Dynofit 2-4" Lift Front Upper Control Arms for Chevy Silverado 2500HD/3500HD 2011-2019 with ball joint, Fit for GMC Sierra 2500HD/3500HD Suspension Leveling Lift Kits, 2 Pack(Red)
Asin: B0B9N9W664 | Model: control arm | PartNumber: control arm
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Safety & Stability】1) German Imported Steel - Inhibit Premature Wear And Enhanced; 2) Powder Coated Finishing - Offer Long Lasting Rust; 3) Polyurethane Bushing Instead Of Rubber Bushing, Higher Hardness Than Rubber, More Stable And Better For Extreme Climate; 4)The Ball Joint Made Of Thickened Cold-Drawn Steel Pipe Ensures Fatigue Life. 2.0 Upgrade Version Change For Oem Arm, Reduce The Stress And Angle Correct The Wandering And Diving Into Corner Issues..
【Brand Promise】2-Year Warranty With Worry-Free After-Sales Service. We Also Offer "30-Days Refund" Service, We Hope That Dynofit Can Make Your Shopping Experience Enjoyable. Feel Free To Contact Us If You Have Any Problems..
【Easy To Install】Includes Detailed, Step-By-Step Instructions & All Necessary Parts, The Control Arms Are Designed To Be A Direct-Fit Replacement For Easy Installation And Steering Alignment..
【Long Life】The Replacement Cycle On A Control Arm Can Vary From An Average Of 100,000 Miles All The Way Down To 30,000 Miles. Unlike Cheap Control Arms, Which Typically Last For 30,000 Miles Before They Must Be Replaced, The High-Performance Dynofit Upper Control Arms Can Go Up To 80,000 Miles Before Needing To Replace (Under Normal Driving Conditions)..
Features
- FITMENT Fit for 2011-2019 Chevrolet Silverado 2500HD/3500HD 2WD/4WD (only for 8 lugs); 2011-2019 Gmc Sierra 2500HD/3500HD 2WD/4WD (only for 8 lugs).
- LONG LIFE The replacement cycle on a control arm can vary from an average of 100,000 miles all the way down to 30,000 miles. Unlike cheap control arms, which typically last for 30,000 miles before they must be replaced, the high-performance Dynofit upper control arms can go up to 80,000 miles before needing to replace (under normal driving conditions).
- SAFETY & STABILITY 1) German Imported Steel - Inhibit premature wear and enhanced; 2) Powder Coated finishing - offer long lasting rust; 3) Polyurethane bushing instead of rubber bushing, higher hardness than rubber, more stable and better for extreme climate; 4)The ball joint made of thickened cold-drawn steel pipe ensures fatigue life. 2.0 Upgrade Version change for OEM arm, reduce the stress and angle correct the wandering and diving into corner issues.
- EASY TO INSTALL Includes detailed, step-by-step instructions & all necessary parts, the control arms are designed to be a direct-fit replacement for easy installation and steering alignment.
- BRAND PROMISE 2-year warranty with worry-free after-sales service. We also offer 30-DAYs REFUND service, We hope that dynofit can make your shopping experience enjoyable. Feel free to contact us if you have any problems.
- See more on Amazon...
Brand: dynofit | Manufacturer: dynofit
Warranty: Manufacturer Warranty For 12 Months
See On Amazon Similar To Dynofit 24 Lift Front Upper
#1
dynofit 2-4" Lift Upper Control Arms/A-arms/UCAS w/Ball Joint for 2007-2018 Silverado 1500, Sierra 1500, 07-18 Tahoe, Compatible with 2007-2018 Yukon/Yukon XL, Suburban 1500, Escalade
Asin: B07F43QHLQ | Model: 2930553 | PartNumber: 2930553 | Ean: 0661748968115 | UPC: 661748968115
【Heavy Duty Ball Joint】1) Heat-Treated Ball Joint Pins Coated With A Zinc-Nickel Alloy Cost More But Last Longer. Provides Strength And Allows Grease To Flow Through Bearing Surface For Reducing Friction And Providing Longer Life; 2) Dynofit Ball Joints Have A Greater Range Of Motion Than Stock Ball Joints For Perfect Chassis Alignment; 3) Greaseable Socket: Reduces Corrosion And Wear By Allowing New Lubricant To Flush Contaminants; 4) High Quality Dust Cover Of Ball Joint Keeps Dirt And Water Out Supply Longer Service Life..
【Easy To Install】Special Design For The Head Of Ball Joint Spindle Can Help You Install And Disassemble. Pre-Installed Dust Boot Shields Socket Components From Wear-Causing Contaminants. Includes Detailed, Step-By-Step Instructions & All Necessary Parts, The Control Arms Are Designed To Be A Direct-Fit Replacement For Easy Installation And Steering Alignment..
【High Quality Pu Bushing】Made Of New Upgrade Pu Which Handles Temperature Extremes Better Than Rubber. The Unique Groove Design And Specially Coated Axle Tubes Aid In Lubrication, Provide Better Handling And Reduce Noise..
【Brand Promise】Lifetime Warranty For Tubular Arms And Two Years Warranty For Ball Joints And Bushings. We Also Offer "30-Days Refund" Service, We Hope That Dynofit Can Make Your Shopping Experience Enjoyable. Feel Free To Contact Us If You Have Any Problems..
【Safety & Stability】1) 3.0 Upgrade Version Change For Oem Control Arm, Reduce The Stress And Angle Correct The Wandering And Diving Into Corner Issues, So It Will Reduce Rubbing. 2)Control Arms Constructed From 1.25" German Imported Dom Tubing For Superior Strength And Durability; 3)Powder Coated Finishing - Offer Long Lasting Rust; 4)Polyurethane Bushing For Control Arms Not Just For Great Drive Performance And Can Be Replaced So Easy, But Rubber Bushings Can Not Be Replaced, When It Broken, You Need Replace The Whole Upper Control Arms..
【Note】*Does Not Fit Stock Height Models; Does Not Fit 2007 "Classic" Models(Old Body Style); Does Not Fit Models With 3.5In Lifted Knuckle Kit; Does Not Fit Stock Wheel With 275Mm Or 285Mm Width Tires(If You Have Installed Wheel Spacers, Please Ignore It).
Features
- Fitment Compatible with 2007-2018 Silverado 1500 & 2007-2018 Sierra 1500, 2007-2018 Yukon 1500 & Yukon XL 1500, 2007-2018 Tahoe, 2007-2018 Suburban 1500, 2007-2013 Avalanche, 2007-2018 Cadillac Escalade
- Note *Does NOT fit stock height models; Does NOT fit 2007 Classic models(old body style); Does NOT fit models with 3.5in lifted knuckle kit; Does NOT fit stock wheel with 275mm or 285mm width tires(If you have installed wheel spacers, please ignore it)
- Heavy Duty Ball Joint 1) Heat-treated ball joint pins coated with a zinc-nickel alloy cost more but last longer. Provides strength and allows grease to flow through bearing surface for reducing friction and providing longer life; 2) Dynofit ball joints have a greater range of motion than stock ball joints for perfect chassis alignment; 3) Greaseable Socket: Reduces corrosion and wear by allowing new lubricant to flush contaminants; 4) High Quality Dust Cover of Ball Joint keeps dirt and water out supply longer service life.
- Safety & Stability 1) 3.0 Upgrade Version change for OEM control arm, reduce the stress and angle correct the wandering and diving into corner issues, so it will reduce rubbing. 2)Control arms constructed from 1.25 German Imported DOM tubing for superior strength and durability; 3)Powder Coated finishing - offer long lasting rust; 4)Polyurethane bushing for control arms not just for great drive performance and can be replaced so easy, but rubber bushings CAN NOT be replaced, when it broken, you need replace the whole upper control arms.
- High Quality PU Bushing Made of new upgrade PU which handles temperature extremes better than rubber. The unique groove design and specially coated axle tubes aid in lubrication, provide better handling and reduce noise.
- Brand Promise Lifetime warranty for tubular arms and two years warranty for ball joints and bushings. We also offer 30-DAYs REFUND service, We hope that dynofit can make your shopping experience enjoyable. Feel free to contact us if you have any problems.
- Easy to Install Special design for the head of ball joint spindle can help you install and disassemble. Pre-installed dust boot shields socket components from wear-causing contaminants. Includes detailed, step-by-step instructions & all necessary parts, the control arms are designed to be a direct-fit replacement for easy installation and steering alignment.
- See more on Amazon...
Brand: dynofit | Manufacturer: fastfree
Warranty: lifetime warranty for control arms and 1 year warranty for ball joints and bushings
See On Amazon #2
dynofit 2-4" Lift Upper Control Arms/A-arms/UCAS with Ball Joint Compatible with 1996-2003 Toyota Tacoma, 96-04 Prerunner, 95-02 4Runner, 2-4inch Raise Aftermarket Lift Front Tuner A-arms, 2Pcs
Asin: B0CHJ52KZV | Model: 1996-2003 Toyota Tacoma | PartNumber: 1996-2003 Toyota Tacoma
【Safety & Stability】1)New Upgrade Version Change For Oem Control Arm, Reduce The Stress And Angle Correct The Wandering And Diving Into Corner Issues, So It Will Reduce Rubbing. 2)Control Arms Constructed From 1.25" German Imported Dom Tubing For Superior Strength And Durability; 3)Powder Coated - Offer Long Lasting Rust; 4)Polyurethane Bushing For Control Arms Not Just For Great Drive Performance And Can Be Replaced So Easy, But Rubber Bushings Can Not Be Replaced, When It Broken, You Need Replace The Whole Upper Control Arms..
【Easy To Install】Special Design For The Head Of Ball Joint Spindle Can Help You Install And Disassemble. Pre-Installed Dust Boot Shields Socket Components From Wear-Causing Contaminants. Includes Detailed, Step-By-Step Instructions & All Necessary Parts, The Control Arms Are Designed To Be A Direct-Fit Replacement For Easy Installation And Steering Alignment..
【Brand Promise】Lifetime Warranty For Tubular Arms And 12-Month Warranty For Ball Joints And Bushings. We Also Offer "30-Days Refund" Service, We Hope That Dynofit Can Make Your Shopping Experience Enjoyable. Feel Free To Contact Us If You Have Any Problems..
【High Quality Pu Bushing】Made Of New Upgrade Pu Which Handles Temperature Extremes Better Than Rubber. The Unique Groove Design And Specially Coated Axle Tubes Aid In Lubrication, Provide Better Handling And Reduce Noise..
【Heavy Duty Ball Joint】1) Heat-Treated Ball Joint Pins Coated With A Zinc-Nickel Alloy Cost More But Last Longer. Provides Strength And Allows Grease To Flow Through Bearing Surface For Reducing Friction And Providing Longer Life; 2) Dynofit Ball Joints Have A Greater Range Of Motion Than Stock Ball Joints For Perfect Chassis Alignment; 3) Greaseable Zerk: Reduces Corrosion And Wear By Allowing New Lubricant To Flush Contaminants; 4) High Quality Dust Cover Of Ball Joint Keeps Dirt And Water Out Supply Longer Service Life..
Features
- FITMENT Compatible with 1996-2003 Toyot-a Tacoma 1st, 1996-2004 Prerunner, 1995-2002 4Runner 3rd N180. Lift the vehicle 2-4"
- Heavy Duty Ball Joint 1) Heat-treated ball joint pins coated with a zinc-nickel alloy cost more but last longer. Provides strength and allows grease to flow through bearing surface for reducing friction and providing longer life; 2) Dynofit ball joints have a greater range of motion than stock ball joints for perfect chassis alignment; 3) Greaseable Zerk: Reduces corrosion and wear by allowing new lubricant to flush contaminants; 4) High Quality Dust Cover of Ball Joint keeps dirt and water out supply longer service life.
- Safety & Stability 1)New Upgrade Version change for OEM control arm, reduce the stress and angle correct the wandering and diving into corner issues, so it will reduce rubbing. 2)Control arms constructed from 1.25 German Imported DOM tubing for superior strength and durability; 3)Powder Coated - offer long lasting rust; 4)Polyurethane bushing for control arms not just for great drive performance and can be replaced so easy, but rubber bushings CAN NOT be replaced, when it broken, you need replace the whole upper control arms.
- High Quality PU Bushing Made of new upgrade PU which handles temperature extremes better than rubber. The unique groove design and specially coated axle tubes aid in lubrication, provide better handling and reduce noise.
- Easy to Install Special design for the head of ball joint spindle can help you install and disassemble. Pre-installed dust boot shields socket components from wear-causing contaminants. Includes detailed, step-by-step instructions & all necessary parts, the control arms are designed to be a direct-fit replacement for easy installation and steering alignment.
- BRAND PROMISE Lifetime warranty for tubular arms and 12-month warranty for ball joints and bushings. We also offer 30-DAYs REFUND service, We hope that dynofit can make your shopping experience enjoyable. Feel free to contact us if you have any problems.
- See more on Amazon...
Brand: dynofit | Manufacturer: fastfree
Warranty: Manufacturer warranty for 2 years from date of purchase
See On Amazon #3
Dynofit Leveling Lift Kits and Upper Control Arms for 2007-2015 Chevy Silverado1500 Sierra 1500
Asin: B0CZP42PHR
【High Enough To Make Room For The Tires】Good Looking On Your Truck And Provide Enough Ground Balance. Make Your Ride Feel Even Than Before The Kit Was Installed With No Rough Or Bumpy You Will Feel Going Over Rugged Terrain..
【Original Brand Guarantee】2 Years Warranty And Feel Free Contact Us With Any Problem, Reply In 24 Hours, In Charge Of Any Quality And Installation Problems..
【Contents】2 X Upper Control Arms, 2 X Front Lift Spacers, 2 X Rear Lift Blocks, 4 X Extended U-Bolts With Pro Shock-Proof Box..
【Heavy Duty Ball Joint】1) Heat-Treated Ball Joint Pins Coated With A Zinc-Nickel Alloy Cost More But Last Longer. Provides Strength And Allows Grease To Flow Through Bearing Surface For Reducing Friction And Providing Longer Life; 2) Our Ball Joints Have A Greater Range Of Motion Than Stock Ball Joints For Perfect Chassis Alignment; 3) Greaseable Socket: Reduces Corrosion And Wear By Allowing New Lubricant To Flush Contaminants; 4) High Quality Dust Cover Of Ball Joint Keeps Dirt And Water Out..
Features
- Compatibility This lift kit and control arms are compatible with 2007-2018 Silverado 1500 & 2007-2018 Sierra 1500
- Heavy Duty Ball Joint 1) Heat-treated ball joint pins coated with a zinc-nickel alloy cost more but last longer. Provides strength and allows grease to flow through bearing surface for reducing friction and providing longer life; 2) Our ball joints have a greater range of motion than stock ball joints for perfect chassis alignment; 3) Greaseable Socket: Reduces corrosion and wear by allowing new lubricant to flush contaminants; 4) High Quality Dust Cover of Ball Joint keeps dirt and water out.
- High Enough to Make Room for the Tires Good looking on your truck and provide enough ground balance. Make your ride feel even than before the kit was installed with no rough or bumpy you will feel going over rugged terrain.
- Contents 2 x Upper Control Arms, 2 x Front Lift Spacers, 2 x Rear Lift Blocks, 4 x Extended U-bolts with Pro Shock-Proof box.
- Original Brand Guarantee 2 years warranty and feel free contact us with any problem, reply in 24 hours, in charge of any quality and installation problems.
- See more on Amazon...
Brand: dynofit
See On Amazon
Looking For Something Else?
Search