Lifeboat Urethane Pour Foam - 2lb Density - 1 Gallon Kit 2-Part Closed Cell Rigid Pour Foam - Fast-Acting Formula - Great for Boat Buoyancy, Flotation, Filling, Soundproofing, & Insulation
Asin: B0B334287D | Model: FOAM02LB01G-LXC | PartNumber: FOAM02LB01G-LXC
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✅ Easy To Use - Great Even For Novice Boat Owners! This Pourable Liquid Urethane Foam Is Very Easy To Work With And Expands Rapidly. Mix Parts A & B At A 1:1 Ratio For Best Results..
✅ Quick Setting - Our Expanding Foam Has A Short Curing Time And Minimal Shrinkage, Leaving Your Boat Ready For Use Just Hours After Application. The Foam Hardens In Place Within 10 Minutes.
✅ Long Lasting Results - Once Cured, Urethane Is Unaffected By Gasoline, Oil, Fresh Or Saltwater, Or Solvents, Making It One Of The Most Dependable And Enduring Materials For Boating Needs.
✅ Impressive Strength - Urethane Is Both Lightweight And Extremely Reliable. After Curing Into Its Rigid Form, Our Insulating Foam Boasts A 95 To 98% Closed Cell Structure With A 2Lb Density.
✅ 1-Gallon Kit = 1/2 Gallon Part A & 1/2 Gallon Part B For A Total Volume Of 1 Gallon. This Kit Has The Capacity To Expand To A Substantial Volume Of 4 Cubic Feet. Initially, It Exhibits A Liquid-Like Consistency, Progressively Transitioning Into A Rapid Expansion Phase (Mix Extremely Well And Fully, Scraping The Sides Of The Container And Doing So Rapidly). It Is Advised To Mix And Apply The Kit In Smaller, Measured Quantities.To Ensure Precise Control Over The Expansion Process And Achieve A More Uniform And Controlled Fill Within Confined Spaces..
Features
- LIQUID EXPANDING FOAM to RIGID INSULATION - The ideal foam for marine flotation foam applications, our liquid urethane foam is also great for soundproofing and insulating. Use it to fill dock floats, gaps and cavities in boats and a multitude of other applications.
- 1-Gallon Kit = 1/2 gallon Part A & 1/2 gallon Part B for a total volume of 1 gallon. This kit has the capacity to expand to a substantial volume of 4 cubic feet. Initially, it exhibits a liquid-like consistency, progressively transitioning into a rapid expansion phase (mix extremely well and fully, scraping the sides of the container and doing so rapidly). It is advised to mix and apply the kit in smaller, measured quantities.To ensure precise control over the expansion process and achieve a more uniform and controlled fill within confined spaces.
- EASY TO USE - Great even for novice boat owners! This pourable liquid urethane foam is very easy to work with and expands rapidly. Mix Parts A & B at a 1:1 ratio for best results.
- IMPRESSIVE STRENGTH - Urethane is both lightweight and extremely reliable. After curing into its rigid form, our insulating foam boasts a 95 to 98% closed cell structure with a 2lb density
- QUICK SETTING - Our expanding foam has a short curing time and minimal shrinkage, leaving your boat ready for use just hours after application. The foam hardens in place within 10 minutes
- LONG LASTING RESULTS - Once cured, urethane is unaffected by gasoline, oil, fresh or saltwater, or solvents, making it one of the most dependable and enduring materials for boating needs
- See more on Amazon...
Brand: Generic | Manufacturer: Lab X Creations
Dimensions: 9.90 x 9.50 x 4.75 inches | Weight: 9.35 Pounds
See On Amazon Similar To Lifeboat Urethane Pour Foam 2lb
#1
TotalBoat Flotation Foam - 2 Part Expanding Polyurethane Marine Pour Foam for Boat Floatation, Insulation and Soundproofing (2 LB Density, 2 Gallon Kit)
Asin: B01AAP3ILC | Model: TB-FOAM | PartNumber: TB-FOAM | Ean: 0811932022103 | UPC: 811932022103
94% Closed Cell Foam: Perfect For Marine Applications; Resists Water Absorption And Damage From Gas, Oil Or Solvents; Once Cured, Foam Can Be Coated With Polyester, Epoxy Or Vinyl Ester Resin; Can Also Be Easily Cut Or Carved To Shape.
Available In A 2 Quart Kit And A 2 Gallon Kit; Yield: 2 Quart Kit – 2 Cubic Ft; 2 Gallon Kit – 8 Cubic Ft; Flotation Range For 2Lb Foam: 75 Lbs Per Mixed 2 Quart Kit, And 300 Lbs Per Mixed 2 Gallon Kit; Shelf Life Is 6 Months From Date Of Manufacture.
Ideal Working Temperature Is 75-85°F; Proper Temperature, Timing, Mixing And Venting Are Critical For Proper Foam Expansion; Below 75°F Expansion Decreases; After Mixing, The Foam Expands Rapidly And Becomes Rigid, So Clean The Surface In Advance And Be Ready To Pour.
Easy To Use: Liquid Urethane Pour Foam Has A Simple 1:1 Mix Ratio, Expands Rapidly & Hardens In Place In About 5 Min. At 70-80°F; To Build Multiple Layers For Filling Under Boat Decks, Pour Expanding Foam In Separate Batches.
Features
- LIGHTWEIGHT, TWO PART POLYURETHANE FOAM: Ideal for adding buoyancy, thermal insulation, soundproofing, and filling gaps or voids; for nonstructural applications only; tested in accordance with U.S. Coast Guard Regulation # 33 CFR 183.114
- EASY TO USE: Liquid urethane pour foam has a simple 1:1 mix ratio, expands rapidly & hardens in place in about 5 min. at 70-80 F; to build multiple layers for filling under boat decks, pour expanding foam in separate batches
- 94% CLOSED CELL FOAM: Perfect for marine applications; resists water absorption and damage from gas, oil or solvents; once cured, foam can be coated with polyester, epoxy or vinyl ester resin; can also be easily cut or carved to shape
- IDEAL WORKING TEMPERATURE IS 75-85 F; proper temperature, timing, mixing and venting are critical for proper foam expansion; below 75 F expansion decreases; after mixing, the foam expands rapidly and becomes rigid, so clean the surface in advance and be ready to pour
- AVAILABLE IN A 2 QUART KIT AND A 2 GALLON KIT; Yield: 2 Quart Kit 2 cubic ft; 2 Gallon Kit 8 cubic ft; Flotation Range for 2lb foam: 75 lbs per mixed 2 quart kit, and 300 lbs per mixed 2 gallon kit; shelf life is 6 months from date of manufacture
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 10.00 x 8.50 x 6.50 Inches | Weight: 20.00 pounds
See On Amazon #2
2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)
Asin: B08RP8DNDB | Model: Poly2lbgk | PartNumber: Poly2lbgk | Ean: 0819794022859 | UPC: 819794022859
2# Density Polyurethane Flotation Foam 1 Gallon Kit; Consists Of 1/2 Gallon Of Part A And 1/2 Gallon Of Part B And Produces 5 Cubic Feet..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
This Expandable Foam Is Recommended For Void Filling In Nonstructural Applications. It Can Be Poured Underneath Decks And Inside Cavities Where A Lightweight Flotation Foam Is Needed To Provide Buoyancy..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy.
- 2# Density polyurethane flotation Foam 1 Gallon Kit; Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 5 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #3
6 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boats, Dock Flotation, Carving, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)
Asin: B0BBH4XQ9P
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 6Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications.
6Lb. Density Polyurethane Flotation Foam 1 Gallon Kit; Consists Of 1/2 Gallon Of Part A And 1/2 Gallon Of Part B And Produces 1.5 Cubic Feet..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 6LB. Density polyurethane flotation Foam 1 Gallon Kit; Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 1.5 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 6LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
Weight: 6.00 Pounds
See On Amazon #4
TotalBoat 6 Lb Density Expanding Foam Kit, 2 Part Closed Cell Polyurethane Liquid Foam for Boat Flotation, Casting, Carving, Sculpture, Reinforcement and Void Filling (2 Gallon Kit)
Asin: B01AAWRYZG | Model: TB-FOAM6 | PartNumber: TB-FOAM6 | Ean: 0811932022127 | UPC: 811932022127
Fast-Setting, Cures To A 94% Closed Cell Foam, Where Each Cell Traps Air And Prevents Liquids Such As Water, Gas, And Oil From Penetrating; Once Fully Cured, Foam Is Compatible With Epoxy, Polyester Or Vinyl Ester Resins, And Can Be Painted.
Available In A 2 Quart Kit And A 2 Gallon Kit. Yield: 2-Quart Kit – 3/4 Cubic Ft, 2-Gallon Kit – 3 Cubic Ft; Flotation Range For 6Lb Foam: 23 Lbs Per Mixed 2 Quart Kit And 92 Lbs Per Mixed 2 Gallon Kit.
Ideal Working Temperature Is 75-85°F. Proper Temperature, Mixing, Timing And Venting Are Critical For Proper Foam Expansion; Below 75°F Expansion Decreases; The Foam Expands Rapidly After Mixing, So Prep The Surface In Advance And Be Ready To Pour.
6 Pounds Per Cubic Foot High-Density Formula Is Perfect For Casting, Carving, Sculpture, Plug Making, Sign Making, Flotation For Boats And Buoys, Floating Decoys, Part Fabrication, Replicating Wooden Parts, Rigidifying, Structural Support And More.
Features
- TWO-PART, MARINE GRADE EXPANDING FOAM cures very hard and rigid, with high compressive strength ideal for a number of marine and residential applications, including structural reinforcement, architectural castings, art projects and flotation
- 6 POUNDS PER CUBIC FOOT HIGH-DENSITY FORMULA is perfect for casting, carving, sculpture, plug making, sign making, flotation for boats and buoys, floating decoys, part fabrication, replicating wooden parts, rigidifying, structural support and more
- FAST-SETTING, CURES TO A 94% CLOSED CELL FOAM, where each cell traps air and prevents liquids such as water, gas, and oil from penetrating; once fully cured, foam is compatible with epoxy, polyester or vinyl ester resins, and can be painted
- IDEAL WORKING TEMPERATURE IS 75-85 F. Proper temperature, mixing, timing and venting are critical for proper foam expansion; below 75 F expansion decreases; the foam expands rapidly after mixing, so prep the surface in advance and be ready to pour
- AVAILABLE IN A 2 QUART KIT AND A 2 GALLON KIT. Yield: 2-Quart Kit 3/4 cubic ft, 2-Gallon Kit 3 cubic ft; Flotation Range for 6lb foam: 23 lbs per mixed 2 quart kit and 92 lbs per mixed 2 gallon kit
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 10.00 x 8.50 x 6.50 Inches | Weight: 20.00 pounds
See On Amazon #5
4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)
Asin: B08T2195F8 | Ean: 0819794022934 | UPC: 819794022934
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 4Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications.
4Lb. Density Polyurethane Flotation Foam 1 Gallon Kit; Consists Of 1/2 Gallon Of Part A And 1/2 Gallon Of Part B And Produces 2 Cubic Feet..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 4LB. Density polyurethane flotation Foam 1 Gallon Kit; Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 2 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
Dimensions: 6.00 x 10.00 x 9.00 Inches
See On Amazon #6
2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (Quart Kit)
Asin: B08R7TX8QJ | Model: poly2lbqk | PartNumber: poly2lbqk | Ean: 0819794022873 | UPC: 819794022873
2# Density Polyurethane Flotation Foam Quart Kit; Consists Of 1 Pint Of Part A And 1 Pint Of Part B And Produces 1.25 Cubic Feet..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
This Expandable Foam Is Recommended For Void Filling In Nonstructural Applications. It Can Be Poured Underneath Decks And Inside Cavities Where A Lightweight Flotation Foam Is Needed To Provide Buoyancy..
Features
- Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy.
- 2# Density polyurethane flotation Foam Quart Kit; Consists of 1 pint of Part A and 1 pint of Part B and produces 1.25 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
Weight: 2.00 Pounds
See On Amazon #7
4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (Quart Kit)
Asin: B08T255GS5 | Ean: 0819794022897 | UPC: 819794022897
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 4Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications.
4Lb. Density Polyurethane Flotation Foam Quart Kit; Consists Of 1 Pint Of Part A And 1 Pint Of Part B And Produces 1/2 Cubic Foot..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 4LB. Density polyurethane flotation Foam Quart Kit; Consists of 1 pint of Part A and 1 pint of Part B and produces 1/2 cubic foot.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #8
2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)
Asin: B08LW1ZNK8 | Model: poly2lb2gk | PartNumber: poly2lb2gk | Ean: 0819794022675 | UPC: 819794022675
2# Density Polyurethane Flotation Foam 2 Gallon Kit; Consists Of 1 Gallon Of Part A And 1 Gallon Of Part B And Produces 10 Cubic Feet..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
This Expandable Foam Is Recommended For Void Filling In Nonstructural Applications. It Can Be Poured Underneath Decks And Inside Cavities Where A Lightweight Flotation Foam Is Needed To Provide Buoyancy..
Features
- Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy.
- 2# Density polyurethane flotation Foam 2 Gallon Kit; Consists of 1 gallon of Part A and 1 gallon of Part B and produces 10 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
Weight: 2.00 Pounds
See On Amazon #9
4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)
Asin: B08V5BV9V9 | Ean: 0819794022927 | UPC: 819794022927
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 4Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications..
4Lb. Density Polyurethane Flotation Foam 2 Gallon Kit; Consists Of 1 Gallon Of Part A And 1 Gallon Of Part B And Produces 4 Cubic Feet..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 4LB. Density polyurethane flotation Foam 2 Gallon Kit; Consists of 1 gallon of Part A and 1 gallon of Part B and produces 4 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #10
6 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boats, Dock Flotation, Carving, Soundproofing, Filling Voids, and Insulation (Quart Kit)
Asin: B0BLKLDH79
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 6Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications.
6Lb. Density Polyurethane Flotation Foam 1 Quart Kit; Consists Of 1 Pint Of Part A And 1 Pint Of Part B And Produces 0.375 Cubic Feet..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 6LB. Density polyurethane flotation Foam 1 Quart Kit; Consists of 1 Pint of Part A and 1 Pint of Part B and produces 0.375 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 6LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #11
4.4 Pound Marine Flotation Foam, 2 Part Polyurethane Expanding Foam, Structural Expanding Fence Post Foam, Closed Cell Liquid Foam for Insulation, Waterproofing and Filling, 2 Lb Density
Asin: B0CR6DDR3J | Ean: 0795276085409 | UPC: 795276085409
Insulation Properties: The Flotation Foam's Insulating Properties Help Maintain Temperature Stability Within Boats, Making Fence Post Foam Ideal For Insulating Fish Boxes, Bait Wells, And Marine Refrigeration Units. This Feature Enhances The Comfort And Functionality Of Marine Vessels, Especially In Extreme Weather Conditions..
Professional Technical Support: 1:1 Mix And Stir Evenly, The Working Time Before Foaming Is About 45 Seconds. Apply In Layers For Thicker Applications, Allowing Each Layer To Cure Before Adding The Next. Make Sure To Cover The Entire Surface Evenly. Please Feel Free To Contact Us And We Have A Good Team, You Can Get A Satisfactory Answer..
Versatility In Application: This Liquid Foam Can Be Used In A Variety Of Marine Applications, Not Only For Buoyancy But Also For Insulation, Soundproofing, And Vibration Dampening. Marine Polyurethane Expanding Foam Is Easy To Use And Ability To Conform To Any Shape Or Space Make It A Versatile Choice For Both Construction And Repair Work In The Marine Industry..
Strength And Durability: Upon Mixing The Two Components, The Expanding Foam Expands Significantly, Allowing It To Fill Voids And Cavities Effectively. T Despite Its Lightweight Nature, Polyurethane Pour Foam Is Remarkably Strong And Capable Of Withstanding Harsh Marine Conditions, Including Impacts And Constant Exposure To Saltwater..
Features
- EXCELLENT FLOTATION SUPPORT: Expanding foam for posts when cured, fence post foam creates a strong, closed-cell structure that traps air, contributing to the flotation capabilities of marine vessels and structures. This feature is crucial for ensuring that boats and marine structures remain afloat, making it a popular choice for manufacturing and repairing sailboats, kayaks, canoes, and other watercraft.
- STRENGTH AND DURABILITY: Upon mixing the two components, the expanding foam expands significantly, allowing it to fill voids and cavities effectively. T Despite its lightweight nature, polyurethane pour foam is remarkably strong and capable of withstanding harsh marine conditions, including impacts and constant exposure to saltwater.
- INSULATION PROPERTIES: The flotation foam's insulating properties help maintain temperature stability within boats, making fence post foam ideal for insulating fish boxes, bait wells, and marine refrigeration units. This feature enhances the comfort and functionality of marine vessels, especially in extreme weather conditions.
- VERSATILITY IN APPLICATION: This liquid foam can be used in a variety of marine applications, not only for buoyancy but also for insulation, soundproofing, and vibration dampening. Marine polyurethane expanding foam is easy to use and ability to conform to any shape or space make it a versatile choice for both construction and repair work in the marine industry.
- PROFESSIONAL TECHNICAL SUPPORT: 1:1 mix and stir evenly, the working time before foaming is about 45 seconds. Apply in layers for thicker applications, allowing each layer to cure before adding the next. Make sure to cover the entire surface evenly. Please feel free to contact us and we have a good team, you can get a satisfactory answer.
- See more on Amazon...
Brand: Oycevila
Weight: 4.40 pounds
See On Amazon #12
Lifeboat Urethane Pour Foam - 2lb Density - 2 Gallon Kit 2-Part Closed Cell Rigid Pour Foam - Fast-Acting Formula - Great for Boat Buoyancy, Flotation, Filling, Soundproofing, & Insulation
Asin: B0B37X4QJS | Model: FOAM02LB02G-LXC | PartNumber: FOAM02LB02G-LXC
✅ Easy To Use - Great For All Boaters, Novice To Expert Boat Owners! This Pourable Liquid Urethane Foam Is Very Easy To Work With And Expands Rapidly. Mix Parts A & B At A 1:1 Ratio For Best Results..
✅ Long Lasting Results - Once Cured, Urethane Is Unaffected By Gasoline, Oil, Fresh Or Saltwater, Or Solvents, Making It One Of The Most Dependable And Enduring Materials For Boating Needs.
✅ Quick Setting - Our Expanding Foam Has A Short Curing Time And Minimal Shrinkage, Leaving Your Boat Ready For Use Just Hours After Application. The Foam Hardens In Place Within 10 Minutes.
✅ Impressive Strength - Urethane Is Both Lightweight And Extremely Reliable. After Fully Curing To Its Rigid Form, Our Insulating Foam Boasts A 95 To 98% Closed Cell Structure With A 2Lb Density. See Images For Expansion Chart..
Features
- LIQUID EXPANDING FOAM to RIGID INSULATION - The ideal foam for marine flotation foam applications, our liquid urethane foam is also great for soundproofing and insulating. Use it to fill dock floats, gaps and cavities in boats and a multitude of other applications.
- IMPRESSIVE STRENGTH - Urethane is both lightweight and extremely reliable. After fully curing to its rigid form, our insulating foam boasts a 95 to 98% closed cell structure with a 2lb density. See images for expansion chart.
- EASY TO USE - Great for all boaters, novice to expert boat owners! This pourable liquid urethane foam is very easy to work with and expands rapidly. Mix Parts A & B at a 1:1 ratio for best results.
- QUICK SETTING - Our expanding foam has a short curing time and minimal shrinkage, leaving your boat ready for use just hours after application. The foam hardens in place within 10 minutes
- LONG LASTING RESULTS - Once cured, urethane is unaffected by gasoline, oil, fresh or saltwater, or solvents, making it one of the most dependable and enduring materials for boating needs
- See more on Amazon...
Brand: Generic | Manufacturer: Lab X Creations
Weight: 2.00 Pounds
See On Amazon #13
Lifeboat Urethane Pour Foam - 2lb Density - 4 Gallon Kit 2-Part Closed Cell Rigid Pour Foam - Fast-Acting Formula - Great for Boat Buoyancy, Flotation, Filling, Soundproofing, & Insulation
Asin: B0B6QBCXGQ | Model: FOAM02LB04G-LXC | PartNumber: FOAM02LB04G-LXC
✅ Easy To Use - Great Even For Novice Boat Owners! This Pourable Liquid Urethane Foam Is Very Easy To Work With And Expands Rapidly. Mix Parts A & B At A 1:1 Ratio For Best Results..
✅ Long Lasting Results - Once Cured, Urethane Is Unaffected By Gasoline, Oil, Fresh Or Saltwater, Or Solvents, Making It One Of The Most Dependable And Enduring Materials For Boating Needs.
✅ Quick Setting - Our Expanding Foam Has A Short Curing Time And Minimal Shrinkage, Leaving Your Boat Ready For Use Just Hours After Application. The Foam Hardens In Place Within 10 Minutes.
✅ Impressive Strength - Urethane Is Both Lightweight And Extremely Reliable. After Curing Into Its Rigid Form, Our Insulating Foam Boasts A 95 To 98% Closed Cell Structure With A 2Lb Density.
Features
- LIQUID EXPANDING FOAM to RIGID INSULATION - The ideal foam for marine flotation foam applications, our liquid urethane foam is also great for soundproofing and insulating. Use it to fill dock floats, gaps and cavities in boats and a multitude of other applications.
- IMPRESSIVE STRENGTH - Urethane is both lightweight and extremely reliable. After curing into its rigid form, our insulating foam boasts a 95 to 98% closed cell structure with a 2lb density
- EASY TO USE - Great even for novice boat owners! This pourable liquid urethane foam is very easy to work with and expands rapidly. Mix Parts A & B at a 1:1 ratio for best results.
- QUICK SETTING - Our expanding foam has a short curing time and minimal shrinkage, leaving your boat ready for use just hours after application. The foam hardens in place within 10 minutes
- LONG LASTING RESULTS - Once cured, urethane is unaffected by gasoline, oil, fresh or saltwater, or solvents, making it one of the most dependable and enduring materials for boating needs
- See more on Amazon...
Brand: Generic | Manufacturer: Lab X Creations
See On Amazon #14
Fiberglass Warehouse 2 LB Density 2-Part Polyurethane Liquid Expanding Pour Foam Kit (2 Gallon) | Closed Cell Waterproof Floatation Mix for Marine and Boat | Expandable Resin Component System
Asin: B089ZWRPS7 | Ean: 0648728173646 | UPC: 648728173646
✔️ Compatible With Other Materials – Strength And Compatibility Are Important With A Quality Pour Foam. Our Foam Is Versatile And Bonds Well With Polyester, Epoxy, Or Vinyl Ester Resin Coatings. It Also Adheres To Itself So You Can Build Multiple Layers By Pouring The Mix In Separate Batches To Form Strong Bonds Between Layers..
✔️ Environmentally Responsible – At Fiberglass Warehouse, We Care About The Environment And About Your Health. That’S Why Our Pour Foam Contains No Cfc Propulsion Agents Or Other Ozone Depleting Chemicals. Our Materials Also Contain Relatively Low Voc Emissions. Personal Protective Equipment Ppe And Proper Ventilation Is Recommended During Use..
✔️ Waterproof 94% Rigid Closed Cell Foam – Once The Foam Is Cured, It Helps Prevent Moisture Absorption In Marine And Boat Environments. The Closed Cell Structure Is Also Not Affected By Solvents, Oil Or Gas..
✔️ Easy To Mix, Shape, And Sand – Simply Mix Parts A And B Of The Liquid Resin Component System In A 1:1 Ratio, Mix For 45 Seconds And Pour. Expansion Starts In 45 Seconds And Is Fully Expanded In About 7 Minutes. Additional Layers Can Be Added For Strength And Can Easily Be Cut Or Sanded To Any Desired Shape..
Features
- 300 LBS. BUOYANCY, 2LBS/CU FT DENSITY Perfect for use with boat parts and dock floats, and is approved by the U.S. Coast Guard. It also works well for insulation, soundproofing, sound deadening, expansion gaps, and filling of voids.
- EASY TO MIX, SHAPE, AND SAND Simply mix parts A and B of the liquid resin component system in a 1:1 ratio, mix for 45 seconds and pour. Expansion starts in 45 seconds and is fully expanded in about 7 minutes. Additional layers can be added for strength and can easily be cut or sanded to any desired shape.
- COMPATIBLE WITH OTHER MATERIALS Strength and compatibility are important with a quality pour foam. Our foam is versatile and bonds well with polyester, epoxy, or vinyl ester resin coatings. It also adheres to itself so you can build multiple layers by pouring the mix in separate batches to form strong bonds between layers.
- WATERPROOF 94% RIGID CLOSED CELL FOAM Once the foam is cured, it helps prevent moisture absorption in marine and boat environments. The closed cell structure is also not affected by solvents, oil or gas.
- ENVIRONMENTALLY RESPONSIBLE At Fiberglass Warehouse, we care about the environment and about your health. That s why our pour foam contains no CFC propulsion agents or other Ozone depleting chemicals. Our materials also contain relatively low VOC emissions. Personal Protective Equipment PPE and proper ventilation is recommended during use.
- See more on Amazon...
Brand: Fiberglass Warehouse | Manufacturer: Fiberglass Warehouse
Weight: 19.00 pounds
See On Amazon #15
Marine Coat One Polyurethane Pour Foam Kit for Boat Insulation, Soundproofing, & Flotation - Waterproof Sealant High Buoyancy Expanding Foam Two Part 4 lb Density (2 Gallon)
Asin: B0BQ3YNHH2 | Ean: 0739548008963 | UPC: 739548008963
Reduces Noise Levels On Boats - The Sound-Absorbing Properties Of Polyurethane Foam Can Help Reduce Noise Levels On Boats. A Quieter And Comfortable Experience For Passengers And Crew. Our Marine Foam Can Be Poured Into Tight Spaces And Hard-To-Reach Areas..
Empower And Uplift Selfless Veterans Who Sacrificed For Our Country - Every Marine Coat One Transaction Offers Hope To Veterans Seeking A Fresh Start. Since 1992, We Have Provided Color-Matched Repair Solutions With Hands-On Application Development..
Easy-To-Install Expanding Foam - First, Prep The Area And Cover Surfaces. Measure The Two Parts Of The Marine Foam And Mix Them In A 1:1 Ratio. Pour It Into A Mold Or Cavity And Let It Cure For 24 To 48 Hours. Then Trim And Shape The Foam As Needed. Our Polyurethane Foam Is Of High Density..
No More Water Intrusion Or Damage To Your Boat's Hull - The High Buoyancy Of Polyurethane Expanding Foam Makes It Ideal For Boat Construction. Our Polyurethane Foam Is An Excellent Insulator And Helps Regulate Temperatures. It Fills In Voids, Cavities, And Other Spaces In Your Vessel..
Features
- Provides both insulation and buoyancy - Marine Coat One Polyurethane Pour Foam is a two-part expanding foam system. It is great for insulation, buoyancy, structural support, and floatation. This insulation foam is recommended for marine use and for the hulls and cavities of a boat or ship.
- No more water intrusion or damage to your boat's hull - The high buoyancy of polyurethane expanding foam makes it ideal for boat construction. Our polyurethane foam is an excellent insulator and helps regulate temperatures. It fills in voids, cavities, and other spaces in your vessel.
- Reduces noise levels on boats - The sound-absorbing properties of polyurethane foam can help reduce noise levels on boats. A quieter and comfortable experience for passengers and crew. Our marine foam can be poured into tight spaces and hard-to-reach areas.
- Easy-to-install expanding foam - First, prep the area and cover surfaces. Measure the two parts of the marine foam and mix them in a 1:1 ratio. Pour it into a mold or cavity and let it cure for 24 to 48 hours. Then trim and shape the foam as needed. Our polyurethane foam is of high density.
- Empower and uplift selfless veterans who sacrificed for our country - Every Marine Coat One transaction offers hope to veterans seeking a fresh start. Since 1992, we have provided color-matched repair solutions with hands-on application development.
- See more on Amazon...
Brand: Marine Coat One | Manufacturer: MarineCoat One
See On Amazon #16
4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Quart Kit)
Asin: B08T21WRF9 | Ean: 0819794022910 | UPC: 819794022910
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 4Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications.
4Lb. Density Polyurethane Flotation Foam 1/2 Gallon Kit; Consists Of 1 Quart Of Part A And 1 Quart Of Part B And Produces 1 Cubic Feet..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 4LB. Density polyurethane flotation Foam 1/2 Gallon Kit; Consists of 1 quart of Part A and 1 quart of Part B and produces 1 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #17
TRUE COMPOSITES Liquid Urethane Pour Foam Base-2 Part Closed Cell Rigid Pour Foam-2 lb Density-Fast-Acting Formula-Boat Buoyancy, Flotation, Filling, Soundproofing & Insulation-1/2 Gallon Kit
Asin: B079H225XM | Model: 2LBFOAMHGK | PartNumber: 2LBFOAMHGK | Ean: 0850019564013 | UPC: 850019564013
Waterproof And Durable: The Urethane Foam Is Waterproof And Durable For Long-Lasting Use In Wet Environments..
Complete Kit: The 1/2 Gallon Kit Includes Enough Foam To Cover A Small To Medium-Sized Boat Or Other Watercraft..
Easy To Apply: The Liquid Foam Can Be Easily Applied To Any Surface For Quick And Easy Buoyancy And Insulation..
High Density Foam: 2 Lb Density Foam Provides Excellent Insulation And Buoyancy For Boats And Other Watercraft..
Features
- Fast-Acting Liquid Urethane Foam: Fast-acting formula provides quick buoyancy, flotation, filling, soundproofing and insulation.
- High Density Foam: 2 lb density foam provides excellent insulation and buoyancy for boats and other watercraft.
- Waterproof and Durable: The urethane foam is waterproof and durable for long-lasting use in wet environments.
- Easy to Apply: The liquid foam can be easily applied to any surface for quick and easy buoyancy and insulation.
- Complete Kit: The 1/2 gallon kit includes enough foam to cover a small to medium-sized boat or other watercraft.
- See more on Amazon...
Brand: TRUE COMPOSITES | Manufacturer: TRUE COMPOSITES
Weight: 2.00 pounds
See On Amazon #18
True Composites 2 Part Urethane Pour Foam, 2 Lb Density, Marine Foam for Boat Flotation, Sound Proofing, Foam Insulation, Post Hole Foam, 1 Gallon Kit
Asin: B079W5G234 | Model: FOAM21G | PartNumber: FOAM21G | Ean: 0852418008396 | UPC: 852418008396
Brand: TRUE COMPOSITES | Manufacturer: TRUE COMPOSITES
See On Amazon #19
6 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boats, Dock Flotation, Carving, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)
Asin: B0CYF9MLBP | Model: POLY6LB2GK | PartNumber: POLY6LB2GK
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 6Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications.
6Lb. Density Polyurethane Flotation Foam 2 Gallon Kit; Consists Of 1 Gallon Of Part A And 1 Gallon Of Part B And Produces Approximately 2.5 Cubic Feet..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 6LB. Density polyurethane flotation Foam 2 Gallon Kit; Consists of 1 gallon of Part A and 1 gallon of Part B and produces approximately 2.5 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 6LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon
Looking For Something Else?
Search