JT-HLM Marine 316 Stainless Steel Boat Steering Wheel 3/4 inch Maneuvering Knob Control Spinning Knob
Asin: B0B44VFWZN
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✔Widely Used：The Boat Steering Wheel Knob Is Made Of Machined And Polished 316 Stainless Steel,You Can Use It On Boat Everything With A Steering Wheel..
✔Suitable For Size：Length: 3"（78Mm）, Width: 1.73"（43Mm).Fits Most Steering Wheels With Rim Diameter From 5/8" To 1"..
✔Designed Features ：Fits Most Steering Wheels With Rim Diameter From 5/8" To 1",This Device Gives You Full Control Of The Wheel At All Times. Whether Cruising, Trolling Or Running The Wheel Is Always In Complete Control With Only One Hand..
Features
- HIGH QUALITY MATERIAL Made of 316 Stainless Steel ,marine grade fine workmanship, provides maximum corrosion resistance, sturdy durable , so it extends the service life for a long time.
- DESIGNED FEATURES Fits most steering wheels with rim diameter from 5/8 to 1,This device gives you full control of the wheel at all times. Whether cruising, trolling or running the wheel is always in complete control with only one hand.
- WIDELY USED The Boat Steering Wheel Knob is made of machined and polished 316 Stainless steel,you can use it on boat everything with a steering wheel.
- SUITABLE FOR SIZE Length: 3 78mm , Width: 1.73 43mm).Fits most steering wheels with rim diameter from 5/8 to 1.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon Similar To JTHLM Marine 316 Stainless Steel
#1
Type 316 Stainless Steel Phillips Drive Flat Head Sheet Metal Screw Kit - Marine Bolt Supply 6-111906
Asin: B01N4LPCAA | Model: 6-111906 | PartNumber: 6-111906 | Ean: 8908515178592
Includes Only Top Grade, Type 316 Stainless Steel Flat Head Sheet Metal Screws.
Professional & Dependable Top Quality Type 316 Stainless Steel Phillips Flat Head Sheet Metal Screw Assortment Kit.
Features
- Superior Resistance to Rust & Corrosion When Compared to Common Stainless Kits
- Professional & Dependable Top Quality Type 316 Stainless Steel Phillips Flat Head Sheet Metal Screw Assortment Kit
- Includes Only Top Grade, Type 316 Stainless Steel Flat Head Sheet Metal Screws
- See more on Amazon...
Brand: Marine Bolt Supply | Manufacturer: CMC Industrial Supply
Dimensions: 1.50 x 7.00 x 4.25 inches
See On Amazon #2
Type 316 Stainless Steel Phillips Drive Oval Head Sheet Metal Screw Kit - Marine Bolt Supply 6-111915
Asin: B071RNG178 | Model: 6-111915 | PartNumber: 6-111915 | Ean: 8908515179186
Includes Only Top Grade, Type 316 Stainless Steel Oval Head Sheet Metal Screws.
Most Common Sizes Included! (#6, #8 & #10) 12 Different Sizes / 265 Superior Type 316 Oval Screws.
Features
- Superior Resistance to Rust & Corrosion When Compared to Common Stainless Kits
- Most Common Sizes Included! (#6, #8 & #10) 12 Different Sizes / 265 Superior Type 316 Oval Screws
- Includes Only Top Grade, Type 316 Stainless Steel Oval Head Sheet Metal Screws
- See more on Amazon...
Brand: Marine Bolt Supply | Manufacturer: CMC Industrial Supply
Dimensions: 1.50 x 7.00 x 4.25 inches | Weight: 1.00 Pounds
See On Amazon #3
Type 316 Stainless Steel Phillips Flat Machine Screw Kit Marine Bolt Supply 6-111317
Asin: B08287DYJ7 | Model: 6-111317 | PartNumber: 6-111317 | Ean: 8908515180526
Professional & Dependable Top Quality Type 316 Stainless Steel Machine Screw Assortment Kit.
Includes Only Top Grade, Type 316 Stainless Steel Machine Screws.
Includes The 12 Most Popular/Common Sizes! All Fully Threaded.
Features
- Superior Resistance to Rust & Corrosion When Compared to Common Stainless Kits
- Includes The 12 Most Popular/Common Sizes! All Fully Threaded
- Professional & Dependable Top Quality Type 316 Stainless Steel Machine Screw Assortment Kit
- Includes Only Top Grade, Type 316 Stainless Steel Machine Screws
- See more on Amazon...
Brand: Marine Bolt Supply | Manufacturer: CMC Industrial Supply
Dimensions: 1.50 x 7.00 x 4.25 inches
See On Amazon #4
JT-HLM 90 Degree 5/8'' Nylon Thru Hull Connector,Black Deck Drain with Stainless Steel Trim Cover, Hose Pipe Elbow Bilge Pump Drain Thru Hull Fitting
Asin: B0C16WSK5F
✔Widely Applications:Boats Yachts Caravans Trucks Autocaravans Tractor And Many More ... Kitchen Or Grill Area..
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Suitable For Size：Hose 5/8 Inch(15Mm).（See The Picture For The Specific Size）.
✔Easy Installation:Easy And Quick For Installation, Designed For Easier Applications Where Hose Is Difficult To Route.(Not Recommended For Use Below The Waterline).
Features
- HIGH QUALITY MATERIAL:Made of durable polypropylene to withstand the rigors of marine environments,highly mirror polished 316 Stainless-steel flange offers excellent corrosion resistance,Ideal for use as an exhaust port for a bilge pump.
- EASY INSTALLATION:Easy and quick for installation, designed for easier applications where hose is difficult to route.(Not recommended for use below the waterline)
- WIDELY APPLICATIONS:Boats Yachts Caravans trucks Autocaravans Tractor And many more ... kitchen or grill area.
- SUITABLE FOR SIZE Hose 5/8 inch(15mm). See the picture for the specific size
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Yeat
See On Amazon #5
JT-HLM Boat Stainless Steel 2" T-Handle Lock Floor Buckle Marine Non-Locking Mount Hatch Latch Flush Turning Lift
Asin: B09WTTXR9S
▲Size:Boat Hatch Latch Outside Diameter 2.4" (60Mm) ;Hole Diameter 53Mm;The Length Of Bolt Is 1.28" (30Mm)(Refer To The Size Chart For Specific Dimensions).
▲Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
▲Widely Used :You Can Use It In Various Environments . The Handle Lock Can Be Installed Anywhere..
▲ Design Feature:Marine Cam Latch Supplied With Fasteners For Set Up Easily..
Features
- HIGH QUALITY MATERIAL:Boat cam latch made of 316 stainless steel which's locking style supplied with two screws.
- DESIGN FEATURE:Marine cam latch supplied with fasteners for set up easily.
- Size:Boat hatch latch Outside Diameter 2.4 (60mm) ;Hole diameter 53mm;The length of bolt is 1.28 (30mm)(Refer to the size chart for specific dimensions)
- WIDELY USED :You can use it in various environments . The handle lock can be installed anywhere.
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #6
JT-HLM 2 PCS Marine Grade Boat Door Hatch Anti-Rattle Latches 316 Stainless Steel Lockable Hold Down Clamp Latches
Asin: B0C149P78R
✔Suitable For Size:Anti-Rattle Latch Width:1-1/8" (28 Mm) ; Length: 3.6 Inch / 90 Mm (When Latch Is In The Closed Position)The Detail Size Refer To The Left Picture..
✔Anti-Rattle Design: Eliminates Noise And Vibration During Use, Ensuring A Quiet And Comfortable Environment. The Latch Features A Center Tensioning Cam And An Eyelet For A Padlock, Providing A Secure Locking Mechanism To Keep Your Belongings Safe And Secure..
✔Widely Used:Boat Lockable Hold Down Clamp Latch Used For Marine,Boat,Hatch Cover,Door,Yacht,Locker,Etc..
✔Easy To Install:Simple Installation, No Drilling Or Welding Required. Direct Replacement For The Old Or Broken One..
Features
- HIGH QUALITY MATERIAL:Marine grade 316 stainless steel: Latches are made of marine-grade 316 stainless steel, corrosion-resistant, rust-resistant, heavy-duty, sturdy, and durable.
- EASY TO INSTALL:Simple installation, no drilling or welding required. Direct replacement for the old or broken one.
- SUITABLE FOR SIZE:Anti-rattle latch width:1-1/8 (28 mm) ; Length: 3.6 inch / 90 mm (When latch is in the closed position)the detail size refer to the left picture.
- WIDELY USED:Boat lockable hold down clamp latch used for marine,boat,hatch cover,door,yacht,locker,etc.
- ANTI-RATTLE DESIGN: Eliminates noise and vibration during use, ensuring a quiet and comfortable environment. The latch features a center tensioning cam and an eyelet for a padlock, providing a secure locking mechanism to keep your belongings safe and secure.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #7
JT-HLM 6 inch Boat Hatch 316 Stainless Steel Round Non Slip 2 Eyes Inspection Hatch Deck Plate with Detachable Cover
Asin: B0C13F6R4T
▲Good Waterproof:6 Inch Inside Diameter Port Hole With The O-Ring Seal Around Cover Keeps Water Out(Need To Install With 5Mm Screws)..
▲Risk-Free Purchase! If You Have Any Issues ,Please Feel Free To Contact Us..
▲Size:Inner Dia.=6"; Cut-Out Size: 160Mm/6.9"; Diameter Of Inner Plate: 150Mm / 6"; Diameter Of Outer Ring: 200Mm / 8"（Dimensions Can Refer To The Left Figure）.
▲Easy To Install:Simple Installation, No Drilling Or Welding Required. Direct Replacement For The Old Or Broken One..
Features
- HIGH QUALITY MATERIAL:Made of 316 stainless steel, this deck plate wil retain an attractive, clean finish with low maintenance for the discriminating yachtsman, outside of a long service life.Heavy duty lid with non-slip, mirrow polished surface.
- EASY TO INSTALL:Simple installation, no drilling or welding required. Direct replacement for the old or broken one.
- GOOD WATERPROOF:6 Inch inside diameter port hole with the O-ring seal around cover keeps water out(Need to install with 5mm screws).
- SIZE:Inner Dia.=6; Cut-out size: 160mm/6.9; Diameter of inner plate: 150mm / 6; Diameter of outer ring: 200mm / 8 Dimensions can refer to the left figure
- RISK-FREE purchase! If you have any issues ,please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #8
Type 316 Stainless Steel Phillips Truss Sheet Metal Screw Kit Marine Bolt Supply 6-111920
Asin: B06XYS3XCL | Model: 6-111920 | PartNumber: 6-111920 | Ean: 8908515179100
Includes Only Top Grade, Type 316 Stainless Steel Truss Head Sheet Metal Screws.
Professional & Dependable Top Quality Type 316 Stainless Steel Sheet Metal Screw Assortment Kit.
Features
- Superior Resistance to Rust & Corrosion When Compared to Common Stainless Kits
- Professional & Dependable Top Quality Type 316 Stainless Steel Sheet Metal Screw Assortment Kit
- Includes Only Top Grade, Type 316 Stainless Steel Truss Head Sheet Metal Screws
- See more on Amazon...
Brand: Marine Bolt Supply | Manufacturer: CMC Industrial Supply
Dimensions: 1.50 x 7.00 x 4.25 inches
See On Amazon #9
JT-HLM Heavy Dudy Marine Grade 316 Steel Stainless 2 Way Boat Hand Rail Fitting 90 Degree Elbow for 1" O.D. Tube Marine Hardware
Asin: B09WMCZ52Y
✔Easy To Install:Boat Rod Rail Tube Is Lightweight, Easy To Install And Carry, Which Can Better Meet Your Needs..
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Suitable For:90 Degree Elbow Suitable For 1" O.D. Tube, The Inner Diameter Is 1Inch(26Mm), The Outer Diameter Is 1.2Inch(31Mm), And The Pipe Wall Thickness Is 0.1Inch(2Mm), Overall Length Is 1.9Inch(49Mm)..
✔Durable:Maximum Corrosion Resistance And Durability In The Saltwater Environment,Polished Beautifully, Mirror-Like Finished..
Features
- HIGH QUALITY: Precision cast 316 marine grade stainless steel,precision casting, strong and durable.
- DURABLE:Maximum corrosion resistance and durability in the saltwater environment,polished beautifully, mirror-like finished.
- EASY TO INSTALL:Boat rod rail tube is lightweight, easy to install and carry, which can better meet your needs.
- SUITABLE FOR:90 Degree elbow suitable for 1 O.D. Tube, the inner diameter is 1Inch(26mm), the outer diameter is 1.2Inch(31mm), and the pipe wall thickness is 0.1Inch(2mm), overall length is 1.9Inch(49mm).
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #10
JT-HLM 2pcs Boat Gas Cap Key, 316 Stainless Steel Marine Bayliner Boat Cap Gas Replacement Key for Fuel Water Tank
Asin: B09WTYDLSV
✔Size:The Boat Gas Cap Key Is 1.7Inch(44Millimetres) X 0.78Inch(20Millimetres), Standard Part.You Will Receive 2 Pcs Deck Fill Plate Key..
✔Easy To Use And Carry:Can Be Hung In The Key Chain, It’S Simple And Convenient To Use Deck Filler Key, Just Replace Your Old Or Broken Gas Cap Key For Boat Directly.
✔Widely Used:Suitable For Most Boat, Yacht, Modern Watercraft And Boat Fuel Deck Fuel Port, Use Marine Fuel Filler Caps To Open And Close Your Fuel And Water Tanks Caps On Boat..
✔Design Feature:Simple And Convenient To Use, Universally Suitable For Most Yacht, Boat, Etc..
Features
- HIGH QUALITY MATERIAL:The deck fill plate key are constructed of heavy duty 316 stainless steel with polished surface for sturdy, durable, anti-rust, anti-corrosion and resistance to wear.
- DESIGN FEATURE:Simple and convenient to use, universally suitable for most yacht, boat, etc.
- SIZE:The boat gas cap key is 1.7inch(44millimetres) x 0.78inch(20millimetres), standard part.You will receive 2 Pcs Deck Fill Plate Key.
- WIDELY USED:Suitable for most boat, yacht, modern watercraft and boat fuel deck fuel port, use marine fuel filler caps to open and close your fuel and water tanks caps on boat.
- EASY TO USE AND CARRY:Can be hung in the key chain, it s simple and convenient to use deck filler key, just replace your old or broken gas cap key for boat directly
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #11
JT-HLM Marine 316 Stainless Steel 30 Degree Round Base for Boat 7/8'' Hand Railing Fittings Hardware
Asin: B09WTMF5YY
▲Size:The Diameter Of The Tube Seat Is 2.55" (65Mm); The Inner Diameter Of The Tube Is 7/8" (22Mm), The Outer Diameter Is 1.1"(28Mm); The Diameter Of The Screw Is 5Mm..
▲Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
▲Widely Used :For Your Bimini Top Or Handrail Installation Of Your Boat, Yacht, Or Kayak..
▲ Design Feature:The Surface Of The 30 Degree Round Base Has Been Well Polished, Which Has A Mirror Like Appearance..
Features
- HIGH QUALITY MATERIAL:Marine hatch lock is made of stainless steel 316 ,maximum corrosion resistance and durability in the saltwater environment.
- DESIGN FEATURE:The surface of the 30 degree round base has been well polished, which has a mirror like appearance.
- Size:The diameter of the tube seat is 2.55 (65mm); The inner diameter of the tube is 7/8 (22mm), the outer diameter is 1.1(28mm); The diameter of the screw is 5mm.
- WIDELY USED :For your bimini top or handrail installation of your boat, yacht, or kayak.
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #12
JT-HLM Boat 360 Degree Rod Holder Drop-in Swivel Insert/Adapter,316 Stainless Steel Marine Fishing Pole Converter Pack of 2
Asin: B0C1BQ41KK | Model: ZHQ-0002 | PartNumber: ZHQ-0002
✔Size:Height: 2.25 Inch (57 Mm); Od: 1-1/2 Inch (38 Mm). It Will Fit A Rod Holder Butt With 1-9/16 Inches (39.6 Mm) Or Smaller Outside Diameter. It May Be Used With Either 30 Degrees, 60 Degrees, Or 90-Degree Rod Holder.(Refer To The Size Chart For Specific Dimensions).
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Easy Installation:Drop-In Swivel Is Easy To Install, No Complicated Operation Is Required, And The Rotary Joint Can Instantly Convert Any Gun Inner Rod Bracket Into A Rotary Rod Bracket..
✔Design Feature:With This Drop-In Swivel, The Tip Of The Fishing Rod Can Follow The Trajectory Of The Fish, And The Line Can Pass Freely On The Drum Without Any Friction. And Can Help Your Rod Holder Pin Depth 1-1/2 Inches, The Upward Rotating Part With Drainage Holes, Will Not Retain Water..
Features
- HIGH QUALITY MATERIAL:It is made of high-quality 316 stainless steel, strong and durable, not easy to bend and deform, and wear-resistant. Good weather resistance, sea water resistance and long service life.
- DESIGN FEATURE:With this drop-in swivel, the tip of the fishing rod can follow the trajectory of the fish, and the line can pass freely on the drum without any friction. And can help your rod holder pin depth 1-1/2 inches, the upward rotating part with drainage holes, will not retain water.
- SIZE:Height: 2.25 inch (57 mm); OD: 1-1/2 inch (38 mm). It Will fit a rod holder butt with 1-9/16 inches (39.6 mm) or smaller outside diameter. It may be used with either 30 degrees, 60 degrees, or 90-degree rod holder.(Refer to the size chart for specific dimensions)
- EASY INSTALLATION:Drop-in swivel is easy to install, no complicated operation is required, and the rotary joint can instantly convert any gun inner rod bracket into a rotary rod bracket.
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #13
JT-HLM Boat 1-1/8'' Black Trim Cover 90 Degrees Hose Pipe Elbow Bilge Pump Drain Thru Hull Fitting
Asin: B0CT57DHC7
✔Widely Applications：Boats Yachts Caravans Trucks Autocaravans Tractor And Many More ... Kitchen Or Grill Area..
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Suitable For Size：Outer Diameter Of Pipe 1-1/8Inch（See The Picture For The Specific Size）.
✔Easy Installation ：Easy And Quick For Installation, Designed For Easier Applications Where Hose Is Difficult To Route.(Not Recommended For Use Below The Waterline).
Features
- HIGH QUALITY MATERIAL Made of durable polypropylene to withstand the rigors of marine environments,highly mirror polished 316 Stainless-steel flange offers excellent corrosion resistance,Ideal for use as an exhaust port for a bilge pump.
- EASY INSTALLATION Easy and quick for installation, designed for easier applications where hose is difficult to route.(Not recommended for use below the waterline)
- WIDELY APPLICATIONS Boats Yachts Caravans trucks Autocaravans Tractor And many more ... kitchen or grill area.
- SUITABLE FOR SIZE Outer diameter of pipe 1-1/8inch See the picture for the specific size
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #14
JT-HLM 4 inch Boat Hatch 316 Stainless Steel Round Non Slip 2 Eyes Inspection Hatch Deck Plate with Detachable Cover For Marine Boat Yachts Ships
Asin: B0C13CYRKP
✔Good Waterproof:4 Inch Inside Diameter Port Hole With The O-Ring Seal Around Cover Keeps Water Out(Need To Install With 5Mm Screws)..
✔Good Erformance:Even If Exposed To The Sun For A Long Time, It Is Not Easy To Deform And Become Brittle. Excellent Resistance Makes It Durable In Rain And Sea Water Environment. High Impact Resistance Also Allows It To Be Installed In Places Exposed To Heavy Treads, Such As Ship Decks..
✔Suitable For Size:The Diameter Of Splint Plate:5.5 Inch(140Mm);Cover Diameter:4.2 Inch(107Mm);The Inside Diameter Of:4 Inch(102Mm);Outer Diameter:4.3 Inch(110Mm)..
✔Easy To Install:Simple Installation, No Drilling Or Welding Required. Direct Replacement For The Old Or Broken One.The High Grade Inspection Hatch Comes With Pre‑Drilled Countersunk Holes (Screws Not Included) For Convenient Installation..
Features
- HIGH QUALITY MATERIAL:Made of 316 stainless steel, this deck plate wil retain an attractive, clean finish with low maintenance for the discriminating yachtsman, outside of a long service life.Heavy duty lid with non-slip, mirrow polished surface.
- EASY TO INSTALL:Simple installation, no drilling or welding required. Direct replacement for the old or broken one.The high grade inspection hatch comes with pre drilled countersunk holes (screws not included) for convenient installation.
- GOOD WATERPROOF:4 Inch inside diameter port hole with the O-ring seal around cover keeps water out(Need to install with 5mm screws).
- SUITABLE FOR SIZE:The diameter of splint plate:5.5 inch(140mm);Cover diameter:4.2 inch(107mm);The inside diameter of:4 inch(102mm);Outer diameter:4.3 inch(110mm).
- GOOD ERFORMANCE:Even if exposed to the sun for a long time, it is not easy to deform and become brittle. Excellent resistance makes it durable in rain and sea water environment. High impact resistance also allows it to be installed in places exposed to heavy treads, such as ship decks.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #15
JT-HLM 90 Degree 1-1/2'' Nylon Thru Hull Connector,Black Deck Drain with Stainless Steel Trim Cover, Hose Pipe Elbow Bilge Pump Drain Thru Hull Fitting
Asin: B0CDBVC4XH
✔Widely Applications：Boats Yachts Caravans Trucks Autocaravans Tractor And Many More ... Kitchen Or Grill Area..
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Suitable For Size：Outer Diameter Of Pipe 1-1/2Inch(38.1Mm).（See The Picture For The Specific Size）.
✔Easy Installation ：Easy And Quick For Installation, Designed For Easier Applications Where Hose Is Difficult To Route.(Not Recommended For Use Below The Waterline).
Features
- HIGH QUALITY MATERIAL Made of durable polypropylene to withstand the rigors of marine environments,highly mirror polished 316 Stainless-steel flange offers excellent corrosion resistance,Ideal for use as an exhaust port for a bilge pump.
- EASY INSTALLATION Easy and quick for installation, designed for easier applications where hose is difficult to route.(Not recommended for use below the waterline)
- WIDELY APPLICATIONS Boats Yachts Caravans trucks Autocaravans Tractor And many more ... kitchen or grill area.
- SUITABLE FOR SIZE Outer diameter of pipe 1-1/2inch(38.1mm). See the picture for the specific size
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #16
JT-HLM 5 inch Boat Hatch 316 Stainless Steel Round Non Slip 2 Eyes Inspection Hatch Deck Plate with Detachable Cover w/Fasteners For Marine Boat Yachts Ships
Asin: B0B428X4SF
✔Good Waterproof:4 Inch Inside Diameter Port Hole With The O-Ring Seal Around Cover Keeps Water Out(Need To Install With 5Mm Screws)..
✔Good Erformance:Even If Exposed To The Sun For A Long Time, It Is Not Easy To Deform And Become Brittle. Excellent Resistance Makes It Durable In Rain And Sea Water Environment. High Impact Resistance Also Allows It To Be Installed In Places Exposed To Heavy Treads, Such As Ship Decks..
✔Suitable For Size:The Diameter Of Splint Plate:6.89 Inch(175Mm);Cover Diameter:5.24 Inch(133Mm);The Inside Diameter Of:5 Inch(127Mm);Outer Diameter:135 Inch(5.31Mm)..
✔Easy To Install:Simple Installation, No Drilling Or Welding Required. Direct Replacement For The Old Or Broken One.The High Grade Inspection Hatch Comes With Pre‑Drilled Countersunk Holes (Screws Not Included) For Convenient Installation..
Features
- HIGH QUALITY MATERIAL:Made of 316 stainless steel, this deck plate wil retain an attractive, clean finish with low maintenance for the discriminating yachtsman, outside of a long service life.Heavy duty lid with non-slip, mirrow polished surface.
- EASY TO INSTALL:Simple installation, no drilling or welding required. Direct replacement for the old or broken one.The high grade inspection hatch comes with pre drilled countersunk holes (screws not included) for convenient installation.
- GOOD WATERPROOF:4 Inch inside diameter port hole with the O-ring seal around cover keeps water out(Need to install with 5mm screws).
- SUITABLE FOR SIZE:The diameter of splint plate:6.89 inch(175mm);Cover diameter:5.24 inch(133mm);The inside diameter of:5 inch(127mm);Outer diameter:135 inch(5.31mm).
- GOOD ERFORMANCE:Even if exposed to the sun for a long time, it is not easy to deform and become brittle. Excellent resistance makes it durable in rain and sea water environment. High impact resistance also allows it to be installed in places exposed to heavy treads, such as ship decks.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #17
JT-HLM 2 Pcs Boat Bimini Top Deck Swivel Hinge Side Mount 316 Stainless Steel 180 Deck hinge with Screws and Rubber Pad
Asin: B0BCF5FQPT
✔Hinge Size: Overall Length 2-3/4"（70Mm) ,Overall Width 1" (25Mm), Overall Height 46Mm,Distance Between Two Holes 2" (50Mm) (Refer To The Size Chart For Specific Dimensions).
✔Unique Design:Boat Top Hinges Bimini Mounts Use With Any Bimini Top Cap Fitting.These Deck Hinge Were Exactly What We Needed To Mount Our Binimi Top With Since They Perfectly Swivel For Any Surface,This Gave Stainless Steel Deck Hinge The Flexibility It Needed So As To Not Snap The Plastic Tabs On The End Of The Bimini Tubes..
✔Widely Used :You Can Deck Hinge To Be Mounted On Almost Any Angle. Mounting For On Ship Yachts, Fiberglass Boats, Inflatable Boats, Yachts And Other Boats And Awnings..
✔Design Feature:Sturdy Pivoting Deck Hinge Allows 180 Degrees Of Swivel In The Hinge And Allows Horizontal Or Vertical Mount.Direct Replacement For The Old Or Broken..
Features
- HIGH QUALITY MATERIAL:Boat 180 Deck hinge made of marine grade 316 stainless steel,durable,highly polished and with rubber pad and mount screws.
- DESIGN FEATURE:Sturdy pivoting deck hinge allows 180 degrees of swivel in the hinge and allows horizontal or Vertical mount.Direct replacement for the old or broken.
- Hinge Size: Overall Length 2-3/4 70mm) ,Overall Width 1 (25mm), Overall Height 46mm,Distance between two holes 2 (50mm) (Refer to the size chart for specific dimensions)
- WIDELY USED :You can deck hinge to be mounted on almost any angle. Mounting for on ship yachts, fiberglass boats, inflatable boats, yachts and other boats and awnings.
- UNIQUE DESIGN:Boat top hinges bimini mounts use with any bimini top cap fitting.these deck hinge were exactly what we needed to mount our binimi top with since they perfectly swivel for any surface,This gave stainless steel deck hinge the flexibility it needed so as to not snap the plastic tabs on the end of the bimini tubes.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #18
JT-HLM Oval Garboard Drain Plug Marine Stainless Steel Drain Plug for 1" Hole 3/4" Thread, with Waterproof O Seal Ring and Screws
Asin: B09WY496LR
✔Size:Heavy Duty 316 Stainless Steel Drain Plug For 1" Hole,Thread Od 3/4 Inch.Back Mount Depth Is About 0.55" (14Mm). The Surface Length Of The Oval Garboard Drain Plug Kit Is 2" (50Mm), Width: 1-1/2" (38Mm);.
✔Widely Used:Threads And O-Ring Ensure A Water Tight Fit,Maintain Sealing Under Vibration Conditions,Suitable For Boat Transoms,Fish Wells,Ice Chests,Etc..
✔Easy To Drain:Oval Garboard Drain Plug Kit Makes Boat Getting On Or Off The Water Quicker, Because It Saves A Lot Of Time To Open And Store.With A Watertight Sealing Ring, Leakage And Vibration-Induced Loosening Are Completely Prevented.
✔ Design Feature:This Oval Garboard Drain Plug Kit Has A Special Design That Is Two-Layer Threads, It Will Retain The Boat Plug By The Second Layer Threads When Draining.Simple And Convenient To Use, Turn And Lift The Plug; The Plug Is Fixed To The Base, So You Will Never Misplace The Boat Plug Again,Provide Bilge Drainage When Towing..
Features
- HIGH QUALITY MATERIAL:Marine drain plug is made of 316 stainless steel,easy installation,retention system keeps plug from getting lost.
- DESIGN FEATURE:This oval garboard drain plug kit has a special design that is two-layer threads, it will retain the boat plug by the second layer threads when draining.Simple and convenient to use, turn and lift the plug; the plug is fixed to the base, so you will never misplace the boat plug again,provide bilge drainage when towing.
- Size:Heavy duty 316 stainless steel drain plug for 1 hole,thread OD 3/4 inch.Back mount depth is about 0.55 (14mm). The surface length of the oval garboard drain plug kit is 2 (50mm), width: 1-1/2 (38mm);
- EASY TO DRAIN:Oval garboard drain plug kit makes boat getting On or Off the water quicker, because it saves a lot of time to open and store.With a watertight sealing ring, leakage and vibration-induced loosening are completely prevented
- WIDELY USED:Threads and o-ring ensure a water tight fit,maintain sealing under vibration conditions,suitable for boat transoms,fish wells,ice chests,etc.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #19
JT-HLM 2 Pcs Quick Release Bimini Top Swivel Deck Hinge,360 Degrees 316 Stainless Steel with Screws and Rubber Gasket
Asin: B0BCDCBN4D
✔Boat Deck Hinge Size: Approx. 3.2" (L)X1.2" (W) /82Mm*32Mm;The Height: 33Mm;Mounting Hole To Mounting Hole: 2.5”(63.5Mm).(Refer To The Size Chart For Specific Dimensions).
✔Gaskets Can Make There Is No Gap Between Quick Release Deck Hinge Base And The Deck, Providing A Better Fit; At The Same Time, The Hinge Snaps Will Not Damage The Deck..
✔Widely Used :You Can Use It In Various Environments . Rubber Gaskets Can Make There Is No Gap Between Quick Release Deck Hinge Base And The Deck, Providing A Better Fit; At The Same Time, The Hinge Snaps Will Not Damage The Deck..
✔Design Feature:360° Deck Hinge Easily Remove Or Install Top Without Having To Keep Track Of Screws And Pins,The Hinge Snaps Into Base And Stays Attached To Bimini When Separated..
Features
- HIGH QUALITY MATERIAL:Bimini top quick swivel release deck hinge made of stainless steel material , maximum corrosion resistance and durability in the saltwater environment.
- DESIGN FEATURE:360 Deck hinge easily remove or install top without having to keep track of screws and pins,The hinge snaps into base and stays attached to bimini when separated.
- Boat Deck Hinge Size: approx. 3.2 (L)x1.2 (W) /82mm*32mm;The height: 33mm;Mounting hole to mounting hole: 2.5 (63.5mm).(Refer to the size chart for specific dimensions)
- WIDELY USED :You can use it in various environments . Rubber gaskets can make there is no gap between Quick Release Deck Hinge base and the deck, providing a better fit; at the same time, the hinge snaps will not damage the deck.
- Gaskets can make there is no gap between Quick Release Deck Hinge base and the deck, providing a better fit; at the same time, the hinge snaps will not damage the deck.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon
Looking For Something Else?
Search