AURSINC NanoVNA-F V2 Vector Network Analyzer, 50KHz-3GHz Antenna Analyzer Ham Radio HF VHF UHF 4.3inch screen 5000mAh Battery Measuring S-Parameters Voltage Standing Wave Ratio Phase Delay Smith Chart
Asin: B0B42C2H5V | Model: NanoVNA-F V2 | PartNumber: NanoVNA-F V2
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 1.10 x 8.66 x 4.30 inches
See On Amazon Similar To AURSINC NanoVNAF V2 Vector Network
#1
AURSINC Filter Attenuator, RF Demo Kit NanoVNA RF Tester Board for NanoVNA-H NanoVNA-F Vector Network Analyzer Kits
Asin: B08RNLDSL4
[Note] The Test Parameters Of The 18 Patterns Of The Test Board Are Described As Follows. Two Steps Must Be Performed Before Testing: Step 1. Connect The Two 20Cm Sma To Ipex Adapter Cables To The Nanovna-F Machine. Step 2. Recalibrate The Machine Using The 13 Short, 14 Open, 15 Load, And 16 Thru Circuits On The Test Board, And Save The Parameters To Save 0.
[Package Included] 1X Pcb Rf Tester Board, 2 X 20Cm U.Fl Connectors (Be Aware The Connectors On The Test Cables That Connect To The Pcb Are Only Good For A Hand-Full Of Connection/Disconnection Cycles Before They Break).
[Applicability] It Works With Nanovna-H / Nanovna-H4 / Nanovna-F / F V2 / F V3 / Nanovna Saa-2N, And Other Nanovna Antenna Analyzer.
[Tiny But Mighty] This Rf Demo Kit Is Integrated With 18 Functional Modules. Can Be Used To Measure 30Mhz Short Wave Low-Pass-Filter Lpf, 100Mhz Fm High-Pass Filter Hpf, 433Mhz Commonly Used Saw Band Pass Filter Bpf, 6.5Mhz Ceramic Trap Bsftt.
Features
- [Evaluating and Learning Nanaovna] The RF Demo Kit is a NanoVNA RF test board independently designed by BH5HNU, with a size of 10*10cm / 3.94*3.94 inch. The demo calibration board for evaluating and learning nanaovna vector network analyzer, antenna analyzer test calibration learning, making sure your setup is working
- [Tiny but Mighty] This RF Demo Kit is integrated with 18 functional modules. Can be used to measure 30MHz short wave low-pass-filter LPF, 100MHz FM high-pass filter HPF, 433MHz commonly used SAW band pass filter BPF, 6.5MHz ceramic trap BSFtt
- [Note] The test parameters of the 18 patterns of the test board are described as follows. Two steps must be performed before testing: Step 1. Connect the two 20CM SMA to IPEX adapter cables to the NanoVNA-F machine. Step 2. Recalibrate the machine using the 13 Short, 14 Open, 15 Load, and 16 Thru circuits on the test board, and save the parameters to SAVE 0
- [Applicability] It works with Nanovna-h / Nanovna-h4 / Nanovna-f / f v2 / f v3 / Nanovna saa-2n, and other nanovna antenna analyzer
- [Package Included] 1x PCB RF tester board, 2 x 20cm U.FL connectors (Be aware the connectors on the test cables that connect to the PCB are only good for a hand-full of connection/disconnection cycles before they break)
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 0.40 x 3.94 x 3.94 Inches
See On Amazon #2
AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer 50KHz-3GHz HF VHF UHF Antenna Analyzer Ham Radio Measuring S Parameters, Duplexer, Voltage Standing Wave Ratio, Phase, Delay
Asin: B08G4GXTKK | Model: 20210407 | PartNumber: 20210407 | Ean: 0753318593367 | UPC: 753318593367
✔️[Pc Connection] Nanovna Saa-2N Can Be Controlled By Pc Via Vna-Qt Software,Supported For Linux, Windows (7+), Mac Os Planned. It Also Support Nanovna-Saver For Extracting The Data For Display On A Computer, And For Saving To Touchstore Files.
✔️[Compliance] Saa-2N 3Ghz Vector Network Analyzer, Designed In Collaboration With Owocomm. Under The Lgpl License Agreement, It Is Completely Manufactured According To The V2_2 Files Issued By Owocomm At Development Department, In Line With The Original Technical Specifications.
✔️[Note Recalibrate] The Saa-2N/Nanovna_V2.2 Uses A Similar User Interface To The Nanovna, But With A Different Technical Architecture, The Saa-2N/Nanovna_V2.2 Does Not Load The Initial Calibration Data At Startup, And Does Not Automatically Interpolate The Calibration Data After The User Changes The Frequency, And Must Recalibrate Or Call Back The Calibration Data After Each Startup And Frequency Change. Please Read The User Manual Carefully Before Use To Avoid Damaging The Device.
Features
- [Frequency Range] Transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
- [Note Recalibrate] The SAA-2N/NanoVNA_V2.2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device
- [PC Connection] nanovna saa-2n can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS planned. It also support Nanovna-Saver for extracting the data for display on a computer, and for saving to Touchstore files
- [Compliance] SAA-2N 3GHz vector network analyzer, designed in collaboration with OwOComm. Under the LGPL license agreement, it is completely manufactured according to the v2_2 files issued by OwOComm at Development Department, in line with the original technical specifications
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 2.52 x 8.54 x 5.55 Inches
See On Amazon #3
Upgraded NanoVNA-F V2 Vector Network Analyzer 50kHz-3000MHz HF VHF UHF VNA Antenna Analyzer 4.3 inch with 5000mA-h,Measuring S-Parameter Voltage SWR, Phase, delay, Smith Chart
Asin: B0825PZNJJ
【Upgraded Aluminium Housing 】 Standard Aluminium Shell To Protect Sma Head And Reduce The Interference Of External Electromagnetic Wave To Instrument..
【Compact And Powerful】: Upgrade The User Program By Virtual U Disk.Switch To A Power Switch With A Greater Sense Of Operation And A Better Sense Of Operation.Support Chinese And English Menu Switching..
【Measurement Range】 The Nanovna-F Measurement Range Is 50K-3Ghz. You Can Go To The Official Website To Update And Expand The Frequency To 10Khz-1.5Ghz.The Harmonic Expansion Of The Output Signal Of The Clock Chip Si5351 Is Used To Measure The Frequency To 1000Mhz. At 600M-1Ghz, The Dynamic Range Of S11 Is 40Db (The Standing Wave Ratio Is Less Than 1.02)..
【Higher Capacity Battery,And Longer Standby Time】 Upgraded The Large Capacity 5000Ma-H 3.7V Battery, Longer Standby Time, And Extended Usb Interface. Typically, It Can Be Used As A Mobile Power Source To Charge Android Or Apple Phones When Not In Use. The Ic Is Charged By High Current 2A, And The Charging Time Is Shorter..
Features
- 4.3 inch Large Touch screen and powerful function Handheld Vector Network Analyzer using 4.3-inch IPS TFT LCD screen, with a larger view angle and can be seen clearly in strong outdoor light.which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on.
- Higher Capacity Battery,and Longer Standby time Upgraded the large capacity 5000mA-h 3.7V battery, longer standby time, and extended USB interface. Typically, it can be used as a mobile power source to charge Android or Apple phones when not in use. The IC is charged by high current 2A, and the charging time is shorter.
- Upgraded Aluminium Housing Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
- Measurement Range The NanoVNA-F measurement range is 50k-3GHz. You can go to the official website to update and expand the frequency to 10Khz-1.5Ghz.The harmonic expansion of the output signal of the clock chip SI5351 is used to measure the frequency to 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB (the standing wave ratio is less than 1.02).
- Compact and Powerful : Upgrade the user program by virtual U disk.Switch to a power switch with a greater sense of operation and a better sense of operation.Support Chinese and English menu switching.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
See On Amazon #4
Seesii NanoVNA-F V3 Vector Network Analyzer, [Upgraded] 1MHz-6GHz 4.3 Inch HF VHF UHF VNA Antenna Analyzer, Measuring S-Parameter Voltage SWR,Phase,Delay,Smith Chart,RTC Real-time,801 Scan Points
Asin: B0CCTC88RX | Model: Seesii NanoVNA-F V3 | PartNumber: Seesii NanoVNA-F V3
👍【Trustworthy Quality】:This Nano Vna Analyzer Measuring Tool Is Made Of Metal Material, Which Is Durable And Can Effectively Shield Electromagnetic Interference. With Sma Connector Design Which Can Be Used To Connect Duts Directly.In Addition,It Is Support Pc Software Control And Compatible With Nanovna-Saver For Convenient Measurement Data Transfer.Built-In 4500M-Ah Rechargeable Battery,With Type-C Charging Cable And Led Charging Indicator,It Can Be Fully Charged Within 3 Hours,No Need To Charge Frequently..
🎁【What You Will Get:】: Seesii Upgraded Value Nanovna-F V3 Kit Includes 1 X Nanovna-F V3,1 X Gold-Plated Sma Calibration Kit (Load, Open And Short),1 X Sma Female To Sma Female Connector,1 X Sma Male To Sma Male Connector,1 X Sma Jkw Connector,2 X 20Cm/7.9" Rg405 Cables,1 X Usb Type-C Data Cable. Seesii Provides 7*24 Hours Technical Service And 90-Day Money-Back Service, 3 Years Warranty Lifetime Customer Support. You Can Use It With Confidence..
🎖️【Multiple Measurement Functions】: Seesii Nanovna-F V3 Antenna Analyzer Is Suitable For Antenna Testing Of Mf/Hf/Vhf/Uhf/Shf Bands. Supports A Variety Of Display Formats: Log Mag, Linear Mag, Phase, Smith R+Jx, Smith R+L/C, Vswr, Polar, Group Delay, Resistance, Reactance, Etc. It Can Also Be Used To Measure Filters, Amplifiers, Attenuators, Cables, Power Dividers, Couplers, Duplexers And Other Rf Components. For The Amateur Radio Operator Or Radio Enthusiast, This Latest Vna Antenna Analyzer Will Be A Very Handy Analyzer To Have..
✅【Widely Frequency Range】:Compared To The Nanovna-F V2 (50Khz-3Ghz), The Upgraded Nanovna-F V3 Has 1Mhz-6Ghz Ultra-Wide Measuring Frequency Range, The S21 Dynamic Range Of Nanovna-F V3 Is 65 Db, While The S11 Dynamic Range Is 50 Db. The Scan Points Is Up To 101-801 And The Calibration Result Storage Is 12, Covering Up To The Full Low Or High Frequency Range. Faster And More Accurate Measurement Performance, You Can Easily Cope With Measurement Testes In Various Fields..
Features
- Improved Performance :This NanoVNA-F V3 vna analyzer is a new production machine from 2023, with 4.3 inch 800 x 480 large touchscreen display, 1MHz to 6GHz widely measuring range, the scan speed of NanoVNA-F V3 is up to 200 points/s and the maximum scanning points is up to 801.In addition, the nanovna analyzer supports TDR function which is useful for cable lengths measurement.
- Widely Frequency Range :Compared to the Nanovna-F V2 (50kHz-3GHz), the upgraded Nanovna-F V3 has 1MHz-6GHz ultra-wide measuring frequency range, The S21 dynamic range of NanoVNA-F V3 is 65 dB, while the S11 dynamic range is 50 dB. The scan points is up to 101-801 and the calibration result storage is 12, covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields.
- Trustworthy Quality :This nano vna analyzer measuring tool is made of metal material, which is durable and can effectively shield electromagnetic interference. With SMA connector design which can be used to connect DUTs directly.In addition,it is support PC Software control and compatible with NanoVNA-Saver for convenient measurement data transfer.Built-in 4500m-ah rechargeable battery,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.
- Multiple Measurement Functions : SeeSii NanoVNA-F V3 antenna analyzer is suitable for antenna testing of MF/HF/VHF/UHF/SHF bands. Supports a variety of display formats: Log Mag, Linear Mag, Phase, Smith R+jX, Smith R+L/C, VSWR, Polar, Group delay, Resistance, Reactance, etc. It can also be used to measure filters, amplifiers, attenuators, cables, power dividers, couplers, duplexers and other RF components. For the amateur radio operator or radio enthusiast, this latest vna antenna analyzer will be a very handy analyzer to have.
- What You Will Get: : Seesii upgraded value nanovna-f v3 kit includes 1 x NanoVNA-F V3,1 x Gold-Plated SMA Calibration Kit (LOAD, OPEN and SHORT),1 x SMA Female to SMA Female Connector,1 x SMA Male to SMA Male Connector,1 x SMA JKW Connector,2 x 20cm/7.9 RG405 Cables,1 x USB Type-C Data Cable. Seesii provides 7*24 hours technical service and 90-day money-back service, 3 years warranty lifetime customer support. You can use it with confidence.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
See On Amazon #5
AURSINC NanoVNA Vector Network Analyzer, 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Ham Radio with 2.8'' Touchscreen HW V3.5, Measuring S Parameters, Voltage Standing Wave Ratio, Phase Delay Smith Chart
Asin: B07T6LXNTV | Model: NanoVNA 2.8'' | PartNumber: NanoVNA 2.8'' | Ean: 0753318592193 | UPC: 753318592193
[Measurement Frequency] Measurement Frequency Of Nanovna Is 10Khz - 1.5Ghz (50Khz -900Mhz, Enable Extended Firmware). Measurement Range: 70Db (50Khz-300Mhz), 60Db (300M-900Mhz), 40Db (900Mhz-1.5Ghz) Enable Extended Firmware. The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz.
[Package List] 1X Nanovna Host (With 650Ma-H Battery, Without Case, Came In A Plastic Case), 1X Usb Type-C Data Cable, 2X 30Cm Sma Male To Male Rg174 Rf Cable, 1X Sma Simple Calibration Kit, 1X Sma Female To Female Connector.
[Accurate Measurement] The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring. The Ch0 Output Level Is Increased To 0Dbm When Using The Fundamental Wave, Resulting In More Accurate Reflection Measurement.
[More Functionality] Measuring Amplifier Gain, Bandwidth, Phase Frequency Characteristics, Transmission Line Loss, Characteristic Impedance, Coupler Coupling, Isolation, Filter, Diplexer Passband And So On. You Can Being Able To See A Graph Of The Swr Of A Given Antenna Over A Sweep That You Get To Set Start And Stop. Excellent Performance For Radio Amateurs.
[Pc Control] Designed A Practical And Simple Control Application On Pc, You Can Download Touchstone(Snp) Files For Radio Design And Simulation Software. There's Nanovnasharp Software Available For Pc And Linux (Github.Com/Mihtjel/Nanovna-Saver/Releases), Supports Control And Real-Time Display. You Can Connect The Nanovna To Your Pc For A Large Screen Display With A Usb-C Cable.
[Licensing And Firmware] Developed By Hugen, More Info Pls View "Nanovna-Users@Groups.Io". The Firmware Version Of Nano Vna Is Hw V3.5. It Is Upgradeable As New Firmware Is Developed (Github.Com/Ttrftech/Nanovna). The Default Firmware Of Aursinc Nanovna Main Function Is Used For Antenna Performance Measurement.
Features
- [Designed for DIY] This nanovna is a DIY product (no enclosure) that provides perfect vector network measurement capabilities in a credit card-sized design, featuring a 2.8-inch TFT touch screen (320 x240) and a 650mAh battery for up to 2 hours. Added battery management circuit to reduce power noise, USB power interference, charging current, and protects the battery
- [Licensing and Firmware] Developed by Hugen, more info pls view nanovna-users@groups.io. The firmware version of nano vna is HW V3.5. It is upgradeable as new firmware is developed (github.com/ttrftech/NanoVNA). The default firmware of AURSINC nanovna main function is used for antenna performance measurement
- [Measurement Frequency] Measurement frequency of nanovna is 10KHz - 1.5GHz (50KHz -900MHz, enable extended firmware). Measurement range: 70dB (50kHz-300MHz), 60dB (300M-900MHz), 40dB (900MHz-1.5GHz) enable extended firmware. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz
- [PC Control] Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. There's NANOVNASHARP software available for PC and Linux (github.com/mihtjel/nanovna-saver/releases), supports control and real-time display. You can connect the nanovna to your PC for a large screen display with a USB-C cable
- [Accurate Measurement] The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. The CH0 output level is increased to 0dBm when using the fundamental wave, resulting in more accurate reflection measurement
- [More Functionality] Measuring amplifier gain, bandwidth, phase frequency characteristics, transmission line loss, characteristic impedance, coupler coupling, isolation, filter, diplexer passband and so on. You can being able to see a graph of the SWR of a given antenna over a sweep that you get to set start and stop. Excellent performance for radio amateurs
- [Package list] 1x NanoVNA host (with 650mA-h battery, without case, came in a plastic case), 1x USB Type-C data cable, 2x 30cm SMA male to male RG174 RF cable, 1x SMA simple calibration kit, 1x SMA female to female connector
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 0.47 x 2.13 x 3.35 inches | Weight: 0.22 Pounds
See On Amazon #6
Upgraded AURSINC NanoVNA V2 PLUS4 Vector Network Analyzer 50kHz-4GHz 4'' Touchscreen HF VHF UHF Antenna Analyzer Measuring S Parameters, SWR, Phase, Delay, Smith Chart with 3200mAh Battery
Asin: B09FPNR9J3
✔️[Performance] With 4Inch Large Touchscreen, You Can Flip The Display(Menu - Display - Flip Display). All-Aluminum Alloy Design, Effective Anti-Interference. The Scanning Speed Of Nanovna V2 Antenna Analyzer Increases By 4 Times (400 Points/Sec). Low Temperature Drift, V2 Plus4 Automatically Internally Corrects Drift Errors To Achieve Highly Repeatable Measurements.
✔️[Larger Capacity Rechargeable Battery] The Upgraded Antenna Analyzer Is Contained With A 3200Mah/3.7V Lithium Rechargeable Battery With Loger Operating Time And Lasting Battery Life. There Are Battery Charge Led Indicators At The Back Of The Vna Which Are The Battery Fuel Gauge, The One That Is Closest To The Ch1 Port Connector Is The Lowest Charge Level Indicating ≤ 25%.
✔️[What Are Included] Aursinc Nanovna V2 Plus4 Is The Original Edition (If You Buy The Clone One The Vna Cannot Proceed The Software Update Form The Official Site) Nanovna V2 Plus4 V2.4 Comes With A 4-Piece Calibration Set - Open, Short, Load, & Thru, Two Male-Male Sma Cables, A Usb2-B To Usb2-A Cable (Black Or Silver), And A Stylus To Operate The Touch Screen Menu And Markers.
✔️[Support Pc Control] Pc Control Via Two Pc Applications (Nanovna Saver / Nanovna-Qt), Computer Software Compatible: Linux, Windows (7 Or Above), Mac Os. Support S Parameter Export And > 1024 Points Scan (Nanovna-Qt Software). Nanorfe .Com/Nanovna-V2-Software.Html.
✔️[Ultra-Wide Frequency Range] Aursinc Nanovna V2 Plus4 Provides A 50Khz-4Ghz Ultra-Wide Frequency Range With An Improved Precision And Accuration. And V2 Plus4 Does Not Use Harmonics For Measurements. The System Dynamic Range For This Nano Vna Is Reaches To 90Db Dynamic Range (1Ghz) And Reaches To 80Db Dynamic Range (3Ghz).
Features
- [ADVANCED NANOVNA] NanoVNA V2 Plus4 (S-A-A-2) is a 4GHz Transmission / Reflection vector network analyzer, measuring the S11 Reflection coefficient and the S21 Transmission coefficient of a high frequency network. With the latest version V2.4, update firmware: nanorfe .com/nanovna-versions.html
- [ULTRA-WIDE FREQUENCY RANGE] AURSINC NanoVNA V2 Plus4 provides a 50KHz-4GHz ultra-wide frequency range with an improved precision and accuration. And V2 Plus4 does not use harmonics for measurements. The system dynamic range for this nano vna is reaches to 90dB dynamic range (1GHz) and reaches to 80dB dynamic range (3GHz)
- [PERFORMANCE] With 4inch large touchscreen, you can flip the display(Menu - Display - Flip Display). All-aluminum alloy design, effective anti-interference. The scanning speed of NanoVNA V2 antenna analyzer increases by 4 times (400 points/sec). Low temperature drift, V2 Plus4 automatically internally corrects drift errors to achieve highly repeatable measurements
- [SUPPORT PC CONTROL] PC control via two PC applications (NanoVNA Saver / NanoVNA-QT), computer software compatible: Linux, Windows (7 or above), Mac OS. Support S parameter export and > 1024 points scan (NanoVNA-QT software). nanorfe .com/nanovna-v2-software.html
- [LARGER CAPACITY RECHARGEABLE BATTERY] The upgraded antenna analyzer is contained with a 3200mAh/3.7V lithium rechargeable battery with loger operating time and lasting battery life. There are battery charge LED indicators at the back of the VNA which are the battery fuel gauge, the one that is closest to the CH1 port connector is the lowest charge level indicating 25%
- [WHAT ARE INCLUDED] AURSINC NanoVNA V2 Plus4 is the Original edition (if you buy the clone one the VNA cannot proceed the software update forM the official site) NanoVNA V2 PLUS4 V2.4 comes with a 4-piece calibration set - open, short, load, & thru, two male-male SMA cables, a USB2-B to USB2-A cable (black or silver), and a stylus to operate the touch screen menu and markers
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #7
AURSINC Upgraded NanoVNA-F V3 Vector Network Analyzer 4.3 1MHz 6GHz Antenna Analyzer Ham Radio Measuring S-Parameters Voltage Standing Wave Ratio SWR, Phase, Delay, Smith Chart Support RTC Real time
Asin: B0C8TH4ZBB | Model: NanoVNA-F V3 | PartNumber: NanoVNA-F V3
[Efficient And Worthwhile] The Nano Vna Antenna Analyzer Is Made Of Metal Material, Which Is Durable And Can Effectively Shield Electromagnetic Interference. Powerful Features, Including Automatic Calibration, Pc Software Control, Compatible With Nanovna-Saver To Facilitate Measurement Data Transfer, Storage And Export. Built-In 4500M-Ah Rechargeable Battery, With C-Type Charging Cable And Led Charging Indicator, Suitable For Indoor Or Outdoor Application.
[Authentic & Package] Nanovna-F V3 Developed By Hugen. Package Include Aursinc Nanovna-F V3 Host (With 4500Mah Battery) Display: 4.3 Inch Tft X1, Sma Open/Short/Load Calibration Kit ×1, Sma-Kk Adapter ×1, Sma-Jj Adapter ×1, Sma-Jkw Adapter ×1, 20Cm Sma-Jj Rg405 Coaxial Cable ×2, Usb Type-C Cable ×1. The Vna Antenna Analyzer Provide Reliable And Accurate Measurement Results For Ham Radio Operators And Professionals..
[Multiple Measurement Functions] Nanovna-F V3 Antenna Analyzer Is Suitable For Antenna Testing Of Mf/Hf/Vhf/Uhf/Shf Bands. It Can Also Be Used To Measure Filters, Amplifiers, Attenuators, Cables, Power Dividers, Couplers, Duplexers And Other Rf Components. Supports A Variety Of Display Formats: Log Mag, Linear Mag, Phase, Smith R+Jx, Smith R+L/C, Vswr, Polar, Group Delay, Resistance, Reactance, Etc. Nano Vna Antenna Analyzer Are Widely Used, With Fast Response Time And High Operating Efficiency.
[Ultra Wide Frequency] Compared With The Nanovna F V2 (50Khz-3Ghz), The Nanovna F V3 Antenna Analyzer Measurement Range Is Improved To 1Mhz-6Ghz. It Can Be Used For S11 And S21 Measurements. The S21 Dynamic Range Of Nanovna-F V3 Is 65 Db, While The S11 Dynamic Range Is 50 Db. The Scan Points Is Up To 101-801 And The Calibration Result Storage Is 12, Covering Up To The Full Low Or High Frequency Range. The Vna Antenna Analyzers Are Versatile And Offer Faster And More Efficient Operation.
Features
- [Upgraded Performance] nanovna f v3 with 4.3inch (800x480pixel) touchscreen display, 1MHz to 6GHz widely measuring range. With the optimally designed signal processing system, the scan speed is up to 200 points/s and the maximum scanning points is up to 801. The RF interface of antenna analyzer is SMA connector witch can be used to connect DUTs directly and the nanovna analyzer supports TDR function for cable lengths measurement
- [Ultra Wide Frequency] Compared with the nanovna f v2 (50kHz-3GHz), the nanovna f v3 antenna analyzer measurement range is improved to 1MHz-6GHz. It can be used for S11 and S21 measurements. The S21 dynamic range of NanoVNA-F V3 is 65 dB, while the S11 dynamic range is 50 dB. The scan points is up to 101-801 and the calibration result storage is 12, covering up to the full low or high frequency range. The vna antenna analyzers are versatile and offer faster and more efficient operation
- [Efficient and Worthwhile] The nano vna antenna analyzer is made of metal material, which is durable and can effectively shield electromagnetic interference. Powerful features, including automatic calibration, PC software control, compatible with NanoVNA-Saver to facilitate measurement data transfer, storage and export. Built-in 4500m-ah rechargeable battery, with C-type charging cable and LED charging indicator, suitable for indoor or outdoor application
- [Multiple Measurement Functions] NanoVNA-F V3 antenna analyzer is suitable for antenna testing of MF/HF/VHF/UHF/SHF bands. It can also be used to measure filters, amplifiers, attenuators, cables, power dividers, couplers, duplexers and other RF components. Supports a variety of display formats: Log Mag, Linear Mag, Phase, Smith R+jX, Smith R+L/C, VSWR, Polar, Group delay, Resistance, Reactance, etc. Nano vna antenna analyzer are widely used, with fast response time and high operating efficiency
- [Authentic & Package] NanoVNA-F V3 developed by Hugen. Package include AURSINC NanoVNA-F V3 host (with 4500mAh battery) display: 4.3 inch TFT x1, SMA OPEN/SHORT/LOAD calibration kit 1, SMA-KK adapter 1, SMA-JJ adapter 1, SMA-JKW adapter 1, 20cm SMA-JJ RG405 coaxial cable 2, USB type-C cable 1. The vna antenna analyzer provide reliable and accurate measurement results for ham radio operators and professionals.
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Weight: 1.39 Pounds
See On Amazon #8
AURSINC NanoVNA-H4 Vector Network Analyzer 10KHz-1.5GHz + NanoVNA USB C & USB 3.0 OTG Card Reader with 32GB Micro SD Card
Asin: B0BHQJT66F
✔️[Antenna Performance Measurement] The Default Firmware Main Function For Nanovna-H4 Vector Network Analyzer Is Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring.
✔️ [What Are Included?] Nanovna-H4 Host (With Battery) X1, Usb Type-C Data Cable X1, Card Reader With 32Gb Micro Sd Card，30Mm Sma Male To Male Rg174 Rf Cable X2, Sma Simple Calibration Kit X1, Sma Female To Female Connector X1. Note: The Nanovna Is Only Compatible With The Low-Speed And Supports Spi Mode Sd Cards For Now..
✔️[Pc Control] Using Pc Software Nanovnasaver, Nanovna-H4 Antenna Analyzer Can Connect To A Nanovna And Extracts The Data For Display On A Computer, And For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.
✔️[Improved Frequency Algorithm] The Improved Frequency Algorithm Of Nanovna-H4 Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics;The Metal Shield Is Designed To Reduce The External Interference And Improve The Measurement Accuracy.
Features
- [2022 Upgraded Nanovna-H4 HW V4.3] Latest features: with latest HW 4.3 version, Nanovna-H4 is added a brand new panel plus added a new SD port for data storage(support up to 32GB memory card, not included in the package). The NanoVNA-H4 vector network analyzer is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4-inch LCD display, portable with 1950mAh battery powered or USB powered
- [Improved Frequency Algorithm] The improved frequency algorithm of NanoVNA-H4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics;The metal shield is designed to reduce the external interference and improve the measurement accuracy
- [Antenna Performance Measurement] The default firmware main function for NanoVNA-H4 vector network analyzer is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
- [PC Control] Using PC software NanoVNASaver, NanoVNA-H4 antenna analyzer can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software
- [What are Included?] NanoVNA-H4 host (with battery) x1, USB Type-C data cable x1, Card Reader with 32GB Micro SD Card 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1. NOTE: the Nanovna is only compatible with the low-speed and supports SPI mode SD cards for now.
- See more on Amazon...
Brand: AURSINC
See On Amazon #9
AURSINC NanoVNA SAA-V2 Vector Network Analyzer 50KHz -3GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 1950mAh
Asin: B089DJXMX3 | Ean: 0753318593251 | UPC: 753318593251
[Pc Connection] The Saa-V2 Nanovna Can Be Controlled By Pc Via Vna-Qt Software,Supported For Linux, Windows (7+), Mac Os Planned. It Also Supports Nanovna-Saver For Extracting The Data For Displaying On A Computer, And For Saving To Touchstore Files..
[Flip Display] For A Much More Convenient Usage, You Can Flip The Display As The Following Steps: Menu - Display - Flip Display. Package Include S-A-A-2 Host (With Battery) X1, Micro Usb Data Cable X1, 30Cm Sma Male To Male Ss405 Rf Cable X2, Sma Male Calibration Kit - Open X1,Sma Male Calibration Kit - Short X1,Sma Male Calibration Kit - Load X1,Sma Female To Female Connector X1.
[Multiple Function] The Default Firmware Main Function Is Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters..
[New Upgraded Version] The S-A-A-2/Nanovna_V2 Uses A Similar User Interface To The Nanovna, But With A Different Technical Architecture, The S-A-A-2/Nanovna_V2 Does Not Load The Initial Calibration Data At Startup, And Does Not Automatically Interpolate The Calibration Data After The User Changes The Frequency, And Must Recalibrate Or Call Back The Calibration Data After Each Startup And Frequency Change. Please Read The User Manual Carefully Before Use To Avoid Damaging The Device..
Features
- [IMPROVED TO 3G] The SAA-V2 vector network analyzer has been impooved to 3G; Transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: 50dB(50KHz-1.5GHz), 40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
- [NEW UPGRADED VERSION] The S-A-A-2/NanoVNA_V2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the S-A-A-2/NanoVNA_V2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.
- [PC CONNECTION] the SAA-V2 NANOVNA can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS planned. It also supports Nanovna-Saver for extracting the data for displaying on a computer, and for saving to Touchstore files.
- [MULTIPLE FUNCTION] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters.
- [Flip Display] For a much more convenient usage, you can flip the display as the following steps: Menu - Display - Flip Display. Package include S-A-A-2 host (with battery) x1, Micro USB data cable x1, 30cm SMA male to male SS405 RF cable x2, SMA male calibration kit - OPEN x1,SMA male calibration kit - SHORT x1,SMA male calibration kit - LOAD x1,SMA female to female connector x1
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #10
AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer 50KHz-3GHz & Nanovna Testboard Kit
Asin: B0B11LF79G
✔️The Saa-2N/Nanovna_V2.2 Uses A Similar User Interface To The Nanovna, But With A Different Technical Architecture, The Saa-2N/Nanovna_V2.2 Does Not Load The Initial Calibration Data At Startup, And Does Not Automatically Interpolate The Calibration Data After The User Changes The Frequency, And Must Recalibrate Or Call Back The Calibration Data After Each Startup And Frequency Change. Please Read The User Manual Carefully Before Use To Avoid Damaging The Device.
✔️ Note: The New Batch Of Saa2n Analyzers Have Been Upgraded To The Laser Labeling On The Control Dashboard, So You Might Find It Difficult To Read At The First Sight, The Former Labeling Is Easy To Fade After Long-Time Usage, And We Are Still Working On It. Pc Connection: The Device Can Be Controlled By Pc Via Vna-Qt Software,Supported For Linux, Windows (7+), Mac Os Planned. It Also Support Nanovna-Saver For Extracting The Data For Display On A Computer, And For Saving To Touchstore Files.
✔️Transmission Mearsure S21: 70Db(50Khz-1.5Ghz), 60Db(1.5Ghz-3Ghz). Reflection Measure S11: -50Db(50Khz-1.5Ghz), -40Db(1.5Ghz-3Ghz); Antenna Analyzer: 1.005(50Khz - 1.5Ghz), 1.02(1.5Ghz-3Ghz); Flip Display, You Can Flip The Display For Your Convenience Usage.
✔️ 3Ghz Vector Network Analyzer, Designed In Collaboration With Owocomm. Under The Lgpl License Agreement, It Is Completely Manufactured According To The V2_2 Files Issued By Owocomm At Development Department, In Line With The Original Technical Specifications，Please Refer To Below Path To Get The Firmware Updated: Drive. Google .Com/Drive/Folders/1Lr7aotg2pahybzdfaipvztmzkfo14pmj.
Features
- Upgraded Version: Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier
- 3GHz vector network analyzer, designed in collaboration with OwOComm. Under the LGPL license agreement, it is completely manufactured according to the v2_2 files issued by OwOComm at Development Department, in line with the original technical specifications please refer to below path to get the firmware updated: drive. google .com/drive/folders/1Lr7AOTg2pAhYBZDfaiPVZTMZkFO14PMj
- The SAA-2N/NanoVNA_V2.2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device
- Transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz); Flip Display, you can flip the display for your convenience usage
- NOTE: The new batch of SAA2N analyzers have been upgraded to the laser labeling on the control dashboard, so you might find it difficult to read at the first sight, the former labeling is easy to fade after long-time usage, and we are still working on it. PC Connection: the device can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS planned. It also support Nanovna-Saver for extracting the data for display on a computer, and for saving to Touchstore files
- See more on Amazon...
Brand: AURSINC
See On Amazon #11
[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz + USB C & USB 3.0 OTG SD Card Reader and 32GB SD Card
Asin: B0BGS76W27
[Strong And Secure Power Supply] This Vna Is Battery Powered Or Usb Powered; Built In 650Mah Battery, Could Work For 2 Hours Continuously, If Need Extra Working Time, It Can Be Connected To Power Bank Or Power Source..
Note: Our Nanovna Is Only Compatible With Low-Speed And Supports Spi Mode Sd Card For Now ; Package Include Nanovna Host (With Battery) Display: 2.8 Inch Tft X1, Usb Type-C Data Cable X1, 30Mm Sma Male To Male Rg174 Rf Cable X2, Sma Simple Calibration Kit X1, Sma Female To Female Connector X1.
[Multiple Functions] The Default Firmware Main Function Is Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring. Designed A Practical And Simple Control Application On Pc, You Can Download Touchstone(Snp) Files For Radio Design And Simulation Software.
[Improved Frequency Algorithm: The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.
Features
- [2022 UPGRADED HW V3.6] NEW HW VERSION: V3.6 with MicroSD card port now can have the measurement data or the screenshots saved in the it at anytime. Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable( original PCB needs OTG cable), see a clear HD image on your phone. Added a caase, which is protective and dust-proof. Disply: 2.8 inch TFT (320 x240)
- [IMPROVED FREQUENCY ALGORITHM: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
- [STRONG AND SECURE POWER SUPPLY] This VNA is battery powered or USB powered; Built in 650mAh battery, could work for 2 hours continuously, if need extra working time, it can be connected to power bank or power source.
- [MULTIPLE FUNCTIONS] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software
- NOTE: Our nanovna is only compatible with low-speed and supports SPI mode SD card for now ; Package include NanoVNA host (with battery) display: 2.8 inch TFT x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1
- See more on Amazon...
Brand: AURSINC
See On Amazon #12
Upgrated AURSINC NanoVNA V3 NanoRFE VNA6000 Vector Network Analyzer 50kHz-6GHz HF VHF UHF Portable Antenna Analyzer Ham Radio with 4'' Touchscreen Measuring S Parameters, SWR, Phase, Delay,Smith Chart
Asin: B0BKL57ZWL
✔️[Larger Capacity Rechargeable Battery] The Upgraded Vector Network Analyzer Is Contained With A 3200Mah/3.7V Lithium Rechargeable Battery With Loger Operating Time And Lasting Battery Life. Also There Are Battery Charge Led Indicators At The Back Of The Vna Which Are The Battery Fuel Gauge, The One That Is Closest To The Ch1 Port Connector Is The Lowest Charge Level Indicating ≤ 25%.
✔️[Extensible Feature] The Adjustable Ifbw Of The Vna600 Enables Optimal Tradeoff Between Measurement Speed And Noise And Can Measure Narrowband Devices; Flip Display, For Your Using Convenience, You Can Flip The Display As The Following Steps: Menu - Display - Flip Display.
✔️[Pc Control] The Antenna Analyzer Is Equipped With S Parameters Export, Automatic Continuous Data Acquisition, Custom Calibration Kit Parameters Along With Support Pc Software Control, Like Windows (Above 7), Linux, Macos, The Vna Can Be More Compatible With Pc And Antenna Measurements, When Measuring The Frequency.
✔️ [Ultra-Wide Frequency Range] Compared To The Previous Nanovnas (10Khz-1.5/3Ghz), Aursinc Nanovna Nanorfe Vna6000 Provides A 50Khz-6Ghz Ultra-Wide Frequency Range With An Improved Precision And Accuration, Moreover, The System Dynamic Range For This Vna Is Up To 95Db Dynamic Range.
Features
- [Upgrade NANOVNA] ORIGINAL NanoRFE VNA6000 is a 6GHz Transmission/Reflection vector network analyzer, measuring the S11 Reflection coefficient and the S21 Transmission coefficient of a high frequency network; Not only testing standing wave impedance of the antenna, but also can debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier
- [ULTRA-WIDE FREQUENCY RANGE] Compared to the previous NanoVNAs (10KHz-1.5/3GHz), AURSINC NanoVNA NanoRFE VNA6000 provides a 50KHz-6GHz ultra-wide frequency range with an improved precision and accuration, Moreover, the System dynamic range for this VNA is up to 95dB dynamic range
- [LARGER CAPACITY RECHARGEABLE BATTERY] The upgraded vector network analyzer is contained with a 3200mAh/3.7V lithium rechargeable battery with loger operating time and lasting battery life. Also there are battery charge LED indicators at the back of the VNA which are the battery fuel gauge, the one that is closest to the CH1 port connector is the lowest charge level indicating 25%
- [PC CONTROL] The antenna analyzer is equipped with S parameters export, Automatic continuous data acquisition, Custom calibration kit parameters along with support PC software control, like Windows (above 7), Linux, MacOS, the VNA can be more compatible with PC and antenna measurements, when measuring the frequency
- [Extensible Feature] The Adjustable IFBW of the VNA600 enables optimal tradeoff between measurement speed and noise and can measure narrowband devices; Flip Display, for your using convenience, you can flip the display as the following steps: Menu - Display - Flip Display
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 3.39 x 4.72 x 1.18 inches
Warranty: 1 year
See On Amazon #13
AURSINC Filter Attenuator RF Demo Kit NanoVNA RF Tester Board&SMA Calibration Kits Test and 2 pcs
Asin: B0D631SGXR
[Nanovna Rf Tester Board] The Test Parameters Of The 18 Patterns Of The Test Board Are Described As Follows. Two Steps Must Be Performed Before Testing: Step 1. Connect The Two 20Cm Sma To Ipex Adapter Cables To The Nanovna-F Machine. Step 2. Recalibrate The Machine Using The 13 Short, 14 Open, 15 Load, And 16 Thru Circuits On The Test Board, And Save The Parameters To Save 0.
[Sma Calibration Kits Test And 2 Pcs] This Calibration Kits Can Use To Calibrate Vector Network Analyzer, Like Nanovna, Nanovna-H, Nanovna-H4, Nanovna Saa-2N, Nanovna F, Mini1300, Ps100 And So On.
[Sma Calibration Kits Test And 2 Pcs] Frequency: Dc To 3Ghz. Connector: Sma Male For Short And Load. Material: Copper, Shape: Circle. Inpedance: 50 Ohm. Vswr: Less Than 1.1.
[Nanovna Rf Tester Board] This Rf Demo Kit Is Integrated With 18 Functional Modules. Can Be Used To Measure 30Mhz Short Wave Low-Pass-Filter Lpf, 100Mhz Fm High-Pass Filter Hpf, 433Mhz Commonly Used Saw Band Pass Filter Bpf, 6.5Mhz Ceramic Trap Bsftt.
Features
- [NanoVNA RF Tester Board] The RF Demo Kit is a NanoVNA RF test board independently designed by BH5HNU, with a size of 10*10cm / 3.94*3.94 inch. The demo calibration board for evaluating and learning nanaovna vector network analyzer, antenna analyzer test calibration learning, making sure your setup is working
- [NanoVNA RF Tester Board] This RF Demo Kit is integrated with 18 functional modules. Can be used to measure 30MHz short wave low-pass-filter LPF, 100MHz FM high-pass filter HPF, 433MHz commonly used SAW band pass filter BPF, 6.5MHz ceramic trap BSFtt
- [NanoVNA RF Tester Board] The test parameters of the 18 patterns of the test board are described as follows. Two steps must be performed before testing: Step 1. Connect the two 20CM SMA to IPEX adapter cables to the NanoVNA-F machine. Step 2. Recalibrate the machine using the 13 Short, 14 Open, 15 Load, and 16 Thru circuits on the test board, and save the parameters to SAVE 0
- [SMA Calibration Kits Test and 2 pcs] Frequency: DC to 3GHz. Connector: SMA male for Short and Load. Material: Copper, Shape: Circle. Inpedance: 50 Ohm. VSWR: less than 1.1
- [SMA Calibration Kits Test and 2 pcs] This Calibration kits can use to calibrate Vector Network Analyzer, like Nanovna, Nanovna-H, Nanovna-h4, Nanovna SAA-2N, Nanovna F, mini1300, PS100 and so on
- See more on Amazon...
Brand: AURSINC
See On Amazon #14
AURSINC NanoVNA-H4 Vector Network Analyzer Lastest V4.3 10KHz-1.5GHz + TinySA Ultra Spectrum Analyzer 4inch - V0.4.5.1 100kHz-5.3GHz Handheld Frequency Analyzer
Asin: B0D47CVR8P
【Antenna Performance Measurement】The Default Firmware Main Function For Vector Network Analyzer Is Used For Antenna Performance Measurement. It Has Good Rf Performance For S-Parameter Measurements As Previous Models. Note: The Nanovna Is Only Compatible With The Low-Speed And Supports Spi Mode Sd Cards For Now. It Is Very Efficient Vector Testing For Ham Radio Operator, Research Electrical Engineer And Antenna Builders.
【Tinysa Ultra 2 In 1 Device】When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator, Mf/Hf/Vhf Sinus Output Between 100Khz-800Mhz, Uhf Square Wave Output Between 800Mhz-4.4Ghz, Mixing Signal Output Is Between 4.4Ghz-5.4Ghz. Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Inputcalibration. The Tinysa Ultra Contains All The Components Of A Conventional Heterodyne Swept Spectrum Analyzer.
【Tinysa Ultra】Tinysa Ultra Developed By Hugen, Hw V0.4.5.1. With 4Inch Touch Screen(480*320 Pixels Resolution), Tinysa Ultra Spectrum Analyzer Has Ultra Measurement Range From 100Khz To 5.3Ghz, Built-In 32Gb Micro Sd Card For Data Transfer And Storage. Linear Power Supply To Avoid Switching Noise.
【Improved Frequency Algorithm】The Improved Frequency Algorithm Of Nano Vna H4 Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic. The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics. Used It To Check Out New Cable Or Antenna Installations And To Routinely Adjust The Rf Tuner For Optimum.
Features
- UPGRADED NANOVNA-H4 V4.3 AURSINC nanovna h4 is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4inch LCD display, with 1950mAh battery powered or USB powered. With latest HW 4.3 version, Nanovna-h4 antenna analyzer is added a brand new panel plus added a new SD port for data storage(support up to 32GB memory card, not included in the package)
- IMPROVED FREQUENCY ALGORITHM The improved frequency algorithm of nano vna h4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. Used it to check out new cable or antenna installations and to routinely adjust the RF tuner for optimum
- ANTENNA PERFORMANCE MEASUREMENT The default firmware main function for vector network analyzer is used for antenna performance measurement. It has good RF performance for S-parameter measurements as previous models. NOTE: the Nanovna is only compatible with the low-speed and supports SPI mode SD cards for now. It is very efficient vector testing for ham radio operator, research electrical engineer and antenna builders
- TinySA Ultra Tinysa Ultra developed by Hugen, HW V0.4.5.1. With 4inch touch screen(480*320 pixels resolution), tinysa ultra spectrum analyzer has ultra measurement range from 100kHz to 5.3GHz, built-in 32Gb micro SD card for data transfer and storage. Linear power supply to avoid switching noise
- TinySA Ultra 2 in 1 Device When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 100kHZ-800MHz, UHF square wave output between 800mHz-4.4GHz, Mixing signal output is between 4.4GHz-5.4GHz. Built-in calibration signal generator that is used for automatic self test and low inputcalibration. The TinySA ULTRA contains all the components of a conventional heterodyne swept spectrum analyzer
- See more on Amazon...
Brand: AURSINC
See On Amazon #15
[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer+ TinySA Ultra Spectrum Analyzer 4inch - HW V0.4.5.1 100kHz-5.3GHz Handheld Frequency Analyzer with 32Gb Card
Asin: B0D1TV475J
[Nanovna-H] The Default Firmware Main Function Is Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring. The Ch0 Output Level Is Increased To 0Dbm When Using The Fundamental Wave, Resulting In More Accurate Reflection Measurement.
[Tinysa 4Inch]Tiny Sa Ultra Has An Ultra Wide Measuring Frequency Range Of 100Khz To 5.3Ghz, Spectrum Analyzer For 100Khz-800Mhz And Ultra Mode Up To 6Ghz, Can Observe Signals Up To 12Ghz. Switchable Resolution Bandpass Filters From 200Hz To 850Khz, You Could Fast And Accurate Execute Measurement Tests.
[Tinysa 4Inch] Aursinc Tinysa Ultra Developed By Hugen, Hardware Version V0.4.5.1. Now Have New Hardware System V0.4.5.1.1 - Updated Lcd Screen For Availability Reasons. With The New Esd Protection Function, The Product Has A Higher Anti-Static Level And A Longer Service Life. Linear Power Supply To Avoid Switching Noise.
[Nanovna-H]The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.
Features
- [NanoVNA-H] New HW Version V3.6. It is upgradeable as new firmware is developed. With MicroSD card port now can have the measurement data or the screenshots saved in the it at anytime. Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable (original PCB needs OTG cable), see a clear HD image on your phone. Added a ABS case, which is protective and dust-proof. Disply: 2.8 inch TFT (320 x240)
- [NanoVNA-H]The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
- [NanoVNA-H] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. The CH0 output level is increased to 0dBm when using the fundamental wave, resulting in more accurate reflection measurement
- [TinySA 4inch] AURSINC tinysa ultra developed by Hugen, hardware version V0.4.5.1. Now have new hardware system V0.4.5.1.1 - Updated LCD screen for availability reasons. With the new ESD protection function, the product has a higher anti-static level and a longer service life. Linear power supply to avoid switching noise
- [TinySA 4inch]Tiny SA Ultra has an ultra wide measuring frequency range of 100kHz to 5.3GHz, spectrum analyzer for 100kHz-800MHz and Ultra mode up to 6GHz, can observe signals up to 12GHz. Switchable resolution bandpass filters from 200Hz to 850kHz, you could fast and accurate execute measurement tests
- See more on Amazon...
Brand: AURSINC
See On Amazon #16
AURSINC TinySA Ultra Spectrum Analyzer 4inch, Handheld Frequency Analyzer with 32Gb Card + NanoVNA-F V2 Vector Network Analyzer 4.3inch Touchscreen
Asin: B0CZN2VXS4
[Tinysa Ultra] This Spectrum Analyzer Can Connect To A Pc Via Usb, Realize The Usb Serial (Cdc) Protocol, And Can Be Invoke A Large Number Of Commands Through The Serial Interface. These Commands Can Be Used To Perform Measurements Or Update Internal Settings. Built-In Linux Drivers, Windows Drivers Are Automatically Installed When Connected To A Windows Pc. Tinysa-App Directly Transfers Data To The Computer.
[Nanovna-F V2] The Measurement Range Of Nanovna-F V2 Expanded To 50Khz-3Ghz. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters, S21 Dynamic Ranges: 70Db (1.5Ghz), 60Db (3Ghz); S11 Dynamic Ranges: 50Db (1.5Ghz), 40Db (3Ghz). Rugged And Durable Aluminum Alloy Cases, Shielding Electromagnetic Interference To Ensure Precise Measurements..
[Nanovna-F V2] The Nanovna-F V2 Upgraded To The Latest Firmware V0.4.0, The Operation Page Is Compatible With Nanovna-F. More Features That It Enables Measurements Of S-Parameter, Voltage Standing Wave Ratio (Swr), Phase Map, Group Delay, Smith Chart, Delay, Polar, Linear And More.
[Tinysa Ultra] Tinysa Ultra Measures From 100Khz - 5.3Ghz: Spectrum Analyzer For 0.1-800Mhz, With Ultra Mode Enabled, Level Calibrated Up To 6Ghz, Can Observe Signals Up To 12Ghz. Switchable Resolution Bandpass Filters From 200Hz To 850Khz. Color Display Showing Max 450 Points Providing Gapless Covering Up To The Full Frequency Range. You Can Fast And Accurate Execute Measurement Tests.
Features
- [UPGRADED TINYSA ULTRA] Developed by Hugen, hardware version V0.4.5.1. Now have new hardware system V0.4.5.1.1 - Updated LCD screen for availability reasons. With 4in touch screen with 480*320 pixels resolution, Tinysa ULTRA spectrum analyzer owns a larger measurement range from 100kHz to 5.3GHz, new ESD protection function, built-in 32Gb micro SD card for data transfer and storage, Linear power supply to avoid switching noise
- [TINYSA ULTRA] TinySA ULTRA measures from 100KHz - 5.3GHz: Spectrum Analyzer for 0.1-800MHz, with Ultra mode enabled, level calibrated up to 6GHz, can observe signals up to 12GHz. Switchable resolution bandpass filters from 200Hz to 850kHz. Color display showing max 450 points providing gapless covering up to the full frequency range. You can fast and accurate execute measurement tests
- [TINYSA ULTRA] This spectrum analyzer can connect to a PC via USB, realize the USB serial (CDC) protocol, and can be invoke a large number of commands through the serial interface. These commands can be used to perform measurements or update internal Settings. Built-in Linux drivers, Windows drivers are automatically installed when connected to a Windows PC. Tinysa-APP directly transfers data to the computer
- [NANOVNA-F V2] The NanoVNA-F V2 upgraded to the latest Firmware V0.4.0, the operation page is compatible with Nanovna-F. More features that it enables measurements of S-parameter, voltage standing wave ratio (SWR), phase map, group delay, Smith chart, DELAY, POLAR, LINEAR and more
- [NANOVNA-F V2] The measurement range of nanovna-f v2 expanded to 50KHz-3GHz. The TX/RX method can measure the complete S11 and S21 parameters, S21 dynamic ranges: 70dB (1.5GHz), 60dB (3GHz); S11 dynamic ranges: 50dB (1.5GHz), 40dB (3GHz). Rugged and durable aluminum alloy cases, shielding electromagnetic interference to ensure precise measurements.
- See more on Amazon...
Brand: AURSINC
See On Amazon #17
AURSINC Upgraded NanoVNA V2 Plus5 (V2 PLUS4 Pro) Vector Network Analyzer 50kHz-4GHz with 4'' Touchscreen Antenna Analyzer HF VHF UHF Added Bandwidth Adjustment Function Measuring Narrowband Device
Asin: B0CZ418T86 | Model: NanoVNA V2 Plus5 | PartNumber: NanoVNA V2 Plus5
[Support Pc Control] Pc Control Via Two Pc Applications (Nanovna Saver / Nanovna-Qt), Computer Software Compatible: Linux, Windows (7 Or Above), Mac Os. It Works Well With A Computer To Print Out Standing Wave Ratios, Smith Charts And Other Antenna Related Information Over Various Frequency Ranges.
[What Are Included] 1X Nanovna V2 Plus5 (V2 Plus4 Pro), 4 X Calibration Set - Open, Short, Load, & Thru, 2X Male To Male Sma Cables, 1X Usb2-B To Usb2-A Cable (Black Or Silver), 1X Stylus To Operate The Touch Screen Menu And Markers.
[Larger Capacity Rechargeable Battery] The Upgraded Vector Network Analyzer Is Contained With A 3200Mah/3.7V Lithium Rechargeable Battery With Loger Operating Time And Lasting Battery Life. Also There Are Battery Charge Led Indicators At The Back Of The Vna Which Are The Battery Fuel Gauge, The One That Is Closest To The Ch1 Port Connector Is The Lowest Charge Level Indicating ≤ 25%.
[Advanced Frequency Range] Nanovna V2 Plus5 Is A 4Ghz T/R Vector Network Analyzer Developed By Hcxqs In Collaboration With Owocomm. Compared To Earlier Nanovna Versions, V2 Does Not Use Harmonics For Measurements And Reaches To 90Db Dynamic Range. Nanovna V2 Plus5 Provides A 50Khz-4Ghz Frequency Range, Has Improved Shielding That Achieves High Dynamic Range With An Aluminum Enclosure.
Features
- [Upgraded NanoVNA V2 Plus5] Compared to NanoVNA V2 PLUS4, the V2 PLUS4 Pro has the same appearance as the plus4, with a few more options in the menu. Update: 1. Hardware added bandwidth adjustment function; 2. It can measure narrowband devices, such as crystal oscillators; 3. The maximum scan speed is faster than before, the default parameter is 0.16 seconds per scan, instead of 0.25 seconds
- [ADVANCED FREQUENCY RANGE] NanoVNA V2 Plus5 is a 4GHz T/R vector network analyzer developed by HCXQS in collaboration with OwOComm. Compared to earlier NanoVNA versions, V2 does not use harmonics for measurements and reaches to 90dB dynamic range. NanoVNA V2 Plus5 provides a 50KHz-4GHz frequency range, has improved shielding that achieves high dynamic range with an aluminum enclosure
- [SUPPORT PC CONTROL] PC control via two PC applications (NanoVNA Saver / NanoVNA-QT), computer software compatible: Linux, Windows (7 or above), Mac OS. It works well with a computer to print out Standing Wave Ratios, Smith Charts and other Antenna related information over various frequency ranges
- [LARGER CAPACITY RECHARGEABLE BATTERY] The upgraded vector network analyzer is contained with a 3200mAh/3.7V lithium rechargeable battery with loger operating time and lasting battery life. Also there are battery charge LED indicators at the back of the VNA which are the battery fuel gauge, the one that is closest to the CH1 port connector is the lowest charge level indicating 25%
- [WHAT ARE INCLUDED] 1x NanoVNA V2 Plus5 (V2 PLUS4 Pro), 4 x Calibration set - open, short, load, & thru, 2x Male to Male SMA cables, 1x USB2-B to USB2-A cable (black or silver), 1x stylus to operate the touch screen menu and markers
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSIINC
Weight: 1.07 pounds
See On Amazon #18
AURSINC NanoVNA-F V2 Vector Network Analyzer 50KHz-3GHz Antenna Analyzer 4.3inch Screen + Handheld Antenna Cable - RF Coax SMA Male to UHF Female SO-239 Cable * 2-Pack for RF Applications
Asin: B0CXH9GWX6
[Nanovna F V2] 4.3'' Screen & 5000Mah Battery - The Nanovna Has A 4.3-Inch Ips Tft Lcd Screen With A Resolution Of 800*480 And A Resistive Touch Screen, Providing A Large Viewing Angle. It Is Equipped With An 5000Mah Lithium Battery For Longer Standby Time, Up To 7 Hours Of Usage. With The Use Of A 2A Large-Current Charging Ic, The Charging Time Is Reduced. As An Add-On, It Built-In 5V Output For Charging Android Phones Or Tablets.
[Rf Coax Sma Male To Uhf Female So-239C] Cable Type: Rg316 Coaxial Copper Low-Loss; Adapter: Sma Male To So239 (Uhf Female) Straight Adapter.
[Rf Coax Sma Male To Uhf Female So-239C] Extension Antenna Cable (Rg316). Impedance: 50 Ohm, Rg316 Copper Cable, Cable Length: 60Cm/2Ft.
[Nanovna F V2] Frequency Range - The Measurement Range Of Nanovna-F V2 Expanded To 50Khz-3Ghz. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters, S21 Dynamic Ranges: 70Db (1.5Ghz), 60Db (3Ghz); S11 Dynamic Ranges: 50Db (1.5Ghz), 40Db (3Ghz).
Features
- [nanovna f v2] The NanoVNA-F V2 upgraded to the latest Firmware 0.4.0, the operation page is compatible with Nanovna-F. It enables measurements of S-parameter, voltage standing wave ratio (SWR), phase map, group delay, Smith chart, DELAY, POLAR, LINEAR and more
- [nanovna f v2] Frequency Range - The measurement range of nanovna-f v2 expanded to 50KHz-3GHz. The TX/RX method can measure the complete S11 and S21 parameters, S21 dynamic ranges: 70dB (1.5GHz), 60dB (3GHz); S11 dynamic ranges: 50dB (1.5GHz), 40dB (3GHz)
- [nanovna f v2] 4.3'' Screen & 5000mAh Battery - The nanovna has a 4.3-inch IPS TFT LCD screen with a resolution of 800*480 and a resistive touch screen, providing a large viewing angle. It is equipped with an 5000mAh lithium battery for longer standby time, up to 7 hours of usage. With the use of a 2A large-current charging IC, the charging time is reduced. As an add-on, it built-in 5V output for charging Android phones or tablets
- [RF Coax SMA Male to UHF Female SO-239C] Extension Antenna Cable (RG316). Impedance: 50 Ohm, RG316 Copper Cable, Cable Length: 60cm/2ft
- [RF Coax SMA Male to UHF Female SO-239C] Cable Type: RG316 coaxial copper low-loss; Adapter: SMA Male to so239 (UHF Female) Straight Adapter
- See more on Amazon...
Brand: AURSINC
See On Amazon #19
AURSINC NanoVNA-F V2 Vector Network Analyzer 50KHz-3GHz Antenna Analyzer 4.3inch Screen with 5000mAh + Filter Attenuator RF Demo Kit NanoVNA RF Tester Board
Asin: B0CXDLKJK2
[Nanovna-F V2] 4.3'' Screen & 5000Mah Battery - The Nanovna Has A 4.3-Inch Ips Tft Lcd Screen With A Resolution Of 800*480 And A Resistive Touch Screen, Providing A Large Viewing Angle. It Is Equipped With An 5000Mah Lithium Battery For Longer Standby Time, Up To 7 Hours Of Usage. With The Use Of A 2A Large-Current Charging Ic, The Charging Time Is Reduced. As An Add-On, It Built-In 5V Output For Charging Android Phones Or Tablets.
[Rf Demo Kit] Has 18 Functional Modules- The Board Is Totally Integrated With 18 Functional Modules. Can Be Used To Measure 30Mhz Short Wave Low-Pass-Filter Lpf, 100Mhz Fm High-Pass Filter Hpf, 433Mhz Commonly Used Saw Band Pass Filter Bpf, 6.5Mhz Ceramic Trap Bsftt.
[Rf Demo Kit] This A Nanovna Rf Test Board Independently Designed By Bh5hnu, With A Size Of 10 * 10Cm. The Vna Test Board Demo Calibration Board For Learning Nanaovna Vector Network Analyzer, Antenna Analyzer Test Calibration Learning..
[Nanovna-F V2] Frequency Range - The Measurement Range Of Nanovna-F V2 Expanded To 50Khz-3Ghz. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters, S21 Dynamic Ranges: 70Db (1.5Ghz), 60Db (3Ghz); S11 Dynamic Ranges: 50Db (1.5Ghz), 40Db (3Ghz).
Features
- [NanoVNA-F V2] The NanoVNA-F V2 upgraded to the latest Firmware 0.4.0, the operation page is compatible with Nanovna-F. It enables measurements of S-parameter, voltage standing wave ratio (SWR), phase map, group delay, Smith chart, DELAY, POLAR, LINEAR and more
- [NanoVNA-F V2] Frequency Range - The measurement range of nanovna-f v2 expanded to 50KHz-3GHz. The TX/RX method can measure the complete S11 and S21 parameters, S21 dynamic ranges: 70dB (1.5GHz), 60dB (3GHz); S11 dynamic ranges: 50dB (1.5GHz), 40dB (3GHz)
- [NanoVNA-F V2] 4.3'' Screen & 5000mAh Battery - The nanovna has a 4.3-inch IPS TFT LCD screen with a resolution of 800*480 and a resistive touch screen, providing a large viewing angle. It is equipped with an 5000mAh lithium battery for longer standby time, up to 7 hours of usage. With the use of a 2A large-current charging IC, the charging time is reduced. As an add-on, it built-in 5V output for charging Android phones or tablets
- [RF Demo Kit] This a NanoVNA RF test board independently designed by BH5HNU, with a size of 10 * 10CM. The VNA test board demo calibration board for learning nanaovna Vector Network Analyzer, Antenna Analyzer test calibration learning.
- [RF Demo Kit] has 18 functional modules- the board is totally integrated with 18 functional modules. Can be used to measure 30MHz short wave low-pass-filter LPF, 100MHz FM high-pass filter HPF, 433MHz commonly used SAW band pass filter BPF, 6.5MHz ceramic trap BSFtt
- See more on Amazon...
Brand: AURSINC
See On Amazon
Looking For Something Else?
Search