BZBMGMO Tailstock Alignment Tool, Lathe Tailstock Tool
Asin: B09Y1D16YJ | Model: BZ-75 | PartNumber: BZ-75
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Tool Is Mostly Steel And Rugged. The Slotted Bar Is 3/8" Thick X 3/4" Wide X Approximately 5" Long. The Slot Is 1/4" Wide By 3 Plus Inches Long. A Piece Of 5/8" Diameter X 2" Long Cold Rolled Steel Round Bar Fits Into Your Chuck. The Indicator Post Is 5/8" Diameter 6061 Aluminum.
Use The Mount With The Aluminum Post Installed For A Back Lug Indicator . Use The Mount With The Post Removed For The Starrett Indicator. Simply Insert Your Starrett Indicator Into The Post Hole And Tighten The Cross Drilled Screw To Secure It.
You Indicate Around The Stock To Center It. Always Check That Your Quill And Morse Taper Are Concentric. If They Are Not Concentric, You Will Need A Good Quality Ground Drill Arbor. Insert The Drill Arbor Into The Morse Taper Of Your Tailstock And Indicate It.
Features
- The dial indicators shown are NOT included. You simply mount YOUR OWN standard back lug indicator or a Starrett plunger style indicator to the mount to quickly line up your headstock spindle to tailstock by sweeping around both sides of your tailstock quill. If your headstock is already in alignment with your ways just chuck this tool and perfectly set your tailstock alignment. This is the same method used to find the center of a piece of round stock in a manual mill
- You indicate around the stock to center it. Always check that your quill and Morse Taper are concentric. If they are not concentric, you will need a good quality ground drill arbor. Insert the drill arbor into the Morse Taper of your tailstock and indicate it
- This tool is mostly steel and rugged. The slotted bar is 3/8 thick x 3/4 wide x approximately 5 long. The slot is 1/4 wide by 3 plus inches long. A piece of 5/8 diameter x 2 long cold rolled steel round bar fits into your chuck. The indicator post is 5/8 diameter 6061 aluminum
- Use the mount with the aluminum post installed for a back lug indicator . Use the mount with the post removed for the Starrett indicator. Simply insert your Starrett indicator into the post hole and tighten the cross drilled screw to secure it
- See more on Amazon...
Brand: BZBMGMO | Manufacturer: BZBMGMO
See On Amazon Similar To BZBMGMO Tailstock Alignment Tool Lathe
#1
Indexable Lathe Turning Tool 21Pcs Kit 3/8'' 10mm Shank 7Pcs Metal Lathe Tools Holder Set with 14Pcs Turning Inserts for Turning Grooving Threading Boring Carbide Inserts Carbide Turning Tool
Asin: B0BYZJG3BW | Model: 7pcs 3/8'' 10mm Shanks+14pcs Inserts | PartNumber: 7pcs 3/8'' 10mm Shanks+14pcs Inserts | Ean: 0602835344252 | UPC: 602835344252
Achieve Precision Machining: Elevate Your Projects With Our 21Pcs Indexable Lathe Turning Tool Set, 7 Holders And 14 Inserts. Enjoy Seamless, High-Precision Cutting, Whether You're A Pro Or A Diy Enthusiast..
Durable And Customer-Centric: Our Turning Tool Holders Are Shock-Proof, User-Friendly, And Backed By A Satisfaction Guarantee. Achieve Your Machining Goals With Ease, And We're Here To Assist You. We Provide 24H Support, 3Months Refund, 360Days Warranty. Don't Hesitate–Get Yours Now!.
Versatile Inserts For All Materials: Our Carbide Inserts With Cvd Coating Tackle Stainless Steel, Steel, And More. Experience Sturdy, Wear-Resistant, And Smooth Cutting In All Your Projects..
Precision Cutting, Every Angle Covered: With 7 Different Angles, Achieve Perfection Effortlessly. Turn Your Ideas Into Reality With Confidence Using Our Meticulously Designed Tools..
Top-Notch Quality For Endurance: Crafted From Cemented Carbide And Tungsten Steel, Our Turning Holders Offer Superior Hardness And Speed. No More Constant Tool Changes–These Tools Are Built To Last..
All-In-One Machining Solution: We're Your Go-To Universal Toolkit For Precision Turning. Each Package Includes Seven Essential Products: Snr0010k11, S10k-Sclcr06, Ser1010h11, Sdjcr1010h07, Sdncn1010h07, Sclcr1010h06, Mgehr1010-2. No Matter The Project, You'll Have The Right Tool At Your Fingertips..
Features
- Patent Pending Our tool design is innovative and our parent company is currently applying for patent protection. Any unauthorized copying or imitation will be subject to legal sanctions. If any infringement is discovered, we will take all necessary measures to safeguard our rights.
- All-in-One Machining Solution: We're your go-to universal toolkit for precision turning. Each package includes seven essential products: SNR0010K11, S10K-SCLCR06, SER1010H11, SDJCR1010H07, SDNCN1010H07, SCLCR1010H06, MGEHR1010-2. No matter the project, you'll have the right tool at your fingertips.
- Achieve Precision Machining: Elevate your projects with our 21pcs Indexable Lathe Turning Tool Set, 7 holders and 14 inserts. Enjoy seamless, high-precision cutting, whether you're a pro or a DIY enthusiast.
- Top-Notch Quality for Endurance: Crafted from cemented carbide and tungsten steel, our turning holders offer superior hardness and speed. No more constant tool changes these tools are built to last.
- Versatile Inserts for All Materials: Our carbide inserts with CVD coating tackle stainless steel, steel, and more. Experience sturdy, wear-resistant, and smooth cutting in all your projects.
- Precision Cutting, Every Angle Covered: With 7 different angles, achieve perfection effortlessly. Turn your ideas into reality with confidence using our meticulously designed tools.
- Durable and Customer-Centric: Our turning tool holders are shock-proof, user-friendly, and backed by a satisfaction guarantee. Achieve your machining goals with ease, and we're here to assist you. We provide 24h support, 3months refund, 360days warranty. Don't hesitate get yours now!
- See more on Amazon...
Brand: Joogto | Manufacturer: Joogto
Dimensions: 6.50 x 4.50 x 4.00 inches
Warranty: 24h Technical Support/36-Months Warrenty/90-Days Unconditional Refund
See On Amazon #2
VINWOX SCR4-4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1"x8TPI thread & 3/4"x16TPI Adapter, 3 Years Warranty
Asin: B088BCMLT7 | Model: SCR4-4 | PartNumber: SCR4-4 | Ean: 0617748908194 | UPC: 617748908194
✅4" Sturdy Steel Body With Electric Plating For Long Term Anti-Rust Performance. Both Sides Of Jaw Teeth And Guides Are Ground And Hardened For Long And Stable Service Life. All Guideways And Bearing Surfaces Are Precisely Machined.
✅Stable Service And Long Life: Vinwox Gear Chuck Made From High Grade K1045 Steel Machined To Allow Closest Tolerances Is With Electric Plating For Long Term Anti-Rust Performance. Both Sides Of Jaw Teeth And Guides Are Ground, All Guideways And Bearing Surfaces Are Precisely Machined For Stable Service And Long Life.
✅Scroll Chuck Perfect For Holding Bowls, Spindles, And Other Unwieldy Wood Lathe Projects. Widely Used For Machine Tools And Accessories For General Lathes And Industrial Machines.
✅Internal Jaws Tighten Around Workpieces Varying From 1-1/2" To 3" (Or 3" Square Block). External Jaws Spread Inside Of Workpieces With Pilot Holes Ranging From 2" To 3-5/8" Included Screw Chuck Provides Even More Options For Supporting Your Projects.
Features
- Products include: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first.
- Internal jaws tighten around workpieces varying from 1-1/2 to 3 (or 3 Square Block). External jaws spread inside of workpieces with pilot holes ranging from 2 to 3-5/8 Included screw chuck provides even more options for supporting your projects
- 4 sturdy steel body with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined
- Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines
- Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #3
Oudtinx Woodworking MT2 Heavy Duty Live Tailstock Center
Asin: B07PBVLQLQ | Model: ousku_Met38 | PartNumber: ousku_Met38 | Ean: 0656664645059 | UPC: 656664645059
Huge Live Center For Heavy Duty Workpieces.
Cone Is 2-1/2" By 1-11/16" Overall Diameter.
Ball Bearing Precision; Turns Smoothly.
60-Degree Point.
Features
- Large live lathe center
- 60-degree point
- Huge live center for heavy duty workpieces
- Ball bearing precision; turns smoothly
- Cone is 2-1/2 by 1-11/16 overall diameter
- See more on Amazon...
Brand: Oudtinx | Manufacturer: Oudtinx
See On Amazon #4
VEVOR Mini Lathe Machine, 2.76 in x 6.3 in, 24VDC 96W Mini Wood Lathe Tools Milling Machine Accessories, 7 Speeds 4220/5300/5650/6350/6660/7050/8450 RPM, for DIY Woodworking Wood Drill Rotary Tool
Asin: B0C9J2Z22R | Model: HS001 | PartNumber: HS001 | Ean: 0840349921464 | UPC: 840349921464
Powerful Motor: The Mini Lathe Features A 96W High-Frequency Motor, Delivering A Maximum Speed Of 8500 Rpm, Allowing Users To Easily Perform High-Speed Cutting And Planning, Enhancing Work Efficiency And Processing Quality..
Comprehensive Accessories: A Complete Set Of Rich Accessories Including An Adapter, Power Cord, Allen Wrench, Ball Fixing Pin, Hexagonal Bead Fixing Needle, Sandpaper For Polishing, And More, Embarking On An Endless Journey Of Creative Woodworking..
7-Speed Control: Choose From 7-Speed Options Between 4220 Rpm And 8500 Rpm To Meet Different Cutting Speed Requirements, Thus Achieving Precise Control Over Your Woodworking Projects..
Sturdy & Stable: Featuring A High-Quality Aluminum Alloy Base And A Solid Steel Headstock, Our Mini Lathe Machine Minimizes Vibrations, Ensuring Precise And Stable Operations..
Features
- Lightweight DIY: Compact and portable design with powerful capabilities, our mini wood lathe caters to the needs of home DIY enthusiasts, providing convenient woodworking solutions. Note: This device is suitable for cork turning, please ensure that it does not exceed the rated power for use.
- Sturdy & Stable: Featuring a high-quality aluminum alloy base and a solid steel headstock, our mini lathe machine minimizes vibrations, ensuring precise and stable operations.
- Powerful Motor: The mini lathe features a 96W high-frequency motor, delivering a maximum speed of 8500 RPM, allowing users to easily perform high-speed cutting and planning, enhancing work efficiency and processing quality.
- 7-Speed Control: Choose from 7-speed options between 4220 RPM and 8500 RPM to meet different cutting speed requirements, thus achieving precise control over your woodworking projects.
- Comprehensive Accessories: A complete set of rich accessories including an adapter, power cord, Allen wrench, ball fixing pin, hexagonal bead fixing needle, sandpaper for polishing, and more, embarking on an endless journey of creative woodworking.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 3.15 x 13.78 x 2.36 inches
See On Amazon #5
Mini Parting Tool Cut off Holder with 6Pcs HSS Blades for Mini Lathes 8mm Shank
Asin: B07KZNCG1C | Model: AAA-240 | PartNumber: AAA-240
Factory Mini Parting Tool Cut Off Holder With 6Pcs Hss Blades For Mini Lathes - 8Mm Shank.
Features
- IDEAL FOR MINI SMALL LATHE RIDGED CLAMPING IS ASSURED BLADE HSS GRADE"
- Factory Mini Parting Tool Cut off Holder with 6Pcs HSS Blades for Mini Lathes - 8mm Shank
- See more on Amazon...
Brand: LEGLO | Manufacturer: LEGLO
See On Amazon #6
SENDUO 10PCS 1/4" Metal Lathe Tooling Carbide Tip Tipped Cutter Tool,C6 Bit Cutting Set,for Metal Lathe Turning, Boring, and Chamfering
Asin: B0986T9VXW | Model: 1 | PartNumber: 1
✅ [Included Models]: Ar4-C6 X 2 Pieces,Al4-C6 X 2 Pieces,Br4-C6 X 2 Pieces,Bl4-C6 X 1 Piece,C4-C6 X 1 Piece,E4-C6 X 2 Pieces.
✅ [Application]: These Tools Are A Good Choice For Carbide Lathe Tool Bits, Suitable For General Lathes And Cnc Lathes..
✅ [High Precision]: These Carbide Lathe Tools With Different Angles Can Cut Any Model You Want With High Precision..
Features
- [High quality material]: Made of high quality carbide with good toughness, high hardness, strong wear resistance and durability.
- [High Precision]: These carbide lathe tools with different angles can cut any model you want with high precision.
- [Included models]: AR4-C6 X 2 pieces,AL4-C6 X 2 pieces,BR4-C6 X 2 pieces,BL4-C6 X 1 piece,C4-C6 X 1 piece,E4-C6 X 2 pieces
- [Application]: These tools are a good choice for carbide lathe tool bits, suitable for general lathes and CNC lathes.
- See more on Amazon...
Brand: SENDUO | Manufacturer: SENDUO
Dimensions: 0.78 x 2.76 x 2.16 inches
See On Amazon #7
Diraeen 35Pcs Tungsten Carbide Cutters Inserts Set,Lathe Tools for Wood Lathe Turning Tools,Supplied with Screws and Screwdriver
Asin: B0C56QRJTB | Model: 35PCS | PartNumber: 35PCS
【3 Screwdrivers And 16 Screws】 The Tungsten Cutting Tool Blade Comes With Multiple Screwdrivers And Screws. Fully Equipped And Easy To Replace.
【High-Quality After-Sales Service】If You Are Not Satisfied With The Product At Any Time Within 1 Years After Purchase, We Will Provide A Refund Or Replacement. Package Included: 4*Square (11 X 11 Mm), 4*Diamond (30 X 10 Mm), 4* Round (Diameter 12 X 2.5 Mm) , 4*Round (Diameter 8.9 X 1.85 Mm), 16* Screws, 3*Screwdriver.
【Fits For Wood Lathe Turning Tools】This Combination Carbide Insert Kit Works Perfectly With Our Wood Lathe Turning Tools Kit.Meet The Requirements Of Rough Machining And Finishing Combination.
【Solid Tungsten Steel】All Of The Carbide Lathe Tools Replacement Inserts Are Made Of Quality Solid Tungsten Steel. Super Sharp And Durable, Long Lasting And Reliable, Hard To Break Or Deform, Providing You With Nice Use Experiences For A Long Time.
Features
- Carbide Lathe Tools Replacement Tips with Screws and Screwdriver Fits For Most Size 11 mm Square with Radius, 12 mm and 8.9 mm Round, 30 x 10 mm Diamond
- Solid Tungsten Steel All of the carbide lathe tools replacement inserts are made of quality solid tungsten steel. Super sharp and durable, long lasting and reliable, hard to break or deform, providing you with nice use experiences for a long time
- 3 screwdrivers and 16 screws The tungsten cutting tool blade comes with multiple screwdrivers and screws. Fully equipped and easy to replace
- Fits for wood lathe turning tools This combination carbide insert kit works perfectly with our wood lathe turning tools kit.Meet the requirements of rough machining and finishing combination
- High-quality after-sales service If you are not satisfied with the product at any time within 1 years after purchase, we will provide a refund or replacement. Package included: 4*Square (11 x 11 mm), 4*Diamond (30 x 10 mm), 4* Round (diameter 12 x 2.5 mm) , 4*Round (diameter 8.9 x 1.85 mm), 16* Screws, 3*Screwdriver
- See more on Amazon...
Brand: Diraeen | Manufacturer: DIRAEEN
See On Amazon #8
Carbide Lathe Tools, Wood Lathe Tools with Removable Handle, Latest Upgraded Turning Tool with Adjustable Connector including Swan Neck Hollower, Rougher, Finisher(Alloy Tool Set) Black
Asin: B09WTK9N39 | Model: Feotvo03 | PartNumber: Feotvo03 | Ean: 0726189482900 | UPC: 726189482900
【Indexable Cutter Design 】Indexable Carbide Cutter Inserts Can Be Rotated Or Replaced ,Once The Edge Is Blunt, You Can Always Rotate The Cutter Head To Get A New Sharper Edge..
【0Ur Turning System Includes】 Roughing Tool*1, Finishing Tool*1, Detailer Tool*1, Gooseneck Hollower Tool*1,11-Inch Handles*2, Aluminum Alloy Handle Connector*1, 2 T15 Wrenches, All In One In Aluminum Alloy Display Box..
【Versatile And Beautiful】Utility Turning Tools For Bowl Gouge Turning Pens Pepper Mills Spindles And Lots More Woodturning Projects Of All Sizes. The Black And Blue Coating Can Pleasing While Practically Adding Friction. Great For Woodworkers, Woodturners Of All Skill Levels. Perfect Gift For Woodworkers, Engineers And Diy Enthusiasts..
【Christmas Gift Lathe Tools More Stable】 Premium Cnc Machined From 1/2 Inch Square Stainless Steel, Which Is More Stable, Stiffer And Not Easy To Roll Than Round Shaft Tools. Offers Two Alloy Handles, Adjustable Length, Convenient And Efficient.Where You Can Fill Sand Into The Bottom One To Increase Counterweight And Stability For This Expandable Tool Handle..
Features
- Upgraded High-quality Turning Tools,handle And Connector Are Removable And Adjustable High-density tungsten carbide cutting heads are made with high-speed steel blade material which will not wear off easily. 2*Aluminum alloy detachable handle and connector, can be replaced or disassembled freely, saving a lot of money(other turning tools only have 1 non-replaceable connector, damage will not work).Aluminum alloy handle is sandblasted and anodized by electroplating, better feel for processing.
- Christmas Gift Lathe Tools More Stable Premium CNC machined from 1/2 inch square stainless steel, which is more stable, stiffer and not easy to roll than round shaft tools. Offers two alloy handles, adjustable length, convenient and efficient.where you can fill sand into the bottom one to increase counterweight and stability for this expandable tool handle.
- Indexable Cutter Design Indexable carbide cutter inserts can be rotated or replaced ,once the edge is blunt, you can always rotate the cutter head to get a new sharper edge.
- Versatile And Beautiful Utility turning tools for bowl gouge turning pens pepper mills spindles and lots more woodturning projects of all sizes. The black and blue coating can pleasing while practically adding friction. Great for woodworkers, woodturners of all skill levels. Perfect gift for woodworkers, engineers and DIY enthusiasts.
- 0ur Turning System Includes Roughing tool*1, Finishing tool*1, Detailer tool*1, Gooseneck Hollower tool*1,11-inch handles*2, aluminum alloy handle connector*1, 2 T15 wrenches, all in one In aluminum alloy display box.
- See more on Amazon...
Brand: Feotvo | Manufacturer: Feotvo03
See On Amazon #9
JWGJW 120034 Mini Lathe Quick Change Tool Post,Lathe Tool Holder,Axa Tool Holder
Asin: B018QMTXB0 | Model: 120034 | PartNumber: 120034 | Ean: 0703341919863, 0798154089902 | UPC: 703341919863, 798154089902
【 Scope Of Application 】 With A Dial, Each Tool Holder Can Rotate At Multiple Angles Of 9 ° Or 9 °. With The Use Of Extended Unit Operation, Various Angle Workpieces Can Be Processed, Which Can Be Used For Cylinder, Slotting, Cutting, Knurling, Drilling, Reaming, And Other Processing. Suitable For Small Lathes And Micro Lathes Such As 7X10, 7X12, 7X14, 7X16, And 9X16 "..
Note: This Tool Is Suitable For Diy Mini Lathes, Micro Lathes, And Small Lathes..
【 Product Packaging】 1X A Dovetail Tenon, 1X 3/8" Boring Bar Holder, 1X 0.2" Capacity Cut-Off Blade Holder, 2X 1/2" Turning & Facing Holders, 2X Mounting Bolts (M8 & M10), 2X Allen Key..
【 Product Quality 】: The Quick Replacement Tool Holder Is Composed Of Anodized Aluminum Oxide And Black Steel, With A Wedge-Shaped Tool Holder Design That Is Easy To Center, And All Working Parts Are Precision Ground And Hardened. The Positioning Accuracy Of The Tool Holder Replacement Is High, And The Reset Accuracy Is Within The Range Of 0.002Mm.
Features
- Product Description : This is a mini tool holder used to fix the cutting tool, which is installed on the lathe through a dovetail tenon.
- Product Quality : The quick replacement tool holder is composed of anodized aluminum oxide and black steel, with a wedge-shaped tool holder design that is easy to center, and all working parts are precision ground and hardened. The positioning accuracy of the tool holder replacement is high, and the reset accuracy is within the range of 0.002mm
- Scope of Application With a dial, each tool holder can rotate at multiple angles of 9 or 9 . With the use of extended unit operation, various angle workpieces can be processed, which can be used for cylinder, slotting, cutting, knurling, drilling, reaming, and other processing. Suitable for small lathes and micro lathes such as 7x10, 7x12, 7x14, 7x16, and 9x16 .
- Product Packaging 1x a dovetail tenon, 1x 3/8 boring bar holder, 1x 0.2 capacity cut-off blade holder, 2x 1/2 turning & facing holders, 2x Mounting bolts (M8 & M10), 2x Allen Key.
- Note: This tool is suitable for DIY mini lathes, micro lathes, and small lathes.
- See more on Amazon...
Brand: JWGJW | Manufacturer: JINWEN
Dimensions: 0.28 x 0.79 x 0.79 inches | Weight: 1.40 Pounds
See On Amazon #10
WEN PM01 Wooden Lathe Pen-Turning MT1 Mandrel
Asin: B072FR29X7 | Model: PM01 | PartNumber: PM01 | Ean: 0044459163015 | UPC: 044459163015
1/4-Inch Diameter Shaft (7Mm) Runs Through The Center Of The Workpiece.
Includes 5 Slimline Spacer Bushings.
Designed To Fit The Wen 3420 Wood Lathe.
Turn Pens, Pencils And More.
Features
- Tapered Morse maximizes compatibility with most MT1 wood lathes
- Turn pens, pencils and more
- 1/4-inch diameter shaft (7mm) runs through the center of the workpiece
- Designed to fit the WEN 3420 wood Lathe
- Includes 5 slimline SPACER bushings
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 3.10 x 11.80 x 3.10 inches | Weight: 0.75 Pounds
See On Amazon #11
PSI Woodworking LCENT3210 Super 4-Prong Spring-Loaded Drive Center #2MT
Asin: B01MA26GPP | Model: LCENT3210 | PartNumber: LCENT3210 | Ean: 0718122015306 | UPC: 718122015306
Spring-Loaded Center Point Simplifies Positioning Of Your Spindle.
Spring-Loaded Center Point Helps Avoid Splitting Your Work Piece.
Spring-Loaded Center Point Retracts When Tailstock Pressure Is Applied.
Sharp Spurs Give A Strong Bite Into Wood Work Piece.
Features
- 1" Diameter with #2MT
- Sharp spurs give a strong bite into wood work piece
- Spring-loaded center point simplifies positioning of your spindle
- Spring-loaded center point retracts when tailstock pressure is applied
- Spring-loaded center point helps avoid splitting your work piece
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 1.00 x 4.00 x 1.00 inches | Weight: 0.45 Pounds
Warranty: 2 years with normal use
See On Amazon #12
VINWOX 8 PCS Carbide Wood Lathe Turning Tool Set, Carbide Lathe Turning Tool, Including Swan Neck Hollower, Rougher, Finisher, Detailer, Pen Turning tools, Aluminum Alloy Handles from 14" to 29"
Asin: B0CG61QPF3 | Model: wood chisel-4pcs ALU Handle | PartNumber: wood chisel-4pcs ALU Handle | Ean: 0769293700683 | UPC: 769293700683
✅The Length Of The Shank Inserted Into The Handle Is Adjustable According To Your Need On Turning Reach..
✅Simply More Turning & Long Lasting, Say Good-Bye To Sharpening Tools. Top Quality And Long Cutting Life Guaranteed..
✅Detailer With 28X10mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Final Touch On Small Beads Or Coves, Terrific On Chuck Tenons..
✅Including One Set Carbide Tip Insert Installed On Chisel..
✅Square Rougher With 11X11x2mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Removes Bulk Fast And Efficiently, Terrific On Cutting Hard Materials..
✅Round Finisher With Ø12 Mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Finishing Fast And Efficiently, Terrific Scraping Workout..
✅Swan Neck Hollower With Ø9x1.8Mm Carbide Tip And 3/4”X3/8” (19X10mm) Thick Polished Solid Swan Neck Toolbar Features With Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning On All Inside Holes! Remember 29” Extra Long Handle Is Important On Hollowing Projects..
✅Two Pieces Aluminum Alloy Handles, The Normal Rod Connected To The Carbide Toolbar, The Extended Rod Can Be Screwed Onto The Normal Rod, Flexible Tool Length From 14“ To 29”.
✅All Tool Bars, From 3/4”X3/8” Swan Neck Toolbar To 3/8”X3/8” Regular Rougher/Finisher/Detailer Toolbars Are Fully Polished For Most Smooth Sliding On Tool Rest For Each Workpiece..
Features
- The VINWOX Carbide Turning Tools are Designed with Ease of Use in Mind. It is Ideal for Wood Turners of All Skill Levels and Helps Ensure Success Right From the Start. The VINWOX Carbide Turning Tools Eliminate the Need for Sharpening of Your Turning Tools Since It Features a Rotatable Cutter Head.
- All Tool Bars, from 3/4 x3/8 Swan Neck Toolbar to 3/8 x3/8 Regular Rougher/Finisher/Detailer Toolbars are Fully Polished for Most Smooth Sliding on Tool Rest for Each Workpiece.
- The Length of the Shank Inserted into the Handle is Adjustable According to Your Need on Turning Reach.
- SWAN NECK HOLLOWER with 9x1.8mm Carbide Tip and 3/4 x3/8 (19x10mm) Thick Polished Solid Swan Neck Toolbar Features with Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning on All Inside Holes! Remember 29 Extra Long Handle is Important on Hollowing Projects.
- SQUARE ROUGHER with 11x11x2mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Removes Bulk Fast and Efficiently, Terrific on Cutting Hard Materials.
- ROUND FINISHER with 12 MM Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Finishing Fast and Efficiently, Terrific Scraping Workout.
- DETAILER with 28x10mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Final Touch on Small Beads or Coves, Terrific on Chuck Tenons.
- Including One Set Carbide Tip Insert Installed on Chisel.
- Two Pieces Aluminum Alloy Handles, the Normal Rod Connected to the Carbide Toolbar, the Extended Rod Can Be Screwed onto the Normal Rod, Flexible Tool Length from 14 to 29
- Simply More Turning & Long Lasting, SAY Good-bye to Sharpening tools. Top quality and Long cutting life Guaranteed.
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #13
Edge Technology Tailstock Alignment Bar
Asin: B01MFCAY27 | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0030955068411 | UPC: 030955068411
Overall Length Is 12.250" / Diameter Is 1".
*** Please Scroll Down For More Details. ***.
Bar Made From High Strength Aluminum With Durable Anodized Finish..
Features
- Hardened steel bar ends are precision ground after assembly for superior accuracy. Bar end diameters are equal within 0.0002".
- Bar made from high strength aluminum with durable anodized finish.
- Overall length is 12.250 / Diameter is 1
- *** PLEASE SCROLL DOWN FOR MORE DETAILS. ***
- See more on Amazon...
Brand: Edge Technology | Manufacturer: Edge Technology
Weight: 1.65 pounds
See On Amazon #14
BACHIN Mini Lathe Beads Polisher Machine Diy Machining for Table Woodworking Wood DIY Tool Lathe Standard Set
Asin: B07HKZPDDD | Model: Wood Lathe | PartNumber: Wood Lathe | Ean: 0735314502161 | UPC: 735314502161
Maximum Turning Diameter: 70Mm. Maximum Clamping Length: 180Mm. Chuck Clamping Range: 0.6-6Mm.
Thick Aluminum Base, Acrylic Dust Cover Motor. Transparent Plexiglass Shield, Super Convection Cooling Holes..
High-Precision, Stability, Low Noise, Aluminum Alloy Materials, Cnc Machining..
Power: 100W Voltage: 24V Dc Material: Aluminum Alloy And Acrylic Speed: 5000-8000 R / Min, 7 Grade Speed Size: 310* 60 * 70Mm 3X Hex Shanks(0.059Inch,0.079Inch,0.098Inch).
Features
- Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use.
- Power: 100W Voltage: 24V DC Material: aluminum alloy and Acrylic Speed: 5000-8000 r / min, 7 grade speed Size: 310* 60 * 70mm 3x Hex shanks(0.059inch,0.079inch,0.098inch)
- Maximum turning diameter: 70mm. Maximum clamping length: 180mm. Chuck clamping range: 0.6-6mm
- High-precision, stability, low noise, aluminum alloy materials, CNC machining.
- Thick aluminum base, acrylic dust cover motor. Transparent plexiglass shield, super convection cooling holes.
- See more on Amazon...
Brand: BACHIN | Manufacturer: Bachin
Dimensions: 1.97 x 11.42 x 236.00 inches
See On Amazon #15
YUFUTOL Carbide Woodturning Tool Mini Size (3 Piece Set) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles Perfect For Turning Pens or Small to Mid-Size Turning Project
Asin: B07TPS9YL2 | Model: ZY-GHM-0902-2-214 | PartNumber: ZY-GHM-0902-2-214 | Ean: 0797646127207 | UPC: 797646127207
Set Includes 2Pcs Round 12Mm Carbide Cutters, 2Pcs Square 11Mm Carbide Cutters And 2Pcs Diamond With Radius Cutters..
Designed To Be Kept Flat On The Tool Rest And Level To The Floor, The Yufutol Finisher/Rougher/Detailer Will Effortlessly Hog Away Massive Amounts Of Material For Any Woodturning Process Without The Need For Sharpening，For Wood Hobbyist Or Diy Or Carpenter.
Easy To Use:Greatly Simplified Learning Curving When Turning,No Complicated Angles To Learn And Remember,For All Skill Levels Woodworking Enthusiast Or Diy.
Dimension：Length Of Tool Bar 4.72"(120Mm) ，Length Of Wood Handle：7.87"（200Mm），Overall Length 12.6"(320Mm).
Features
- Combo Set Include: 3 Pieces Wood Turning Tools(Mini Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key
- Dimension Length of Tool Bar 4.72(120mm) Length of wood handle 7.87 200mm Overall length 12.6(320mm)
- Set includes 2pcs Round 12mm carbide cutters, 2pcs Square 11mm carbide cutters and 2pcs Diamond with radius cutters.
- Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY
- Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening for wood hobbyist or DIY or carpenter
- See more on Amazon...
Brand: YUFUTOL | Manufacturer: LA HARDWARE INC
Dimensions: 0.04 x 15.00 x 2.50 inches | Weight: 0.01 pounds
See On Amazon #16
Zouzmin 3/8 1/2" SRACR1010/1212 H06 Lathe Turning Holders Lathe Turning & Profiling Tool Holder with RCMT0602 Round Carbide Milling Inserts For steel stainless steel (2pcs 1/2 holders+ 10pcs inserts)
Asin: B0CN4HFWW3 | Ean: 0720118400072 | UPC: 720118400072
Suitable For Finishing And Semi-Finishing Of Various Steel, Stainless Iron And Cast Iron Workpieces;.
Package Includes: 1Piece Right Hand Holder + 1Piece Left Hand Holder+5Pcs Yellow Round Inserts +5Pcs Gray Round Inserts +2Pcs T8 Wremches.
Features: Offer Long Tool Life And Faster Cutting Speed, Low Friction Coefficient, Good Wear Resistance.Perform Good Even In Very Dirty Environment.
About The Round Milling Inserts--Carbide And Tin Coated, Insert Dia:6Mm=0.236In, Insert Thinckness:2.3Mm=0.09In,The Yelow Inserts Suitable For Processing Steel, And The Gray Inserts For Stainless Steel;.
Features
- About the milling tool holders --- 40Cr material with forging process , strong and durable, 3/8 " shank diameter SRACR1010H06 and 1/2" SRACR1212H06 , overallength:100mm = 3.9in , Cuttinng angle:90 degs, Screw:M2.5*6, wrench:T8;
- About the round milling inserts--Carbide and Tin coated, insert dia:6mm=0.236in, insert thinckness:2.3mm=0.09in,the yelow inserts suitable for processing steel, and the gray inserts for stainless steel;
- Suitable for finishing and semi-finishing of various steel, stainless iron and cast iron workpieces;
- Features: Offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.Perform good even in very dirty environment
- Package includes: 1piece right hand holder + 1piece left hand holder+5pcs yellow round inserts +5pcs gray round inserts +2pcs T8 wremches
- See more on Amazon...
Brand: zouzmin | Manufacturer: zouzmin
Dimensions: 1.20 x 5.00 x 3.00 inches
See On Amazon #17
PSI Woodworking PKMS2SET Pen Mandrel Saver Package, 2 Morse Taper (2MT)
Asin: B01NAD5TZE | Model: PKMS2SET | PartNumber: PKMS2SET | Ean: 0743031896661 | UPC: 743031896661
System Adapts To The Length Of Your Project..
Great For Turners Of All Skill Levels..
No Need For The Knurled Nut That Sometimes Gets Lost, Misplaced, Or Stripped..
Perfect System To Avoid Bent Mandrel Shafts And Ruining The Point On Your Live Center..
Features
- Includes 7mm drill bit, (5) 7mm bushings, #2MT mandrel saver tailstock center, & #2MT basic mandrel.
- Perfect system to avoid bent mandrel shafts and ruining the point on your live center.
- System adapts to the length of your project.
- No need for the knurled nut that sometimes gets lost, misplaced, or stripped.
- Great for turners of all Skill levels.
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 1.50 x 12.20 x 1.50 inches | Weight: 0.85 Pounds
Warranty: 2 years under normal use
See On Amazon #18
Carbide Tipped Wood Turning Tools Set, CRAFTFORCE Wood Lathe Tools with 2 Removable Handles and a Adjustable Connector,Carbide Lathe Tools for Woodturning Including Swan Neck Hollower,Rougher,Finisher
Asin: B0C61S54DK | Model: TR050 | PartNumber: TR050
【Premium Workmanship】Premium Aluminum Alloy And Anodized Finish Make The Handles Stronger Wear Resistance; Cnc Machined From High Quality Square Stainless Steel Arbor Which Is More Shock-Resistant And Stable Make You Get A Good Cutting Effect In Safe Operation; Tungsten Carbide Cutter Inserts Are Not Easy To Wear Out Because Of High Resistance To Deformation And Flexure..
【Easy To Use】Our Woodworking Lathe Tool Set Greatly Simplified Learning Curving When Turning Which Is Easy To Use, Great For Woodworkers Of All Skill Levels Or Diy Enthusiasts, And You'll Get Great Results With Our Carbide Turning Tools..
【Wood Turning Tools Set In A Delicate & Protable Case】Our Carbide Tipped Wood Lathe Turning Tools Set Comes With Detachable Handle*2, Aluminum Alloy Handle Connector*1, Roughing Tool*1, Finishing Tool*1, Detailer Tool*1, Gooseneck Hollower Tool*1, Allen Wrench*1, T15 Wrench*1, Extra Carbide Cutter Insert & Screw*4, Extra Handle Screw*4, All In One In Aluminum Alloy Display Box..
【Length Adjustable & Cutter Indexable】Adjustable And Extendable Turning Tool Support Freely Adjust The Length According To Your Preference. Upgrade Indexable Carbide Cutter Inserts Can Be Rotated Or Replaced Once The Edge Becomes Dull, You Can Always Rotate The Cutter Head To Get A New Sharper Edge..
Features
- Upgraded High-quality Turning Tools 2 * Aluminum alloy detachable handle and 1 * connector can improve efficiency than other turning tools only have a handle and an extension rod. Ergonomic grip of the handle for comfort and stability. Non-slip rubber cover of the handle add friction for better control & reduce vibration on hand. Extra carbide cutter insert & screw*4 and extra handle screw*4 solve the problems of lost screws and dull blades.
- Length Adjustable & Cutter Indexable Adjustable and extendable turning tool support freely adjust the length according to your preference. Upgrade indexable carbide cutter inserts can be rotated or replaced once the edge becomes dull, you can always rotate the cutter head to get a new sharper edge.
- Premium Workmanship Premium aluminum alloy and anodized finish make the handles stronger wear resistance; CNC machined from high quality square stainless steel arbor which is more shock-resistant and stable make you get a good cutting effect in safe operation; Tungsten carbide cutter inserts are not easy to wear out because of high resistance to deformation and flexure.
- Wood Turning Tools Set in a Delicate & Protable Case Our carbide tipped wood lathe turning tools set comes with detachable handle*2, aluminum alloy handle connector*1, roughing tool*1, finishing tool*1, detailer tool*1, gooseneck hollower tool*1, allen wrench*1, T15 wrench*1, extra carbide cutter insert & screw*4, extra handle screw*4, all in one in aluminum alloy display box.
- Easy to Use Our woodworking lathe tool set greatly simplified learning curving when turning which is easy to use, great for woodworkers of all skill levels or DIY enthusiasts, and you'll get great results with our carbide turning tools.
- See more on Amazon...
Brand: CRAFTFORCE | Manufacturer: CRAFTFORCE
See On Amazon #19
Carbide Tipped Wood Turning Tools Set, Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts
Asin: B08MBRPX3Z | Model: mugongju001 | PartNumber: mugongju001 | Ean: 0799117405289 | UPC: 799117405289
Indexable Cutter Design – Indexable Carbide Cutter Inserts Can Be Rotated Or Replaced To Provide A Fresh Cutting Edge Whenever Needed, ( Click The "Aogbra Store" To Order Replace Carbide Cutter Inserts When You Need ).
Tool Details – Tool Shafts Are Cnc Machined From Square High Carbon Steel, Making Them Strong And Solid In The Hand. The Square Shaft Profile Helps Keep The Tool Flat On The Tool Rest And Level With The Floor, Making Them Less Likely Than Round Shaft Tools To Roll And Shift While On The Tool Rest..
Easy To Use – The Variable Length Shaft Design And Carbide Cutters Are Valuable To All Skill Levels Of Woodworkers. Carbide Cutters Allow Both Beginner And Experienced Turners To Quickly Start Projects By Reducing The Learning Curve Associated With Traditional Turning Tools..
Material - Tools Are Made With Tungsten Carbide Tips For Extended Cutter Life, Stainless Steel Arbor For Strength And Durability, And Aluminum Oxide Alloy Handles For Grip, Comfort, And Durability..
Features
- OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert.
- MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability.
- INDEXABLE CUTTER DESIGN Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the Aogbra Store to order replace carbide cutter inserts when you need )
- EASY TO USE The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools.
- TOOL DETAILS Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest.
- See more on Amazon...
Brand: Aogbra | Manufacturer: Aogbra
See On Amazon #20
1/2" 5/8" Boring Bar SNR0013M16+SER1616H16 Lathe Internal Threading Inserts Turning Tool Holder with 5pcs 16ER AG60+5pcs 16IR AG60 Carbide Turning Inserts
Asin: B08221Z17Y | Model: YO | PartNumber: YO | Ean: 0791319312945 | UPC: 791319312945
3. Package: 1Pc Snr0013m16+1Pc Ser1616h16 +5Pcs 16Er Ag60+5Pcs 16Ir Ag60+2Pcs Wrenchs.
5. If You Need More 16Er Ag60 ,Please Search 【Asin：B07rb5bkg7】,16Ir Ag60【Asin：B07s1wsnj6】.
4. Black Oxided Smooth Finish On Each Turning Tool Holder Style And Shank Size. Blades Exquisite Workmanship, High Strength, High Toughness, Stable And Durable..
2. Direction: Right Shank Dia: 13Mm=0.51"=1/2"; 16Mm=0.63"=5/8"; Over Length: M:150Mm/5.90"(Boring Bar); H:100Mm/3.94"(Threading Holder).
Features
- 1. Material: Steel(Turning Holder)+Carbide(Carbide inserts); Color: Black(Boring Bar)+Golden (Threading Insert)
- 2. Direction: Right Shank Dia: 13mm=0.51=1/2; 16mm=0.63=5/8; Over Length: M:150mm/5.90(Boring Bar); H:100mm/3.94(Threading Holder)
- 3. Package: 1pc SNR0013M16+1pc SER1616H16 +5pcs 16ER AG60+5pcs 16IR AG60+2pcs wrenchs
- 4. Black oxided smooth finish on each turning tool holder style and shank size. Blades exquisite workmanship, high strength, high toughness, stable and durable.
- 5. If you need more 16ER AG60 ,please search ASIN B07RB5BKG7 ,16IR AG60 ASIN B07S1WSNJ6
- See more on Amazon...
Brand: YOYO TOOLS | Manufacturer: YO
See On Amazon
Looking For Something Else?
Search