Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2 Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool
Asin: B0BF52VGCN | Model: JMTT-001 | PartNumber: JMTT-001
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Work On Corroded & Frozen】Fully Machined Body And Screw, This Ferrule Puller Is Corrosion Resistant & Wear Resistant. Even Such As The Existing Supply Stops Are Severely Corroded Or Frozen, You Can Turn The Lever To Extract The Old Compression Sleeve From The Pipe..
【Great Compression Sleeve Puller Tool】We Love And Take Pride In Our Angle Stop Puller And We Back This Ferrule Blaster Up With Lifetime Service. Have The Confidence That This Compression Ring Removal Tool Will Last, If There Are Any Issues Of This Plumbing Tools, Just Contact Us And We Will Make It Right..
【Note】Please Note That This Compression Sleeve Puller Is For 1/2" Compression Fittings Only..
【Easy & Fast Remove】1.Remove The Old Compression Fitting Or The Old Angle Stop. 2.Put The Nut Of Pipe To The Golden Threaded Mouth Of The Puller Tool To Tighten The Screw 3.Make Sure The Ferrule Puller Is Properly Aligned With The Pipe, And Then You Are Able To Remove The Nut And Ferrule With Maybe 10 Turns Of The Handle. 4.The Puller Tool Will Automatically Pull Compression Nut And Ferrule..
【Not Need To Cut Off The Pipe】Saves A Lot Of Time Around Cutting Old Pipes. This Puller Tool Is Easy To Use In Relatively Tight Spots. Especially If You Don't Have Sufficient Exposed Copper To Cut Off The Old Compression Fitting, This Angle Stop Puller Will Effortlessly Remove The Old Compression Ring And Reform The Previously Crimped Copper Pipe Back To A Perfect Circle. No Damage To The Copper. Makes Removing A Nut And Ferrule Simple, And Makes Plumbing Work Simple..
Features
- No Damage To Walls & Copper & Supply Lines This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool.
- Not Need To Cut Off The Pipe Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple.
- Work On Corroded & Frozen Fully machined body and screw, this ferrule puller is corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.
- Easy & Fast Remove 1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.
- Great Compression Sleeve Puller Tool We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right.
- NOTE Please note that this compression sleeve puller is for 1/2 compression fittings only.
- See more on Amazon...
Brand: Debialo | Manufacturer: Debialo
See On Amazon Similar To Compression Sleeve Puller Tool Remove
#1
Orion Motor Tech Ball Joint Press Kit, Heavy Duty Ball Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
Asin: B01N7CO50E | Model: 0401RD | PartNumber: 0401RD
Universally Compatible With A Wide Range Of Vehicles - Fit Most American Domestic And Imported 2-Wheel Drive (2Wd) And 4-Wheel Drive (4Wd) Cars And Light Pickup Trucks That Have Press-Fit Type Ball Joints, Include 4-Wheel Drive (4Wd) Adapter That Allows Service For 1967 Thru Current 1/2 And 3/4 Ton 4Wd Vehicles Having The Dana 30 Or 44 Front Axle (Found On Ford, Gm, Dodge, Ihc And Jeep Vehicles)..
Orion Motor Tech - We Pursue Outstanding Quality And Professional Technical Support. If You Are Not Satisfied With This Product Or If You Have Any Question, Please Feel Free To Let Us Know..
Conveniently Organized In Custom Molded Case - Ball Joint Press / Bushing/ Removal Tool Kit Is Enclosed Inside A Heavy-Duty 11” X 3” X 15” Inch (27.9Cm X 7.6Cm X 38.1Cm) Plastic Blow-Molded Carrying Case With Handle For Easy Storage, Safe Storage, And Quick Organization. Package Include: 3X Receiving Tube, 1X Removal Adapter, 1X Installation Adapter, 1X Screw, 1X Install Cup Adapter, 1X Forcing-Screw Press, 1X Receiving Cup, 1X Installing Cup..
Professional Grade Quality And Durability - Off Road Weekend Warriors, Novices, And Professional Mechanics Trust The Orion Kit Because Orion Motor Tech Sources The Highest Quality Components From Around The World. Constructed From Heavy-Duty Forged Steel With Black-Oxide Finish On Adapters For Maximum Strength And Longevity That Resists Rust And Corrosion..
Features
- ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
- PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
- CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11 x 3 x 15 inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 3.54 x 13.98 x 11.91 inches | Weight: 15.87 pounds
Warranty: 1 year
See On Amazon #2
iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings
Asin: B09134F7GY | Model: CRQ01 | PartNumber: CRQ01
Compact Design With Wide Grip Handles. One-Handed Operation. Quick And Easy Disassembly.
The Disconnect Tool Depresses The Release Collar Using The Force Applied By Your Hand To Allow The Teeth Of The Fitting To Release And The Fitting To Be Removed, Reducing The Risk Of Installation Errors.
To Use The Disconnect Tong, Slide The Tong Over The Fitting And The Pipe. Squeeze The Tong To Press The Fittings Collar And Pull The Pipe From The Fitting. Easier To Use In Tight Situations.
Crq01 Disconnect Tong Is The Easiest Way To Disconnect Brass Push To Connect Fittings In Hard To Reach Places Where It Can Be Tough To Get Leverage On The Release Collar.
Features
- CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe
- CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar
- Compact design with wide grip handles. One-handed operation. Quick and easy disassembly
- To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations
- The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors
- See more on Amazon...
Brand: IWISS | Manufacturer: ZHEJIANG IWISS ELECTRIC CO.,LTD
See On Amazon #3
Lisle 56750 Seal Puller , black
Asin: B0002SRCKG | Model: 56750 | PartNumber: 56750 | Ean: 0830455675092, 0083045567509, 0971473155125 | UPC: 971473155125, 830455675092, 083045567509
Parts Can Be Challenging..
Country Of Origin: China.
Equipment Manufacturer (Oem) Part That Your Vehicle Came With..
Features
- Designed for oil and grease seals.Fit Type: Universal
- Equipment Manufacturer (OEM) part that your vehicle came with.
- parts can be challenging.
- Country of Origin: China
- See more on Amazon...
Brand: Lisle | Manufacturer: Lisle
Dimensions: 0.30 x 14.50 x 5.00 inches | Weight: 0.85 Pounds
Warranty: Limited Lifetime
See On Amazon #4
Kwik Tite & Angle-On Wrench Kit
Asin: B0019VQ0QC | Model: 4658 | PartNumber: 4658 | Ean: 0671451452801 | UPC: 671451452801
Brand: Pasco | Manufacturer: Pasco
Dimensions: 5.00 x 5.00 x 5.00 inches | Weight: 0.00 pounds
See On Amazon #5
Orion Motor Tech Gear Puller Set, 3" 4" 6" 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal, Heavy Duty Pulley Puller with Reversible Jaws 3 pcs Bearing Puller Tool Kit
Asin: B084SXLVK4 | Model: S00300 | PartNumber: S00300
3 Jaw Design: These Power Steering Pulley Pullers Bite Tightly Onto Your Components With Their Reinforced Jaws And Distribute Even Pulling Force To Remove Parts Without Causing Damage.
Tools For Mechanics: Drop-Forged And Heat-Treated Carbon Steel Builds With Corrosion Proof Coatings Ensure These Pullers Last For Resilient Service With Unrivaled Strength And Durability.
Reversible Jaws: Each Pulley Removal Tool Can Be Reversed To Pull Parts From Either The Inside Or Outside, With The 6" Gear Puller Provides 4 Configurations For A Sure Grip Thanks To Its Dual Fixing Holes.
Better Together: Our Bearing Puller Set Includes Three Puller Sizes, Offering Maximum Spreads Of 3", 4", And 6" And Reaches Of 4.3", 5", And 7.3" To Cover Most Applications.
Features
- UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts
- BETTER TOGETHER: Our bearing puller set includes three puller sizes, offering maximum spreads of 3, 4, and 6 and reaches of 4.3, 5, and 7.3 to cover most applications
- 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage
- REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes
- TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 3.00 x 8.00 x 8.00 inches | Weight: 5.00 pounds
Warranty: 1 year
See On Amazon #6
Olive Puller Not Damage The Pipe Olive Remover Ferrule Puller Corrosion-Resistant Compression Ring Removal Tool Suitable for Brass Pipes with Diameters of NPT 1/2" & NPT 3/4" Ferrule Removal Tool
Asin: B09L7X8Z7M | Model: Puller set-002 | PartNumber: Puller set-002 | Ean: 0785249091216 | UPC: 785249091216
【Abrasion-Resistant & Corrosion-Resistant Solid Brass】The Duoyi Ferrule Puller Is Made Of High-Quality Solid Brass,Which Not Only Has High Strength And High Hardness,But Also Has Good Wear And Corrosion Resistance. In Addition,The Olive Puller Has A Smooth Surface High,With High-Grade Texture,And Long Service Life,Can Provide You With Long-Term Service..
【Suitable For Various Tasks】Compression Ring Removal Tool Is Suitable For Various Tasks.It Can Increase Torque And Remove Olives More Easily.It Provides A Quick And Reliable Remedy For Removing Most Olives..
【Warm Reminder】The Threads On The Ferrule Puller Are Tapered Pipe Thread, Which Is Not Copatable For Straight Thread On Compression Fittings..
【Easy To Use】Olive Ring Removal Tool Is Easy To Operate,And You Can Work Without Reading The Manual Or With The Help Of Other Tools,Reducing Work Time And Energy..
【Suitable For Brass Pipes With Diameters Of Npt 1/2 Inch & Npt 3/4 Inches】The Olive Puller Can Work On Air-Conditioning Pipes,And Is Suitable For Brass Pipes With Diameters Of Npt 1/2 Inch & Npt 3/4 Inches..
Features
- Olive Puller That Will Not Damage The Pipe This DUOYI olive puller is an ideal tool for taking out olives.Without damaging the pipe,puller utilises the compression fitting locking nut to remove the olives which used or damaged from the copper piping.
- Suitable For Brass Pipes With Diameters Of NPT 1/2 Inch & NPT 3/4 Inches The olive puller can work on air-conditioning pipes,and is suitable for brass pipes with diameters of NPT 1/2 Inch & NPT 3/4 Inches.
- Abrasion-Resistant & Corrosion-Resistant Solid Brass The DUOYI ferrule puller is made of high-quality solid brass,which not only has high strength and high hardness,but also has good wear and corrosion resistance. In addition,the olive puller has a smooth surface High,with high-grade texture,and long service life,can provide you with long-term service.
- Easy To Use Olive ring removal tool is easy to operate,and you can work without reading the manual or with the help of other tools,reducing work time and energy.
- Suitable for various tasks Compression ring removal tool is suitable for various tasks.It can increase torque and remove olives more easily.It provides a quick and reliable remedy for removing most olives.
- Warm Reminder The threads on the ferrule puller are tapered pipe thread, which is not copatable for straight thread on compression fittings.
- See more on Amazon...
Brand: DUOYI | Manufacturer: DUOYI
Dimensions: 1.18 x 3.54 x 3.14 inches
See On Amazon #7
Compression Sleeve Puller Remove Tool Nut & Ferrule of Pipe 03943 - Sleeve Remover for 1/2-Inch Compression Fittings Only - Plumbing Tools Compression Ring Removal Tool Corroded & Frozen Supply Stops
Asin: B09Y884VNR | Model: M-03943 | PartNumber: M-03943 | Ean: 0605128925701 | UPC: 605128925701
Operating Steps--1.Remove The Old Compression Fitting Or The Old Angle Stop. 2.Put The Nut Of Pipe To The Golden Threaded Mouth Of The Puller Tool To Tighten The Screw 3.Make Sure The Ferrule Puller Is Properly Aligned With The Pipe, And Then You Are Able To Remove The Nut And Ferrule With Maybe 10 Turns Of The Handle. 4.The Puller Tool Will Automatically Pull Compression Nut And Ferrule..
100% Quality Guarantee – One Year Money Back. Buy With Confidence And Add To Cart Now! We Provide 100% Customer Support 1-Year Product Warranty. Have Any Problem, Please Email Us, We'll Reply Within 12 Hours..
Resistant & Wear Resistant.--Even Such As The Existing Supply Stops Are Severely Corroded Or Frozen, You Can Turn The Lever To Extract The Old Compression Sleeve From The Pipe.Ideal For Working On Frozen Or Corroded Supply Stops,Corrosion Resistant & Wear Resistant..
Make Your Life Easy--This Sleeve Remover Removes 1/2-Inch Copper Water Compression Sleeve.This Compression Sleeve Puller Removes Leaking Compression Sleeves Without Damaging Walls, Which Effortlessly Pulls The Nut And Ferral Off Of The Pipe..
Features
- Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes.
- Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe.
- Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.
- Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant.
- 100% QUALITY GUARANTEE ONE YEAR MONEY BACK. Buy with confidence and add to cart now! We provide 100% customer support 1-year product warranty. Have any problem, please email us, we'll reply within 12 hours.
- See more on Amazon...
Brand: MILMUMU | Manufacturer: MILMUMU
See On Amazon #8
Danco 86712 Moen Cartridge Puller, Pack of 1, Silver
Asin: B000DZH9I8 | Model: 86712 | PartNumber: 86712
Ean: 7535001158205, 0370839262284, 0372426506740, 0733353390725, 0037155867127, 0343538701071, 0362225732785
UPC: 733353390725, 372426506740, 370839262284, 037155867127, 343538701071, 362225732785
Functional: Removes Frozen Cartridges And Dislodges Sleeves On Moen Faucets Only.
Tub/Shower Faucets: Cartridge Removal Tool Works To Remove Old Worn-Out Cartridges From Moen Tub And Shower Faucets.
Built To Last: Durable Aluminum Construction Provides Strength And Reliability.
Cartridge Compatibility: Faucet Cartridge Puller Is Designed To Fit And Remove Both Brass And Plastic Cartridges.
Moen Compatible: Replace Your Old Moen Posi-Temp Tub/Shower Cartridge With Danco Model 88431E (Replaces Oem#1225), Model 80993Ts (Replaces Oem#1200), Model 88675A (Replaces Oem#1222).
Features
- CARTRIDGE REMOVAL TOOL: Removes Moen tub/shower Posi-Temp Pressure Balanced Shower Cartridges 1200,1222 & 1225 series
- MOEN COMPATIBLE: Replace your old Moen Posi-Temp tub/shower cartridge with Danco model 88431E (replaces OEM#1225), model 80993TS (replaces OEM#1200), model 88675A (replaces OEM#1222)
- FUNCTIONAL: Removes frozen cartridges and dislodges sleeves on MOEN faucets ONLY
- CARTRIDGE COMPATIBILITY: Faucet cartridge puller is designed to fit and remove both brass and plastic cartridges
- TUB/SHOWER FAUCETS: Cartridge removal tool works to remove old worn-out cartridges from Moen tub and shower faucets
- BUILT TO LAST: Durable aluminum construction provides strength and reliability
- See more on Amazon...
Brand: Danco | Manufacturer: Danco, Inc.
Dimensions: 7.10 x 1.40 x 5.10 inches | Weight: 0.20 pounds
Warranty: Warranty
See On Amazon #9
RIDGID 27023 Model 2002 One Stop 2-in-1 Wrench for Angle Stops, Straight Stops, and Compression Couplings
Asin: B0038G3RCQ | Model: 27023 | PartNumber: 27023 | Ean: 7258006909862, 0095691270238, 0956912702382, 7294104538252, 0785533770179, 0703765701938 | UPC: 956912702382, 095691270238, 703765701938, 785533770179
Efficient Grasping And Tightening: Smaller Wrench Allows You To Grasp Riser Nuts In Twice As Many Positions While The Larger Wrench Tightens Compression Nuts.
Multipurpose: Ideal For A Variety Of Other Installation Tasks Including Appliance Legs, Showerheads, Faucet Nuts, And Toilet Bowls.
Compact Design: Allows You To Conveniently Store The Smaller Wrench Inside The Larger Wrench's Tubular Body And Simply Unscrew To Remove It When It's Time For Use.
2-In-1 Tool: Features A 15/16-In. Open-End Wrench, A 9/16-In. Open-End Wrench, And An Open-End 12-Point Box-Line Wrench In One Tool To Make Plumbing Work Quick And Easy.
Features
- ONE STOP WRENCH: Provides the exact size wrench needed to install angle stops, straight stops, compression couplings, making it perfect for working with supply lines and shut-off valves
- 2-IN-1 TOOL: Features a 15/16-in. open-end wrench, a 9/16-in. open-end wrench, and an open-end 12-point box-line wrench in one tool to make plumbing work quick and easy
- EFFICIENT GRASPING AND TIGHTENING: Smaller wrench allows you to grasp riser nuts in twice as many positions while the larger wrench tightens compression nuts
- COMPACT DESIGN: Allows you to conveniently store the smaller wrench inside the larger wrench's tubular body and simply unscrew to remove it when it's time for use
- MULTIPURPOSE: Ideal for a variety of other installation tasks including appliance legs, showerheads, faucet nuts, and toilet bowls
- See more on Amazon...
Brand: RIDGID | Manufacturer: Ridgid Tool Company
Dimensions: 0.75 x 12.00 x 4.75 inches | Weight: 0.80 pounds
Warranty: RIDGID tools are warranted to be free of material and workmanship defects. This warranty lasts for the lifetime of the RIDGID tool. Warranty coverage ends when the product becomes unusable for reasons other than defects in workmanship or material.
See On Amazon #10
Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2 Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool
Asin: B0BCF1CDPX | Model: HMTT-001 | PartNumber: HMTT-001
【Work On Corroded & Frozen】Even Such As The Existing Valve Was Severely Corroded Or Frozen, You Can Turn The Lever To Extract The Old Compression Sleeve From The Pipe. Make Sure The Ferrule Puller Is Properly Aligned With The Pipe, And Then You Are Able To Remove The Nut And Ferrule With Maybe 10 Turns Of The Handle. Easy And Fast Solve The Problem Of Compression Valves Failing With Small Leaks. Fully Machined Body And Screw, This Ferrule Puller Is Corrosion Resistant & Wear Resistant..
【Great Compression Sleeve Puller Tool】We Love And Take Pride In Our Angle Stop Puller And We Back This Ferrule Blaster Up With Lifetime Service. Have The Confidence That This Compression Ring Removal Tool Will Last, If There Are Any Issues Of This Plumbing Tools, Just Contact Us And We Will Make It Right..
【2 Ways To Remove】Remove The Old Compression Fitting Or The Old Angle Stop.Way 1: Only Remove The Ferrule---Let The Ferrule In Between The Red Notched End Of The Tool (Notched Clamping Ferrule). Way 2: Both Remove The Compression Nut And Ferrule---Place Red Notched End Of Tool Behind Compression Nut. And Then Both Way1 Or Way2 All Need To: Engage The Silver Head End In Tubing. Hold Tool Firmly While Turning The T-Bar Handle, The Puller Tool Will Automatically Pull Compression Nut And Ferrule..
【Not Need To Cut Off The Pipe】Saves A Lot Of Time Around Cutting Old Pipes. Re-Designed Bullet Nose Will Not Pull Off And Is Easy To Use In Relatively Tight Spots. Especially If You Don't Have Sufficient Exposed Copper To Cut Off The Old Compression Fitting, This Angle Stop Puller Will Effortlessly Remove The Old Compression Ring And Reform The Previously Crimped Copper Pipe Back To A Perfect Circle. No Damage To The Copper. Makes Removing A Ferrule Simple, And Makes Plumbing Work Simple..
Features
- No Damage To Walls & Copper & Supply Lines This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool.
- Not Need To Cut Off The Pipe Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple.
- Work On Corroded & Frozen Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fast solve the problem of compression valves failing with small leaks. Fully machined body and screw, this ferrule puller is corrosion resistant & wear resistant.
- 2 Ways To Remove Remove the old compression fitting or the old angle stop.WAY 1: ONLY REMOVE THE FERRULE---Let the ferrule in between the red notched end of the tool (notched clamping ferrule). WAY 2: BOTH REMOVE THE COMPRESSION NUT AND FERRULE---Place red notched end of tool behind compression nut. And then both way1 or way2 all need to: Engage the silver head end in tubing. Hold tool firmly while turning the t-bar handle, the puller tool will automatically pull compression nut and ferrule.
- Great Compression Sleeve Puller Tool We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right.
- See more on Amazon...
Brand: Debialo | Manufacturer: Debialo
Dimensions: 1.57 x 5.91 x 12.20 inches
See On Amazon #11
Orion Motor Tech 21PCS Master Ball Joint Press, Upper and Lower Ball Joint Removal Tool, Automotive Ball Joint Press Kit
Asin: B01NBF1R6Q | Model: 0021BL | PartNumber: 0021BL
Professional Grade Quality And Durability - Off Road Weekend Warriors, Novices, And Professional Mechanics Trust The Orion Kit Because Orion Motor Tech Sources The Highest Quality Components From Around The World. Constructed From Heavy-Duty Forged Solid Carbon Steel With Anti-Rust Black-Oxide Finish On Adapters For Maximum Strength And Longevity That Resists Rust And Corrosion..
Orion Motor Tech - We Pursue Outstanding Quality And Professional Technical Support. If You Are Not Satisfied With This Product Or If You Have Any Question, Please Feel Free To Let Us Know..
Conveniently Organized In Custom Molded Case - Ball Joint Press / Bushing/ Removal Tool Kit Is Enclosed Inside A Heavy-Duty Abs Plastic Blow-Molded Carrying Case With Handle For Easy Storage, Safe Storage, And Quick Organization. Package Include: 9X Adapters, 1X Center Rod, 1X C-Frame, 1X Install Adapter, 1X Install Cup, 1X Install Cup Adapter, 1X Receiving Cup, 3X Receiving Tube, 1X Removal Adapter, 1X Screw, 1X Sleeve..
Universally Compatible With A Wide Range Of Vehicles - Use The Orion Motor Tech Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool With All The Receiver Tubes And Removing/Installing Adapters Needed To Effortlessly Remove Press Fit Parts Including Ball Joints, U-Joints, Brake Anchor Pins, And More On Most Gm, Chevy, Ford, And Dodge 2 And 4 Wheel Drive Pickups, Vans And Sport Utility Vehicles, Will Service Perfect For Vehicles Having The Dana 28, 30, 35, 44, 60 Axle.
Features
- ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH 22PCS Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with all the receiver tubes and removing/installing adapters needed to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, will service perfect for vehicles having the Dana 28, 30, 35, 44, 60 axle
- PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
- CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty ABS plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tube, 1x Removal Adapter, 1x Screw, 1x Sleeve.
- ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 19.69 x 24.02 x 4.72 inches
Warranty: 1 year
See On Amazon #12
Moen 104421 Cartridge Puller for 1200, 1222 and 1225 Single Handle Cartridges, Plumbing Tool for replacing Sink Faucet Cartridge
Asin: B00083EC6C | Model: 104421 | PartNumber: 104421 | Ean: 0785533648249, 0054374563517, 0887694945776, 0026508074589, 0730284125624, 5915903690393 | UPC: 730284125624, 054374563517, 887694945776, 785533648249, 026508074589
Genuine Moen: The Moen Cartridge Removal Tool Is An Authentic Moen Replacement Part.
Built To Last: Backed By Moen’S One Year Limited Warranty.
Built To Last: Backed By Moen’S One Year Limited Warranty.
Replacement Part: Ideal For Repairing Problematic Plumbing Fixtures Without The Need To Replace Them.
Features
- INCLUDES: Moen 104421 cartridge puller for 1200, 1222, and 1225 single-handle faucet cartridges
- REPLACEMENT PART: Ideal for repairing problematic plumbing fixtures without the need to replace them
- GENUINE MOEN: The Moen cartridge removal tool is an authentic Moen replacement part
- BUILT TO LAST: Backed by Moen s One Year Limited Warranty
- BUILT TO LAST: Backed by Moen s One Year Limited Warranty
- See more on Amazon...
Brand: MOEN | Manufacturer: Moen Incorporated
Dimensions: 1.50 x 7.50 x 1.40 inches | Weight: 0.50 Pounds
Warranty: 1 Year Limited
See On Amazon #13
Compression Sleeve Puller Tool Remove Ferrule & Nut OF Pipe,Ferrule Puller For 1/2 Copper Water Compression Sleeve And 1/2 Copper Tubing,Compression Ring Removal Tool Ferrule Removal
Asin: B0CXDCZWBY | Model: Ferrule Puller-001 | PartNumber: Ferrule Puller-001
【Wear-Resistant】-- Even If Existing Valves Are Severely Corroded Or Frozen, You Can Rotate The Lever To Remove The Old Compression Sleeve From The Pipe. Ensure The Compression Ring Removal Tool Aligns Correctly With The Pipe,Then Rotate The Compression Fitting Removal Tool Handle Approximately 10-15 Turns To Remove The Nut And Sleeve. Easily And Quickly Address The Issue Of Compression Valves Failing Due To Minor Leaks..
【Ferrule Puller】100% Quality Guarantee – And We Provide A Lifetime Of Service For This Ferrule Puller For 1/2 Copper Pipe. If There Are Any Issues With This Ferrule Blaster, Please Email Us, And We Will Respond Within 24 Hours..
【No Damage To Walls, Copper】This Compression Ring Puller Tool Can Remove Leaking Compression Sleeves Without Damaging Walls, Allowing For Easy Removal Of Nuts And Sleeves From The Pipes. The Ferrule Removal Tool Is Designed To Dismantle 1/2-Inch Copper Water Compression Sleeves..
【Save Time】This Compression Sleeve Puller Tool Is Easy To Use In Relatively Tight Spaces And Restores Previously Crimped Copper Pipes To A Perfect Circular Shape. It Won't Damage The Copper Material. Making The Removal Of Sleeves Easy, It Simplifies Pipe Work..
Features
- Operating Steps -- Method 1: This ferrule puller for disassembling sleeve only --- Place the sleeve between the red notched end of the tool (notch clamps the sleeve). Method 2: Remove the compression nut and sleeve --- Place the red notched end of the compression sleeve puller behind the compression nut. Ensure the compression sleeve puller aligns correctly with the pipe, then rotate the handle approximately 10-15 turns to remove the nut and sleeve.
- Save Time This compression sleeve puller tool is easy to use in relatively tight spaces and restores previously crimped copper pipes to a perfect circular shape. It won't damage the copper material. Making the removal of sleeves easy, it simplifies pipe work.
- Wear-Resistant -- Even if existing valves are severely corroded or frozen, you can rotate the lever to remove the old compression sleeve from the pipe. Ensure the compression ring removal tool aligns correctly with the pipe,then rotate the compression fitting removal tool handle approximately 10-15 turns to remove the nut and sleeve. Easily and quickly address the issue of compression valves failing due to minor leaks.
- No Damage to Walls, Copper This compression ring puller tool can remove leaking compression sleeves without damaging walls, allowing for easy removal of nuts and sleeves from the pipes. The ferrule removal tool is designed to dismantle 1/2-inch copper water compression sleeves.
- Ferrule Puller 100% Quality Guarantee and we provide a lifetime of service for this ferrule puller for 1/2 copper pipe. If there are any issues with this ferrule blaster, please email us, and we will respond within 24 hours.
- See more on Amazon...
Brand: MYHLPER | Manufacturer: MYHLPER
Dimensions: 4.70 x 5.00 x 1.70 Inches
See On Amazon #14
Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943- Sleeve Remover for 1/2-Inch Compression Fittings Only Corroded & Frozen Supply Stops Plumbing Tools Compression Ring Removal Tool
Asin: B0BX9WFQRT | Model: Sleeve Puller（03943） | PartNumber: Sleeve Puller（03943） | Ean: 0614160982801 | UPC: 614160982801
Operating Steps--1.Remove The Old Compression Fitting Or The Old Angle Stop. 2.Put The Nut Of Pipe To The Golden Threaded Mouth Of The Puller Tool To Tighten The Screw 3.Make Sure The Ferrule Puller Is Properly Aligned With The Pipe, And Then You Are Able To Remove The Nut And Ferrule With Maybe 10 Turns Of The Handle. 4.The Puller Tool Will Automatically Pull Compression Nut And Ferrule..
100% Quality Guarantee – One Year Money Back. Buy With Confidence And Add To Cart Now! We Provide 100% Customer Support 1-Year Product Warranty. Have Any Problem, Please Email Us, We'll Reply Within 12 Hours..
Resistant & Wear Resistant.--Even Such As The Existing Supply Stops Are Severely Corroded Or Frozen, You Can Turn The Lever To Extract The Old Compression Sleeve From The Pipe.Ideal For Working On Frozen Or Corroded Supply Stops,Corrosion Resistant & Wear Resistant..
Make Your Life Easy--This Sleeve Remover Removes 1/2-Inch Copper Water Compression Sleeve.This Compression Sleeve Puller Removes Leaking Compression Sleeves Without Damaging Walls, Which Effortlessly Pulls The Nut And Ferral Off Of The Pipe..
Features
- Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes.
- Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe.
- Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.
- Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant.
- 100% QUALITY GUARANTEE ONE YEAR MONEY BACK. Buy with confidence and add to cart now! We provide 100% customer support 1-year product warranty. Have any problem, please email us, we'll reply within 12 hours.
- See more on Amazon...
Brand: FALOSI | Manufacturer: MILMUMU
Dimensions: 7.50 x 5.50 x 0.50 inches
See On Amazon #15
Superior Tool 03876 Pro Handle & Sleeve Puller, Gray
Asin: B07DNPBJZD | Model: 3876 | PartNumber: 3876 | Ean: 0017197038761 | UPC: 017197038761
Brand: Superior Tool | Manufacturer: Superior Tool
Dimensions: 7.00 x 1.34 x 1.65 inches
See On Amazon #16
JEUCLEL US Standard Olive Remover Puller Tool for 1/2-inch / 3/4-inch Dia Solid Brass Pipe Fitting, Olive Removal Tool for Copper Pipe, Compression Sleeve Puller
Asin: B0B3R4CJ3P | Model: JE004 | PartNumber: JE004 | Ean: 0747832237333 | UPC: 747832237333
【Premium Material】 The Olive Puller Is Made Of Solid Brass. It Has The Advantages Of High Strength And High Hardness. It Has Strong Wear Resistance And Corrosion Resistance, And Has A Long Service Life..
【Wide Applications】 Olive Removal Tools Are Capable Of Various Tasks. It Is Applied To The Work Of Dismantling Olives In Various Scenarios. It Is An Indispensable Cost-Effective Tool..
【Easy To Use】 This Olive Removal Tool Is Very Simple To Operate, No Need To Read Complicated Instructions, It Can Be Used Easily. Save A Lot Of Time And Effort..
【Applicable Specifications】 The Olive Puller Can Be Applied To Brass Or Copper Pipes With Diameters Of 1/2 Inches And 3/4 Inches..
Features
- Ideal Tool This olive puller is the ideal tool for removing olives from pipes. It utilizes a compression fitting to lock the nut, thereby removing damaged or used olives from the pipe without damaging the pipe.
- Applicable Specifications The olive puller can be applied to brass or copper pipes with diameters of 1/2 inches and 3/4 inches.
- Premium Material The olive puller is made of solid brass. It has the advantages of high strength and high hardness. It has strong wear resistance and corrosion resistance, and has a long service life.
- Easy to Use This olive removal tool is very simple to operate, no need to read complicated instructions, it can be used easily. Save a lot of time and effort.
- Wide Applications Olive removal tools are capable of various tasks. It is applied to the work of dismantling olives in various scenarios. It is an indispensable cost-effective tool.
- See more on Amazon...
Brand: JEUCLEL | Manufacturer: JEUCLEL
Weight: 0.44 Pounds
Warranty: 1 year warranty
See On Amazon #17
CASEMATIX Locking Pistol Case Fits Small to Large 9mm Pistols with Room For Extra Clips and Attachments- Portable EVA Gun Rug Handgun Case with Foam, Snap In Zippers, Water Resistant, Shoulder Strap
Asin: B0BSMHP8MC | Model: EVA-HGC12 | PartNumber: EVA-HGC12
Lightweight Pistol Protection: The Durable Eva Exterior Of Our Hard Gun Case For Pistols Measures 12" X 7" X 2.5". It Is Constructed From Water Resistant Rigid Eva With Two Heavy Duty Waterproof Zippers That Are Double Stitched Along The Seam.
Handgun Carrying Case Gun Rug: Built In Programable Lock Features Metal Zipper Pullers That Securely Snap In. Removable Shoulder Strap With Metal Hardware Allows Instant Access When Camping Or Hiking.
Dense Padding: The Inside Measures 11" X 6.5" To Provide A Compact 9Mm Gun Case For Carrying Handgun With Scope And Accessories. Place Pistol And Accessories On The Dense Bottom Pad. The 1.25" Convoluted Foam Lid Then Compresses To Prevent Movement.
Light Duty Construction: This Gun Case Has Been Specifically Designed For A New Way To Transport Your Favorite Pistol And Accessories. The Sleek Shape Allows It To Fit In Larger Handgun Bags Or Be Used As A Range Bag Gun Rug.
Features
- CASEMATIX Premium EVA Locking Gun Case For Handguns: Rugged EVA material exterior with integrated snap in zippers, padded interior foam and universal design fits small to large pistols with room for scopes, sights, flashlights and magazines
- Light Duty Construction: This gun case has been specifically designed for a new way to transport your favorite pistol and accessories. The sleek shape allows it to fit in larger handgun bags or be used as a range bag gun rug
- Lightweight Pistol Protection: The durable EVA exterior of our hard gun case for pistols measures 12 x 7 x 2.5. It is constructed from water resistant rigid EVA with two heavy duty waterproof zippers that are double stitched along the seam
- Dense Padding: The inside measures 11 x 6.5 to provide a compact 9mm gun case for carrying handgun with scope and accessories. Place pistol and accessories on the dense bottom pad. The 1.25 convoluted foam lid then compresses to prevent movement
- Handgun Carrying Case Gun Rug: Built in programable lock features metal zipper pullers that securely snap in. Removable shoulder strap with metal hardware allows instant access when camping or hiking
- See more on Amazon...
Brand: CASEMATIX
Dimensions: 2.50 x 12.00 x 7.00 inches
See On Amazon #18
Superior Tool Company 03943 Compression Sleeve Puller and Sleeve Remover for 1/2-Inch Compression Fittings Only
Asin: B000L89AZC | Model: 3943 | PartNumber: 3943 | Ean: 0785533651720, 0017197039430, 0732454011522 | UPC: 732454011522, 017197039430, 785533651720
Ideal For Working On Frozen Or Corroded Supply Stops.
Won’T Damage Walls.
Features
- Easily removes compression sleeves
- Won t damage walls
- Ideal for working on frozen or corroded supply stops
- See more on Amazon...
Brand: Superior Tool | Manufacturer: Superior Tool Company
Dimensions: 0.75 x 6.75 x 4.00 inches | Weight: 0.50 pounds
See On Amazon #19
PLATATO Push to Connect Removal Tool Disconnect Tongs Tool for 1/2 , 3/4 , 1 Push in Fittings Plumbing Tools for Removal PEX PVC Copper Pipe
Asin: B0CJ4ZJ26L
Easy To Use: Put Appropriate Adapters, Put One Side Of This Plumbing Tool Fits Over The Fitting, And The Other Around The Pipe At The Release Ring, Then Squeeze And Pull The Pipe Off. It Provides Enough Leverage To Allow You To Operate With One Hand While Use The Other To Separate The Pipe..
Durable And High Quality: Made Of Heat-Treated Superior Carbon Steel, This Disconnect Tong Tool Is Rust And Corrosion Resistant, Which Make It Sturdy And Durable. It Has Non-Slip And Comfortable Handles, And An Easy Lock Mechanism To Keep The Tool Compact For Easy Storage..
Interchangeble Adapters: The Adapter Is Easy To Install Or Replace - Push On The Lever Labeled "Push", Follow The Direction Labeled "Pipe" And "Fitting" On Tool And Plates To Slide The Old Plate Out And Slide The New Plate In..
Unique Design: This Push To Connect Fittings Removal Tool Is Designed With Interchangeable Adapters For Different Pipe Sizes Include 1/2”(Installed), 3/4”, 1” (Use The Bare Pliers), Which Make This Release Tool Shorter Than Other Similar Tools So That It Can Reach The Pipe Perfectly..
Features
- QUICK DISCONNECT: This PLATATO disconnect tool can easily and quickly remove 1/2", 3/4", and 1" push to connect fittings, which bring great convenience to your plumbing work. Compatible with brand push-fit fittings. (except the 3/4 Max type)
- UNIQUE DESIGN: This push to connect fittings removal tool is designed with interchangeable adapters for different pipe sizes include 1/2 (installed), 3/4 , 1 (use the bare pliers), which make this release tool shorter than other similar tools so that it can reach the pipe perfectly.
- EASY TO USE: Put appropriate adapters, put one side of this plumbing tool fits over the fitting, and the other around the pipe at the release ring, then squeeze and pull the pipe off. It provides enough leverage to allow you to operate with one hand while use the other to separate the pipe.
- INTERCHANGEBLE ADAPTERS: The adapter is easy to install or replace - push on the lever labeled PUSH, follow the direction labeled PIPE and FITTING on tool and plates to slide the old plate out and slide the new plate in.
- DURABLE AND HIGH QUALITY: Made of heat-treated superior carbon steel, this disconnect tong tool is rust and corrosion resistant, which make it sturdy and durable. It has non-slip and comfortable handles, and an easy lock mechanism to keep the tool compact for easy storage.
- See more on Amazon...
Brand: PLATATO | Manufacturer: PLATATO
Dimensions: 2.17 x 8.46 x 2.17 inches | Weight: 0.71 pounds
See On Amazon
Looking For Something Else?
Search