4Pack Anti-Scratch Mounting Magnets, 30LBS Rubber Coated Neodymium Magnets with M4 Threaded Studs, Non-Slip Strong Monting Magnet for Led Lighting Bar, Neodymium Magnet Base for Signal Lighting
Asin: B0B2JHRX5R
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Scratch Safe Surface: These Rubber Coated Magnets Are Covered With Rubber To Enhance The Bearing Capacity Of Lateral Load, And To Protect The Adsorbed Object; At The Same Time, The Rubber Layer Will Not Allow External Stains To Pollute The Magnet Inside, So They Can Be Applied Outdoors For A Long Time With Confidence..
"Better Magnetism And Performance: The Base Mount Black Rare Earth Magnets Have A Vertical Magnetic Pull 30Lbs On A Large Steel Plate 0.2 Inches (5 Mm) Thick And 1.69 Inches In Diameter, Better Performance Can Provide More Convenience And Help For Your Life ".
Outdoor Use: Our Neodymium Rubber Coated Magnet Have 3 Layers Of Corrosion Resistant Coating On Their Surface, Which Can Protect The Accessory, And The Outer Rubber Coating Is Also Waterproof, So Magnetic License Plate Holder Can Be Applied Outdoors For A Long Time With Confidence..
Easy To Use And Widely Applied: Magnets With Studs Comes With An M4 Standard External Thread Stud In The Center, Equipped With Washers And A Nut, Making Camera Magnetic Mount Easy For You To Fit Hardware Together For Your Camera Mounts, Automatic Equipment And Other Machines, A Nice Helper In Your Life..
Features
- Multi-Use of round strong magnetic thread: M4 Standard female thread hole with one Screw, the assembly with Male M4 thread stud can directly be screwed into it or the Screw going through a hole of assembly body and fastened . Great for Led working Light, off-road vehicle led lighting bar , display panel , automatic equipment, tools and machines.
- Easy to Use and Widely Applied: magnets with studs comes with an M4 standard external thread stud in the center, equipped with washers and a nut, making camera magnetic mount easy for you to fit hardware together for your camera mounts, automatic equipment and other machines, a nice helper in your life.
- Scratch Safe Surface: these rubber coated magnets are covered with rubber to enhance the bearing capacity of lateral load, and to protect the adsorbed object; At the same time, the rubber layer will not allow external stains to pollute the magnet inside, so they can be applied outdoors for a long time with confidence.
- Outdoor use: our neodymium rubber coated magnet have 3 layers of corrosion resistant coating on their surface, which can protect the accessory, and the outer rubber coating is also waterproof, so magnetic license plate holder can be applied outdoors for a long time with confidence.
- Better magnetism and performance: the base mount black rare earth magnets have a vertical magnetic pull 30LBS on a large steel plate 0.2 inches (5 mm) thick and 1.69 inches in diameter, better performance can provide more convenience and help for your life
- See more on Amazon...
Brand: MAGXCENE | Manufacturer: MAGXCENE
Dimensions: 0.23 x 1.69 x 1.69 inches
See On Amazon Similar To 4Pack AntiScratch Mounting Magnets 30LBS
#1
Neosmuk Rare Earth Magnets, Super Strong Magnet Heavy Duty for Craft, Neodymium Magnets with Adhesive Backing for Board, Thin Powerful Large and Industrial Magnets Stick for Cabinet, Refrigerator
Asin: B08C2N1L2C | Ean: 0669614541523 | UPC: 669614541523
✔ Portable Size - Our Magnet Has Dimensions Of 1.26 Inches In Diameter And 0.126 Inches Long. Medium Sizes And 6 Pack Quantities Are Ideal For Carrying And Use..
✔ Permanent Neosmuk Neodymium Magnets, Magnetism Lasts Forever!.
✔ Extra 3M Adhesive Backing - With The Help Of 3M Backing Adhesive, The Application Of Magnet Is Greatly Expanded. You Can Hang Your Crafts, Tools... Almost Anywhere.
✔ High-Level Plating - Neosmuk's Nickel-Copper-Nickel Coating Plated On Magnet Provides S A Shiny, Rust-Free, And Mirror-Like Finish, It Particularly Exhibits An Excellent Anti-Corrosive Property And Scratch-Resistance And Has A High Washability That Substantially Reduces Residual Dust And Foreign Objects, Along With The Dimensional Precision. Maintenance-Free, No Rust!.
Features
- SUPER POWERFUL - Amazing strong, sturdy, and reliable industrial-grade magnet, made from Neosmuk s state-of-the-art powder metallurgy technologies, it strongly attracts any items made of ferromagnetic materials.
- HIGH-LEVEL PLATING - Neosmuk's nickel-copper-nickel coating plated on magnet provides s a shiny, rust-free, and mirror-like finish, It particularly exhibits an excellent anti-corrosive property and scratch-resistance and has a high washability that substantially reduces residual dust and foreign objects, along with the dimensional precision. Maintenance-free, no rust!
- Portable Size - Our magnet has dimensions of 1.26 inches in diameter and 0.126 inches long. Medium sizes and 6 pack quantities are ideal for carrying and use.
- Extra 3M Adhesive Backing - With the help of 3M backing adhesive, the application of magnet is greatly expanded. You can hang your crafts, tools... almost anywhere
- Permanent Neosmuk Neodymium magnets, magnetism lasts forever!
- See more on Amazon...
Brand: Neosmuk | Manufacturer: Smuk magnet
See On Amazon #2
Magnetpro 4 Pieces Strong Rubber Coated Mounting Magnets Anti-Scratch, 30 LBS of Adhesive Power, Magnetic Assembly Base for Light Strips and Additional Mirrors The Outdoor Area
Asin: B0C9M17LZM | Model: MX | PartNumber: MX | Ean: 6976706300123
✔️ Multifunctional Use: The Package Contains M4-Hexagon Screws, Washers, Spring Slices And A Small Hex Wrench. Suitable For Attaching Perforated Objects Of Different Thicknesses. Ideal For Cameras, Light Strips, Scoreboards, Automatic Devices, Tools And Machines..
✔️ We Adhere To Material Standards: We Insist On Not Using Inferior Magnets With Low Coercivity And Reduced Neodymium Content. Using Magnetpro Magnets Makes Life More Convenient..
✔️ Suitable For Outdoor Use: Water-Repellent And Wear-Resistant Rubber Coating. Loss Of Magnetic Properties No More Than 2 % Within 10 Years. Permanent Use Also Outdoors..
✔️Anti Scratches And Anti-Slip: Coated Rubber Can Protect The Magnet From Damage, Avoid Scratches On The Paint Surface And Prevent The Magnet From Slipping On Smooth Surfaces..
Features
- Strong magnets for high loads: The round base with 6 REAL N52 rare earth magnets has a SUPER vertical magnetic attraction OVER 30 LBS on a 0.2" thick steel plate foundation. Size 1.69" x 0.24".
- Anti Scratches and Anti-Slip: coated rubber can protect the magnet from damage, avoid scratches on the paint surface and prevent the magnet from slipping on smooth surfaces.
- Multifunctional use: The package contains M4-hexagon screws, washers, spring slices and a small hex wrench. Suitable for attaching perforated objects of different thicknesses. Ideal for cameras, light strips, scoreboards, automatic devices, tools and machines.
- Suitable for outdoor use: Water-repellent and wear-resistant rubber coating. Loss of magnetic properties no more than 2 % within 10 years. Permanent use also outdoors.
- We adhere to material standards: We insist on not using inferior magnets with low coercivity and reduced neodymium content. Using Magnetpro magnets makes life more convenient.
- See more on Amazon...
Brand: Magnetpro | Manufacturer: Magnetpro
Dimensions: 0.24 x 1.69 x 1.69 Inches
See On Amazon #3
DIYMAG 6Pcs Rubber Coated Magnets, 30LBS Anti-Scratch Neodymium Magnet Base with M5 Threaded Studs and Nuts Strong Magnets Hold The Base for Light Bar Mirror Camera Tool 6 Pack,1.69 Inch)
Asin: B0C8J8K5M7
Magnets With Rubber Coating: Neodymium Magnet Base Are Coated With Rubber To Protect The Magnet From Damage, Avoid Scratch Of Painting Surface And Limit Slipping The Magnet On Smooth Surface.
Multifunctional Use: M5 Male Thread Stud, Directly Screw Into The Threaded Hole Of The Fixed Body Or Putting Through A Hole And Fastening With Washer To Attach Any Hardware Assembly. Great For Camera, Light Bar, Display Panel, Automatic Equipment, Tools Magnetic License Plate Holder And Machines.
Convenient For Outdoor Use: Our Vertical Neodymium Disc Magnets Have 3 Layers Of Corrosion Resistant Coating On Their Surface, Which Can Protect The Accessory, And The Outer Rubber Coating Is Also Waterproof, So They Can Be Applied Outdoors For A Long Time With Confidence.
Strong Magnets Hold The Base: Round Base With Rubber Coating Is Measured 1.69" In Diameter, And It Is Equipped With 6 Pieces Of Neodymium Magnets Inside, Has A Vertical Magnetic Pull Force Of 30Lbs On Base Of Steel Plate.
Features
- Complete Range of Accessories: You will receive 6 packs of threaded magnets with black rubber coating, including threaded magnets with bolts, M5 spring washers, M5 flat washers and M5 nuts, sufficient in quantity to meet your using needs
- Strong Magnets Hold the Base: Round base with rubber coating is measured 1.69 in diameter, and it is equipped with 6 pieces of neodymium magnets inside, has a vertical magnetic pull force of 30LBS on base of steel plate
- Magnets with Rubber Coating: Neodymium Magnet Base are coated with rubber to protect the magnet from damage, avoid scratch of painting surface and limit slipping the magnet on smooth surface
- Convenient for Outdoor Use: Our vertical neodymium disc magnets have 3 layers of corrosion resistant coating on their surface, which can protect the accessory, and the outer rubber coating is also waterproof, so they can be applied outdoors for a long time with confidence
- Multifunctional Use: M5 Male thread Stud, directly screw into the threaded hole of the fixed body or putting through a hole and fastening with washer to attach any hardware assembly. Great for camera, light bar, display panel, automatic equipment, tools magnetic license plate holder and machines
- See more on Amazon...
Brand: DIYMAG | Manufacturer: DIYMAG
See On Amazon #4
DIYMAG 4Pcs Rubber Coated Anti-Scratch Mounting Magnets, 30LBS Neodymium Magnet Base with M5 Threaded Studs Strong Magnets Hold The Base for Light Bar Mirror Camera Tool 4 Pack,1.69 Inch
Asin: B0CW5ZVMF6 | Model: DIYMAG | PartNumber: DIYMAG
【Magnets With Rubber Coating】Neodymium Magnet Base Are Coated With Rubber To Protect The Magnet From Damage, Avoid Scratch Of Painting Surface And Limit Slipping The Magnet On Smooth Surface.
【Multifunctional Use】 Magnet With M5 Hexagonal Screws Can Be Directly Screwed Into The Threaded Hole Of The Fixing Body Or Threaded Through The Hole And Secured With A Washer To Connect Any Hardware Component. Great For Cameras, Light Strips, Display Panels, Automation Equipment, Tools, And Machines.
【Convenient For Outdoor Use】Our Vertical Neodymium Disc Magnets Have 3 Layers Of Corrosion Resistant Coating On Their Surface, Which Can Protect The Accessory, And The Outer Rubber Coating Is Also Waterproof, So They Can Be Applied Outdoors For A Long Time With Confidence.
【Strong Magnets Hold The Base】Round Base With Rubber Coating Is Measured 1.69" In Diameter, And It Is Equipped With 6 Pieces Of Neodymium Magnets Inside, Has A Vertical Magnetic Pull Force Of 30Lbs On Base Of Steel Plate.
Features
- Mounting Magnets Set You will receive 4 packs of threaded magnets with black rubber coating, M5 Standard female thread hole with one Screw one spacer, two spring washers, Components with M5 external thread bolts can be directly screwed into them, or screws can be fixed through the holes in the component body
- Strong Magnets Hold the Base Round base with rubber coating is measured 1.69 in diameter, and it is equipped with 6 pieces of neodymium magnets inside, has a vertical magnetic pull force of 30LBS on base of steel plate
- Magnets with Rubber Coating Neodymium Magnet Base are coated with rubber to protect the magnet from damage, avoid scratch of painting surface and limit slipping the magnet on smooth surface
- Convenient for Outdoor Use Our vertical neodymium disc magnets have 3 layers of corrosion resistant coating on their surface, which can protect the accessory, and the outer rubber coating is also waterproof, so they can be applied outdoors for a long time with confidence
- Multifunctional Use Magnet with M5 hexagonal screws can be directly screwed into the threaded hole of the fixing body or threaded through the hole and secured with a washer to connect any hardware component. Great for cameras, light strips, display panels, automation equipment, tools, and machines
- See more on Amazon...
Brand: DIYMAG | Manufacturer: DIYMAG
See On Amazon #5
LOVIMAG Strong Magnets,150lb+ Waterproof Strong Neodymium Cup Magnets with Screws for Wall Mounting, Heavy Duty Rare Earth Magnets with Holes for Holding Tools Lifting, Hanging(Silver, 12 Pack)
Asin: B0CS6LTLHN
【Very Sturable】This Heavy Duty Magnets Are Made Of Precision Mechanical Vehicles And These Strong Magnets Will Not Break In Normal Use Since The Magnets Are Protected Inside The Steel Cups Which Greatly Increase The Longevity Of The Magnets. Smooth Surface And One-Off Appearance Reduce Your Unnecessary Troubles..
【Quality Guaranteed】Our Strong Neodymium Cup Magnets Made Under Iso 9001 Quality Systems. The Highest Quality Available! These Strong Magnets Are Very Fragile, It Is Forbidden To Collide With Other Metal Objects (Including Another Magnet), So Be Careful When You Are Trying Separte Them !If You Have Any Questions Please Contact Us Freely!.
【Extensive Use】These Strong Neodymium Cup Magnets With Heavy Duty Countersunk Hole And Twelve Free Screws Can Be Used In A Variety Of Life Scenarios,Perfect For Handy Assembly For Home, Business And Schools! Holding, Lifting, Fishing, Closing, Retrieving, Blackboard And Refrigerator And Much More, Use It With Our Accessories Which Brings Different Gravitational Experience To Your Life..
【Magnets Coated】Strong Magnets Has Ni+Cu+Ni Triple Layer Coated. The Best Coating Available, Which Provides A Shiny And Rust Resistant Protection For The Cup Magnets..
Features
- STRONG POWERFUL These 1.42 inches industrial strength strong round base magnets made of neodymium rare earth magnetic materia,unbelievable holding power for the size, per strong rare earth magnet can up to 150 pound holding power, fit most of the uses in your life.
- MAGNETS COATED Strong magnets has Ni+Cu+Ni triple layer coated. The best coating available, which provides a shiny and rust resistant protection for the cup magnets.
- VERY STURABLE This heavy duty magnets are made of precision mechanical vehicles and these strong magnets will not break in normal use since the magnets are protected inside the steel cups which greatly increase the longevity of the magnets. Smooth surface and one-off appearance reduce your unnecessary troubles.
- EXTENSIVE USE These strong neodymium cup magnets with heavy duty countersunk hole and twelve free screws can be used in a variety of life scenarios,perfect for handy assembly for home, business and schools! Holding, lifting, fishing, closing, retrieving, blackboard and refrigerator and much more, use it with our accessories which brings different gravitational experience to your life.
- QUALITY GUARANTEED Our strong neodymium cup magnets made under ISO 9001 quality systems. The highest quality available! These strong magnets are very fragile, it is forbidden to collide with other metal objects (including another magnet), so be careful when you are trying separte them !If you have any questions please contact us freely!
- See more on Amazon...
Brand: LOVIMAG | Manufacturer: LOVIMAG
See On Amazon #6
DIYMAG Magnets with Hole, 100LBS Heavy Duty Neodymium Round Base Cup Magnets for Wall, Rare Earth Magnets with Countersunk Hole and Stainless Screws for Hanging, Office, Craft-Dia 1.26 inch-Pack of 6
Asin: B08VMWZ54T
Unlimited Applications: Round Magnets With Hole Can Be Bolted To Any Non-Metallic Surface Using The Self-Tapping Screws Included In The Package, Like: Wood Desk, Door, And Plastic Board. Holding, Picture Hanging, Mounting And Much More..
Diymag Brand : We Have Staffed With A Team Of Experienced Professionals In Rare Earth Neodymium Magnets And Magnetic Assemblies. As A Provider Of Strategic Supply, We Have The Unique Capability To Meet The Requests Of All Of Our Customers..
Quality Guaranteed: Made Under Iso 9001 Quality Systems. The Highest Quality Available!.
Very Durable: These Cup Magnets With Countersunk Hole Will Not Break In Normal Use Since The Magnets Are Protected Inside The Steel Cups Which Greatly Increase The Longevity Of The Round Strong Magnets..
Features
- VERY POWERFUL : Made of Strong Neodymium Magnet, Unbelievable Holding Power for the Size, Up to 100 Pound Holding Power per Magnet.
- VERY DURABLE: These Cup magnets with Countersunk Hole will not Break in Normal Use since the Magnets are Protected inside the Steel Cups which Greatly Increase the Longevity of the Round Strong Magnets.
- UNLIMITED APPLICATIONS: Round Magnets with hole can be bolted to any non-metallic surface using the self-tapping screws included in the package, like: wood desk, door, and plastic board. Holding, Picture Hanging, Mounting and Much More.
- QUALITY GUARANTEED: Made under ISO 9001 Quality Systems. The Highest Quality Available!
- DIYMAG BRAND : We have staffed with a team of experienced professionals in Rare Earth Neodymium Magnets and Magnetic Assemblies. As a provider of strategic supply, we have the unique capability to meet the requests of all of our customers.
- See more on Amazon...
Brand: DIYMAG | Manufacturer: DIYMAG
See On Amazon #7
LOVIMAG Magnets,150lb+ Waterproof Strong Neodymium Magnet with Hole for Wall Mounting,Strong Rare Earth Cup Magnets with Heavy Duty Countersunk Hole and Screws for Tool Room,Workplace(Black, 10 Pack)
Asin: B0CD7BPLY7
【Very Sturable】This Heavy Duty Magnets Is Made Of Precision Mechanical Vehicles And These Magnets Will Not Break In Normal Use Since The Magnets Are Protected Inside The Steel Cups Which Greatly Increase The Longevity Of The Magnets. Smooth Surface And One-Off Appearance Reduce Your Unnecessary Troubles..
【Professional Service】We Are A Magnet Supplier With Professional Strength. You Can Certainly Find Strong Cup Magnets With Holes You Want In My Shop! If You Need Mass Customization Of Rare Earth Magnets Heavy Duty, Contact Us And We Can Meet Your Needs..
【Extensive Use】These Neodymium Cup Magnets With Heavy Duty Countersunk Hole And Six Free Screws Can Be Used In A Variety Of Life Scenarios,Perfect For Handy Assembly For Home, Business And Schools! Holding, Lifting,Wall Mounting, Fishing, Closing, Retrieving,Cabinet, Blackboard And Refrigerator And Much More, Use It With Our Accessories Which Brings Different Gravitational Experience To Your Life..
【Strong Powerful】These 1.42 Inches Strong Round Base Magnets Made Of Neodymium Rare Earth Magnetic Materia,Unbelievable Holding Power For The Size, Per Strong Rare Earth Magnet Can Up To 150 Pound Holding Power, Fit Most Of The Uses In Your Life..
Features
- MAGNETS COATED Strong neodymium magnets with holes are coated with three layers of black epoxy+ nickel+ copper, so they provides a shiny and rust resistant protection for strong magnets heavy duty.
- STRONG POWERFUL These 1.42 inches strong round base magnets made of neodymium rare earth magnetic materia,unbelievable holding power for the size, per strong rare earth magnet can up to 150 pound holding power, fit most of the uses in your life.
- VERY STURABLE This heavy duty magnets is made of precision mechanical vehicles and these magnets will not break in normal use since the magnets are protected inside the steel cups which greatly increase the longevity of the magnets. Smooth surface and one-off appearance reduce your unnecessary troubles.
- EXTENSIVE USE These neodymium cup magnets with heavy duty countersunk hole and six free screws can be used in a variety of life scenarios,Perfect for handy assembly for home, business and schools! Holding, lifting,wall mounting, fishing, closing, retrieving,cabinet, blackboard and refrigerator and much more, Use it with our accessories which brings different gravitational experience to your life.
- PROFESSIONAL SERVICE We are a magnet supplier with professional strength. You can certainly find strong cup magnets with holes you want in my shop! If you need mass customization of rare earth magnets heavy duty, contact us and we can meet your needs.
- See more on Amazon...
Brand: LOVIMAG | Manufacturer: LOVIMAG
Weight: 1.17 pounds
See On Amazon #8
DIYMAG Neodymium Magnets with Hole, 100LBS Heavy Duty Round Base Cup Magnets for Wall, Rare Earth Magnets with Countersunk Hole and Stainless Screws for Hanging, Office, Craft-Dia 1.26 inch-Pack of 8
Asin: B07FL7NCYN | Ean: 4690740642446
Unlimited Applications: Round Magnets With Hole Can Be Bolted To Any Non-Metallic Surface Using The Self-Tapping Screws Included In The Package, Like: Wood Desk, Door, And Plastic Board. Holding, Picture Hanging, Mounting And Much More..
Diymag Brand : We Have Staffed With A Team Of Experienced Professionals In Rare Earth Neodymium Magnets And Magnetic Assemblies. As A Provider Of Strategic Supply, We Have The Unique Capability To Meet The Requests Of All Of Our Customers..
Quality Guaranteed: Made Under Iso 9001 Quality Systems. The Highest Quality Available!.
Very Durable: These Cup Magnets With Countersunk Hole Will Not Break In Normal Use Since The Magnets Are Protected Inside The Steel Cups Which Greatly Increase The Longevity Of The Round Strong Magnets..
Features
- VERY POWERFUL : Made of Strong Neodymium Magnet, Unbelievable Holding Power for the Size, Up to 100 Pound Holding Power per Magnet.
- VERY DURABLE: These Cup magnets with Countersunk Hole will not Break in Normal Use since the Magnets are Protected inside the Steel Cups which Greatly Increase the Longevity of the Round Strong Magnets.
- UNLIMITED APPLICATIONS: Round Magnets with hole can be bolted to any non-metallic surface using the self-tapping screws included in the package, like: wood desk, door, and plastic board. Holding, Picture Hanging, Mounting and Much More.
- QUALITY GUARANTEED: Made under ISO 9001 Quality Systems. The Highest Quality Available!
- DIYMAG BRAND : We have staffed with a team of experienced professionals in Rare Earth Neodymium Magnets and Magnetic Assemblies. As a provider of strategic supply, we have the unique capability to meet the requests of all of our customers.
- See more on Amazon...
Brand: DIYMAG | Manufacturer: DIYMAG
See On Amazon #9
MIKEDE Strong Magnets with Hole, 100LB+ Heavy Duty Neodymium Cup Magnets with Stainless Screw for Wall Mounting, Rare Earth Round Base Magnets, Black Pot Magnets for Tools, 1.26"D x 0.2"H - 6 Pack
Asin: B0CD9MD5N5
【Easy To Install】- These Countersunk Hole Magnetic Discs For Easy Use With 6 Screw(Included), Which Makes You Able To Use Them In Two Different Ways. You Can Not Only Use These Industrial Magnets On Metallic Items, Also On Non-Metallic Items. The Neodymium Cup Magnets With Countersunk Center Hole That Is Perfect For Mounting With A Flat Head Screw Or Bolt.
【Professional Brand】- Made Under Iso 9001 Quality Systems. We Are Professional Neodymium Cup Magnets Seller And You Can Find Any Magnets You Want In Our Store. Search Mikede Magnets. Find The Strong Magnets You Want!.
【Useful Magnetic Tools】- These Strong Industrial Cup Magnets Are Great Above The Workbench To Hold Tools That You Use Consistently, So They Are Within Easy Reach. The Heavy Duty Neodymium Cup Magnets Will Hold Up Some Of Your Heavier Hand Tools Quite Well And Very Easily. Perfect For Organizing And Hanging In Workshop, And Decluttering Your Home, Garage, Business And Schools. Holding, Lifting, Fishing, Closing, Retrieving, And Much More.
【More Sturdy Than Others】- These Countersunk Magnets With Hole Are Made Of Ndfeb Material With A Nickel-Plated Coat For Maximum Durability And Protection Against Corrosion. Steel Cups Protects Magnets From Breaking Which Greatly Increase The Longevity Of The Rare Earth Cup Magnets.
Features
- Powerful Magnetic Force - Our neodymium round base disc magnets are made of rare earth neodymium metal material, which makes their magnetism very strong.
- More Sturdy than Others - These countersunk magnets with hole are made of NdFeB material with a nickel-plated coat for maximum durability and protection against corrosion. Steel cups protects magnets from breaking which greatly increase the longevity of the rare earth cup magnets
- Easy to Install - These countersunk hole magnetic discs for easy use with 6 screw(Included), which makes you able to use them in two different ways. You can not only use these industrial magnets on metallic items, also on non-metallic items. The neodymium cup magnets with countersunk center hole that is perfect for mounting with a flat head screw or bolt
- Useful Magnetic Tools - These strong industrial cup magnets are great above the workbench to hold tools that you use consistently, so they are within easy reach. The heavy duty neodymium cup magnets will hold up some of your heavier hand tools quite well and very easily. Perfect for organizing and hanging in workshop, and decluttering your home, garage, business and schools. Holding, Lifting, Fishing, Closing, Retrieving, and much more
- Professional Brand - Made under ISO 9001 Quality Systems. We are professional neodymium cup magnets seller and you can find any magnets you want in our store. Search MIKEDE MAGNETS. Find the strong magnets you want!
- See more on Amazon...
Brand: MIKEDE | Manufacturer: MIKEDE
See On Amazon #10
LOVIMAG Magnets,110lb+ Strong Neodymium Cup Magnets with Screws for Wall Mounting,Heavy Duty Rare Earth Magnets Round Base Magnet with Countersunk Hole for Holding Tools Lifting, Hanging-Pack of 12
Asin: B0CF9YPVKC
【Very Sturable】This Heavy Duty Cup Magnets Is Made Of Precision Mechanical Vehicles And These Magnets Will Not Break In Normal Use Since The Magnets Are Protected Inside The Steel Cups Which Greatly Increase The Longevity Of The Magnets. Smooth Surface And One-Off Appearance Reduce Your Unnecessary Troubles..
【Professional Service】We Are A Magnet Supplier With Professional Strength. You Can Certainly Find Strong Cup Magnets With Holes You Want In My Shop! If You Need Mass Customization Of Rare Earth Magnets Heavy Duty, Contact Us And We Can Meet Your Needs..
【Extensive Use】：These Neodymium Cup Magnets With Heavy Duty Countersunk Hole And Six Free Screws And Six Double Sided Adhensive Tapes Can Be Used In A Variety Of Life Scenarios,Perfect For Handy Assembly For Home, Business And Schools! Holding, Lifting,Wall Mounting, Fishing, Closing, Retrieving,Cabinet, Blackboard And Refrigerator And Much More, Use It With Our Accessories Which Brings Different Gravitational Experience To Your Life..
【Strong Powerful】 These 1.26 Inches Strong Round Base Magnets Made Of Neodymium Rare Earth Magnetic Materia,Unbelievable Holding Power For The Size, Per Strong Rare Earth Magnet Can Up To 110 Pound Holding Power, Fit Most Of The Uses In Your Life..
Features
- MAGNETS COATED : Strong neodymium cup magnets with holes have Ni+Cu+Ni Triple Layer Coated. The Best Coating Available, which Provides a Shiny and Rust Resistant Protection for the Magnets.
- STRONG POWERFUL These 1.26 inches strong round base magnets made of neodymium rare earth magnetic materia,unbelievable holding power for the size, per strong rare earth magnet can up to 110 pound holding power, fit most of the uses in your life.
- VERY STURABLE This heavy duty cup magnets is made of precision mechanical vehicles and these magnets will not break in normal use since the magnets are protected inside the steel cups which greatly increase the longevity of the magnets. Smooth surface and one-off appearance reduce your unnecessary troubles.
- EXTENSIVE USE These neodymium cup magnets with heavy duty countersunk hole and six free screws and six double sided adhensive tapes can be used in a variety of life scenarios,Perfect for Handy Assembly for Home, Business and Schools! Holding, Lifting,Wall mounting, Fishing, Closing, Retrieving,cabinet, blackboard and refrigerator and much more, Use it with our accessories which brings different gravitational experience to your life.
- PROFESSIONAL SERVICE We are a magnet supplier with professional strength. You can certainly find strong cup magnets with holes you want in my shop! If you need mass customization of rare earth magnets heavy duty, contact us and we can meet your needs.
- See more on Amazon...
Brand: LOVIMAG | Manufacturer: LOVIMAG
See On Amazon #11
ULIBERMAGNET 4Pack Anti-Scratch Neodymium Magnet with Rubber Coated and M6 Male Thread,Super Strong Magnetic Mounting for Lighting,Camera,Tools and equipement
Asin: B0923LLS6N | Model: ULI-D3206M600WAI | PartNumber: ULI-D3206M600WAI | Ean: 0756166527645 | UPC: 756166527645
【Much More Compatible Neodymium Cup Magnet With Stud】: M6 Standard Male Thread Stud,Much More Compatible For Kinds Of Hardware Assembly. Great For Camera Bracket, , Video, Display Panel , Automatic Equipment, Tools And Machines.
【Package Includes Of Magnet With Male Thread】: 4Pcs Rubber Coated Magnet 26Lb +M6 Spring Washer+M6 Flat Washer+Nut Included.
【Good Corrosion-Resistance Of Rubber Coated Neodymium Magnet】: Ni+Cu+Ni Triple Layer Good Corrosion-Resistance Coating, The Exterior Rubber Coating Nearly Water-Proof Perfect For Using In Outdoors..
【No Scratch And Bigger Friction Of Mounting Magnet】: The Soft Rubber Can Protect The Magnet From Damage , Avoid Scratch Of Painting Surface And Limit Slipping The Magnet On Smooth Surface..
Features
- Much Stronger of Neodymium Rubber Coated Magnet : 26lb Vertical Magnetic Pull Force On Base of 0.33''(10mm) Thickness Steel Plate due to Neodymium Magnet N42 and Special Magnetic Circuit .
- No scratch and bigger friction of mounting magnet : The Soft rubber can protect the magnet from damage , avoid scratch of painting surface and limit slipping the magnet on smooth surface.
- Much More Compatible Neodymium Cup Magnet with stud : M6 standard male thread stud,much more compatible for kinds of hardware assembly. Great for camera bracket, , video, display panel , automatic equipment, tools and machines
- Good Corrosion-Resistance of Rubber Coated Neodymium Magnet : Ni+Cu+Ni Triple Layer good corrosion-resistance coating, the exterior rubber coating nearly water-proof perfect for using in outdoors.
- Package Includes of magnet with male thread : 4pcs Rubber Coated Magnet 26lb +M6 Spring Washer+M6 Flat Washer+Nut included
- See more on Amazon...
Brand: ULIBERMAGNET | Manufacturer: Ningbo qi yi guang dian ke ji you xian gong si
See On Amazon #12
VNDUEEY Magnets with Holes, Strong Rare Earth Magnets, 16 Pack 40LBS Neodymium Cup Magnets with Stainless Screws for Wall Mounting, Round Base Disc Magnet for for Kitchen, Office, Workplace, DIY Craft
Asin: B0BHYZPZL7
【Portable Size】The Size Of The Cup Magnets Is 0.79 Inch (Diameter) X 0.19 Inch (Height). Strong Magnets Is Made Of N52 Neodymium Magnets Material. Each Powerful Rare Earth Magnet Can Hold Up To 40 Pounds, Which Is Stronger Than Other Magnets..
【Professional Service】We Are A Professional Magnet Supplier. You Can Find Any Magnet You Need In Our Shop. If You Have Any Questions About The Magnets, Please Contact Us And We Will Solve The Question For You Within 24 Hours..
【Sturdy Coated】The Round Base Magnets Has Three Layers Of Ni+Cu+Ni Coating. The Best Coating Provides The Magnets With Brightness, Rust Protection And Mirror-Like Finish Surface. Rare Earth Magnets Heavy Duty Has Excellent Corrosion Resistance..
【Durable Magnets】These Strong Magnets Heavy Duty Are Protected In The Steel Cup And Will Not Break In Normal Use, Which Greatly Increases The Life Of The Cup Magnets. Each Magnet Neodymium Is Equipped With A 0.59In/15Mm Length Stainless Screw..
Features
- EXTENSIVE USE The strong neodymium cup magnets with hole can be fixed on any non-metallic surface with the self tapping screws included in the package, such as wooden surface, stone wall and plastic plate, which is very suitable for DIY crafts. The rare earth magnets are very great for hanging garage tools, kitchen utensils, keys and other items.
- DURABLE MAGNETS These strong magnets heavy duty are protected in the steel cup and will not break in normal use, which greatly increases the life of the cup magnets. Each magnet neodymium is equipped with a 0.59in/15mm length stainless screw.
- PORTABLE SIZE The size of the cup magnets is 0.79 inch (diameter) x 0.19 inch (height). Strong magnets is made of N52 neodymium magnets material. Each powerful rare earth magnet can hold up to 40 pounds, which is stronger than other magnets.
- STURDY COATED The round base magnets has three layers of Ni+Cu+Ni coating. The best coating provides the magnets with brightness, rust protection and mirror-like finish surface. Rare earth magnets heavy duty has excellent corrosion resistance.
- PROFESSIONAL SERVICE We are a professional magnet supplier. You can find any magnet you need in our shop. If you have any questions about the magnets, please contact us and we will solve the question for you within 24 hours.
- See more on Amazon...
Brand: VNDUEEY | Manufacturer: VNDUEEY
Dimensions: 0.19 x 0.79 x 0.79 Inches
See On Amazon #13
TRYMAG Magnets with Holes, 3 Pack Black Rare Earth Magnets with Adhesive Backing, 110lbs Strong Neodymium Cup Magnets with Screws for Wall Mounting, Industrial Strong Magnets for Holding Tools Lifting
Asin: B0CFFJMDMW
【Easy To Install】- Installation Is A Simple Matter With Our Countersunk Hole Magnetic Discs. 24 Mounting Screws Are Included, Making It Easy To Use Them In Two Different Ways. These Industrial Magnets Can Be Used On Metallic Items As Well As Non-Metallic Items. The Neodymium Cup Magnets Have A Countersunk Center Hole That Is Perfectly Designed For Mounting With A Flat Head Screw Or Bolt..
【Professional Brand】-We Are Professional Neodymium Cup Magnets Seller And You Can Find Any Magnets You Want In Our Store. We Are A Magnet Supplier With Professional Strength. You Can Certainly Find Strong Cup Magnets With Holes You Want In My Shop! If You Need Mass Customization Of Rare Earth Magnets Heavy Duty, Contact Us And We Can Meet Your Needs..
【Wide Useful】- These Neodymium Cup Magnets With Heavy Duty Countersunk Hole And Screws And Sided Adhensive Tapes Can Be Used In A Variety Of Life Scenarios.Perfect For Organizing And Hanging In Workshop, And Decluttering Your Home, Garage, Business And Schools. Holding, Lifting, Fishing, Closing, Retrieving, And Much More..
【Perfect Coating 】- These 1.26 Inches Strong Round Base Magnets With Holes Are Coated With Three Layers Of Black Epoxy+ Nickel+ Copper, They Provides A Shiny And Rust Resistant Protection For Strong Magnets Heavy Duty. Per Strong Rare Earth Magnet Can Up To 110 Pound Holding Power..
Features
- Heavy Duty Rare Earth Magnets - These strong magnets with hole are made of NdFeB material with a nickel-plated coat for maximum durability and protection against corrosion. Steel cups protects magnets from breaking which greatly increase the longevity of the neodymium magnets.
- Perfect Coating - These 1.26 inches strong round base magnets with holes are coated with three layers of black epoxy+ nickel+ copper, they provides a shiny and rust resistant protection for strong magnets heavy duty. Per strong rare earth magnet can up to 110 pound holding power.
- Easy to Install - Installation is a simple matter with our Countersunk Hole Magnetic Discs. 24 mounting screws are included, making it easy to use them in two different ways. These industrial magnets can be used on metallic items as well as non-metallic items. The Neodymium cup magnets have a countersunk center hole that is perfectly designed for mounting with a flat head screw or bolt.
- Wide Useful - These neodymium cup magnets with heavy duty countersunk hole and screws and sided adhensive tapes can be used in a variety of life scenarios.Perfect for organizing and hanging in workshop, and decluttering your home, garage, business and schools. Holding, Lifting, Fishing, Closing, Retrieving, and much more.
- Professional Brand -We are professional neodymium cup magnets seller and you can find any magnets you want in our store. We are a magnet supplier with professional strength. You can certainly find strong cup magnets with holes you want in my shop! If you need mass customization of rare earth magnets heavy duty, contact us and we can meet your needs.
- See more on Amazon...
Brand: TRYMAG | Manufacturer: TRYMAG
See On Amazon #14
MIKEDE Strong Magnets with Hole, 100lb Heavy Duty Neodymium Magnets with Stainless Screws for Wall Mounting, Rare Earth Magnets Round Base Cup Magnets for Tool Room,Workplace, 1.26"D x 0.24"H, 12 Pack
Asin: B0CHRVN4K9
【Easy To Install】- Installation Is A Simple Matter With Our Countersunk Hole Magnetic Discs. 24 Mounting Screws Are Included, Making It Easy To Use Them In Two Different Ways. These Industrial Magnets Can Be Used On Metallic Items As Well As Non-Metallic Items. The Neodymium Cup Magnets Have A Countersunk Center Hole That Is Perfectly Designed For Mounting With A Flat Head Screw Or Bolt..
【Professional Brand】- Made Under Iso 9001 Quality Systems. We Are Professional Neodymium Cup Magnets Seller And You Can Find Any Magnets You Want In Our Store. Search Mikede Magnets. Find The Strong Magnets You Want! Choose A Professional Brand For Your Magnetic Needs!.
【Useful Small Magnetic Tools】- These Heavy Duty Strong Magnets Are Great Above The Workbench To Hold Tools That You Use Consistently, So They Are Within Easy Reach. The Powerful Neodymium Cup Magnets Will Hold Up Some Of Your Heavier Hand Tools Quite Well And Very Easily. Perfect For Organizing And Hanging In Workshop, And Decluttering Your Home, Garage, Business And Schools. Holding, Lifting, Fishing, Closing, Retrieving, And Much More.
【Heavy Duty Rare Earth Magnets 】- These Strong Magnets With Hole Are Made Of Ndfeb Material With A Nickel-Plated Coat For Maximum Durability And Protection Against Corrosion. Steel Cups Protects Magnets From Breaking Which Greatly Increase The Longevity Of The Neodymium Magnets.
Features
- Powerful Magnetic Force - Our neodymium round base disc magnets are made of rare earth neodymium metal material, which makes their magnetism very strong. Each round magnet is 1.26 inch (32mm) in DIAMETER and 0.24 inch (6mm) in HEIGHT. PULL FORCE: 100 LBS+ (Vertical)
- Heavy Duty Rare Earth Magnets - These strong magnets with hole are made of NdFeB material with a nickel-plated coat for maximum durability and protection against corrosion. Steel cups protects magnets from breaking which greatly increase the longevity of the neodymium magnets
- Easy to Install - Installation is a simple matter with our Countersunk Hole Magnetic Discs. 24 mounting screws are included, making it easy to use them in two different ways. These industrial magnets can be used on metallic items as well as non-metallic items. The Neodymium cup magnets have a countersunk center hole that is perfectly designed for mounting with a flat head screw or bolt.
- Useful Small Magnetic Tools - These heavy duty strong magnets are great above the workbench to hold tools that you use consistently, so they are within easy reach. The powerful neodymium cup magnets will hold up some of your heavier hand tools quite well and very easily. Perfect for organizing and hanging in workshop, and decluttering your home, garage, business and schools. Holding, Lifting, Fishing, Closing, Retrieving, and much more
- Professional Brand - Made under ISO 9001 Quality Systems. We are professional neodymium cup magnets seller and you can find any magnets you want in our store. Search MIKEDE MAGNETS. Find the strong magnets you want! Choose a Professional Brand for Your Magnetic Needs!
- See more on Amazon...
Brand: MIKEDE | Manufacturer: MIKEDE
See On Amazon #15
MIKEDE 110LB Strong Magnets Heavy Duty, Black Neodymium Cup Magnets with Countersunk Hole, Stainless Screws for Wall Mounting, Rare Earth Magnets Round Base Disc Magnets 1.26"D x 0.2"H - 10 Pack
Asin: B0CZ6YL1HN
【Flexible Installation】With A Countersunk Hole Design And Provided Screws, Our Neodymium Cup Magnets With 10 Screws(Included) Offer Versatile Installation Options For Both Metallic And Non-Metallic Surfaces, Providing Convenience And Adaptability..
【Professional Quality】Manufactured Under Iso 9001 Quality Systems, Our Strong Pot Magnets Reflect Our Commitment To Excellence As A Professional Neodymium Magnets Seller. Visit Mikede Magnets To Explore Our Wide Range Of Magnet Options..
【Essential Magnetic Tools】Our Industrial Strength Magnets Heavy Duty Provide A Convenient Storage Solution. Additionally, Their Strong Magnetism Enables Them To Securely Hold Metal Tools With Ease. Whether In Workshops Or Garages, These Magnets With Countersunk Holes Excel At Organization..
【Unmatched Durability】These Countersunk Magnets With Hole Are Made Of Ndfeb Material With A Nickel-Plated Coat For Maximum Durability And Protection Against Corrosion. Steel Cups Protects Magnets From Breaking Which Greatly Increase The Longevity Of The Rare Earth Cup Magnets..
Features
- POWERFUL MAGNETIC FORCE Our round base disc magnets are made of rare earth neodymium metal material, which makes their magnetism very strong.Our heavy duty magnets with holes provide 110lbs holding power, ensuring secure placement of various items for practical.
- UNMATCHED DURABILITY These countersunk magnets with hole are made of NdFeB material with a nickel-plated coat for maximum durability and protection against corrosion. Steel cups protects magnets from breaking which greatly increase the longevity of the rare earth cup magnets.
- FLEXIBLE INSTALLATION With a countersunk hole design and provided screws, our neodymium cup magnets with 10 screws(Included) offer versatile installation options for both metallic and non-metallic surfaces, providing convenience and adaptability.
- ESSENTIAL MAGNETIC TOOLS Our industrial strength magnets heavy duty provide a convenient storage solution. Additionally, their strong magnetism enables them to securely hold metal tools with ease. Whether in workshops or garages, these magnets with countersunk holes excel at organization.
- PROFESSIONAL QUALITY Manufactured under ISO 9001 Quality Systems, our strong pot magnets reflect our commitment to excellence as a professional neodymium magnets seller. Visit MIKEDE MAGNETS to explore our wide range of magnet options.
- See more on Amazon...
Brand: MIKEDE | Manufacturer: MIKEDE
See On Amazon #16
DIYMAG 4Pcs 110 lb 1.26 inch Neodymium Round Base Cup Magnet,Strong Rare Earth Magnets with Heavy Duty Countersunk Hole and Stainless Screws for Refrigerator Magnets Office Craft (Silver)
Asin: B0CDR58Y22
【Very Durable】These Strong Magnets With Hole Are Made Of Ndfeb Material With A Nickel-Plated Coat For Maximum Durability And Protection Against Corrosion. And This Heavy Duty Cup Magnets Is Made Of Precision Mechanical Vehicles And These Magnets Will Not Break In Normal Use Since The Magnets Are Protected Inside The Steel Cups Which Greatly Increase The Longevity Of The Magnets.
【Diymag Brand】 We Have Staffed With A Team Of Experienced Professionals In Rare Earth Neodymium Magnets And Magnetic Assemblies. As A Provider Of Strategic Supply, We Have The Unique Capability To Meet The Requests Of All Of Our Customers. If You Need Mass Customization Of Rare Earth Magnets Heavy Duty, Contact Us And We Can Meet Your Needs.
【Multifunctional Use】The Neodymium Cup Magnets Can Be Used In Various Life Scenarios, Making Them Very Suitable For Convenient Assembly In Homes, Businesses, And Schools! The Powerful Neodymium Cup Magnets Will Hold Up Some Of Your Heavier Hand Tools Quite Well And Very Easily. Perfect For Organizing And Hanging In Workshop, And Decluttering Your Home, Garage, Business And Schools. Holding, Lifting, Fishing, Closing, Retrieving, And Much More.
【Strong Powerful】These 1.26 Inches Strong Round Base Magnets Made Of Neodymium Rare Earth Magnetic Materia, Each Of These Powerful 1.26-Inch Round Base Magnets Possesses 110Lb Of Magnetic Force. Made Of Diymag's Industrial-Grade High-Power Magnet And Steel, It Can Hold Steel Tools Firmly Without Worrying Magnets Breaking.
Features
- Magnets with Holes Set The set includes 4 strong neodymium cup magnets with holes and 8 adapter screws. Neodymium cup magnets are coated with three layers of epoxy+ nickel+ copper, so they provides a shiny and rust resistant protection for strong magnets heavy duty
- Strong Powerful These 1.26 inches strong round base magnets made of neodymium rare earth magnetic materia, each of these powerful 1.26-inch round base magnets possesses 110lb of magnetic force. Made of DIYMAG's industrial-grade high-power magnet and steel, it can hold steel tools firmly without worrying magnets breaking
- Very Durable These strong magnets with hole are made of NdFeB material with a nickel-plated coat for maximum durability and protection against corrosion. And this heavy duty cup magnets is made of precision mechanical vehicles and these magnets will not break in normal use since the magnets are protected inside the steel cups which greatly increase the longevity of the magnets
- Multifunctional Use The neodymium cup magnets can be used in various life scenarios, making them very suitable for convenient assembly in homes, businesses, and schools! The powerful neodymium cup magnets will hold up some of your heavier hand tools quite well and very easily. Perfect for organizing and hanging in workshop, and decluttering your home, garage, business and schools. Holding, Lifting, Fishing, Closing, Retrieving, and much more
- DIYMAG Brand We have staffed with a team of experienced professionals in Rare Earth Neodymium Magnets and Magnetic Assemblies. As a provider of strategic supply, we have the unique capability to meet the requests of all of our customers. If you need mass customization of rare earth magnets heavy duty, contact us and we can meet your needs
- See more on Amazon...
Brand: DIYMAG | Manufacturer: DIYMAG
See On Amazon #17
Learay 6 Pack Rubber Coated Magnets, 26LBS Neodymium Magnet Base with M6 Threaded Studs, Strong Mounting Magnets Stud Magnet Black Rare Earth Magnets for Light Bar Mirror Camera Tool
Asin: B0B6G14NYM | Model: 2022D43M4006 | PartNumber: 2022D43M4006
🌊M4 Female Threaded Studs Much More Compatible - Rubber-Coated Neodymium Magnet Is Adopted As Standard M6 Male Thread Stud, Which Is Compatible With Many Kinds Of Hardware Assembly. Anti-Loose Screw Nut With Non-Slip Rubber Layer Inside Is More Convenient..
🌊Easy To Install - Directly Screw Into The Threaded Hole Of The Fixed Object, Our Black Mounting Magnets Are Fit For Installing Camera Bracket, Video Recorder Bracket, Light Bar, Hardware Equipment Or Other Tools..
🌊Waterproof For Outdoor Use - The Rubber-Coated Stud Magnets Consist Of Ndfeb Magnets With Strong Magnetic Property, Ni And Rubber Triple-Layer, The Exterior Rubber Coating Is Waterproof & Wear-Resistant For Outdoor Use..
🌊Much Stronger Neodymium Rubber Coated Magnet - D43 Mounting Magnets Are Coated With Rubber To Protect Inside Magnets From Splitting, Avoid Scratching And Slipping On Smooth Surfaces, Especially Enhance The Bearing Capacity Of Lateral Load..
Features
- Large & Heavy-duty Magnets - D43 rubber coated round base is measured 1.69" in diameter, and it is equipped with 6 pieces of neodymium magnets inside, has a vertical magnetic pull force of 26LBS on base of steel plate.
- Much Stronger Neodymium Rubber Coated Magnet - D43 mounting magnets are coated with rubber to protect inside magnets from splitting, avoid scratching and slipping on smooth surfaces, especially enhance the bearing capacity of lateral load.
- M4 Female Threaded Studs Much More Compatible - Rubber-coated neodymium magnet is adopted as standard M6 male thread stud, which is compatible with many kinds of hardware assembly. Anti-loose Screw Nut with non-slip rubber layer inside is more convenient.
- Waterproof for Outdoor Use - The rubber-coated stud magnets consist of NdFeB magnets with strong magnetic property, Ni and rubber triple-layer, the exterior rubber coating is waterproof & wear-resistant for outdoor use.
- Easy to Install - Directly screw into the threaded hole of the fixed object, our black mounting magnets are fit for installing camera bracket, video recorder bracket, light bar, hardware equipment or other tools.
- See more on Amazon...
Brand: Learay | Manufacturer: Learay
See On Amazon #18
SMARTAKE 10-Pack Neodymium Round Base Cup Magnets, 30LBS Strong Rare Earth Magnets with Heavy Duty Countersunk Hole and Stainless Screws for Refrigerator, Craft, Home, Office - 1.26'' x 0.2'' (Black)
Asin: B0967W4THW | Model: IS054D | PartNumber: IS054D
Wide Application - They Can Be Used As Industrial Magnets, Refrigerator Magnets, Whiteboard Magnets, Tools Organizer, Kitchenware Holder, Ideal For Diy Projects, Science Experiments, Building, Arts, Crafts, Perfect For Organizing Your Indoor Or Outdoor Items In Home, Kitchen, Garage, Office, Conference Room, School, Classroom, Etc..
Use It With Care - Powerful Magnets May Hurt Your Fingers! Although Each Two Magnets Are Equipped With A Spacer In Between To Avoid Scratches And Help You Separate The Magnets Easier, We Still Need To Remind You To Be Very Careful When You Are Trying To Separate Them! It Is Forbidden To Collide Them With Other Metal Objects (Including Another Magnet)..
Easy To Use - Package Includes 10 Cup Magnets And 10 Stainless Screws, Which Makes You Able To Use Them In Two Different Ways. If You Don't Want To Drill Holes, You Can Use Them On Magnetic Surfaces So That It Won’T Hurt Your Wall. You Can Also Use Them On Non-Magnetic Surface Or Wall With Screws By Drilling Holes, Which Also Will Make Them Sturdier..
Super Durable - These Countersunk Hole Magnetic Discs Are Made Of Ndfeb Material With An Epoxy-Plated Coat, Which Provides A Smooth Exterior, Reduces Its Corrosion And Greatly Increases The Durability Of The Magnets. But Please Use Them Carefully To Avoid Breaking And Ensure Long Service Life..
Features
- POWERFUL MAGNETS - Our cup magnets are made of rare earth neodymium metal material, which makes their magnetism very strong. Each magnet is 1.26 inch (32 mm) in diameter and 0.2 inch (5 mm) in height. Despite of its small size, each magnet is able to hold up to 30 LBS vertically when in flush contact with a mild steel surface.
- SUPER DURABLE - These countersunk hole magnetic discs are made of NdFeB material with an epoxy-plated coat, which provides a smooth exterior, reduces its corrosion and greatly increases the durability of the magnets. But please use them carefully to avoid breaking and ensure long service life.
- WIDE APPLICATION - They can be used as industrial magnets, refrigerator magnets, whiteboard magnets, tools organizer, kitchenware holder, ideal for DIY projects, science experiments, building, arts, crafts, perfect for organizing your indoor or outdoor items in home, kitchen, garage, office, conference room, school, classroom, etc.
- EASY TO USE - Package includes 10 cup magnets and 10 stainless screws, which makes you able to use them in two different ways. If you don't want to drill holes, you can use them on magnetic surfaces so that it won t hurt your wall. You can also use them on non-magnetic surface or wall with screws by drilling holes, which also will make them sturdier.
- USE IT WITH CARE - POWERFUL MAGNETS MAY HURT YOUR FINGERS! Although each two magnets are equipped with a spacer in between to avoid scratches and help you separate the magnets easier, we still need to remind you to BE VERY CAREFUL when you are trying to separate them! It is forbidden to collide them with other metal objects (including another magnet).
- See more on Amazon...
Brand: SMARTAKE | Manufacturer: SMARTAKE
See On Amazon #19
DIYMAG Neodymium Round Base Magnet with Mounting Screws, Strong, Permanent, Rare Earth Magnets. DIY, Building, Scientific and Craft Pot Magnets, 1.26 inch 32mm , Pack of 4
Asin: B0D2QV6V9Y | Model: HLMAG05 | PartNumber: HLMAG05
Magnets Dimensions - Diameter 32Mm X Thick 6Mm (Approx. 1.26" X 0.23" ). Tolerances: ±0.2Mm X ±0.2Mm..
Quality Guaranteed - Made Under Iso 9001 Quality Systems. The Highest Quality Available! 30 Days Money Back Guaranteed!.
Diy Projects & Science Experiments - Refrigerator Magnets, Shower Door, Work Or Office, Scientific Purposes, Arts And Crafts Or School Classroom..
Powerful Magnets - Made Of Strong Neodymium Magnet, Unbelievable Holding Power For The Size, Up To 110 Pound Holding Power Per Magnet..
Features
- VERY DURABLE - These Magnets will not Break in Normal Use since the Magnets are Protected inside the Steel Cups which Greatly Increase the Longevity of the Magnets.
- POWERFUL MAGNETS - Made of Strong Neodymium Magnet, Unbelievable Holding Power for the Size, Up to 110 Pound Holding Power per Magnet.
- MAGNETS DIMENSIONS - Diameter 32mm x Thick 6mm (approx. 1.26 x 0.23 ). Tolerances: 0.2mm x 0.2mm.
- DIY PROJECTS & SCIENCE EXPERIMENTS - Refrigerator Magnets, Shower Door, Work or Office, Scientific Purposes, Arts and Crafts or School Classroom.
- QUALITY GUARANTEED - Made under ISO 9001 Quality Systems. The Highest Quality Available! 30 Days Money Back Guaranteed!
- See more on Amazon...
Brand: DIYMAG | Manufacturer: DIYMAG
Dimensions: 0.20 x 1.20 x 1.20 inches
See On Amazon
Looking For Something Else?
Search