780 Series Driver Clutch 1" Bore 1/4" Keyway fit for Comet for taking a 1 3/16-1 1/4" wide belt 4 cycle engines, Replace# 302405A / 302405
Asin: B0BFHJ4B38 | Model: 302405A，302405 | PartNumber: 302405A，302405
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Dimensions 】: 1" Bore With 1/4" Keyway; It Takes A 1 3/16 -1 1/4" Wide Belt; ( Important: Never Run Clutch W/O A 1 3/16" - 1 1/4" Wide Belt Installed.).
【Easy To Install】: Direct Replaces, Fast Install. You Can Replace Old Or Damaged Parts Directly..
【High Quality】: Made Of High-Quality Materials, High Reliability And Durability, Have Been Tested Many Times Before Leaving The Factory, Meet Or Exceed Oe Standards, Direct Fit..
【Replace Part Number】: 302405A，302405..
Features
- Adaptation Model : This drive clutch fits for Briggs Stratton Vanguards, fits for Kohler Commands, fits for Robin, fits for Honda, fits for Salsbury, fits for CVTech, fits for CVTech Powerbloc IBC and most other 4 cycle engines with crankshafts size listed above.
- Replace Part Number : 302405A 302405.
- Dimensions : 1 bore with 1/4 keyway; It takes a 1 3/16 -1 1/4 wide belt; ( Important: Never run clutch w/o a 1 3/16 - 1 1/4 wide belt installed.)
- High Quality : Made of high-quality materials, high reliability and durability, have been tested many times before leaving the factory, meet or exceed OE standards, direct fit.
- Easy to Install : Direct Replaces, fast Install. You can replace old or damaged parts directly.
- See more on Amazon...
Brand: JAVOUKA | Manufacturer: JAVOUKA
See On Amazon Similar To 780 Series Driver Clutch 1
#1
Bumper Trunk Quick Release Front Rear Bumper Fastener Kit
Asin: B09VDF2ZMN | Ean: 0768484030936 | UPC: 768484030936
First, Mark Where You Will Install The Quick Bumper Release Kit.Then,Drill The Holes.After,Install The Aluminum Knot.Put The Washer On The Other Side Of The Bumper/Fender. You Will Need A Hex Tool As Well As A Wrench To Fasten Everything Together.Afterwards, Mount It Back With The Rubber Band.You Can Either Put The Rubber Band In The Normal Way Or Even A Cross With The Same Result..
100% Satisfaction -When You Receive The Goods, If There Are Any Problem, Please Contact Us And Do Not Directly Open The Dispute. We Promise We Will Give You A Satisfied Solution After We Confirmed It. We Also Will Give You A Positive Evaluation..
This Is A Great Mod For People Who Are Always At The Pits. As You Can See, The Installation Does Not Take Too Long To Install, And The Drilling Is Completely Worth It For The Fresh New Look. Enjoy Your Quick Bumper Release Fasteners!.
Package Includes: 4 X Quick Release Tabs; 4 X Stainless Steel Bolts; 4 X Nuts; 4 X Washers; 2X O-Rings..
Features
- Need to attach and detach your bumper quickly? Quick release fasteners are great for front bumpers, rear bumpers, and hatch lids that need to be frequently removed. They are perfect for people who go to the pits often and are not difficult to install.
- Package Includes: 4 x Quick release tabs; 4 x Stainless steel bolts; 4 x Nuts; 4 x Washers; 2x O-Rings.
- First, mark where you will install the quick bumper release kit.Then,Drill the holes.After,Install the aluminum knot.Put the washer on the other side of the bumper/fender. You will need a hex tool as well as a wrench to fasten everything together.Afterwards, mount it back with the rubber band.You can either put the rubber band in the normal way or even a cross with the same result.
- This is a great mod for people who are always at the pits. As you can see, the installation does not take too long to install, and the drilling is completely worth it for the fresh new look. Enjoy your quick bumper release fasteners!
- 100% SATISFACTION -When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it. We also will give you a positive evaluation.
- See more on Amazon...
Brand: Ouzorp | Manufacturer: Ouzorp
See On Amazon #2
ATE Original TYP 200 Racing Quality DOT 4 Brake Fluid, 1 Liter Can
Asin: B003VXRPL0 | Model: 706202 | PartNumber: 706202 | Ean: 0653345320236, 4006633108256, 0805890131519, 0826732430041 | UPC: 805890131519, 826732430041, 653345320236
Excellent Corrosion Protection Due To Selected Additives.
Makes Brake Fluid Changing Intervals Of Up To 3 Years Possible.
High Safety Tolerance Against Steam Bubbles.
Non-Foaming When Filling And Bleeding The Brake System.
Features
- Minimal decrease of boiling point due to excellent water locking properties
- Non-foaming when filling and bleeding the brake system
- Excellent corrosion protection due to selected additives
- High safety tolerance against steam bubbles
- Makes brake fluid changing intervals of up to 3 years possible
- See more on Amazon...
Brand: ATE | Manufacturer: ATE
Dimensions: 6.27 x 6.30 x 4.52 inches | Weight: 0.61 pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #3
Car Rear View Mirror, 12 Inch Car Interior Panoramic Convex Rearview Mirror, Clip-On HD Wide Angle Extended Curved Mirror, Reduce Blind Spot Effectively, Universal Car Accessories (Irregular White)
Asin: B0BYSDF3J7 | Model: Rear View Mirror | PartNumber: Rear View Mirror
【Quick Installation】: It Can Be Installed On The Original Rear View Mirror Of The Car So That You Don't Have To Remove The Original Mirror. It Comes With Adjustable Clips On The Back, Fix The Adjustable Clips On The Edge Of The Original Mirror, Pull Down The Clips To Make Sure It Fits Perfectly, Then Push The Clips Down To The Bottom Until It Can Be Securely Held Still To Complete The Installation..
【Considerate Service】: We Are Committed To Providing Quality Products And Services. If You Are Still Unclear About This Rear View Mirror Or Still Have Questions About The Installation Process, You Are Welcome To Contact Us At Any Time And We Will Do Our Best To Provide You With A Satisfactory Solution..
【Vehicle Universal】: It Measures 11.77 * 3.54 Inches And Fits Original Rear View Mirror Between 1.9-3.3 Inches (48-84Mm) In Height. This Is A Widely Universal Interior Accessory For Vehicles And Can Be Used On Most Models Such As Sedans, Trucks, Suvs Etc. For Your Shopping Experience, Please Buy The Right Product According To The Size Of The Original Rear View Mirror..
【Wider View】: The Curved Mirror Surface Effectively Expands The Imaging Area, Providing A Wider Field Of View And A Clear View Of The Space Inside The Car, So You Can Observe Children And Pets In The Car At Any Time. Effectively Eliminating The Blind Spot Of The Traditional Flat Mirror's Field Of View, You Can See Both Sides Of The Rear Door Through It, Making Reversing Safer..
Features
- High Quality Mirror : This rear view mirror is mainly made of HD glass and ABS plastic, HD glass can effectively eliminate distortion and double reflection, safer driving. The material is stable and can withstand high summer temperatures, and the plastic edges are resistant to wear and tear and will last a long time.
- Wider View : The curved mirror surface effectively expands the imaging area, providing a wider field of view and a clear view of the space inside the car, so you can observe children and pets in the car at any time. Effectively eliminating the blind spot of the traditional flat mirror's field of view, you can see both sides of the rear door through it, making reversing safer.
- Quick Installation : It can be installed on the original rear view mirror of the car so that you don't have to remove the original mirror. It comes with adjustable clips on the back, fix the adjustable clips on the edge of the original mirror, pull down the clips to make sure it fits perfectly, then push the clips down to the bottom until it can be securely held still to complete the installation.
- Vehicle Universal : It measures 11.77 * 3.54 inches and fits original rear view mirror between 1.9-3.3 inches (48-84mm) in height. This is a widely universal interior accessory for vehicles and can be used on most models such as sedans, trucks, SUVs etc. For your shopping experience, please buy the right product according to the size of the original rear view mirror.
- Considerate Service : We are committed to providing quality products and services. If you are still unclear about this rear view mirror or still have questions about the installation process, you are welcome to contact us at any time and we will do our best to provide you with a satisfactory solution.
- See more on Amazon...
Brand: 8sanlione | Manufacturer: 8sanlione
Dimensions: 1.50 x 1.00 x 0.80 Inches
Warranty: 0.2
See On Amazon #4
Nilight 415 Pcs Car Retainer Clips & Fastener Remover - 18 Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Clips Compatible with GM Ford Toyota Honda Chrysler,2 Years Warranty (CL-19)
Asin: B083FXNH6T | Model: CL-19 | PartNumber: CL-19 | Ean: 0812227032579 | UPC: 812227032579
Widely Application-Theses Push Clips Are Widely Used For Trim Panel Clips, Door Trim Clips, Door Panel Clips, Bumper Clips, Fender Clips, Engine Cover And Splash Shield Retainer Replacement. It Always Covers Some Applications Include Telecom Equipment, Motor Vehicles, Domestic Appliances, Furniture And Electrical Equipment.
We Offer 2 Years Nilight Warranty And Lifetime Best Customer Service.2 Years Warranty Honored By Nilight.
Bonus Fastener Remover - Allow You To Quickly And Easily Remove Car Door Panel And Upholstery Clips Without Causing Damage To Them. Easy Access Into Confined Areas.
Premium Quality Retainer Assortment- Nilight Car Push Pins Are Made Of High-Quality Heavy-Duty Material, Which Is Strong, Robust And Vibration Resistant, Would Not Break Or Crack Easily.
Features
- 18 MOST COMMON SIZES-Nilight Fasteners Clips contains 18 types of most common sizes of fastener clips, suitable for the OEM replacement in 6-10mm hole sizes,that you ll always have the right size
- PREMIUM QUALITY RETAINER ASSORTMENT- Nilight car push pins are made of high-quality heavy-duty material, which is strong, robust and vibration resistant, would not break or crack easily
- WIDELY APPLICATION-Theses push clips are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainer replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment
- BONUS FASTENER REMOVER - Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas
- We offer 2 Years Nilight Warranty and Lifetime Best Customer Service.2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 30.50 x 5.80 x 22.40 inches
Warranty: 2 Years Warranty
See On Amazon #5
Nilight Car Retainer Clips Fastener Remover 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips for GM Ford Toyota Honda Chrysler,2 Years Warranty, 120PCS Clips & Remover
Asin: B08CZQKZKH | Model: CL-30-A | PartNumber: CL-30-A | Ean: 0727196413871 | UPC: 727196413871
【Bonus Fastener Remover】- The Fastener Remover Is Corrosion-Resistant And Is Made Of Chrome Plated Carbon Steel. The Ergonomic Strong Handle Allows Safe Removal Of Metal Or Plastic Clips..
【Fits Most Popular Makes And Models】- 91503-Sz3-003, 91503-Sz5-003, 52161-16010, 21030249, N807389s, 6503598, 14019205, 14019206, 34201621, 91512-Sx0-003,And Many Others.2 Years Warranty Honored By Nilight.
【Widely Application】- These Push Clips Are Widely Used For Trim Panel Clips, Door Trim Clips, Door Panel Clips, Bumper Clips, Fender Clips, Engine Cover And Splash Shield Retainers Replacement. It Always Covers Some Applications Include Telecom Equipment, Motor Vehicles, Domestic Appliances, Furniture And Electrical Equipment..
【Made Of High Quality Nylon】- These Clips Are Made Of High-Quality Black Nylon Material, Anti-Wear And Anti-Corrosion, Would Not Break Or Crack Easily During Use..
Features
- TOTAL 120 PIECES - 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ),6 different Push pin rivet for many brand vehicles.All packed in a plastic container for easy organization and storage.
- MADE OF HIGH QUALITY NYLON - These clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
- BONUS FASTENER REMOVER - The fastener remover is corrosion-resistant and is made of chrome plated carbon steel. The ergonomic strong handle allows safe removal of metal or plastic clips.
- WIDELY APPLICATION - These Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
- FITS MOST POPULAR MAKES AND MODELS - 91503-SZ3-003, 91503-SZ5-003, 52161-16010, 21030249, N807389S, 6503598, 14019205, 14019206, 34201621, 91512-SX0-003,and many others.2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 5.91 x 0.39 x 2.36 inches | Weight: 0.77 pounds
Warranty: 2 Years Warranty
See On Amazon #6
Titan Jet Black Poly 210T Car Cover for Sedans 186-202". Waterproof, UV Protection, Scratch Resistant, Driver-Side Zippered Opening. Fits Camry, Accord and More.
Asin: B087CCJFCQ | Model: A-1 | PartNumber: A-1 | Ean: 0680499980665 | UPC: 680499980665
Driver-Side Zippered Door For Easy Access To The Car When The Cover Is On.
Includes 7 Foot Cable With Lock To Thread Through The Security Loops Along The Bottom.
Click Close Straps Snap In Place To The Keep Cover On.
Built With A 210T Polyester Outer Layer, A Polyurethane Layer For Waterproofing, An Aluminum Coating For Uv Defense, And An Anti-Scratch Inner Coating, The Jet Black Poly 210T Provides Exceptional Protection Against The Elements..
Features
- Waterproof Car Cover for Sedans Measuring 186-202 Inches Long. Fits Accord, Altima, Fusion, Malibu, and More.
- Built with a 210T Polyester Outer Layer, a Polyurethane Layer for Waterproofing, an Aluminum Coating for UV defense, and an Anti-Scratch Inner Coating, the Jet Black Poly 210T Provides Exceptional Protection Against the Elements.
- Driver-Side Zippered Door for Easy Access to the Car when the Cover is On
- Click Close Straps Snap in Place to the Keep Cover On
- Includes 7 Foot Cable with Lock to Thread Through the Security Loops along the Bottom
- See more on Amazon...
Brand: Titan Performance Products | Manufacturer: Newquest Brands, LLC
Dimensions: 47.00 x 200.00 x 70.00 inches | Weight: 3.50 pounds
See On Amazon #7
Gistilli 20pcs Rocker Fender Exterior Trim Molding Clip Compatible with Jeep Grand Cherokee Compass 68172491AA 68271803AA 68395627AA
Asin: B0BY7ZLLN9 | Model: Gistilli-68172491AA | PartNumber: Gistilli-68172491AA
【Size】Top Head Size: 0.47" X 0.79"; Bottom Head Size: 0.47" X 0.79"; Stem Length: 0.43"; Fits 9Mm Holes..
【Package Includes】20 X Rocker Flare Molding Clips..
【Compatibility】Compatible With Buick Chevrolet Gmc Chrysler Jeep Pontiac Saturn Cherokee Compass Grand Cherokee Dodge Durango Challenger..
【High-Quality Material】These Rivet Clips Are Made Of High-Quality Nylon Material, Which Is Sturdy And Durable, And Will Not Easily Break Or Break When You Use It..
Features
- OEM Replacement OEM Number: 68172491AA 68271803AA 68395627AA 11571175 19352782 11562250 15127746
- High-Quality Material These rivet clips are made of high-quality nylon material, which is sturdy and durable, and will not easily break or break when you use it.
- Size Top head size: 0.47 x 0.79; Bottom head size: 0.47 x 0.79; Stem length: 0.43; Fits 9mm holes.
- Compatibility Compatible with Buick Chevrolet GMC Chrysler Jeep Pontiac Saturn Cherokee Compass Grand Cherokee Dodge Durango Challenger.
- Package Includes 20 x Rocker flare molding clips.
- See more on Amazon...
Brand: Gistilli | Manufacturer: Gistilli
Dimensions: 0.63 x 0.80 x 0.48 inches
See On Amazon #8
Prestone AS800Y DOT 4 Synthetic Brake Fluid - 12 oz.
Asin: B004QQ721Y | Model: AS800Y | PartNumber: AS800Y | Ean: 0797496876287, 0078433160233, 7844908481140 | UPC: 797496876287, 078433160233
Compatible With All Conventional Brake Fluids.
Excellent Performance In High-Temperature Braking Systems.
Substantially Reduces The Possibility Of Fluid Vaporization And Eventual Brake Failure.
Provides Corrosion Protection For All Metals Within The Braking System.
Features
- Recommended for all ABS, disc and drum brake systems as well as hydraulic clutches requiring DOT 3 and DOT 4 fluids
- Provides corrosion protection for all metals within the braking system
- Compatible with all conventional brake fluids
- Substantially reduces the possibility of fluid vaporization and eventual brake failure
- Excellent performance in high-temperature braking systems
- See more on Amazon...
First Available: 07/18/2012
Brand: Prestone | Manufacturer: Prestone
Dimensions: 6.90 x 0.91 x 8.40 inches | Weight: 0.75 Pounds
See On Amazon #9
BESULEN Automotive Relay, Original Car Air Conditioning Control Relay for 056700-9160, 4-PIN 40/30AMP 12V DC Waterproof Relay for Auto A/C Radiator Fan, Car Truck Accessories Replacement
Asin: B0CJN4SGZW | Model: Automotive Relay | PartNumber: Automotive Relay
【Function】: This Car Relay Can Control The Start And Stop Of Car Air Conditioner. Regulate The Temperature Inside The Car In The Best Condition, Providing A Comfortable Driving Environment For The Driver And Passengers..
【Operation】: Plug And Play, Just Simple Wiring And Plug-In Connection Can Be Used. Note: The Car Air Conditioning Control Relay Has A Certain Waterproof And Dustproof Ability, It Can Block Splashing Water Droplets And Dirt, But It Can't Be Immersed In Water For Use..
【Principle】: When The Temperature Inside The Car Reaches The Target Temperature, The Sensor Will Make The Relay Stop The Cooling Action Of The Air Conditioner. When The Temperature Inside The Car Exceeds, The Sensor Will Start The Cooling Action Of The Air Conditioning Relay..
【Specification】: 4 Pin 40A/30A 12V Dc, Original Car Air Conditioning Control Relay, Model Number 056700-9160, Perfect Replacement For Old And Damaged Relay, Widely Used In All Kinds Of Cars, Suvs, Trucks And More Vehicles..
Features
- Material : Made of high quality plastic shell + alloy pins, firm, stable structure, wear-resistant, not easy to deform or break. Alloy pins, good conductivity, high efficiency, anti-rust, can withstand hot and cold conditions, long service life.
- Specification : 4 pin 40A/30A 12V DC, original car air conditioning control relay, model number 056700-9160, perfect replacement for old and damaged relay, widely used in all kinds of cars, SUVs, trucks and more vehicles.
- Function : This car relay can control the start and stop of car air conditioner. Regulate the temperature inside the car in the best condition, providing a comfortable driving environment for the driver and passengers.
- Principle : When the temperature inside the car reaches the target temperature, the sensor will make the relay stop the cooling action of the air conditioner. When the temperature inside the car exceeds, the sensor will start the cooling action of the air conditioning relay.
- Operation : Plug and play, just simple wiring and plug-in connection can be used. Note: The car air conditioning control relay has a certain waterproof and dustproof ability, it can block splashing water droplets and dirt, but it can't be immersed in water for use.
- See more on Amazon...
Brand: BESULEN | Manufacturer: BESULEN
Dimensions: 0.20 x 0.50 x 0.30 inches | Weight: 0.02 Pounds
See On Amazon #10
Kewucn 2PCS Non-Slip Car Pedal Pads, Aluminum Alloy Brake Gas Accelerator Clutch Pedal Cover, Universal Foot Pedals Rest Plate Kits Replacement Accessories Fits for Most MT and ATV (Red 2PCS)
Asin: B0CBPT4XGP | Model: Non-Slip Car Pedal Pads | PartNumber: Non-Slip Car Pedal Pads
【Easy Installation】: This Product Is Easy To Install And Requires No Drilling. It Is Designed According To The Original Pedal Size, Which Can Perfectly Fit Your Original Pedal. Each Pedal Comes With A Set Screw And 7-Way Clip To Make Installation A Breeze..
【Aesthetic Effect】: This Car Pedal Pad Is Not Only Practical But Also A Great Decorative Item. It Protects The Surface Of Your Car Pedals From Wear And Tear And Is Also Very Decorative. With It, Your Car Will Look More Individual While Adding A Sporty And Stylish Style..
【Widely Application】: The Brake/Clutch Pedal Cover Measures 3.54×2.76 Inches. The Gas Pedal Cover Measures 5.98×3.19 Inches. It Fits Most Cars With Manual And Automatic Transmissions. Please Check The Size Of Your Car's Pedal Before Purchasing To Make Sure This Fits Your Vehicle..
【Functional Features】: The Surface Of Our Aluminum Pedal Pad Is Added With Anti-Slip Strips To Increase The Coefficient Of Friction Between The Sole And The Pedal, Providing Better Anti-Slip Effect For Your Feet And Thus Improving Driving Safety. In Addition, It Protects The Pedal Surface Of The Original Pedal And Extends The Life Of The Pedal..
Features
- High-Quality Materials : This car pedal pad is made of high quality aluminum alloy and non-slip rubber, which is hard, resistant to wear and tear, corrosion resistance, and not easy to deformation and breakage. The pedal surface is equipped with anti-slip bolts to prevent slippage, thus improving driving safety.
- Functional Features : The surface of our aluminum pedal pad is added with anti-slip strips to increase the coefficient of friction between the sole and the pedal, providing better anti-slip effect for your feet and thus improving driving safety. In addition, it protects the pedal surface of the original pedal and extends the life of the pedal.
- Easy Installation : This product is easy to install and requires no drilling. It is designed according to the original pedal size, which can perfectly fit your original pedal. Each pedal comes with a set screw and 7-way clip to make installation a breeze.
- Widely Application : The brake/clutch pedal cover measures 3.54 2.76 inches. The gas pedal cover measures 5.98 3.19 inches. It fits most cars with manual and automatic transmissions. Please check the size of your car's pedal before purchasing to make sure this fits your vehicle.
- Aesthetic Effect : This car pedal pad is not only practical but also a great decorative item. It protects the surface of your car pedals from wear and tear and is also very decorative. With it, your car will look more individual while adding a sporty and stylish style.
- See more on Amazon...
Brand: Kewucn | Manufacturer: Kewucn
Warranty: 0.2
See On Amazon #11
ZBGUN 1 PC Car Brake Clutch Cable, Multifunctional Emergency Brake Cable Connector Modification Repair Kit, Repair Replacement Accessories, Compatible with Cars, Off-Road, and Motorcycles (Silver)
Asin: B0CRN9P5BR | Model: ZBSCX3300SI-1PC | PartNumber: ZBSCX3300SI-1PC
Reliability And Durability: The Emergency Brake Clutch Cable Has Good Reliability And Durability And Can Withstand Long-Term Use And Tests Under Various Environmental Conditions. Reasonable Structural Design And High-Quality Material Selection Can Ensure That The Cable Is Not Easily Broken Or Damaged During Use And Ensures Its Stable Operation For A Long Time..
What You Will Receive: You Will Receive A Car Brake Clutch Cable Set, Which Contains A Brake Clutch Cable Cable And Ten Connectors Of Different Specifications. If You Have Any Usage Problems, Please Feel Free To Contact Us Directly And We Will Solve The Problem For You Within 24 Hours On Working Days..
Easy To Install And Operate: Installing The Emergency Brake Clutch Cable Is Relatively Simple, Just Connect It To Your Vehicle's Brake Or Clutch System. In An Emergency, The Driver Simply Pulls The Cable To Quickly Trigger The Emergency Braking System And Stop The Vehicle..
Emergency Braking Function: This Cable Is Used To Activate The Vehicle's Emergency Braking System. When An Emergency Occurs, The Driver Can Quickly Stop The Vehicle By Pulling The Clutch Cable Cable To Ensure Driving Safety..
Features
- High-strength Materials: In order to ensure the reliability of emergency braking, the cable is made of high-strength materials. These materials have sufficient tensile strength and wear resistance and can withstand the huge force during emergency braking.
- Emergency Braking Function: This cable is used to activate the vehicle's emergency braking system. When an emergency occurs, the driver can quickly stop the vehicle by pulling the clutch cable cable to ensure driving safety.
- Reliability and Durability: The emergency brake clutch cable has good reliability and durability and can withstand long-term use and tests under various environmental conditions. Reasonable structural design and high-quality material selection can ensure that the cable is not easily broken or damaged during use and ensures its stable operation for a long time.
- Easy to Install and Operate: Installing the emergency brake clutch cable is relatively simple, just connect it to your vehicle's brake or clutch system. In an emergency, the driver simply pulls the cable to quickly trigger the emergency braking system and stop the vehicle.
- What You Will Receive: You will receive a car brake clutch cable set, which contains a brake clutch cable cable and ten connectors of different specifications. If you have any usage problems, please feel free to contact us directly and we will solve the problem for you within 24 hours on working days.
- See more on Amazon...
Brand: ZBGUN | Manufacturer: ZBGUN
Dimensions: 1.00 x 1.00 x 1.00 Inches
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon #12
VEVOR Primary Drive Clutch, 780 Series Go-Kart Drive Clutch 1" Bore 1/4" Keyway Comet, for Taking a 1 3/16-1 1/4" Wide Belt 4 Cycle Engines, Replace# 302405A / 302405
Asin: B0CYC8LJ43 | Model: 192DR78011816 | PartNumber: 192DR78011816 | Ean: 0197988193067 | UPC: 197988193067
Authentic Replacement Parts: Tailored To Match Original Part Specifications, This Primary Drive Clutch Assembly Serve As The Perfect Replacements For Old Or Worn Components. Offering Easy Two-Step Assembly Without The Need For Drive Pulley Or Clutch Adjustments. Note: Professional Installation Is Recommended, And Attention To The Engine's Bolt Requirements (American Or Metric) To Ensure A Secure Fit..
Efficiency And Smooth Operation: If Your Kart Exhibits Issues Like Abnormal Noise, Vibrations, Or Steering Difficulties, Inspecting And Replacing The Drive Clutch Can Lead To Marked Improvements. This Upgrade Ensures Your Vehicle Operates Efficiently, Navigates Bumpy Roads With Ease, And Maintains Quick And Smooth Transitions Between Engagement And Separation States..
Durable Alloy Construction: Crafted From Iron And Aluminum Alloy, The Primary Driving Clutch Replacement Boasts A Sturdy Build With Excellent Heat Dissipation Features. The Black Surface Treatment Enhances Rust Resistance Against Elements Such As Oil And Rain, Prolonging The Service Life Under Various Environmental Conditions..
Dynamic Balance Performance: Manufactured With Strict Quality Control Standards, The Drive Clutch Axle Undergoes Dynamic Balance Precision Processing. Reducing Imbalance Caused By Parts Wear, Ensuring Firm Engagement, Efficient Operation, And Minimizing The Potential For Abnormal Sounds And Vibrations..
Features
- 780 Series Drive Clutch: The 780 series primary drive clutch is designed with a 1-inch (25.4mm) bore and a 1/4 inch (6.35mm) keyway, compatible with most motors, including Briggs Stratton Pioneer, Kohler Command, Robin, Honda, Salsbury, CVTech, and CVTech Powerbloc IBC, and most 4-stroke engine crankshaft sizes mentioned. Replacement part number: 302405A and 302405.
- Dynamic Balance Performance: Manufactured with strict quality control standards, the drive clutch axle undergoes dynamic balance precision processing. Reducing imbalance caused by parts wear, ensuring firm engagement, efficient operation, and minimizing the potential for abnormal sounds and vibrations.
- Authentic Replacement Parts: Tailored to match original part specifications, this primary drive clutch assembly serve as the perfect replacements for old or worn components. Offering easy two-step assembly without the need for drive pulley or clutch adjustments. Note: Professional installation is recommended, and attention to the engine's bolt requirements (American or metric) to ensure a secure fit.
- Durable Alloy Construction: Crafted from iron and aluminum alloy, the primary driving clutch replacement boasts a sturdy build with excellent heat dissipation features. The black surface treatment enhances rust resistance against elements such as oil and rain, prolonging the service life under various environmental conditions.
- Efficiency and Smooth Operation: If your kart exhibits issues like abnormal noise, vibrations, or steering difficulties, inspecting and replacing the drive clutch can lead to marked improvements. This upgrade ensures your vehicle operates efficiently, navigates bumpy roads with ease, and maintains quick and smooth transitions between engagement and separation states.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 4.92 x 7.17 x 7.17 inches | Weight: 6.39 Pounds
See On Amazon #13
2PCS Anti-Slip Car Pedal Covers Kit,[Upgraded Version] No Drilling Gas+Brake Pedal Cover for Safe Driving,Universal Car Accessories Interior Fits Automatic Transmission (Black)
Asin: B0CGWCQHHN | Model: Car Pedal Covers | PartNumber: Car Pedal Covers
Ideal Of Car Decor：Four Styles For Your Needs. High-End Texture Shown In Metallic And Vibrant Colorways, Embellishing Your Car's Interior And Allowing You To Quickly See The Throttle In A Dimly Lit Car To Prevent Mis-Stepping..
Simple Installation：This Product Installation Does Not Require Drilling, Do Not Worry About Hurting Your Car. Fixing Method Is Screw And Fixed Accessories Clip To The Original Car Pedal Fixed, Just A Few Simple Steps To Complete The Installation (Refer To The Installation Tutorial On The Back Of The Box For Details)..
Widely Adaptable：The Foot Pedal Set Includ Brake Pedal, And Gas Pedal Cover. The Pedal Covers Are Sized And Precisely Shaped To Fit Most Cars. Guaranteed To Fit Tightly Over The Original Pedal, Avoiding The Safety Hazard Of A Poorly Sized Fit..
Non-Slip Design：Our R & D Team In-Depth Study Of The Driver's Pedaling Action, The Anti-Slip Rubber Concentrated In The High-Frequency Pedaling Area. Scientific Layout Of Raised Circles On The Surface For Excellent Wear Resistance And Grip, Driving To Achieve Effective Anti-Slip..
Features
- Quality Assurance Our pedal covers are made of thickened PVC hard material, rust-proof and durable, not easy to break deformation. Rubber and ABS using one-piece injection molding technology, a solid fit, you can step on it does not fall off. Effective protection of the gas pedal.
- Non-Slip Design Our R & D team in-depth study of the driver's pedaling action, the anti-slip rubber concentrated in the high-frequency pedaling area. Scientific layout of raised circles on the surface for excellent wear resistance and grip, driving to achieve effective anti-slip.
- Ideal of Car Decor Four styles for your needs. High-end texture shown in metallic and vibrant colorways, embellishing your car's interior and allowing you to quickly see the throttle in a dimly lit car to prevent mis-stepping.
- Widely Adaptable The foot pedal set includ brake pedal, and gas pedal cover. The pedal covers are sized and precisely shaped to fit most cars. Guaranteed to fit tightly over the original pedal, avoiding the safety hazard of a poorly sized fit.
- Simple Installation This product installation does not require drilling, do not worry about hurting your car. Fixing method is screw and fixed accessories clip to the original car pedal fixed, just a few simple steps to complete the installation (refer to the installation tutorial on the back of the box for details).
- See more on Amazon...
Brand: carleef | Manufacturer: Carleef
Dimensions: 1.34 x 5.55 x 2.90 inches
Warranty: Warranty within 6 months
See On Amazon #14
GEATaaT 780 Series Driver Clutch 1" Bore 1/4" Keyway Comet Replace#302405A
Asin: B0B5CQ29JK | Ean: 0751717306700 | UPC: 751717306700
【Description】1" Bore With 1/4" Keyway; It Takes A 1 3/16 -1 1/4" Wide Belt; Never Run Clutch W/O A 1 3/16" - 1 1/4" Wide Belt Installed..
【Perfect Service】2 Year Warranty.Friendly Return Policy And Customer Service. If You Have Any Questions, Please Contact Us By Email, We Will Reply You Within 24 Hours..
【High Quality】Made Of High-Quality Materials, High Reliability And Durability, Have Been Tested Many Times Before Leaving The Factory, Meet Or Exceed Oem Standards..
【Replace Part Number】302405A，302405..
Features
- Adaptation Model This drive clutch for Briggs Stratton Vanguards, Kohler Commands, Robin, Honda, Salsbury, CVTech, CVTech Powerbloc IBC and most other 4 cycle engines with crankshafts size listed above.
- Replace Part Number 302405A 302405.
- Description 1 bore with 1/4 keyway; It takes a 1 3/16 -1 1/4 wide belt; Never run clutch w/o a 1 3/16 - 1 1/4 wide belt installed.
- High Quality Made of high-quality materials, high reliability and durability, have been tested many times before leaving the factory, meet or exceed OEM standards.
- Perfect service 2 Year Warranty.Friendly return policy and customer service. If you have any questions, please contact us by email, we will reply you within 24 hours.
- See more on Amazon...
Brand: GEATaaT | Manufacturer: Gelunxin
See On Amazon #15
yvshy 1 PC Car Shift Knob, 2.16" x 1.41" x 0.98" Alloy Manual Transmission Five-Speed Modified Shift Head, Decorative Accessory, Compatible with Most Vehicles (Multicolored)
Asin: B0CVXP17HK | Model: YVSPDT2205MC-1PC | PartNumber: YVSPDT2205MC-1PC
Alloy Material: This Product Is Made Of High-Quality Alloy Material. Alloy Is A Lightweight, High-Strength Material That Can Exert Excellent Performance In Terms Of Impact Resistance, So A Transmission Made Of Alloy Is More Durable And Beautiful..
Package Contents: You Will Receive A 2.16" X 1.41" X 0.98" Manual Car Shift Knob, Three Adapters. If You Have Any Usage Problems, Please Feel Free To Contact Us Directly And We Will Solve The Problem For You Within 24 Hours On Working Days..
Knob Design: The Knob Is Designed Using Ergonomic Principles To Ensure Comfort And Anti-Slip Performance When Held By The Driver, Especially When The Hands Are Wet Or Have A Lot Of Sweat..
Manual Transmission: Unlike Automatic Transmission Models, Manual Transmission Requires The Driver To Control The Clutch And Shift By Himself. The Knob Of This Transmission Has Clear Markings And A Good Feel To Help The Driver Shift Gears Accurately..
Features
- Five Gears: It has five gears, each gear represents a different speed and rotational speed. The first gear is the lowest speed and is suitable for starting and climbing hills; the second to fourth gears are suitable for city road driving; and the fifth gear is suitable for highway driving.
- Manual Transmission: Unlike automatic transmission models, manual transmission requires the driver to control the clutch and shift by himself. The knob of this transmission has clear markings and a good feel to help the driver shift gears accurately.
- Alloy Material: This product is made of high-quality alloy material. Alloy is a lightweight, high-strength material that can exert excellent performance in terms of impact resistance, so a transmission made of alloy is more durable and beautiful.
- Knob Design: The knob is designed using ergonomic principles to ensure comfort and anti-slip performance when held by the driver, especially when the hands are wet or have a lot of sweat.
- Package Contents: You will receive a 2.16 x 1.41 x 0.98 manual car shift knob, three adapters. If you have any usage problems, please feel free to contact us directly and we will solve the problem for you within 24 hours on working days.
- See more on Amazon...
Brand: yvshy | Manufacturer: yvshy
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon #16
MiKaFex 780 Series Black Driver Clutch 1" Bore 1/4" Keyway Comet For Taking a 1 3/16-1 1/4" Wide Belt 4 Cycle Engines Replace#302405A
Asin: B0C1YXK9VP | Model: Clutch | PartNumber: Clutch | Ean: 0768469007946 | UPC: 768469007946
【Replace Part Number】:302405A，302405.
【Lifetime Warranty】:Once There Is A Problem With The Product, Contact Us Here To Solve It Perfectly For You, Without Worrying About Quality Problems.
【High Quality】: Our Products Use High-Quality Raw Materials And Undergo Rigorous Testing.This Product Is Designed To Oem Specifications, It Can Works Perfectly With The Original Model..
【Note】：1" Bore With 1/4" Keyway; It Takes A 1 3/16 -1 1/4" Wide Belt; Never Run Clutch W/O A 1 3/16" - 1 1/4" Wide Belt Installed.
Features
- Compatible with Briggs Stratton Vanguards, Kohler Commands, Robin, Honda, Salsbury, CVTech, CVTech Powerbloc IBC and most other 4 cycle engines with crankshafts size listed above.
- Note 1 bore with 1/4 keyway; It takes a 1 3/16 -1 1/4 wide belt; Never run clutch w/o a 1 3/16 - 1 1/4 wide belt installed
- Replace Part Number :302405A 302405
- High Quality : Our products use high-quality raw materials and undergo rigorous testing.This product is designed to OEM specifications, it can works perfectly with the original model.
- Lifetime Warranty :Once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems
- See more on Amazon...
Brand: MiKaFex | Manufacturer: HangZhan
See On Amazon #17
Ziciner 3PCS Non-Slip Car Pedal Pads, Manual Gearbox Gas Pedal Brake Pedal Cover, Aluminum Alloy Brake Gas Clutch Pedal Kits, Universal Replacement Accessories for Car SUV ATV (Red&Manual)
Asin: B0CBTF49GK | Model: Car Pedal Pads | PartNumber: Car Pedal Pads
【Easy Installation】: Installation Of Car Pedals Is Very Simple And Does Not Require Drilling Holes In The Original Pedals At All. First You Need To Clean The Original Pedals, Install The Screws On The Pedal Cover (Don't Tighten Them Yet), And Then Install Them To The Original Pedal Surface, Securing The Screw Clips On The Back Of Them To The Original Pedals. Finally Tighten The Screws On The Pedal Cover Surface With A Screwdriver. Installation Is Complete!.
【Satisfactory Service】: Every One Of Our Products Is Tested And We Provide Quality And Friendly Service. If You Have Any Questions, Please Feel Free To Contact Us Through Your Order, Our Customer Service Team Will Provide You With Satisfactory Solutions Within 24 Hours..
【Widely Application】: The Brake/Clutch Pedal Cover Measures 3.54×2.6 Inches. The Gas Pedal Cover Measures 5.7×3.15 Inches. Clutch Pedal, Brake Pedal, Gas Pedal Cover Are All Included. Universal Fitment For Most Mt Vehicles, We Recommend You Check The Size Of Your Car's Pedals Before Purchasing To Make Sure There Are No Problems..
【Functional Features】: This Car Pedal Mat Is Not Only Practical But Also A Great Decorative Item. It Can Protect Your Car Pedal Surface From Abrasion And Prevent Slipping While Driving, And Also Has A Great Decorative Effect. With It, Your Car Will Look More Personalized While Adding Sporty And Fashionable Style, Improving Your Driving Experience And Making Your Journey Safer And More Enjoyable..
Features
- High-Quality Materials : This car pedal mat is made of high quality aluminum alloy and non-slip rubber, which is hard, wear-resistant, corrosion-resistant, and not easy to deform and break. It increases the pedal contact area and makes it easier for you to maneuver the pedal. The pedal surface is equipped with anti-slip bolts to prevent slipping and will not wear out and deform even after long time use.
- Functional Features : This car pedal mat is not only practical but also a great decorative item. It can protect your car pedal surface from abrasion and prevent slipping while driving, and also has a great decorative effect. With it, your car will look more personalized while adding sporty and fashionable style, improving your driving experience and making your journey safer and more enjoyable.
- Easy Installation : Installation of car pedals is very simple and does not require drilling holes in the original pedals at all. First you need to clean the original pedals, install the screws on the pedal cover (don't tighten them yet), and then install them to the original pedal surface, securing the screw clips on the back of them to the original pedals. Finally tighten the screws on the pedal cover surface with a screwdriver. Installation is complete!
- Widely Application : The brake/clutch pedal cover measures 3.54 2.6 inches. The gas pedal cover measures 5.7 3.15 inches. Clutch pedal, brake pedal, gas pedal cover are all included. Universal fitment for most MT vehicles, we recommend you check the size of your car's pedals before purchasing to make sure there are no problems.
- Satisfactory Service : Every one of our products is tested and we provide quality and friendly service. If you have any questions, please feel free to contact us through your order, our customer service team will provide you with satisfactory solutions within 24 hours.
- See more on Amazon...
Brand: Ziciner | Manufacturer: Ziciner
Warranty: 0.2
See On Amazon #18
2PCS Automobile Relay, 4-PIN 40/30AMP 12V DC Waterproof Relay, Car Air Conditioning Control Relay, Car A/C Radiator Fan Relay for Car Truck Automotive Replacement Accessories
Asin: B0C7B53ZQ6
[Specifications]: 4-Pin 12V 30A/40A Relay, Can Carry Large Current And Voltage Work, Can Meet Your Daily Use And Replacement..
[Easy To Use]: Car Air Conditioning Control Relay Is Simple To Operate, Just Connect The Relay With The Wire, Convenient For You To Use And Replace, Let Your Components Work Normally..
[Car A/C Radiator Fan Relay]: Adjust And Control The Temperature Inside The Car At Its Optimal State, Providing A Comfortable Driving Environment For Drivers And Passengers, And Reducing Driving Fatigue..
[Function]: The Function Of A Car Air Conditioning Relay Is To Control The Start And Stop Of The Air Conditioning. When The Temperature In The Car Reaches The Target Temperature, The Sensor Will Cause The Relay To Stop The Cooling Action Of The Air Conditioning. When The Temperature In The Car Exceeds The Target Temperature, The Sensor Will Activate The Cooling Action Of The Air Conditioning Relay..
Features
- [Material]: Automotive Relay is made of nylon shell material, brass pin material, can withstand hot and cold conditions, stable structure, not easy to fracture, deformation, rust, strong stability, it better protects the circuit.
- [Function]: The function of a car air conditioning relay is to control the start and stop of the air conditioning. When the temperature in the car reaches the target temperature, the sensor will cause the relay to stop the cooling action of the air conditioning. When the temperature in the car exceeds the target temperature, the sensor will activate the cooling action of the air conditioning relay.
- [Specifications]: 4-pin 12V 30A/40A relay, can carry large current and voltage work, can meet your daily use and replacement.
- [Car A/C Radiator Fan Relay]: Adjust and control the temperature inside the car at its optimal state, providing a comfortable driving environment for drivers and passengers, and reducing driving fatigue.
- [Easy to use]: Car Air Conditioning Control relay is simple to operate, just connect the relay with the wire, convenient for you to use and replace, let your components work normally.
- See more on Amazon...
Brand: Middrivr | Manufacturer: Middrivr
Dimensions: 0.79 x 1.54 x 0.98 inches
See On Amazon #19
Nilight Motorcycle Led Pods Amber Fog Lights 2PCS 3Inch Yellow round led offroad Built-in EMC Driving Lights w/ 18AWG DT Wiring harness Kit for Motorbike SUV ATV Truck Boat Tractor, 5 Years Warranty
Asin: B0BX9LFFTG | Model: W1210A | PartNumber: W1210A | Ean: 0840323902953 | UPC: 840323902953
【Build To Last】: Compared With The Traditional 3535 Chip, Our Light Pods Employ Top Osram Led Chips That Features Higher Lumen And Quality Built Gold Wire Bonding, Bringing 1600Lm Stable Output To Light Up The Entire Way Ahead. Gets You Less Light Decay Or Dead Leds, But A Long Lifespan 50,000+ Hours.
【Wide Application】: 3 Inch Pod Lights, Perfect For Motorcycle Auliary Lights, Round Led Driving Lights For Offroad Led Headlights Ditch Lights For Tractor, Replacement For Your Factory Fog Lights Of Front Or Back Bumper, Fog Light Hole, Bicycle Dirt Bike Suv Atv Truck Jeep Boat Tractor Forklift Etc.
【Straight Forward Electrical Hook-Up】 Comes With 18Awg Dt Connectors 2 Lead Wiring Harness Kit That Includes Switch Relay And Fuse All In One Set. Just Directly Plug And Play With Lights, Pretty Easy And Quick Hook Up. 5 Years Warranty Honored By Nilight..
【Full Directions Mountable】: Round Led Offroad Lights Comes With Adjustable Mounting Brackets, Can Freely Mount Horizontally Or Vertically Without Changing Lighting Effect.
【High Quality】: Built In Ip68 Waterproof, Powerful To Withstand Any Harsh Environments And Weather Conditions. Also Lights Are Built-In Emc For Emi/Rfi Protection, Resolve The Issue Of Radio Interference And Flickering.
Features
- BRIGHT AMBER FOG LIGHTS : Employ top Osram led chips, specially designed optical yellow lens and refractive cup, achieves a super focused 10 high intensity light beam, shoots a further distance at 453 Feet, providing you a more clearly and safe driving in foggy snowy, rainy weather, spot beam is focused but not scattered, prevent the fog/snow/dust from reflecting the light back into driver eyes
- High Quality : Built in IP68 waterproof, powerful to withstand any harsh environments and weather conditions. Also lights are built-in EMC for EMI/RFI protection, resolve the issue of radio interference and flickering
- Build To Last : Compared with the traditional 3535 chip, our light pods employ top Osram led chips that features higher lumen and quality built gold wire bonding, bringing 1600LM stable output to light up the entire way ahead. Gets you less light decay or dead leds, but a long lifespan 50,000+ hours
- Full Directions Mountable : Round led offroad lights comes with adjustable mounting brackets, can freely mount horizontally or vertically without changing lighting effect
- Wide Application : 3 inch pod lights, perfect for motorcycle auliary lights, round led driving lights for Offroad led headlights ditch lights for tractor, replacement for your factory fog lights of front or back bumper, fog light hole, bicycle dirt bike SUV ATV Truck Jeep Boat Tractor Forklift etc
- Straight Forward Electrical Hook-up Comes with 18AWG DT connectors 2 lead wiring harness kit that includes switch relay and fuse all in one set. Just directly plug and play with lights, pretty easy and quick hook up. 5 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Weight: 2.82 Pounds
Warranty: 5 years warranty.
See On Amazon #20
jokormo 3 PCS Car Manual Transmission Brake Pad Cover, Waterproof Anti-Slip Metal Vehicle Accelerator Pedal Decoration, Universal Durable Automotive Safty Accessories for Truck SUV Car (Silver)
Asin: B0CW5WZ8JM | Model: JOKJTB201SI-3PS | PartNumber: JOKJTB201SI-3PS
Product Parameters: The Car Pedal Kit Includes 1 X Clutch Pedal, 1 X Brake Pedal, And 1 X Accelerator Pedal. The Brake Pedal Measures 2.75In X 3.54In, The Clutch Pedal Measures 2.75In X 3.54In, And The Accelerator Pedal Measures 5.70In X 3.14In..
Note: The Car Pedal Kit Is Suitable For Use On Manual Transmission Type Vehicles. Before Purchasing, Please Measure The Dimensions Of Your Car's Pedals To Ensure Suitability. Note That The Number Of Pedals On Automatic Transmission Vehicles And Manual Transmission Vehicles Is Different..
Rotary Installation: There Are Screws On The Surface Of The Car Pedal, Which Can Be Easily Fixed Directly With A Screwdriver. The Car Pedal Kit Ensures That The Driver Maintains Perfect Control In All Kinds Of Bad Weather And Reduces The Risk Of Slipping..
Safety: The Car Pedal Kit Adopts An Anti-Slip Design, And The Curved Surface Can Perfectly Fit The Driver's Soles For Easy Control. The Surface Of The Car Pedal Kit Is Made Of Anti-Slip Rubber Material, Which Can Increase Friction, Expand The Original Pedal Area, And Enhance Safety Control Performance..
Features
- Metal Material: The car pedal set is made of metal material. The car pedal set has a fine and even texture, which is both decorative and practical. The bright colors can add a sense of fashion to the interior of the car, making it a perfect car decoration accessory.
- Safety: The car pedal kit adopts an anti-slip design, and the curved surface can perfectly fit the driver's soles for easy control. The surface of the car pedal kit is made of anti-slip rubber material, which can increase friction, expand the original pedal area, and enhance safety control performance.
- Product Parameters: The car pedal kit includes 1 x clutch pedal, 1 x brake pedal, and 1 x accelerator pedal. The brake pedal measures 2.75In x 3.54In, the clutch pedal measures 2.75In x 3.54In, and the accelerator pedal measures 5.70In x 3.14In.
- Rotary Installation: There are screws on the surface of the car pedal, which can be easily fixed directly with a screwdriver. The car pedal kit ensures that the driver maintains perfect control in all kinds of bad weather and reduces the risk of slipping.
- Note: The car pedal kit is suitable for use on manual transmission type vehicles. Before purchasing, please measure the dimensions of your car's pedals to ensure suitability. Note that the number of pedals on automatic transmission vehicles and manual transmission vehicles is different.
- See more on Amazon...
Brand: jokormo | Manufacturer: jokormo
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon
Looking For Something Else?
Search