 Additional Sizes 24”X 24”( 600 X 600Mm), And Up To 40” X 40” (1000 X 1000Mm). Equip Your Machine With High Powered Laser Modules With Up To 15W Of True Power Output. Evolve With Your Cnc, Upgrade As You Go, Or Start Big And Get To Making More..
Precision And Performance: Rigid C-Beam Structure,Leadscrew Driven, Y-Axis Dual Screw Drive, Z-Axis Optical Axis Drive Delivers More Stability Than The Traditional V-Slot Drive. It's Ideal For An Endless Variety Of Cutting, Drilling, And Carving Operations On Various Materials Including Wood, Mdf, Plastics, Foams, Vinyl, And Aluminum..
More Power: New Completely Redesigned Control Box And Drive System, Beefy C-Beam Frame, Precision Nema 23 Stepper Motors, High Power Spindle And Included Adapter For A Drop In Dewalt Dwp611 Upgrade..
Features
- Easy to Set Up: The pre-assembled module of XYZ axis and wires dramatically reduces effort of assembly, allowing you to start carving your projects in less time. 3-Month Carveco Maker Subscription is included. Turning your ideas into the next fun project or your own work of art will be much easier with Carveco Maker. We will email you the subscription link after you place the order.
- More Power: New completely redesigned control box and drive system, beefy C-BEAM Frame, precision NEMA 23 stepper motors, High Power Spindle and included adapter for a drop in Dewalt DWP611 upgrade.
- No additional parts required: Everything you need out of the box, no stripped down kits or addons, the Genmitsu PROVerXL 4030 CNC router already includes all of the accessories and components you need at an affordable price, including XYZ axis limit switches, emergency stop switches,speed control, Z-probe and more.
- Precision and Performance: Rigid C-beam structure,Leadscrew Driven, Y-axis Dual screw drive, Z-Axis Optical Axis Drive delivers more stability than the traditional v-slot drive. It's ideal for an endless variety of cutting, drilling, and carving operations on various materials including wood, MDF, plastics, foams, vinyl, and aluminum.
- Built to suit your needs: The PROVerXL CNC platform is just the beginning, if you are looking for an even larger machine get the upgrade kit available in 2 additional sizes 24 x 24 ( 600 x 600mm), and up to 40 x 40 (1000 x 1000mm). Equip your machine with High Powered Laser Modules with up to 15W of true power output. Evolve with your CNC, upgrade as you go, or start big and get to making MORE.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 15.75 x 4.33 x 0.01 Inches
See On Amazon #17
Genmitsu 3030-PROVer MAX CNC Router Machine with Linear Guide & Ball Screw Motion, Achieve 0.05mm Accuracy for High Precision Metal Aluminum Copper Acrylic Engraving, Supports 4th Axis Rotary Kit
Asin: B0CH9KCQ6C | Model: 3030 | PartNumber: 3030 | Ean: 0816550027240 | UPC: 816550027240
Assemble Down To 10 Min: Easy To Assemble Indexed Parts With The Y-Axis Enables Easy Alignment And Balance During Assembly That Includes A Dust-Proof Cover For Each Linear Guide And Ball Screw With The X And Y Axis, Simplifying Maintenance..
Expand Your Horizons: Unlock The Potential Of 3D Rotary Carving With The 3030-Prover Max's Support For A 4Th Axis Module, Allowing You To Create Captivating Designs From Different Angles And Positions..
Enhanced Control At Your Fingertips: The New Single Knob Offline Controller Puts The Power In Your Hands, Providing Precise Control Over Your Work With An Easy To Access Emergency Stop Button For Added Safety..
Precision Refined: Experience Exceptional Accuracy Down To 0.05Mm, Made Possible By The Dual Linear Guides And Ball Screws Integrated Into The X, Y, And Z Axis Of This Cutting-Edge Cnc Machine..
Features
- Carving Metal with Ease: Master your metalworking workflow with the 3030-PROVer MAX Desktop CNC Router, effortlessly cut 2mm thick aluminum stock along with other materials and thicknesses right from your desktop.
- Precision Refined: Experience exceptional accuracy down to 0.05mm, made possible by the dual linear guides and ball screws integrated into the X, Y, and Z axis of this cutting-edge CNC machine.
- Assemble down to 10 min: Easy to assemble indexed parts with the Y-axis enables easy alignment and balance during assembly that includes a dust-proof cover for each linear guide and ball screw with the X and Y axis, simplifying maintenance.
- Enhanced Control at Your Fingertips: The new single knob offline controller puts the power in your hands, providing precise control over your work with an easy to access emergency stop button for added safety.
- Expand Your Horizons: Unlock the potential of 3D rotary carving with the 3030-PROVer MAX's support for a 4th axis module, allowing you to create captivating designs from different angles and positions.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 16.22 x 20.59 x 20.59 inches
See On Amazon #18
Genmitsu Upgraded CNC Router Photoelectric Z-Axis Tool Setting Touch Probe with indicators, Compatible with Genmitsu 3018-PROVer V2, 4040-PRO, 4040 Reno, 3020-PRO MAX V2 CNC machine
Asin: B0BRZSSKXN | Model: Z Probe | PartNumber: Z Probe | Ean: 0816550026588 | UPC: 816550026588
It Is The Photoelectric Z-Probe, Which Works More Accurately..
Makes Setting Tool Height A Breeze, No More Using The Paper. Auto-Check Setting Probe..
The Two Indicators Will Save You Time In The Setup Process. The Blue Indicator Will Light On When The Z-Axis Touch Probe Connects To The Control Board, And The Red One Will Light On When The Cnc Bits Touch The Z Probe..
With A Mouse Click, Cnc Machines Will Automatically Return To A Predefined Position, Allowing You To Easily Change And Calibrate Your Tools..
Features
- Compatible with Genmitsu CNC Machine 3018-PROVer V2, 4040-PRO, 4040 Reno and 3020-PRO MAX V2.
- With a mouse click, CNC machines will automatically return to a predefined position, allowing you to easily change and calibrate your tools.
- It is the photoelectric Z-probe, which works more accurately.
- The two indicators will save you time in the setup process. The blue indicator will light on when the Z-Axis Touch Probe connects to the control board, and the red one will light on when the CNC bits touch the Z probe.
- Makes setting tool height a breeze, no more using the paper. Auto-Check setting probe.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #19
Genmitsu 5PCS V-Groove CNC Router Bits, Degree 20/30/45/60, 1/8'' Shank Nano Blue Coating End Mills, for Wood Carving Milling, VG05B
Asin: B09JBN5NR7 | Model: 005853352 | PartNumber: 005853352 | Ean: 0816550025383 | UPC: 816550025383
Shank Diameter: 1/8” (3.175Mm); Cutting Diameter: 3.175Mm.
Wide Applications: Widely Used To Engrave On Acrylics, Mdf, Plastics, Solid Woods, Etc..
Cost Effective: The V Shape Bits Are Good At Letting And Sign Making. This Set Of V-Groove Cnc Router Bits Includes 4 Different Degrees (20, 30, 45, 60), Which Is Commonly Used In 2D Engraving And 3D Sculpting..
Nano Blue Coating: The Hardness And Heat Resistance Of The Bits Are Enhanced With The Nano Blue Coating. It Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality..
Features
- High Quality: The Genmitsu 5PCS V-Groove CNC Router Bits are made of ultra-fine 0.2 m tungsten carbide steel alloy that can keep continuous machining 800 minutes.
- Nano Blue Coating: The hardness and heat resistance of the bits are enhanced with the Nano Blue Coating. It enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Shank Diameter: 1/8 (3.175mm); Cutting Diameter: 3.175mm
- Cost Effective: The V shape bits are good at letting and sign making. This set of V-Groove CNC Router Bits includes 4 different degrees (20, 30, 45, 60), which is commonly used in 2D engraving and 3D sculpting.
- Wide Applications: Widely used to engrave on Acrylics, MDF, Plastics, Solid Woods, etc.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #20
Genmitsu 710W Compact Router 65mm Diameter, 6 Variable Speeds Palm Trimmer Router, with ER11 Collet & 4 Carbon Brushes, Spindle Motor Upgrade for CNC Machines
Asin: B0CR178DFB | Model: GM7100E | PartNumber: GM7100E | Ean: 0816550029251 | UPC: 816550029251
Built To Last: Equipped With Long-Life Carbon Brushes, Our 710W Compact Router Is Designed For Durability. We Include 4 High-Quality Spare Carbon Brushes, So Your Machine Runs Smoothly For Extended Periods..
Easy To Upgrade: Featuring A 65Mm Diameter, Our Router Is Conveniently Compatible With Most Cnc Engraving Machines On The Market, Offering Customers An Easy Upgrade Option..
Convenient Power Cord: With A 3.5M (11.48 Ft) Power Cord, Our Router Offers Flexibility In Larger Workspaces. And With The Included Extension Connector, Adjusting The Length To Fit Your Workspace Is A Breeze..
Precision Engineering: Comes With A Customized 1/8” Er11 Collet And Nut, Ensuring That The Bit Is Held Securely And Precisely Centered Within The Collet. Get Precise Results Every Time. Compatible With Shank Diameters Ranging From 1-8Mm To 1/4”, But Please Note That 1/4” And 1-8Mm Collets Are Not Included..
Features
- Reliable Performance: This Compact Router packs a punch with its robust 710W power output. Featuring a rotation speed range of 6500-30000 RPM adjustable in 1-6 speeds and constant torque control with a soft start, it ensures smooth operation even under heavy loads.
- Precision Engineering: Comes with a customized 1/8 ER11 collet and nut, ensuring that the bit is held securely and precisely centered within the collet. Get precise results every time. Compatible with shank diameters ranging from 1-8mm to 1/4 , but please note that 1/4 and 1-8mm collets are not included.
- Built to Last: Equipped with long-life carbon brushes, our 710W Compact Router is designed for durability. We include 4 high-quality spare carbon brushes, so your machine runs smoothly for extended periods.
- Convenient Power Cord: With a 3.5m (11.48 ft) power cord, our router offers flexibility in larger workspaces. And with the included extension connector, adjusting the length to fit your workspace is a breeze.
- Easy to Upgrade: Featuring a 65mm diameter, our router is conveniently compatible with most CNC engraving machines on the market, offering customers an easy upgrade option.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 5.12 x 13.39 x 7.87 Inches
See On Amazon
Looking For Something Else?
Search