Cuwiny Pilot Arc Plasma Cutter torch,AG60 Plasma Cutting Gun Suitable for 40A 50A 60A High Frequency Air Plasma Cutting Machine.Fit CUT50DP CUT40DP CUT60DP AG60P
Asin: B09YQ6VYRP | Model: Cuwiny AG60 torch | PartNumber: Cuwiny AG60 torch | Ean: 0692041111182 | UPC: 692041111182
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Package Contains A Set Of Consumables ( 1 Nozzles, 1 Electrodes, 1 Guide, 1 Cup) Already Installed On The Cutting Gun, Cutting Gun, Cable, Installation Tool, Interface Protection Sleeve.C.
We Offer High Quality Ag60 Cutter Torch, If You Have Any Questions About This Product, Please Feel Free To Contact Us..
The Cable Uses 6 Square Copper Wire, Rated Working Current 60A, 60% Duty Cycle, Can Be Used For A Long Time In The Cutter Below 60A, Including 40A, 50A, 60A Cutter. The Maximum Support In 80A Short Time Work..
Suitable For Most Pilot Arc Plasma Cutting Machine,The Torch With M16*1.5 Screw Air Interface,2 Pins Connector,Leading Arcs..
Features
- High quality Pilot Arc Plasma Cutter torch with 4m (13ft) cable, outermost canvas wrapped.
- Suitable for most Pilot Arc Plasma Cutting Machine,The torch with M16*1.5 screw air Interface,2 Pins connector,Leading arcs.
- The package contains a set of consumables ( 1 Nozzles, 1 Electrodes, 1 Guide, 1 Cup) already installed on the cutting gun, cutting gun, cable, installation tool, interface protection sleeve.c
- The cable uses 6 square copper wire, rated working current 60A, 60% Duty Cycle, can be used for a long time in the cutter below 60A, including 40A, 50A, 60A cutter. The maximum support in 80A short time work.
- We offer high quality AG60 Cutter torch, if you have any questions about this product, please feel free to contact us.
- See more on Amazon...
Brand: Cuwiny | Manufacturer: Cuwiny
See On Amazon Similar To Cuwiny Pilot Arc Plasma Cutter
#1
YESWELDER Plasma Cutting Machine 65Amp Non-High Frequency Non-Touch Arc Digital Screen Display DC Inverter 110/220V Dual Voltage Blowback Plasma Cutting Machine CUT-65DS
Asin: B09L3Y3ZLF
[Powerful Cleaning Cutting] Cut-65Ds Adopts The International Leading Mcu Intelligent Digital Control Technology, All The Main Components Are Realized By Software. Ideal Clean Cut: 5/16"@110V, 5/8"@220V Maximum Cut: 1/2"@110V, 63/64"@220V..
[Air Filter Regulator] There Is An Air Pressure Sensor Inside The Machine, Users Can Adjust The Air Pressure By The Regulator. The Air Filter Is Mounted At The Rear Of The Machine, Which Allows For Quick Connection And Saves Installation Time And Improves Efficiency..
[Non-Touch Pilot Arc] The Pilot Arc Ipt40 Torch Has Better Cutting Performance, Which Efficiently Cuts Through Rough, Painted, And Rusty Surfaces, While Producing Minimal Slag..
[Pt/2T/4T Function]: Post Time Function, Adjustable From 5-20 Seconds. Adjust The Cooling Time Of The Welding Head To Extend The Life Of Consumables. Generally, We Recommend A Cooling Time Of 5-8 Seconds. 2T/4T Auto Cut Releases Your Fingers. 2T Is A Semi-Automatic Cutting Control, 4T Is An Automatic Cutting Control..
[Digital Screen Display]: The Screen Centrally Displays Parameters Such As Air Pressure, Voltage, Current, Etc., Allowing Users To Understand The Status Of The Equipment In Real Time, Adjusting The Operation In A Timely Manner, And Improving The Efficiency Of The Operation. If The Plasma Cutting Machine Can Not Work, There Will Be An Error Code System On The Screen, It Is Easy To Find The Problem..
Features
- [NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
- [Digital Screen Display]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.
- [Powerful Cleaning Cutting] CUT-65DS adopts the international leading MCU intelligent digital control technology, all the main components are realized by software. Ideal Clean Cut: 5/16@110V, 5/8@220V Maximum Cut: 1/2@110V, 63/64@220V.
- [PT/2T/4T Function]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.
- [AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.
- [NON-TOUCH PILOT ARC] The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.
- See more on Amazon...
Brand: YESWELDER | Manufacturer: YESWELDER
Dimensions: 11.81 x 15.75 x 5.91 inches
See On Amazon #2
YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Screen Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Cutting Machine CUT-55DS Pro
Asin: B0CQZXGMJS
[Clean Cut] Cut-55Ds Pro Adopts The International Leading Mcu Intelligent Digital Control Technology, All The Main Components Are Realized By Software.Clean Cut: 1/3''@110V 1/2''@220V // Max Cut: 1/2''@110V 4/5''@220V..
[Air Filter Regulator] There Is An Air Pressure Sensor Inside The Machine, Users Can Adjust The Air Pressure By The Regulator. The Air Filter Is Mounted At The Rear Of The Machine, Which Allows For Quick Connection And Saves Installation Time And Improves Efficiency..
[Non-Touch Pilot Arc] The Pilot Arc Ipt40 Torch Has Better Cutting Performance, Which Efficiently Cuts Through Rough, Painted, And Rusty Surfaces, While Producing Minimal Slag..
[Pt/2T/4T Function]: Post Time Function, Adjustable From 5-20 Seconds. Adjust The Cooling Time Of The Welding Head To Extend The Life Of Consumables. Generally, We Recommend A Cooling Time Of 5-8 Seconds. 2T/4T Auto Cut Releases Your Fingers. 2T Is A Semi-Automatic Cutting Control, 4T Is An Automatic Cutting Control..
[Digital Display]: The Screen Centrally Displays Parameters Such As Air Pressure, Voltage, Current, Etc., Allowing Users To Understand The Status Of The Equipment In Real Time, Adjusting The Operation In A Timely Manner, And Improving The Efficiency Of The Operation. If The Plasma Cutting Machine Can Not Work, There Will Be An Error Code System On The Screen, It Is Easy To Find The Problem..
Features
- [NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
- [DIGITAL DISPLAY]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.
- [CLEAN CUT] CUT-55DS PRO adopts the international leading MCU intelligent digital control technology, all the main components are realized by software.CLEAN CUT: 1/3''@110V 1/2''@220V // MAX CUT: 1/2''@110V 4/5''@220V.
- [PT/2T/4T FUNCTION]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.
- [AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.
- [NON-TOUCH PILOT ARC] The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.
- See more on Amazon...
Brand: YESWELDER | Manufacturer: YESWELDER
See On Amazon #3
ARCCAPTAIN 60PCS PT31 Plasma Cutting Consumables Fit CUT-40 CUT-50 CT-312 with Plasma Cutter Torch PT-31 JG-40 LG-40
Asin: B0C2C54FZC | Model: PT31-60pcs | PartNumber: PT31-60pcs
Wide Compatibility: These Plasma Torches Consumables Suitable Works With Plasma Cutting Machines Such As Cut35, Cut-40, Cut-40D, Lgk-40, Ct312, Ct312d, Ct416, Ct416d, Ct518, Ct518d, Ct520d, Super160, Super160p Etc..
Ensure Cutting Quality: Timely Replacement Of Accessories Will Help You Maintain The Plasma Cutter Machine Performance And Guarantee High-Quality Cutting Results..
Premium Material: Our Plasma Cutter Accessories Are Meticulously Crafted From High-Quality Metal And Ceramics, Ensuring Unmatched Durability And Reliability, Offer A Longer Lifespan..
Fit More Options: These Plasma Cutting Consumables Perfectly Fit Pt-31, Jg-40 And Lg40 Plasma Cutting Torch..
Features
- Package Include: 5 Shield Cups, 30 Nozzles, 10 Swirl Baffle, and 15 Electrodes.
- Fit More Options: These plasma cutting consumables perfectly fit PT-31, JG-40 and LG40 plasma cutting torch.
- Wide Compatibility: These plasma torches consumables suitable works with plasma cutting machines such as CUT35, CUT-40, CUT-40D, LGK-40, CT312, CT312D, CT416, CT416D, CT518, CT518D, CT520D, Super160, Super160P etc.
- Premium Material: Our plasma cutter accessories are meticulously crafted from high-quality metal and ceramics, ensuring unmatched durability and reliability, offer a longer lifespan.
- Ensure Cutting Quality: Timely replacement of accessories will help you maintain the plasma cutter machine performance and guarantee high-quality cutting results.
- See more on Amazon...
Brand: ARCCAPTAIN | Manufacturer: ARCCAPTAIN
See On Amazon #4
RIVERWELD P-80 Plasma Cutter Roller Guide Wheel Spacer circle compass stand off One Screw Positioning Fit Pilot Arc Starting
Asin: B011GGWY1Y | Model: P-80 | PartNumber: P-80 | Ean: 0707242428585 | UPC: 707242428585
Fit Pilot Arc Starting.
Max Cutting Thickness: 40Mm.
Inner Diametre : 33Mm.
Roller Guide Wheel Spacer.
Features
- Important Due to the different sizes of plasma cutters, this cutter will not fit all plasma cutters. But all kinds of P80 P-80 Style Panasonic Plasma Cutter torch.
- Roller Guide Wheel Spacer
- Fit Pilot Arc Starting
- inner diametre : 33mm
- Max Cutting thickness: 40MM
- See more on Amazon...
Brand: RIVERWELD | Manufacturer: RIVERWELDstore
Dimensions: 0.59 x 2.36 x 1.97 inches | Weight: 0.18 pounds
See On Amazon #5
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved
Asin: B083GPXF8Y | Model: CUT-55DS | PartNumber: CUT-55DS
[Powerful Cutting Ability] 20-55 Output, Ideal Clean Cut: 3/10''@110V,1/2''@220V, Max Cut: 3/5''@110V,4/5''@220V. Uses Non-Hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Aluminum..
[Added Safety] Certificated By Etl, Automatic Compensation For Voltage Fluctuation, Over Current Protection, Over Load Protection, Temperature Control. Note:Due To The Inner Structure, The Pressure Gauge May Only Read About 30Psi, Which Is The Normal Phenomenom And It Do Not Affect The Whole Operation..
[Lightweight And Portable] Allows For Connection To 110 Or 220 Volt Receptacles Without Tools, Portable In The Shop Or At The Job Site—At 11.55Lb, The Shoulder Strap Allows The End User To Easily Move From Location To Location..
[Built-In Post Flow] When You Stop Cutting, The Air Runs On For A Minute To Cool The Consumable Of The Plasma Cutter Torch. This Will Extend Consumable Life..
Features
- [NON-TOUCH PILOT ARC] Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- [BUILT-IN POST FLOW] When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
- [POWERFUL CUTTING ABILITY] 20-55 output, ideal clean cut: 3/10''@110V,1/2''@220V, max cut: 3/5''@110V,4/5''@220V. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- [LIGHTWEIGHT AND PORTABLE] Allows for connection to 110 or 220 volt receptacles without tools, Portable in the shop or at the job site at 11.55lb, the shoulder strap allows the end user to easily move from location to location.
- [ADDED SAFETY] Certificated by ETL, Automatic compensation for voltage fluctuation, over current protection, over load protection, temperature control. Note:Due to the inner structure, the pressure gauge may only read about 30psi, which is the normal phenomenom and it do not affect the whole operation.
- See more on Amazon...
Brand: YESWELDER | Manufacturer: SHENZHEN HAIBAO PLASMA EQUIPMENT CO.,LTD
See On Amazon #6
TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut
Asin: B08FYCYJHQ | Model: TL-50C | PartNumber: TL-50C | Ean: 0630128776626 | UPC: 630128776626
Multi-Applications: Suitable For Cutting Stainless Steel, Alloy Steel, Low Carbon Steel, Copper And Other Metal Materials..
Portable: Auto-Voltage Adapts To 110 V - 220 V Input Power With Adapter. Lightweight 13Lb, Can Be Carry And Storage Anywhere You Need..
Safety Protection: Certificated By Etl, Built In Over Current Protection, Over Load Protection, Temperature Control..
Powerful Cutting Effect: Up To 50A Output, 60% Duty Cycle, Maximum 1/2" Clean Cut..
Features
- Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life.
- Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2 clean cut.
- Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
- Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
- Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.
- See more on Amazon...
Brand: TOOLIOM | Manufacturer: TOOLIOM
See On Amazon #7
Plasma Cutter, 50A Pilot Arc 120/240V Dual Voltage Plasma Cutting Machine with Accessories
Asin: B08L889WBF | Model: CUT50 | PartNumber: CUT50 | Ean: 0784126416524 | UPC: 784126416524
𝐒𝐞𝐧𝐬𝐨𝐫 𝐨𝐟 𝐀𝐢𝐫 𝐏𝐫𝐞𝐬𝐬𝐮𝐫𝐞 & 𝐀𝐢𝐫 𝐂𝐨𝐦𝐩𝐫𝐞𝐬𝐬𝐨𝐫:Inside Of Machine Have Sensor Of Air Pressure, User Can Adjust The Air Pressure Through The Regulator,Users Can Use It After Connecting To The Air Compressor..
𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power Supply, Plasma Cutting Torch, Ground Clamp, Pre-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc..
𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently Cuts Through Rough, Painted, And Rusty Surfaces And Produces Minimal Slag. Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal. Newly Designed Upgraded Torch And Consumables Ensure More Precise Cutting And Durability Of Consumable Life..
Features
- & : 1/2 Ideal Clean Cut And 3/4 Maximum Severance Cut Under 220/240V,1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. SUITABLE CUTTING For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc.
- - : Efficiently Cuts Through Rough, Painted, And Rusty Surfaces And Produces Minimal Slag. Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal. Newly Designed Upgraded Torch And Consumables Ensure More Precise Cutting And Durability of Consumable Life.
- & :Inside of Machine Have Sensor of Air Pressure, User Can Adjust The Air Pressure Through The Regulator,Users Can Use It After Connecting To The Air Compressor.
- : Power Supply, Plasma Cutting Torch, Ground Clamp, Pre-Installed NPT 1/4 Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.
- See more on Amazon...
Brand: S7 | Manufacturer: win-win
Dimensions: 10.00 x 16.00 x 6.00 inches | Weight: 22.20 pounds
See On Amazon #8
YESWELDER 60 Pcs Plasma Cutting Consumables Fit Cut40 50 with Plasma Cutter Torch PT31 LG40
Asin: B08KT87DVB | Model: PT31-40PCS | PartNumber: PT31-40PCS
Application ▶These Consumables Can Work With Esab/L-Tec Pt-31, Jg-40 And Wsd-Lg40 Cutting Torch, These Torches For Plasma Cutting Machines Such As Cut-40, Cut-40D,Lgk-40, Ct312, Ct312d,Ct416,Ct416d,Ct518, Ct518d, Super160, Super160p Etc.*For 40 And 50 Amps Cutting Machine.
Our Promise ▶We Strive To Provide You With The Highest Quality Product And The Best Customer Experience, If You're Not Entirely Satisfied, Please Just Feel Free To Contact Us At Any Time.
Character ▶Plasma Electrode Tips Nozzle Extended Shroud Shield Cup Kit,Plasma Tip Nozzle Electrode Extended Cutting Consumable.
High Grade Material ▶100% Brand New And High Quality.
Features
- PACKAGE INCLUDED 5 Pcs Cup-15 Pcs Electrodes-10 Pcs Ring-30 Pcs Tip(Standard)
- HIGH GRADE MATERIAL 100% brand new and high quality
- APPLICATION These consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch, these torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312, CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc.*For 40 and 50 Amps Cutting Machine
- CHARACTER Plasma electrode tips nozzle extended shroud shield cup kit,plasma tip nozzle electrode extended cutting consumable
- OUR PROMISE We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time
- See more on Amazon...
Brand: YESWELDER | Manufacturer: YESWELDER
See On Amazon #9
PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty
Asin: B07BYJPGB1
Blow-Back Start Technology, Pilot Arc.
Continuous Pilot Arc Enables You To Cut Expanded, Rusted, Painted Metals.
60% Duty Cycle At 60Amps, 110/220 With Adapter.
Pt60 Blowback Cutting Torch With Euro Central Connection.
Features
- CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
- PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
- Blow-back start technology, Pilot Arc
- 60% duty cycle at 60amps, 110/220 with adapter
- Continuous Pilot Arc enables you to cut expanded, rusted, painted metals
- See more on Amazon...
Brand: PRIMEWELD | Manufacturer: PRIMEWELD
Dimensions: 19.00 x 20.00 x 11.00 inches
See On Amazon #10
GZ GUOZHI Plasma Cutter, 65Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, LCD Display IGBT Inverter Cutting Machine, 3/5" Clean Cut,with 2T/4T/TEST
Asin: B0BFL169LY
【Safety Guarantee】: This Cutter Is With Over-Heating And Over-Current Protection Functions, With Excellent And Reliable Quality, Use More Safety. 2T/4T/Test Function, Easy To Operation..
【Quality Accessories】: All Accessories Are Made Of High-Quality Materials. Package Included: Cut-65Hf 65-Amp Plasma Cutting Machine, Ag60 13-Feet Plasma Torch Gun, 500 Amp Work Clamp With 10 Feet Cable, 220V To 110V Transfer Power Adapter, 0.3"Nozzle, 0.4"Nozzle,Electrodes*2, Ceramic Cups*2 And User Manual..
【Set Up Within 1 Minute】: Mnpt 1/4 Inch Industrial D-Type Coupler, Can Easily And Quickly Connect To The Air Compressor, The Users Do Not Need To Install The Air Pressure Regulator. The Whole Machine Can Be Setup Quickly Within 1 Min..
【Advanced Technology 】: 20A-65A Current Adjustment, 90V-260V Wide-Voltage Design, Unafraid Of The Voltage Fluctuations, 110V/220V Dual-Voltage Automatic Conversion. High Cutting Speed, Smooth Cutting Section And No Polish Demands.Maximum Cutting Thickness Is 1", Ideal Clean Cutting Thickness Is 3/5". It Can Cut Normally At Minus 20 Degree..
Features
- Non-Touch Pilot Arc Plasma Cutter : GUOZHI 65 HF Plasma Cutter has high frequency non-touch pilot arc cutting processes, with high success rate of Arc starting and ideal cutting effect.
- Advanced Technology : 20A-65A current adjustment, 90V-260V wide-voltage design, unafraid of the voltage fluctuations, 110V/220V dual-voltage automatic conversion. High cutting speed, smooth cutting section and no polish demands.Maximum Cutting Thickness is 1, ideal clean cutting thickness is 3/5. It can cut normally at minus 20 degree.
- Safety Guarantee : This Cutter is with over-heating and over-current protection functions, with excellent and reliable quality, use more safety. 2T/4T/TEST function, easy to operation.
- Set Up within 1 Minute : MNPT 1/4 inch industrial D-type coupler, can easily and quickly connect to the air compressor, the users do not need to install the air pressure regulator. The whole machine can be setup quickly within 1 min.
- Quality Accessories : All accessories are made of high-quality materials. Package Included: CUT-65HF 65-Amp Plasma Cutting Machine, AG60 13-feet Plasma Torch Gun, 500 Amp Work Clamp with 10 Feet Cable, 220V to 110V Transfer Power Adapter, 0.3Nozzle, 0.4Nozzle,Electrodes*2, Ceramic Cups*2 and User Manual.
- See more on Amazon...
Brand: GZ GUOZHI | Manufacturer: GZ GUOZHI
See On Amazon #11
Lotos LTP8000 80 A Plasma Cutter with Pilot ARC Metal Cutter, 1 inch Clean Cut, Brown
Asin: B07BHBPX38 | Model: LTP8000 | PartNumber: LTP8000 | Ean: 0856117006257 | UPC: 856117006257
★ Buy With Confidence: We Offer 30 Days Refund And A 3-Years Limited Warranty: Include 1 Year New Replacement Warranty. ★ Us Based Customer Care & Support Team: Please Feel Free To Contact Us By Phone Or Email, We Always Stand Back On Our Products. Please Submit The Registration Form On Our Website..
★ Package Includes: 80Amp Power Supply, Plasma Cutting Torch, Ground Clamp, Pre-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc..
★ Setup Within 1 Min: The Pre-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator Allows You To Quick Connect To Your Air Compressor By Using The Stand Coupler Existing On Your Air Compressor. The Whole Machine Can Be Setup Quickly Within 1 Min..
★Non-Touch Pilot Arc: Pilot Arc Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag. ★ 2T/4T Enabled: Release Your Finger For Long Time Cut★ The Compatible Consumables Sets For This Brown Color Ltp8000d Plasma Cutter Are: Bcon40 And Bcon90. Please Search "Lotos Bcon40" Or "Bcon90".
Features
- CUT THICKNESS: Ideal Cut: 1" Inch; Maximum: 1 1/2" Inch. OUPUT: Current 20~80A Duty Cycle @ 40C (104F) 60% @80A & 100% @50A. SUITABLE: For stainless steel, alloy steel, mild steel, copper and aluminum. INPUT: Voltages 210~250V, 1PH, 50/60Hz; Current 200~220V, 1PH, 50A. Recommend Circuit Breaker Size: 60AMP.
- NON-TOUCH PILOT ARC: Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. 2T/4T ENABLED: Release your finger for long time cut THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP8000D Plasma Cutter are: BCON40 and BCON90. Please search Lotos BCON40 or BCON90
- BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
- SETUP WITHIN 1 MIN: The pre-installed NPT 1/4 industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
- PACKAGE INCLUDES: 80AMP Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4 industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
- See more on Amazon...
First Available: 03/15/2018
Brand: LOTOS | Manufacturer: Lotos Technology
Weight: 38.00 pounds
See On Amazon #12
Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown
Asin: B07Y3Y12VF | Model: LTP5500DCNC | PartNumber: LTP5500DCNC | Ean: 0856117006455 | UPC: 856117006455
★ Setup Within 1 Min--The Per-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator Allows You To Quick Connect To Your Air Compressor By Using The Stand Coupler Existing On Your Air Compressor. The Non-Hf Start 14Ft Torch With Central Connector Save Your Time To Connect The Torch To Your Plasma Cutter. The Whole Machine Can Be Setup Quickly Within 1 Min..
★ Buy With Confidence: We Offer 30 Days Refund And A 3-Years Limited Warranty: Include 1 Year New Replacement Warranty. ★ Us Based Customer Care & Support Team: Please Feel Free To Contact Us By Phone Or Email, We Always Stand Back On Our Products. Please Submit The Registration Form On Our Website..
★Input: Automatic Dual Voltage 110~125V Or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A And 220V @ 40A. Air Compressor Requirement: 70 Psi @ 4.0Scfm. ★Output: 20-55 A Dc Output, 3/5” Ideal Clean Cut And 1” Maximum Severance Cut Under 220/240V. 20-35A Dc Output, 3/8" Ideal Clean Cut And 1/2" Maximum Severance Cut Under 110/120V. ★Suitable Cutting--For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost..
★ Cnc Enabled Pre-Installed Cnc Interface With Thc (Torch Height Controller) Signal Output. Non-Hf Blowback Start, There Is No Hf Interference On Your Cnc Computer..
Features
- PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5 (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects. Non-HF--Non-HF Blowback Start, there is no HF interference.
- CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.
- SETUP WITHIN 1 MIN--the per-installed NPT 1/4 industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
- INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. OUTPUT: 20-55 A DC output, 3/5 ideal clean cut and 1 maximum severance cut under 220/240V. 20-35A DC output, 3/8 ideal clean cut and 1/2 maximum severance cut under 110/120V. SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
- See more on Amazon...
Brand: LOTOS | Manufacturer: Lotos Technology
See On Amazon #13
AIXZGLOBAL 45A Plasma Cutter, Non-HF Non-Touch Pilot Arc 110/220V Plasma Cutting Machine with Digital Display IGBT Inverter 16mm Max Cut
Asin: B0CVXF45N9 | Model: AIC45 | PartNumber: AIC45
✅【Cutting Technology】: The Plasma Cutter Ideals Cut Cleanliness Of 10Mm, Maximum 16Mm Severance Thickness, Cut Stainless Steel, Carbon Steel, Aluminum, Copper, Titanium And Other Metal Materials With Fast Cutting Speeds And Smooth Cutting Surfaces..
✅【Lightweught & Applicable】: Our Upgraded Plasma Cutter Is Compact, Shaped And Lightweight With An Easy Carry Handle. Weight 11.2Lbs. Dimensions: 28X12x25cm It Is Suitable For Home Diy Hobby, Repair Work, Metal Processing, Site Work, Etc..
✅【Buy With Confidence】: 1 X Power Cable, 1 X Plasma Cutting Torch(3M), 1 X Ground Clamp(1.5M), 1 X Air Hose(3M), 1 X Air Filter Regulator, 1 X Manual. Aixzglobal Provides 30-Day Money Back Guarantee And 2-Years Warranty, If There Are Any Questions, Please Feel Free To Contact Us. Notice: Our Products Have Been Professionally Tested At The Factory..
✅【Igbt & 2T/4T】: This Dual Voltage Plasma Cutting Equipment Adopts Stable And Mature Igbt Inverter Technology. Dc Output Current 15-45A, 50/60Hz, Duty Cycle 60%, Lcd Digital Display Can Easily Control The Voltage And Current, And You Can Select The 2T/4T Mode Through The Display To Meet Your Needs And Choices..
✅【Low-Frequency Start】: Aic45 Plasma Cutter Machine Is Equipped With An Xt45 Low-Frequency Cutting Gun, Which Makes It Easier To Start The Arc, Has A Higher Cutting Success Rate, Has No Interference With The Power Supply And Is Harmless To Human Health..
Features
- NON-TOUCH PILOT ARC : The AIXZGLOBAL plasma cutter features a low-frequency non-touch arc starting mode. The torch head effectively cuts rough, rusty surfaces without touching the metal and produces minimal slag, improving cut quality and extending consumable life.
- LOW-FREQUENCY START : AIC45 plasma cutter machine is equipped with an XT45 low-frequency cutting gun, which makes it easier to start the arc, has a higher cutting success rate, has no interference with the power supply and is harmless to human health.
- CUTTING TECHNOLOGY : The plasma cutter ideals cut cleanliness of 10mm, maximum 16mm severance thickness, cut stainless steel, carbon steel, aluminum, copper, titanium and other metal materials with fast cutting speeds and smooth cutting surfaces.
- IGBT & 2T/4T : This dual voltage plasma cutting equipment adopts stable and mature IGBT inverter technology. DC output current 15-45A, 50/60HZ, duty cycle 60%, LCD digital display can easily control the voltage and current, and you can select the 2T/4T mode through the display to meet your needs and choices.
- LIGHTWEUGHT & APPLICABLE : Our upgraded plasma cutter is compact, shaped and lightweight with an easy carry handle. Weight 11.2LBS. Dimensions: 28x12x25cm It is suitable for home DIY hobby, repair work, metal processing, site work, etc.
- BUY WITH CONFIDENCE : 1 X Power Cable, 1 X Plasma Cutting Torch(3M), 1 X Ground Clamp(1.5M), 1 X Air Hose(3M), 1 X Air Filter Regulator, 1 X Manual. AIXZGLOBAL provides 30-Day Money Back Guarantee and 2-Years Warranty, If there are any questions, please feel free to contact us. Notice: Our products have been professionally tested at the factory.
- See more on Amazon...
Brand: AIXZGLOBAL | Manufacturer: AIXZGLOBAL
Weight: 11.20 pounds
Warranty: 2 years
See On Amazon #14
bestarc Plasma Cutter, BTC800DP 9th Generation 80Amps Pilot Arc Plasma Cutter Machine, Digital Screen Display Dual Voltage 110/220V Plasma Cutting Machine (BTC800DP 9GEN 110/220V)
Asin: B0CXXLTXVB | Model: BTC800DP 9GEN | PartNumber: BTC800DP 9GEN | Ean: 0727431700742 | UPC: 727431700742
[Sensor Of Air Pressure & Air Compressor]: Inside Of Plasma Cutting Machine Have Sensor Of Air Pressure, User Can Adjust The Air Pressure Through The Regulator. The Air Filter Is Installed At The Rear Of The Machine With A Quick Air Connector 1/4 Npt, Which Can Be Used After Opening The Box. Users Can Use It After Connecting To The Air Compressor. Recommended Air Compressor Air Pressure Value Be Within The Range Of 90Psi, 250L/Min..
[Pt/2T/4T/Pa Function]: Post Time Function, With An Adjustment Range Of 3-15 Seconds. Adjust The Cooling Time Of The Torch Head To Extend The Service Life Of Consumables. Generally Speaking, We Recommend A Cooling Time Of 4-8 Seconds. 2T/4T Automatic Cutting Release Your Finger. 2T Is Semi-Automatic Cutting Control, And 4T Is Automatic Cutting Control. Pa Adjust The Time For The Pilot Arc, Longer Seconds Good At Cutting Mesh Metal, Short Seconds Is Good To Extend The Life Of Consumables..
[Cutting Thickness]: Pilot Arc Plasma Cutter Adopting Advanced Igbt Inverter Technology, 50/60Hz High-Frequency Pilot Arc, Dual Voltage 110/220V, 60% Duty Cycle. Current Display At 110V Is 15-40A, Under 220V Current Display Is 15-80A, The Maximum Cutting Thickness Is Recommended To Be 14Mm @ 40A 110V, 50Psi; 25Mm@80A 220V, 60 Psi..
[Digital Screen Display]: The Screen Of The Plasma Cutter Machine Displays The Parameters Centrally Such As Air Pressure, Voltage, And Current, Allowing Users To Understand The Equipment Status In Real-Time And Adjust Operations In A Timely Manner, Improving Operational Efficiency. If Plasma Cutter Cannot Work, The Screen Comes With An Error Code System, Making It Easy To Find Out The Problems..
Features
- [Pilot Arc Function]: BTC800DP 9th bestarc plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. The cutting methods of mesh and plate are added to solve the problem that cutting mesh is easy to break arc.
- [Digital Screen Display]: The screen of the plasma cutter machine displays the parameters centrally such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
- [Sensor of Air Pressure & Air Compressor]: Inside of plasma cutting machine have sensor of air pressure, User can adjust the air pressure through the regulator. The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT, which can be used after opening the box. Users can use it after connecting to the air compressor. Recommended air compressor air pressure value be within the range of 90PSI, 250L/min.
- [Cutting Thickness]: Pilot arc plasma cutter adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-40A, Under 220V current display is 15-80A, the maximum cutting thickness is recommended to be 14mm @ 40A 110V, 50PSI; 25mm@80A 220V, 60 PSI.
- [PT/2T/4T/PA Function]: Post time function, with an adjustment range of 3-15 seconds. Adjust the cooling time of the torch head to extend the service life of consumables. Generally speaking, we recommend a cooling time of 4-8 seconds. 2T/4T automatic cutting release your finger. 2T is semi-automatic cutting control, and 4T is automatic cutting control. PA adjust the time for the pilot arc, longer seconds good at cutting mesh metal, short seconds is good to extend the life of consumables.
- See more on Amazon...
Brand: bestarc | Manufacturer: bestarc
See On Amazon #15
LOTOS LTPDC2000D Non-Touch Pilot Arc Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding Machine, 5/8 Inch Clean Cut,Brown
Asin: B005DO7VDM | Model: 04-ZVGR-0O8D | PartNumber: 04-ZVGR-0O8D | Ean: 0736211806970 | UPC: 736211806970
★ 𝐒𝐭𝐢𝐜𝐤/𝐌𝐦𝐚 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200 Amp Dc Stick/Mma Electric Current Output; Easy Arc Start, Stable Welding Arc; Deep Weld Pool And Beautiful Welding Shape; Adjustable Hot Striking Arc Current Which Can Greatly Improve The Arc-Starting Function; Suitable For Welding With Different Kinds Of Acid Or Basic Electrode..
★ 𝐋𝐢𝐟𝐞𝐭𝐢𝐦𝐞 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭: We Offer A 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞 & 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 Along With A 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 Covered By Our Us Based Lifetime Technical Support. To Avail The Warranty, Please Submit The Warranty Registration Form On Our Website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 Dedicated Customer Service Team Is Readily Available To Assist You Through Phone Or Email..
★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The Pre-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator Allows You To Quick Connect To Your Air Compressor By Using The Stand Coupler Existing On Your Air Compressor. The Whole Machine Can Be Setup Quickly Within 1 Min..
★ 𝐓𝐢𝐠 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200Amp Dc Tig Electric Current Output; Quality Tig Welding On Stainless Or Steel And Precise Welding Of Thinner-Gauge Materials; Hf Arc Start Hand Torch Control And Precise Foot Pedal Welding Heat Control(Foot Pedal & Argon Regulator Are Not Included)..
Features
- - : 10-50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Pilot Arc Torch Efficiently Cuts through Rough, Painted, and Rusty Surfaces and Produces Minimal Slag; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum
- : 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal & Argon Regulator are NOT Included).
- / : 15-200 AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for Welding with Different Kinds of Acid or Basic Electrode.
- : The pre-installed NPT 1/4 industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
- : we offer a - & - along with a - covered by our US based lifetime technical support. To avail the warranty, please submit the warranty registration form on our website. - dedicated customer service team is readily available to assist you through phone or email.
- See more on Amazon...
Brand: LOTOS | Manufacturer: Lotos Technology
Dimensions: 12.50 x 17.00 x 8.00 Inches | Weight: 44.50 Pounds
Warranty: We offer 30 days refund and a 3-YEARS Limited Warranty: Incling 1 Year NEW Replacement Warranty, please submit the registration form on our website.
See On Amazon #16
VEVOR Plasma Cutter, 50Amp, Upgraded Non-Touch Pilot Arc Air Cutting Machine with Torch, 110V/220V Dual Voltage AC IGBT Inverter Metal Cutting Equipment for 1/2" Clean Cut Aluminum and Stainless Steel
Asin: B0CGWTNR5V | Model: 50Amp Non-Touch Plasma Cutter | PartNumber: 50Amp Non-Touch Plasma Cutter | Ean: 0197988268666 | UPC: 197988268666
50Amp Premium Cutter: Use Non-Hazardous Compressed Air To Cut Aluminum, Stainless Steel, Mild Steel, Copper, And Other Metals. Suitable For A Wide Range Of Applications, Including Sheet Metal Fabrication, Light Industrial, Automotive Repair, Plumbing Work, And Other Maintenance Services. You'll Be Prepared To Take On Any Challenge!.
More Than You Expected: The Extra Long 16.4' Plasma Torch And 6.56' Ground Clamp With Cable Offers Maximum Convenience By Extending Your Working Area. Quit Wasting Time Searching For An Extension Cord And Adapter. The Kit Also Includes An Air Regulator, Air Hose, 4 Hose Clamps, 2 Cable Racks, And Some Consumables..
Sharper Than Sharp: The Gastight Air Filter Regulator Allows You To Quickly Connect To Your Air Compressor. It Can Lower Or Maintain Air Pressure To Reach Effective Cutting. And You Can Cut Through Rough, Painted, And Rusty Surfaces While Producing Minimal Slag Without Any Air Leakage..
All Safety No Heat: The Unique Air Channel Design Increases The Heat Dissipation Of The Power Device. The Igbt Inverter Will Greatly Improve The Performance Of The Plasma Cutting Machine. The Outstanding 30%@104 °F, 50A; 60%@104 °F, 33A; 100%@104 °F, 25A Duty Cycle Can Also Ensure Long-Time Cutting..
Features
- Non-Touch Pilot Arc: Pilot arc technology allows you to cut without touching the tip of the metal. This plasma cutter pilot arc delivers a consistent and precise current to the cutting surface with better cutting quality and longer consumable life. Ideal Clean Cut: 1/2"(12 mm). Maximum Severance Cut: 5/8"(16 mm).
- All Safety No Heat: The unique air channel design increases the heat dissipation of the power device. The IGBT inverter will greatly improve the performance of the plasma cutting machine. The outstanding 30%@104 F, 50A; 60%@104 F, 33A; 100%@104 F, 25A duty cycle can also ensure long-time cutting.
- 50AMP Premium Cutter: Use non-hazardous compressed air to cut aluminum, stainless steel, mild steel, copper, and other metals. Suitable for a wide range of applications, including sheet metal fabrication, light industrial, automotive repair, plumbing work, and other maintenance services. You'll be prepared to take on any challenge!
- Sharper than Sharp: The gastight air filter regulator allows you to quickly connect to your air compressor. It can lower or maintain air pressure to reach effective cutting. And you can cut through rough, painted, and rusty surfaces while producing minimal slag without any air leakage.
- More than You Expected: The extra long 16.4' plasma torch and 6.56' ground clamp with cable offers maximum convenience by extending your working area. Quit wasting time searching for an extension cord and adapter. The kit also includes an air regulator, air hose, 4 hose clamps, 2 cable racks, and some consumables.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 10.80 x 19.10 x 13.60 Inches | Weight: 20.00 pounds
See On Amazon #17
DURATECH Plasma Cutter, 40Amp Non-Touch Pilot Arc Plasma Cutting Machine with 120V/240V Dual Voltage IGBT Inverter, Digital Display and 50A to 15A Plug Adapter, Plasma Cutting Equipment 1/2" Clean Cut
Asin: B0B878P5FH | Ean: 0820909779841 | UPC: 820909779841
【Lightweight And Portable】This Compact Plasma Cutter Is 14-3/8" L * 8-5/8" W * 6" H And Weighs 14.4 Lbs, Making It Easy To Use In Different Environments. Lightweight For Both Men And Women. Beautiful Design, Ideal Gifts!.
【Added Safety】This Non-Touch Pilot Arc Plasma Cutter Is Certificated By Csa And The Power Cord Is Ul Listed, Automatic Compensation For Voltage Fluctuation, Over-Current Protection, Overload Protection, And Temperature Control. Please Try With Confidence. Any Problems, Please Feel Free To Get In Touch With Us.
【Wide Cutting Ability】This 40 Amp Professional Plasma Cutter Is Suitable For Cutting Aluminum, Magnesium Alloys, Brass, Stainless Steel, Cast Iron, Steel, Copper, Copper, Titanium, And Other Metal Materials. It Is Very Friendly To Both Diy, Beginner Cutter, And Professional Workers.
【Powerful Clean Cut】Automatic Dual Voltage 120V And 240V For The Wide Use Of Light-Duty Work And Heavy-Duty Construction Site Work. 1/2" Clean Cut Thickness And 11/16" Maximum Severance Cut Thickness Under 240V.
Features
- NON-TOUCH PLASMA CUTTER This plasma cutter can effectively cut rough, painted, rusted metal with less slag. Pilot arc technology allows you to cut without touching the tip to the metal for better cutting quality and a longer consumable life
- POWERFUL CLEAN CUT Automatic dual voltage 120V and 240V for the wide use of light-duty work and heavy-duty construction site work. 1/2 clean cut thickness and 11/16 maximum severance cut thickness under 240V
- LIGHTWEIGHT AND PORTABLE This compact plasma cutter is 14-3/8 L * 8-5/8 W * 6 H and weighs 14.4 lbs, making it easy to use in different environments. Lightweight for both men and women. Beautiful design, ideal gifts!
- WIDE CUTTING ABILITY This 40 amp professional plasma cutter is suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, copper, titanium, and other metal materials. It is very friendly to both DIY, beginner cutter, and professional workers
- ADDED SAFETY This non-touch pilot arc plasma cutter is certificated by CSA and the power cord is UL listed, automatic compensation for voltage fluctuation, over-current protection, overload protection, and temperature control. Please try with confidence. Any problems, please feel free to get in touch with us
- See more on Amazon...
Brand: DURATECH | Manufacturer: Hangzhou Great Star Industrial Co,.LTD
Dimensions: 6.00 x 14.38 x 8.63 inches | Weight: 14.40 pounds
Warranty: 2 year warranty
See On Amazon #18
Lotos Supreme LTP5500D Non-Touch Pilot Arc Digital Plasma Cutter, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown
Asin: B07FWR1QXF | Model: LTP5500D | PartNumber: LTP5500D | Ean: 0856381005949 | UPC: 856381005949
★Input: Automatic Dual Voltage 110~125V Or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A And 220V @ 40A. Air Compressor Requirement: 70 Psi @ 4.0Scfm. ★Output: 20-55 A Dc Output, 3/5” Ideal Clean Cut And 1” Maximum Severance Cut Under 220/240V. 20-35A Dc Output, 3/8" Ideal Clean Cut And 1/2" Maximum Severance Cut Under 110/120V. ★Suitable Cutting--For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost..
★ Buy With Confidence: We Offer 30 Days Refund And A 3-Years Limited Warranty: Include 1 Year New Replacement Warranty. ★ Us Based Customer Care & Support Team: Please Feel Free To Contact Us By Phone Or Email, We Always Stand Back On Our Products. Please Submit The Registration Form On Our Website..
★ Package Includes-- Power Supply, Blowback Non-Hf Start Cutting Torch, Consumables, Ground Clamp, Pre-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator..
★ Setup Within 1 Min--The Per-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator Allows You To Quick Connect To Your Air Compressor By Using The Stand Coupler Existing On Your Air Compressor. The Non-Hf Start Torch With Central Connector Save Your Time To Connect The Torch To Your Plasma Cutter. The Whole Machine Can Be Setup Quickly Within 1 Min..
Features
- PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5 (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects. Non-HF--Non-HF Blowback Start, there is no HF interference.
- SETUP WITHIN 1 MIN--the per-installed NPT 1/4 industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
- INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. OUTPUT: 20-55 A DC output, 3/5 ideal clean cut and 1 maximum severance cut under 220/240V. 20-35A DC output, 3/8 ideal clean cut and 1/2 maximum severance cut under 110/120V. SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- PACKAGE INCLUDES-- power supply, blowback Non-HF start cutting torch, consumables, ground clamp, Pre-installed NPT 1/4 industry type D plug and Air filter regulator.
- BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
- See more on Amazon...
Brand: LOTOS | Manufacturer: Lotos Technology
Dimensions: 13.78 x 19.69 x 11.81 inches
See On Amazon #19
Plasma Cutter Pilot Arc,120/240V Dual Voltage Non Touch Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI
Asin: B08CRFDPHG | Ean: 0793565676994 | UPC: 793565676994
Plasma Cutter With Current Display, Also With Air Post Time Adjust Function, The Adjustment Range Is 2-15 Seconds ,This Function Allow User Adjust The Time For Post Air To Cool Torch Head Effectively Provide Cooling, And Extend The Working Life Of Consumables.
Accessories Come With Machine, 4M Pilot Arc Ag60p Cutting Torch, Earth Clamp With 2.5M Cable, 2 Pcs Tips, 2 Pcs Electrodes, 2 Meters Air Hose, 4 Pcs Hose Clamp, 1 Conversion Wire Adaptor, 1 Manual. Following Accessories Are Not Included In Package, They Are Fixed At Machine: Air Regulator, Air Filter, Air Gauge.
This Plasma Cutter Is Dual Voltage 110/220V, It Is Auto Indicate The Input Voltage, No Need To Switch The Voltage By Handle On Side Of Machine, But Still Need To Plug Machine By Hand To Different Power Source. 110V To 220V Power Plug Adaptor Conversion Cord Will Come With Machine ..
Plasma Cutting Machine 60% Duty Cycle In 50Amps, 100% Duty Cycle In 40Amps Under 240V, 18Mm Max Cutting Thickness, 12Mm Quality Cutting Thickness In 240V@60Psi 50A; Under 120V, It Is 35Amps. Quality Cutting Thickness Is 12Mm, Severance Cutting Thickness 12Mm In 120V@60Psi 35Amps.
Features
- Pilot Arc Plasma cutter :50Amps Plasma cutter with pilot arc function,Very easy to cut Rust/Dust/painted metal. It is made of high quality electronic power components, This machine adopt latest IGBT Advanced inverter soft switch technology, Nice cutting surface at 12mm thick, Machine come with high quality consumables
- Plasma Cutting machine 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 240v, 18mm max cutting thickness, 12mm quality cutting thickness in 240v@60PSI 50A; Under 120V, it is 35Amps. Quality cutting thickness is 12mm, Severance cutting thickness 12mm in 120V@60PSI 35Amps
- Plasma cutter with current display, Also with air post time adjust function, the adjustment range is 2-15 seconds ,this function allow user adjust the time for post air to cool torch head effectively provide cooling, and extend the working life of consumables
- This plasma cutter is dual voltage 110/220V, It is auto indicate the input voltage, no need to switch the voltage by handle on side of machine, But still need to plug machine by hand to different power source. 110V to 220V power plug adaptor conversion cord will come with machine .
- Accessories come with machine, 4M Pilot arc AG60P cutting torch, Earth clamp with 2.5M cable, 2 pcs tips, 2 pcs electrodes, 2 meters air hose, 4 pcs hose clamp, 1 conversion wire adaptor, 1 manual. Following accessories are not included in package, they are fixed at machine: Air regulator, air filter, air gauge
- See more on Amazon...
Brand: WARFOX | Manufacturer: warfox
See On Amazon
Looking For Something Else?
Search