uxcell 2 Pcs High Speed Steel Hex Shank Twist Drill Bit, 3mm Drilling Dia with 1/4 Inch Hex Shank 80mm Length
Asin: B09YTZGPCG | Model: a22032200ux1024 | PartNumber: a22032200ux1024
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.135-Degree Split Point Tip Design: Can Drill With Less Force And Good Radial Stability. Easier Chip Evacuation, Better Heat Dissipation And Increased Drill Durability..
Quick Change: Compared With The Ordinary Drill, With A Quick Change Hexagonal Handle, Handle Diameter 6.35Mm (1/4 "), Fixture Is More Stable, More Convenient To Replace..
Application: Suitable For Drilling Holes In Alloy Steel, Wood, Nonferrous Metal, Cast Iron And Hard Plastics.
Material: Made Of High Speed Steel With Dual Coating Of Gold Titanium And Black Nitride For Better Lubrication, Smoother Drilling. Increase The Hardness Of The Drill, With Good Wear Resistance And Durability..
Features
- Specification: Shank: 1/4-inch Hex; Drill Diameter: 3mm / 0.12-inch; Total Length: 80mm / 3.15-inch; Drill Bit Length: 31mm / 1.22-inch; 2 x Twist Drill Bits
- Material: Made of high speed steel with dual coating of gold titanium and black nitride for better lubrication, smoother drilling. Increase the hardness of the drill, with good wear resistance and durability.
- 135-degree Split Point Tip Design: Can drill with less force and good radial stability. Easier chip evacuation, better heat dissipation and increased drill durability.
- Application: Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics
- Quick Change: Compared with the ordinary drill, with a quick change hexagonal handle, handle diameter 6.35mm (1/4 ), fixture is more stable, more convenient to replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 2 Pcs High Speed
#1
uxcell Straight Shank Twist Drill Bits 6mm High Speed Steel 4341 with 6mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CY7MCS | Model: a19102500ux0119 | PartNumber: a19102500ux0119
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 6mm / 0.24"; Shank Diameter : 6mm / 0.24"; Cutting Edge Length: 53mm / 2.09"; Total Length : 90mm / 3.54"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell Straight Shank Twist Drill Bits 8.5mm High Speed Steel 4341 with 8.5mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D2FKZF | Model: a19102500ux0131 | PartNumber: a19102500ux0131
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 8.5mm / 0.33"; Shank Diameter : 8.5mm / 0.33"; Cutting Edge Length: 76mm / 3"; Total Length : 115mm / 0.59"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Straight Shank Twist Drill Bits 12mm High Speed Steel 4341 with 12mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D9FLX6 | Model: a19102500ux0144 | PartNumber: a19102500ux0144
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 12mm / 0.47"; Shank Diameter : 12mm / 0.47"; Cutting Edge Length: 102mm / 4.02"; Total Length : 150mm / 5.91"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #4
uxcell Straight Shank Twist Drill Bits 3mm High Speed Steel 4341 with 3mm Shank 5 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082DBF4PN | Model: a19102500ux0100 | PartNumber: a19102500ux0100
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 3mm / 0.12"; Shank Diameter : 3mm / 0.12"; Cutting Edge Length: 27mm / 1.06"; Total Length : 60mm / 2.36"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #5
uxcell TC613 Thrust Needle Roller Bearings with Washers 3/8" Bore 13/16" OD 5/64" Width 5pcs
Asin: B07VWT1X34
[Features] - Needle Roller Thrust Bearings Can Accommodate Axial Loads In One Direction Only.
[Capability] - 12.18Kn Static Load Capacity, 4.84Kn Dynamic Load Capacity, 23000Rpm Maximum Rotational Speed.
[Washer] - Combined With 2 Washers For Applications Where Adjacent Machine Components Cannot Serve As Raceways.
[Material] - Chromium Steel Rollers For Heat Tolerance And Durability Under Heavy Loads; Steel Cage Guides And Evenly Spaced Rollers For Reduced Friction, Vibration, And Noise.
Features
- [MODLE] - Bearing Model: TC613 (I.D.=3/8", O.D.=13/16", Thickness=5/64"); Washer Model: TRA613
- [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
- [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only
- [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
- [CAPABILITY] - 12.18kN Static Load Capacity, 4.84kN Dynamic Load Capacity, 23000RPM Maximum Rotational Speed
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell PCB Drill Bits 1mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 10 Pcs
Asin: B07ZW478JQ
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 1mm; cutting edge length: 9.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell TC1018 Thrust Needle Roller Bearings with Washers 5/8" Bore 1-1/8" OD 5/64" Width 2pcs
Asin: B07VZXKWBD | Model: a19043000ux0091 | PartNumber: a19043000ux0091
[Features] - Needle Roller Thrust Bearings Can Accommodate Axial Loads In One Direction Only.
[Capability] - 22.55Kn Static Load Capacity, 7.07Kn Dynamic Load Capacity, 16000Rpm Maximum Rotational Speed.
[Washer] - Combined With 2 Washers For Applications Where Adjacent Machine Components Cannot Serve As Raceways.
[Material] - Chromium Steel Rollers For Heat Tolerance And Durability Under Heavy Loads; Steel Cage Guides And Evenly Spaced Rollers For Reduced Friction, Vibration, And Noise.
Features
- [MODLE] - Bearing Model: TC1018 (I.D.=5/8", O.D.=1-1/8", Thickness=5/64"); Washer Model: TRA1018
- [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
- [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only
- [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
- [CAPABILITY] - 22.55kN Static Load Capacity, 7.07kN Dynamic Load Capacity, 16000RPM Maximum Rotational Speed
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell Straight Shank Twist Drill Bits 2.5mm High Speed Steel 4341 with 2.5mm Shank 10 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D4CLHN | Model: a19102500ux0097 | PartNumber: a19102500ux0097
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 2.5mm / 0.1"; Shank Diameter : 2.5mm / 0.1"; Cutting Edge Length: 26mm / 1.02"; Total Length : 55mm / 2.17"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell PCB Drill Bits 1.1mm-2.0mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVSJZXN | Model: a19091500ux0224 | PartNumber: a19091500ux0224
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm; Cutting Edge Length: 10.5mm, 10.5mm, 12mm, 10.5mm, 12mm, 10.5mm, 12mm, 12mm, 12mm, 12mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell AXK80105 Thrust Needle Roller Bearings with Washers 80mm Bore 105mm OD 4mm Width
Asin: B07GC94P6Y | Model: a18070500ux0486 | PartNumber: a18070500ux0486
[Features] - Needle Roller Thrust Bearings Can Accommodate Axially Loads In One Direction Only.
[Capability] - 278.5Kn Static Load Capacity, 55.6Kn Dynamic Load Capacity, 2600Rpm Maximum Rotational Speed.
[Washer] - Combined With 2 Washers For Applications Where Adjacent Machine Components Cannot Serve As Raceways.
[Material] - Chromium Steel Rollers For Heat Tolerance And Durability Under Heavy Loads; Steel Cage Guides And Evenly Spaced Rollers For Reduced Friction, Vibration, And Noise.
Features
- [MODLE] - Bearing Model: AXK80105 (I.D.=80mm, O.D.=105mm, Thickness=4mm); Washer Model: AS80105
- [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
- [FEATURES] - Needle Roller Thrust Bearings can accommodate axially loads in one direction only
- [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
- [CAPABILITY] - 278.5kN Static Load Capacity, 55.6kN Dynamic Load Capacity, 2600RPM Maximum Rotational Speed
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 5.51 x 3.94 inches | Weight: 0.23 pounds
See On Amazon #11
uxcell 2pcs Round Steel Metal Rods, 8mm x 100mm High Speed Steel (HSS) Lathe Bar Stock Tool, for Shaft Gear Drill Lathes Boring Machine Turning Miniature DIY Craft, 2pcs
Asin: B07KY8858F | Model: a18102400ux0418 | PartNumber: a18102400ux0418
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Round Metal Rods: Diameter: 8mm / 0.31"; length: 100mm / 3.93". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 0.79 inches
See On Amazon #12
uxcell Round Steel Rod, 5mm HSS Lathe Bar Stock Tool 200mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool, 2pcs
Asin: B07KT39M7P | Model: a18103100ux0119 | PartNumber: a18103100ux0119
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 5mm / 0.2"; length: 200mm / 7.87". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 7.48 x 5.91 inches
See On Amazon #13
uxcell 2 Pcs High Speed Steel Hex Shank Twist Drill Bit, 5mm Drilling Dia with 1/4 Inch Hex Shank 105mm Length
Asin: B09YV147H1 | Model: a22032200ux1045 | PartNumber: a22032200ux1045
135-Degree Split Point Tip Design: Can Drill With Less Force And Good Radial Stability. Easier Chip Evacuation, Better Heat Dissipation And Increased Drill Durability..
Quick Change: Compared With The Ordinary Drill, With A Quick Change Hexagonal Handle, Handle Diameter 6.35Mm (1/4 "), Fixture Is More Stable, More Convenient To Replace..
Application: Suitable For Drilling Holes In Alloy Steel, Wood, Nonferrous Metal, Cast Iron And Hard Plastics.
Material: Made Of High Speed Steel With Dual Coating Of Gold Titanium And Black Nitride For Better Lubrication, Smoother Drilling. Increase The Hardness Of The Drill, With Good Wear Resistance And Durability..
Features
- Specification: Shank: 1/4-inch Hex; Drill Diameter: 5mm / 0.2-inch; Total Length: 105mm / 4.13-inch; Drill Bit Length: 47mm / 1.85-inch; 2 x Twist Drill Bits
- Material: Made of high speed steel with dual coating of gold titanium and black nitride for better lubrication, smoother drilling. Increase the hardness of the drill, with good wear resistance and durability.
- 135-degree Split Point Tip Design: Can drill with less force and good radial stability. Easier chip evacuation, better heat dissipation and increased drill durability.
- Application: Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics
- Quick Change: Compared with the ordinary drill, with a quick change hexagonal handle, handle diameter 6.35mm (1/4 ), fixture is more stable, more convenient to replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 51204 Miniature Thrust Ball Bearing 20mm x 40mm x 14mm Chrome Steel with Washer 2pcs
Asin: B08NJ6H55B
[Capability] - Dynamic Load Rating (Cr): 21100N; Static Load Rating (Cor): 23900N; Limiting Speed (Grease): 4500Rpm, Designed For Low Speed Operation And Axial Loads Only.
[Features] - The Separable Components Of Thrust Ball Bearings Are Interchangeable. Low Noise And Long Service Life, Easy To Maintain. Keep The Bearing Working Environment Clean And Bearing Lubricated In Time.
[Application] - Can Be Used For Oven Turntable, Jack, Pump, Rotating Applications, Machine Tools, Automobile, Ect. It Is Also Suitable For Parts Bearing Axial Load On One Side And Low Speed, Such As Machinery Manufacturing, Equipment Installation And Maintenance..
[Material] - Made Of Chrome Steel(Aisi 52100), Have Great Wear-Resistant, High Temperature Resistance And High Hardness, High Speed, High Precision, High Torque, And Low Friction..
Features
- [SIZE] - Bore Diameter=20mm, Outer Diameter=40mm, Thickness=14mm
- [MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness, high speed, high precision, high torque, and low friction.
- [CAPABILITY] - Dynamic Load Rating (Cr): 21100N; Static Load Rating (Cor): 23900N; Limiting Speed (Grease): 4500rpm, designed for low speed operation and axial loads only
- [APPLICATION] - Can be used for oven turntable, jack, pump, rotating applications, machine tools, automobile, ect. It is also suitable for parts bearing axial load on one side and low speed, such as machinery manufacturing, equipment installation and maintenance.
- [FEATURES] - The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell PCB Drill Bits 0.5mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVSNLX8 | Model: a19091500ux0218 | PartNumber: a19091500ux0218
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.5mm; cutting edge length: 7mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #16
uxcell PCB Drill Bits 0.6mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 10 Pcs
Asin: B07ZWHV7X7 | Model: a19091500ux0177 | PartNumber: a19091500ux0177
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.6mm; cutting edge length: 9.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 5 Pcs High Speed Steel Hex Shank Twist Drill Bit, 5mm Drilling Dia with 1/4 Inch Hex Shank 105mm Length
Asin: B09YV1GC5C | Model: a22032200ux1046 | PartNumber: a22032200ux1046
135-Degree Split Point Tip Design: Can Drill With Less Force And Good Radial Stability. Easier Chip Evacuation, Better Heat Dissipation And Increased Drill Durability..
Quick Change: Compared With The Ordinary Drill, With A Quick Change Hexagonal Handle, Handle Diameter 6.35Mm (1/4 "), Fixture Is More Stable, More Convenient To Replace..
Application: Suitable For Drilling Holes In Alloy Steel, Wood, Nonferrous Metal, Cast Iron And Hard Plastics.
Material: Made Of High Speed Steel With Dual Coating Of Gold Titanium And Black Nitride For Better Lubrication, Smoother Drilling. Increase The Hardness Of The Drill, With Good Wear Resistance And Durability..
Features
- Specification: Shank: 1/4-inch Hex; Drill Diameter: 5mm / 0.2-inch; Total Length: 105mm / 4.13-inch; Drill Bit Length: 47mm / 1.85-inch; 5 x Twist Drill Bits
- Material: Made of high speed steel with dual coating of gold titanium and black nitride for better lubrication, smoother drilling. Increase the hardness of the drill, with good wear resistance and durability.
- 135-degree Split Point Tip Design: Can drill with less force and good radial stability. Easier chip evacuation, better heat dissipation and increased drill durability.
- Application: Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics
- Quick Change: Compared with the ordinary drill, with a quick change hexagonal handle, handle diameter 6.35mm (1/4 ), fixture is more stable, more convenient to replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 5mm Chucking Reamer, HSS Cobalt M35 Lathe Machine Reamer D4 6 Straight Flutes, Round Shank Milling Cutting Tool, for Stainless Steel Alloy Copper Metal
Asin: B08FB14TPZ | Model: a19112600ux0376 | PartNumber: a19112600ux0376
Round Shank: Can Be Used With A Wide Variety Of Tool Holding Systems. Good For Use In Through Or Blind Holes And Used For Light Cut, Repair Work, Removing Stock.
Application: Designed For Accurate Reaming In Stainless Steel, Alloy Steel And Other Metal Materials, Used On Equipment Including Screw Machines, Turret Lathes, Drill Presses And Machining Centers.
Features: Straight Flute Tool Allows Chips To Collect In The Flutes When Cutting, Well Suited For Most Applications In Shallow Cuts. Reamer Is With High Hardness, Toughness, Wear Resistance, Long Service Life.
Uncoated Tool: Features Just The Base Substrate Without Any Additional Treatment Or Coatings. Heat Treated And Quenched For Stable Performance, Suitable For Wide Ranges Of Applications.
Features
- Specifications: Cutting dia.: 5mm / 0.2"; tool flute length: 18mm / 0.71"; overall length: 85mm / 3.35"; accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications
- Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock
- Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life
- Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 2 Pcs High Speed Steel Hex Shank Twist Drill Bit, 8.5mm Drilling Dia with 1/4 Inch Hex Shank 117mm Length
Asin: B09YV1LTFM | Model: a22032200ux1069 | PartNumber: a22032200ux1069
135-Degree Split Point Tip Design: Can Drill With Less Force And Good Radial Stability. Easier Chip Evacuation, Better Heat Dissipation And Increased Drill Durability..
Quick Change: Compared With The Ordinary Drill, With A Quick Change Hexagonal Handle, Handle Diameter 6.35Mm (1/4 "), Fixture Is More Stable, More Convenient To Replace..
Application: Suitable For Drilling Holes In Alloy Steel, Wood, Nonferrous Metal, Cast Iron And Hard Plastics.
Material: Made Of High Speed Steel With Dual Coating Of Gold Titanium And Black Nitride For Better Lubrication, Smoother Drilling. Increase The Hardness Of The Drill, With Good Wear Resistance And Durability..
Features
- Specification: Shank: 1/4-inch Hex; Drill Diameter: 8.5mm / 0.33-inch; Total Length: 117mm / 4.61-inch; Drill Bit Length: 74mm / 2.91-inch; 2 x Twist Drill Bits
- Material: Made of high speed steel with dual coating of gold titanium and black nitride for better lubrication, smoother drilling. Increase the hardness of the drill, with good wear resistance and durability.
- 135-degree Split Point Tip Design: Can drill with less force and good radial stability. Easier chip evacuation, better heat dissipation and increased drill durability.
- Application: Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics
- Quick Change: Compared with the ordinary drill, with a quick change hexagonal handle, handle diameter 6.35mm (1/4 ), fixture is more stable, more convenient to replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search