Oreq Solar Charge Controller, Waterproof MPPT Boost Solar Charge Controller with Display, 24 85V Solar Panel Battery Intelligent Regulator, Solar Battery Maintainer for Solar System(400W)
Asin: B0B9HNGJPH | Model: Oreqbyo9sqg07i6454-13 | PartNumber: Oreqbyo9sqg07i6454-13 | Ean: 7069685513703
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: Oreq | Manufacturer: Oreq
See On Amazon Similar To Oreq Solar Charge Controller Waterproof
#1
Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Solar Panel Regulator w/ Temp Sensor Function Fit for Lithium, Sealed, Gel, and Flooded Batteries, Wanderer Li 30A
Asin: B07G1PL1B9 | Model: Charge Controller | PartNumber: Charge Controller | Ean: 0816360027676 | UPC: 816360027676
ăCompact In SizeăWhich Makes It Easy To Install Virtually Anywhere..
ăWanderer10a|30A Installation Notesă The Default Starting Position Of The Wanderer Controller Terminal Hatches Are Closed (In The Up Position) That Could Mistakenly Look Like An Open Wire Hatch. Make Sure To First Lower Each Terminal Hatch By Screwing The Terminals Counterclockwise (Ccw) To Expose The Wire Terminal Hatch To The Open Position. Then Secure Each Cable By Rotating The Screws Clockwise (Cw) To The Closed Position..
ăRemote Monitoringă The Rs232 Communication Port Allows The Renogy Rover Charge Controller To Communicate With The Dc Home App And Renogy One M1 Via The Renogy Bt-1 Bluetooth Module (Highly Recommend To Add-On ). This Will Enable You To Monitor The Status And Productivity Of Your Panels On The Go..
ăMultiple Battery Adaptationă Deep Cycle Sealed (Agm), Gel, Flooded And Lithium Battery Option Ready..
ăSmart 4-Stage Pwm ChargingăSmart 4-Stage Pwm Charging (Bulk, Boost, Float, And Equalization) Increases Battery Life And Improves System Performance. Intelligent Protection Against Reverse Polarity, Overcharging, Short-Circuit, And Reverse Current..
Features
- Optimized for 12V Batteries Compatible with 12V battery banks on the market, including lithium batteries. The LED indicators allow you to set battery types and check the charging staus with ease.
- Smart 4-Stage PWM Charging Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
- Compact in size Which makes it easy to install virtually anywhere.
- Multiple battery adaptation Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
- Wanderer10A|30A Installation Notes The default starting position of the Wanderer controller terminal hatches are closed (in the UP position) that could mistakenly look like an open wire hatch. Make sure to FIRST lower each terminal hatch by screwing the terminals counterclockwise (CCW) to expose the wire terminal hatch to the open position. THEN secure each cable by rotating the screws clockwise (CW) to the closed position.
- Remote Monitoring The RS232 communication port allows the Renogy Rover charge controller to communicate with the DC Home app and Renogy ONE M1 via the Renogy BT-1 Bluetooth module (highly recommend to add-on ). This will enable you to monitor the status and productivity of your panels on the go.
- See more on Amazon...
First Available: 02/28/2021
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.76 x 6.45 x 4.31 Inches | Weight: 0.30 pounds
Warranty: 1-year material and workmanship warranty
See On Amazon #2
[Upgraded] 30A Solar Charge Controller, Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display (30a)
Asin: B08L8TBCK6 | Ean: 0713484981214 | UPC: 713484981214
Please Note: The Charge Regulator Is Only Suitable For Lead-Acid Batteries: Open, Agm, Gel. Do Not Support Any Other Batteries. The Solar Controller Will Turn Off Automatically To Protect The Lifespan Of Your Battery If The Voltage Of The Battery Drop Below 8V..
Warranty: 12-Month Warranty And Lifetime Technique Support. If There Is Any Problem, Please Contact Us Through Amazon Email, We Will Arrange A Refund Or A Replacement..
Lcd Display: Let You Know The Status And Data With Lcd Display. You Can Also Switch Modes And Parameter Configuration Conveniently And Can Use This Controller In A Different Place Like Home, Industrial, Commercial, Etc..
Safe To Use: Equipped With Overcurrent Protection, Short-Circuit Protection, Inverse Connection Protection, Low Voltage, And Overcharge Protection, And Have Fully 3-Stage Pwm Charge Management. This 30A Solar Charge Controller Will Help You Improve The System Efficiency Safely And Prolong The Life Span Of The Battery..
Features
- UPGRADED SOLAR PANEL CONTROLLER: Compatible with 12V 24V system.This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).
- SAFE TO USE: Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection, and have fully 3-stage PWM charge management. This 30A solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
- PLEASE NOTE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.
- LCD DISPLAY: Let you know the status and data with LCD Display. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, industrial, commercial, etc.
- WARRANTY: 12-month warranty and lifetime technique support. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement.
- See more on Amazon...
Brand: Depvko | Manufacturer: Depvko
Dimensions: 1.30 x 5.28 x 2.80 inches
See On Amazon #3
Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/ LCD Display for AGM, Gel, Flooded and Lithium Battery, Used in RVs, Trailers, Boats, Yachts, Voyager 20A
Asin: B07YXZMKD2 | Model: Voyager 20A PWM | PartNumber: Voyager 20A PWM | Ean: 0810009713517 | UPC: 810009713517
Multiple Protections: The Voyager Controller Has Multiple Intelligent Protections Against Reverse Polarity, Over Charge, Short-Circuit, Reverse Current, Overload, And Over Discharge, Keeping Your Battery Fully Protected..
Backlit Lcd Displaying System: The Voyager Comes With An Lcd Display Showing Accurate And Timely Information Including Charging Current, Generated Energy, Temperature, Battery Voltage, And Error Codes That Allows Users To Monitor And Control Charging..
Support Multiple Battery Types: The Voyager Controller Can Automatically Sense 12V Or 24V System Voltage When Paired With A Gel, Agm, Or Flooded Batteries. It Also Comes With A Lithium Activation Feature..
Ip67 Rated Waterproof: With An Ip67 Rated Waterproof Design, The Voyager Controller Is Suitable For Outdoor Use And Will Remain Fully Operational When Exposed To Water Spray, Rain, Or Condensation..
Features
- 4-STAGE PWM Technology: The Voyager controller is equipped with advanced smart PWM technology with high charging efficiency. It provides 4-stage charging (Bulk, Absorption, Float and Equalization) in order to protect the battery.
- IP67 Rated Waterproof: With an IP67 rated waterproof design, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, rain, or condensation.
- Multiple Protections: The Voyager controller has multiple intelligent protections against reverse polarity, over charge, short-circuit, reverse current, overload, and over discharge, keeping your battery fully protected.
- Support Multiple Battery Types: The Voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries. It also comes with a Lithium activation feature.
- Backlit LCD displaying system: The Voyager comes with an LCD display showing accurate and timely information including charging current, generated energy, temperature, battery voltage, and error codes that allows users to monitor and control charging.
- See more on Amazon...
First Available: 11/24/2020
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.40 x 6.08 x 3.83 Inches | Weight: 0.55 Pounds
Warranty: 2-year material and workmanship warranty
See On Amazon #4
Renogy 30A 12V/24V PWM Solar Charge Controller with LCD Display Flush Mount Design Negative Ground, Compatible with Sealed, Gel, Flooded and Lithium Batteries, Adventurer 30A,black
Asin: B07BBKFTNV | Model: Adventurer 30A Li 12V/24V | PartNumber: Adventurer 30A Li 12V/24V | Ean: 0816360026396 | UPC: 816360026396
ăFlush Mount DesignăDesigned To Cleanly Flush Mount On Walls, Providing A Sleek, Integrated Look. An Included Surface Mount Attachment Allows For Versatility In Mounting..
ăMultiple Battery Adaptationă Deep Cycle Sealed (Agm), Gel, Flooded And Lithium Battery Option Ready..
ăReal-Time MonitoringăThe Rs232 Port Can Work With The Bt-1 Bluetooth Module To Deliver Real-Time Energy Data Across The Dc Home Smart Phone App & Renogy One M1.
ăNegative GroundăThe Adventurer Is A Negative Ground Controller. This Ensure Compatibility With Any Negative Ground System, Which Is The Standard And Most Conventional Way Of Grounding. Any Negative Connection On The Solar Module, Battery And Load Can Be Safely Earth Grounded As Required..
ăSmart 4-Stage Pwm ChargingăSmart 4-Stage Pwm Charging (Bulk, Boost, Float, And Equalization) Increases Battery Life And Improves System Performance. Intelligent Protection Against Reverse Polarity, Overcharging, Short-Circuit, And Reverse Current..
Features
- 12V/24V Automatically Detect Automatically detects 12V or 24V DC system voltages (for non-lithium batteries). The LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
- Smart 4-Stage PWM Charging Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
- Flush Mount Design Designed to cleanly flush mount on walls, providing a sleek, integrated look. An included Surface Mount Attachment allows for versatility in mounting.
- Negative Ground The Adventurer is a negative ground controller. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Any negative connection on the solar module, battery and load can be safely earth grounded as required.
- Multiple Battery Adaptation Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
- Real-time Monitoring The RS232 port can work with the BT-1 Bluetooth module to deliver real-time energy data across the DC Home smart phone app & Renogy ONE M1
- See more on Amazon...
First Available: 02/22/2018
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.90 x 6.56 x 4.50 inches | Weight: 0.60 pounds
Warranty: NEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. âą Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. âą The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. âą Do NOT allow water to enter the controller.
See On Amazon #5
[Upgraded] 30A Solar Charge Controller 12V/ 24V Solar Panel Charge Controller Intelligent Regulator with Dual USB Port Auto Parameter LCD Display and Timer Setting ON/Off Hours
Asin: B09LLMK7PD | Model: R000079 | PartNumber: R000079 | Ean: 0761594900007 | UPC: 761594900007
3-Stage Pwm Control Charging: Fully 3-Stage Pwm Regulation Charging Using Direct Charge, Lifting Charge, Floating Charge Three-Stage Pwm Regulation Charging Mode. Using The Controller To Realize Efficient And Fast Intelligent Charging, And Effectively Prolong The Service Life Of The Battery..
Confidence Service: Our Brand Werchtay Team Has Complete After-Sales Service, And The Product Comes With An Instruction Manual. If You Encounter Problems, Please Contact Our Team. We Provide One-Year Warranty And Lifetime After-Sales Service..
Multiple Intelligent Protection: Built-In Overcurrent Protection, Short Circuit Protection, Reverse Connection Protection, Open Circuit Protection, All Automatic Recovery, No Damage To The Controller, A Reliable Protector For Your Devices. If The Battery Voltage Is Lower Than 8V, The Solar Controller Will Automatically Shut Down To Protect The Battery Life.
Functional Lcd Screen: Easy To Install And Operate, Intuitive Lcd Display That Can Clearly Indicate The Status And Data Is Able To Switch Modes And Parameter Configuration, The Level Of Complete Power-Off Is Adjustable, Which Can Perfectly Protect The Lithium Battery From Over-Discharge, Suitable For Home, Industrial, Commercial Etc..
Features
- SMART PWM TECHNOLOGY: The controller compatibility with 12V and 24V system, Discharge Current: 30A; dual USB output 5V / 2.5A, Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL. Controller mode: b1: lead-acid. b2: ternary lithium. b3: Lithium iron phosphate.
- FUNCTIONAL LCD SCREEN: Easy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc.
- 3-STAGE PWM CONTROL CHARGING: Fully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery.
- MULTIPLE INTELLIGENT PROTECTION: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices. If the battery voltage is lower than 8V, the solar controller will automatically shut down to protect the battery life
- CONFIDENCE SERVICE: Our brand WERCHTAY team has complete after-sales service, and the product comes with an instruction manual. If you encounter problems, please contact our team. We provide one-year warranty and lifetime after-sales service.
- See more on Amazon...
Brand: WERCHTAY | Manufacturer: WERCHTAY
Dimensions: 1.50 x 5.30 x 2.75 Inches
See On Amazon #6
Bateria Power 10A 12V MPPT Solar Charge Controller, Intelligent Solar Panel Regulator with LED and LCD Display, Compatible with Sealed Flooded Gel AGM Lithium LiFePO4 Battery
Asin: B0C9LZ4GSF | Model: sunrock 10M | PartNumber: sunrock 10M
ă100% Efficiently Mppt Chargingă: The Mppt Solar Charge Controller Adopts A New Generation Mppt (Maximum Power Point Tracking) Charging Technology, Which Can Maximize The Receiving Efficiency And Can Be 30% Higher Than The Traditional Pmw Charging Performance..
ăCompact & Portableă: Upgraded Design Brings A Smaller Size, Making The Solar Charger Controller More Compact And Portable. The Body Of The Controller Is 4.3X2 Inches With A Net Weight Of 137G. Compared With Other Controllers, This 10A Mppt Controller Will Save More Space When Install..
ăReal-Time Monitoringă: Equipped With An Lcd Display And Led Indicator Light, Which Brings Convenience For You To Monitor The Working Status Of The Solar Panel And Battery. Lcd Display Menu Can Be Switched Quickly By One Button..
ăFast & Safe Chargingă:The Solar Controller Utilizes A 3-Stage Charging (Equalize, Float, Boost) System To Optimize The Charging Performance And Protect The Battery. A Built-In Protection System Provides Multiple Protection(Over Charge Protection, Over Temperature Protection, Over Voltage Protection, Over Current Protection, Short Circuit Protection, Discharge Protection, Reserve Polarity Protection)..
ăPlug & Playă: The Solar Charge Controller Owns Solar Panel Female And Male Connectors, Which Allow Quickly Connect To The Solar Panel. The Upgraded Quality Sae Connector Provides Tighter Connection. Note: When You Connect The Solar Controller, You Need To Connect The Battery First, Then Connect Pv Panel. Max Solar Input Power: 150W.
Features
- 12V Solar Charge Controller : The solar controller is specially designed for 12 Volt battery. With one button for selection, you can select battery type easily when charging. Compatible with various 12V batteries such as AGM, Gel, Deep Cycle, Sealed, Lead Acid, Flooded, and LiFePO4 lithium Battery.
- Plug & Play : The Solar Charge Controller owns solar panel female and male connectors, which allow quickly connect to the solar panel. The upgraded quality SAE connector provides tighter connection. Note: When you connect the solar controller, you need to connect the battery first, then connect PV panel. Max Solar Input Power: 150W
- 100% Efficiently MPPT Charging : The MPPT Solar Charge Controller adopts a new generation MPPT (Maximum Power Point Tracking) charging technology, which can maximize the receiving efficiency and can be 30% higher than the traditional PMW charging performance.
- Fast & Safe Charging :The solar controller utilizes a 3-stage charging (Equalize, Float, Boost) system to optimize the charging performance and protect the battery. A built-in protection system provides multiple protection(Over Charge Protection, Over Temperature Protection, Over Voltage Protection, Over Current Protection, Short Circuit Protection, Discharge Protection, Reserve Polarity Protection).
- Compact & Portable : Upgraded design brings a smaller size, making the solar charger controller more compact and portable. The body of the controller is 4.3x2 inches with a net weight of 137g. Compared with other controllers, this 10A MPPT controller will save more space when install.
- Real-time Monitoring : Equipped with an LCD display and LED indicator light, which brings convenience for you to monitor the working status of the solar panel and battery. LCD display menu can be switched quickly by one button.
- See more on Amazon...
Brand: Bateria Power | Manufacturer: Bateria Power
Dimensions: 1.00 x 4.30 x 2.00 inches
See On Amazon #7
Renogy Rover 20A 12V/24V Auto DC Input MPPT Solar Charge Controller Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery, Rover 20A,black
Asin: B01MRWTAB5 | Model: Charge Controller | PartNumber: Charge Controller | Ean: 0816360024644 | UPC: 816360024644
ăFull System ProtectionăMeant To Safeguard Your System, The Self-Diagnostic Capability Can Assess And Protect Against Reverse Polarity, Battery Overcharging, Battery Over-Discharging, Overload, Short-Circuiting, And Reverse Current..
ăDiverse Load Controlă Connect Dc Appliances Directly To The Optional Load Terminals And Monitor Consumption Or Set Up Timer Controls Directly From The Controller.
ăRemote Monitoringă The Rs232 Communication Port Allows The Renogy Rover Charge Controller To Communicate With The Dc Home App And Renogy One M1 Via The Renogy Bt-1 Bluetooth Module (Highly Recommend To Add-On ). This Will Enable You To Monitor The Status And Productivity Of Your Panels On The Go..
ă4-Stage Safely ChargingăFeatures 4-Stage Charging (Bulk, Absorption, Float, And Equalization) Of Lead Acid Batteries And 2-Stage Charging (Bulk And Absorption) For Lithiuim Batteries As Well As Lithium Reactivation.
ă12V/24V Automatically DetectăAutomatically Detects 12V Or 24V Dc System Voltages (For Non-Lithium Battery Types), And The Lcd Screen And Multiple Led Indicators Display The Solar Charging And Battery Operation Information, Customizable Parameters, And Error Codes..
Features
- Innovative MPPT Design Die-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%. It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.
- 12V/24V Automatically Detect Automatically detects 12V or 24V DC system voltages (for Non-Lithium battery types), and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
- Full System Protection Meant to safeguard your system, the self-diagnostic capability can assess and protect against reverse polarity, battery overcharging, battery over-discharging, overload, short-circuiting, and reverse current.
- 4-Stage Safely Charging Features 4-stage charging (Bulk, Absorption, Float, and Equalization) of Lead Acid Batteries and 2-stage charging (Bulk and Absorption) for Lithiuim batteries as well as Lithium Reactivation
- Diverse Load Control Connect DC appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller
- Remote Monitoring The RS232 communication port allows the Renogy Rover charge controller to communicate with the DC Home app and Renogy ONE M1 via the Renogy BT-1 Bluetooth module (highly recommend to add-on ). This will enable you to monitor the status and productivity of your panels on the go.
- See more on Amazon...
First Available: 04/05/2018
Brand: Renogy | Manufacturer: Renogy
Dimensions: 2.34 x 5.94 x 8.27 inches | Weight: 1.50 Pounds
Warranty: 2-year material warranty
See On Amazon #8
Intelligent 10A MPPT Solar Charge Controller, Digital LCD Display + Temp Sensor, 10 Amp 12 Volt Solar Panel Regulator with MC4 Connector, Perfect for 12V AGM, Gel, Flooded, Lead-Acid, Lithium Battery
Asin: B09W61YHH9 | Model: MPPT Bare Wire Open End | PartNumber: MPPT Bare Wire Open End
ă Works With Multiple Batteries ă Compatible With Variety Of 12 Volt Batteries Of Agm, Gel, Deep Cycle, Sealed, Lead-Acid, Flooded And Lifepo4 Lithium Battery. 3 Stages Smart Charging: Boost, Float, And Equalization To Get The Maximum Use Of Solar Energy. Great For Deep Cycle, Starter, Marine, Car, Powersport And More..
ă Bare Wire Open End Connector ă Bare Wire Open End Plug And 2 Set Wire Quick Connector Included Makes It Easy To Connect With Most Of The Solar Panels And Batteries In The Market..
ă Visual Monitor & No Power Consumpation ă Equipped With Digital Lcd Display To Visual Monitor The Working Conditions Of Solar Panels And Battery. Powered Directly By Sunlight, Not Drain From Your Battery ! Please Expose The Solar Panel To The Full Sun And Ensure There Is No Shadow Or Overcast To Get Sufficient Sunlight To Start The Charge Controller..
ă Temperature Compensation ăAn Integrated Thermal Temp Sensor Eliminates Over-Charging In Hot Climates And Under-Charging In Cold Climates. Allowing High Efficient Charging To Your Batteries. Temp Compensation Specifications: -3Mv/â/2V.
ă Full Protections To Ensure Safety ă Built In Internal Protection System And Smart 3 Stages Charging To Safeguard Your Battery From Over-Charge, Over-Discharge, Over-Voltage, Over-Current, Over-Load, Short Circuit, Reverse Polarity And Over-Temperature, To Maximally Avoids The Damage Due To System Fault Or Installation Error And Ensure Your Battery To Efficiently And Safely Charged To 100%..
ă Compact & Portable ăImproved Over The Pwm Charge Controller, Allto Solar Mppt (Maximum Power Point Tracking) Charge Controller Bringing A New Generation To Maximizing Use Solar Power To Charge Your System, It Is 25% Smaller In Size But Captures As High As 15%-30% Performance To Charge The Battery With No Additional Self Power Consumption. High Tracking Efficiency Of Up To 95% While Pmw Charge Controller Is 65%-80%. Automatically Detect 12V Dc System Voltage..
Features
- MPPT CHARGE CONTROLLER + MC4 CONNECTOR This 10Amp MPPT solar charge controller has bare wire end and 2 set quick connectors enabling it to work with most of solar panels and batteries in the market.
- COMPACT & PORTABLE Improved over the PWM charge controller, Allto Solar MPPT (Maximum Power Point Tracking) charge controller bringing a new generation to maximizing use solar power to charge your system, it is 25% smaller in size but captures as high as 15%-30% performance to charge the battery with no additional self power consumption. High tracking efficiency of up to 95% while PMW charge controller is 65%-80%. Automatically detect 12V DC system voltage.
- WORKS WITH MULTIPLE BATTERIES Compatible with variety of 12 volt batteries of AGM, Gel, Deep Cycle, Sealed, Lead-acid, Flooded and LiFePO4 Lithium Battery. 3 stages smart charging: boost, float, and equalization to get the Maximum use of solar energy. Great for deep cycle, starter, marine, car, powersport and more.
- FULL PROTECTIONS TO ENSURE SAFETY Built in internal protection system and smart 3 stages charging to safeguard your battery from over-charge, over-discharge, over-voltage, over-current, over-load, short circuit, reverse polarity and over-temperature, to maximally avoids the damage due to system fault or installation error and ensure your battery to efficiently and safely charged to 100%.
- VISUAL MONITOR & NO POWER CONSUMPATION Equipped with digital LCD display to visual monitor the working conditions of solar panels and battery. Powered directly by sunlight, not drain from your battery ! Please expose the solar panel to the full sun and ensure there is no shadow or overcast to get sufficient sunlight to start the charge controller.
- TEMPERATURE COMPENSATION An integrated thermal temp sensor eliminates over-charging in hot climates and under-charging in cold climates. Allowing high efficient charging to your batteries. Temp compensation specifications: -3mV/ /2V
- BARE WIRE OPEN END CONNECTOR Bare wire open end plug and 2 set wire quick connector included makes it easy to connect with most of the solar panels and batteries in the market.
- See more on Amazon...
Brand: Allto Solar | Manufacturer: Allto Solar
Dimensions: 0.98 x 5.51 x 1.97 Inches
See On Amazon #9
[Upgraded]30A MPPT Solar Charge Controller, 12V 24V Dual USB Solar Panel Battery Intelligent Regulator with LCD Display, Auto Parameter Adjustable, Timer Setting, Multiple Load Control Modes
Asin: B0CKQYP866
Easy To Read And Adjustable: Easy To Read The Status And Data With An Lcd Display, Which Is Also Able To Switch Modes And Parameter Configuration, Such As Adjustment Of Battery Float, Reconnect, And Stop Discharge Voltage, Which Can Perfectly Protect The Lithium Battery From Over-Discharge, Suitable For Home, Industrial, Commercial, Etc.
Easy To Install And Operate: The Charge Controller Should Connect The Battery First, Then The Solar Panel, And Finally The Load. The Disassembly Sequence Is Contrary To The Wiring Order. Please Refer To The Manual For Details. We Offer A 12-Month Warranty For Quality-Related Issues And Lifetime Technique Support, Please Contact Us If Any Question.
Safe To Use: Built-In Overcurrent Protection, Short Circuit Protection, Reverse Connection Protection, Open Circuit Protection, All Automatic Recovery, No Damage To The Solar Controller, But A Reliable Protector For Your Devices.
Widely Compatibility In Battery: The 30A Solar Charge Controller Is Compatible With 12V Or 24V Systems Automatically, Suitable For Lead-Acid Batteries And Lithium Batteries, But If You Charge Lithium Batteries, You Must Set The Charging Parameters After Connecting To The Power. Dual Usb 5V/3A Output Ports Support Mobiles, Tablet Pcs, Or Other Devices Which Require 5V Voltage. Please Refer To The Manual For More Details.
Features
- UPGRADED MPPT TECHNOLOGY: Detecting the maximum charging current by innovative MPPT technology highly tracking efficiency up to 99%. This MPPT solar charge controller could increase efficiency by 10%-30% compared with ordinary solar charge controller
- WIDELY COMPATIBILITY IN BATTERY: The 30A solar charge controller is compatible with 12V or 24V systems automatically, suitable for lead-acid batteries and lithium batteries, but if you charge lithium batteries, you must set the charging parameters after connecting to the power. Dual USB 5V/3A output ports support mobiles, tablet PCs, or other devices which require 5V voltage. Please refer to the manual for more details
- EASY TO READ AND ADJUSTABLE: Easy to read the status and data with an LCD display, which is also able to switch modes and parameter configuration, such as adjustment of battery float, reconnect, and stop discharge voltage, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial, etc
- SAFE TO USE: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the solar controller, but a reliable protector for your devices
- EASY TO INSTALL AND OPERATE: The charge controller should connect the battery first, then the solar panel, and finally the load. The disassembly sequence is contrary to the wiring order. Please refer to the manual for details. We offer a 12-month warranty for quality-related issues and lifetime technique support, please contact us if any question
- See more on Amazon...
Brand: Rolokit | Manufacturer: Rolokit
See On Amazon #10
[Upgraded] 30A Solar Charge Controller, Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display (New)
Asin: B09799F9BQ | Ean: 0744252414177 | UPC: 744252414177
Please Note: The Charge Regulator Is Only Suitable For Lead-Acid Batteries: Open, Agm, Gel. Do Not Support Any Other Batteries. The Solar Controller Will Turn Off Automatically To Protect The Lifespan Of Your Battery If The Voltage Of The Battery Drop Below 8V..
Warranty: 12-Month Warranty And Lifetime Technique Support. If There Is Any Problem, Please Contact Us Through Amazon Email, We Will Arrange A Refund Or A Replacement..
Lcd Display: Let You Know The Status And Data With Lcd Display. You Can Also Switch Modes And Parameter Configuration Conveniently And Can Use This Controller In A Different Place Like Home, Industrial, Commercial, Etc..
Safe To Use: Equipped With Overcurrent Protection, Short-Circuit Protection, Inverse Connection Protection, Low Voltage, And Overcharge Protection, And Have Fully 3-Stage Pwm Charge Management. This 30A Solar Charge Controller Will Help You Improve The System Efficiency Safely And Prolong The Life Span Of The Battery..
Features
- UPGRADED SOLAR PANEL CONTROLLER: Compatible with 12V 24V system.This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).
- SAFE TO USE: Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection, and have fully 3-stage PWM charge management. This 30A solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
- PLEASE NOTE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.
- LCD DISPLAY: Let you know the status and data with LCD Display. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, industrial, commercial, etc.
- WARRANTY: 12-month warranty and lifetime technique support. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement.
- See more on Amazon...
Brand: Depvko | Manufacturer: Depvko
See On Amazon #11
BougeRV Li 30A PWM Solar Charge Controller 12V 24V, with Backlit Display, USB Port, Negative Ground Battery Intelligent Regulator for Solar Panels Compatible with LFP, AGM, SLD, FLA, for RV, Off-Gird
Asin: B0B1JBR813 | Model: 30A PWM Negative | PartNumber: 30A PWM Negative
Battery Compatibility And Maintenance: Compatible With Various 12V Or 24V Batteries, Such As Sld, Fld, Gel, Agm, Sla, Lifepo4, Ternary Lithium Battery And Lto Battery. Including The Ability To Program The Solar Charge Controller For Best Charging And Maintenance Of Various Battery Types. The Solar Panel Regulator Is Dependable To Be Your Battery Maintainer..
Neat And Safe Wiring: Come With 3 Pairs Of Spade Terminals, It Is Easy To Grip The Wires More Firmly And Make A Neat Wiring. Please Note That Turn The Screwdriver Counterclockwise First, In Order To Open Up The Wire Clamp Holes. Hook Up The Battery First, Positive Wire, Then Negative Wire. After That, Connect The Controller To The Solar Panel, Please Note That Do Not Disconnect The Battery When The Solar Panels Are Active..
Solar Panel Regulator: Max Pv Input Voltage 55 Volts, This Solar Panel Regulator Can Handle 4500 Watts Input For 12 Volts Battery System, 900 Watts Input For 24 Volts System..
Li Compatibility: Not Only Compatible With Traditional Battery, The Pwm Controller Also Has Clear And Special Icons For Various Lithium Batteries On The Lcd Screen, Such As Lfp For Lifepo4, Li For Ternary Lithium Battery, Lto For Lithium-Titanium-Oxide. With Setting To Li Battery Type, This Solar Charge Controller Also Has A Function To Jumpstart Your Lithium Battery In Case It Gets Overly Discharged. Don't Need To Buy A New Controller For The Upgraded Lithium-Ion Batteries..
Features
- EASY-READ BACKLIT DISPLAY: To check the PV status and the Battery status easily, the 10A solar panel regulator will cycle the PV input current and the battery voltage on the main interface with real-time value every 3 seconds. Larger size screen and 50% brightness in no operation, the solar charge controller is easy to read in dim light. Allows you to see exactly what the controller was doing and how much power is being drawn in from the panel(s).
- Li COMPATIBILITY: Not only compatible with traditional battery, the PWM controller also has clear and special icons for various Lithium batteries on the LCD screen, such as LFP for LiFePO4, Li for Ternary lithium battery, LTO for Lithium-Titanium-Oxide. With setting to Li battery type, this solar charge controller also has a function to jumpstart your lithium battery in case it gets overly discharged. Don't need to buy a new controller for the upgraded Lithium-ion batteries.
- BATTERY COMPATIBILITY AND MAINTENANCE: Compatible with various 12v or 24v batteries, such as SLD, FLD, GEL, AGM, SLA, LiFePO4, ternary lithium battery and LTO battery. Including the ability to program the solar charge controller for best charging and maintenance of various battery types. The solar panel regulator is dependable to be your battery maintainer.
- SOLAR PANEL REGULATOR: Max PV input voltage 55 volts, this solar panel regulator can handle 4500 watts input for 12 volts battery system, 900 watts input for 24 volts system.
- NEAT AND SAFE WIRING: Come with 3 pairs of spade terminals, it is easy to grip the wires more firmly and make a neat wiring. Please note that turn the screwdriver counterclockwise first, in order to open up the wire clamp holes. hook up the battery first, positive wire, then negative wire. After that, connect the controller to the solar panel, please note that do not disconnect the battery when the solar panels are active.
- See more on Amazon...
Brand: BougeRV | Manufacturer: BougeRV
Dimensions: 1.92 x 5.92 x 3.95 inches
Warranty: Manufacturer warranty for 18 months from date of purchase.
See On Amazon #12
EEEkit 100A Solar Charge Controller, 12V/24V Solar Panel Charge Controller Intelligent Regulator with 5V Dual USB Port Display Adjustable PWM Auto Parameter LCD Display and Timer Setting
Asin: B0BXKX7QWX | Model: H322910-E001845677FBA | PartNumber: H322910-E001845677FBA
Intelligent Design: Using 3 Stage Pwm Regulation Charging Mode: Direct Charge, Lifting Charge, Floating Charge. Build-In Industrial Microcontroller For Automatical Management, Memorizing Various Parameters Set By The User And The Data Won't Be Lost When The Battery Runs Out. The Solar Controller Will Turn Off Automatically Once The Voltage Is Too Low..
Easy To Use: The Charge Controller Should Connect The Battery First, Then The Solar Panel, And Finally The Load! You Can Change The Settings By The Simple One-Button Operation. Don't Worry Of The Unsatisfied Product You Received. We Offer A 30-Days Money-Back Guarantee And 12-Month Warranty For Quality-Related Issues..
Functional Lcd Display: Intuitive Lcd Display That Can Clearly Indicate The Status And Data Is Able To Switch Modes And Parameter Configuration, Suitable For Home, Industrial, Commercial, Etc..
Reliable Protection: Our Solar Charge Regulator Provides Over-Current Protection, Short-Circuit Protection, Inverse Connection Protection, Low Voltage And Overcharge Protection, A Reliable Protector For Your Devices..
Features
- WIDE COMPATIBILITY: The solar charger controller with 100A rated discharge current is compatible with 12V or 24V system automatically, suitable for lead-acid batteries: OPEN, AGM, GEL. Dual USB 5V/3A output ports support mobile phones, tablet PCs or other devices that require 5V voltage. Please read the manual carefully.
- RELIABLE PROTECTION: Our solar charge regulator provides over-current protection, short-circuit protection, inverse connection protection, low voltage and overcharge protection, a reliable protector for your devices.
- INTELLIGENT DESIGN: Using 3 stage PWM regulation charging mode: Direct charge, lifting charge, floating charge. Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. The solar controller will turn off automatically once the voltage is too low.
- FUNCTIONAL LCD DISPLAY: Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, industrial, commercial, etc.
- EASY TO USE: The charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation. Don't worry of the unsatisfied product you received. We offer a 30-days money-back guarantee and 12-month warranty for quality-related issues.
- See more on Amazon...
Brand: EEEKit | Manufacturer: EEEKit
See On Amazon #13
EPEVER MPPT Solar Charge Controller 40A 150V PV Solar Panel Controller Negative Ground W/ MT50 Remote Meter + Temperature Sensor PC Monitoring Cable[Tracer4215BN]
Asin: B07429RK43 | Model: Tracer4215BN-MT50 | PartNumber: Tracer4215BN-MT50 | Ean: 0615068180009 | UPC: 615068180009
Work With Lithium Batteries,Lifepo4(4S/8S),Li(Nicomn)O2 (3S/6S/7S) And All Lead Acid Batteries, Sealed Agm Gel And Flooded Battery, And User Mode.
This 40 Amp Mppt Solar Panel Charger Works With 600W Solar Panel On 12V Battery System And 1200W On 24V Battery. Max Solar Panel 1560W, Multiple Load Mode Allow You Set The Load On/Off In Different Situation. A Solid State Relay Is Recommended If You Are Using A Power Inverter.
Rs-485 Communication Bus Interface And Standard Modbus Interface Available To Meet Various Communication Requirements, Temperature Sensor And Pc Monitoring Cable Attached.
150V Max Pv Input Allow This Charge Controller Handles More Solar Panels Wiring In Series To Minimize Pv Current, 5 X 12V Solar Panel Connecting In Series Will Be Applicable.
Features
- Negative Grounding MPPT Solar Charge Controller Tracer4215BN, The Advanced MPPT Control Algorithm makes this 40 Amp MPPT Controller Tracking Efficiency higher than 99.5%
- 150V Max PV Input Allow this Charge Controller Handles More Solar Panels Wiring in Series to minimize PV current, 5 x 12V Solar Panel Connecting in Series will be applicable
- Work with Lithium batteries,LiFePO4(4S/8S),Li(NiCoMn)O2 (3S/6S/7S) and all Lead Acid Batteries, Sealed AGM GEL and Flooded Battery, and USER mode
- RS-485 communication bus interface and Standard MODBUS interface available to meet various communication requirements, Temperature Sensor and PC monitoring Cable Attached
- This 40 amp MPPT Solar Panel Charger works with 600W Solar Panel on 12V Battery System and 1200W on 24V Battery. Max Solar Panel 1560W, multiple load mode allow you set the load on/off in different situation. A Solid State Relay is recommended if you are using a Power Inverter
- See more on Amazon...
Brand: SolarEpic | Manufacturer: Epsolar
Dimensions: 2.52 x 11.93 x 7.20 inches | Weight: 0.08 pounds
Warranty: We offer 2 years limited warranty
See On Amazon #14
30A Solar Charge Controller 12V 24V, Bateria Power PWM Intelligent Plug and Play Portable Solar Regulator, LCD Display for Solar Panels Compatible with LFP AGM SLD FLA, for RV, Off-Gird (SunRock 30E)
Asin: B0CSJV161S
ăMini & Portable With Lcd Display & Led Indicate LightăThe Controller Is Equipped With An Lcd Screen And Led Indicator Light, Which Is Convenient For You To Monitor The Working Condition Of The Solar Panel And Battery. In Addition, This Controller Is Compact And Convenient In Appearance. Compared With Other Controllers, It Saves 30% Of The Space. It Is Also Very Convenient To Carry And Connect When Used Outdoors..
ăDsign For 12V And 24V BatteryăCompatible With Various 12V And 24V Batteries, Such As Sld, Fld, Gel, Agm, Sla, Lifepo4, Ternary Lithium Battery, And Lto Battery. Max Solar Input Power: 450W For 12V Battery; 900W For 24V Battery..
ăExcellent Waterproof PerformanceăThis Controller Has Good Waterproof Performance, So Even If You Use It Outdoors, You Don't Have To Worry About Inclement Weather Making It Unusable. (Reminder: To Prolong The Service Life, We Do Not Recommend Soaking The Controller In Water.).
ăHigh SecurityăThe Controller Has A Built-In Protection System And Intelligent 3-Stage Charging (Equalize, Float, Boost), Which Means That The Solar Energy Can Be Used To The Maximum Extent, And It Can Also Fully Protect Your Battery (Over Charge Protection, Over Temperature Protection, Over Voltage Protection, Over Current Protection, Short Circuit Protection, Discharge Protection, Reserve Polarity Protection), It Is Safer To Use..
ăPlug & PlayăAnderson Connector Quickly Connects Or Disconnects, Plug And Play, Convenient And Practical. No Additional Installation Is Required, Making Usage Simple. The Portable 30A Pwm Controller Can Be Adapted To All Your Portable Solar Panels And Is A Wonderful Choice For Rv Travel..
Features
- Notes to buyers Designed for 12V and 24V batteries, please don't connect to higher voltage batteries. The PV Voc needs to be higher than the battery voltage, the minimum is 15V, and the maximum should not exceed 25Voc for 12V BAt; and not exceed 55Voc for 24V BAt. Connection sequence: first connect the battery, then connect the solar panel.
- Plug & Play Anderson connector quickly connects or disconnects, plug and play, convenient and practical. No additional installation is required, making usage simple. The portable 30A PWM controller can be adapted to all your portable solar panels and is a wonderful choice for RV travel.
- Mini & Portable with LCD Display & LED Indicate Light The controller is equipped with an LCD Screen and LED indicator light, which is convenient for you to monitor the working condition of the solar panel and battery. In addition, this controller is compact and convenient in appearance. Compared with other controllers, it saves 30% of the space. It is also very convenient to carry and connect when used outdoors.
- High Security The controller has a built-in protection system and intelligent 3-stage charging (Equalize, Float, Boost), which means that the solar energy can be used to the maximum extent, and it can also fully protect your battery (Over Charge Protection, Over Temperature Protection, Over Voltage Protection, Over Current Protection, Short Circuit Protection, Discharge Protection, Reserve Polarity Protection), it is safer to use.
- Dsign for 12V and 24V Battery Compatible with various 12v and 24v batteries, such as SLD, FLD, GEL, AGM, SLA, LiFePO4, ternary lithium battery, and LTO battery. Max solar input power: 450W for 12V battery; 900W for 24V battery.
- Excellent Waterproof Performance This controller has good waterproof performance, so even if you use it outdoors, you don't have to worry about inclement weather making it unusable. (Reminder: To prolong the service life, we do not recommend soaking the controller in water.)
- See more on Amazon...
Brand: Bateria Power | Manufacturer: Bateria Power
See On Amazon #15
EEEKit MPPT 100A Solar Charge Controller, Upgraded Solar Panel 12V 24V Dual USB Intelligent Regulator, Adjustable Parameter Backlight LCD Display and Timer Setting, Multi-Function Protection
Asin: B098QH2DKS
Multi-Function Lcd Displays: This Controller Is 12V/24V Automatically Adapt,First Connect The Battery,Then Connect The Solar Panels,When You First Use It, Make Sure The Battery Has Enough Voltage,So That The Controller Can Recognize The Correct Battery Type. Note: If It Cannot Be Charged Or Show A Moon Symbol, Please Check The Panel Has Power Or Whether The Power Is Lower Than The Voltage Of The Battery. Please Read The Manual Carefully..
Easy To Install And Operate: The Charge Controller Should Connect The Battery First, Then The Solar Panel, And Finally The Load! The Disassembly Sequence Is Contrary To The Wiring Order.Dual Mosfet Reverse Current Protection, Low Heat Production. Charge Controller Not To Connect The Grounded To Make The Light Run. It Can Charge The Battery And Supply Power To The Load At The Same Time. We Offer A 30-Days Money-Back Guarantee And 12-Month Warranty For Quality-Related Issues..
Build-In Industrial Micro Controller: 16Ad Sampling Accuracy, Temperature Charging Current, Discharge Current Accurate Real-Time Display, Power Generation At A Glance. Automatically Manage The Working Of Solar Panel And Battery In Solar System To Support Charging. The Core Function Of The Controller Is To Prevent The Battery From Being Overcharged And Overdischarged. Please Read The Manual Carefully..
Multiple Intelligent Protection: Solar Controller Has Short-Circuit Protection, Open-Circuit Protection,Reverse Protection, Over-Load Protection. Fully 3-Stage Pwm Charge Management, Improve System Efficiency And Prolong The Life Span Of The Battery. For Protecting The Lifespan Of Your Battery, Once The Voltage Of The Battery Drop Below 8V, The Solar Controller Will Turn Off Automatically..
Features
- DUAL USB 100A MPPT SOLAR CHARGE CONTROLLER: Using innovative MPPT technology high tracking efficiency up to 99%; Please refer to the information if you are not familiar with Mppt technology: There are many kinds of MPPT technology, Our Solar Controller Mppt technology is to detect the maximum charging current, not the boost type or the automatic charging of the solar panel voltage.
- MULTIPLE INTELLIGENT PROTECTION: Solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
- MULTI-FUNCTION LCD DISPLAYS: This controller is 12V/24V automatically adapt,first connect the battery,then connect the solar panels,when you first use it, make sure the battery has enough voltage,so that the controller can recognize the correct battery type. Note: If it cannot be charged or show a moon symbol, please check the panel has power or whether the power is lower than the voltage of the battery. Please read the manual carefully.
- BUILD-IN INDUSTRIAL MICRO CONTROLLER: 16AD sampling accuracy, temperature Charging current, discharge current accurate real-time display, power generation at a glance. automatically manage the working of solar panel and battery in solar system to support charging. The core function of the controller is to prevent the battery from being overcharged and overdischarged. Please read the manual carefully.
- EASY TO INSTALL AND OPERATE: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. Charge controller not to connect the grounded to make the light run. It Can charge the battery and supply power to the load at the same time. We offer a 30-days money-back guarantee and 12-month warranty for quality-related issues.
- See more on Amazon...
Brand: EEEKit | Manufacturer: EEEKit
See On Amazon #16
SOLPERK 10A Solar Charge Controller Waterproof Solar Panel Controller 12V/24V PWM Solar Panel Battery Intelligent Regulator for RV Boat car with LED Display
Asin: B0946MWYPK
âïžăIndicator MonitoringăYou Can Understand Its Current Working Status Through The Three Indicators On The Solar Panel Charge Controller. Load Normal Output: Green Light Is Always On; Battery Is Normal: Green Light Is Always On; Solar Panel Is Charging Normally: Red Light Is Always On..
âïžăWhat You Getă1 Solar Charger Controller, 1 Manual. Extended 12 Months Warranty And Our 7*24H Technical Service Support. If You Have Any Questions, Please Contact Us Directly..
âïžăEasy To Install And OperateăThe Solar Panel Controller Adopts Sae Port, Plug And Play. A Manual With Clear Connection Steps Is Included. There Are 2 Pre-Drilled Holes On The Controller, You Can Install It Anywhere According To Your Needs!.
âïžăIntelligent ProtectionăIntelligent 3-Stage Pmw Charging Improves Charging Efficiency. The Solar Controller Not Only Extends Battery Life And Improves System Performance, But Also Has Multiple Protection Functions: Battery Under-Voltage, Over-Voltage, Output Overload, Short Circuit, Battery, Solar Panel Anti-Back Connect Protection..
Features
- Waterproof Solar Charge Controller IP67 waterproof, suitable for outdoor use. Automatically identify voltage, 12V Max power: 150W, 24V Max power: 300W. The maximum current is 10A. Compatible with various 12V/24V deep-cycle batteries, such as AGM, GEL, Flooded. Adopting brand MCU chips to realize fast intelligent control and ultra-low standby power consumption.
- Intelligent protection Intelligent 3-stage PMW charging improves charging efficiency. The solar controller not only extends battery life and improves system performance, but also has multiple protection functions: Battery under-voltage, over-voltage, output overload, short circuit, battery, solar panel anti-back connect protection.
- Indicator Monitoring You can understand its current working status through the three indicators on the solar panel charge controller. Load normal output: green light is always on; battery is normal: green light is always on; solar panel is charging normally: red light is always on.
- Easy to install and operate The solar panel controller adopts SAE port, plug and play. A manual with clear connection steps is included. There are 2 pre-drilled holes on the controller, you can install it anywhere according to your needs!
- What You Get 1 solar charger controller, 1 manual. Extended 12 months warranty and our 7*24h technical service support. If you have any questions, please contact us directly.
- See more on Amazon...
Brand: SOLPERK | Manufacturer: SOLPERK
See On Amazon #17
SUNER POWER Waterproof 10A Solar Charge Controller - Intelligent 12V/24V Solar Panel Battery Regulator
Asin: B08JLHSJRG | Model: SPC-10A-Pro | PartNumber: SPC-10A-Pro
Photocell Control & Work Time Setting According To Personal Requirements, Practical And Useful..
Extended 12 Months Warranty + 24/7 Professional Lifetime Technical Support..
Ip65 Waterproof Design, Compatible With Suner Power 20W/30W Solar Panel Kits And Other Brands Solar Panels With Stander Sae Connector..
Overcharge Protection, Over-Discharge Protection, Overload Protection, Reverse Protection..
Features
- Optimized 3-stages charging algorithm helps the battery to get charged more effectively.
- Overcharge protection, over-discharge protection, overload protection, reverse protection.
- Photocell Control & Work time setting according to personal requirements, practical and useful.
- IP65 Waterproof design, compatible with SUNER POWER 20W/30W Solar Panel Kits and other brands solar panels with stander SAE connector.
- Extended 12 months warranty + 24/7 professional lifetime technical support.
- See more on Amazon...
Brand: SUNER POWER | Manufacturer: SUNER POWER
Dimensions: 0.80 x 3.18 x 1.97 inches
See On Amazon #18
10Amp MPPT Solar Charge Controller 12/24-Volt Intelligent Charge Controllers for Solar Panels, Solar Controller with LED Indicate for Gel AGM Lead-Acid, LiFePO4, Lithium Batteries
Asin: B0CQLRHLWF | Ean: 0791126497460 | UPC: 791126497460
đăCompact & Portable ăImproved Over The Pwm Charge Controller, Solar Mppt (Maximum Power Point Tracking) Charge Controller Bringing A New Generation To Maximizing Use Solar Power To Charge Your System, It Is 25% Smaller In Size But Captures As High As 15%-30% Performance To Charge The Battery With No Additional Self Power Consumption. High Tracking Efficiency Of Up To 98% While Pmw Charge Controller Is 65%-80%. Automatically Detect 12V/24V Dc System Voltage..
đ Solar Charge Controller Mppt Solar Charge Controller Solar Controller Mppt Dc To Dc Charger Mppt Solar Charge Controller 12V Mppt Charge Controller Solar Panel Controller Solar Panel Charge Controller Charge Controllers For Solar Panels Charge Controller 12V.
đăHigh SecurityăThe Controller Has A Built-In Protection System And Intelligent 3-Stage Charging (Equalize, Float, Boost), Which Means That The Solar Energy Can Be Used To The Maximum Extent, And It Can Also Fully Protect Your Battery (Over Charge Protection, Over Temperature Protection, Over Voltage Protection, Over Current Protection, Short Circuit.
đăSae Quick ConnectorăSae Quick Connector Disconnect Plug Sae Plug And Play, Convenient And Practical. At The Same Time, The Package Contains Two Additional Sae Extension Cables, Which Can Be Extended Or Diy Your Solar System..
đăDsign For 12V /24V BatteryăThis Controller Is Specially Designed For 12V/24V Battery, Compatible With Various 12V/24V Batteries Such As Agm, Gel, Deep Cycle, Sealed, Lead Acid, Flooded, And Lifepo4 Lithium Batteries..
đăCompact & Portable ăImproved Over The Pwm Charge Controller, Solar Mppt (Maximum Power Point Tracking) Charge Controller Bringing A New Generation To Maximizing Use Solar Power To Charge Your System, It Is 25% Smaller In Size But Captures As High As 15%-30% Performance To Charge The Battery With No Additional Self Power Consumption. High Tracking Efficiency Of Up To 98% While Pmw Charge Controller Is 65%-80%. Automatically Detect 12V/24V Dc System Voltage..
Features
- 100%MPPT Charging 10A MPPT solar charge controller can automatically monitor the 12V/24V DC system voltage, and the tracking efficiency is up to 98%, which means it can charge your battery to the maximum, compared with other products, Can help you save 20% of the charging time
- COMPACT & PORTABLE Improved over the PWM charge controller, Solar MPPT (Maximum Power Point Tracking) charge controller bringing a new generation to maximizing use solar power to charge your system, it is 25% smaller in size but captures as high as 15%-30% performance to charge the battery with no additional self power consumption. High tracking efficiency of up to 98% while PMW charge controller is 65%-80%. Automatically detect 12V/24V DC system voltage.
- COMPACT & PORTABLE Improved over the PWM charge controller, Solar MPPT (Maximum Power Point Tracking) charge controller bringing a new generation to maximizing use solar power to charge your system, it is 25% smaller in size but captures as high as 15%-30% performance to charge the battery with no additional self power consumption. High tracking efficiency of up to 98% while PMW charge controller is 65%-80%. Automatically detect 12V/24V DC system voltage.
- Dsign for 12V /24V Battery This controller is specially designed for 12V/24V battery, compatible with various 12V/24V batteries such as AGM, Gel, Deep Cycle, Sealed, Lead Acid, Flooded, and LiFePO4 lithium batteries.
- High Security The controller has a built-in protection system and intelligent 3-stage charging (Equalize, Float, Boost), which means that the solar energy can be used to the maximum extent, and it can also fully protect your battery (Over Charge Protection, Over Temperature Protection, Over Voltage Protection, Over Current Protection, Short Circuit
- SAE Quick Connector SAE Quick Connector Disconnect Plug SAE plug and play, convenient and practical. At the same time, the package contains two additional SAE Extension cables, which can be extended or DIY your solar system.
- Solar charge controller mppt solar charge controller solar controller mppt dc to dc charger mppt solar charge controller 12v mppt charge controller solar panel controller solar panel charge controller charge controllers for solar panels charge controller 12v
- See more on Amazon...
Brand: PolyEnergy | Manufacturer: PolyEnergy
Dimensions: 0.98 x 3.86 x 2.17 Inches
See On Amazon #19
30A Solar Charge Controller 12V/ 24V Solar Panel Charge Controller Intelligent Regulator with 5V Dual USB Port Display Adjustable Parameter LCD Display and Timer Setting ON/Off Hours (1)
Asin: B0B7RC9HNC | Ean: 0701715473164 | UPC: 701715473164
Built-In Overcurrent Protection, Short Circuit Protection, Reverse Connection Protection, Open Circuit Protection, All Automatic Recovery, No Damage To The Controller, A Reliable Protector For Your Devices..
Easy To Install And Operate, Intuitive Lcd Display That Can Clearly Indicate The Status And Data Is Able To Switch Modes And Parameter Configuration, The Level Of Complete Power-Off Is Adjustable, Which Can Perfectly Protect The Lithium Battery From Over-Discharge, Suitable For Home, Industrial, Commercial Etc..
30A Solar Charge Controller 12V/ 24V Solar Panel Charge Controller Intelligent Regulator With 5V Dual Usb Port Display Adjustable Parameter Lcd Display And Timer Setting On/Off Hours.
Fully 3-Stage Pwm Regulation Charging Using Direct Charge, Lifting Charge, Floating Charge Three-Stage Pwm Regulation Charging Mode. Using The Controller To Realize Efficient And Fast Intelligent Charging, And Effectively Prolong The Service Life Of The Battery..
Features
- 30A SOLAR CHARGE CONTRALLER compatibility with 12V and 24V system, Discharge Current: 30A; dual USB output 5V / 2.5A, Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL.
- Fully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery.
- Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices.
- 30A Solar Charge Controller 12V/ 24V Solar Panel Charge Controller Intelligent Regulator with 5V Dual USB Port Display Adjustable Parameter LCD Display and Timer Setting ON/Off Hours
- Easy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc.
- See more on Amazon...
Brand: D-FLIFE | Manufacturer: D-FLIFE
See On Amazon #20
SUNYIMA 100A MPPT Solar Charge Controller with LCD Display Dual USB Multiple Load Control Modes,New Mppt Technical Maximum Charging Current (100A)
Asin: B0B6G1PNLB | Model: MPPT 100A | PartNumber: MPPT 100A | Ean: 0782846135046 | UPC: 782846135046
ăReliable ProtectionăOvervoltage, Short Circuit, Overload, Overcharge, Over Discharge Protection Function; Automatic Focusing Mppt Tracking Charging, High Charging Efficiency, Non-Stop Detection During Charging, Bidirectional Focusing Tracking..
ăPlease AttentionăPls Note The Connection Ways,Connect The Battery First,Then Connect The Solar Panel(You Can't Reverse The Order).The Place That Don't Understand Pls Contact Us,ThanksïŒ.
ăIndustrial-Grade Master Chipă16Ad Sampling Accuracy, Temperature Charging Current, Discharge Current Accurate Real-Time Display, Power Generation At A Glance..
ăMulti-Function Lcd DisplaysăThis Controller Is 12V/24V 12V/24V Automatically Adapt,First Connect The Battery,Then Connect The Solar Panels,When You First Use It, Make Sure The Battery Has Enough Voltage,So That The Controller Can Recognize The Correct Battery Type..
Features
- Dual USB 100A MPPT Solar Charge Controller Using innovative MPPT technology high tracking efficiency up to 99%;Please refer to the information if you are not familiar with Mppt technology:There are many kinds of MPPT technology,Our Solar Controller Mppt technology is to detect the maximum charging current,not the boost type or the automatic charging of the solar panel voltage.
- Multi-function LCD Displays This controller is 12V/24V 12V/24V automatically adapt,first connect the battery,then connect the solar panels,when you first use it, make sure the battery has enough voltage,so that the controller can recognize the correct battery type.
- Reliable Protection Overvoltage, Short circuit, Overload, Overcharge, Over discharge protection function; Automatic focusing MPPT tracking charging, high charging efficiency, Non-stop detection during charging, bidirectional focusing tracking.
- Industrial-grade Master Chip 16AD sampling accuracy, temperature Charging current, discharge current accurate real-time display, power generation at a glance.
- Please Attention Pls note the connection ways,Connect the battery first,then connect the solar panel(You can't reverse the order).The place that don't understand pls contact us,Thanks
- See more on Amazon...
Brand: SUNYIMA | Manufacturer: SUNYIMA
See On Amazon ï»ż
Looking For Something Else?
Search