HeiyRC Landing Gear for DJI Mini 2/Mini 4k,Mavic Mini 1 SE Drone Foldable Leg Extensions Light Weight Height Extender Protector Guard Accessory
Asin: B0BBF9D5CV | Model: for Mini 1/2/SE | PartNumber: for Mini 1/2/SE | Ean: 0780854799946 | UPC: 780854799946
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Height Is Increased By About 0.7In(18Mm), And The Weight Is Only 0.3Oz(8.8 G), Which Has No Effect On The Flight Of The Drone. Will Not Interfere With Bottom Sensor Operation..
When The Landing Gear Is Folded, The Two Front Propellers Can Be Fixed In The Gap Between The Landing Gear And The Drone..
The Landing Gear Is Sturdy And Durable, Suitable For Taking Off On Grass, Sand, Mud, Etc., Protecting The Drone's Chassis, Camera And Propellers..
The Landing Gear Has Been Redesigned, Making It Easier To Remove And Install Without Damaging The Drone's Chassis. Portable Folding Design, After The Landing Gear Is Installed, The Arms Of The Drone Can Still Be Opened Or Folded Normally..
Features
- The super lightweight landing gear is suitable for DJI Mini 2/Mini 4k, Mavic Mini, Mini se drones. Effectively increase the height of the drone chassis and increase the safety during take-off and landing.
- The landing gear has been redesigned, making it easier to remove and install without damaging the drone's chassis. Portable folding design, after the landing gear is installed, the arms of the drone can still be opened or folded normally.
- The height is increased by about 0.7in(18mm), and the weight is only 0.3oz(8.8 g), which has no effect on the flight of the drone. Will not interfere with bottom sensor operation.
- The landing gear is sturdy and durable, suitable for taking off on grass, sand, mud, etc., protecting the drone's chassis, camera and propellers.
- When the landing gear is folded, the two front propellers can be fixed in the gap between the landing gear and the drone.
- See more on Amazon...
Brand: HeiyRC | Manufacturer: HeiyRC
Dimensions: 3.40 x 1.80 x 0.60 inches | Weight: 0.02 pounds
Warranty: 1 Year Warranty Against Manufacturer Defects
See On Amazon Similar To HeiyRC Landing Gear for DJI
#1
Landing Gear Extensions Risers Compatible with DJI Mavic AIR Landing Gear Legs Height Extender Hobby RC Aircraft Extending
Asin: B07FCKV9XP | Ean: 0781903098102 | UPC: 781903098102
Brand: PGYTECH | Manufacturer: PGYTECH
Dimensions: 0.98 x 5.00 x 3.39 Inches | Weight: 0.11 Pounds
See On Amazon #2
STARTRC Drone Landing Pad Pro, Universal Waterproof Portable Fast-Foldable Helipad for DJI Avata 2/Mini 4 Pro/Mavic 3 Pro/Mini 2 SE/Air 2S/Mini 3 Pro/Holy Stone/Avata/RC Quadcopters (22-inch/55cm)
Asin: B08VJ3LPRC
【Function & Portable】:22’’ X 22" (55X55cm) Size, Easy To Fold Allows You To Bring It Anywhere. Help Your Drone Find Home Position Easy, Strong Enough To Use On Sand , Overgrown Grass, Uneven Dirt Road Or In The Snow..
【Package & After-Sales】1X 22" Drone Landing Pad,1X Waterproof Storage Bag. If You Have Any Questions, Please Contact Us Via Amazon Email And Our Team Will Solve Your Problem Within 24 Hours..
【Premium Waterproof Material】:Startrc Landing Pad Is Made Of High-Quality Waterproof Pu Pvc Material With Lightweight And Stain-Resistant. It Only Takes A Bottle Of Water To Refresh The Landing Pad..
【Grey & Orange Design】:Double-Sided Color Design. Better Get Position Than Black; Easy To Fold And Store Quickly ; With A Waterproof Storage Bag For Easy Storage And Transport Outdoors..
Features
- Universal Drone Landing Pad :22"/55cm Foldable drone landing pad can provide the best take-off and landing surface in any environment for DJI Avata 2/Mini 4 Pro/Mavic 3 Pro/Mini 3 Pro/ Mavic Mini 2/ Air 2S/ FPV Drone/ Mavic 2 Pro/Zoom/ Mavic Pro/ Mavic Air/ Spark/ others drones.
- Grey & Orange Design :Double-sided color design. Better get position than black; Easy to fold and store quickly ; With a waterproof storage bag for easy storage and transport outdoors.
- Function & Portable :22 x 22 (55x55cm) size, easy to fold allows you to bring it anywhere. Help your drone find home position easy, strong enough to use on sand , overgrown grass, uneven dirt road or in the snow.
- Premium Waterproof Material :STARTRC Landing Pad is made of High-quality Waterproof PU PVC material with lightweight and stain-resistant. It only takes a bottle of water to refresh the landing pad.
- Package & After-Sales 1x 22 Drone Landing Pad,1x Waterproof Storage Bag. If you have any questions, please contact us via Amazon Email and our team will solve your problem within 24 hours.
- See more on Amazon...
Brand: STARTRC | Manufacturer: STARTRC
Dimensions: 0.08 x 21.65 x 21.65 inches | Weight: 1.01 pounds
See On Amazon #3
HeiyRC Landing Gear Extensions for DJI Mini 4K/Mini 2/Mini SE/Mavic Mini Drone Foldable Height Extended Leg Accessory
Asin: B09H2YLX5V | Model: CSG079 | PartNumber: CSG079 | Ean: 0709345832405 | UPC: 709345832405
【Safe & Stable】1.5Cm(0.59 Inches) Height Extended, Avoid Ground Debris Or Water Stains From Soiling Or Damaging The Drone Body, Gimbal And Propellers. Sled-Like Shape Makes Taking Off And Landing More Stable..
【Package Include】Foldable Landing Gear*1. If You Encounter Any Problems During The Purchase Or Use, Please Feel Free To Contract Us, And We Will Reply To Your Message Within 24 Hours..
【Detail Design & Quick Release】Hollow-Carved Design, Won't Block The Power Indicator,Bottom Sensor,Cooling Vents. Tailored Made, Easy To Install And Remove, Will Not Shake Or Fall Off During Flight..
【Foldable Landing Gear】Can Be Folded Into A Small Size, No Need To Disassemble, Does Not Affect The Folding Of The Drone Arms, Convenient To Carry And Store. Abs Material, Solid And Durable. Light Weight, Only 12.2G, Will Not Add Too Much Burden To Drone..
Features
- Compatibility Compatible with DJI Mini 4K / Mini 2 / DJI Mini 2 SE / Mini SE / Mavic Mini drone.
- Foldable Landing Gear Can be folded into a small size, no need to disassemble, does not affect the folding of the drone arms, convenient to carry and store. ABS material, solid and durable. Light weight, only 12.2g, will not add too much burden to drone.
- Safe & Stable 1.5cm(0.59 inches) height extended, avoid ground debris or water stains from soiling or damaging the drone body, gimbal and propellers. Sled-like shape makes taking off and landing more stable.
- Detail Design & Quick Release Hollow-carved design, won't block the power indicator,bottom sensor,cooling vents. Tailored made, easy to install and remove, will not shake or fall off during flight.
- Package Include Foldable landing gear*1. If you encounter any problems during the purchase or use, please feel free to contract us, and we will reply to your message within 24 hours.
- See more on Amazon...
Brand: HeiyRC | Manufacturer: HeiyRC
Dimensions: 3.15 x 11.81 x 11.81 inches | Weight: 0.03 Pounds
See On Amazon #4
STARTRC Drone Landing Pad, Double-Sided Colors Waterproof 20 inch Helipad for DJI Mini 4K/Mini 4 Pro/Avata 2/Air 3/Mini 2 SE/Mini 3 Pro/Mavic Air 2S/Avata/RC Drone Accessories
Asin: B09JC7M6KY | Model: 1110073 | PartNumber: 1110073
【Black & Orange Design】:Double-Sided Color Design. Black Side Stain-Resistant.Easy To Fold And Store Quickly ; With A Waterproof Storage Bag For Easy Storage And Transport Outdoors..
【What You Get】: 1 X Drone Landing Pad;4 X Ground Nails;1 X Helipad Bag..
【Premium Waterproof Material】:Startrc Drone Landing Pad Is Made Of High-Quality Waterproof Pu Material With Lightweight And Stain-Resistant..
【Function & Portable】:20’’ X 20" (50X50cm) Size. After Folding, The Size Only 6.4’’ X 6.4". You Can Put It In Your Genuine Dji Bag And Other Small Case.Easy To Fold Allows You To Bring It Anywhere..
Features
- Universal Drone Landing Pad :The latest version 20" Foldable drone landing pad can provide the best take-off and landing surface in any environment for DJI Mini 4 Pro/Avata 2//Air 3/Air 2S/ for DJI Mavic 3/ Mavic Mini 3 Pro/ FPV Drone/for DJI Avata and others drones.
- Function & Portable :20 x 20 (50x50cm) size. After folding, the size only 6.4 x 6.4. You can put it in your Genuine DJI bag and other small case.Easy to fold allows you to bring it anywhere.
- Black & Orange Design :Double-sided color design. Black Side stain-resistant.Easy to fold and store quickly ; With a waterproof storage bag for easy storage and transport outdoors.
- Premium Waterproof Material :STARTRC Drone Landing Pad is made of High-quality Waterproof PU material with lightweight and stain-resistant.
- What You Get : 1 x Drone Landing Pad;4 x Ground nails;1 x Helipad bag.
- See more on Amazon...
Brand: STARTRC | Manufacturer: STARTRC
See On Amazon #5
STARTRC Landing Gear for DJI Air 3 Leg Foldable Extended Kit for DJI Air 3 Fly More Combo Drone Accessories
Asin: B0CD1C91NP
【Foldable Design】Our Air 3 Landing Gear Features A Foldable And Quick-Release Design, Convenient To Carry And Easy To Install Or Disassemble. Easy To Install ,Won’T Damage Your Air 3 Drone..
【Package Includes】1X Landing Gear For Dji Air 3 (Only Landing Gear, Not Included Drone And Other Accessories!).
【Durable & Lightweight】This Landing Gear Is Made Of Durable Abs Material, Ultralight Designed, Not Add Extra Burden To The Air 3 Drone Flight, Stable Use For A Long Time Flight..
【Effective Protection】This Air 3 Landing Gear Can Effectively Increase The Distance Between The Drone Above The Dirt, Sand, Grass, Etc. When The Drone Takes Off Or Lands On Uneven Ground, It Can Reduce The Impact, Make The Drone Land Smoothly, And Protect For Dji Air 3 Body And Gimbal Camera To Prevent Damage..
Features
- Compatible The landing gear leg is specially designed for DJI Air 3 Pro, which is perfect for use and fits the air 3 drone perfectly.
- Effective Protection This Air 3 landing gear can effectively increase the distance between the drone above the dirt, sand, grass, etc. When the drone takes off or lands on uneven ground, it can reduce the impact, make the drone land smoothly, and protect for dji Air 3 body and gimbal camera to prevent damage.
- Foldable Design Our Air 3 landing gear features a foldable and quick-release design, convenient to carry and easy to install or disassemble. Easy to install ,won t damage your air 3 drone.
- Durable & Lightweight This landing gear is made of durable ABS material, Ultralight Designed, not add extra burden to the air 3 drone flight, stable use for a long time flight.
- Package includes 1x landing gear for dji air 3 (Only landing gear, Not Included Drone and other accessories!)
- See more on Amazon...
Brand: STARTRC | Manufacturer: STARTRC
Dimensions: 1.18 x 5.51 x 2.76 Inches | Weight: 0.07 Pounds
See On Amazon #6
BRDRC AIR 3 Payload Airdrop System,Transport Release with Landing Gear Wedding Ring Thrower Fishing Bait Clip Delivery for DJI Mavic AIR 3 Accessories
Asin: B0CHVRWYQV | Ean: 0739804146729 | UPC: 739804146729
Unlimited Operating Range - Directly Control The Airdrop With The Rc-N2 / Rc 2 Drone Remote Control Without The Limitations Of Remote Control Distance, Creating More New Possibilities. At Family Gatherings, Halloween, Christmas, Birthday Parties, You Can Drop Balloons, Flowers, Confetti, Candy, Party Favours, Drinks, Etc., Adding Unlimited Fun To Life..
Ultra Lightweight And Compact - The Air 3 Transport Dropper Weighs Approximately 2.68 Ounces (76 Grams) And Will Not Interfere With Normal Drone Transport Or Flight Speed..
Easy Installation - The Air 3 Dropping System Is One Piece, Eliminating The Need For Rubber Bands To Attach Additional Sensor Cables To The Bottom Of The Drone..
Landing Gear With Aerial Drop - The Landing Gear Has Been Raised By 1.3 Cm (0.51 Inches) To Effectively Prevent Ground Debris From Contaminating The Drone Or Damaging The Gimbal And Fuselage During Take-Off And Landing..
Features
- COMPATIBILITY - The airdrop system is compatible with the DJI AIR 3 drone with a maximum payload of 500g, a built-in battery capacity of 150mAh, a full charge in 1.5 hours and a full charge for 300 flights.
- Landing Gear with Aerial Drop - The landing gear has been raised by 1.3 cm (0.51 inches) to effectively prevent ground debris from contaminating the drone or damaging the gimbal and fuselage during take-off and landing.
- UNLIMITED OPERATING RANGE - Directly control the airdrop with the RC-N2 / RC 2 drone remote control without the limitations of remote control distance, creating more new possibilities. At family gatherings, Halloween, Christmas, birthday parties, you can drop balloons, flowers, confetti, candy, party favours, drinks, etc., adding unlimited fun to life.
- EASY INSTALLATION - The AIR 3 dropping system is one piece, eliminating the need for rubber bands to attach additional sensor cables to the bottom of the drone.
- ULTRA LIGHTWEIGHT AND COMPACT - The AIR 3 transport dropper weighs approximately 2.68 ounces (76 grams) and will not interfere with normal drone transport or flight speed.
- See more on Amazon...
Brand: BRDRC | Manufacturer: BRDRC
Dimensions: 3.60 x 3.80 x 1.30 inches | Weight: 0.17 pounds
See On Amazon #7
STARTRC Mini 3 Pro Landing Gear Leg Foldable Extended Kit for DJI Mini 3 Pro Accessories(Only for Mini 3 Pro)
Asin: B0B291VDDK
【Lightweight】The Weight Of The Whole Landing Gear Is Only 10G, And The Lightweight Design Will Not Add Extra Burden To The Mini 3 Pro's Flight..
【Anti-Loss Battery Protection】When The Mini 3 Pro Landing Gear Is In The Unfolded Working State, The Battery Can Be Stuck In Flight Without Any Accident. The Battery Can Be Replaced Without Removing The Landing Legs. Just Keep The Landing Legs Folded On The Drone..
【Package Includes】1X Landing Gear, 1X Instruction Manual, Only Includes Accessories, Excluding The Drone Equipment In The Picture..
【Foldable Design】This Landing Gear Features A Foldable And Quick-Release Design, Convenient To Carry And Easy To Install Or Disassemble..
【Effective Protection】This Mini 3 Pro Landing Gear Can Effectively Increase The Distance Between The Drone And The Ground By 21Mm. When The Mini 3 Pro Takes Off Or Lands On Uneven Ground, It Can Reduce The Impact, Make The Drone Land Smoothly, And Protect The Mini 3 Pro's Body And Gimbal Camera To Prevent Damage..
Features
- Compatible The landing gear leg is specially designed for DJI Mini 3 Pro, which is perfect for use.
- Effective Protection This Mini 3 Pro landing gear can effectively increase the distance between the drone and the ground by 21mm. When the Mini 3 Pro takes off or lands on uneven ground, it can reduce the impact, make the drone land smoothly, and protect the Mini 3 Pro's body and gimbal camera to prevent damage.
- Lightweight The weight of the whole landing gear is only 10g, and the lightweight design will not add extra burden to the Mini 3 Pro's flight.
- Foldable Design This landing gear features a foldable and quick-release design, convenient to carry and easy to install or disassemble.
- Anti-Loss Battery Protection When the Mini 3 Pro landing gear is in the unfolded working state, the battery can be stuck in flight without any accident. The battery can be replaced without removing the landing legs. Just keep the landing legs folded on the drone.
- Package includes 1x landing gear, 1x instruction manual, only includes accessories, excluding the drone equipment in the picture.
- See more on Amazon...
Brand: STARTRC | Manufacturer: STARTRC
Dimensions: 0.79 x 1.97 x 4.33 inches | Weight: 0.04 Pounds
See On Amazon #8
STARTRC Mini 2 SE Mini 4k Landing Gear Leg Foldable Extended Kit for DJI Mini 2 SE/Mini 4k/Mini 2/Mavic Mini Drone(Not Including Drone)
Asin: B084X53QHX | Model: Tomat | PartNumber: Tomat | Ean: 0709046973599 | UPC: 709046973599
Foldable Design, Compact And Easy To Carry. Lightweight Design Will Not Bring Too Much Burden To Your Mavic Mini 2 Se/Mini 2..
The Package Includes: 1*Mavic Mini 4K/Mini 2 Se/Mini 2/Mavic Mini Landing Gear (Not Including Mavic Mini 2 Se/Mini 2/Mavic Mini Drone)..
High-Strength Plastic Injection From The Complete Mold, Strong And Durable..
The Landing Gear Effectively Increases The Distance Between The Drone And The Ground By 15Mm To Prevent Damaging The Gimbal When The Drone Is Taking Off Or Landing..
Features
- The landing legs is specially designed for DJI Mini 4k/Mini 2 SE/Mini 2/ Mavic Mini drones.
- The landing gear effectively increases the distance between the drone and the ground by 15mm to prevent damaging the gimbal when the drone is taking off or landing.
- Foldable design, compact and easy to carry. Lightweight design will not bring too much burden to your Mavic Mini 2 SE/Mini 2.
- High-strength plastic injection from the complete mold, strong and durable.
- The package includes: 1*Mavic Mini 4k/Mini 2 SE/Mini 2/Mavic Mini landing gear (not including Mavic Mini 2 SE/Mini 2/Mavic Mini drone).
- See more on Amazon...
Brand: STARTRC | Manufacturer: STARTRC
Weight: 0.04 pounds
See On Amazon #9
HeiyRC Landing Gear for Ruko F11 PRO/F11 GIM2 Drone Foldable Extensions Quick Release Heightened Extended Leg Kit for Ruko F11 GIM/F11 Pro/Contixo F24 Pro/F35/Sjrc F11S Accessories
Asin: B09Z6X2FNM | Model: Contixo F35 Landing Gear | PartNumber: Contixo F35 Landing Gear | Ean: 0743645601736 | UPC: 743645601736
Weight: 0.94Oz, The Foldable Extended Leg Is Very Light To Help In The Battery Lasting..
Material: Plastic, Solid And Durable..
Quick Release,Easy To Install And Remove.Can Be Folded For Easy Storage.Sled-Like Shape Makes Taking Off And Landing More Safe..
Increases Drone Height By 1.14", Preventing The Drone From Damaging The Body, Gimbal And Propeller During Take-Off And Landing.When Your Drone In Longer Grass And Beach Work. Keeps The Drone Off The Sand And Away From The Grass Blades,Prevent These Blades Of Grass From Causing Motor Errors On Impact..
Features
- The height extender protector compatible with Ruko F11GIM2/Ruko F11GIM/Ruko F11 Pro/Contixo F24 Pro/F24 Pro Premium Pack/DEERC DE22/Sjrc F11S/Contixo 4K UHD/Contixo F35 drone(not compatible with Ruko Mini, U11S, F11 MINI, U11 PRO drone).
- Increases drone height by 1.14, preventing the drone from damaging the body, gimbal and propeller during take-off and landing.When your drone in longer grass and beach work. Keeps the drone off the sand and away from the grass blades,prevent these blades of grass from causing motor errors on impact.
- Weight: 0.94oz, The foldable extended leg is very light to help in the battery lasting.
- Quick Release,easy to install and remove.Can be folded for easy storage.Sled-like shape makes taking off and landing more safe.
- Material: plastic, solid and durable.
- See more on Amazon...
Brand: HeiyRC | Manufacturer: HeiyRC
Dimensions: 3.14 x 6.69 x 3.14 inches
Warranty: Lifetime Warranty Against Manufacturer'S Defects
See On Amazon #10
STARTRC Mini 3 Pro Landing Gear,Water Landing Gear Training Kit Floating Holder for DJI Mini 3 Pro Accessories
Asin: B0B7DM8KWK
【Effective Protection】The Water Landing Gear Can Also Be Used As A Landing Gear, Which Can Increase The Distance Between The Mini 3 Pro And The Ground By 45Mm, Effectively Improving The Ability Of The Mini 3 Pro To Adapt To The Ground Environment During Take-Off And Landing.It Can Avoid Damage To The Drone Due To Collision With The Ground During Take-Off Or Landing.
【Excellent Material】Made Of High-Quality Abs Material And Foam, It Has The Characteristics Of Durability And Strong Bearing Capacity, And The Lightweight Design Will Not Burden The Flight..
【Non-Destructive Installation】The Installation And Disassembly Are Simple, No Additional Tools Are Needed, And The Mini 3 Pro Will Not Be Damaged. First, Fix The Upper Bracket Above The Mini 3 Pro, And Fix The Lower Bracket Below The Mini 3 Pro, Then Align And Tighten With The Attached Screws, And Then Put The Buoyancy Rod Into The Lower Bracket And Adjust The Position.
【Water Landing】Use Water Landing Gear To Make Your Mini 3 Pro On The Water Landing Or Taking Off,Take A Video On The Water And Let You Have More Fun Flying (Before Using It On The Water, Make Sure Not To Go Where There Are Waves, Otherwise There Is A Danger Of Overturning.).
Features
- Applicable models This Water Landing Gear is suitable for DJI Mini 3 Pro
- Water Landing Use Water Landing Gear to make your Mini 3 Pro on the water Landing or taking off,Take a video on the water and let you have more fun flying (before using it on the water, make sure not to go where there are waves, otherwise there is a danger of overturning.)
- Effective protection The water landing gear can also be used as a landing gear, which can increase the distance between the Mini 3 Pro and the ground by 45mm, effectively improving the ability of the Mini 3 Pro to adapt to the ground environment during take-off and landing.It can avoid damage to the drone due to collision with the ground during take-off or landing
- Non-destructive installation The installation and disassembly are simple, no additional tools are needed, and the Mini 3 Pro will not be damaged. First, fix the upper bracket above the Mini 3 Pro, and fix the lower bracket below the Mini 3 Pro, then align and tighten with the attached screws, and then Put the buoyancy rod into the lower bracket and adjust the position
- Excellent material Made of high-quality ABS material and foam, it has the characteristics of durability and strong bearing capacity, and the lightweight design will not burden the flight.
- See more on Amazon...
Brand: STARTRC | Manufacturer: STARTRC
Dimensions: 5.12 x 9.45 x 1.57 inches | Weight: 0.11 pounds
See On Amazon
Looking For Something Else?
Search