uxcell 12mm Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 250mm Length for Wood Plastic Aluminum
Asin: B0B1Q8C1T5 | Model: a22040100ux0176 | PartNumber: a22040100ux0176
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Extended Drill：The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 12mm / 0.47-inch; Flute Length: 155mm / 6.1-inch; Shank Diameter: 12mm / 0.47-inch; Total Length: 250mm / 9.84-inch; 1 x Lengthened Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 12mm Twist Drill Bits
#1
uxcell Straight Shank Twist Drill Bits 12mm High Speed Steel 4341 with 12mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D9FLX6 | Model: a19102500ux0144 | PartNumber: a19102500ux0144
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 12mm / 0.47"; Shank Diameter : 12mm / 0.47"; Cutting Edge Length: 102mm / 4.02"; Total Length : 150mm / 5.91"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #2
uxcell Straight Shank Twist Drill Bits 12mm High Speed Steel 4341 with 12mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D6HRKD | Model: a19102500ux0145 | PartNumber: a19102500ux0145
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 12mm / 0.47"; Shank Diameter : 12mm / 0.47"; Cutting Edge Length: 102mm / 4.02"; Total Length : 150mm / 5.91"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell PCB Drill Bits 1.1mm-2.0mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVSJZXN | Model: a19091500ux0224 | PartNumber: a19091500ux0224
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm; Cutting Edge Length: 10.5mm, 10.5mm, 12mm, 10.5mm, 12mm, 10.5mm, 12mm, 12mm, 12mm, 12mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell Reduced Shank Twist Drill Bits 12mm High Speed Steel 6542 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CYCRDY | Model: a19102500ux0077 | PartNumber: a19102500ux0077
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 12mm / 0.47"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 63mm / 2.48"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #5
uxcell Straight Shank Twist Drill Bits 11.5mm High Speed Steel 4341 with 11.5mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082DBGTWQ | Model: a19102500ux0142 | PartNumber: a19102500ux0142
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 11.5mm / 0.45"; Shank Diameter : 11.5mm / 0.45"; Cutting Edge Length: 98mm / 3.86"; Total Length : 140mm / 5.51"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 12pcs Jobber Drill Bits 4mm (0.157") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Asin: B0CN9H3R1N
Black & Gold Finish: Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
Tips: Use An Appropriate Lubricant To Reduce Friction And Heat Build-Up. Controlling The Speed Is Very Important, Recommended Speed: 100-800Rpm/Min. The Larger The Diameter, The Slower The Speed Required. If The Hole Is Larger Than 6Mm, First Drill A Small Hole With A 3.2Mm-4Mm Drill Bit, And Then Use A Larger Drill Bit To Enlarge The Hole..
Wide Applications: Drill Bits Produce Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Most Suitable For Drilling Metals With A Hardness Less Than Hrc38, And Cannot Drill Quenched Metals, Tiles, Concrete, Walls, Stones..
M2 High Speed Steel: M2 High Speed Steel (Hrc64-66) Drill Bits Offer Excellent Heat Resistance And Hardness For Durability And Longevity, As Well As Good Cutting Performance And Accuracy For Clean, Precise Holes With Minimal Burrs..
Features
- Twist Drill Bits: Cutting edge diameter: 4mm / 0.157"; round shank diameter: 4mm / 0.157"; cutting edge length: 43mm / 1.69"; overall length: 71mm / 2.8"; split point: 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
- M2 High Speed Steel: M2 high speed steel (HRC64-66) drill bits offer excellent heat resistance and hardness for durability and longevity, as well as good cutting performance and accuracy for clean, precise holes with minimal burrs.
- Black & Gold Finish: Black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Wide Applications: Drill bits produce holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Most suitable for drilling metals with a hardness less than HRC38, and cannot drill quenched metals, tiles, concrete, walls, stones.
- Tips: Use an appropriate lubricant to reduce friction and heat build-up. Controlling the speed is very important, recommended speed: 100-800rpm/min. The larger the diameter, the slower the speed required. If the hole is larger than 6mm, first drill a small hole with a 3.2mm-4mm drill bit, and then use a larger drill bit to enlarge the hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 3pcs Tap and Die Set, Metric M12 x 1.75 Thread Taps & Round Die, Tapping Threading Tool Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0CWL6XYRT
Features: Tap & Die With Clear Threads Without Burrs, Right Hand Tapping Direction. Thread Die Designed With Conical Lock Hole, Strong Locking Force And No Loosening. Uncoated Tools Feature Just The Base Substrate, Great For A Wide Range Of Applications..
How To Use: Die Is Used With Die Stock Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened .Machine Tap Is Used In Drill Presses, Tapping, Cnc And Milling Machines. Apply Appropriate Cutting Lubricant Or Oil For Higher Quality Threads And More Durable Tools..
Reliable Material: M2 (6542) High-Speed Steel Taps Offer High Hardness, Good Toughness, Wear Resistance, And Excellent Cutting Performance. 9Sicr Alloy Tool Steel Die Provides Excellent Hardness, Toughness And Wear Resistance For Durability..
Widely Used: Accurately Cut, Repair Or Clean Threads. Straight Flute Tap Process Through Or Shallow Blind Holes And Remove Chips Downward. Die Is Suitable For Threads On Rods, Bolts, Screws, Pipes And Shafts, Or Just Remove Bolts And Threaded Rods. Great For Most Metals, Iron, Copper, Zinc, Alloy Steel, Abrasive Steel, Stainless Steel, Etc...
Features
- Metric Tap and Die Set: Thread size: M12 x 1.75 (right hand); tap total length: 88mm / 3.46"; tap thread length: 29mm / 1.14"; tap square shank width: 7mm / 0.28"; tap accuracy: H2; die outside diameter: 38mm / 1.5"; die thickness: 14mm / 0.55"
- Widely Used: Accurately cut, repair or clean threads. Straight flute tap process through or shallow blind holes and remove chips downward. Die is suitable for threads on rods, bolts, screws, pipes and shafts, or just remove bolts and threaded rods. Great for most metals, iron, copper, zinc, alloy steel, abrasive steel, stainless steel, etc..
- Features: Tap & die with clear threads without burrs, right hand tapping direction. Thread die designed with conical lock hole, strong locking force and no loosening. Uncoated tools feature just the base substrate, great for a wide range of applications.
- Reliable Material: M2 (6542) high-speed steel taps offer high hardness, good toughness, wear resistance, and excellent cutting performance. 9SiCr alloy tool steel die provides excellent hardness, toughness and wear resistance for durability.
- How to Use: Die is used with die stock wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened .Machine tap is used in drill presses, tapping, CNC and milling machines. Apply appropriate cutting lubricant or oil for higher quality threads and more durable tools.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 12mm Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 304mm Length for Wood Plastic Aluminum
Asin: B0B1Q7F7Y4 | Model: a22040100ux0182 | PartNumber: a22040100ux0182
Extended Drill：The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 12mm / 0.47-inch; Flute Length: 183mm / 7.2-inch; Shank Diameter: 12mm / 0.47-inch; Total Length: 304mm / 11.97-inch; 1 x Lengthened Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Straight Shank Twist Drill Bits 12.5mm High Speed Steel 4341 with 12.5mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D94LBK | Model: a19102500ux0147 | PartNumber: a19102500ux0147
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 12.5mm / 0.49"; Shank Diameter : 12.5mm / 0.49"; Cutting Edge Length: 102mm / 4.02"; Total Length : 150mm / 5.91"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #10
uxcell High Speed Steel Hex Shank Twist Drill Bit, 12mm Drilling Dia with 1/4 Inch Hex Shank 150mm Length
Asin: B09YTYJ8WB | Model: a22032200ux1082 | PartNumber: a22032200ux1082
135-Degree Split Point Tip Design: Can Drill With Less Force And Good Radial Stability. Easier Chip Evacuation, Better Heat Dissipation And Increased Drill Durability..
Quick Change: Compared With The Ordinary Drill, With A Quick Change Hexagonal Handle, Handle Diameter 6.35Mm (1/4 "), Fixture Is More Stable, More Convenient To Replace..
Application: Suitable For Drilling Holes In Alloy Steel, Wood, Nonferrous Metal, Cast Iron And Hard Plastics.
Material: Made Of High Speed Steel With Dual Coating Of Gold Titanium And Black Nitride For Better Lubrication, Smoother Drilling. Increase The Hardness Of The Drill, With Good Wear Resistance And Durability..
Features
- Specification: Shank: 1/4-inch Hex; Drill Diameter: 12mm / 0.47-inch; Total Length: 150mm / 5.91-inch; Drill Bit Length: 100mm / 3.94-inch; 1 x Twist Drill Bits
- Material: Made of high speed steel with dual coating of gold titanium and black nitride for better lubrication, smoother drilling. Increase the hardness of the drill, with good wear resistance and durability.
- 135-degree Split Point Tip Design: Can drill with less force and good radial stability. Easier chip evacuation, better heat dissipation and increased drill durability.
- Application: Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics
- Quick Change: Compared with the ordinary drill, with a quick change hexagonal handle, handle diameter 6.35mm (1/4 ), fixture is more stable, more convenient to replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search