QWORK Welding Chipping Hammer, 2 Packs 10.5" Two-head Hammer with Coil Spring Handle Welding Cleansing and Crushed Ice
Asin: B0B6ZTH7W8 | Model: WD8346 | PartNumber: WD8346 | Ean: 0795973807670 | UPC: 795973807670
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.High Quality: High-Carbon Steel Forging, With Toughness And High Hardness, Not Easy To Wear, Durable And Not Easy To Burn-In..
100% Satisfied Service: Enjoy A Smooth & Frustration Free Experience With Our 100% Satisfied Service In One Month!.
Note: Wear Protective Gloves And Goggles Before Using The Device, Keep Away From Children..
Coil Spring Handle: The Spring Handles Are Designed To Absorb Vibration. Percussion Buffering Does Not Hurt Hands. The Hammer End Design Of The Hanging Hole, Easy To Hang On The Nail Board Or Nail, So That Its Storage And Use More Convenient And Effective..
Features
- Welding Chipping Hammer: The Welding chipping hammer features a tapered tip and a double bevel at the end, which is suitable for welders, and can be used on building sites, car maintenance, as well as breaking ice and knocking brick slag. It can also be used as a life hammer.Efficient, convenient and labor-saving.
- Coil Spring Handle: The spring handles are designed to absorb vibration. Percussion buffering does not hurt hands. The hammer end design of the hanging hole, easy to hang on the nail board or nail, so that its storage and use more convenient and effective.
- High Quality: High-carbon steel forging, with toughness and high hardness, not easy to wear, durable and not easy to burn-in.
- Note: Wear protective gloves and goggles before using the device, keep away from children.
- 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month!
- See more on Amazon...
Brand: QWORK | Manufacturer: QWORK
See On Amazon Similar To QWORK Welding Chipping Hammer 2
#1
VASTOOLS Welding Chipping Hammer with Coil Spring Handle,10.5",Cone and Vertical Chisel/ 10" Wire Brush(Free), Black
Asin: B07CH6QNCV | Model: CVCH-B | PartNumber: CVCH-B | Ean: 0608410517196 | UPC: 608410517196
Tempered Chisel On One End And Point On The Other.1-1/16" Width Chisel To Remove Welding Slag Faster..
Welding Chipping Hammer And Steel Wire Brush, Makes It Easy To Clean And Remove Slag From All Your Welds..
Shoe Handle Wire Scratch Brush, 0.012" Fill Diameter, 5-1/4" Brush Length, 1-1/16" Brush Width, 10" Overall Length..
Spring Handle Designed To Absorb The Shock Of Contact While Cleaning And Shipping Way Welding Debris..
Features
- High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length.
- Spring handle designed to absorb the shock of contact while cleaning and shipping way welding debris.
- Tempered chisel on one end and point on the other.1-1/16 width chisel to remove welding slag faster.
- Shoe handle wire scratch brush, 0.012 fill diameter, 5-1/4 brush length, 1-1/16 brush width, 10 overall length.
- Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds.
- See more on Amazon...
Brand: VASTOOLS | Manufacturer: BYHH
Dimensions: 1.50 x 10.50 x 6.10 inches | Weight: 1.30 Pounds
See On Amazon #2
ESTWING BIG BLUE Welding/Chipping Hammer - 14 oz Slag Removal Tool with Forged Steel Construction & Shock Reduction Grip - E3-WC
Asin: B00047EZSC | Model: E3-WC | PartNumber: E3-WC
Ean: 0640024942865, 7535001611267, 7566908057704, 0709730202554, 0723434817005, 0788809599863, 0640024942988, 0799360663238, 7535001534658, 8850292507655, 0809393889663, 0717261792758, 0034139621812, 0714637831639, 0787721225904, 7241871224499, 0799360185662, 0013440006853, 0636123637368, 0639738669113, 0716080034988, 0743153713150, 0743153712245, 5272003704802, 7241870716117, 0034139627210
UPC: 743153713150, 640024942865, 743153712245, 788809599863, 639738669113, 799360185662, 013440006853, 723434817005, 787721225904, 636123637368, 799360663238, 716080034988, 034139621812, 709730202554, 714637831639, 717261792758
Built For The Pro – Machinists, Metalworkers, Blacksmiths, Fabricators, Mechanics, Tradesman & Serious Diyers.
Made In The Usa – Our Tools Are Proudly Crafted In Rockford, Il Using The Finest American Steel.
Patented Shock Reduction Grip – Comfortable, Durable & Reduces Impact Vibration By 70%.
Versatility On The Job – Perfect For Cleaning And Removing Slag From All Welds.
Features
- FORGED IN ONE PIECE The most durable, longest lasting striking tools available
- VERSATILITY ON THE JOB Perfect for cleaning and removing slag from all welds
- BUILT FOR THE PRO machinists, metalworkers, blacksmiths, fabricators, mechanics, tradesman & serious DIYers
- PATENTED SHOCK REDUCTION GRIP Comfortable, durable & reduces impact vibration by 70%
- MADE IN THE USA Our tools are proudly crafted in Rockford, IL using the finest American steel
- See more on Amazon...
Brand: Estwing | Manufacturer: Estwing
Dimensions: 7.50 x 11.00 x 1.00 inches | Weight: 0.86 Pounds
Warranty: Limited warranty. See owner's manual for more details.
See On Amazon #3
ESTWING Sure Strike Drilling/Crack Hammer - 2-Pound Sledge with Fiberglass Handle & No-Slip Cushion Grip - MRF2LB, Blue/Yellow
Asin: B00433SC3C | Model: MRF2LB | PartNumber: MRF2LB | Ean: 0370377788871, 0077348239478, 0702872569783, 0809393889748, 0034139926702, 0809199911223 | UPC: 077348239478, 370377788871, 809393889748, 809199911223, 034139926702, 702872569783
Non-Slip Fiberglass Handle - This Mini-Sledge Features A Lightweight Yet Extremely Durable Fiberglass Handle. The Non-Slip Cushion Grip Provides Added Traction And Comfort For The Toughest Jobs.
The Finest Striking Tools Since 1923- With Durability, Functionality And Longevity At Its Core, Estwing Has Been And Engineering The World's Most Trusted Striking Tools Since For Nearly 100 Years.
Versatility On The Job - The Mrf2lb Drilling Hammer Is Ideal For Everything From Driving Stakes And Light Demolition To Use With Wood Chisels, Punches, Star Drills, Hardened Nails & More.
The Right Size For The Job - This 24Oz Striking Tool Provides The Right Balance Of Weight And Size. The 2Lb Head Is Easily Managed And Compact Handle Allows For Precision Without Sacrificing Power.
Features
- FORGED STEEL HEAD Estwing's MRF2LB sledge is the favorite of pros & DIYers alike. Featuring a fully forged 2 pound head, it is engineered for maximum strength, durability and a lifetime of hard work
- THE RIGHT SIZE FOR THE JOB - This 24oz striking tool provides the right balance of weight and size. The 2lb head is easily managed and compact handle allows for precision without sacrificing power
- NON-SLIP FIBERGLASS HANDLE - This mini-sledge features a lightweight yet extremely durable fiberglass handle. The non-slip cushion grip provides added traction and comfort for the toughest jobs
- VERSATILITY ON THE JOB - The MRF2LB drilling hammer is ideal for everything from driving stakes and light demolition to use with wood chisels, punches, star drills, hardened nails & more
- THE FINEST STRIKING TOOLS SINCE 1923- With durability, functionality and longevity at its core, Estwing has been and engineering the world's most trusted striking tools since for nearly 100 years
- See more on Amazon...
Brand: Estwing | Manufacturer: Estwing
Dimensions: 1.53 x 10.75 x 3.80 inches | Weight: 1.98 Pounds
Warranty: Estwing warrants its all steel hammers against failure in normal use, but does not warrant its tools against misuse, abuse or wearing out. Misuse could include, but are not limited to the following: a). Striking other hardened objects such as other tools, hardened nails, drills or chisels, etc. b). Pulling (attempting to withdraw) hardened nails, screws or nail sets. c). Filing of nick in claws or handles
See On Amazon #4
AMERICAN MUTT TOOLS Welding Chipping Hammer 14 oz Welding Hammer Chipping Slag Slag Hammer, Chipping Hammer Welding, Welder Hammer, Welding Chipping Hammer, Welders Chipping Hammer, Chipi Hammer
Asin: B0C21MN99H | Model: TH109-102 | PartNumber: TH109-102 | Ean: 0850032520300 | UPC: 850032520300
Enjoy Superior Convenience With Our Welders Chipping Hammer. The Lightweight Construction Reduces Arm Fatigue, Making It The Go-To Welding Hammer For Professionals And Beginners Alike..
With A Lifetime Warranty, Our Welding Hammer Chipping Slag Is A Worry-Free Investment. This Slag Hammer Welding Tool Is An Investment That's Built To Last..
We're Serious About Durability. Crafted With Forged Construction, Our Slag Hammer Is Designed To Last. So Whether You're A Diy Enthusiast Or A Seasoned Professional, This Welders Hammer Is Your Dependable Ally For Every Project..
Say Goodbye To Discomfort! Our Welding Chipping Hammer Boasts An Ergonomic Handle Design, Significantly Reducing Fatigue During Use. This Makes It One Of The Most User-Friendly Welding Hammers Available In The Market Today..
Features
- Power through any job with our premium slag hammer welding tool. Its prime function is to efficiently remove slag and spatter from all welds, making it the perfect partner for any chipping hammer welding project.
- Say goodbye to discomfort! Our welding chipping hammer boasts an ergonomic handle design, significantly reducing fatigue during use. This makes it one of the most user-friendly welding hammers available in the market today.
- Enjoy superior convenience with our welders chipping hammer. The lightweight construction reduces arm fatigue, making it the go-to welding hammer for professionals and beginners alike.
- We're serious about durability. Crafted with forged construction, our slag hammer is designed to last. So whether you're a DIY enthusiast or a seasoned professional, this welders hammer is your dependable ally for every project.
- With a lifetime warranty, our welding hammer chipping slag is a worry-free investment. This slag hammer welding tool is an investment that's built to last.
- See more on Amazon...
Brand: AMERICAN MUTT TOOLS | Manufacturer: American Mutt Tools
Weight: 0.88 Pounds
Warranty: Limited Lifetime Manufacturer Warranty
See On Amazon #5
Estwing - MRF4OBS Sure Strike Blacksmith's Hammer - 40 oz Metalworking Tool with Fiberglass Handle & No-Slip Cushion Grip - MRF40BS Blue
Asin: B00433SC0A | Model: MRF4OBS | PartNumber: MRF4OBS | Ean: 0034139926313, 0689711656265, 0640025642849, 0300716328567 | UPC: 640025642849, 300716328567, 689711656265, 034139926313
Built For The Pro – Blacksmiths, Metal Workers, Welders, Contractors, Tradesmen, And Serious Diyers.
Versatility On The Job – The Blacksmith’S Hammer Is Perfect For A Wide Variety Of Jobs Due To Its Two Unique Striking Surfaces.
Fiberglass Handle – Lightweight, Durable Handle Offers A Comfortable Controlled Swing.
Balance And Temper – The Most Durable, Longest Lasting Striking Tools Available.
Features
- FORGED STEEL HEAD Maximum strength and durability for a lifetime of hard work
- BALANCE AND TEMPER The most durable, longest lasting striking tools available
- BUILT FOR THE PRO Blacksmiths, metal workers, welders, contractors, tradesmen, and serious DIYers
- FIBERGLASS HANDLE Lightweight, durable handle offers a comfortable controlled swing
- VERSATILITY ON THE JOB The blacksmith s hammer is perfect for a wide variety of jobs due to its two unique striking surfaces
- See more on Amazon...
Brand: Estwing | Manufacturer: Estwing
Dimensions: 1.62 x 13.98 x 4.88 inches | Weight: 2.94 Pounds
Warranty: Estwing warrants its all steel hammers against failure in normal use, but does not warrant its tools against misuse, abuse or wearing out. Misuse could include, but are not limited to the following: a). Striking other hardened objects such as other tools, hardened nails, drills or chisels, etc. b). Pulling (attempting to withdraw) hardened nails, screws or nail sets. c). Filing of nick in claws or handles
See On Amazon #6
ENEACRO SDS-Max Demolition Jack Hammer for Concrete, Heavy Duty 11 Amp Electric Demo Chipping Hammer Aluminum Alloy Shell, Vibration Control, Includes Grease, Tool Bag and Chisels
Asin: B0CH4D9HX4 | Model: ENDH45 | PartNumber: ENDH45
💪【Thoughtful Humanized Design】With An Anti-Scald Front Housing, 0845Mb Jack Hammer Is Designed To Protect The User From Potential Burns. And The 360° Adjustable Handle Is Designed For Both Horizontal And Vertical Demolitions. The Upgraded Anti-Vibration System And Pu Soft Grip Significantly Reduce Fatigue, While The Aluminum Alloy Shell Ensures Durability And Resilience, Even If Accidentally Dropped..
💪【Practical & Wide Applications】This Endh45 Demo Hammer Is Ideal For A Variety Of Medium-Duty Tasks Including Demolition, Chipping, Trenching, Breaking Concrete, Blocks, Bricks, Tiles, Stucco, And More. Perfect For Housing Foundation Removal, Tile Removal, Mechanical Installation, Demolishing Brickwork, Interior Decoration, Concrete Slabs, Oil Chimneys, And Plumbing Tasks..
💪【What You Will Get】 Endh45 Demolition Hammer*1; Flat Chisel*1; Bull Point Chisel*1; 360°Auxiliary Handle*1； Replaceable Carbon Brush 1 Set; Lubricant Grease*1；Wrench*1; Tool Bag*1; 24 Months Defect Free Warranty And 8 Working Hours Reply Customer Support. This All-Inclusive Kit Equips You For Success, Making It A Valuable Choice For Professionals And Diy Enthusiasts Alike..
💪【High-Efficiency Design】The Sds-Max Chuck Enhances Your Work Efficiency. It's Designed For Easy Chisel Changes Without The Need For Extra Tools, Meanwhile A Thick Clamping Section Locks The Chisel Securely For A More Precise And Powerful Transfer Of Energy. Endh45 Demo Hammer Also Equipped With A Self-Lock Button For Continuous Operation, You Can Effortlessly Carry Out Long Tasks Without Having To Hold Down The Power Switch All The Time, Making This An Efficient Concrete Breaker..
💪【Say Goodbye To Bulky Machines】At Just 12.8 Lbs, This Lightweight Demolition Jack Hammer Is Easy To Control And Handle. It's Equipped With An 11Amp Industrial Motor And A Heat-Resistant Copper Wire Motor, Delivering 4100Bpm, 11.6Ft/Lbs(15.7 Joule) Of Concrete-Breaking Power. Perfect For Medium-Duty Work Projects, This Powerful Tool Is Designed To Enhance Convenience And Efficiency..
Features
- AVAILABLE MODE The ENDH45 demolition jack hammer only has hammer-only function and chisel position adjustment function.
- SAY GOODBYE TO BULKY MACHINES At just 12.8 lbs, this lightweight demolition jack hammer is easy to control and handle. It's equipped with an 11Amp industrial motor and a heat-resistant copper wire motor, delivering 4100BPM, 11.6ft/lbs(15.7 Joule) of concrete-breaking power. Perfect for medium-duty work projects, this powerful tool is designed to enhance convenience and efficiency.
- THOUGHTFUL HUMANIZED DESIGN With an anti-scald front housing, 0845MB jack hammer is designed to protect the user from potential burns. And the 360 adjustable handle is designed for both horizontal and vertical demolitions. The upgraded anti-vibration system and PU soft grip significantly reduce fatigue, while the aluminum alloy shell ensures durability and resilience, even if accidentally dropped.
- HIGH-EFFICIENCY DESIGN The SDS-MAX chuck enhances your work efficiency. It's designed for easy chisel changes without the need for extra tools, meanwhile a thick clamping section locks the chisel securely for a more precise and powerful transfer of energy. ENDH45 demo hammer also equipped with a self-lock button for continuous operation, you can effortlessly carry out long tasks without having to hold down the power switch all the time, making this an efficient concrete breaker.
- PRACTICAL & WIDE APPLICATIONS This ENDH45 demo hammer is ideal for a variety of medium-duty tasks including demolition, chipping, trenching, breaking concrete, blocks, bricks, tiles, stucco, and more. Perfect for housing foundation removal, tile removal, mechanical installation, demolishing brickwork, interior decoration, concrete slabs, oil chimneys, and plumbing tasks.
- WHAT YOU WILL GET ENDH45 demolition hammer*1; Flat Chisel*1; Bull Point Chisel*1; 360 Auxiliary handle*1 Replaceable carbon brush 1 set; Lubricant Grease*1 Wrench*1; Tool Bag*1; 24 Months Defect Free Warranty and 8 working hours reply Customer support. This all-inclusive kit equips you for success, making it a valuable choice for professionals and DIY enthusiasts alike.
- See more on Amazon...
Brand: ENEACRO | Manufacturer: ENEACRO
Dimensions: 4.60 x 17.00 x 11.50 inches
See On Amazon #7
Hobart 770066 Straight Head Chipping Hammer, Black
Asin: B002ACOXNG | Model: 770066 | PartNumber: 770066 | Ean: 0715959241809 | UPC: 715959241809
Package Weight: 1.5 Pounds.
Package Dimensions: 24.638 L X 9.144 H X 32.512 W (Centimeters).
The Spring Handle Absorbs Shock Of Contact While Cleaning And Chipping Welding Debris.
Features
- Heads have a chisel on one side and a point on the other to get into tight spots
- The spring handle absorbs shock of contact while cleaning and chipping welding debris
- Package Weight: 1.5 pounds
- Package Dimensions: 24.638 L x 9.144 H x 32.512 W (centimeters)
- See more on Amazon...
Brand: Hobart | Manufacturer: Hobart
Weight: 1.00 Pounds
See On Amazon #8
Glarks 4Pcs 10'' Welding Chipping Hammer with Coil Spring Handle and Wire Brush with a Pair Welding Gloves for Removing Slag and Welding Residue
Asin: B08NDHTYBF | Model: G1998 | PartNumber: G1998
♚ [Wire Scratch Brush]: We Use Stainless Steel Bristles To Make Wire Brushes And Increase The Wire Density, So They Are Not Only Durable But Also Have A Strong Cleaning Ability. The Brush Is 10 Inches Long, The Appropriate Size And Wooden Handle Make It Easier For Grasping..
♚ [Widely Application]: This Set Of Welding Slag Removal Tools Can Not Only Be Used For Daily Welding And Cleaning Work, The Hammer Can Also Be Used As A Life Hammer And Ice Breaking Hammer, And The Brush Can Be Used To Clean Up Rust Stains On Furniture And Metal..
♚ [Welding Gloves]: Wear-Resistant Welding Gloves Protect Your Hands At All Times. The Gloves Are Made Of Soft Leather, Resistant To Oil, Heat And Cutting. The Proper Size Also Ensures That It Will Not Easily Fall Off Your Hands..
♚ [Welding Chipping Hammer]: The Welding Chipping Hammer Is Made Of High Strength And Toughness Steel. Dual-Headed Design, One End Is A Flat Chisel And The Other End Is A Pointed Chisel, Which Is Convenient For Working In A Small Space. The Coil Spring Handle Can Reduce Vibration And Improve Comfort..
Features
- [What You Get]: This set includes a 10 inch welding chipping hammer, a wire scratch bush and a pair of welding protective gloves, 4pcs in total. With this powerful set, you can quickly remove rust and slag during welding and keep your work clean.
- [Welding Chipping Hammer]: The welding chipping hammer is made of high strength and toughness steel. Dual-headed design, one end is a flat chisel and the other end is a pointed chisel, which is convenient for working in a small space. The coil spring handle can reduce vibration and improve comfort.
- [Wire Scratch Brush]: We use stainless steel bristles to make wire brushes and increase the wire density, so they are not only durable but also have a strong cleaning ability. The brush is 10 inches long, the appropriate size and wooden handle make it easier for grasping.
- [Welding Gloves]: Wear-resistant welding gloves protect your hands at all times. The gloves are made of soft leather, resistant to oil, heat and cutting. The proper size also ensures that it will not easily fall off your hands.
- [Widely Application]: This set of welding slag removal tools can not only be used for daily welding and cleaning work, the hammer can also be used as a life hammer and ice breaking hammer, and the brush can be used to clean up rust stains on furniture and metal.
- See more on Amazon...
Brand: Glarks | Manufacturer: Glarks
See On Amazon #9
Welding/Chipping Hammer,28 oz Slag Removal Tool with Forged Steel Construction & Shock Reduction Grip,Rock Pick,Forged Brick Hammer, Geologist Rock Pick (point/Chipping)
Asin: B0C7291LWW | Model: YZX173-QZ-HAMMER | PartNumber: YZX173-QZ-HAMMER
Built For The Pro – Machinists, Metalworkers, Blacksmiths, Fabricators, Mechanics, Tradesman & Serious Diyers.
It's Designed As Slag And Chipping Hammer For Welding. Please Do Not Use This Chipping Hammer As A Chopping Axe Or Sledge Hammer..
Rubber Grip– Prevention For Slip Out From The Hand ,Comfortable, Durable & Reduces Impact Vibration By 70%.
High-Quality Slag Remover Chipping / Welding Hammer – Perfect For Cleaning And Removing Slag From All Welds.
Features
- FORGED IN ONE PIECE The most durable, longest lasting striking tools available
- High-Quality Slag Remover Chipping / Welding Hammer Perfect for cleaning and removing slag from all welds
- BUILT FOR THE PRO machinists, metalworkers, blacksmiths, fabricators, mechanics, tradesman & serious DIYers
- RUBBER GRIP prevention for slip out from the hand ,comfortable, durable & reduces impact vibration by 70%
- It's designed as Slag and Chipping hammer for welding. Please do not use this chipping hammer as a chopping Axe or Sledge Hammer.
- See more on Amazon...
Brand: glorousamc | Manufacturer: glorousamc
Dimensions: 1.00 x 13.00 x 7.90 inches | Weight: 1.75 Pounds
See On Amazon #10
Swpeet 4Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves,10 Inch Welding Chipping Hammer with Steel Coil Spring Handle for Cleaning Removing Slag
Asin: B08MFF63P8
☛ 3, 1Pcs Scratch Wire Brush ------ Made Of Stainless Steel Bristles With Wooden Handle, Sturdy And Durable, The Total Length Of The Brush Is Approx. 10 Inch/ 25.5 Cm, The Width Of Steel Wire Brush Part Is Approx 1 Inch/2.5 Cm, The Wire's Length Is Approx. 4.3 Inch/11 Cm, Come With A Wooden Handle And The Proper Size For Easier Grip, Can Bring A Comfortable Using Experience..
☛ 5, Wide Applications ------ The Scratch Wire Brush Is Very Practical And Effective To Remove Paint Stains, Rust, Corrosion And Welding From Equipment, Machinery And Other Surfaces; Welding Chipping Hammer Can Be Applied For Professional Fabricators In Daily Life..
☛ 4, 1Pcs Welding Hammers ------ High Carbon Steel Chipping Hammer For Maximum Strength,10-1/2-Inch Overall Length. Spring Handle Designed To Absorb The Shock Of Contact While Cleaning And Shipping Way Welding Debris. Tempered Chisel On One End And Point On The Other.1-1/16" Width Chisel To Remove Welding Slag Faster..
☛ 2, With A Pair Welding Gloves ------ The Gloves Are Made From 1.5Mm Thick And Soft Leather Which Is Heat Resistant, Wear-Resistant, Puncture Resistant, Cut Resistant, Oil Resistant. Reinforced Double Leather Stitching And High Strength Sewing On The Finger, Palm, Elbow & Back Of The Hand Which Is Not Easy To Fall Off..
Features
- 1, What You Get ------ In this kit, You will get 4Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 pair Welding Gloves, In total 4Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds.
- 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off.
- 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience.
- 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb the shock of contact while cleaning and shipping way welding debris. Tempered chisel on one end and point on the other.1-1/16 width chisel to remove welding slag faster.
- 5, Wide Applications ------ The scratch wire brush is very practical and effective to remove paint stains, rust, corrosion and welding from equipment, machinery and other surfaces; Welding chipping hammer can be applied for professional fabricators in daily life.
- See more on Amazon...
Brand: Swpeet | Manufacturer: Swpeet
See On Amazon #11
Klein Tools H80612 Welding Chipping Hammer, 10-Ounce Steel Head Slag Hammer with Shock Reduction Heat-Resistant Nylon Grip Handle, 7-Inch
Asin: B0CKWHZV48 | Model: H80612 | PartNumber: H80612 | Ean: 0092644810145 | UPC: 092644810145
Effortless Slag Removal: Easily Clears Slag From Welds For A Smoother Finish.
Shock Absorbing Grip: Minimizes Hand Fatigue For Extended Comfort.
Optimal Balance: Well-Balanced Design Offers Precise Control During Use.
Durable Hammer: Tempered Steel Construction Ensures Long-Lasting Performance.
Features
- HEAT-RESISTANT GRIP: Reduces handle damage from welding heat, and sparks for enhanced longevity
- DURABLE HAMMER: Tempered steel construction ensures long-lasting performance
- EFFORTLESS SLAG REMOVAL: Easily clears slag from welds for a smoother finish
- OPTIMAL BALANCE: Well-balanced design offers precise control during use
- SHOCK ABSORBING GRIP: Minimizes hand fatigue for extended comfort
- See more on Amazon...
Brand: Klein Tools | Manufacturer: Klein Tools
Dimensions: 9.85 x 6.68 x 1.21 inches | Weight: 1.28 Pounds
Warranty: Please refer to attached warranty document.
See On Amazon #12
Hynade Welding Hammer with Coil Spring Handle,Wire Brush 9.5 Inch Wood Handle,Cone and Vertical Chisel Welding Chipping Hammer and Welding Slag Metal Rust Removal Scratch Brush
Asin: B0C23TWSQ8 | Model: HY-CZSZ-03 | PartNumber: HY-CZSZ-03
Size: Welding Wire Brush Length 9.5 Inch, Brush Head 5 Inch, Bristle Length 1 Inch, 4*16 Rows Of Bristles,Large Bristles Cover A Large Area To Remove Rust. Welding Slag Hammer Length About 11 Inch ,6 Inch Width ,One End Is A Flat Chisel And The Other End Is A Conical Chisel To Get Into Tight Spots.
Package: 2Pcs*Wire Brush+ 1Pcs Slag Chipping Hammer.
Application: Welding Hammer And Wire Brush Can Help Remove Welding Slag And Welding Splash In The Weld.
Design: The Wire Scratch Brush Has An Ergonomic Handle And Totals Length 9.5 Inch，The Handle Has A Long Bend That Provides A Comfortable Grip And Easy Cleaning Of Nooks And Crannies. Welding Slag Hammer With Spring Handle Design, Absorb The Impact Of Contact, Shock Absorption, More Comfortable.
Features
- Material: The welding chipping hammer made of high carbon steel for maximum strength and safety. Stainless Steel Wire brush bristles are firmly embedded into the brush body for higher toughness and wear resistance. Hardened wire for less broken wires and lasts longer, helping you remove dirt quickly
- Design: The wire scratch brush has an ergonomic handle and totals length 9.5 inch the handle has a long bend that provides a comfortable grip and easy cleaning of nooks and crannies. Welding slag hammer with spring handle design, absorb the impact of contact, shock absorption, more comfortable
- Size: welding wire brush length 9.5 inch, brush head 5 inch, bristle length 1 inch, 4*16 rows of bristles,large bristles cover a large area to remove rust. Welding slag hammer length about 11 inch ,6 inch width ,one end is a flat chisel and the other end is a conical chisel to get into tight spots
- Application: Welding hammer and Wire brush can help remove welding slag and welding splash in the weld
- Package: 2pcs*Wire brush+ 1pcs Slag chipping hammer
- See more on Amazon...
Brand: hynade | Manufacturer: Hynade
See On Amazon #13
Groz 36560 2lbs Drilling Hammer with Fiberglass Handle, 11"
Asin: B0BGMD7VQZ | Model: 36560 | PartNumber: 36560 | Ean: 0194199349801 | UPC: 194199349801
Fully Forged Head Is Induction Hardened 50-58 Hrc And Tempered For Maximum Strength And Durability.
11" (280 Mm) Light Weight And Durable Fiberglass Handle For Heavy Blows In Areas With ‘Limited Swing’.
Duly Machined And Polished Faces Are Beveled To Prevent Chipping.
For Day-To-Day Demands Of Professional Contractors.
Features
- 2lbs Drilling Hammer with Fiberglass Handle, Overall Length: 11"
- For day-to-day demands of professional contractors
- Fully forged head is induction hardened 50-58 HRC and tempered for maximum strength and durability
- Duly machined and polished faces are beveled to prevent chipping
- 11 (280 mm) light weight and durable fiberglass handle for heavy blows in areas with limited swing
- See more on Amazon...
Brand: Groz | Manufacturer: Groz
Dimensions: 0.83 x 12.99 x 3.94 Inches | Weight: 2.43 pounds
See On Amazon #14
Hobart 770069 Welding Hammer Chipping - with Wire Brush, Black
Asin: B0017Z5IZ4 | Model: 770069 | PartNumber: 770069 | Ean: 0735090718138, 0732454220962, 0785533905816, 0715959241830 | UPC: 715959241830, 785533905816, 732454220962, 735090718138
Item Package Dimension: 11.8" L X 5.5" W X 1.5" H.
Item Package Weight: 1.3 Lb.
Model Number: 770069.
Features
- Country Of Origin: China
- Model Number: 770069
- Item Package Dimension: 11.8 L x 5.5 W x 1.5 H
- Item Package Weight: 1.3 lb
- See more on Amazon...
Brand: Hobart | Manufacturer: Hobart
Weight: 1.08 Pounds
See On Amazon #15
VASTOOLS Welding Chipping Hammer with Coil Spring Handle,10.5",Cone and Vertical Chisel,11" Wire Brush
Asin: B0CMXLFT94 | Model: CVCH | PartNumber: CVCH | Ean: 0655160857676 | UPC: 655160857676
Tempered Chisel On One End And Point On The Other.1-1/16" Width Chisel To Remove Welding Slag Faster..
Welding Chipping Hammer And Steel Wire Brush, Makes It Easy To Clean And Remove Slag From All Your Welds..
Wire Brushes Are Ideal For Removing Paint Stains, Rust, Welding Slag,Solder,Scale..
Holes In The Handles Make Hanging Simple For Convenient Storage..
11" Overall Length, The Bristle Length Is About 1", 4X15 Rows Of Bristles For Excellent Coverage..
Spring Handle Designed To Absorb The Shock Of Contact While Cleaning And Shipping Way Welding Debris..
Features
- High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length.
- Spring handle designed to absorb the shock of contact while cleaning and shipping way welding debris.
- Tempered chisel on one end and point on the other.1-1/16 width chisel to remove welding slag faster.
- 11 Overall Length, the Bristle length is about 1, 4X15 Rows of bristles for excellent coverage.
- Wire brushes are ideal for removing paint stains, rust, welding slag,solder,scale.
- Holes in the handles make hanging simple for convenient storage.
- Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds.
- See more on Amazon...
Brand: VASTOOLS | Manufacturer: BYHH
Dimensions: 1.60 x 10.50 x 6.10 Inches
See On Amazon #16
28-ounce Welding Chipping Hammer Slag Removal Tool, Welding/Chiseling Hammer, with Forged Steel Construction and Shock-Absorbing Handle, an all-steel Geologist's Rock Pick. (shape4)
Asin: B0CDHFGS87 | Model: XSUS | PartNumber: XSUS
【Versatile Applications】: Also Suitable For Preliminary Hardness Measurement Of Rocks. The Hardness Of Rocks Can Be Determined By The Sound Produced When Striking The Rock. Perfect For Field Practices, Surveys, Specimen Collection, And Industries Like Oil Refining, Petrochemicals, And Coal Mining..
【Thoughtful Service, Reassuring Choice】 To Enable You To Use Our Slag Chipping Hammer With Peace Of Mind, We Offer Top-Notch After-Sales Service, Always Ready To Listen To Your Feedback And Suggestions, And Resolve Any Issues You Encounter During Use. Our Continuous Improvement And Innovation Of Products Aim To Enhance The User Experience, Allowing You To Feel Our Sincerity And Dedication Throughout Usage..
【High-Quality And Durable】: To Guarantee The Sturdiness And Durability Of The Slag Hammer, We Use High-Carbon Steel, Making It Even More Resilient And Long-Lasting. Its Surface Is Polished To Significantly Enhance Hardness, Allowing It To Easily Handle Various Rock Hardness Tests. Moreover, The Welding Chipping Hammer Undergoes A Heat Treatment Process, Providing Exceptional Impact Resistance And Wear Resistance, Even In Harsh Environments..
【World-Class Quality, Global Reach】 We Consistently Adhere To High Manufacturing Standards And Strict Quality Control, Ensuring That Welding Chipping Hammer Represents Superior Quality. This Commitment To Excellence And Quality Has Earned Recognition And Trust From The Market And Customers. Currently, Our Products Have Been Exported To More Than 100 Countries And Regions, Receiving Praise And Loyalty From Both New And Existing Customers..
【Anti-Slip Handle】: Our Chipping Hammer Handle Is Made Of Soft Rubber, Offering Not Only Anti-Slip Functionality But Also Effective Shock Absorption. When In Use, The Hammer Provides A Pleasant Grip And Outstanding Control, Making Your Operations More Precise And Effortless. Its Design Takes Into Account Long-Term Comfort During Usage, Ensuring That You Won't Feel Fatigued And Can Fully Immerse Yourself In Your Work..
【Usage】: Precision Cast With High Density And Exceptional Hardness; Ideal For Rust And Slag Removal In Shipbuilding And Welding Processes; Equipped With A Transport Hole Design; The Handle Is Encased With Compressed Fiberglass And Covered With Pp And Tpr Materials, Ensuring Durability And Resistance To Various Weather Conditions And Oil..
Features
- Premium Slag Remover Chisel/Welding Hammer - Perfect for cleaning and removing molten slag from all weld seams.This welding chipping hammer is specifically designed for the purpose of removing slag and chipping during welding. Please refrain from using it as an axe or sledgehammer.
- Usage : Precision cast with high density and exceptional hardness; ideal for rust and slag removal in shipbuilding and welding processes; equipped with a transport hole design; the handle is encased with compressed fiberglass and covered with PP and TPR materials, ensuring durability and resistance to various weather conditions and oil.
- Versatile Applications : Also suitable for preliminary hardness measurement of rocks. The hardness of rocks can be determined by the sound produced when striking the rock. Perfect for field practices, surveys, specimen collection, and industries like oil refining, petrochemicals, and coal mining.
- Anti-Slip Handle : Our chipping hammer handle is made of soft rubber, offering not only anti-slip functionality but also effective shock absorption. When in use, the hammer provides a pleasant grip and outstanding control, making your operations more precise and effortless. Its design takes into account long-term comfort during usage, ensuring that you won't feel fatigued and can fully immerse yourself in your work.
- High-Quality and Durable : To guarantee the sturdiness and durability of the slag hammer, we use high-carbon steel, making it even more resilient and long-lasting. Its surface is polished to significantly enhance hardness, allowing it to easily handle various rock hardness tests. Moreover, the welding chipping hammer undergoes a heat treatment process, providing exceptional impact resistance and wear resistance, even in harsh environments.
- World-class quality, global reach We consistently adhere to high manufacturing standards and strict quality control, ensuring that welding chipping hammer represents superior quality. This commitment to excellence and quality has earned recognition and trust from the market and customers. Currently, our products have been exported to more than 100 countries and regions, receiving praise and loyalty from both new and existing customers.
- Thoughtful service, reassuring choice To enable you to use our slag chipping hammer with peace of mind, we offer top-notch after-sales service, always ready to listen to your feedback and suggestions, and resolve any issues you encounter during use. Our continuous improvement and innovation of products aim to enhance the user experience, allowing you to feel our sincerity and dedication throughout usage.
- See more on Amazon...
Brand: Hear XSUS | Manufacturer: Hear XSUS
Dimensions: 12.50 x 6.60 x 2.10 inches | Weight: 1.75 pounds
See On Amazon #17
Estwing Drilling/Crack Hammer - 2-Pound Sledge with Forged Steel Construction & Shock Reduction Grip - B3-2LB , Blue
Asin: B002CRTL4A | Model: B3-2LB | PartNumber: B3-2LB
Ean: 7535001689099, 0633643953886, 0743153114032, 7241870623286, 0034139620013, 0640024942421, 7535001600957, 0636123633049, 0709730207832
UPC: 743153114032, 636123633049, 709730207832, 633643953886, 640024942421, 034139620013
Forged In One Piece – The Most Durable, Longest Lasting Striking Tools Available Are Crafted From A Single Piece Of Solid Steel And Honed Into The Optimal Design For Use..
Made In The Usa – Since 1923, Our Tools Have Been Proudly American Made In Rockford, Il Using Only The Finest American Steel..
Patented Shock Reduction Grip - Reducing Impact Vibration By 70%, Estwing's Molded Shock Reduction Grip Provides Optimal Slip-Free Comfort, Durability And Superior Grip In All Jobsite Conditions.
Versatility On The Job - Optimally Designed Mini Sledge Hammer For Use With Chisels, Punches, Star Drills, Hardened Nails & More..
Features
- HEAVY HITTING 2LB HAMMER - This perfectly balanced drilling hammer will deliver powerful blows with an easy swing.
- VERSATILITY ON THE JOB - Optimally designed mini sledge hammer for use with chisels, punches, star drills, hardened nails & more.
- FORGED IN ONE PIECE The most durable, longest lasting striking tools available are crafted from a single piece of solid steel and honed into the optimal design for use.
- PATENTED SHOCK REDUCTION GRIP - Reducing impact vibration by 70%, Estwing's molded shock reduction grip provides optimal slip-free comfort, durability and superior grip in all jobsite conditions
- MADE IN THE USA Since 1923, our tools have been proudly American made in Rockford, IL using only the finest American steel.
- See more on Amazon...
Brand: Estwing | Manufacturer: Estwing
Dimensions: 1.00 x 10.50 x 3.50 inches | Weight: 2.00 pounds
Warranty: Manufacturer
See On Amazon #18
KSEIBI 271045 Engineers Machinist Blacksmith Strike Club Hammer (Wood Handle, 0.66 lb / 300 grams)
Asin: B07D2BKCJY | Model: 271 | PartNumber: 271 | Ean: 4021402710454
A Wide Variety Of Projects Can Be Finished With This Engineer Hammer Such As Striking, Shaping, And Bending Unhardened Metal Or Shaping Block, Brick, And Stone..
This Cross Peen Hammer Handle Is Made Of Wood Making This Metal Working Hammer An Ideal Tool For All Metal Works..
This Blacksmithing Hammer Is An Essential Tool For Forging And Can Help You Finish And Get The Job Done In Any Metal Fabrication Tasks, Home Improvement, Or Construction Sites..
Features
- The hammer is made of high-carbon steel with heat treatment, high hardness, good toughness and durable.
- This blacksmithing hammer is an essential tool for forging and can help you finish and get the job done in any metal fabrication tasks, home improvement, or construction sites.
- A wide variety of projects can be finished with this engineer hammer such as striking, shaping, and bending unhardened metal or shaping block, brick, and stone.
- This cross peen hammer handle is made of wood making this metal working hammer an ideal tool for all metal works.
- See more on Amazon...
Brand: KSEIBI | Manufacturer: KSEIBI
Weight: 0.66 pounds
See On Amazon #19
XtremepowerUS 1180W SDS-Plus Electric Rotary Hammer 1-1/4" Combination Rotary Hammer Drilling Chisels & Drill Bits Set with Case
Asin: B08286SHJX | Model: 45356 | PartNumber: 45356 | Ean: 0812365033674 | UPC: 812365033674
Powerful Impact Energy - 15J Impact Energy Is Designed To Complete Easily And Precisely Concrete And Metal Working Projects. Well Designed Heat Dissipation Motor And Double Anti-Dust Bottom Structure Can Extend The Hammer's Use Life..
Various Drilling Modes And Bits - Sds Plus Bull Point Chisel, Sds Plus Flat Chisel, 3Pc. Sds Drill Bit Set, Face Mask, Goggle, Gloves, Storage Case, And Extra Set Of Carbon Brushes.
Flexible Swivel Handle - Adjustable 360 Degree Side Handle And Ergonomic D-Grip Handle For Comfort And Control. Rotating Swivel Lock Handle Can Be Detached Or Re-Positioned For Better Utilization..
Variable Speed - With A No Load Speed 600 Rpm And Variable Speed Trigger, You'll Always Remain In Total Control Of Your Tool, Whatever The Job At Hand. For Added Ease Of Use, The Drill Also Includes An Anti-Vibration Mechanism, And Auxiliary Handle. (Bit Type Accepts: Sds Plus).
Features
- Rotary Hammer Drill - Perfect for tough tasks such as demolishing brickwork, removing plaster, taking off tiles and digging out old grouting. The drill is powered by an impressive motor, making it suitable for drilling into materials including masonry, wood and metal
- Variable Speed - With a no load speed 600 RPM and variable speed trigger, you'll always remain in total control of your tool, whatever the job at hand. For added ease of use, the drill also includes an anti-vibration mechanism, and auxiliary handle. (Bit Type Accepts: SDS Plus)
- Powerful Impact Energy - 15J impact energy is designed to complete easily and precisely concrete and metal working projects. Well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life.
- Flexible Swivel Handle - Adjustable 360 degree side handle and ergonomic D-grip handle for comfort and control. Rotating swivel lock handle can be detached or re-positioned for better utilization.
- Various Drilling Modes and Bits - SDS Plus Bull Point Chisel, SDS Plus Flat Chisel, 3pc. SDS Drill Bit Set, Face Mask, Goggle, Gloves, Storage Case, and Extra Set of Carbon brushes
- See more on Amazon...
Brand: XtremepowerUS | Manufacturer: XtremepowerUS
Dimensions: 5.25 x 14.50 x 17.00 inches | Weight: 13.00 pounds
See On Amazon #20
ARCFONY 4PCS Welding Slag Removal Tool Set - Include a Pair Welding Gloves, 10 Welding Chipping Hammer with Coil Spring Handle, 2PCS 9.5 Wire Brush
Asin: B0C2CG1429 | Model: HJTZ | PartNumber: HJTZ | Ean: 0792105490076 | UPC: 792105490076
Welding Gloves Are Made Of Leather And Have Excellent Insulation, Which Can Protect The Hands Of Welders From High Temperatures And Sparks. The Thickness Of These Welding Gloves Is 1.5Mm, Providing Sufficient Protection Without Sacrificing Comfort Or Flexibility..
Wide Application: The Welding Slag Removal Kit Can Clean Various Welding Projects, Electrical Work, And Mechanical Work. Hammer Can Be Used As A Life-Saving Hammer And Ice-Breaking Hammer. Wire Brushes Can Be Used To Clean Rust On Railings, Iron Sheets, Etc., Which Is Very Practical.
Wire Brush Bristles Are Firmly Embedded Into The Wire Brush Body For Higher Toughness And Wear Resistance. Helping You Quickly Remove Dirt From Different Surface Types. Wire Brush Length 9.5 Inches, Brush Head 5 Inches, Bristle Length 1 Inch, 4*16 Rows Of Bristles, 2Pcs.
The Welding Chipping Hammer Is Made Of High-Strength Steel. Adopting A Double Headed Design With One End Being A Flat Chisel And The Other End Being A Pointed Chisel. The Spring Handle Is Designed To Absorb The Impact Of Contact When Welding Debris..
Features
- Package includes: Welding slag remover tool set, including 1 welding hammer, 2 wire brushes, 1 pair of welding gloves, a total of 4 pieces. With this set of welding tools kit, you can quickly remove rust and slag during the welding process and keep the work clean.
- The welding chipping hammer is made of high-strength steel. Adopting a double headed design with one end being a flat chisel and the other end being a pointed chisel. The spring handle is designed to absorb the impact of contact when welding debris.
- Welding gloves are made of leather and have excellent insulation, which can protect the hands of welders from high temperatures and sparks. The thickness of these welding gloves is 1.5mm, providing sufficient protection without sacrificing comfort or flexibility.
- Wire brush bristles are firmly embedded into the wire brush body for higher toughness and wear resistance. Helping you quickly remove dirt from different surface types. Wire brush length 9.5 inches, brush head 5 inches, bristle length 1 inch, 4*16 rows of bristles, 2PCS
- Wide Application: The welding slag removal kit can clean various welding projects, electrical work, and mechanical work. Hammer can be used as a life-saving hammer and ice-breaking hammer. Wire brushes can be used to clean rust on railings, iron sheets, etc., which is very practical
- See more on Amazon...
Brand: ARCFONY | Manufacturer: ARCFONY
See On Amazon
Looking For Something Else?
Search