uxcell Twist Drill Bit, 2.25mm Diameter 4mm Shank Titanium Coated Tungsten Carbide Short Length Drill Bit Straight Shank for Stainless Steel Alloy Steel
Asin: B09ZVF7RBT | Model: a22032700ux0216 | PartNumber: a22032700ux0216
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Carbide Material: Made Of Super Fine Grain Carbide, It Has High Hardness (Hrc92), High Strength, And Wear Resistance. With Good Milling And Cutting Performance, Carbide Can Run At Higher Speed Than High-Speed Steel..
Tips: Used On Machining Centers, Cnc Lathes, Cnc Engraving And Milling Machine. The Longer The Length Of The Tool Clamped By The Chuck, The Better. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life And Obtain Better Processing Accuracy And Performance..
Features: Large And Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Suitable For Drilling Materials Below Hrc60, Such As Stainless Steel, Alloy Steel, Tool Steel, Carbon Steel. Titanium Nanometer Coating Provides Excellent Corrosion Resistance, Greatly Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction..
Features
- Twist Drill Bits: Cutting edge diameter: 2.25mm / 0.089"; shank diameter: 4mm / 0.16"; cutting edge length: 12mm / 0.47"; overall length: 50mm / 2"; point angle: 118 degree. The passivation treatment greatly increases corrosion resistance and wear resistance.
- Wide Applications: Suitable for drilling materials below HRC60, such as stainless steel, alloy steel, tool steel, carbon steel. Titanium nanometer coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction.
- Carbide Material: Made of super fine grain carbide, it has high hardness (HRC92), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
- Features: Large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes, CNC engraving and milling machine. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell Twist Drill Bit 2.25mm
#1
uxcell Straight Shank Twist Drill Bits 2.5mm High Speed Steel 4341 with 2.5mm Shank 5 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D1JCN1 | Model: a19102500ux0096 | PartNumber: a19102500ux0096
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 2.5mm / 0.1"; Shank Diameter : 2.5mm / 0.1"; Cutting Edge Length: 26mm / 1.02"; Total Length : 55mm / 2.17"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #2
uxcell HSS(High Speed Steel) Extra Long Twist Drill Bits, 2.5mm Drill Diameter 160mm Length for Hardened Metal Woodwork Plastic Aluminum Alloy 2 Pcs
Asin: B09XVG1F45 | Model: a22031100ux0258 | PartNumber: a22031100ux0258
[Twisted Design]- With The Twisted Design, It Can Improve Cutting Accuracy By Centering The Tip. It Can Avoid Displacement Of The Drill Bit During Work, And At The Same Time Remove Debris And Particles Faster And Easier..
[Note]- Please Keep Cool And Gentle Using, The Working Life Of The Twist Drill Bits Can Be Largely Prolonged By Proper Usage..
[Professional And Diy Use]- Suitable For Processing Non-Ferrous Metals, Such As Copper And Aluminum, And Also Suitable For Hard Plastics. When It Cannot Penetrate, Try To Adjust The Rpm. Suitable For Electric Hand Drill, Bench Drill And Machine Tool Equipment..
[Strength And Hardness]- Made Of High-Speed Steel. Hss(High Speed Steel) Enables The Drill Body Harder And Can Keep A Longer Drilling Life..
Features
- [Specifications]- Twist Drill Bits Diameter: 2.5mm / 0.1-inch; Drill Bit Length:100mm / 3.94-inch; Shank Diameter: 2.5mm / 0.1-inch; Total Length: 160mm / 6.3-inch; 2 x Straight Shank Twist Drill Bit
- [Strength and Hardness]- Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
- [Twisted Design]- With the twisted design, it can improve cutting accuracy by centering the tip. It can avoid displacement of the drill bit during work, and at the same time remove debris and particles faster and easier.
- [Professional and DIY Use]- Suitable for processing non-ferrous metals, such as copper and aluminum, and also suitable for hard plastics. When it cannot penetrate, try to adjust the RPM. Suitable for electric hand drill, bench drill and machine tool equipment.
- [Note]- Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Solid Carbide Drill Bits, 2mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic
Asin: B09XDWMWZ8 | Model: a22021800ux0543 | PartNumber: a22021800ux0543
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 2mm / 0.079"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #4
uxcell 3pcs 2.5mm Twist Drill w Titanium Coated High Speed Steel Bit HSS M35 CO for Steel,Copper,Aluminum Alloy
Asin: B07J4H39KY | Model: a18081100ux0292 | PartNumber: a18081100ux0292
Parameter - Shank / Cutting Edge Diameter : 2.5Mm;Cutting Edge Length : 28Mm;Total Length : 56Mm..
Package Content: 3Pcs X Twist Drill Bit..
Application - Perfect For Stainless Steel, Copper, Aluminum Alloy,As Well Suit For Wood,Plastic..
Material - M35 Hss With Co,Titanium Coated..
Features
- PRODUCT NAME - Twist Drill Bit.
- MATERIAL - M35 HSS with CO,Titanium Coated.
- PARAMETER - Shank / Cutting Edge Diameter : 2.5mm;Cutting Edge Length : 28mm;Total Length : 56mm.
- APPLICATION - Perfect for stainless steel, copper, aluminum alloy,as well suit for wood,plastic.
- PACKAGE CONTENT: 3pcs x Twist Drill Bit.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 5.51 x 3.94 Inches | Weight: 0.00 pounds
See On Amazon #5
uxcell 12pcs Jobber Drill Bits 2.5mm (0.098") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Asin: B0CN9HKT68
Black & Gold Finish: Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
Tips: Use An Appropriate Lubricant To Reduce Friction And Heat Build-Up. Controlling The Speed Is Very Important, Recommended Speed: 100-800Rpm/Min. The Larger The Diameter, The Slower The Speed Required. If The Hole Is Larger Than 6Mm, First Drill A Small Hole With A 3.2Mm-4Mm Drill Bit, And Then Use A Larger Drill Bit To Enlarge The Hole..
Wide Applications: Drill Bits Produce Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Most Suitable For Drilling Metals With A Hardness Less Than Hrc38, And Cannot Drill Quenched Metals, Tiles, Concrete, Walls, Stones..
M2 High Speed Steel: M2 High Speed Steel (Hrc64-66) Drill Bits Offer Excellent Heat Resistance And Hardness For Durability And Longevity, As Well As Good Cutting Performance And Accuracy For Clean, Precise Holes With Minimal Burrs..
Features
- Twist Drill Bits: Cutting edge diameter: 2.5mm / 0.098"; round shank diameter: 2.5mm / 0.098"; cutting edge length: 30mm / 1.18"; overall length: 57mm / 2.24"; split point: 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
- M2 High Speed Steel: M2 high speed steel (HRC64-66) drill bits offer excellent heat resistance and hardness for durability and longevity, as well as good cutting performance and accuracy for clean, precise holes with minimal burrs.
- Black & Gold Finish: Black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Wide Applications: Drill bits produce holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Most suitable for drilling metals with a hardness less than HRC38, and cannot drill quenched metals, tiles, concrete, walls, stones.
- Tips: Use an appropriate lubricant to reduce friction and heat build-up. Controlling the speed is very important, recommended speed: 100-800rpm/min. The larger the diameter, the slower the speed required. If the hole is larger than 6mm, first drill a small hole with a 3.2mm-4mm drill bit, and then use a larger drill bit to enlarge the hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 6pcs Jobber Drill Bits 2.5mm (0.098") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Asin: B0CN9F9Y9Q
Black & Gold Finish: Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
Tips: Use An Appropriate Lubricant To Reduce Friction And Heat Build-Up. Controlling The Speed Is Very Important, Recommended Speed: 100-800Rpm/Min. The Larger The Diameter, The Slower The Speed Required. If The Hole Is Larger Than 6Mm, First Drill A Small Hole With A 3.2Mm-4Mm Drill Bit, And Then Use A Larger Drill Bit To Enlarge The Hole..
Wide Applications: Drill Bits Produce Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Most Suitable For Drilling Metals With A Hardness Less Than Hrc38, And Cannot Drill Quenched Metals, Tiles, Concrete, Walls, Stones..
M2 High Speed Steel: M2 High Speed Steel (Hrc64-66) Drill Bits Offer Excellent Heat Resistance And Hardness For Durability And Longevity, As Well As Good Cutting Performance And Accuracy For Clean, Precise Holes With Minimal Burrs..
Features
- Twist Drill Bits: Cutting edge diameter: 2.5mm / 0.098"; round shank diameter: 2.5mm / 0.098"; cutting edge length: 30mm / 1.18"; overall length: 56mm / 2.2"; split point: 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
- M2 High Speed Steel: M2 high speed steel (HRC64-66) drill bits offer excellent heat resistance and hardness for durability and longevity, as well as good cutting performance and accuracy for clean, precise holes with minimal burrs.
- Black & Gold Finish: Black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Wide Applications: Drill bits produce holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Most suitable for drilling metals with a hardness less than HRC38, and cannot drill quenched metals, tiles, concrete, walls, stones.
- Tips: Use an appropriate lubricant to reduce friction and heat build-up. Controlling the speed is very important, recommended speed: 100-800rpm/min. The larger the diameter, the slower the speed required. If the hole is larger than 6mm, first drill a small hole with a 3.2mm-4mm drill bit, and then use a larger drill bit to enlarge the hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 2.3mm Drill Bits High Speed Steel Straight Shank 52mm Length Twist Drill Bit Fully Ground Titanium Coated 6 Pcs
Asin: B099J9DFWR | Model: a21013000ux0266 | PartNumber: a21013000ux0266
[Professional And Diy Use]- Suitable For Hardened Materials And Hard Metals, Such As Cast Iron, Hard Plastics, And Also Suitable For Soft Materials. When It Cannot Penetrate, Try To Adjust The Rpm..
[Note]- Please Keep Cool And Gentle Using, The Working Life Of The Twist Drill Bits Can Be Largely Prolonged By Proper Usage.
[Twisted Design]- With A 120° Angle Point And Twist Design, It Can Increase The Cutting Speed Through Automatic Centering; Avoid Displacement During The Work Process, And At The Same Time Remove Debris And Particles Faster And Easier. The Straight Shank Can Be Firmly Fixed And Accurately Centered, Suitable For Standard Drill Chucks And Conventional Round Chucks..
[Strength And Hardness]: Made Of High-Speed 6542 Steel, Rock Wall Hardness Grade Hrc 63-66. With Titanium Coating Treatment, It Is Reliable And Durable..
Features
- [Package content]- 6 Pcs 2.3mm Drill Dia High Speed Steel straight shank twist drills.
- [Strength and Hardness]: Made of high-speed 6542 steel, rock wall hardness grade HRC 63-66. With titanium coating treatment, it is reliable and durable.
- [Professional and DIY Use]- Suitable for hardened materials and hard metals, such as cast iron, hard plastics, and also suitable for soft materials. When it cannot penetrate, try to adjust the RPM.
- [Twisted design]- With a 120 angle point and twist design, it can increase the cutting speed through automatic centering; avoid displacement during the work process, and at the same time remove debris and particles faster and easier. The straight shank can be firmly fixed and accurately centered, suitable for standard drill chucks and conventional round chucks.
- [Note]- Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #8
uxcell Straight Shank Twist Drill Bits 2.5mm High Speed Steel 4341 with 2.5mm Shank 10 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D4CLHN | Model: a19102500ux0097 | PartNumber: a19102500ux0097
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 2.5mm / 0.1"; Shank Diameter : 2.5mm / 0.1"; Cutting Edge Length: 26mm / 1.02"; Total Length : 55mm / 2.17"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 5 Pcs 2mm Mini Micro Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 100mm for Aluminum Alloy
Asin: B09YR2Q41J | Model: a22022400ux0801 | PartNumber: a22022400ux0801
Extended Drill：The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 2mm / 0.08-inch, Flute Length: 60mm / 2.36-inch, Shank Diameter: 2mm / 0.08-inch, Total Length: 100mm / 3.94-inch; 5 x Mini Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Solid Carbide Drill Bits, 2mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic 2pcs
Asin: B09XDYXDQ8 | Model: a22021800ux0544 | PartNumber: a22021800ux0544
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 2mm / 0.079"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell 12pcs Jobber Drill Bits 2mm Gold Titanium Coated 4341 High Speed Steel (HSS) 135 Degree Split Point Twist Drill Bits for Stainless Steel Metal Plastic Wood
Asin: B0CKYNK1GK
Gold Titanium Finish: Premium Gold Titanium Coating Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. The Gold Finish Helps To Extend The Tool Life..
Notices: Use An Appropriate Lubricant, Make Sure The Drill Bit Is Tightened Securely, Keep The Drill Bit Perpendicular To The Work Surface, And Apply Steady Pressure To The Drill Bit. Controlling The Speed Is Very Important. Not Suitable For Tiles, Concrete, Walls, Stones..
Wide Applications: The Drill Bits Can Drill Clean And Accurate Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
4341 High Speed Steel: It Contains High Content Of Carbon And Alloy Elements, Providing Excellent Cutting Performance, High Heat Resistance, High Hardness, Wear Resistance And Durability. Good For Applications Requiring Precise And Efficient Processing..
Features
- Drill Bit Features: Cutting edge diameter: 2mm / 0.079"; round shank diameter: 2mm / 0.079"; cutting edge length: 20mm / 0.79"; overall length: 49mm / 1.93"; split point: 135 degree. Suitable for handheld drills, drilling machines, bench drills, machining centers, CNC lathes.
- 4341 High Speed Steel: It contains high content of carbon and alloy elements, providing excellent cutting performance, high heat resistance, high hardness, wear resistance and durability. Good for applications requiring precise and efficient processing.
- Gold Titanium Finish: Premium gold titanium coating can apply lubricant better for smoother drilling and are more durable and corrosion resistant. The gold finish helps to extend the tool life.
- Wide Applications: The drill bits can drill clean and accurate holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Notices: Use an appropriate lubricant, make sure the drill bit is tightened securely, keep the drill bit perpendicular to the work surface, and apply steady pressure to the drill bit. Controlling the speed is very important. NOT suitable for tiles, concrete, walls, stones.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell HSS(High Speed Steel) Extra Long Twist Drill Bits, 2mm Drill Diameter 200mm Length 2 Pcs
Asin: B09XVHLR7M | Model: a22031100ux0263 | PartNumber: a22031100ux0263
[Twisted Design]- With The Twisted Design, It Can Improve Cutting Accuracy By Centering The Tip. It Can Avoid Displacement Of The Drill Bit During Work, And At The Same Time Remove Debris And Particles Faster And Easier..
[Note]- Please Keep Cool And Gentle Using, The Working Life Of The Twist Drill Bits Can Be Largely Prolonged By Proper Usage..
[Professional And Diy Use]- Suitable For Processing Non-Ferrous Metals, Such As Copper And Aluminum, And Also Suitable For Hard Plastics. When It Cannot Penetrate, Try To Adjust The Rpm..
[Strength And Hardness]- Made Of High-Speed Steel. Hss(High Speed Steel) Enables The Drill Body Harder And Can Keep A Longer Drilling Life..
Features
- [Specifications]- Twist Drill Bits Diameter: 2mm / 0.08-inch; Drill Bit Length:150mm / 5.91-inch; Shank Diameter: 2mm / 0.08-inch; Total Length: 200mm / 7.87-inch; 2 x Straight Shank Twist Drill Bit
- [Strength and Hardness]- Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
- [Twisted Design]- With the twisted design, it can improve cutting accuracy by centering the tip. It can avoid displacement of the drill bit during work, and at the same time remove debris and particles faster and easier.
- [Professional and DIY Use]- Suitable for processing non-ferrous metals, such as copper and aluminum, and also suitable for hard plastics. When it cannot penetrate, try to adjust the RPM.
- [Note]- Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 3 Pcs H2.5 (2.5mm) Ball End Screwdriver Bits, S2 Steel Magnetic 2.6 Inch Long Drill Bit with 1/4 Inch Hex Shank
Asin: B07Z9BGY8R | Model: a19082100ux0021 | PartNumber: a19082100ux0021
[3] : ) Magnetic Tip - Magnetized Bit Tip Holds Screws Securely Before Installing And After Getting Them Out For Higher Efficiency..
[5] : ) Wide Usage - Fit For Electric Screwdrivers, Hand Screwdrivers, Electric Drills, Air Drills And So Forth. Perfect For Electrician, Mechanic And Repair Work..
[4] : ) Ball End Design - These Hex Keys Have A Ball On One End, Which Allows The Tool To Be Used At An Angle Off-Axis To The Screw..
[2] : ) Material - Made From S2 Steel Material For Ultimate Durability, Suitable For Industrial Use..
Features
- [1] : ) FEATURES - 2.5mm (H2.5) ball end bit, 1/4-Inch hex shank; 65mm (2.6-Inch) total long.
- [2] : ) MATERIAL - Made from S2 steel material for ultimate durability, suitable for industrial use.
- [3] : ) MAGNETIC TIP - Magnetized bit tip holds screws securely before installing and after getting them out for higher efficiency.
- [4] : ) BALL END DESIGN - These hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
- [5] : ) WIDE USAGE - Fit for electric screwdrivers, hand screwdrivers, electric drills, air drills and so forth. Perfect for electrician, mechanic and repair work.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 5 Pcs 2.5mm Mini Micro Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 120mm for Aluminum Alloy
Asin: B09YH85T4L | Model: a22022400ux0813 | PartNumber: a22022400ux0813
Extended Drill：The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 2.5mm / 0.1-inch, Flute Length: 72mm / 2.83-inch, Shank Diameter: 2.5mm / 0.1-inch, Total Length: 120mm / 4.72-inch; 5 x Mini Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell HSS(High Speed Steel) Extra Long Twist Drill Bits, 2mm Drill Diameter 300mm Length for Hardened Metal Woodwork Plastic Aluminum Alloy 2 Pcs
Asin: B09XVHBB5B | Model: a22031100ux0288 | PartNumber: a22031100ux0288
[Twisted Design]- With The Twisted Design, It Can Improve Cutting Accuracy By Centering The Tip. It Can Avoid Displacement Of The Drill Bit During Work, And At The Same Time Remove Debris And Particles Faster And Easier..
[Note]- Please Keep Cool And Gentle Using, The Working Life Of The Twist Drill Bits Can Be Largely Prolonged By Proper Usage..
[Professional And Diy Use]- Suitable For Processing Non-Ferrous Metals, Such As Copper And Aluminum, And Also Suitable For Hard Plastics. When It Cannot Penetrate, Try To Adjust The Rpm. Suitable For Electric Hand Drill, Bench Drill And Machine Tool Equipment..
[Strength And Hardness]- Made Of High-Speed Steel. Hss(High Speed Steel) Enables The Drill Body Harder And Can Keep A Longer Drilling Life..
Features
- [Specifications]- Twist Drill Bits Diameter: 2mm / 0.08-inch; Drill Bit Length:200mm / 7.87-inch; Shank Diameter: 2mm / 0.08-inch; Total Length: 300mm / 11.81-inch; 2 x Straight Shank Twist Drill Bit
- [Strength and Hardness]- Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
- [Twisted Design]- With the twisted design, it can improve cutting accuracy by centering the tip. It can avoid displacement of the drill bit during work, and at the same time remove debris and particles faster and easier.
- [Professional and DIY Use]- Suitable for processing non-ferrous metals, such as copper and aluminum, and also suitable for hard plastics. When it cannot penetrate, try to adjust the RPM. Suitable for electric hand drill, bench drill and machine tool equipment.
- [Note]- Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 2.5mm Dia Split Point HSS Cobalt Metric Twist Drill Bit Drilling Tool 10pcs
Asin: B06XKRB6YW | Model: US-SA-AJD-241649 | PartNumber: US-SA-AJD-241649 | Ean: 0604267653742 | UPC: 604267653742
Material: Hss, Cobalt; Flute Length: 25Mm / 1".
Fearure: Straight Shank; Color: Champagne Color.
Bit Diameter: 2.5Mm; Weight: 28G.
Product Name: Twist Drill Bit; Package Content: 10Pcs X Twist Drill Bit.
Features
- Total Length: 58mm / 2.3"; Shank Diameter: 2.5mm
- Product Name: Twist Drill Bit; Package Content: 10pcs x Twist Drill Bit
- Material: HSS, Cobalt; Flute Length: 25mm / 1
- Bit Diameter: 2.5mm; Weight: 28g
- Fearure: Straight Shank; Color: Champagne Color
- See more on Amazon...
Brand: sourcing map | Manufacturer: uxcell
Dimensions: 0.39 x 3.15 x 1.97 inches | Weight: 0.00 Pounds
See On Amazon #17
uxcell 2 Pcs High Speed Steel Hex Shank Twist Drill Bit, 2.5mm Drilling Dia with 1/4 Inch Hex Shank 75mm Length
Asin: B09YV18FBH | Model: a22032200ux1021 | PartNumber: a22032200ux1021
135-Degree Split Point Tip Design: Can Drill With Less Force And Good Radial Stability. Easier Chip Evacuation, Better Heat Dissipation And Increased Drill Durability..
Quick Change: Compared With The Ordinary Drill, With A Quick Change Hexagonal Handle, Handle Diameter 6.35Mm (1/4 "), Fixture Is More Stable, More Convenient To Replace..
Application: Suitable For Drilling Holes In Alloy Steel, Wood, Nonferrous Metal, Cast Iron And Hard Plastics.
Material: Made Of High Speed Steel With Gold Titanium For Better Lubrication, Smoother Drilling. Increase The Hardness Of The Drill, With Good Wear Resistance And Durability..
Features
- Specification: Shank: 1/4-inch Hex; Drill Diameter: 2.5mm / 0.1-inch; Total Length: 75mm / 2.95-inch; Drill Bit Length: 22mm / 0.87-inch; 2 x Twist Drill Bits
- Material: Made of high speed steel with gold titanium for better lubrication, smoother drilling. Increase the hardness of the drill, with good wear resistance and durability.
- 135-degree Split Point Tip Design: Can drill with less force and good radial stability. Easier chip evacuation, better heat dissipation and increased drill durability.
- Application: Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics
- Quick Change: Compared with the ordinary drill, with a quick change hexagonal handle, handle diameter 6.35mm (1/4 ), fixture is more stable, more convenient to replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell PCB Drill Bits 2mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 5 Pcs
Asin: B07ZWC7ZSD | Model: a19091500ux0204 | PartNumber: a19091500ux0204
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 2mm; cutting edge length: 12mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #19
uxcell 1/4" Quick Change Shank 2mm Magnetic Hex Screwdriver Bits 50mm Length 10pcs
Asin: B00EDK5BUM | Model: a13061700ux0331 | PartNumber: a13061700ux0331 | Ean: 0700955713207 | UPC: 700955713207
Main Color: Gray; Features: Magnetic.
Package Content : 10 X Screwdriver Bits; Hex Shank Diameter: 6.3Mm/1/4".
Head Size : 2Mm/0.78".
Weight : 80G; Total Length: 50Mm/ 2".
Features
- Product Name : Screwdriver Bit;Features : Hex Head, Hex Shank;Material : Metal
- Weight : 80g; Total Length: 50mm/ 2
- Main Color: Gray; Features: Magnetic
- Head Size : 2mm/0.78
- Package Content : 10 x Screwdriver Bits; Hex Shank Diameter: 6.3mm/1/4
- See more on Amazon...
First Available: 08/20/2018
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.15 x 2.76 inches
See On Amazon #20
uxcell PCB Drill Bits 2mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 10 Pcs
Asin: B07ZWHFZXR | Model: a19091500ux0205 | PartNumber: a19091500ux0205
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 2mm; cutting edge length: 10.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search