maXpeedingrods Coilover Adjustable for Toyota Celica 1989-1999, 24 Levels Damper Adjustable Coilovers Suspension Kit, Coil Spring Shock Absorber Lowering Kits T6 Upgrade Coilovers Struts
Asin: B0B2RG4SFQ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【24 Rebound Force Levels For More Control】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
【Lowering Kits】 The Height Adjustable By 1-3 Inches, Allowing You To Have A More Aggressive Stance. This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Struts Will "Lower Your Car" And Does Not Keep To Original Ride Height..
【Spring Rate】 Front Spring Rate: 10 Kg/Mm (560 Lbs/In) & Rear Spring Rate: 6Kg/Mm (336 Lbs/In) With Spring Preload: 7-10 Mm. Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance..
【Upgraded Version】We Adopted Track Grade Springs, Added Better Viscosity Track Grade Damping Oil With Good Adhesion, Corrosion Resistance, And Good Damping At Very High And Very Low Temperatures; Improved Handling And Adjusted Valve Coefficients. These Greatly Improve Comfort And Stability. In Addition, The Dust-Free Assembly And Improved Handling Process Enable Our Products To Achieve Higher Quality And Better Results..
Features
- Fit Perfectly For Toyota Celica GT GTS FWD 1989.10- 1993.11 (ST18#); For Toyota Celica FWD 11.1993.11-1999.08 (ST20#)
- Upgraded Version We adopted track grade springs, added better viscosity track grade damping oil with good adhesion, corrosion resistance, and good damping at very high and very low temperatures; improved handling and adjusted valve coefficients. These greatly improve comfort and stability. In addition, the dust-free assembly and improved handling process enable our products to achieve higher quality and better results.
- 24 Rebound Force Levels for More Control Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Front Spring rate: 10 kg/mm (560 lbs/in) & Rear Spring rate: 6kg/mm (336 lbs/in) with spring preload: 7-10 mm. Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will Lower your car and DOES NOT keep to original ride height.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 7.87 x 24.41 x 19.69 inches | Weight: 67.06 pounds
See On Amazon Similar To maXpeedingrods Coilover Adjustable for Toyota
#1
maXpeedingrods Coilovers for Honda Civic 1989-2000, CRX 1989-1991, Delsol 1993-1997, for Acura Integra 1994-2001, Adjustable Height Coilovers Suspension Kit Spring Shock Absorber, Lowering Kit Red
Asin: B083BW1F87
【Adjustable Height】 The Height Is Adjustable For 1-3 Inches(Notice: The Coilovers Kit Will "Lower Your Car" And Does Not Keep To The Original Ride Height.), Allowing You To Have A More Aggressive Stance, This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response..
【Excellent Material】The Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Spring Rate】 Front Spring Rate: 8 Kg/Mm (448 Lbs/In) & 5 Kg/Mm (280 Lbs/In) With Spring Preload: 7-10 Mm. Spring Length Front: 180Mm & Spring Length Rear: 180Mm; Coilover Overall Length Front: 365Mm-410Mm & Coilover Overall Length Rear: 435Mm-480M.
Features
- Fit Perfectly For Honda Civic 1989-1991 ED2 ED3 ED4 ED6 ED7 EC8 EE9; For Honda Civic 1992-1995 EG1 EG2 EG3 EG4 EG5 EG6 EG8 EG9 EJ1 EJ2 EH2 EH3 EH9; For Honda Civic 1995-2000 EK2 EK3 EK4 EJ6 EJ7 EJ8 EM1; For Honda CRX 1989-1991 ED8 ED9 EE8; For Honda Delsol 1993-1997 EG1; For Acura Integra 1994-2001 DC2 DC4 (Rear Fork Type Bracket Model Only)
- Spring Rate Front Spring rate: 8 kg/mm (448 lbs/in) & 5 kg/mm (280 lbs/in) with spring preload: 7-10 mm. Spring length Front: 180mm & Spring length Rear: 180mm; Coilover overall length Front: 365mm-410mm & Coilover overall length Rear: 435mm-480m
- Adjustable Height The height is adjustable for 1-3 inches(Notice: The coilovers kit will Lower your car and does not keep to the original ride height.), allowing you to have a more aggressive stance, This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 Inches | Weight: 42.86 pounds
See On Amazon #2
maXpeedingrods Coilover Adjustable for Honda Civic 1989-2000 CRX 1989-1991 Delsol 1993-1997 for Acura Integra 1994-2001, 24 Level Adjustable Damper Spring Shock Absorber, Red Suspension Kit Struts
Asin: B0784QQWL5
【Spring Rate】 Front Spring Rate: 8 Kg/Mm (448 Lbs/In) & 5 Kg/Mm (280 Lbs/In) With Spring Preload: 7-10 Mm. Spring Length Front: 180Mm & Spring Length Rear: 180Mm; Coilover Overall Length Front: 365Mm-410Mm & Coilover Overall Length Rear: 435Mm-480M.
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Adjustable Height】 The Height Is Adjustable For 1-3 Inches(Notice: The Coilovers Kit Will "Lower Your Car" And Does Not Keep To The Original Ride Height.), Allowing You To Have A More Aggressive Stance, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response..
【24 Rebound Force Levels】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
Features
- Fit Perfectly For Honda Civic 1989-1991 ED2 ED3 ED4 ED6 ED7 EC8 EE9; For Honda Civic 1992-1995 EG1 EG2 EG3 EG4 EG5 EG6 EG8 EG9 EJ1 EJ2 EH2 EH3 EH9; For Honda Civic 1995-2000 EK2 EK3 EK4 EJ6 EJ7 EJ8 EM1; For Honda CRX 1989-1991 ED8 ED9 EE8; For Honda Delsol 1993-1997 EG1; For Acura Integra 1994-2001 DC2 DC4 (Rear Fork Type Bracket Model Only)
- 24 Rebound Force Levels Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Front Spring rate: 8 kg/mm (448 lbs/in) & 5 kg/mm (280 lbs/in) with spring preload: 7-10 mm. Spring length Front: 180mm & Spring length Rear: 180mm; Coilover overall length Front: 365mm-410mm & Coilover overall length Rear: 435mm-480m
- Adjustable Height The height is adjustable for 1-3 inches(Notice: The coilovers kit will Lower your car and does not keep to the original ride height.), allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 inches
See On Amazon #3
maXpeedingrods Coilovers for Toyota Camry 1992-2001, for Toyota Avalon 1995-2003, for Solara 1999-2003, for Lexus ES300 1992-2001, Height Adjustable Coilover Suspension Kit, [Upgrade Spring] Gold
Asin: B0CPJ2N4QJ
【Spring Rate】 Front Spring Rate: 10 Kg/Mm (560 Lbs/In) & Rear Spring Rate: 6 Kg/Mm (336 Lbs/In) With Pring Preload: 7-10 Mm. Spring Length: 180Mm. Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance.
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort.
【Lowering Kits】 Lower Ride Height 1-3 Inches, Will Not Keep Oe Height, Allowing You To Have A More Aggressive Stance. This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.
【Fitment For Lexus】 For Lexus Es300 1997-2001 (Exclude Adjustable Suspension;) For Lexus Es300 1995-1996 All; For Lexus Es300 1992-1994 W/Sealed Struts.
Features
- Fitment for Toyota For Toyota Avalon 1995-2003 ALL; For Toyota Camry 1995-2001 ALL; For Toyota Camry 1992-1994 ALL w/Sealed Struts; For Toyota Solara 1999-2003 ALL
- Fitment for Lexus For Lexus ES300 1997-2001 (Exclude Adjustable Suspension;) For Lexus ES300 1995-1996 ALL; For Lexus ES300 1992-1994 w/Sealed Struts
- Spring Rate Front Spring rate: 10 kg/mm (560 lbs/in) & Rear Spring rate: 6 kg/mm (336 lbs/in) with pring Preload: 7-10 mm. Spring length: 180mm. Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance
- Lowering Kits Lower ride height 1-3 inches, will not keep OE height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 27.95 x 20.08 inches | Weight: 68.83 pounds
See On Amazon #4
maXpeedingrods Coilovers for Honda Civic 1992-2000, for Honda CRX 1992-1995, for Acura Integra 1990-2001, 24 Levels Damper Adjustable Coilovers Suspension Kit, Lowering Kit COT6 Upgarde Blue
Asin: B09L4HK7S2
【Spring Rate】 Front: 8Kg/Mm (448 Lbs/In), Rear: 5 Kg/Mm (280 Lbs/In), Coil Spring With Upgraded Material And Continuously Stress Test To Improve Performance And Reduce Spring Distortion.
【High Quality】 Most Components Of The Coilover Systems, Including Mounts, Collars, Spring Perches And Even The Lock Ring, Are Made From 6061-T6 Billet Aluminum For Durable And Rust Resistant; These Shock Assemblies Are With Cnc Machined Parts And Anti-Corrosion Finish With Anodized Aluminum And Powder Coated Carbon Cteel Parts.
【Damper & Height Adjustable】 These Coilover Kits With 24 Ways Damping Adjustment And 1" - 3" Ride Height Adjustment(Notice: The Coilovers Kit Will "Lower Your Car" And Does Not Keep To The Original Ride Height.), Allows You The Ability To Perfectly Dial In Your Coilover Setup, And Ensure You Experience A Better Ride Quality In All Road Conditions With More Aggressive Stance, Upgraded Damper Adjust Knob Makes Damping Setting Easier.
【Application】 For Honda Civic 1992-1995 Eg1 Eg2 Eg3 Eg4 Eg5 Eg6 Eg8 Eg9 Ej1 Ej2 Eh2 Eh3 Eh9 Rear Fork Type Bracket Model Only; For Honda Civic 1995-2000 Ek2 Ek3 Ek4 Ej6 Ej7 Ej8 Em1 Rear Fork Type Bracket Model Only; For Honda Delsol 1993-1997 Eg1 Rear Fork Type Bracket Model Only;.
Features
- T6 Serie Suitable for users who pursue higher performance in street driving. Upgraded springs, high-quality damping oil with better viscosity, have good adhesion, corrosion resistance, and damping performance at extreme temperatures; Improved operation and adjusted valve coefficients. This greatly improves comfort and stability.
- Application For Honda Civic 1992-1995 EG1 EG2 EG3 EG4 EG5 EG6 EG8 EG9 EJ1 EJ2 EH2 EH3 EH9 Rear Fork Type Bracket Model Only; For Honda Civic 1995-2000 EK2 EK3 EK4 EJ6 EJ7 EJ8 EM1 Rear Fork Type Bracket Model Only; For Honda Delsol 1993-1997 EG1 Rear Fork Type Bracket Model Only;
- Spring rate Front: 8kg/mm (448 lbs/in), Rear: 5 kg/mm (280 lbs/in), coil spring with upgraded material and continuously stress test to improve performance and reduce spring distortion
- Damper & Height Adjustable these coilover kits with 24 ways damping adjustment and 1 - 3 ride height adjustment(Notice: The coilovers kit will Lower your car and does not keep to the original ride height.), allows you the ability to perfectly dial in your coilover setup, and ensure you experience a better ride quality in all road conditions with more aggressive stance, upgraded damper adjust knob makes damping setting easier
- High Quality Most components of the coilover systems, including mounts, collars, spring perches and even the lock ring, are made from 6061-T6 billet aluminum for durable and rust resistant; these shock assemblies are with CNC machined parts and anti-corrosion finish with anodized aluminum and powder coated carbon cteel parts
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 27.95 x 20.08 Inches
See On Amazon #5
maXpeedingrods Coilovers for VW Golf MK4 1998-2007, for VW Beetle 1998-2010, for Seat Leon 1999-2006, for VW Jetta MK4 1999-2005, Height Adjustable Coilovers Suspension Kit, Lowering Kit Red
Asin: B078JKBNGF
【Adjustable Height】 Adjustable Height: Lowering 35Mm-75Mm. It’S A Replacement Part That Retains Maximum Height And Comfort Of The Original..
【Excellent Material】The Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Spring Rate】 Spring Rate Front: 8 Kg/Mm (448 Lbs/In) & Spring Rate Rear: 6 Kg/Mm (336 Lbs/In); Spring Length Front: 170Mm & Spring Length Rear: 275Mm; Coilover Overall Length Front: 370Mm-540Mm & Coilover Overall Length Rear: 410Mm-650Mm.
Features
- Application For VW Golf MK4 (1J1) FWD 1998-2007 & For VW New Beetle (9C1, 1C1) FWD 1998-2010; For SEAT LEON (1M1) FWD 1999-2006; For VW Jetta MK4 (1J/9M)1999-2005 (Will not fit for 4-MOTION & VW Golf MK4 R32 & for Audi quattro models; Sway bar link bracket is not included for AUDI TT 8N.)
- Spring Rate Spring rate Front: 8 kg/mm (448 lbs/in) & Spring rate Rear: 6 kg/mm (336 lbs/in); Spring length Front: 170mm & Spring length Rear: 275mm; Coilover overall length Front: 370mm-540mm & Coilover overall length Rear: 410mm-650mm
- Adjustable Height Adjustable height: lowering 35mm-75mm. It s a replacement part that retains maximum height and comfort of the original.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 27.95 x 20.08 inches | Weight: 45.28 pounds
See On Amazon #6
maXpeedingrods Coilover for Honda Element 2003-2011, Coil Spring Shock Absorber Struts, 24 Levels Damper Adjustable Coilovers Suspension Kit, for Honda Element Coilovers T6 Upgarded Lowering Kits
Asin: B0CVXGQ4G6
【24 Levels Adjustable Damper For More Control】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs.
【Adjustable Height】 The Height Is Adjustable For 1-3 Inches(Does Not Keep The Original Ride Height), Allowing You To Have A More Aggressive Stance. This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response.
【Spring Rate】 Spring Rate Front: 9Kg/Mm (504 Lbs/In) & Spring Rate Rear: 8Kg/Mm (448 Lbs/In) With Spring Preload: 7-10 Mm. High Tensile Performance Spring - Stress Tested Over 600,000 Times While The Spring Distortion Is Less Than 0.04%.
【Upgraded Version】 We Adopted Track Grade Springs, Added Better Viscosity Track Grade Damping Oil With Good Adhesion, Corrosion Resistance, And Good Damping At Very High And Very Low Temperatures; Improved Handling And Adjusted Valve Coefficients. These Greatly Improve Comfort And Stability. In Addition, The Dust-Free Assembly And Improved Handling Process Enable Our Products To Achieve Higher Quality And Better Results.
Features
- Fit Perfectly For Honda Element 2003 - 2011 extreme low for SC Models
- Upgraded Version We adopted track grade springs, added better viscosity track grade damping oil with good adhesion, corrosion resistance, and good damping at very high and very low temperatures; improved handling and adjusted valve coefficients. These greatly improve comfort and stability. In addition, the dust-free assembly and improved handling process enable our products to achieve higher quality and better results
- 24 Levels Adjustable Damper for More Control Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs
- Spring Rate Spring rate Front: 9kg/mm (504 lbs/in) & Spring rate Rear: 8kg/mm (448 lbs/in) with spring preload: 7-10 mm. High Tensile performance spring - stress tested over 600,000 times while the spring distortion is less than 0.04%
- Adjustable Height The height is adjustable for 1-3 inches(does not keep the original ride height), allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.31 x 24.96 x 20.12 inches | Weight: 55.78 pounds
See On Amazon #7
maXpeedingrods Front Coilover Top Mounts Camber Plates for Subaru Impreza WRX GDA GDB 2002-2007/ Forester 2003-2008 for Saab 9-2X 2004 2005
Asin: B073PRTGZC
Maintain Proper Strut Angle At Any Position By Not Pre-Setting The Angle.
For Oem/Stock Coilovers, Some Modification May Be Required. Please Confirm The Details Before Purchasing.
Provide Proper Orientation With A Replaceable Urethane Bushing.
Large Range Of Adjustment While Still Allowing Caster And Camber To Be Adjusted From The Top Without Cutting The Strut Tower.
Features
- Application: for Subaru Impreza WRX 02-07 GDA GDB (WRX Wagon, 2.5RS Models)
- Large range of adjustment while still allowing caster and camber to be adjusted from the top without cutting the strut tower
- Maintain proper strut angle at any position by not pre-setting the angle
- Provide proper orientation with a replaceable urethane bushing
- For OEM/Stock coilovers, some modification may be required. Please confirm the details before purchasing
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 3.35 x 7.09 x 6.30 inches | Weight: 3.31 pounds
See On Amazon #8
maXpeedingrods Coilovers for Scion XB 2004-2006, for Toyota Echo 2000-2005, Height Coilovers Suspension Kit Coil Strut, Coil Spring Shock Absorber Amortiguador Lowering Kit by 1-3 Twin-tube Gold
Asin: B086GWPZHL
【Lowering Kits】 The Height Adjustable By 1-3 Inches, Allowing You To Have A More Aggressive Stance. This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Struts Will "Lower Your Car" And Does Not Keep To Original Ride Height..
【Excellent Material】The Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Spring Rate】 Front Spring Rate: 10Kg/Mm (560 Lbs/In) & Rear Spring Rate: 5Kg/Mm (280 Lbs/In). Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance..
Features
- Fitment For Scion XB 2004 2005 2006 US model; For Toyota Echo 2000-2005
- Spring Rate Front Spring rate: 10Kg/mm (560 lbs/in) & Rear Spring rate: 5Kg/mm (280 lbs/in). Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will Lower your car and DOES NOT keep to original ride height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 inches | Weight: 54.90 pounds
See On Amazon #9
maXpeedingrods Coilovers for Subaru Impreza WRX 2000-2007, for Subaru Forester 2003-2008, Height Adjustable Coilovers Suspension Kit, Coil Spring Shock Absorber Struts, Lowering Kit Gold
Asin: B019RC83QO | Model: FBMA@CO-SUBGDB-G-NA | PartNumber: FBMA@CO-SUBGDB-G-NA | Ean: 0762640566130 | UPC: 762640566130
【Lower Height】 The Height Is Adjustable For 1-3 Inches, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Strut Will "Lowering Your Car" And Does Not Keep To Original Ride Height..
【Excellent Material】The Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Spring Rate】 Front Spring Rate: 9 Kg/Mm(504 Lbs/In) & Rear Spring Rate: 7 Kg/Mm(392 Lbs/In), Spring Preload: 7-10 Mm With Pillow Ball Top Mounts And Adjustable Camber Plate. Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance..
Features
- Fit Perfectly For Subaru Impreza WRX 2000.08-2007.06 GDA GD9 GGA;For Subaru Impreza WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100);For Subaru Forester SG 2003-2008;For SAAB 9-2X 2005-2007 GGA GGE
- Spring Rate Front Spring rate: 9 kg/mm(504 lbs/in) & Rear Spring rate: 7 kg/mm(392 lbs/in), Spring Preload: 7-10 mm with pillow ball top mounts and adjustable camber plate. Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- Lower Height The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These Coilovers Strut will Lowering your car and DOES NOT keep to Original Ride Height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 27.95 x 20.08 inches | Weight: 64.77 pounds
Warranty: No
See On Amazon #10
maXpeedingrods Coilover for Lexus LS430 2001-2006, for Toyota Celsior 2000-2006, 24 Levels Damping Adjustable Coilovers Suspension Kit Struts, Shock Absorber Lowering Kits Upgraded T6 Coilover Blue
Asin: B0B2DMPQ57 | Model: FV52WQ | PartNumber: FV52WQ
【24 Levels Adjustable Damper For More Control】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
【Adjustable Height】 The Height Is Adjustable For 1-3 Inches, Allowing You To Have A More Aggressive Stance. This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response..
【Spring Rate】 Front Spring Rate: 12 Kg/Mm (672 Lbs/In) & Rear Spring Rate: 12 Kg/Mm (672 Lbs/In) With Spring Preload: 7-10 Mm. - Spring Length Front: 190Mm & Spring Length Rear: 190Mm; - Coilover Overall Length Front: 490Mm-600Mm & Coilover Overall Length Rear: 500Mm-610Mm.
【Upgraded Version】We Adopted Track Grade Springs, Added Better Viscosity Track Grade Damping Oil With Good Adhesion, Corrosion Resistance, And Good Damping At Very High And Very Low Temperatures; Improved Handling And Adjusted Valve Coefficients. These Greatly Improve Comfort And Stability. In Addition, The Dust-Free Assembly And Improved Handling Process Enable Our Products To Achieve Higher Quality And Better Results..
Features
- Fit Perfectly For Toyota Celsior 2000.08-2006.05 JPN UCF30; For Lexus LS4300 2001-2006 USA UCF30
- Upgraded Version We adopted track grade springs, added better viscosity track grade damping oil with good adhesion, corrosion resistance, and good damping at very high and very low temperatures; improved handling and adjusted valve coefficients. These greatly improve comfort and stability. In addition, the dust-free assembly and improved handling process enable our products to achieve higher quality and better results.
- 24 Levels Adjustable Damper for More Control Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Front Spring rate: 12 kg/mm (672 lbs/in) & Rear Spring rate: 12 kg/mm (672 lbs/in) with spring preload: 7-10 mm. - Spring length Front: 190mm & Spring length Rear: 190mm; - Coilover overall length Front: 490mm-600mm & Coilover overall length Rear: 500mm-610mm
- Adjustable Height The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.66 x 28.35 x 20.47 inches | Weight: 60.10 pounds
Warranty: 12 months
See On Amazon #11
maXpeedingrods Coilover Adjustable for Subaru Impreza WRX 2000-2007, for Saab 9-2X 2005-2007, for Subaru Forester 03-08; 24 Level Adjustable Damper Coilovers Suspension Kit, Shock Absorber Red
Asin: B01LXZCZQ8 | Model: 1496 | PartNumber: 1496
【Spring Rate】 Front Spring Rate: 9 Kg/Mm(504 Lbs/In) & Rear Spring Rate: 7 Kg/Mm(392 Lbs/In), Spring Preload: 7-10 Mm With Pillow Ball Top Mounts And Adjustable Camber Plate. Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Lower Height】 The Height Is Adjustable For 1-3 Inches, Allowing You To Have A More Aggressive Stance, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Strut Will "Lowering Your Car" And Does Not Keep To Original Ride Height..
【24 Rebound Force Levels For More Control】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
Features
- Fit Perfectly For Subaru Impreza WRX 2000.08-2007.06 GDA GD9 GGA; For Subaru Impreza WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100); For Subaru Forester SG 2003-2008;For SAAB 9-2X 2005-2007 GGA GGE
- 24 Rebound Force Levels for More Control Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Front Spring rate: 9 kg/mm(504 lbs/in) & Rear Spring rate: 7 kg/mm(392 lbs/in), Spring Preload: 7-10 mm with pillow ball top mounts and adjustable camber plate. Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- Lower Height The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These Coilovers Strut will Lowering your car and DOES NOT keep to Original Ride Height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 27.95 x 20.08 inches | Weight: 64.33 pounds
See On Amazon #12
maXpeedingrods Coilover for Ford Mustang 1994-2004, 24 Levels Damper Adjustable Coilovers Suspension Kit, Coil Spring Shock Absorber Struts, for Mustang Coilovers Lowering Kit by 1-3 Red
Asin: B078LCZDCS
【Spring Rate】 Front Spring Rate: 8 Kg/Mm (448 Lbs/In) & Rear Spring Rate: 7 Kg/Mm (392 Lbs/In); Spring Length Front: 230Mm & Spring Length Rear: 180Mm; Coilover Overall Length Front: 485Mm-575Mm & Coilover Overall Length Rear: 550Mm-600Mm.
【Double-Tube Structure】 Compared To Mono-Tube Construction, Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Adjustable Height】 The Height Is Adjustable: Front 485-575Mm，Rear 550-600Mm, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response..
【24 Ways Adjustable Damper】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
Features
- Fit Perfectly For Ford Mustang Base SN95 Convertible/Coupe 1994-2004; For Ford Mustang GT SN95 Convertible/Coupe 1994-2004
- 24 Ways Adjustable Damper Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Front Spring rate: 8 kg/mm (448 lbs/in) & Rear Spring rate: 7 kg/mm (392 lbs/in); Spring length Front: 230mm & Spring length Rear: 180mm; Coilover overall length Front: 485mm-575mm & Coilover overall length Rear: 550mm-600mm
- Adjustable Height The height is adjustable: front 485-575mm rear 550-600mm, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response.
- Double-tube Structure Compared to mono-tube construction, will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 27.95 x 20.08 inches
See On Amazon #13
maXpeedingrods Coilover for Honda Civic 1989-2000, for Honda CRX 1989-1991, for Acura Integra 1995-2000, 24 Levels Damper Adjustable Coilovers Suspension Kit, Shock Absorber Struts, Lowering Kit
Asin: B078MJLC4J
【Spring Rate】 Front Spring Rate: 8 Kg/Mm (448 Lbs/In) & 5 Kg/Mm (280 Lbs/In) With Spring Preload: 7-10 Mm. Spring Length Front: 180Mm & Spring Length Rear: 180Mm; Coilover Overall Length Front: 365Mm-410Mm & Coilover Overall Length Rear: 435Mm-480M.
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Adjustable Height】 The Height Is Adjustable For 1-3 Inches(Notice: The Coilovers Kit Will "Lower Your Car" And Does Not Keep To The Original Ride Height.), Allowing You To Have A More Aggressive Stance, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response..
【24 Rebound Force Levels】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
Features
- Fit Perfectly For Honda Civic 1989-1991 ED2 ED3 ED4 ED6 ED7 EC8 EE9; For Honda Civic 1992-1995 EG1 EG2 EG3 EG4 EG5 EG6 EG8 EG9 EJ1 EJ2 EH2 EH3 EH9; For Honda Civic 1995-2000 EK2 EK3 EK4 EJ6 EJ7 EJ8 EM1; For Honda CRX 1989-1991 ED8 ED9 EE8; For Honda Delsol 1993-1997 EG1; For Acura Integra 1994-2001 DC2 DC4 (Rear Fork Type Bracket Model Only)
- 24 Rebound Force Levels Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Front Spring rate: 8 kg/mm (448 lbs/in) & 5 kg/mm (280 lbs/in) with spring preload: 7-10 mm. Spring length Front: 180mm & Spring length Rear: 180mm; Coilover overall length Front: 365mm-410mm & Coilover overall length Rear: 435mm-480m
- Adjustable Height The height is adjustable for 1-3 inches(Notice: The coilovers kit will Lower your car and does not keep to the original ride height.), allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 Inches
See On Amazon #14
maXpeedingrods 2pcs Front Coilover Adjustable Camber Plate Top Mount for Nissan S14 240SX 1995-1998, for Nissan S13 240SX 1989-1990 Top Mount Camber Plate Upper Mount, Gold
Asin: B00U89CV9Q | Model: CP-NIS-S13-G | PartNumber: CP-NIS-S13-G | Ean: 0709803561779 | UPC: 709803561779
Bushing: Pillow Ball Design For Adjustment Precisely.
Please Take This As The Standard, If You Have Any Questions, Please Contact Us In Time.
All Components Are Carefully Selected With The Quality Material For Durable Use.
Quantity: One Set With 2 Pieces.
Features
- Fit for Nissan S13 S14 Silvia 180SX 200SX 240SX Camber Plate top mount
- Quantity: One set with 2 pieces
- Bushing: Pillow Ball design for adjustment precisely
- All components are carefully selected with the quality material for durable use
- please take this as the standard, if you have any questions, please contact us in time
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 3.35 x 7.09 x 6.10 inches | Weight: 3.31 Pounds
See On Amazon #15
maXpeedingrods Coilovers for Honda CR-V 2007-2011, Adjustable Height Coilovers Suspension Kit Strut, Coil Spring Shock Absorber, Amortiguador Lowering Kits by 1-3 Golden
Asin: B0BVZ1XP3W
【Lowering Kits】 The Height Adjustable By 1-3 Inches, Allowing You To Have A More Aggressive Stance. This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Struts Will "Lower Your Car" And Does Not Keep To Original Ride Height..
【Excellent Material】The Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Spring Rate】 Front Spring Rate: 6 Kg/Mm (336 Lbs/In) & Rear Spring Rate: 6 Kg/Mm (336 Lbs/In) With Spring Preload: 7-10 Mm. Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance..
Features
- Fit Perfectly For Honda CRV CR-V 2007-2011.
- Spring Rate Front Spring rate: 6 kg/mm (336 lbs/in) & Rear Spring rate: 6 kg/mm (336 lbs/in) with spring preload: 7-10 mm. Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will Lower your car and DOES NOT keep to original ride height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
See On Amazon #16
maXpeedingrods Coilover for Toyota Corolla 2009-2019, for Toyota Matrix E140 2009-2019, 24 Level Damper Adjustable Coilovers Suspension Kit Strut, Spring Shock Absorber, Amortiguador Loering Kit
Asin: B09WV1H32G
【Spring Rate】 Front Spring Rate: 10 Kg/Mm (558 Lbs/In) & Rear Spring Rate: 6 Kg/Mm (336 Lbs/In). Spring Length Front: 200Mm & Spring Length Rear: 160Mm; Coilover Overall Length Front: 360Mm-455Mm & Coilover Overall Length Rear: 313Mm-370Mm.
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Lowering Kits】 The Height Adjustable By 1-3 Inches, Allowing You To Have A More Aggressive Stance. This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Struts Will "Lower Your Car" And Does Not Keep To Original Ride Height..
【24 Rebound Force Levels For More Control】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
Features
- Fit Perfectly For Toyota Corolla (E140) AZE141L XRS 2009-2010; For Toyota Corolla (E140/E160) ZRE142L LE 2009-2013; For Toyota Corolla (E150/E170) ZRE172L all 2014-2019; For Toyota Matrix (E140) LE 2009-2014
- 24 Rebound Force Levels for More Control Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Front Spring rate: 10 kg/mm (558 lbs/in) & Rear Spring rate: 6 kg/mm (336 lbs/in). Spring length Front: 200mm & Spring length Rear: 160mm; Coilover overall length Front: 360mm-455mm & Coilover overall length Rear: 313mm-370mm
- Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will Lower your car and DOES NOT keep to original ride height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 inches | Weight: 56.88 pounds
See On Amazon #17
maXpeedingrods Coilovers for Toyota Corolla 1987-2002, Coil Spring Shock Absorber, Height Adjustable Coilovers Suspension Kit, for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 Lowering Kit Gold
Asin: B0979G71N4
【Lowering Kits】 The Height Adjustable By 1-3 Inches, Allowing You To Have A More Aggressive Stance. This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Struts Will "Lower Your Car" And Does Not Keep To Original Ride Height..
【Excellent Material】The Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Spring Rate】 Front Spring Rate: 8 Kg/Mm (448 Lbs/In) & Rear Spring Rate: 6 Kg/Mm (336 Lbs/In) With Spring Preload: 7-10 Mm. Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance..
Features
- Fit Perfectly For Toyota Corolla E90 1987 1992 For Toyota Corolla E100 1991 1998; For Toyota Corolla E110 1995-2002 For Toyota Corolla AE92 1987-1991 For Toyota Corolla AE101 1992-1998 For Toyota Corolla AE111 1988-2002
- Spring Rate Front Spring rate: 8 kg/mm (448 lbs/in) & Rear Spring rate: 6 kg/mm (336 lbs/in) with spring preload: 7-10 mm. Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will Lower your car and DOES NOT keep to original ride height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 25.20 x 20.08 inches | Weight: 58.82 pounds
See On Amazon #18
maXpeedingrods Coilovers for Toyota Corolla 2009-2019, for Toyota Matrix (E140) LE 2009-2014, Spring Shock Absorber, Adjustable Height Coilovers Suspension Kit Struts, Amortiguador Lowering Kit Gold
Asin: B0995NB4JF
【Lowering Kits】 The Height Adjustable By 1-3 Inches, Allowing You To Have A More Aggressive Stance. This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Struts Will "Lower Your Car" And Does Not Keep To Original Ride Height..
【Excellent Material】The Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Spring Rate】 Front Spring Rate: 10 Kg/Mm (558 Lbs/In) & Rear Spring Rate: 6 Kg/Mm (336 Lbs/In). Spring Length Front: 200Mm & Spring Length Rear: 160Mm; Coilover Overall Length Front: 360Mm-455Mm & Coilover Overall Length Rear: 313Mm-370Mm.
Features
- Fit Perfectly For Toyota Corolla (E140) AZE141L XRS 2009-2010; For Toyota Corolla (E140/E160) ZRE142L LE 2009-2013; For Toyota Corolla (E150/E170) ZRE172L all 2014-2019; For Toyota Matrix (E140) LE 2009-2014
- Spring Rate Front Spring rate: 10 kg/mm (558 lbs/in) & Rear Spring rate: 6 kg/mm (336 lbs/in). Spring length Front: 200mm & Spring length Rear: 160mm; Coilover overall length Front: 360mm-455mm & Coilover overall length Rear: 313mm-370mm
- Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will Lower your car and DOES NOT keep to original ride height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.41 x 20.08 inches | Weight: 57.41 Pounds
See On Amazon #19
maXpeedingrods Coilovers for Toyata Rav4 chassis (A3) 2006-2012, 24 Levels Damper Adjustable Coilovers Suspension Kit Strut, Coil Spring Shock Absorber, Amortiguador Lowering Kits by 1-3"
Asin: B0CLV334W1
【Adjustable Height】 The Height Is Adjustable For 1-3 Inches, Allowing You To Have A More Aggressive Stance, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response.
【Excellent Material】Our Coilover Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation.
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort.
【Spring Rate】 Spring Rate Front:10 Kg/Mm (560 Lbs/In). Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance.
Features
- Application The coilovers set is fit for Toyata Rav4 chassis (A3) 2006 2007 2008 2009 2010 2011 2012
- Spring Rate Spring rate front:10 kg/mm (560 lbs/in). Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance
- Adjustable Height The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort
- Excellent Material Our coilover comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 7.48 x 27.76 x 19.96 inches | Weight: 46.74 pounds
See On Amazon #20
maXpeedingrods Coilover Adjustable for Honda Civic 1989-2000 CRX 1989-1991 Delsol 1993-1997, for Acura Integra 1994-2001, 24 Level Adjustable Damper Shock Absorber, Coilovers Suspension Kits Gold
Asin: B08L4WBCYH | Model: 96-00 | PartNumber: 96-00
【Spring Rate】 Front Spring Rate: 8 Kg/Mm (448 Lbs/In) & 5 Kg/Mm (280 Lbs/In) With Spring Preload: 7-10 Mm. Spring Length Front: 180Mm & Spring Length Rear: 180Mm; Coilover Overall Length Front: 365Mm-410Mm & Coilover Overall Length Rear: 435Mm-480M.
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Adjustable Height】 The Height Is Adjustable For 1-3 Inches(Notice: The Coilovers Kit Will "Lower Your Car" And Does Not Keep To The Original Ride Height.), Allowing You To Have A More Aggressive Stance, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response..
【24 Rebound Force Levels】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
Features
- Fit Perfectly For Honda Civic 1989-1991 ED2 ED3 ED4 ED6 ED7 EC8 EE9; For Honda Civic 1992-1995 EG1 EG2 EG3 EG4 EG5 EG6 EG8 EG9 EJ1 EJ2 EH2 EH3 EH9; For Honda Civic 1995-2000 EK2 EK3 EK4 EJ6 EJ7 EJ8 EM1; For Honda CRX 1989-1991 ED8 ED9 EE8; For Honda Delsol 1993-1997 EG1; For Acura Integra 1994-2001 DC2 DC4 (Rear Fork Type Bracket Model Only)
- 24 Rebound Force Levels Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Front Spring rate: 8 kg/mm (448 lbs/in) & 5 kg/mm (280 lbs/in) with spring preload: 7-10 mm. Spring length Front: 180mm & Spring length Rear: 180mm; Coilover overall length Front: 365mm-410mm & Coilover overall length Rear: 435mm-480m
- Adjustable Height The height is adjustable for 1-3 inches(Notice: The coilovers kit will Lower your car and does not keep to the original ride height.), allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 Inches | Weight: 42.86 pounds
See On Amazon
Looking For Something Else?
Search