VR Cooling Fan for Oculus Quest 2,A2 Pro Facial Interface with Air Circulation Fan and 2 Soft Pad,3 Speed Anti-Fogging Air Circulation Cooler Fan,Suitable for Workout & Intense VR Games
Asin: B0BFWLZ815
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.🍃【Easy To Install】-The Installation Has Never Been Easier! To Install The Face Cover, Just Ensure The Upper And Lower 4 Buckles Are Firmly Attached To The Headset And It Snaps The Headset Very Securely, Tightly, And Doesn’T Budge..
🍃【What You Can Get】-1Xair Circulation Fan,1Xfacial Interface,1Xlight-Proof Nose Pad,1Xpu Foam Pad,1X Ice Cotton Pad,1Xusb-C Cable,1Xuser Manual.Alcopanda Has Accessories Suitable For Quest 2,They Are The Perfect Gift For Quest 2 Players And Are Sure To Surprise Your Friends On Special Days Or Holidays Such As Birthdays,Christmas,Dates,Engagement Parties, Etc..
🍃【Soft & Skin-Friendly Pu】-It Contains A Pu Foam Pad And 1X Ice Cotton Pad, Which Can Be Used For Replacement And Easy To Remove And Clean. Soft Wicking Material Surface Pad, Will Not Block The Sensor..
🍃【Emergency Charging For Quest 2】-The Fan Has Two Built-In 800 Mah Batteries That Act As A Small Emergency Charger, Providing Emergency Charging When The Oculus/Meta Quest2 Battery Runs Out And Extending The Vr Goggles' Life By 30 Minutes..
🍃【Light-Proof Face Pad】-The Silicone Nose Pads Can Prevent Dust Or Light From Entering The Headset, Providing You With A Better View, What's More, Ultra-Lightweight Cooling Fan Doesn't Add Weight, Reduce The Burden On Your Head And Making The Vr Experience More Immersive.
🍃【3-Speeds & High-Power Battery】-The 3-Speed Fan For Different Types Of Game Modes, The Fan Has Two Built-In 800Mah Batteries That Can Last From 3-8 Hours Depending On How You Use Quest 2,And Takes Only One Hour To Fully Charge, Keeping The Lens Clean Whether You're Indoors Or Outdoors..
Features
- EFFECTIVELY RELIEVE FOG -The Alcopanda VR fan sucks the heat outside to accelerate air circulation so get your face cooler and less sweat, and stop the lens and glasses from fogging,makes you feel no airflow, avoid eye dry, keeps you cooling and provides you with better gaming immersion.
- 3-SPEEDS & HIGH-POWER BATTERY -The 3-speed fan for different types of game modes, the fan has two built-in 800mah batteries that can last from 3-8 hours depending on how you use quest 2,and takes only one hour to fully charge, keeping the lens clean whether you're indoors or outdoors.
- EASY TO INSTALL -The installation has never been easier! To install the face cover, just ensure the upper and lower 4 buckles are firmly attached to the headset and it snaps the headset very securely, tightly, and doesn t budge.
- LIGHT-PROOF FACE PAD -The silicone nose pads can prevent dust or light from entering the headset, providing you with a better view, what's more, ultra-lightweight cooling fan doesn't add weight, reduce the burden on your head and making the VR experience more immersive
- SOFT & SKIN-FRIENDLY PU -It contains a PU Foam Pad and 1x Ice Cotton Pad, which can be used for replacement and easy to remove and clean. Soft wicking material surface pad, will not block the sensor.
- EMERGENCY CHARGING FOR QUEST 2 -The fan has two built-in 800 mAh batteries that act as a small emergency charger, providing emergency charging when the Oculus/Meta Quest2 battery runs out and extending the VR goggles' life by 30 minutes.
- WHAT YOU CAN GET -1xAir Circulation Fan,1xFacial Interface,1xLight-Proof Nose Pad,1xPU Foam Pad,1x Ice Cotton Pad,1xUSB-C Cable,1xUser Manual.Alcopanda has accessories suitable for quest 2,they are the perfect gift for QUEST 2 players and are sure to surprise your friends on special days or holidays such as birthdays,Christmas,dates,engagement parties, etc.
- See more on Amazon...
Brand: alcopanda | Manufacturer: Shenzhen Jieruihong Electronics Co., Ltd.
Dimensions: 7.87 x 5.31 x 3.74 inches
See On Amazon Similar To VR Cooling Fan for Oculus
#1
Bioherm RGB Head Strap with Battery for Oculus Quest 2, 10000mAh Battery Pack for Extended 8 Hrs of Playtime, Fast Charging VR Power, Adjustable Elite Strap Enhanced Support and Balance in VR
Asin: B0BY117HNC | Model: Q8L | PartNumber: Q8L | Ean: 0731041270984 | UPC: 731041270984
Relaxed And Comfortable: Our Battery Pack For Meta Quest 2 Has A 52° Adjustable Hinge, Making It Easy To Take Off And Put On. It Also Comes With A Tpr High-Quality Material Head Pad That Enhances Breathability And Water Absorption, So You Can Enjoy An Immersive Gaming Experience In Comfort, 360° Rotatable Knob For Players Of All Head Sizes..
Lightweight And Portable: Our Head Strap Battery Accessories For Meta Quest 2Weighs Only 12.7Oz, Making It Easy To Carry Around In The Official Quest 2 Carrying Case Or Any Other Carrying Case In The Market. Enjoy The Fun Of Vr Gaming Anytime, Anywhere..
Safety Protection: Our Vr Headset For Oculus Quest 2 Are Equipped With Multiple Safety Protection Systems Including Overheat Protection, Overcharge Protection And Overvoltage Protection To Ensure The Safety Of You And Your Quest 2 While Using This Product, The Indicator Light Allows You To Check The Battery Level At Any Time..
Durable And Eco-Friendly: Our Oculus Quest 2 Accessories Side Straps Are Made From Upgraded Nylon Pa Material, Which Is Harder And More Durable Than Abs Material. It Can Bend More Than 10,000 Times Without Breaking. Plus, Our Material Is Eco-Friendly And Safer For The Environment..
Features
- Extended Playtime: With a high-capacity 10000mAh battery, our VR accessories allows you to extend your Oculus Quest 2 playtime by up to 8 hours. Enjoy your favorite VR games and apps without worrying about running out of battery.
- Durable and Eco-Friendly: Our oculus quest 2 accessories side straps are made from upgraded nylon PA material, which is harder and more durable than ABS material. It can bend more than 10,000 times without breaking. Plus, our material is eco-friendly and safer for the environment.
- Relaxed and Comfortable: Our battery pack for meta quest 2 has a 52 adjustable hinge, making it easy to take off and put on. It also comes with a TPR high-quality material head pad that enhances breathability and water absorption, so you can enjoy an immersive gaming experience in comfort, 360 rotatable knob for players of all head sizes.
- Safety Protection: Our VR headset for oculus quest 2 are equipped with multiple safety protection systems including overheat protection, overcharge protection and overvoltage protection to ensure the safety of you and your Quest 2 while using this product, the indicator light allows you to check the battery level at any time.
- Lightweight and Portable: Our head strap battery accessories for meta quest 2weighs only 12.7oz, making it easy to carry around in the official Quest 2 carrying case or any other carrying case in the market. Enjoy the fun of VR gaming anytime, anywhere.
- See more on Amazon...
Brand: bioherm | Manufacturer: Bioherm
Dimensions: 4.45 x 7.67 x 4.72 inches | Weight: 0.79 Pounds
Warranty: one year
See On Amazon #2
DESTEK Cooling Face Pad Compatible with Quest 2, Including Facial Interface and Removable Nose Guard - Accessories for Oculus/Meta Quest 2 - Face Cushion Face Cover Replacement
Asin: B0CF8MM6G4
Pressure-Free Fit, Extended Playtime: Enjoy Extended Playtime Without Discomfort. Our Gel Face Pad Is Designed To Provide A Pressure-Free Fit, Allowing For Immersive Gaming Sessions..
Fantastic Fit And Comfort: The Facial Interface For Oculus Quest 2 Offers An Improved Fit And Comfort. Its Ergonomic Design Ensures A Secure Fit And Reduces Discomfort, Allowing For Longer And More Enjoyable Vr Sessions..
Optimal Hygiene, Easy Maintenance: Maintain Optimal Hygiene With Our Premium Gel Face Cover For Oculus Quest 2. Easy To Clean And Maintain, It Offers Long-Lasting Freshness. Keep Your Vr Experience Clean And Enjoyable..
Superior Ease, Reduced Sweat: Say Goodbye To Discomfort And Excessive Sweating With Our Ice-Cool Quest 2 Face Pad. The Soft And Breathable Material Ensures Optimal Airflow, Keeping You Cool And Dry During Intense Gameplay..
Features
- DESTEK Patented Item: Enhance your Quest 2 experience with our Ice-cool Gel face pad. Innovative material designed specifically for Oculus Quest 2, our face cushion provides a comfortable and supportive fit for extended gaming sessions.
- Superior Ease, Reduced Sweat: Say goodbye to discomfort and excessive sweating with our ice-cool Quest 2 Face Pad. The soft and breathable material ensures optimal airflow, keeping you cool and dry during intense gameplay.
- Pressure-Free Fit, Extended Playtime: Enjoy extended playtime without discomfort. Our gel face pad is designed to provide a pressure-free fit, allowing for immersive gaming sessions.
- Optimal Hygiene, Easy Maintenance: Maintain optimal hygiene with our premium gel face cover for Oculus Quest 2. Easy to clean and maintain, it offers long-lasting freshness. Keep your VR experience clean and enjoyable.
- Fantastic Fit and Comfort: The facial interface for Oculus Quest 2 offers an improved fit and comfort. Its ergonomic design ensures a secure fit and reduces discomfort, allowing for longer and more enjoyable VR sessions.
- See more on Amazon...
Brand: DESTEK | Manufacturer: SHENZHEN XINLIANYOUPIN TECHNOLOGY CO.,LIMITED
See On Amazon #3
KKCOBVR K2 Face Cover with PU Leather Facial Interface Compatible with Meta Quest 2 Accessories Fan Cooler, Relieve Lens Fogging and Replace Fits with Oculus Quest 2 Elite Head Strap
Asin: B09V548ZXK
Comfortable Leather Face Pad： K2 Cooling Fan Adopts A Leather Face Pad That Will Not Block The Quest2 Sensor.Velcro Design, Easy To Take Off And Clean..
Increase Space: K2 Face Cover Reserves Enough Space For Myopia Glasses. At The Same Time, K2 Will Not Reduce Fov..
Prevent Light Leakage: K2 Has Ergonomic Nose Pads To Ensure The Comfort Of Use And Prevent Light From Entering. After Installation, The K2 Facial Interface Is Stronger Than The Official Face Cover Cushion And Not Easy To Fall Off..
Reduce Face Pressure: K2 Cooling Fan For Oculus Quest2 Disperses The Pressure On The Face To The Forehead, Making Your Face More Comfortable..
Features
- BUILD-IN DEFOGGING FAN: K2 face interface pad with quest2 fan will not make your eyes dry while removing the mist and support 2 mode adjustments. Mode 1 K2 oculus fan keeps blowing(suitable for playing intense games);Mode 2: K2 quest2 fan blows for 5 seconds, stops for 5 seconds, and keeps working in cycles (suitable for movie or chat).
- REDUCE FACE PRESSURE: K2 cooling fan for oculus quest2 disperses the pressure on the face to the forehead, making your face more comfortable.
- COMFORTABLE LEATHER FACE PAD K2 cooling fan adopts a leather face pad that will not block the quest2 sensor.Velcro design, easy to take off and clean.
- PREVENT LIGHT LEAKAGE: K2 has ergonomic nose pads to ensure the comfort of use and prevent light from entering. After installation, the K2 facial interface is stronger than the official face cover cushion and not easy to fall off.
- INCREASE SPACE: K2 face cover reserves enough space for myopia glasses. At the same time, K2 will not reduce FOV.
- See more on Amazon...
Brand: kkcobvr | Manufacturer: kkcobvr
Dimensions: 3.94 x 7.01 x 5.47 Inches
See On Amazon #4
VR Face Cover with Soft Leather Pad for Oculus/Meta Quest 2 Accessories, Facial Interface with Cooling Fan to Relieve Lens Fogging and Hot Air White
Asin: B09TJ8165C | Model: GAME-YX-676 | PartNumber: GAME-YX-676 | Ean: 0752859195221 | UPC: 752859195221
Easy To Install & Take Off: The Cooling Vr Face Cover Is Easy To Install And Take Off, And Fit Well Oculus Quest 2/ Meta Quest 2 Headset, Light Weight And Adopts Eco-Friendly Plastic Materials..
Fit With Meta Quest 2 Head Straps: The Vr Facial Cover Accessories Compatible With Elite Strap And Most Of 3Rd Head Straps. If There Are Any Dissatisfy, Contact Us Freely, We Will Repsond You Within 24 Hours..
Better Game Expenrience: The Fan Build-In 500Mah Battery, Can Continue Works Arround 6 Hrs, Keep Your Lens Clear And Eye Dry All The Time. By The Way, The Ergonomic Nose Pads Ensure Comfort And Prevent Light Leakage..
Replace Quest 2 Cover: The Facial Cover Come With Soft Leather Pad, And More Comfortable Than Original Cushion. The Face Cover Keep Enough Space For Myopia Glass, And Without Limits Fov..
Features
- KEEP LENS CLEAR ALL THE TIME: The facial cover with mini fan, support two modes setting, one is keep flowing all the time,can sucks enough air to prevent fogging during the most intense game play. Second mode is working 5 seconds, stops for 5 seconds, suitable for watching moive.
- REPLACE QUEST 2 COVER: The facial cover come with soft leather pad, and more comfortable than original cushion. The face cover keep enough space for myopia glass, and without limits FOV.
- EASY TO INSTALL & TAKE OFF: The cooling VR face cover is easy to install and take off, and fit well Oculus Quest 2/ Meta Quest 2 headset, light weight and adopts eco-friendly plastic materials.
- BETTER GAME EXPENRIENCE: The fan build-in 500mah battery, can continue works arround 6 hrs, keep your lens clear and eye dry all the time. By the way, the ergonomic nose pads ensure comfort and prevent light leakage.
- FIT WITH Meta Quest 2 HEAD STRAPS: The VR Facial Cover accessories compatible with elite strap and most of 3rd head straps. If there are any dissatisfy, contact us freely, we will repsond you within 24 hours.
- See more on Amazon...
Brand: Ponhu | Manufacturer: Ponhu
See On Amazon #5
NVNV VR Fan for Oculus Quest 2,Anti-fogging Air Circulation Cooler Fan with Facial Interface,Sweat-Proof Face Cover,VR Accessories for Quest 2, Suitable for Fitness,Workout & Intense VR Games,White
Asin: B0BY8R1M6R | Ean: 0771077465954 | UPC: 771077465954
Led Screen Display: The Top Interface Is Equipped With An Led Display Showing The Remaining Power And Wind Speed.
What You Get: Turbo Fan X 1, Facial Interface X 1, Type-C Cable, Cleaning Cloth, Anti-Light Nose Pad. Our Worry-Free 12-Month Warranty, And Friendly Customer Service.
Adjustable Wind Speed: Different Scene Types Use The Right Mode To Get A Longer Battery Life. Speed 1 Mode Is For Movie Watching, Speed 2 Mode Is For Normal Games, And Speed 3 Mode Is For Fitness, Workout And Intense Games. Equipped With 500 Mah Battery And Type C Charging Port, 0% To 100% In 45 Minutes. A Full Charge Lasts 3-6 Hours.
More Comfortable Virtual Reality Experience: Thicker 0.63-Inch Cushion Provides A Softer And More Comfortable Wearing Experience Than The Original; Pu Leather Material Is Easy To Clean And Breathable. No "Vr Face" Even After Hours Of Intense Vr Sessions.
Features
- Fogging solution: Equipped with mini turbo fan and additional cooling channels at the top and bottom of the face interface, the excellent air duct design effectively improves air circulation efficiency, removes heat and humidity, and prevents internal heat buildup
- More comfortable virtual reality experience: thicker 0.63-inch cushion provides a softer and more comfortable wearing experience than the original; PU leather material is easy to clean and breathable. No VR face even after hours of intense VR sessions
- LED screen display: The top interface is equipped with an LED display showing the remaining power and wind speed
- Adjustable wind speed: Different scene types use the right mode to get a longer battery life. Speed 1 mode is for movie watching, speed 2 mode is for normal games, and speed 3 mode is for fitness, workout and intense games. Equipped with 500 mAh battery and type C charging port, 0% to 100% in 45 minutes. A full charge lasts 3-6 hours
- What you get: turbo fan x 1, facial interface x 1, Type-c cable, cleaning cloth, anti-light nose pad. our worry-free 12-month warranty, and friendly customer service
- See more on Amazon...
Brand: NVNV | Manufacturer: NVNVVR
Dimensions: 3.35 x 7.28 x 4.53 inches
See On Amazon #6
CyberpowerPC Gamer Xtreme VR Gaming PC, Intel Core i7-12700F 2.1GHz, GeForce RTX 3060 12GB, 16GB DDR4, 1TB NVMe SSD, WiFi & Win 11 Home (GXiVR8040A12), Black
Asin: B0B7872PZR | Model: GXiVR8040A12 | PartNumber: GXiVR8040A12 | Ean: 0811842076838 | UPC: 811842076838
Connectivity: 6 X Usb 3.1 | 2 X Usb 2.0 | 1X Rj-45 Network Ethernet 10/100/1000 | 802.11Ac Wi-Fi | Audio: 7.1 Channel | Keyboard And Mouse.
1 Year Parts And Labor | Free Lifetime Tech Support.
Special Feature: Tempered Glass Side Case Panel | Custom Rgb Case Lighting | 7 Colors Rgb Gaming Mouse.
Graphics: Nvidia Geforce Rtx 3060 12Gb Video Card | 1X Hdmi | 2X Displayport.
Features
- System: Intel Core i7-12700F 2.1GHz 8plus4 Cores | Intel B660 Chipset | 16GB DDR4 | 1TB PCIe NVMe SSD | Genuine Windows 11 Home 64-bit
- Graphics: NVIDIA GeForce RTX 3060 12GB Video Card | 1x HDMI | 2x DisplayPort
- Connectivity: 6 x USB 3.1 | 2 x USB 2.0 | 1x RJ-45 Network Ethernet 10/100/1000 | 802.11AC Wi-Fi | Audio: 7.1 Channel | Keyboard and mouse
- Special feature: Tempered Glass Side Case Panel | Custom RGB Case Lighting | 7 Colors RGB Gaming Mouse
- 1 year parts and labor | Free lifetime tech support
- See more on Amazon...
First Available: 07/21/2022
Brand: CyberpowerPC | Manufacturer: CYBERPOWERPC
Warranty: 1 Year Parts & Labor Warranty Free Lifetime Tech Support
See On Amazon #7
HiBloks Face Cover Cooling Fan for Meta Quest 3 Accessories, Breathable Ice Silk Cotton Compatible with Oculus Quest 3 Fan Cooler Active Air Circulation Ventilation to Relieve Lens Fogging (2 Speeds)
Asin: B0CS91H8D8
🌼🌼Separable Face Pad: The Quest 3 Face Cover Pad Material Is Made Of Breathable Ice Silk Cotton, Skin-Friendly And Cool Fabric, Filled With Sweat-Absorbing Sponge, Breathable And Opaque, The Wind Can Blow Into The Face Cover Through The Sponge To Take Away The Accumulated Heat. And The Size Is Wider And Thicker To Better Fit The Facial Contour, With A Larger Contact Area, Effectively Reducing The Pressure On The Head, More Softer And Comfortable.
🎁🎁Best Gift: This Set Contains A Soft Face Cover And A Cooling Fan, Reduce Stress On Your Face And Makes Your Lens Clear. For Anyone Who Enjoys Playing Quest 3, It's The Best Gift For Special Days Or Holidays Such As Birthdays, Christmas, Dates, Engagement Parties And More. If You Are Not Satisfied With This Quest 3 Accessories For Any Reason, Please Feel Free To Contact Us, We Will Do Our Best To Answer You!.
✨✨Easy To Install & Remove: The Cooling Fan For Quest 3 Weights Less Than 60G, Much Lighter Than Others, No Obvious Weight Gain After Wearing, And Does Not Squeeze The Forehead. Snap-On Design, Easy To Install And Take Off, Align Quest 3 Radiator With The Two Holes On Top Of The Face Cover And Insert It. And It Applicable To All Types Of Head Straps, Including Elite And 3-Party Straps. Also Comes With A Booster Cushion To Accommodate Spectacle Wearers.
🌠🌠2-Speeds & High-Power Battery: This Cooling Fan For Oculus Quest 3 Has A Total Of Two Gears: ⅰ Is To Simulate Natural Wind, Noiseless, Effectively Prevent Lens Fogging In Winter Or Air-Conditioned Environments, ⅱ Is For Strong Wind To Bring A Cooler Feeling. And The Fan Build-In 700Mah Battery, Can Use 2 Hours 40 Minutes (Ii Gear) To 3 Hours 30 Hours (I Gear), And It Only Takes An Hour To Fully Charge, Keep Your Lens Clear All The Time Whether You Are Indoors Or Outdoors.
Features
- COOLING DEFOGGING FAN: HiBloks cooling fan is an anti-fog upgrade designed for Meta Quest 3, it adopts peripheral wraparound and bottom matrix openings, which can have more air inlets and provide more air volume to the fan, keeps you cooling, sweatproof, makes your lens clear, prevent fogging during the most intense game play. And air-dispersing cotton has been added to avoid blowing directly into your eyes
- 2-SPEEDS & HIGH-POWER BATTERY: This cooling fan for oculus quest 3 has a total of two gears: is to simulate natural wind, noiseless, effectively prevent lens fogging in winter or air-conditioned environments, is for strong wind to bring a cooler feeling. And the fan build-in 700mah battery, can use 2 hours 40 minutes (II gear) to 3 hours 30 hours (I gear), and it only takes an hour to fully charge, keep your lens clear all the time whether you are indoors or outdoors
- SEPARABLE FACE PAD: The Quest 3 face cover pad material is made of breathable ice silk cotton, skin-friendly and cool fabric, filled with sweat-absorbing sponge, breathable and opaque, the wind can blow into the face cover through the sponge to take away the accumulated heat. And the size is wider and thicker to better fit the facial contour, with a larger contact area, effectively reducing the pressure on the head, more softer and comfortable
- EASY TO INSTALL & REMOVE: The cooling fan for Quest 3 weights less than 60g, much lighter than others, no obvious weight gain after wearing, and does not squeeze the forehead. Snap-on design, easy to install and take off, align Quest 3 radiator with the two holes on top of the face cover and insert it. And it applicable to all types of head straps, including Elite and 3-party straps. Also comes with a booster cushion to accommodate spectacle wearers
- BEST GIFT: This set contains a soft face cover and a cooling fan, reduce stress on your face and makes your lens clear. For anyone who enjoys playing Quest 3, it's the best gift for special days or holidays such as birthdays, Christmas, dates, engagement parties and more. If you are not Satisfied with this Quest 3 accessories for Any Reason, please feel free to contact us, we will do our best to answer you!
- See more on Amazon...
Brand: HIBLOKS | Manufacturer: HiBloks
See On Amazon #8
Hibloks Quest 2 Fan Cooling Mask for Meta/Oculus Quest 2 Accessories, Circulated Ventilation Eliminates Glasses Fogging Defogger (Soft Lycra Cotton Mask)
Asin: B0B4FN1YTG | Model: Quest 2 Face Cover | PartNumber: Quest 2 Face Cover
🌡【Cool & Noise Reduction】The Cooler Fan Has 2 Built-In Turbo Blades, 2 Speeds Are Adjustable, And The 700Mah Battery Lasts For 3.5 Hours. While Providing Fan Cooler, The Noise Is Also Less Than 43~50.6Bb. Perfect Experience For The Wearer.
☎☎Satisfactory Service: If You Are Not Satisfied With Any Hibloks Product For Any Reason, You Can Contact Us For A Free Replacement Or 100% Money Back Guarantee. 4 Easy Step To Contact Us ：1. Look For Your Order List On Amazon / 2. Click ‘ Get Help With Order ’/ 3. Choose Your Email Subject / 4. Write The Message And Click ‘ Send An E-Mail ’. Any Problem Feel Free To Contact Us ,We Will Replay You Without 24 Hours.
🔧【Lightweight & Installation】The Oculus Quest 2 Cooling Fan Is Only 59.7G In Weight. The Face Cover Can Improve The Experience Of Vr Users. It Is Easy To Install On The Upgraded Face Cover. Align The Radiator With The Two Holes On Top Of The Face Cover And Insert It.
🧠【High Mask Compatibility】The Face Cushion Is Compatible With Oculus Quest 2 / Meta Quest 2. The Width Of The Oculus Face Pad Is 6.93 Inches. The Material Is Made Of Silicone Skin-Friendly Lycra Surface, Which Is Easy To Clean And Breathable, And Is More Suitable For Long-Term Wearing. It Is Also A Good News Myopia , The Mask Leaves Enough Room For Myopia Lenses.
Features
- Upgraded Oculus Quest 2 Fan Temperature Control/Settings Specially designed for anti-fog and anti-sweat, the oculus fan has two wind speed modes, always keep the lens clear and eyes refreshed during wearing, making the VR experience more enjoyable
- High Mask Compatibility The face cushion is compatible with Oculus Quest 2 / Meta Quest 2. The width of the oculus face pad is 6.93 inches. The material is made of silicone skin-friendly Lycra surface, which is easy to clean and breathable, and is more suitable for long-term wearing. It is also a good news myopia , the mask leaves enough room for myopia lenses
- Cool & Noise Reduction The cooler fan has 2 built-in turbo blades, 2 speeds are adjustable, and the 700mah battery lasts for 3.5 hours. While providing fan cooler, the noise is also less than 43~50.6bB. perfect experience for the wearer
- Lightweight & Installation The oculus quest 2 cooling fan is only 59.7g in weight. The face cover can improve the experience of vr users. It is easy to install on the upgraded face cover. align the radiator with the two holes on top of the face cover and insert it
- Satisfactory Service: If you are not Satisfied with any Hibloks product for Any Reason, you can contact us for a free replacement or 100% MONEY BACK GUARANTEE. 4 easy step to contact us 1. Look for your order list on Amazon / 2. Click Get help with order / 3. Choose your email subject / 4. Write the message and click Send an e-mail . Any problem feel free to contact us ,we will replay you without 24 hours
- See more on Amazon...
Brand: RCstyle | Manufacturer: RCstyle
Weight: 0.13 pounds
See On Amazon #9
Sonicgrace Fan for Meta/Oculus Quest 2 - Face Pad Cover with Cooling Fan for Oculus Quest 2, 4 Speed Anti-Fog Air Ventilation VR Fan Cooler for Oculus Quest 2 Accessories
Asin: B0BZRD8Y5X | Model: FQ2-04 | PartNumber: FQ2-04 | Ean: 0884945006330 | UPC: 884945006330
[Adjustable Four-Speed Mode] This Meta Quest 2 Fan Cooler Has A 4-Speed Mode To Adapt Different Application Scenarios. Mode 1 Breeze Suitable For Watching Movies; Mode 2 For Light Sports Games; Mode 3 For Strenuous Sports Games; And Mode 4 Is A Low To High Wind Speed Cycle. If The Power Is Turned On Again, The Mode Before The Shutdown Will Be Restored By Default..
[Simple Installation] The Snap-On Design Allows You To Install And Remove This Oculus 2 Fan Cooler In Just A Few Steps. The Face Cushion For Quest 2 Also Makes It Easy To Remove And Clean Due To The Velcro Design, Keeping Your Vr Gaming Experience Enjoyable..
[Better Game Expenrience] Our Meta Quest 2 Fan Built-In A 600Mah Battery, Can Continue Works Arround 5 Hours, Keeping Your Lenses Clear And Your Face Dry During Vr Games. It Is Lightweight And Does Not Compress The Forehead When Worn And It Also Reserves Enough Space For Myopia Glasses..
[Comfortable Face Pad] Oculus Quest 2 Face Cover With Cooling Fan Is Made Of High Quality Soft Foam Leather, Filled With Sponge For A Softer And More Comfortable Wearing Experience, Easy To Clean And Breathable, Reducing Odor. Also, Equipped With Ergonomic Nose Pad To Ensure The Comfort Of Use And Effectively Improving The Problem Of Light Leakage..
Features
- [Dual Powerful Fan] Compared to a single fan system, our quest 2 fan is more powerful and efficient with a dual micro turbo fan system. Adpots the top air inlet and bottom air outlet design to improve facial air circulation, help you completely get rid of the lens fogging and face sweat trouble. The upgraded air outlet will prevent the fan blowing directly into your eyes and not drying them out.
- [Comfortable Face Pad] Oculus Quest 2 face cover with cooling fan is made of high quality soft foam leather, filled with sponge for a softer and more comfortable wearing experience, easy to clean and breathable, reducing odor. Also, equipped with ergonomic nose pad to ensure the comfort of use and effectively improving the problem of light leakage.
- [Adjustable Four-speed Mode] This Meta Quest 2 fan cooler has a 4-speed mode to adapt different application scenarios. Mode 1 breeze suitable for watching movies; mode 2 for light sports games; mode 3 for strenuous sports games; and mode 4 is a low to high wind speed cycle. If the power is turned on again, the mode before the shutdown will be restored by default.
- [Better Game Expenrience] Our meta quest 2 fan built-in a 600mAh battery, can continue works arround 5 hours, keeping your lenses clear and your face dry during vr games. It is lightweight and does not compress the forehead when worn and it also reserves enough space for myopia glasses.
- [Simple Installation] The snap-on design allows you to install and remove this Oculus 2 fan cooler in just a few steps. The face cushion for Quest 2 also makes it easy to remove and clean due to the Velcro design, keeping your VR gaming experience enjoyable.
- See more on Amazon...
Brand: Sonicgrace | Manufacturer: Sonicgrace, Inc.
Dimensions: 3.15 x 6.81 x 4.49 inches
See On Amazon #10
HiBloks Cooling Fan Face Cover for Meta/Oculus Quest 2 Accessories, Soft Lycra Cotton, Quest 2 Cooling Fan Active Air Circulation Ventilation to Relieve Lens Fogging (2 Speeds)
Asin: B0B4FR91KS
✿✿Comfortable Face Pad: The Quest 2 Cooling Fan Material Is Made Of Skin-Friendly And Cool Fabric, Filled With Sweat-Absorbing Sponge, Breathable And Opaque, The Wind Can Blow Into The Face Cover Through The Sponge To Take Away The Accumulated Heat. And The Size Is Widened To Better Fit The Facial Contour, With A Larger Contact Area, Effectively Reducing The Pressure On The Head, More Softer And Comfortable.
〠〠Best Gift: This Set Contains A Soft Face Cover And A Cooling Fan, Reduce Stress On Your Face And Makes Your Lens Clear, Is A Perfect Gift For Man And Woman Who Like To Play With Quest 2 On Special Days Or Holidays, Such As Birthdays, Christmas, Dates, Engagement Parties, Etc. If You Are Not Satisfied With This Quest 2 Accessories For Any Reason, Please Feel Free To Contact Us, We Will Do Our Best To Answer You!.
✄✄Easy To Install & Remove: The Cooling Fan For Quest 2 Weighs Less Than 60G, Much Lighter Than Others, No Obvious Weight Gain After Wearing, And Does Not Squeeze The Forehead. Snap-On Design, Easy To Install And Take Off, Align Quest 2 Radiator With The Two Holes On Top Of The Face Cover And Insert It. And It Applicable To All Types Of Head Straps, Including Elite And 3-Party Straps.
★★2-Speeds & High-Power Battery: This Cooling Fan For Oculus Quest 2 Has A Total Of Two Gears: ⅰ Is To Simulate Natural Wind, Noiseless, Effectively Prevent Lens Fogging In Winter Or Air-Conditioned Environments, ⅱ Is For Strong Wind To Bring A Cooler Feeling. And The Fan Build-In 700Mah Battery, Can Use 2 Hours 40 Minutes (Ii Gear) To 3 Hours 30 Hours (I Gear), And It Only Takes An Hour To Fully Charge, Keep Your Lens Clear All The Time Whether You Are Indoors Or Outdoors.
Features
- COOLING DEFOGGING FAN: HiBloks face cover pad is an anti-fog upgrade designed for Quest 2, it adopts peripheral wraparound and bottom matrix openings, which can have more air inlets and provide more air volume to the fan, not making your eye dry, keeps you cooling, sweatproof, and makes your lens clear, prevent fogging during the most intense game play
- 2-SPEEDS & HIGH-POWER BATTERY: This cooling fan for oculus quest 2 has a total of two gears: is to simulate natural wind, noiseless, effectively prevent lens fogging in winter or air-conditioned environments, is for strong wind to bring a cooler feeling. And the fan build-in 700mah battery, can use 2 hours 40 minutes (II gear) to 3 hours 30 hours (I gear), and it only takes an hour to fully charge, keep your lens clear all the time whether you are indoors or outdoors
- COMFORTABLE FACE PAD: The Quest 2 cooling fan material is made of skin-friendly and cool fabric, filled with sweat-absorbing sponge, breathable and opaque, the wind can blow into the face cover through the sponge to take away the accumulated heat. And the size is widened to better fit the facial contour, with a larger contact area, effectively reducing the pressure on the head, more softer and comfortable
- EASY TO INSTALL & REMOVE: The cooling fan for Quest 2 weighs less than 60g, much lighter than others, no obvious weight gain after wearing, and does not squeeze the forehead. Snap-on design, easy to install and take off, align Quest 2 radiator with the two holes on top of the face cover and insert it. And it applicable to all types of head straps, including Elite and 3-party straps
- BEST GIFT: This set contains a soft face cover and a cooling fan, reduce stress on your face and makes your lens clear, is a perfect gift for man and woman who like to play with Quest 2 on special days or holidays, such as birthdays, Christmas, dates, engagement parties, etc. if you are not Satisfied with this Quest 2 accessories for Any Reason, please feel free to contact us, we will do our best to answer you!
- See more on Amazon...
Brand: RCGEEK | Manufacturer: HiBloks
Weight: 0.13 pounds
Warranty: 12 month
See On Amazon #11
VR Face Cover Fan Accessories Head Strap
Asin: B0B7N57GYF | Model: FQ2-02 | PartNumber: FQ2-02
🥽Reduce Face Pressure: The Cooling Fan Material Is Made Of Soft Leather Fabric, Filled With A Sweat-Absorbing And Breathable Sponge, And The Wind Can Blow Into The Mask Through The Sponge To Take Away The Hot Air Inside. The Head Strap Cooling Fan Distributes Face Pressure To The Forehead, Making Your Face More Comfortable And Preventing Light From Entering, And The Mask Leaves Enough Space For Myopia With The Unrestricted Field Of View..
🎁Best Gift: The Set Contains 1 Soft Face Cover, 1 Cooling Fan, 1 Cleaning Cloth, 1 Charging Cord, And 2 Nose Pieces Of Different Sizes. This Is The Perfect Gift For Little Kids, Men, And Women Who Love To Play Vr Game On Special Days, Big Parties, Or Holidays, Such As Birthdays, Christmas, Special Holidays, And More..
🎮Easy To Install & Remove: Our Cooling Fan Is Lightweight, Adds No Noticeable Weight To The Wearer, And Doesn't Squeeze Your Head. Both Ends Of The Fan Are Equipped With A Snap-On Design, Align And Insert The Vr Cooling Fan With The Two Holes On The Top Of The Cover..
🔋Adjustable Wind Speed: This Vr Cooling Fan Head Strap Has 3 Gears, Touch The Switch Button To Adjust The Fan Speed. The 1St Gear Is Noiseless And The Minimum Wind Power Prevents The Lens From Fogging, The 2Nd Gear Is Medium Wind Power Brings A Cool Feeling, And The 3Rd Gear's Super Strong Wind Power Will Not Feel Hot When You Play Games. The Fan Has A Built-In 600Mah Battery, Which Can Be Used For 1.5 Hours (Iii Gear) To 4 Hours (I Gear), And Can Be Fully Charged In Just One Hour..
Features
- COOLING DEFOGGING CIRCULATION FAN: The HAMOPY face cover pad is specially designed for VR face cover head strap 2, the wrap-around design fits perfectly, and the air volume provided by the cooling fan will not dry your eyes when defogging, keeping you cool and sweat-proof, Keep your footage clear with enough air to prevent fogging during the most intense gaming sessions.
- ADJUSTABLE WIND SPEED: This VR cooling fan head strap has 3 gears, Touch the switch button to adjust the fan speed. The 1st gear is noiseless and the minimum wind power prevents the lens from fogging, the 2nd gear is medium wind power brings a cool feeling, and the 3rd gear's super strong wind power will not feel hot when you play games. The fan has a built-in 600mAh battery, which Can be used for 1.5 hours (III gear) to 4 hours (I gear), and can be fully charged in just one hour.
- REDUCE FACE PRESSURE: The cooling fan material is made of soft leather fabric, filled with a sweat-absorbing and breathable sponge, and the wind can blow into the mask through the sponge to take away the hot air inside. The head strap cooling fan distributes face pressure to the forehead, making your face more comfortable and preventing light from entering, and the mask leaves enough space for myopia with the unrestricted field of view.
- EASY TO INSTALL & REMOVE: Our cooling fan is lightweight, adds no noticeable weight to the wearer, and doesn't squeeze your head. Both ends of the fan are equipped with a snap-on design, align and insert the vr cooling fan with the two holes on the top of the cover.
- BEST GIFT: The set contains 1 soft face cover, 1 cooling fan, 1 cleaning cloth, 1 charging cord, and 2 nose pieces of different sizes. This is the perfect gift for little kids, men, and women who love to play vr game on special days, big parties, or holidays, such as birthdays, Christmas, special holidays, and more.
- See more on Amazon...
Brand: HAMOPY | Manufacturer: Xinxu Liansheng Plastic Products Factory
Dimensions: 7.40 x 4.70 x 3.50 Inches
See On Amazon #12
VIYISI Battery Pack for Oculus Quest 2, 5000mAh Portable Charger for Meta Quest, Power Bank for VR Accessories Extend Extra 2-4 Playtime
Asin: B0BQ3R76HL | Model: W0563 | PartNumber: W0563
𝗦𝗮𝗳𝗲 𝗮𝗻𝗱 𝗙𝗮𝘀𝘁𝗲𝗿 𝗖𝗵𝗮𝗿𝗴𝗶𝗻𝗴: Safety-Certified Battery Pack For Meta Quest 2. The Battery Pack Has 5V/2A Input/Output, Which Can Charge Meta Quest 2 Faster..
𝗪𝗶𝗱𝗲 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻: Compatible With Quest 2, Meta Quest, And Other Devices With Type-C Connector. It Only Takes 2-3 Hours To Fully Charge The Battery Pack. Great Meta Quest 2 Accessories For Vr Game Lovers..
𝗪𝗵𝗮𝘁 𝗬𝗼𝘂 𝗚𝗲𝘁: Viyisi Portable Charger For Oculus Quest 2 × 1, Usb A To Usb C Cable × 1, User Manual × 1. Worry-Free 24-Month Warranty And 7-Day / 24H Friendly Customer Service..
𝗚𝗿𝗲𝗮𝘁 𝗗𝗲𝘀𝗶𝗴𝗻: This Battery Pack Uses The Same Color Scheme As The Quest 2, So That There Is No Sense Of Incongruity After The Battery Is Plugged In And Charged. It's Compact And Lightweight, And Will Not Let You Feel Weight Increase Or The Pressure On Your Face. It Will Not Damage Your Headset Type C Port And Not Block The Headphone Port..
𝗘𝘅𝘁𝗲𝗻𝗱 𝗬𝗼𝘂𝗿 𝗣𝗹𝗮𝘆 𝗧𝗶𝗺𝗲: With 5000Mah Large Capacity, This Battery Pack For Oculus Quest 2 Provides You Extra 2-4 Hours Of Vr Playtime And Lets You Get Rid Of Traditional Vr Charging Troubles Such As Long Link Cable, Offering You A Better Virtual Reality Game Experience..
Features
- : Exclusive slide-in design, plug in and charge, no need adapter or install a bulky battery at the back of your head, no risk of falling. Touch switch design can give you a cooler and better VR experience. Unique mold, portable to take is perfect for Quest 2 headset. Exclusive shape battery indicator design so that you can know the remaining battery.
- : With 5000mAh large capacity, this battery pack for oculus quest 2 provides you extra 2-4 hours of VR playtime and lets you get rid of traditional VR charging troubles such as long link cable, offering you a better virtual reality game experience.
- : Safety-certified battery pack for Meta Quest 2. The battery pack has 5V/2A input/output, which can charge Meta Quest 2 faster.
- : This battery pack uses the same color scheme as the Quest 2, so that there is no sense of incongruity after the battery is plugged in and charged. It's compact and lightweight, and will not let you feel weight increase or the pressure on your face. It will not damage your headset type C port and not block the headphone port.
- : Compatible with Quest 2, Meta Quest, and other devices with Type-C connector. It only takes 2-3 hours to fully charge the battery pack. Great Meta Quest 2 accessories for VR game lovers.
- : VIYISI Portable Charger for oculus quest 2 1, USB A to USB C cable 1, User manual 1. Worry-free 24-month warranty and 7-day / 24h friendly customer service.
- See more on Amazon...
Brand: VIYISI | Manufacturer: Dong guan Utopia-Originality Technology Co., Ltd
Dimensions: 1.46 x 5.75 x 4.06 inches | Weight: 0.09 pounds
See On Amazon #13
TiMOVO Charging Dock for Meta Quest 3, Quest 3 Charging Dock with 45w Power Adapter, Magnetic Fast Oculus Quest 3 Charging Station for Headset & Controllers with LED Light & 2 Ni-MH Batteries, White
Asin: B0CNP8LZ3G | Ean: 0840156998338 | UPC: 840156998338
【Fast Charging, Save Your Time】Experience A Super Fast Charging Experience With Timovo Quest 3 Charging Station. It Supports Fast Charging Vr Headset And Controllers At The Same Time, Only Takes About 2 Hrs To Fully Charge Your Headset And Controllers! Greatly Save Time And Let You Start Your Next Vr Game Faster. We Provide A 45W Fast Charging Adapter In The Package, No More Need To Buy Another One..
【All-In-One Set For Your Convenience】 Our Package Includes Everything You Need To Enhance Your Quest 3 Charging Experience. You Will Receive 1×Charging Dock For Quest 3, 2×Rechargeable Batteries, 2×Battery Covers, 1×45W Ul Adapter, 1×3.3Ft Type-C Cable And 1× User Manual. If You Have Any Problems, Please Feel Free To Contact Us Any Time, We Will Solve The Problem For You Within 24 Hours..
【See The Power By Led Lights】This Meta Quest 3 Charging Station Features Charging Indicator To Make The Charging Status Clear. The Front Led Button Shows The Headset's Charging Status, You Can Press It To Turn Off The Overall Led Light While You Sleep And The Charging Will Continue. Besides, The Two Rear Led Indicators Show Controller Charging Status. Orange Light: Charging, Green Light: Fully-Charged (The System Displays 80% Power, But The Actual Battery Is Fully Charged.).
【Tidy Gaming Setup Display】This Charger Dock For Quest 3 For Not Only Charges Your Devices, But Also Double As A Dedicated Storage Space And Display Stand For Your Quest 3 Headset And Controllers. It Saves Space And Keeps Your Headset And Controllers Organized And Within Easy Reach, Ready For Your Gaming Sessions. The Charging Stand Has Non-Slip Pads On The Bottom For More Stable And Secure Placement..
【Eco-Friendly Rechargeable Battery】Say Goodbye To The Hassle Of Frequent Battery Replacement, This Quest 3 Charging Stand Requires Replacing The Rechargeable Nimh Battery And Battery Cover That Came With Us When Charging The Controller. Ni-Mh Batteries Are More Environmentally Friendly, Safe And Durable! (Note: Ni-Mh Batteries Have A Low Voltage (About 3.7V), So When The Charging Base Turns Green, The Vr System May Show That It Is 80% Charged, But In Fact Our Battery Is Fully Charged.).
【Compatible With Official Elite Strap】Our Quest 3 Charging Station Is Also Compatible With Official Elite Strap. However, For Third-Party Headstrap, If They Are Too Heavy, The Center Of Gravity Will Shift Backward, And The Quest 3 Headset Will Tilt Up And Cannot Be Aligned With The Magnetic Port For Charging. You Can Place A Book Or Other Items Under The Third-Party Headset To Maintain Balance..
Features
- Magnetic Charging Dock for Oculus/Meta Quest 3 This Quest 3 charging dock is only compatible with Oculus/Meta Quest 3 headset and controllers. Just align the VR headset and controllers to the magnetic contacts, then put them down and power on, a stable and safe charging starts. Built-in chips offer multiple protections against overheating, overcharging and short circuits, let you charge with peace of mind.
- Compatible with Official Elite Strap Our Quest 3 charging station is also compatible with official elite strap. However, for third-party headstrap, if they are too heavy, the center of gravity will shift backward, and the Quest 3 headset will tilt up and cannot be aligned with the magnetic port for charging. You can place a book or other items under the third-party headset to maintain balance.
- Fast Charging, Save Your Time Experience a super fast charging experience with TiMOVO Quest 3 charging station. It supports fast charging VR headset and controllers at the same time, only takes about 2 hrs to fully charge your headset and controllers! Greatly save time and let you start your next VR game faster. We provide a 45w fast charging adapter in the package, no more need to buy another one.
- Eco-Friendly Rechargeable Battery Say goodbye to the hassle of frequent battery replacement, this Quest 3 charging stand requires replacing the rechargeable NiMH battery and battery cover that came with us when charging the controller. Ni-MH batteries are more environmentally friendly, safe and durable! (Note: Ni-MH batteries have a low voltage (about 3.7V), so when the charging base turns green, the VR system may show that it is 80% charged, but in fact our battery is fully charged.)
- See the Power by LED Lights This Meta Quest 3 charging station features charging indicator to make the charging status clear. The front LED button shows the headset's charging status, you can press it to turn off the overall LED light while you sleep and the charging will continue. Besides, the two rear LED indicators show controller charging status. Orange light: Charging, Green light: fully-charged (The system displays 80% power, but the actual battery is fully charged.)
- Tidy Gaming Setup Display This charger dock for Quest 3 for not only charges your devices, but also double as a dedicated storage space and display stand for your Quest 3 headset and controllers. It saves space and keeps your headset and controllers organized and within easy reach, ready for your gaming sessions. The charging stand has non-slip pads on the bottom for more stable and secure placement.
- All-in-One Set for Your Convenience Our package includes everything you need to enhance your Quest 3 charging experience. You will receive 1 charging dock for Quest 3, 2 rechargeable batteries, 2 battery covers, 1 45w UL adapter, 1 3.3ft Type-C cable and 1 user manual. If you have any problems, please feel free to contact us any time, we will solve the problem for you within 24 hours.
- See more on Amazon...
Brand: TiMOVO | Manufacturer: TiMOVO
Dimensions: 2.17 x 10.63 x 6.50 inches | Weight: 1.10 pounds
See On Amazon #14
DESTEK Upgraded Cooling Face Pad Compatible with Quest 3 Accessories, Facial Interface Face Cushion Face Cover Replacement
Asin: B0CYH3W9WG
Enjoy Extended Playtime Without Discomfort. Our Gel Face Pad Is Designed To Provide A Pressure-Free Fit, Allowing For Immersive Gaming Sessions..
The Facial Interface Offers An Improved Fit And Comfort. Its Ergonomic Design Ensures A Secure Fit And Reduces Discomfort, Allowing For Longer And More Enjoyable Vr Sessions..
Easy To Clean And Maintain, It Offers Long-Lasting Freshness. Keep Your Vr Experience Clean And Enjoyable..
Say Goodbye To Discomfort And Excessive Sweating With Our Ice-Cool Face Pad. The Soft And Breathable Material Ensures Optimal Airflow, Keeping You Cool And Dry During Intense Gameplay..
Features
- DESTEK Patented Item: Enhance your Quest 3 experience with our Ice-cool Gel face pad. Innovative material designed specifically for gaming, our face cushion provides a comfortable and supportive fit for extended gaming sessions.
- Say goodbye to discomfort and excessive sweating with our ice-cool Face Pad. The soft and breathable material ensures optimal airflow, keeping you cool and dry during intense gameplay.
- Enjoy extended playtime without discomfort. Our gel face pad is designed to provide a pressure-free fit, allowing for immersive gaming sessions.
- Easy to clean and maintain, it offers long-lasting freshness. Keep your VR experience clean and enjoyable.
- The facial interface offers an improved fit and comfort. Its ergonomic design ensures a secure fit and reduces discomfort, allowing for longer and more enjoyable VR sessions.
- See more on Amazon...
Brand: DESTEK | Manufacturer: SHENZHEN XINLIANYOUPIN TECHNOLOGY CO., LIMITED
Warranty: 1 year manufacturer
See On Amazon #15
LEKOYE Cooling Gel Face Pad Cover for Oculus Quest 3, Adjustable Facial Interface Frame with 2 Replacement Soft Face Cushion Pad, VR Accessories Set for Meta Quest 3 Including Anti-Leakage Nose Pad
Asin: B0CRKRPCXK | Model: LKY-Gel-V302 | PartNumber: LKY-Gel-V302 | Ean: 0616833002083 | UPC: 616833002083
【Washabal & Easy To Matain】 Simply Remove This Quest 3 Face Cover Pad And Very Easy To Wash It, And It Drys Quickly, It Still Maintains The Original State Even Wash It Repeatedly, The Installation Is Also Very Easy..
【What You Get】 Quest 3 Face Pad Cover*2, Facial Bracket*1, Nose Pad*1, User Manual*1, And Lokeye 12 Months Warranty. If You Have Any Questions About This Product, Please Feel Free To Contact Us, And You Can Get A Satisfactory Answer Within 24 Hours..
【Anti-Leakage & Anti-Fog】 The Quest 3 Facial Interface Cushion Pad With Nose Pad Is An Integrated Assembly To Prevent Light From Outside The Quest 2 Headset, The Vents On The Bracket Facilitate Air Circulation To Avoid Lens Fogging, Which Allow You Fully Immerse Yourself In Vr Gaming..
【Designed For Quest 3】 This Face Cushion Pad And Facial Bracket Are Perfect Fit For Oculus Quest 3(Not Fit For Quest 2), The Cushion Pad Is Soft And Flexible, Compared To Others, It Will Provide Much Less Pressure On The Face Even Wear Vr Headset With It Tightly. The Facial Bracket Has 2 Rotary Knobs To Adjust Bracket To Perfectly Fit Your Face..
Features
- 2 RREPLACEMENT ICE COOL FEELING GEL COVER No more worry about stuffy when playing VR games for a long time, our face pad cover is made of breathable gel and covered with skin-friendly cloth, so it will make your face feel cool and enjoy VR games, 2 replacement gel face cover still allows you to enjoy VR when the other one is washed, or you can place them in refrigerator to make them cooler and replace them to use if you prefer cooler feeling.
- Designed for Quest 3 This face cushion pad and facial bracket are perfect fit for Oculus Quest 3(NOT fit for quest 2), the cushion pad is soft and flexible, compared to others, it will provide much less pressure on the face even wear VR headset with it tightly. The facial bracket has 2 rotary knobs to adjust bracket to perfectly fit your face.
- WASHABAL & EASY TO MATAIN Simply remove this quest 3 face cover pad and very easy to wash it, and it drys quickly, it still maintains the original state even wash it repeatedly, the installation is also very easy.
- ANTI-LEAKAGE & ANTI-FOG The Quest 3 facial Interface cushion pad with nose pad is an integrated assembly to prevent light from outside the Quest 2 headset, the vents on the bracket facilitate air circulation to Avoid lens fogging, which allow you fully immerse yourself in VR gaming.
- WHAT YOU GET Quest 3 face pad cover*2, facial bracket*1, nose pad*1, user manual*1, and LOKEYE 12 months warranty. If you have any questions about this product, please feel free to contact us, and you can get a satisfactory answer within 24 hours.
- See more on Amazon...
Brand: LEKOYE | Manufacturer: LEKOYE
Dimensions: 1.30 x 6.70 x 3.10 inches | Weight: 0.34 Pounds
See On Amazon #16
EUCARLOS Controller Grips Cover Compatible with Meta Quest 3 Accessories, Silicone Grip Cover with Battery Opening Cover and Adjustable Knuckle Straps for Oculus Quest 3 VR Controllers
Asin: B0CLW528FC | Model: EU-Q3CTLGRIP-A01 | PartNumber: EU-Q3CTLGRIP-A01
Adjustability Of Size - The Adjustable Knuckle Strap Secured By Stronger Velcro, Fits Different Hand Sizes, Safeguard Your Controller Grips From Accidental Drops Or Slips. You Can Stay Comfortable Even During Long Gaming Sessions..
Easy To Install And Replace Battery - The Design Of The Battery Opening Allows You To Complete The Installation And Replacement Of The Battery Easier, Don't Remove The Entire Cover Of The Controller Grips. The Plastic Battery Pull Tab Should Be Located Below The Battery..
Ensure Perfect Signal Tracking - The Grip Cover Does Not Block Any Infrared Tracking Sensors. Comfortable Touch And Steady Signal Will Greatly Enhance Your Vr Gaming Experience..
Non-Slip And Durable - Controller Grips Cover For Quest 3 Made Of Silicone Material, It Gives You A Comfortable And Soft Touch When Grasping The Game Controller For A Long Time. Also Increases Grip And Ventilation, And The Controller Can Be Firmly Grasped Without Slipping When The Hand Sweats..
Features
- Protect Your Controller - EUCARLOS controller grip cover fits perfectly for quest 3 controller. The knuckle strap prevents you from accidentally throwing the controller. When you release your hand, your controller still fits firmly into your palm.
- Non-slip and Durable - Controller grips cover for quest 3 made of silicone material, it gives you a comfortable and soft touch when grasping the game controller for a long time. Also increases grip and ventilation, and the controller can be firmly grasped without slipping when the hand sweats.
- Adjustability of Size - The adjustable knuckle strap secured by stronger velcro, fits different hand sizes, safeguard your controller grips from accidental drops or slips. You can stay comfortable even during long gaming sessions.
- Ensure Perfect Signal Tracking - The grip cover does not block any infrared tracking sensors. Comfortable touch and steady signal will greatly enhance your VR gaming experience.
- Easy to Install and Replace Battery - The design of the battery opening allows you to complete the installation and replacement of the battery easier, don't remove the entire cover of the controller grips. The plastic battery pull tab should be located below the battery.
- See more on Amazon...
Brand: EUCARLOS | Manufacturer: EUCARLOS
Warranty: 1 YEAR MANUFACTURER
See On Amazon #17
Face Cover Cooling Fan with RGB Light for Quest 3 Accessories, Dobewingdelou Fan Cooler Face Cushion Pad Facial Interface Soft Replacement Foam Black
Asin: B0CZZZW4QC | Model: Q3-004-BK | PartNumber: Q3-004-BK
Anti-Leakage Pad: Our Face Cover Has A Silicon Nose Pad, And It Fits Any Size Of Nose And Does Great To Blocking Lights, Making A More Immersive Gaming Experience During Gaming. The Nose Pad Can Be Disassembled For Cleaning..
Fit For Glasses-Wearing Players: Our Facial Interface Is Designed To Be Higher, Making It Much More Comfortable For Glasses-Wearing Players..
Led Lighting Effects: This Led Light Has 7 Colors, 7 Colors Work In A Loop, Making Your Machine More Dazzling Cool And Providing A Better Gaming Atmosphere Have A Happy Game Time..
Comfortable Face Pad: The Face Cover Is Made Of A High-Quality Soft Foam Pad, Filled With A Sponge For A Softer, And The Size Is Widened To Better Fit The Facial Contour, With A Larger Contact Area, Effectively Reducing The Pressure On The Head, Making It Softer And More Comfortable. Velcro Design, Easy To Take Off And Clean, Keeping Your Vr Gaming Experience Enjoyable..
Features
- Cooling Fan Design: The cooling fan is designed for Quest 3, it can make sure sucks enough air to prevent fogging during playing games, keep you cool and sweatproof, and makes your lens clear. We have specially designed fan switches that you can freely control.
- Comfortable Face Pad: The face cover is made of a high-quality soft foam pad, filled with a sponge for a softer, and the size is widened to better fit the facial contour, with a larger contact area, effectively reducing the pressure on the head, making it softer and more comfortable. Velcro design, easy to take off and clean, keeping your VR gaming experience enjoyable.
- Anti-leakage Pad: our face cover has a silicon nose pad, and it fits any size of nose and does great to blocking lights, making a more immersive gaming experience during gaming. The nose pad can be disassembled for cleaning.
- LED lighting effects: This LED Light has 7 colors, 7 colors work in a loop, making your machine more dazzling cool and providing a better gaming atmosphere have a happy game time.
- Fit for Glasses-Wearing Players: Our Facial Interface is designed to be higher, making it much more comfortable for glasses-wearing players.
- See more on Amazon...
Brand: Dobewingdelou | Manufacturer: Dobewingdelou
Dimensions: 4.00 x 7.00 x 4.50 inches
See On Amazon #18
LEKOYE Cooling Gel Face Pad Cover for Oculus Quest 2, Soft Facial Interface Face Cushion Pad with Air Vents, Including Anti-Leakage Nose Pad and Lens Cover VR Accessories for Meta Quest 2
Asin: B0CMDCM2JQ | Model: LKY-Gel | PartNumber: LKY-Gel | Ean: 0616833002021 | UPC: 616833002021
【Washabal & Easy To Maintain】 Simply Remove This Face Cover Pad And Very Easy To Wash It, And It Drys Quickly, It Still Maintains The Original State Even Wash It Repeatedly, The Installation Is Also Very Easy..
【What You Get】 Gel Face Pad Cover*1, Facial Bracket*1, Nose Pad*1, Lens Cover*1, User Manual*1, And Lokeye 12 Months Warranty. If You Have Any Questions About This Product, Please Feel Free To Contact Us, And You Can Get A Satisfactory Answer Within 24 Hours..
【Anti-Leakage & Anti-Fog】 The Facial Interface Cushion Pad With Nose Pad Is An Integrated Assembly To Prevent Light From Outside The Quest 2 Headset, The Vents On The Bracket Facilitate Air Circulation To Avoid Lens Fogging, Which Allow You Fully Immerse Yourself In Vr Gaming..
【Perfect Fit & Pressureless】 This Face Cushion Pad Is Perfect Fit For Oculus Quest 2, The Cushion Pad Is Soft And Flexible, Compared To Others, It Will Provide Much Less Pressure On The Face Even Wear Vr Headset With It Tightly..
Features
- ICE COOL FEELING No more worry about stuffy when playing VR games for a long time, our face pad cover is made of breathable gel and covered with skin-friendly cloth, so it will make your face feel cool and enjoy VR games.
- PERFECT FIT & PRESSURELESS This face cushion pad is perfect fit for Oculus Quest 2, the cushion pad is soft and flexible, compared to others, it will provide much less pressure on the face even wear VR headset with it tightly.
- WASHABAL & EASY TO MAINTAIN Simply remove this face cover pad and very easy to wash it, and it drys quickly, it still maintains the original state even wash it repeatedly, the installation is also very easy.
- ANTI-LEAKAGE & ANTI-FOG The facial Interface cushion pad with nose pad is an integrated assembly to prevent light from outside the Quest 2 headset, the vents on the bracket facilitate air circulation to Avoid lens fogging, which allow you fully immerse yourself in VR gaming.
- WHAT YOU GET Gel face pad cover*1, facial bracket*1, nose pad*1, lens cover*1, user manual*1, and LOKEYE 12 months warranty. If you have any questions about this product, please feel free to contact us, and you can get a satisfactory answer within 24 hours.
- See more on Amazon...
Brand: LEKOYE | Manufacturer: LEKOYE
Dimensions: 4.10 x 6.80 x 4.20 inches
See On Amazon #19
AMVR Upgraded Face Cushion Pad for Oculus/Meta Quest 2 Accessories, Fitness Facial Interface with Air Circulation Cooling Fan and Soft Leather Face Cover, Relieve Lens Fogging and Light-Proof Nose Pad
Asin: B0BGQZD977
Brand: M AMVR | Manufacturer: AMVR
Dimensions: 3.35 x 7.01 x 4.41 Inches | Weight: 0.09 Pounds
See On Amazon #20
Face Pad Replacement for Meta/Oculus Quest 3 Accessories, Facial Interface Bracket Face Cushion Cover with Anti-Leakage Nose Pad, Lens Protector, Relieve Lens Fogging and Hot Air
Asin: B0CLXQG5YP
💡 Enhanced Fitness And Comfort: Face Pad For Quest 3 Is Made Of High-Quality Leather And Thickened Memory Foam, With A Soft Texture That Perfectly Fits The Face And Reduces The Face Pressure. Sweatproof And Cleanable Leather Surface For Improved Comfort And Support, Making A Big Difference In Your Gaming Experience..
💡 Upgraded Version : The Vr Face Cover Has Right Softness And Thickness To Make You Keeping Away To Pressure Headaches And Excessive Sweating. Maintain Optimal Hygiene: With Velcro Design To Make It Easy To Install And Remove, Can Be Wiped With A Damp Towel Or Cleaned Directly..
💡 No Light Leakage: Nose Pads For Quest 3 Fit Any Size Nose With A Perfect Fit, Preventing Light Leakage During Use And Preventing Water Vapor From Rising And Fogging Your Vision, Allowing For Immersive Gaming Sessions. Also Equipt With Lens Cover To Protect Vr Glasses From Dust, Scratches, Smudges, Uv Rays And Aging..
💡 Reducing Lens Fogging: Vr Face Interface Bracket Is Designed With Unique Air Ducts,Which Allows For A Convection-Type Airflow Effect Preventing Fogged Lenses Or Overheating -- More Friendly For Folks That Wear Glasses..
Features
- COOLING FEELING: VR fitness facial Interface replacement is breathable and comfortable, keeping your face cool and dry during extended playtime without discomfort. The face shield effectively improves the ventilation of the original face pad, no more sweat buildup, any fogging or overheating problems.
- REDUCING LENS FOGGING: VR Face Interface bracket is designed with unique air ducts,which allows for a convection-type airflow effect preventing fogged lenses or overheating -- More friendly for folks that wear glasses.
- ENHANCED FITNESS AND COMFORT: Face pad for quest 3 is made of high-quality leather and thickened memory foam, with a soft texture that perfectly fits the face and reduces the face pressure. Sweatproof and cleanable leather surface for improved comfort and support, making a big difference in your gaming experience.
- NO LIGHT LEAKAGE: Nose pads for quest 3 fit any size nose with a perfect fit, preventing light leakage during use and preventing water vapor from rising and fogging your vision, allowing for immersive gaming sessions. Also equipt with lens cover to protect VR glasses from dust, scratches, smudges, UV rays and aging.
- UPGRADED VERSION : The VR face cover has right softness and thickness to make you keeping away to pressure headaches and excessive sweating. Maintain optimal hygiene: with velcro design to make it easy to install and remove, can be wiped with a damp towel or cleaned directly.
- See more on Amazon...
Brand: Lampelc | Manufacturer: Lampelc
Warranty: 1 year
See On Amazon
Looking For Something Else?
Search