NANPU Zinc Alloy 3 Stage Air System - Particulate Filter, Coalescing Filter, Desiccant Dryer & Air Regulator, Poly Bowl, Manual Drain, Mid Flow, Suitable for Paint Spray & Plasma Cutter (1/2" NPT)
Asin: B0B1YPHN2V | Ean: 6974435090506
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Stage 2: Coalescing Filter】The Coalescing Filter Is Equipped With A 0.01 Micron Element That Can Remove 99.9% Of Moisture, Smaller Particles And Oil, Which Pass Through Stage 1 Combo. When The Filter Element Needs To Be Replaced, The Red Indicator Will Pop Up..
【Accessories】2 X 5 Micron Element(One Of Them Is Installed In The Product), 2 X 0.01 Micron Element (Same As Above), 2X 3.5Oz (100G) Desiccant Beads Bag. 2 X 1/2" Npt Fittings, A Pair Of 1/2" Npt Brass Air Coupler＆ Plug Kit,1 X Thread Seal Tape..
【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer Allows The Air To Be Thoroughly Dried And Cleaned Before It Enters Your Pneumatic Tools. The Desiccant Beads Need To Be Added To The Metal Bowl. When It Needs To Be Replaced, The Beads Will Change From Blue To Pink..
【Stage 1: Filter & Regulator】Compressed Air Water Trap Filter Equipped With 5 Micron Element, Which Has Excellent Filtering Performance, Much Longer Life And Reuse Feasibility, Remove Most Of Moisture And Particles In The Air Line; Pressure Regulator Accurately Adjust And Stabilize The Air Pressure..
Features
- Zinc Alloy Body Higher Hardness and More Compression Resistance than Aluminum Alloy and Plastic Materials. Max Supply Pressure 145 psi; Operating Pressure 0-125 psi. Flow Rate 105 SCFM @ 90 psi (3000 L /Minute @ 6 Bar). Temperature Range 41-140 F 5-60 ).
- Stage 1: Filter & Regulator Compressed Air Water Trap Filter Equipped with 5 Micron Element, which has Excellent Filtering Performance, Much Longer Life and Reuse Feasibility, Remove Most of Moisture and Particles in the Air Line; Pressure Regulator Accurately Adjust and Stabilize the Air Pressure.
- Stage 2: Coalescing Filter The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up.
- Stage 3: Desiccant Air Dryer The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink.
- Accessories 2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 2x 3.5oz (100g) Desiccant Beads Bag. 2 x 1/2 NPT Fittings, a pair of 1/2 NPT Brass Air Coupler Plug Kit,1 x Thread Seal Tape.
- See more on Amazon...
Brand: NANPU | Manufacturer: NANPU
See On Amazon Similar To NANPU Zinc Alloy 3 Stage
#1
3 STAGE, HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES, METAL BOWLS, GREAT FOR PAINT SPRAY AND PLASMA CUTTER (1/2" NPT, AUTO DRAIN)
Asin: B07Y4183M7 | Ean: 0713807488222 | UPC: 713807488222
Stage 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 175 Psi. 5Oz Metal Bowl With Visible Sight Glass..
Stage 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5Oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccant Beads..
Stage 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5Oz Metal Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
175 Psi Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
Features
- 1/2" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1
- 175 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER
- STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 175 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS.
- STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE.
- STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. UNIT COMES WITH 2 BAGS DESICCANT BEADS.
- See more on Amazon...
Brand: EDGE INDUSTRIAL | Manufacturer: THB_EDGE
Weight: 6.00 pounds
See On Amazon #2
HEAVY DUTY INDUSTRIAL GRADE IN LINE DESICCANT AIR DRYER FOR COMPRESSED AIR COMPRESSORS, WITH METAL BOWL, SIGHT GLASS, WALL BRACKET AND 2 BAGS DESICCANT BEADS (1/2" NPT)
Asin: B07Y5JJNST | Ean: 0713807488253 | UPC: 713807488253
Please Note: 1/2" Npt Measures 0.850" Outside Thread Diameter In Inches.
Desiccant Beads Turn From Blue To Pink When Time To Change..
225 Psi Max Input Pressure, 60 Cfm Flow Rate, Comes With 2 Bags Of Desiccant Beads.
This Unit Will Remove Moisture From Your Compressed Air Lines..
Features
- 1/2" NPT, HEAVY DUTY INDUSTRIAL IN-LINE DESICCANT AIR DRYER WITH METAL BOWL
- THIS UNIT WILL REMOVE MOISTURE FROM YOUR COMPRESSED AIR LINES.
- PLEASE NOTE: 1/2 NPT MEASURES 0.850 OUTSIDE THREAD DIAMETER IN INCHES
- 225 PSI MAX INPUT PRESSURE, 60 CFM FLOW RATE, COMES WITH 2 BAGS OF DESICCANT BEADS
- DESICCANT BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE.
- See more on Amazon...
Brand: EDGE INDUSTRIAL | Manufacturer: THB_EDGE
Weight: 2.00 Pounds
See On Amazon
Looking For Something Else?
Search