4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set
Asin: B0B24YQK9W | Model: 90009 | PartNumber: 90009 | Ean: 0788489274982 | UPC: 788489274982
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy To Use: Assembly Instructions Included; More Convenient Than Lining Up Standard Clamps And Cauls; Attach Notched Bars To Any Length 1.5-Inch X 1.75-Inch (3.2Cm X 4.4Cm) Board (Equivalent To A 2X4 Ripped In Half) With Provided Screws, Set Clamp And Turn Handle To Tighten (On Large Pieces, We Recommend One Clamp Every 18 Inches/45.7Cm For Maximum Clamping Efficiency); Make Sure The 2X4s You Use Are Not Twisted; Drill Pilot Holes For The Outer-Most Screws When Attaching The Pressure Pads.
Contents: Large Notch Bars*2, Small Notch Bars*2, Pressure Pad*2, Clamp Assembly Head*1, Clamp Assembly Tail*1, Assembly Screw*16, Instruction Manual*1.
Adjusts To Your Project: Build Any Length Clamp With The Durable Plastic Bars With 12 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths; Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches; Turn The Handle To Tighten The Clamp And Unwind The Turn Handle To Release Pressure; Clamp Has Pressure Pads To Prevent Damage To The Edge Of Your Stock.
4-Way: Stock Stays Flat And Prevents Buckling Of Boards During Glue-Up Because Of The Equally Applied Pressure From All Four Directions (Top, Bottom, And Both Sides); Ideal For Gluing Table Tops, Shelving, Veneer, Laminates; Durable Clamp Only Limited By The Quality Of Prep And Glue Used.
Features
- LARGE PANEL GLUE-UPS: The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stock up to 6 inches (15.2cm) thick for simplifying the process of gluing table tops, countertops, furniture panels, cabinet doors, and more and saves you from using additional clamps to keep the glue-ups straight
- 4-WAY: Stock stays flat and prevents buckling of boards during glue-up because of the equally applied pressure from all four directions (top, bottom, and both sides); Ideal for gluing table tops, shelving, veneer, laminates; Durable clamp only limited by the quality of prep and glue used
- EASY TO USE: Assembly instructions included; More convenient than lining up standard clamps and cauls; Attach notched bars to any length 1.5-inch x 1.75-inch (3.2cm x 4.4cm) board (equivalent to a 2x4 ripped in half) with provided screws, set clamp and turn handle to tighten (on large pieces, we recommend one clamp every 18 inches/45.7cm for maximum clamping efficiency); Make sure the 2x4s you use are not twisted; Drill pilot holes for the outer-most screws when attaching the pressure pads
- ADJUSTS TO YOUR PROJECT: Build any length clamp with the durable plastic bars with 12 notches for maximum adjustability to handle a variety of stock widths; Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches; Turn the handle to tighten the clamp and unwind the turn handle to release pressure; Clamp has pressure pads to prevent damage to the edge of your stock
- CONTENTS: large notch bars*2, small notch bars*2, pressure pad*2, clamp assembly head*1, clamp assembly tail*1, assembly screw*16, instruction manual*1
- See more on Amazon...
Brand: NAGU | Manufacturer: NAGU
See On Amazon Similar To 4Way Pressure Release Clamp
#1
Woodworking Supply 4 Way Pressure Clamps for Clamping Panel Pressure Four Directions for Woodworkers Furniture Woodworking Tool
Asin: B0D4LX1HD9 | Ean: 7624331217376
Package Includes 2X 12.75Inch Long Notches 2X 6.9Inch Long Notches 1X Clamp Assembly Head, 1X Clamp Assembly Tail, 16X Assembly Screws (4X 3/8Inch, 12X 1-1/4Inch L), And Assembly Instructions; 1 Set With 1 Clamp; Wood Required, Not Included.
Stock Stay Flat And Prevents Buckling Of Board Because Of The Equally Apply Pressure From All Four Directions.
The 4-Way Pressure Release Clamp – Wood Panel Corner Clamping System Woodworking Bracket Set Handles Stocking Up To 6 Inches (15.2Cm) Thick For Simplifying The Processes Of Countertops, Furniture Panel.
More Convenient Than Lining Up Standard Clamps And Cauls; Attach Notched To Any Length 1.5Inchx1.75Inch (3.2X4.4Cm) Board (Equivalent To A 2X4 In Half) With Provided Screws, Set Clamp And Turn Handle To Tighten. Make Sure The 2X4s You Use Not Twist; Drill Holes For The Outer-Most Screws When Attaching The Pressure Pad.
Features
- Build any length clamp with the with 12 notches for adjustability to handle a variety of stock widths; Turn the handle to tighten the clamp and unwinded the handle to release pressure; Clamp have pressure pad to prevent damage of your stock
- More convenient than lining up standard clamps and cauls; Attach notched to any length 1.5inchx1.75inch (3.2x4.4cm) board (equivalent to a 2x4 in half) with provided screws, set clamp and turn handle to tighten. Make sure the 2x4s you use not twist; Drill holes for the outer-most screws when attaching the pressure pad
- Package includes 2x 12.75inch long notches 2x 6.9inch long notches 1x clamp assembly head, 1x clamp assembly tail, 16x assembly screws (4x 3/8inch, 12x 1-1/4inch L), and assembly instructions; 1 set with 1 clamp; Wood required, not included
- The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stocking up to 6 inches (15.2cm) thick for simplifying the processes of countertops, furniture panel
- Stock stay flat and prevents buckling of board because of the equally apply pressure from all four directions
- See more on Amazon...
Brand: Xuanxi | Manufacturer: Xuanxi
See On Amazon #2
4-Way Pressure Release Clamp Wood Panel Corner Clamping Woodworking Bracket Set For Furniture Cabinets Woodworking Equipment
Asin: B0D4JCRQ7F | Ean: 7633231613331
Build Any Length Clamp With The With 12 Notches For Adjustability To Handle A Variety Of Stock Widths; Turn The Handle To Tighten The Clamp And Unwinded The Handle To Release Pressure; Clamp Have Pressure Pad To Prevent Damage Of Your Stock.
Package Includes 2X 12.75Inch Long Notches 2X 6.9Inch Long Notches 1X Clamp Assembly Head, 1X Clamp Assembly Tail, 16X Assembly Screws (4X 3/8Inch, 12X 1-1/4Inch L), And Assembly Instructions; 1 Set With 1 Clamp; Wood Required, Not Included.
More Convenient Than Lining Up Standard Clamps And Cauls; Attach Notched To Any Length 1.5Inchx1.75Inch (3.2X4.4Cm) Board (Equivalent To A 2X4 In Half) With Provided Screws, Set Clamp And Turn Handle To Tighten. Make Sure The 2X4s You Use Not Twist; Drill Holes For The Outer-Most Screws When Attaching The Pressure Pad.
The 4-Way Pressure Release Clamp – Wood Panel Corner Clamping System Woodworking Bracket Set Handles Stocking Up To 6 Inches (15.2Cm) Thick For Simplifying The Processes Of Countertops, Furniture Panel.
Features
- Stock stay flat and prevents buckling of board because of the equally apply pressure from all four directions
- The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stocking up to 6 inches (15.2cm) thick for simplifying the processes of countertops, furniture panel
- Build any length clamp with the with 12 notches for adjustability to handle a variety of stock widths; Turn the handle to tighten the clamp and unwinded the handle to release pressure; Clamp have pressure pad to prevent damage of your stock
- More convenient than lining up standard clamps and cauls; Attach notched to any length 1.5inchx1.75inch (3.2x4.4cm) board (equivalent to a 2x4 in half) with provided screws, set clamp and turn handle to tighten. Make sure the 2x4s you use not twist; Drill holes for the outer-most screws when attaching the pressure pad
- Package includes 2x 12.75inch long notches 2x 6.9inch long notches 1x clamp assembly head, 1x clamp assembly tail, 16x assembly screws (4x 3/8inch, 12x 1-1/4inch L), and assembly instructions; 1 set with 1 clamp; Wood required, not included
- See more on Amazon...
Brand: HIZXMCNGH | Manufacturer: HIZXMCNGH
See On Amazon #3
Wood Panel Fixing Clamp Adjustable Width Bend Resistance Multifunctional 4 Way Pressure Release Clamp For Woodworking Woodworking Tool
Asin: B0D4HZT7TQ | Ean: 7445437923431
The 4-Way Pressure Release Clamp – Wood Panel Corner Clamping System Woodworking Bracket Set Handles Stocking Up To 6 Inches (15.2Cm) Thick For Simplifying The Processes Of Countertops, Furniture Panel.
Package Includes 2X 12.75Inch Long Notches 2X 6.9Inch Long Notches 1X Clamp Assembly Head, 1X Clamp Assembly Tail, 16X Assembly Screws (4X 3/8Inch, 12X 1-1/4Inch L), And Assembly Instructions; 1 Set With 1 Clamp; Wood Required, Not Included.
More Convenient Than Lining Up Standard Clamps And Cauls; Attach Notched To Any Length 1.5Inchx1.75Inch (3.2X4.4Cm) Board (Equivalent To A 2X4 In Half) With Provided Screws, Set Clamp And Turn Handle To Tighten. Make Sure The 2X4s You Use Not Twist; Drill Holes For The Outer-Most Screws When Attaching The Pressure Pad.
Build Any Length Clamp With The With 12 Notches For Adjustability To Handle A Variety Of Stock Widths; Turn The Handle To Tighten The Clamp And Unwinded The Handle To Release Pressure; Clamp Have Pressure Pad To Prevent Damage Of Your Stock.
Features
- Stock stay flat and prevents buckling of board because of the equally apply pressure from all four directions
- Build any length clamp with the with 12 notches for adjustability to handle a variety of stock widths; Turn the handle to tighten the clamp and unwinded the handle to release pressure; Clamp have pressure pad to prevent damage of your stock
- The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stocking up to 6 inches (15.2cm) thick for simplifying the processes of countertops, furniture panel
- More convenient than lining up standard clamps and cauls; Attach notched to any length 1.5inchx1.75inch (3.2x4.4cm) board (equivalent to a 2x4 in half) with provided screws, set clamp and turn handle to tighten. Make sure the 2x4s you use not twist; Drill holes for the outer-most screws when attaching the pressure pad
- Package includes 2x 12.75inch long notches 2x 6.9inch long notches 1x clamp assembly head, 1x clamp assembly tail, 16x assembly screws (4x 3/8inch, 12x 1-1/4inch L), and assembly instructions; 1 set with 1 clamp; Wood required, not included
- See more on Amazon...
Brand: Axyghmz | Manufacturer: Axyghmz
See On Amazon #4
4-Way Pressure Release Clamp Wood Panel Corner Clamping Woodworking Bracket Set For Furniture Cabinets Woodworking Equipment
Asin: B0D4D642YP | Ean: 7620020990605
Package Includes 2X 12.75Inch Long Notches 2X 6.9Inch Long Notches 1X Clamp Assembly Head, 1X Clamp Assembly Tail, 16X Assembly Screws (4X 3/8Inch, 12X 1-1/4Inch L), And Assembly Instructions; 1 Set With 1 Clamp; Wood Required, Not Included.
Stock Stay Flat And Prevents Buckling Of Board Because Of The Equally Apply Pressure From All Four Directions.
More Convenient Than Lining Up Standard Clamps And Cauls; Attach Notched To Any Length 1.5Inchx1.75Inch (3.2X4.4Cm) Board (Equivalent To A 2X4 In Half) With Provided Screws, Set Clamp And Turn Handle To Tighten. Make Sure The 2X4s You Use Not Twist; Drill Holes For The Outer-Most Screws When Attaching The Pressure Pad.
Build Any Length Clamp With The With 12 Notches For Adjustability To Handle A Variety Of Stock Widths; Turn The Handle To Tighten The Clamp And Unwinded The Handle To Release Pressure; Clamp Have Pressure Pad To Prevent Damage Of Your Stock.
Features
- The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stocking up to 6 inches (15.2cm) thick for simplifying the processes of countertops, furniture panel
- Build any length clamp with the with 12 notches for adjustability to handle a variety of stock widths; Turn the handle to tighten the clamp and unwinded the handle to release pressure; Clamp have pressure pad to prevent damage of your stock
- Package includes 2x 12.75inch long notches 2x 6.9inch long notches 1x clamp assembly head, 1x clamp assembly tail, 16x assembly screws (4x 3/8inch, 12x 1-1/4inch L), and assembly instructions; 1 set with 1 clamp; Wood required, not included
- More convenient than lining up standard clamps and cauls; Attach notched to any length 1.5inchx1.75inch (3.2x4.4cm) board (equivalent to a 2x4 in half) with provided screws, set clamp and turn handle to tighten. Make sure the 2x4s you use not twist; Drill holes for the outer-most screws when attaching the pressure pad
- Stock stay flat and prevents buckling of board because of the equally apply pressure from all four directions
- See more on Amazon...
Brand: Mllepjdh | Manufacturer: Mllepjdh
See On Amazon #5
Woodworking Supply 4 Way Pressure Clamps For Clamping Panel Pressure Four Directions For Woodworkers Furniture Woodworking Support
Asin: B0D4C8C8YJ | Ean: 7622766652380
Stock Stay Flat And Prevents Buckling Of Board Because Of The Equally Apply Pressure From All Four Directions.
More Convenient Than Lining Up Standard Clamps And Cauls; Attach Notched To Any Length 1.5Inchx1.75Inch (3.2X4.4Cm) Board (Equivalent To A 2X4 In Half) With Provided Screws, Set Clamp And Turn Handle To Tighten. Make Sure The 2X4s You Use Not Twist; Drill Holes For The Outer-Most Screws When Attaching The Pressure Pad.
Build Any Length Clamp With The With 12 Notches For Adjustability To Handle A Variety Of Stock Widths; Turn The Handle To Tighten The Clamp And Unwinded The Handle To Release Pressure; Clamp Have Pressure Pad To Prevent Damage Of Your Stock.
Package Includes 2X 12.75Inch Long Notches 2X 6.9Inch Long Notches 1X Clamp Assembly Head, 1X Clamp Assembly Tail, 16X Assembly Screws (4X 3/8Inch, 12X 1-1/4Inch L), And Assembly Instructions; 1 Set With 1 Clamp; Wood Required, Not Included.
Features
- The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stocking up to 6 inches (15.2cm) thick for simplifying the processes of countertops, furniture panel
- Package includes 2x 12.75inch long notches 2x 6.9inch long notches 1x clamp assembly head, 1x clamp assembly tail, 16x assembly screws (4x 3/8inch, 12x 1-1/4inch L), and assembly instructions; 1 set with 1 clamp; Wood required, not included
- Stock stay flat and prevents buckling of board because of the equally apply pressure from all four directions
- Build any length clamp with the with 12 notches for adjustability to handle a variety of stock widths; Turn the handle to tighten the clamp and unwinded the handle to release pressure; Clamp have pressure pad to prevent damage of your stock
- More convenient than lining up standard clamps and cauls; Attach notched to any length 1.5inchx1.75inch (3.2x4.4cm) board (equivalent to a 2x4 in half) with provided screws, set clamp and turn handle to tighten. Make sure the 2x4s you use not twist; Drill holes for the outer-most screws when attaching the pressure pad
- See more on Amazon...
Brand: LOXGO | Manufacturer: LOXGO
See On Amazon #6
4 Way Pressure Release Clamp Adjustable Width Bend Resistance Multifunctional Wood Panel Corner Clamp For Woodworking Woodworking Support
Asin: B0D49WWC21 | Ean: 7628634050487
The 4-Way Pressure Release Clamp – Wood Panel Corner Clamping System Woodworking Bracket Set Handles Stocking Up To 6 Inches (15.2Cm) Thick For Simplifying The Processes Of Countertops, Furniture Panel.
Build Any Length Clamp With The With 12 Notches For Adjustability To Handle A Variety Of Stock Widths; Turn The Handle To Tighten The Clamp And Unwinded The Handle To Release Pressure; Clamp Have Pressure Pad To Prevent Damage Of Your Stock.
Package Includes 2X 12.75Inch Long Notches 2X 6.9Inch Long Notches 1X Clamp Assembly Head, 1X Clamp Assembly Tail, 16X Assembly Screws (4X 3/8Inch, 12X 1-1/4Inch L), And Assembly Instructions; 1 Set With 1 Clamp; Wood Required, Not Included.
Stock Stay Flat And Prevents Buckling Of Board Because Of The Equally Apply Pressure From All Four Directions.
Features
- More convenient than lining up standard clamps and cauls; Attach notched to any length 1.5inchx1.75inch (3.2x4.4cm) board (equivalent to a 2x4 in half) with provided screws, set clamp and turn handle to tighten. Make sure the 2x4s you use not twist; Drill holes for the outer-most screws when attaching the pressure pad
- Stock stay flat and prevents buckling of board because of the equally apply pressure from all four directions
- The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stocking up to 6 inches (15.2cm) thick for simplifying the processes of countertops, furniture panel
- Package includes 2x 12.75inch long notches 2x 6.9inch long notches 1x clamp assembly head, 1x clamp assembly tail, 16x assembly screws (4x 3/8inch, 12x 1-1/4inch L), and assembly instructions; 1 set with 1 clamp; Wood required, not included
- Build any length clamp with the with 12 notches for adjustability to handle a variety of stock widths; Turn the handle to tighten the clamp and unwinded the handle to release pressure; Clamp have pressure pad to prevent damage of your stock
- See more on Amazon...
Brand: Osdhezcn | Manufacturer: Osdhezcn
See On Amazon #7
4-Way Pressure Release Clamp Wood Panel Corner Clamping Woodworking Bracket Set For Furniture Cabinets Shelf
Asin: B0D489N2P8 | Ean: 7636820261494
Stock Stay Flat And Prevents Buckling Of Board Because Of The Equally Apply Pressure From All Four Directions.
Build Any Length Clamp With The With 12 Notches For Adjustability To Handle A Variety Of Stock Widths; Turn The Handle To Tighten The Clamp And Unwinded The Handle To Release Pressure; Clamp Have Pressure Pad To Prevent Damage Of Your Stock.
The 4-Way Pressure Release Clamp – Wood Panel Corner Clamping System Woodworking Bracket Set Handles Stocking Up To 6 Inches (15.2Cm) Thick For Simplifying The Processes Of Countertops, Furniture Panel.
Package Includes 2X 12.75Inch Long Notches 2X 6.9Inch Long Notches 1X Clamp Assembly Head, 1X Clamp Assembly Tail, 16X Assembly Screws (4X 3/8Inch, 12X 1-1/4Inch L), And Assembly Instructions; 1 Set With 1 Clamp; Wood Required, Not Included.
Features
- More convenient than lining up standard clamps and cauls; Attach notched to any length 1.5inchx1.75inch (3.2x4.4cm) board (equivalent to a 2x4 in half) with provided screws, set clamp and turn handle to tighten. Make sure the 2x4s you use not twist; Drill holes for the outer-most screws when attaching the pressure pad
- Package includes 2x 12.75inch long notches 2x 6.9inch long notches 1x clamp assembly head, 1x clamp assembly tail, 16x assembly screws (4x 3/8inch, 12x 1-1/4inch L), and assembly instructions; 1 set with 1 clamp; Wood required, not included
- Stock stay flat and prevents buckling of board because of the equally apply pressure from all four directions
- The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stocking up to 6 inches (15.2cm) thick for simplifying the processes of countertops, furniture panel
- Build any length clamp with the with 12 notches for adjustability to handle a variety of stock widths; Turn the handle to tighten the clamp and unwinded the handle to release pressure; Clamp have pressure pad to prevent damage of your stock
- See more on Amazon...
Brand: BaoFufc | Manufacturer: BaoFufc
See On Amazon #8
4-Way Pressure Release Clamp For Clamping Panel Wood Panel Corner Clamping Woodworking Bracket Clamp Set Woodworking Supply
Asin: B0D47MYZWD | Ean: 7636950046848
More Convenient Than Lining Up Standard Clamps And Cauls; Attach Notched To Any Length 1.5Inchx1.75Inch (3.2X4.4Cm) Board (Equivalent To A 2X4 In Half) With Provided Screws, Set Clamp And Turn Handle To Tighten. Make Sure The 2X4s You Use Not Twist; Drill Holes For The Outer-Most Screws When Attaching The Pressure Pad.
Stock Stay Flat And Prevents Buckling Of Board Because Of The Equally Apply Pressure From All Four Directions.
Build Any Length Clamp With The With 12 Notches For Adjustability To Handle A Variety Of Stock Widths; Turn The Handle To Tighten The Clamp And Unwinded The Handle To Release Pressure; Clamp Have Pressure Pad To Prevent Damage Of Your Stock.
The 4-Way Pressure Release Clamp – Wood Panel Corner Clamping System Woodworking Bracket Set Handles Stocking Up To 6 Inches (15.2Cm) Thick For Simplifying The Processes Of Countertops, Furniture Panel.
Features
- Package includes 2x 12.75inch long notches 2x 6.9inch long notches 1x clamp assembly head, 1x clamp assembly tail, 16x assembly screws (4x 3/8inch, 12x 1-1/4inch L), and assembly instructions; 1 set with 1 clamp; Wood required, not included
- The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stocking up to 6 inches (15.2cm) thick for simplifying the processes of countertops, furniture panel
- More convenient than lining up standard clamps and cauls; Attach notched to any length 1.5inchx1.75inch (3.2x4.4cm) board (equivalent to a 2x4 in half) with provided screws, set clamp and turn handle to tighten. Make sure the 2x4s you use not twist; Drill holes for the outer-most screws when attaching the pressure pad
- Build any length clamp with the with 12 notches for adjustability to handle a variety of stock widths; Turn the handle to tighten the clamp and unwinded the handle to release pressure; Clamp have pressure pad to prevent damage of your stock
- Stock stay flat and prevents buckling of board because of the equally apply pressure from all four directions
- See more on Amazon...
Brand: NIHUIFA | Manufacturer: NIHUIFA
See On Amazon #9
4-Way Pressure Release Clamp For Clamping Panel Wood Panel Corner Clamping Woodworking Bracket Clamp Set
Asin: B0D47GXTNN | Ean: 7624190092756
The 4-Way Pressure Release Clamp – Wood Panel Corner Clamping System Woodworking Bracket Set Handles Stocking Up To 6 Inches (15.2Cm) Thick For Simplifying The Processes Of Countertops, Furniture Panel.
Stock Stay Flat And Prevents Buckling Of Board Because Of The Equally Apply Pressure From All Four Directions.
Build Any Length Clamp With The With 12 Notches For Adjustability To Handle A Variety Of Stock Widths; Turn The Handle To Tighten The Clamp And Unwinded The Handle To Release Pressure; Clamp Have Pressure Pad To Prevent Damage Of Your Stock.
Package Includes 2X 12.75Inch Long Notches 2X 6.9Inch Long Notches 1X Clamp Assembly Head, 1X Clamp Assembly Tail, 16X Assembly Screws (4X 3/8Inch, 12X 1-1/4Inch L), And Assembly Instructions; 1 Set With 1 Clamp; Wood Required, Not Included.
Features
- More convenient than lining up standard clamps and cauls; Attach notched to any length 1.5inchx1.75inch (3.2x4.4cm) board (equivalent to a 2x4 in half) with provided screws, set clamp and turn handle to tighten. Make sure the 2x4s you use not twist; Drill holes for the outer-most screws when attaching the pressure pad
- Package includes 2x 12.75inch long notches 2x 6.9inch long notches 1x clamp assembly head, 1x clamp assembly tail, 16x assembly screws (4x 3/8inch, 12x 1-1/4inch L), and assembly instructions; 1 set with 1 clamp; Wood required, not included
- The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stocking up to 6 inches (15.2cm) thick for simplifying the processes of countertops, furniture panel
- Build any length clamp with the with 12 notches for adjustability to handle a variety of stock widths; Turn the handle to tighten the clamp and unwinded the handle to release pressure; Clamp have pressure pad to prevent damage of your stock
- Stock stay flat and prevents buckling of board because of the equally apply pressure from all four directions
- See more on Amazon...
Brand: JiaYuzhu | Manufacturer: JiaYuzhu
See On Amazon #10
4 Way Pressure Release Clamp Adjustable Width Bend Resistance Multifunctional Wood Panel Corner Clamp for Woodworking Shelf
Asin: B0D41T9F6T | Ean: 7629661008410
More Convenient Than Lining Up Standard Clamps And Cauls; Attach Notched To Any Length 1.5Inchx1.75Inch (3.2X4.4Cm) Board (Equivalent To A 2X4 In Half) With Provided Screws, Set Clamp And Turn Handle To Tighten. Make Sure The 2X4s You Use Not Twist; Drill Holes For The Outer-Most Screws When Attaching The Pressure Pad.
Stock Stay Flat And Prevents Buckling Of Board Because Of The Equally Apply Pressure From All Four Directions.
The 4-Way Pressure Release Clamp – Wood Panel Corner Clamping System Woodworking Bracket Set Handles Stocking Up To 6 Inches (15.2Cm) Thick For Simplifying The Processes Of Countertops, Furniture Panel.
Build Any Length Clamp With The With 12 Notches For Adjustability To Handle A Variety Of Stock Widths; Turn The Handle To Tighten The Clamp And Unwinded The Handle To Release Pressure; Clamp Have Pressure Pad To Prevent Damage Of Your Stock.
Features
- Package includes 2x 12.75inch long notches 2x 6.9inch long notches 1x clamp assembly head, 1x clamp assembly tail, 16x assembly screws (4x 3/8inch, 12x 1-1/4inch L), and assembly instructions; 1 set with 1 clamp; Wood required, not included
- Build any length clamp with the with 12 notches for adjustability to handle a variety of stock widths; Turn the handle to tighten the clamp and unwinded the handle to release pressure; Clamp have pressure pad to prevent damage of your stock
- More convenient than lining up standard clamps and cauls; Attach notched to any length 1.5inchx1.75inch (3.2x4.4cm) board (equivalent to a 2x4 in half) with provided screws, set clamp and turn handle to tighten. Make sure the 2x4s you use not twist; Drill holes for the outer-most screws when attaching the pressure pad
- The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stocking up to 6 inches (15.2cm) thick for simplifying the processes of countertops, furniture panel
- Stock stay flat and prevents buckling of board because of the equally apply pressure from all four directions
- See more on Amazon...
Brand: PURPLELILY | Manufacturer: PURPLELILY
See On Amazon
Looking For Something Else?
Search