uxcell 7mm Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 200mm Length for Wood Plastic Aluminum
Asin: B0B1Q835LP | Model: a22040100ux0139 | PartNumber: a22040100ux0139
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Extended Drill：The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 7mm / 0.28-inch; Flute Length: 135mm / 5.31-inch; Shank Diameter: 7mm / 0.28-inch; Total Length: 200mm / 7.87-inch; 1 x Lengthened Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 7mm Twist Drill Bits
#1
uxcell Straight Shank Twist Drill Bits 7mm High Speed Steel 4341 with 7mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D4KMH3 | Model: a19102500ux0124 | PartNumber: a19102500ux0124
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 7mm / 0.28"; Shank Diameter : 7mm / 0.28"; Cutting Edge Length: 70mm / 2.76"; Total Length : 110mm / 4.33"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell 2 Pcs High Speed Steel Hex Shank Twist Drill Bit, 7mm Drilling Dia with 1/4 Inch Hex Shank 105mm Length
Asin: B09YV1JBGC | Model: a22032200ux1060 | PartNumber: a22032200ux1060
135-Degree Split Point Tip Design: Can Drill With Less Force And Good Radial Stability. Easier Chip Evacuation, Better Heat Dissipation And Increased Drill Durability..
Quick Change: Compared With The Ordinary Drill, With A Quick Change Hexagonal Handle, Handle Diameter 6.35Mm (1/4 "), Fixture Is More Stable, More Convenient To Replace..
Application: Suitable For Drilling Holes In Alloy Steel, Wood, Nonferrous Metal, Cast Iron And Hard Plastics.
Material: Made Of High Speed Steel With Dual Coating Of Gold Titanium And Black Nitride For Better Lubrication, Smoother Drilling. Increase The Hardness Of The Drill, With Good Wear Resistance And Durability..
Features
- Specification: Shank: 1/4-inch Hex; Drill Diameter: 7mm / 0.28-inch; Total Length: 105mm / 4.13-inch; Drill Bit Length: 67mm / 2.64-inch; 2 x Twist Drill Bits
- Material: Made of high speed steel with dual coating of gold titanium and black nitride for better lubrication, smoother drilling. Increase the hardness of the drill, with good wear resistance and durability.
- 135-degree Split Point Tip Design: Can drill with less force and good radial stability. Easier chip evacuation, better heat dissipation and increased drill durability.
- Application: Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics
- Quick Change: Compared with the ordinary drill, with a quick change hexagonal handle, handle diameter 6.35mm (1/4 ), fixture is more stable, more convenient to replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Straight Shank Twist Drill Bits 7mm High Speed Steel 4341 with 7mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CYMSVC | Model: a19102500ux0125 | PartNumber: a19102500ux0125
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 7mm / 0.28"; Shank Diameter : 7mm / 0.28"; Cutting Edge Length: 70mm / 2.76"; Total Length : 110mm / 4.33"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #4
uxcell Adjustable Ratchet Tap Wrench T-Handle, for Metric M3-M8 Thread Taps, Ratcheting T Handle Holder Reamer Hand Tapping Tool for Machinist Repair, 250mm ((9.84-inch) Body
Asin: B07MV4BWSK | Model: a18111600ux0212 | PartNumber: a18111600ux0212
Easy To Use: The Ratchet Tap Wrench Can Be Operated With One Hand, And Easily Switched From Right-Handed Tapping To Left-Handed Tapping, Or Locked For Non-Ratcheting Use. Easy To Use Even In Narrow Space..
Tips: The T-Handle Can Be Detached. It Also Can Be Slipped From Side To Side For Positioning Convenience, And Added Leverage In Tight Places..
Features: T-Handle Ratcheting Tap Wrenches Provide Quick And Efficient Ratcheting Action. The Diamond-Shaped Head Has A Beautiful And Practical Anti-Skid Design.
Applications: T Handle Tap Holder Is Used For Hand Tapping Taps, And Also Can Be Used With Drills, Reamers, Screw Extractors And Other Small Tools That Need To Be Rotated Manually..
Features
- Tap Wrench: Fit tap size: M3-M8 (Mertic)/ 2mm-9mm, 250mm (9.84-inch) body length. Steel jaws and knurled chuck provide secure and firm grips on hex or square drives
- Applications: T handle tap holder is used for hand tapping taps, and also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
- Easy To Use: The ratchet tap wrench can be operated with one hand, and easily switched from right-handed tapping to left-handed tapping, or locked for non-ratcheting use. Easy to use even in narrow space.
- Features: T-handle ratcheting tap wrenches provide quick and efficient ratcheting action. The diamond-shaped head has a beautiful and practical anti-skid design
- Tips: The T-handle can be detached. It also can be slipped from side to side for positioning convenience, and added leverage in tight places.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 5.91 x 2.36 inches
See On Amazon #5
uxcell HSS(High Speed Steel) Extra Long Twist Drill Bits, 7mm Drill Diameter 200mm Length for Hardened Metal Woodwork Plastic Aluminum Alloy 2 Pcs
Asin: B09XVG8PG9 | Model: a22031100ux0300 | PartNumber: a22031100ux0300
[Twisted Design]- With The Twisted Design, It Can Improve Cutting Accuracy By Centering The Tip. It Can Avoid Displacement Of The Drill Bit During Work, And At The Same Time Remove Debris And Particles Faster And Easier..
[Note]- Please Keep Cool And Gentle Using, The Working Life Of The Twist Drill Bits Can Be Largely Prolonged By Proper Usage..
[Professional And Diy Use]- Suitable For Processing Non-Ferrous Metals, Such As Copper And Aluminum, And Also Suitable For Hard Plastics. When It Cannot Penetrate, Try To Adjust The Rpm..
[Strength And Hardness]- Made Of High-Speed Steel. Hss(High Speed Steel) Enables The Drill Body Harder And Can Keep A Longer Drilling Life..
Features
- [Specifications]- Twist Drill Bits Diameter: 7mm / 0.28-inch; Drill Bit Length:155mm / 6.1-inch; Shank Diameter: 7mm / 0.28-inch; Total Length: 200mm / 7.87-inch; 2 x Straight Shank Twist Drill Bit
- [Strength and Hardness]- Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
- [Twisted Design]- With the twisted design, it can improve cutting accuracy by centering the tip. It can avoid displacement of the drill bit during work, and at the same time remove debris and particles faster and easier.
- [Professional and DIY Use]- Suitable for processing non-ferrous metals, such as copper and aluminum, and also suitable for hard plastics. When it cannot penetrate, try to adjust the RPM.
- [Note]- Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Tap and Drill Bit Set, 1/8-27 NPT Thread Tap & 21/64" Black Oxide Twist Drill Bit, Straight Flute Tap Tapping Threading Repair Tool Kit
Asin: B0CSFF5FKH
Features: Black Oxide Coating On Drill Bits Improves Durability, Corrosion Resistance And Lubricity, And Helps Reduce Friction And Heat, Extending Tool Life. Twist Drill Bit Has Sharp Cutting Edges And Large Spiral Grooves, Which Provide Neat And Smooth Cuts And Facilitate The Export Of Metal Chips..
Tips: Drill Holes With A Twist Drill Bit First, Then Tap With A Thread Tap. Tapping And Drilling Angle Should Be 90 Degrees Vertical And Stable. The Higher The Hardness, The Slower The Speed. The Tapping Depth Should Not Exceed 1.5 Times The Diameter Of The Tap (For Example, The Diameter M5x0.8 Is About 5Mm, And The Depth Should Not Exceed 7.5Mm.).
Easy To Use: Machine Taps Are Used In Drill Presses, Tapping, Cnc And Milling Machines. Use With Appropriate Lubricant (Such As Cutting Fluid Or Oil) To Get Higher Quality Threads And More Durable Tap & Drill Bit. Not Recommended For Hand Use And Electric Drill Tapping..
Wide Applications: Create New Threads Or Re-Thread Damaged Or Jammed Threads. Thread Tap Can Process Through Holes Or Shallow Blind Holes, With Downward Chip Removal, Right-Hand Cutting, And Fast And Accurate Tapping. Suitable For Most Metals, Cast Iron, Aluminum, Stainless Steel, Aluminum Alloy, Bronze And Hard Plastics..
Features
- Tap and Drill Bit Set: Tap thread size: 1/8-27 NPT; drill bit size: 8.3mm / 21/64". 6542 (M2) high speed steel tap and drill bit set offers excellent heat resistance and hardness for durability and longevity, and good cutting performance.
- Wide Applications: Create new threads or re-thread damaged or jammed threads. Thread tap can process through holes or shallow blind holes, with downward chip removal, right-hand cutting, and fast and accurate tapping. Suitable for most metals, cast iron, aluminum, stainless steel, aluminum alloy, bronze and hard plastics.
- Features: Black oxide coating on drill bits improves durability, corrosion resistance and lubricity, and helps reduce friction and heat, extending tool life. Twist drill bit has sharp cutting edges and large spiral grooves, which provide neat and smooth cuts and facilitate the export of metal chips.
- Easy to Use: Machine taps are used in drill presses, tapping, CNC and milling machines. Use with appropriate lubricant (such as cutting fluid or oil) to get higher quality threads and more durable tap & drill bit. Not recommended for hand use and electric drill tapping.
- Tips: Drill holes with a twist drill bit first, then tap with a thread tap. Tapping and drilling angle should be 90 degrees vertical and stable. The higher the hardness, the slower the speed. The tapping depth should not exceed 1.5 times the diameter of the tap (for example, the diameter M5x0.8 is about 5mm, and the depth should not exceed 7.5mm.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell Tap & Bit Sets, M12 x 1.5 H2 Straight Flute Machine Thread Milling Tap, 10.5mm M35 Cobalt High Speed Steel (HSS-CO) Twist Drill Bit
Asin: B0BNXNY63S | Model: a22080200ux0642 | PartNumber: a22080200ux0642
Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. M35 5% Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Thread Tap: Straight Flute Design, Downward Chip Removal, Fast Tapping With Accuracy. Suitable For Processing Through Holes Or Shallow Holes. For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics. Provides High Hardness And Toughness For Wear Resistance..
Features
- Tap & Bit Sets: Tap size: thread size: M12 x 1.5; accuracy: H2; total length: 89mm / 3.5". Drill bit size: cutting edge diameter: 10.5mm / 0.413"; total length: 133mm / 5.24".
- Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance.
- Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance.
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 6.7mm Drilling Dia Straight Shank HSS Cobalt Metric Twist Drill Bit 3pcs
Asin: B06XKWJDY8 | Model: a17011600ux0375 | PartNumber: a17011600ux0375 | Ean: 0604267654633 | UPC: 604267654633
Material: Hss, Cobalt; Flute Length: 55Mm / 2.2".
Fearure: Straight Shank; Color: Champagne Color.
Bit Diameter: 6.7Mm; Weight: 61G.
Product Name: Twist Drill Bit; Package Content: 3Pcs X Twist Drill Bit.
Features
- Total Length: 100mm / 4"; Shank Diameter: 6.7mm
- Product Name: Twist Drill Bit; Package Content: 3pcs x Twist Drill Bit
- Material: HSS, Cobalt; Flute Length: 55mm / 2.2
- Bit Diameter: 6.7mm; Weight: 61g
- Fearure: Straight Shank; Color: Champagne Color
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.15 pounds
See On Amazon #9
uxcell High Speed Steel Hex Shank Twist Drill Bit, 7mm Drilling Dia with 1/4 Inch Hex Shank 105mm Length
Asin: B09YTZBL98 | Model: a22032200ux1059 | PartNumber: a22032200ux1059
135-Degree Split Point Tip Design: Can Drill With Less Force And Good Radial Stability. Easier Chip Evacuation, Better Heat Dissipation And Increased Drill Durability..
Quick Change: Compared With The Ordinary Drill, With A Quick Change Hexagonal Handle, Handle Diameter 6.35Mm (1/4 "), Fixture Is More Stable, More Convenient To Replace..
Application: Suitable For Drilling Holes In Alloy Steel, Wood, Nonferrous Metal, Cast Iron And Hard Plastics.
Material: Made Of High Speed Steel With Dual Coating Of Gold Titanium And Black Nitride For Better Lubrication, Smoother Drilling. Increase The Hardness Of The Drill, With Good Wear Resistance And Durability..
Features
- Specification: Shank: 1/4-inch Hex; Drill Diameter: 7mm / 0.28-inch; Total Length: 105mm / 4.13-inch; Drill Bit Length: 67mm / 2.64-inch; 1 x Twist Drill Bits
- Material: Made of high speed steel with dual coating of gold titanium and black nitride for better lubrication, smoother drilling. Increase the hardness of the drill, with good wear resistance and durability.
- 135-degree Split Point Tip Design: Can drill with less force and good radial stability. Easier chip evacuation, better heat dissipation and increased drill durability.
- Application: Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics
- Quick Change: Compared with the ordinary drill, with a quick change hexagonal handle, handle diameter 6.35mm (1/4 ), fixture is more stable, more convenient to replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 0.55mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs
Asin: B085NVDYDN | Model: a19120900ux0781 | PartNumber: a19120900ux0781
For Abrasive Materials: Designed For Drilling Abrasive Materials When Drilling Accuracy Must Be Maintained. Can Be Used In High Temperature Drilling Applications.
Please Note: Must Be Used With A Rigid Tool-Holding Systems. Fine Grinding Drill Obtain Accuracy And Fine Finish Than Other Substrates.
Solid Carbide Tool: Offering Long Tool Life And Faster Cutting Speeds Than Other Substrates, But Is More Brittle.
Applications: Widely Used On Cast Iron, Non-Ferrous Alloys, High Silicon Aluminum, Copper, Plastics, Hard Rubber Etc..
Features
- Specification: Diameter: 0.55mm / 0.02"; Full Length: 33mm / 1.3"; Flute Length: 7mm / 0.28"; Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC
- Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc.
- For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications
- Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle
- Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Metric Thread Tap M12 x 1.25 H2 200mm Extra Long Straight Flute Screw Thread Milling Machine Taps Threading Tapping Repair Tool
Asin: B0CWPDQC46
Wide Applications: Thread Taps Create New Threads Or Re-Thread Damaged Or Jammed Threads. Widely Used For Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel. Add Proper Tapping Oil For Higher Quality Threads And More Durable Taps..
Tips: Machine Taps Are Used With Tapping, Drilling, Automatic Or Milling Machines. Drill The Holes With A Twist Drill Bit First, Then Tap With A Thread Tap. The Tapping Angle Should Be 90 Degrees Vertical And Stable. Not Recommended For Hand And Electric Drill Tapping..
6542 High Speed Steel Tap: Offer High Hardness, Good Toughness, Wear Resistance, And Excellent Cutting Performance. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, Great For A Wide Range Of Applications..
Straight Flute Tap: Straight Flute Design, Clear Threads Without Burrs, Right Hand Tapping Direction. Provides Rapid Downward Chip Removal To Achieve Efficient Thread Cutting, Suitable For Processing Through Holes Or Shallow Holes..
Features
- Metric Thread Tap: Thread size: M12 x 1.25 (right hand); accuracy: H2; total length: 200mm / 8" (extra long); square shank width: 7mm / 0.28"; thread length: 25mm / 0.98"; number of chip flutes: 4 flutes
- Straight Flute Tap: Straight flute design, clear threads without burrs, right hand tapping direction. Provides rapid downward chip removal to achieve efficient thread cutting, suitable for processing through holes or shallow holes.
- Wide Applications: Thread taps create new threads or re-thread damaged or jammed threads. Widely used for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel. Add proper tapping oil for higher quality threads and more durable taps.
- 6542 High Speed Steel Tap: Offer high hardness, good toughness, wear resistance, and excellent cutting performance. Uncoated taps feature just the base substrate without any additional coatings, great for a wide range of applications.
- Tips: Machine taps are used with tapping, drilling, automatic or milling machines. Drill the holes with a twist drill bit first, then tap with a thread tap. The tapping angle should be 90 degrees vertical and stable. NOT recommended for hand and electric drill tapping.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Straight Shank Twist Drill Bits 7.5mm High Speed Steel 4341 with 7.5mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D1V8KB | Model: a19102500ux0127 | PartNumber: a19102500ux0127
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 7.5mm / 0.3"; Shank Diameter : 7.5mm / 0.3"; Cutting Edge Length: 70mm / 2.76"; Total Length : 110mm / 4.33"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Tap and Die and Drill Bit Set, M6 x 1 Left Hand Thread Milling Tap and Round Die, 5.0mm Cobalt High Speed Steel Twist Drill Bit
Asin: B0B7D2K734 | Model: a22042200ux1106 | PartNumber: a22042200ux1106
Round Die: The Round Die Features Good Abrasion Resistance. Used With Die Wrench (Not Included). The Fastening Screws In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Suitable Lubricating Oil Should Be Added To The Cutting Edge..
Tips: Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min. The Torque Caused By Too Fast Feed Speed Is Too Large, Which Can Easily Cause The Tap To Break..
5.0Mm Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. M35 Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance. Specially Used For Drilling Stainless Steel..
Thread Tap: Straight Flute Design, Downward Chip Removal. Process Through Holes In Maintenance And Repair Work. For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics Etc.. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Features
- Compatibility: M6 x 1 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications.
- Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps.
- Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge.
- 5.0mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel.
- Tips: Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #14
uxcell 17mm Reduced Shank Cemented Carbide Twist Drill Bits for Hardened Steel Stainless Steel, 1/2 Inch Straight Shank
Asin: B09X9LCX6Z | Model: a22021600ux0368 | PartNumber: a22021600ux0368
[Versatile Uses] -Cemented Carbide Drill Bit Can Clean, Accurate Holes In Sheet Metal, Steel, Copper, Brass, Aluminum, Plastic, Wood, Stainless Steel And Cast Iron..
[Use Note] - Please Use Low Speed When Drilling And Note The Temperature Of Carbide Tip Is Not Too High For Extending Drill Bit Life..
[Reduced Shank] - Reduced Shank Twist Drill Bit Can Work With A Electric Drill (Electric Drill Not Included)..
[Features] - Milled U-Flutes With Deep-Cut Spiral Deliver Fast Material Removal. Suitable For Drilling In Tough Metal, Including Abrasive Alloy And Hardened Steel..
Features
- [Cemented Carbide] - Twist drill bits are made of cemented carbide tip for easier drilling into any hard objects, long service life, it is more sharp and durable than others.
- [Features] - Milled U-flutes with deep-cut spiral deliver fast material removal. Suitable for drilling in tough metal, including abrasive alloy and hardened steel.
- [Versatile Uses] -Cemented carbide drill bit can clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
- [Reduced Shank] - Reduced shank twist drill bit can work with a electric drill (electric drill not included).
- [Use Note] - Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell High Speed Steel Straight Shank Twist Drill Bit Fully Ground Titanium Coated 7.8mm Drill Diameter 117mm Total Length 64mm Drill Bit Length
Asin: B099JMCBS8 | Model: a21013000ux0328 | PartNumber: a21013000ux0328
[Professional And Diy Use]- Suitable For Hardened Materials And Hard Metals, Such As Cast Iron, Hard Plastics, And Also Suitable For Soft Materials. When It Cannot Penetrate, Try To Adjust The Rpm..
[Note]- Please Keep Cool And Gentle Using, The Working Life Of The Twist Drill Bits Can Be Largely Prolonged By Proper Usage.
[Twisted Design]- With A 120° Angle Point And Twist Design, It Can Increase The Cutting Speed Through Automatic Centering; Avoid Displacement During The Work Process, And At The Same Time Remove Debris And Particles Faster And Easier. The Straight Shank Can Be Firmly Fixed And Accurately Centered, Suitable For Standard Drill Chucks And Conventional Round Chucks..
[Strength And Hardness]- Made Of High-Speed 6542 Steel, Rock Wall Hardness Grade Hrc 63-66. With Titanium Coating Treatment, It Is Reliable And Durable..
Features
- [Package content]- 1 Pcs 7.8mm Drill Dia High Speed Steel straight shank twist drills.
- [Strength and Hardness]- Made of high-speed 6542 steel, rock wall hardness grade HRC 63-66. With titanium coating treatment, it is reliable and durable.
- [Professional and DIY use]- Suitable for hardened materials and hard metals, such as cast iron, hard plastics, and also suitable for soft materials. When it cannot penetrate, try to adjust the RPM.
- [Twisted Design]- With a 120 angle point and twist design, it can increase the cutting speed through automatic centering; avoid displacement during the work process, and at the same time remove debris and particles faster and easier. The straight shank can be firmly fixed and accurately centered, suitable for standard drill chucks and conventional round chucks.
- [Note]- Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 7mm Cutting Dia Cemented Carbide Twist Extra Long Drill Bit with Round Straight Shank for Hardened Steel Stainless Steel, 130mm Length
Asin: B0B5DT6LHV | Model: a22042900ux0236 | PartNumber: a22042900ux0236
[Versatile Uses] -Cemented Carbide Drill Bit Can Drill Holes In Stainless Steel, Die Steel, Titanium Alloy, Cast Steel, Iron, Aluminum Alloy And Copper..
[Use Note] - Please Use Low Speed When Drilling And Note The Temperature Of Carbide Tip Is Not Too High For Extending Drill Bit Life..
[Round Shank] - Straight Round Shank Twist Drill Bit Can Work With An Electric Drill (Electric Drill Not Included)..
[Features] - Milled U-Flutes With Deep-Cut Spiral Deliver Fast Material Removal. Suitable For Drilling In Tough Metal, Including Abrasive Alloy And Hardened Steel..
Features
- [Cemented Carbide] - Twist drill bits are made of cemented carbide tip for easier drilling into any hard objects, long service life, it is more sharp and durable than others.
- [Features] - Milled U-flutes with deep-cut spiral deliver fast material removal. Suitable for drilling in tough metal, including abrasive alloy and hardened steel.
- [Versatile Uses] -Cemented carbide drill bit can drill holes in stainless steel, die steel, titanium alloy, cast steel, iron, aluminum alloy and copper.
- [Round Shank] - Straight round shank twist drill bit can work with an electric drill (electric drill not included).
- [Use Note] - Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell M7 x 1 Straight Flute Thread Tap and 6.0mm Twist Drill Bit Set, Metric Titanium Plated 6542 High Speed Steel Machine Screw Thread Tap Threading Drilling Tool
Asin: B09TVKSK6S | Model: a22010500ux0475 | PartNumber: a22010500ux0475
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Titanium Coating Provides Excellent Corrosion Resistance And Improves Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Straight Flute Tap: Straight Flute Design, Downward Chip Removal. Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Through Holes. For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics.
Features
- Tap and Drill Bit: Tap thread size: M7 x 1, drill bit diameter: 6mm / 0.24". High-speed steel tool has high hardness and toughness for wear resistance.
- Straight Flute Tap: Straight flute design, downward chip removal. Right hand thread cutting, fast tapping with accuracy. Suitable for processing through holes. For drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Titanium coating provides excellent corrosion resistance and improves wear resistance.
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #18
uxcell Brad Point Drill Bits for Wood 7mm x 68mm Right Turning Carbide for Woodworking Carpentry Drilling Tool
Asin: B07MX7WNNQ | Model: a18121200ux0495 | PartNumber: a18121200ux0495
Beveled Edge Leads To Clean Drilling Of The Diameter Without Any Deviation..
The Brad Point Drill Bit Is Suitable For Drilling Hardboard, Plywood, Chipboard And All Natural Hard And Softwood..
The Optimized Spiral Design Enables Better Guidance Of The Drill From Start To Finish..
Shank Diameter: 10Mm/0.39"; Drilling Depth: 40Mm/1.57"; Turning: Right / Forward.
Features
- Drilling Diameter: 7mm/0.28"; Total Length: 68mm/2.68"
- Shank Diameter: 10mm/0.39; Drilling Depth: 40mm/1.57; Turning: Right / Forward
- Beveled edge leads to clean drilling of the diameter without any deviation.
- The optimized spiral design enables better guidance of the drill from start to finish.
- The brad point drill bit is suitable for drilling hardboard, plywood, chipboard and all natural hard and softwood.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 3.35 x 0.79 inches
See On Amazon #19
uxcell M8 x 1 Straight Flute Thread Tap and 7.0mm Twist Drill Bit Set, Metric Titanium Plated 6542 High Speed Steel Machine Screw Thread Tap Threading Drilling Tool
Asin: B09TVH6KCG | Model: a22010500ux0477 | PartNumber: a22010500ux0477
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Titanium Coating Provides Excellent Corrosion Resistance And Improves Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Straight Flute Tap: Straight Flute Design, Downward Chip Removal. Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Through Holes. For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics.
Features
- Tap and Drill Bit: Tap thread size: M8 x 1, drill bit diameter: 7mm / 0.28". High-speed steel tool has high hardness and toughness for wear resistance.
- Straight Flute Tap: Straight flute design, downward chip removal. Right hand thread cutting, fast tapping with accuracy. Suitable for processing through holes. For drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Titanium coating provides excellent corrosion resistance and improves wear resistance.
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search