Teyleten Robot MAX9814 Electret Microphone AGC Amplifier Module Auto Gain Control Release Ratio Low THD for Arduino 3pcs
Asin: B0B7SP6GYX | Model: B0B7SP6GYX_CA NARF | PartNumber: B0B7SP6GYX_CA NARF | Ean: 9331632590418
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Device Features A Low-Noise Front-End Amplifier, Variable Gain Amplifier (Vga), Output Amplifier, Microphone Bias Voltage Generator, And Agc Control Circuit.
Features
- The MAX9814 is a low-cost, high-performance microphone amplifier with automatic gain control (AGC) and low-noise microphone bias.
- The device features a low-noise front-end amplifier, variable gain amplifier (VGA), output amplifier, microphone bias voltage generator, and AGC control circuit
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.39 x 0.98 x 0.59 Inches
See On Amazon Similar To Teyleten Robot MAX9814 Electret Microphone
#1
6 Pieces Electret Microphone Amplifier Module MAX4466 Adjustable Gain Blue Breakout Board
Asin: B08N4FNFTR | Model: Weewooday-Microphone Amplifier-01 | PartNumber: Weewooday-Microphone Amplifier-01
20-20Khz Electret Microphone Soldered On: Comes With A 20-20Khz Electret Microphone Soldered On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
Power Supply Noise Rejection Function: The Amplifier Has Good Power Supply Noise Rejection.
Easy To Use: Connect Gnd To Ground, Vcc To 2.4-5Vdc; For The Good Performance, Use The 'Quietest' Supply Available (This Would Be The 3.3V Supply).
Parameters: Power Supply Voltage: +2.4V To +5.5V (Can Be Compatible With Stm, Raspberry Pi And Other Development Board Motherboards); Power Supply Rejection Ratio: 112Db; Common Mode Rejection Ratio: 126Db; Avol: 125Db (Rl = 100Kω) Rail-To-Rail Output; Quiescent Power Supply Current: <24Μa; Gain Bandwidth: 600Khz.
Features
- Application: MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
- Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100k ) rail-to-rail output; Quiescent power supply current: <24 A; Gain bandwidth: 600kHz
- 20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
- Easy to use: connect GND to ground, VCC to 2.4-5VDC; For the good performance, use the 'quietest' supply available (this would be the 3.3V supply)
- Power supply noise rejection function: the amplifier has good power supply noise rejection
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
See On Amazon #2
HiLetgo 2pcs Electret Microphone Amplifier MAX4466 Module Adjustable Gain Blue Breakout Board for Arduino
Asin: B07DRGF8C2 | Model: 3-01-1491-2pcs | PartNumber: 3-01-1491-2pcs
For The Best Performance, Use The "Quietest" Supply Available (On An For Arduino, This Would Be The 3.3V Supply).
This Breakout Board Is Best Used For Projects Such As Voice Changers, Audio Recordingmpling, And Audio-Reactive Projects That Use Fft.
The Amplifier Has Excellent Power Supply Noise Rejection.
Using The Max4466, An Op-Amp Specifically Designed For Amplifier.
Features
- The board comes with a 20-20KHz electret microphone soldered on
- Using the MAX4466, an op-amp specifically designed for amplifier
- For the best performance, use the quietest supply available (on an for Arduino, this would be the 3.3V supply)
- The amplifier has excellent power supply noise rejection
- This breakout board is best used for projects such as voice changers, audio recordingmpling, and audio-reactive projects that use FFT
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
Cylewet 10Pcs Cylindrical Electret Condenser Microphone Pickup with 2 Pins 9 7mm for Arduino (Pack of 10) CYT1013
Asin: B01N0VMN9P | Model: 7545900980 | PartNumber: 7545900980 | Ean: 0717850057732 | UPC: 717850057732
Sensitivity: -48－66Db
.
Current Consumption: Max 500Ua
.
Frequency Range: 50 20Khz
.
Length: 7Mm/ 0.28Inches
.
Features
- Diameter: 9mm/ 0.35inches
- Length: 7mm/ 0.28inches
- Sensitivity: -48 66dB
- Frequency Range: 50 20KHz
- Current Consumption: Max 500uA
- See more on Amazon...
Brand: Cylewet | Manufacturer: Qianxin
Weight: 0.00 Pounds
See On Amazon #4
Neewer 2-Pack Pencil Stick Condenser Mic with Interchangeable Omni Cardioid and Super Cardioid Capsules Foam Windscreens Mic Clip and Carrying Case for Acoustic Woodwind Instruments
Asin: B073CXBYLT | Model: 40090158 | PartNumber: 40090158 | Ean: 0191073018419 | UPC: 191073018419
5/8-Inch Mic Clip And Windscreen: Clip Fits Most Microphone Stand With 5/8-Inch Thread, Can Firmly Hold Your Microphone In Different Positions. Foam Windscreen Can Minimize Air Interference During Recording For More Clarity Sound.
Foam Padded Aluminum Case: Made Of Durable Aluminum, Ensures High Durability. Foam Padded Inner Can Protect Your Mics And Accessories From Scratching. It It Easy To Transport And Set Up Your Condenser Mics.
Widely Use: Widely Used For Recording Studio Vocals, Acoustic, Instruments, Strings, Horns, Orchestras And Choral Groups, Ambient Instrument Audio, And Many Live Sound Applications.
Features
- INTERCHANGEABLE CAPSULES THREE DIRECTIOANS: Includes cardioid, omni and super capsules for use in virtually most recording situation. You can get the sound you want, whether its subtle nuances of a studio recording or the dynamic sparkle of a live orchestra. Easy to mount and remove
- WIDELY USE: Widely used for recording studio vocals, acoustic, instruments, strings, horns, orchestras and choral groups, ambient instrument audio, and many live sound applications
- 5/8-INCH MIC CLIP AND WINDSCREEN: Clip Fits most microphone stand with 5/8-inch thread, can firmly hold your microphone in different positions. Foam windscreen can minimize air interference during recording for more clarity sound
- FOAM PADDED ALUMINUM CASE: Made of durable aluminum, ensures high durability. Foam padded inner can protect your mics and accessories from scratching. It it easy to transport and set up your condenser mics
- See more on Amazon...
Brand: Neewer | Manufacturer: Neewer
Dimensions: 4.33 x 9.45 x 7.87 inches
See On Amazon #5
Adafruit Electret Microphone Amplifier - MAX9814 with Auto Gain Control [ADA1713]
Asin: B00SLYAI9K | Model: FBA_ADA1713 | PartNumber: FBA_ADA1713 | Ean: 0711978442593, 0748347526912, 5697232113155 | UPC: 748347526912, 711978442593
Great For When You Want To Record Or Detect Audio In A Setting Where Levels Change.
Can Be Easily Used With Any Analog/Digital Converter That Is Up To 3.3V Input.
Built In Automatic Gain Control.
Features
- Add an ear to your project with this well-designed electret microphone amplifier
- Built in automatic gain control
- Great for when you want to record or detect audio in a setting where levels change
- Can be easily used with any Analog/Digital converter that is up to 3.3V input
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.59 x 3.94 x 2.36 Inches | Weight: 0.01 pounds
See On Amazon #6
Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H (3421)
Asin: B06XNL2GBW | Model: 3421 | PartNumber: 3421 | Ean: 0717520031291, 0604776613404, 7442870792389 | UPC: 717520031291, 604776613404
Good For Just About All General Audio Recording/Detection.
Purely Digital, No Analog Conversion Required!.
Low Cost Mems Mic With A Range Of About 50Hz - 15Khz.
Features
- Smaller and thinner than 'classic' electret microphones
- Low cost MEMS mic with a range of about 50Hz - 15KHz
- Good for just about all general audio recording/detection
- Purely digital, No analog conversion required!
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches
See On Amazon #7
ARCELI 2pcs Electret Microphone Amplifier, GY-MAX4466 Breakout Sensor with Adjustable Gain Control for Arduino
Asin: B07MY293KD | Model: 00364 | PartNumber: 00364 | Ean: 8011678690686
3. Using Is Simple: Connect Gnd To Ground, Vcc To 2.4-5Vdc. For The Best Performance, Use The "Quietest" Supply Available (On An Arduino, This Would Be The 3.3V Supply)..
4.For Audio-Reactive Projects, We Suggest Using An Fft Driver Library Which Can Take The Audio Input And 'Translate' It Into Frequencies..
2. Add An Ear To Your Project With This Well-Designed Which Has Excellent Power Supply Noise Rejection..
Features
- 1. This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x.
- 2. Add an ear to your project with this well-designed which has excellent power supply noise rejection.
- 3. Using is simple: connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the quietest supply available (on an Arduino, this would be the 3.3V supply).
- 4.For audio-reactive projects, we suggest using an FFT driver library which can take the audio input and 'translate' it into frequencies.
- See more on Amazon...
Brand: ARCELI | Manufacturer: ARCELI
See On Amazon #8
Weewooday 10 Pieces Electret Microphone Amplifier Adjustable MAX4466 Module Microphone Preamplifier Blue Breakout Board Compatible with Arduino
Asin: B08TTM371D | Model: Weewooday-Size Name-P057 | PartNumber: Weewooday-Size Name-P057
20-20Khz Electret Microphone Soldered On: Comes With A 20-20Khz Electret Microphone Soldered On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
Power Supply Noise Rejection Function: The Amplifier Has Good Power Supply Noise Rejection.
Easy To Use: Connect Gnd To Ground, Vcc To 2.4-5Vdc; For The Good Performance, Use The 'Quietest' Supply Available (This Would Be The 3.3V Supply).
Parameters: Power Supply Voltage: +2.4V To +5.5V (Can Be Compatible With Stm, Raspberry Pi And Other Development Board Motherboards); Power Supply Rejection Ratio: 112Db; Common Mode Rejection Ratio: 126Db; Avol: 125Db (Rl = 100 Thousands Of Ohm Meter) Rail-To-Rail Output; Quiescent Power Supply Current: Less Than 24 Microamp; Gain Bandwidth: 600Khz.
Features
- Application: the MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
- Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100 thousands of ohm meter) rail-to-rail output; Quiescent power supply current: less than 24 microamp; Gain bandwidth: 600kHz
- 20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
- Easy to use: connect GND to ground, VCC to 2.4-5VDC; For the good performance, use the 'quietest' supply available (this would be the 3.3V supply)
- Power supply noise rejection function: the amplifier has good power supply noise rejection
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
See On Amazon #9
E-outstanding MIC Electret Condenser Microphone 10PCS 6027 High Sensitivity Remote Intelligent Speech Recognition Microphone With 2 Wire Leads and 1.25 Terminal
Asin: B08NVN3DH8 | Model: MICECMLT-10 | PartNumber: MICECMLT-10 | Ean: 0750225359444 | UPC: 750225359444
Made Of High-Quality Materials And Has A Long Service Life..
Widely Used In Phones, Mobile Phones, Mp3, Mp4, Notebook Computers, Digital Cameras, Walkie-Talkies, Monitors..
Electret Condenser Microphone, Rear Electret Type, Small Size, Usually Used..
Audio Track: Dual Track (Stereo). Sensitivity: -40-3Db.Cable Length: 60Mm..
Features
- Model: 6027. Size: 4x1.5mm.
- Audio track: dual track (stereo). Sensitivity: -40-3dB.Cable length: 60mm.
- Made of high-quality materials and has a long service life.
- Electret condenser microphone, rear electret type, small size, usually used.
- Widely used in phones, mobile phones, MP3, MP4, notebook computers, digital cameras, walkie-talkies, monitors.
- See more on Amazon...
Brand: E-outstanding | Manufacturer: E-outstanding
See On Amazon #10
HiLetgo 10pcs Electret Condenser Microphone 52dB MP3 Microphone Accessories 6x2.2mm
Asin: B00LZV1ERG | Model: 3-01-0439 | PartNumber: 3-01-0439 | Ean: 0702082656624 | UPC: 702082656624
Frequency Response: 50 ~ 20Khz.
Sensitivity:-48Db ~ 66Db.
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #11
uxcell 10Pcs 6mm x 3.5mm 2 Wire Cable MIC Electret Condenser Stereo Microphone High Sensitivity 3.5mm Electret Microphone
Asin: B00FGV867M | Model: TRTV2894 | PartNumber: TRTV2894
Clear Audio Quality: With A 3.5Mm Jack Connector Type, High Sensitivity And Low Noise, This 3.5Mm Electret Microphone Is Perfect For Stereo Recording, Providing High-Quality Cleared Audio For All Your Recording Needs.
Size And Package: Each Size: 6 X 3.5Mm/0.24" X 0.14" (D*H); Wire Length: 40Mm/1.6"; Package Content: 10 X Electret Microphone.
Feature: An Acoustic-To-Electric Transducer Or A Sensor That Converts Sounded Into An Electrical Signal.
Application: Electret Condenser Mic Is Widely Applied To Telephone, Mobile Phone, Mp3, Mp4, Laptop, Digital Camera, Intercom, Monitor, Etc.
Features
- Electret Condenser Microphone: Back electret type, small in size, in general use. Come with a 2 wire cable for easy connectivity to your device
- Application: Electret condenser mic is widely applied to telephone, mobile phone, MP3, MP4, laptop, digital camera, intercom, monitor, etc
- Clear Audio Quality: With a 3.5mm jack connector type, high sensitivity and low noise, this 3.5mm electret microphone is perfect for stereo recording, providing high-quality cleared audio for all your recording needs
- Feature: An acoustic-to-electric transducer or a sensor that converts sounded into an electrical signal
- Size and Package: Each Size: 6 x 3.5mm/0.24 x 0.14 (D*H); Wire Length: 40mm/1.6; Package Content: 10 x Electret Microphone
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.01 Pounds
See On Amazon #12
FMHXG 6050P Electret Microphone, 20PCS, 6x5mm Through Hole, XLR Connectivity, Aluminium Seal, 48-65dB Sensitivity, 2V DC Working Voltage
Asin: B0BN6FGTFC | Model: 6050p | PartNumber: 6050p
Model: 6050P; Working Voltage: 2V Dc; Sensitivity: 48-65Db; Size: 6 X 5Mm, Type: Type With Pin; Number Of Pins: 2; Pin Length: 10 Mm / 0.39 Inches..
Application: Electret Condenser Microphones Support Communication And Recording Of Telephones, Smartphones, Desktop Computers, Headphones, Recording Systems And Other Devices..
Package Includes: 20Pcs Electret Condenser Microphones.
Pros: The Electret Microphone Is An Electrostatically Capacitor-Based Microphone That Eliminates The Need For Polarized Power By Using Permanently Charged Materials..
Features
- Material: The compact design of the aluminium seal optimizes sound accuracy and ensures a long service life.
- Pros: The electret microphone is an electrostatically capacitor-based microphone that eliminates the need for polarized power by using permanently charged materials.
- Model: 6050P; Working voltage: 2V DC; SENSITIVITY: 48-65DB; Size: 6 x 5mm, Type: Type with pin; Number of pins: 2; pin length: 10 mm / 0.39 inches.
- Package includes: 20PCS electret condenser microphones
- Application: Electret condenser microphones support communication and recording of telephones, smartphones, desktop computers, headphones, recording systems and other devices.
- See more on Amazon...
Brand: FMHXG | Manufacturer: FMHXG
See On Amazon #13
uxcell 10pcs 6mm x 3.5mm Mini Electret Microphone Condenser Pickup w Lead
Asin: B00X7BN98Y | Model: a15031100ux0125 | PartNumber: a15031100ux0125 | Ean: 0696611049189 | UPC: 696611049189
Color : Silver Tone, Black.
Package Content : 10Pcs X Electret Microphone.
Net Weight : 1G.
Thickness : 3.5Mm / 0.14";Wire Length : 30Mm / 1.2".
Features
- Product Name : Electret Microphone;Diameter : 6mm / 0.24"
- Thickness : 3.5mm / 0.14;Wire Length : 30mm / 1.2
- Color : Silver Tone, Black
- Net Weight : 1g
- Package Content : 10Pcs x Electret Microphone
- See more on Amazon...
Brand: sourcing map | Manufacturer: uxcell
See On Amazon #14
WWZMDiB 3Pcs GY-MAX4466 Sound Sensor, Electret Microphone Amplifier, Microphone Tunable Amplifier Module
Asin: B0BVH1T8FC | Ean: 0744603649708 | UPC: 744603649708
⚡【Power Supply Rejection Ratio】：112Db.
⚡【Gain Bandwidth】：600Khz.
⚡【Avol】： 125Db (Rl = 100Kω) Rail-To-Rail Output.
⚡【Static Supply Current】：24Μa.
⚡【Common Mode Rejection Ratio】：126Db.
⚡【Supply Voltage】: +2.4V To +5.5V (Can Be Directly Connected To Stm/Ardunio/Raspberry Pi Development Boards).
Features
- MAX4466 Sound Sensor The module contains ferrite on both Vcc and ground leads to minimize power supply noise. If used with an MCU, it is best to use the quietest power supply available in the 2.4V - 5.5V range. On the Arduino, this is typically a 3.3V supply.
- Supply voltage : +2.4V to +5.5V (can be directly connected to STM/ARDUNIO/Raspberry Pi development boards)
- Power supply rejection ratio 112dB
- Common mode rejection ratio 126dB
- AVOL 125dB (RL = 100k ) Rail-to-rail output
- Static supply current 24 A
- Gain bandwidth 600kHz
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #15
Dahszhi MIC Electret Condenser Stereo Microphone 6mm Dia 3.5mm Thick - Pack of 5
Asin: B07S1MG846 | Model: DZ1901260060 | PartNumber: DZ1901260060 | Ean: 0747130089238 | UPC: 747130089238
Electret Condenser Microphone, Back Electret Type, Small In Size, In General Use..
Widely Applied To Telephone, Mobile Phone, Mp3, Mp4, Laptop, Digital Camera, Intercom, Monitor, Etc..
An Acoustic-To-Electric Transducer Or A Sensor That Converts Sound Into An Electrical Signal..
Each Size : 6 X 3.5Mm / 0.24" X 0.14" (D*H); Wire Length : 45Mm/1.78".
Features
- Package Content : 5 x Electret Condenser Microphone
- Each Size : 6 x 3.5mm / 0.24 x 0.14 (D*H); Wire Length : 45mm/1.78
- Electret condenser microphone, back electret type, small in size, in general use.
- An acoustic-to-electric transducer or a sensor that converts sound into an electrical signal.
- Widely applied to telephone, mobile phone, MP3, MP4, laptop, digital camera, intercom, monitor, etc.
- See more on Amazon...
Brand: Dahszhi | Manufacturer: Yohii
See On Amazon #16
uxcell 30Pcs 6050 Electret Microphone Pickup 6mm x 5mm Cylindrical Electret Condenser Mic Inserts with Pins for PCB
Asin: B00LUUHB1K | Model: a14032200ux0279 | PartNumber: a14032200ux0279
Application: Electret Condenser Microphone Enable Communication And Recording In Devices Including Telephones, Smartphones, Desktop Computers, Headsets, Recording Systems And More..
Feature: Microphone Sensor Is A Type Of Electrostatic Capacitor-Based Microphone, Which Eliminates The Need For A Polarizing Power Supply By Using A Permanently Charged Material..
Compact And Lightweight: These Microphone Pickups Are Designed To Be Compact And Lightweight, Making Portable And Easy To Use In Different Settings..
Low Self-Noise: These Miniature Microphones Have High Sensitivity And Low Self-Noise Levels, Resulting In Cleaner Recordings Without Unwanted Background Noise Interference..
Features
- Specifications of Electret Microphone: Material: Metal; Model: 6050; Sensitivity: 36-38DB; Frequency Response: 40Hz-13KHZ; Size:(Not Included Pin): 6 x 5mm/0.24" x 0.2"(L*D); Type: with Pins Type; Pin Quantity: 2; Package Content: 30 x Electret Microphone.
- Low Self-Noise: These miniature microphones have high sensitivity and low self-noise levels, resulting in cleaner recordings without unwanted background noise interference.
- Application: Electret condenser microphone enable communication and recording in devices including telephones, smartphones, desktop computers, headsets, recording systems and more.
- Compact and Lightweight: These microphone pickups are designed to be compact and lightweight, making portable and easy to use in different settings.
- Feature: Microphone sensor is a type of electrostatic capacitor-based microphone, which eliminates the need for a polarizing power supply by using a permanently charged material.
- See more on Amazon...
First Available: 08/20/2018
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.40 x 5.50 x 3.90 Inches
See On Amazon #17
Adafruit Wired Miniature Electret Microphone [ADA1935]
Asin: B01BMREFDM | Model: ADA1935 | PartNumber: ADA1935 | Ean: 0701851960054 | UPC: 701851960054
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.08 x 0.17 x 0.17 Inches | Weight: 0.00 pounds
See On Amazon #18
4 Pcs MAX9814 Electret Microphone Amplifier AGC Microphone Preamplifier Module Auto Gain Control
Asin: B09NRD2W7X | Model: 13-310 | PartNumber: 13-310 | Ean: 0701715510081 | UPC: 701715510081
The Electret Microphone Amplifier Max9814 Has A Fixed 12Db Gain, While The Vga Gain Automatically Adjusts From 20Db To 0Db, Depending On The Output Voltage And The Agc Threshold..
The Max9814 Is Available In The Space-Saving, 14-Pin Tdfn Package. This Device Is Specified Over The -40°C To +85°C Extended Temperature Range. Max9814: Simplified Block Diagram Max9814: Simplified Block Diagram Enlarge+.
The Frequency Response Range Of The Product Is 20Hz-20Khz, Which Is Used For Programmable Attack And Release Ratio..
The Max9814 Microphone Agc Amplifier Is A Low-Noise Front-End Amplifier, Variable Gain Amplifier (Vga), Output Amplifier, Microphone Bias Voltage Generator And Agc Control Circuit.
Features
- The MAX9814 is a high-quality microphone amplifier with automatic gain control (AGC) and low-noise microphone bias.
- The MAX9814 Microphone AGC Amplifier is a low-noise front-end amplifier, variable gain amplifier (VGA), output amplifier, microphone bias voltage generator and AGC control circuit
- The electret microphone amplifier max9814 has a fixed 12dB gain, while the VGA gain automatically adjusts from 20dB to 0dB, depending on the output voltage and the AGC threshold.
- The frequency response range of the product is 20Hz-20KHz, which is used for programmable attack and release ratio.
- The MAX9814 is available in the space-saving, 14-pin TDFN package. This device is specified over the -40 C to +85 C extended temperature range. MAX9814: Simplified Block Diagram MAX9814: Simplified Block Diagram Enlarge+
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #19
HiLetgo SPH0645 I2S MEMS Microphone Breakout Module SPH0645LM4H Microphone Module 1.6-3.6V for Arduino Raspberry Pi
Asin: B082KRJW62 | Model: 3-01-1601 | PartNumber: 3-01-1601
Instead Of An Analog Output, There Are Three Digital Pins: Clock, Data And Left-Right (Word Select) Clock..
When Connected To Your Microcontroller/Computer, The 'I2s Master' Will Drive The Clock And Word-Select Pins At A High Frequency And Read Out The Data From The Microphone. No Analog Conversion Required..
The I2s Is A Small, Low Cost Mems Mic With A Range Of About 50Hz - 15Khz, Good For Just About All General Audio Recording/Detection..
Features
- SPH0645 I2S MEMS Microphone Breakout Board 50Hz-15KHz
- The I2S is a small, low cost MEMS mic with a range of about 50Hz - 15KHz, good for just about all general audio recording/detection.
- Instead of an analog output, there are three digital pins: Clock, Data and Left-Right (Word Select) Clock.
- When connected to your microcontroller/computer, the 'I2S Master' will drive the clock and word-select pins at a high frequency and read out the data from the microphone. No analog conversion required.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon
Looking For Something Else?
Search