Features

• Operating Skills: 1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding. 2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.
• Tying Wire Installations: 1. In the state of start-up, press the locking plate of the opening wire plate, open the plate cover.2. Take out the tying wire, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube.3. Insert the head of the wire guide into the tap pipe.4. Cover the plate and fasten the locking piece.5. Pinch the wire forward with two fingers, press and hold the switch and send the wire out.
• Operation Instructions: 1. The rebar tirer's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles. 2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off)3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding. 4. When the binding process is not completed, do not unplug the machine in advance.
• Package included: 1X Tying Machine 1X Pliers 1X Charger (we will send you the suitable adapter according to your location) 1X Storage Box 2X Lithium Ion Batteries 2X Tying Wire (Tying Wire Standard: About 0.8 mm x 110 m/roll)
• 24-hour online service: We are committed to providing customers with satisfactory products and services. Please buy with confidence. If you have any questions, you can contact us at any time. We will provide you with considerate service online 24 hours a day.
• See more on Amazon...