BETAFPV Meteor75 1S Micro FPV Whoop Drone Quadcopter for FPV Racing Freestyle Flight Indoor Outdoor Fly Up to 6 Minutes with F4 1S 5A Flight Controller 0802SE 19500KV Motor C03 Camera - ELRS
Asin: B0BMVG1J1T | Model: 01010023_1 | PartNumber: 01010023_1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Power System】By Using The Latest 0802Se 19500Kv Motors And 40Mm 2-Blade Props, Which Provides Pilots With Stronger Experience Of Powerful Indoor And Outdoor Flight. The Newest Motor Makes The Perfect Dynamic Balance, Which Gives The Drone More Flexibility And Longer Flying Time, Which Is Perfect For The Weight-Sensitive 75Mm Brushless Whoop Drone..
【Meteor75 Frame】Meteor75 Frame Weighs Only 5.68G And Is Durable Enough. The Battery Slot Is Closer To The Center Of Gravity For A Smoother Flying Experience, And You Will Land On The Motor Screws Instead Of The Battery..
【Camera&Canopy】Built-In 1.52G Ultralight Weight C03 Camera, Offer A High-Quality, Clear And Sharper Images To Pilots. Adopted With A Injection Molding Canopy Which Only 1.60G, More Durable, Anti-Ruin, And Heat-Resitant, Gives Your Whoop Drone A Good Protection..
【F4 1S 5A Fc】The Flight Controller Of Meteor75 Has Been Upgraded To F4 1S 5A Serial Elrs V3.0, Which Can Be Updated Via Wi-Fi Or Betaflight Serial Passthrough. Pilots Can Flash Any Version Of Elrs Rx Firmware Without Updating Fc Firmware. With A High-Quality Bmi270 Gyro And Bb51 Esc Hardware. In Addition, This New Board Supports The Betaflight Blackbox Function..
Features
- Upgraded Meteor75 Meteor75, 1S lightweight whoop drone comes back with a completely new look. Equipped with the BT2.0 connector, the lightest F4 1S 5A FC, new 0802SE 19500KV motors, and a C03 FPV camera. With the combination of those electronics and parts, it reaches the best balance between performance, weight, durability, and premium build design.
- F4 1S 5A FC The flight controller of Meteor75 has been upgraded to F4 1S 5A Serial ELRS V3.0, which can be updated via Wi-Fi or Betaflight serial passthrough. Pilots can flash any version of ELRS RX firmware without updating FC firmware. With a high-quality BMI270 gyro and BB51 ESC hardware. In addition, this new board supports the Betaflight Blackbox function.
- Power System By using the latest 0802SE 19500KV motors and 40mm 2-blade props, which provides pilots with stronger experience of powerful indoor and outdoor flight. The newest motor makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time, which is perfect for the weight-sensitive 75mm brushless whoop drone.
- Camera&Canopy Built-in 1.52g ultralight weight C03 camera, offer a high-quality, clear and sharper images to pilots. Adopted with a injection molding canopy which only 1.60g, more durable, anti-ruin, and heat-resitant, gives your whoop drone a good protection.
- Meteor75 Frame Meteor75 frame weighs only 5.68g and is durable enough. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 2.56 x 5.12 x 5.12 inches
See On Amazon Similar To BETAFPV Meteor75 1S Micro FPV
#1
BETAFPV Cetus Pro FPV Drone Kit with 3 Flight Modes Altitude Hold Emergency Landing Self Protection Turtle Mode with Radio Transmitter Goggles for FPV Beginners Player-to-Pilot Teenager Girls Boys
Asin: B09BJPNBWJ | Model: 00313897_1 | PartNumber: 00313897_1 | Ean: 0705644073662 | UPC: 705644073662
🛩️【Altitude Hold Function】Altitude Hold Function Enables Cetus Pro Brushless Quadcopter To Auto-Hover. The Quadcopter Can Stay At A Current Height When Pilots' Hands Are Off The Transmitter. The Barometer/Laser Achieves Accurate And Stable Positioning, Which Makes The Quad Hovering Indoors Very Stable. (The Altitude Hold Function Is Only Available In N Mode).
🛩️【Turtle Mode】Cetus Pro Brushless Quadcopter Comes With Turtle Mode Which Is The World's Leading Technology. When Cetus Pro Brushless Quadcopter Falls To The Ground Upside-Down, Simply Activate Turtle Mode With Your Transmitter To Turn It Over. No Walking Through The Fields For This.
🛩️【Self-Protection Function】The Cetus Quadcopter Has An Excellent Self-Protection Function. Which Can Make An Emergency Landing When It Loses Control Or In Low Battery. It Will Also Automatically Disarm And Drop On Ground Once It Has A Strong Collision With The Object. No More Worry About Loss And Crash.
🛩️【N/S/M 3 Flight Modes】Normal/ Sport/ Manual Are Available, Which Can Satisfy The Different Needs Of Pilots And Adapt To Various Flight Environments. Meanwhile, These 3 Modes All Support 3 Different Speeds In Slow/Mid/Fast.
Features
- Cetus Pro FPV Kit BETAFPV Cetus Pro FPV Kit is a brushless whoop drone designed from the ground up for FPV beginners. Auxiliary flight function is available for novices, greatly reducing the threshold of operating. Cetus Pro brushless quadcopter is robust and powerful, allowing you to fly faster, race, and even do freestyle flying. Taking you from ZERO to Super Pilot in one kit
- N/S/M 3 Flight Modes Normal/ Sport/ Manual are available, which can satisfy the different needs of pilots and adapt to various flight environments. Meanwhile, these 3 modes all support 3 different speeds in SLOW/MID/FAST
- Altitude Hold Function Altitude hold function enables Cetus Pro brushless quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots' hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. (The altitude hold function is only available in N mode)
- Self-protection Function The Cetus quadcopter has an excellent self-protection function. Which can make an emergency landing when it loses control or in low battery. It will also automatically disarm and drop on ground once it has a strong collision with the object. No more worry about loss and crash
- Turtle Mode Cetus Pro brushless quadcopter comes with turtle mode which is the world's leading technology. When Cetus Pro brushless quadcopter falls to the ground upside-down, simply activate turtle mode with your transmitter to turn it over. No walking through the fields for this
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.39 x 3.94 x 3.94 inches | Weight: 1.63 pounds
See On Amazon #2
BETAFPV Cetus FPV RTF Drone Kit for Brushed Racing Drone from Player-to-pilot with LiteRadio 2 SE Remote and FPV Goggles Ready to Fly FPV Drone Kit for Beginners
Asin: B09489R75R | Model: 313881 | PartNumber: 313881 | Ean: 0705644073488 | UPC: 705644073488
🎄【Self-Protection Function】 The Cetus Quadcopter Can Make An Emergency Landing When It Loses Control Or Is In Low Battery. It Will Also Automatically Disarm And Drop To The Ground Once It Has A Strong Collision With The Object. No More Worry About Loss And Crash..
🎄【Notice&Warranty】Please Verify That All Components Are Included, Without Damage And With No Deformation, And All Parts Are Fully Charged Before Flying The Kit. If Not Or No Matter What Is Wrong With Your Betafpv Items, Please Don't Worry, Betafpv Guarantees To Serve You!.
🎄【Manual&Package】 User Manual Is Included, Pilots Will Master The Fpv Drone Easier With It. All Parts Are Stored In A Specially Customized Carry Case, Which Provides Better Protection And It Is Easy To Carry. After-Sales Service: Cetus Kit Requires Certain Operating Skills. If You Are A Beginner And Have Any Questions About The Operation Of Our Products, Please Contact Our Customer Service Immediately And We Will Reply To You Within 12 Hours..
🎄【Altitude Hold Function】 Altitude Hold Function Enables The Cetus Quadcopter To Auto-Hover. The Quadcopter Can Stay At A Current Height When The Pilots' Hands Are Off The Transmitter. The Flight Has Never Been So Easy For A Beginner. Please Note That The Altitude Hold Function Is Only Available In N Mode..
Features
- Cetus FPV Kit BETAFPV Cetus FPV kit is prepared for the FPV starter. The Cetus FPV kit comes with a special design of a Cetus brushed whoop quadcopter, LiteRadio 2 SE, and FPV Goggles. The auxiliary flight function is suitable for novices, greatly reducing the threshold of operating. 3 Flight Modes allow you to achieve from a beginner to a professional pilot.
- Altitude Hold Function Altitude hold function enables the Cetus quadcopter to Auto-Hover. The quadcopter can stay at a current height when the pilots' hands are off the transmitter. The flight has never been so easy for a beginner. Please note that The altitude hold function is only available in N mode.
- Self-protection Function The Cetus quadcopter can make an emergency landing when it loses control or is in low battery. It will also automatically disarm and drop to the ground once it has a strong collision with the object. No more worry about loss and crash.
- Manual&Package User manual is included, pilots will master the FPV drone easier with it. All parts are stored in a specially customized carry case, which provides better protection and it is easy to carry. After-sales service: Cetus kit requires certain operating skills. If you are a beginner and have any questions about the operation of our products, please contact our customer service immediately and we will reply to you within 12 hours.
- Notice&Warranty Please verify that all components are included, without damage and with no deformation, and all parts are fully charged before flying the kit. If not or No matter what is wrong with your BETAFPV items, please don't worry, BETAFPV guarantees to serve you!
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 5.12 x 11.02 x 8.66 inches | Weight: 1.47 pounds
See On Amazon #3
BETAFPV 4pcs Lava 550mAh 1S 3.8V LiHV 75C FPV LiPo Battery with BT2.0 Connector for 1-2S FPV Tiny Whoop Drone Quadcopters Like Meteor75, Meteor75 Pro, Cetus Pro 1S Brushless Drones, Cetus X 2S Quad
Asin: B0CPDK7QD8
【Performance】With An Extended Battery Cycle Life, It Ensures Prolonged Power Support, Bringing Users Sustained And Reliable Performance..
【Suitable】 Lava 1S 550Mah Lipo Battery Is Suitable For 1-2S Fpv Tiny Whoop Drone Like Cetus Pro, Cetus X, Meteor75, Meteor75 Pro And Other 1-2S Fpv Racing Drone..
【Design】Lava 1S 550Mah Lipo Battery Comes With Bt2.0 Connector And Features A New Design That Symbolizes Explosive Power Akin To Molten Lava..
【High C-Rate】With A Boosted Discharge Rate Of 75C, It Provides Greater Burst Power For Superior Flight Performance And Maneuverability For Unparalleled Control..
Features
- Z-Folding Process LAVA series batteries feature a Z-Folding Process, which enables efficient high-current discharge within shorter time frames, resulting in elevated discharge platforms. Compared to the Winding Process, it achieves a 0.2V higher discharge platform under equivalent loads and boasts a 5% higher energy density within the same volume, extending flight time and reducing battery replacement inconvenience.
- High C-Rate With a boosted discharge rate of 75C, it provides greater burst power for superior flight performance and maneuverability for unparalleled control.
- Performance With an extended battery cycle life, it ensures prolonged power support, bringing users sustained and reliable performance.
- Design LAVA 1S 550mAh Lipo Battery comes with BT2.0 connector and features a new design that symbolizes explosive power akin to molten lava.
- Suitable LAVA 1S 550mAh Lipo Battery is suitable for 1-2S FPV Tiny Whoop drone like Cetus Pro, Cetus X, Meteor75, Meteor75 Pro and other 1-2S FPV racing drone.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.28 x 2.36 x 0.63 inches
See On Amazon #4
BETAFPV Aquila16 FPV Drone Kit with Altitude Hold, 8Mins Flight, for FPV Beginner to Fly Indoor Outdoor Longer, 3 Flight&Speed Modes, DVR Recording, Simulator Supported, 1S RTF Kit with ELRS 3.0
Asin: B0CQY4QZBF
🛩️【Flight Modes】The Aquila16 Brushless Quadcopter Offers N/S/M 3 Flight Modes And Supports 3 Different Speeds With Slow/Mid/Fast. With Turtle Mode, No Burden To Fly Away, And There Is No Need To Walk Away To Correct The Position Manually To Flip It Over And Resume Flying When The Quadcopter Falls To The Ground And Upside Down. Whether You're A Seasoned Fpv Pilot Or A Complete Beginner, The Aquila16 Fpv Kit Empowers Everyone To Fly Confidently From Day One..
🛩️【Package&Warranty】All Components, Including The Quadcopter, Radio Transmitter, Fpv Goggles, And Accessories, Are Conveniently Packed In A Portable Eva Storage Bag For Easy Transportation And Enhanced Equipment Protection. Please Verify That All Components Are Included, Without Damage And With No Deformation, All Parts Are Fully Charged Before Flying The Kit. If Not Or No Matter What Is Wrong With Your Betafpv Items, Betafpv Guarantees To Serve You!.
🛩️【Inverted Designed】The Inclusion Of An Inverted Duct System Enhances Thrust And Stability, Enabling The Drone To Achieve Superior Flight Performance With Precision. The Fixed Configuration Port And Modular Battery Minimize Redundancy Designs, Making Installation Simple And Hassle-Free. The Duct Guard Design Ensures Safe Flights By Protecting The Propellers, Equipped To Handle Unexpected Obstacles..
🛩️【Altitude Hold】The Aquila16 Drone Excels In Hover Capability For Assisted Flight, Ensuring Safe And Effortless Flight For Worry-Free Learning. Built-In Highly Precise Barometer To Detect The Height, It Benefits From Great Stability Due To Its Position Hold Mode, And Auto-Hovering, Which Enables The Drone To Stay At The Current Height. This Function Guarantees Emergency Landing In Situations Of Lost Control Or Low Battery..
Features
- 8Mins Flight Aquila16 FPV Kit with an impressive 8-minute flight time, pilots can enjoy endless practice sessions and a flight distance of up to 200m indoors or outdoors. Enjoy uninterrupted flights, enabling pilots to concentrate on refining their piloting skills. The kit features a high-power, low-latency 350 video transmission system, guaranteeing real-time video transmission with stable signals up to 200 meters. Say goodbye to lag and immerse yourself in the thrill of the flight.
- Altitude Hold The Aquila16 drone excels in hover capability for assisted flight, ensuring safe and effortless flight for worry-free learning. Built-in highly precise barometer to detect the height, it benefits from great stability due to its position hold mode, and auto-hovering, which enables the drone to stay at the current height. This function guarantees emergency landing in situations of lost control or low battery.
- Flight Modes The Aquila16 Brushless Quadcopter offers N/S/M 3 flight modes and supports 3 different speeds with SLOW/MID/FAST. With Turtle Mode, no burden to fly away, and there is no need to walk away to correct the position manually to flip it over and resume flying when the quadcopter falls to the ground and upside down. Whether you're a seasoned FPV pilot or a complete beginner, the Aquila16 FPV Kit empowers everyone to fly confidently from day one.
- Inverted Designed The inclusion of an inverted duct system enhances thrust and stability, enabling the drone to achieve superior flight performance with precision. The fixed configuration port and modular battery minimize redundancy designs, making installation simple and hassle-free. The duct guard design ensures safe flights by protecting the propellers, equipped to handle unexpected obstacles.
- Package&Warranty All components, including the quadcopter, radio transmitter, FPV goggles, and accessories, are conveniently packed in a portable EVA storage bag for easy transportation and enhanced equipment protection. Please verify that all components are included, without damage and with no deformation, all parts are fully charged before flying the kit. If not or No matter what is wrong with your BETAFPV items, BETAFPV guarantees to serve you!
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 5.51 x 10.43 x 8.66 inches
See On Amazon #5
BETAFPV Serial ELRS F4 1S 5A AIO Brushless Flight Controller with 8MB BlackBox Support Flash via WIFI Betaflight Serial Passthrough with BT2.0 Cable Connector for 65/75mm 1S FPV Whoop Drones
Asin: B0BKPTCMKR
【8Mb Blackbox】Built-In An 8Mb Flash Memory Chip Dedicated To Blackbox Logging. It’S An Extremely Powerful Tool For Tuning And Troubleshooting An Fpv Drone..
【Technical Support & Warranty】Betafpv Has A Professional Team And Considerate After-Sales Service. If You Have Any Issues With Its Technical Or Quality, Betafpv Guarantees To Serve You!.
【Cross Shape】F4 1S 5A Aio Fc Adopts The Classic Cross Shape Design With Only 3.6G Ultralight Weight, Reasonable Layout, And Easy To Build. With A 26*26Mm Mounting Hole Size, It Is Fully Compatible With The Whoop Frame In The Current Market. Especially Suitable For The Weight Sensitive 65/75Mm Wheelbase Micro Whoop Drones..
【Gyro&Esc Hardware】We Updated The Fc With High-Quality Bmi270 Gyro And Bb51 Esc Hardware. If You Want To Setup The Esc Specification, Please Use The Blhelisuite16714902a_Beta Or Esc-Configurator..
Features
- Serial ELRS Compared to the previous version, this new board uses Serial ExpressLRS 2.4G instead of SPI ELRS 2.4G so that it can support ExpressLRS V3.0. Pilots can flash any version of ELRS RX firmware via Wi-Fi or Betaflight serial passthrough.
- Gyro&ESC Hardware We updated the FC with high-quality BMI270 gyro and BB51 ESC hardware. If you want to setup the ESC specification, please use the BLHeliSuite16714902A_Beta or ESC-Configurator.
- 8MB BlackBox Built-in an 8MB flash memory chip dedicated to Blackbox logging. It s an extremely powerful tool for tuning and troubleshooting an FPV drone.
- Cross Shape F4 1S 5A AIO FC adopts the classic cross shape design with only 3.6g ultralight weight, reasonable layout, and easy to build. With a 26*26mm mounting hole size, it is fully compatible with the whoop frame in the current market. Especially suitable for the weight sensitive 65/75mm wheelbase micro whoop drones.
- Technical Support & Warranty BETAFPV has a professional team and considerate after-sales service. If you have any issues with its technical or quality, BETAFPV guarantees to serve you!
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.79 x 2.17 x 2.17 inches
See On Amazon #6
BETAFPV 5pcs Lava 1S 300mAh Lipo Battery 3.8V 75C LiHV Battery with BT2.0 Connector Compatible for 1S FPV Tiny Whoop Drone Quadcopter Like Cetus, Meteor65, Meteor65 Pro 1S Brushless Drones
Asin: B0CPDG4HMS
【Performance】With An Extended Battery Cycle Life, It Ensures Prolonged Power Support, Bringing Users Sustained And Reliable Performance..
【Suitable】 Lava 1S 300Mah Lipo Battery Is Suitable For 1S Fpv Tiny Whoop Drone Like Cetus, Meteor65, Meteor65 Pro And Other 1S Fpv Racing Drone With Bt2.0 Connector..
【Design】Lava 1S 300Mah Lipo Battery Comes With Bt2.0 Connector And Features A New Design That Symbolizes Explosive Power Akin To Molten Lava..
【High C-Rate】With A Boosted Discharge Rate Of 75C, It Provides Greater Burst Power For Superior Flight Performance And Maneuverability For Unparalleled Control..
Features
- Z-Folding Process LAVA series batteries feature a Z-Folding Process, which enables efficient high-current discharge within shorter time frames, resulting in elevated discharge platforms. Compared to the Winding Process, it achieves a 0.2V higher discharge platform under equivalent loads and boasts a 5% higher energy density within the same volume, extending flight time and reducing battery replacement inconvenience.
- High C-Rate With a boosted discharge rate of 75C, it provides greater burst power for superior flight performance and maneuverability for unparalleled control.
- Performance With an extended battery cycle life, it ensures prolonged power support, bringing users sustained and reliable performance.
- Design LAVA 1S 300mAh Lipo Battery comes with BT2.0 connector and features a new design that symbolizes explosive power akin to molten lava.
- Suitable LAVA 1S 300mAh Lipo Battery is suitable for 1S FPV Tiny Whoop drone like Cetus, Meteor65, Meteor65 Pro and other 1S FPV racing drone with BT2.0 connector.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.24 x 2.36 x 0.39 Inches | Weight: 0.02 pounds
See On Amazon #7
BETAFPV Meteor75 Pro 1S Brushless Whoop Drone Quadcopter with 45mm 3-Blade Propellers for FPV Freestyle Racing Indoor Outdoor, Fly Time Up to 6min with BT2.0 550mAh 1S Lipo Battery-ELRS
Asin: B0BZVS49TJ | Model: 01010026_1 | PartNumber: 01010026_1
🎄【Motors&Battery】Meteor75 Pro Features Updated Powerful 22000Kv 1102 Motors And Bt2.0 550Mah 1S Battery, Which Provides A Larger Capacity And Higher Discharge Rate, Bringing More Flight Time And Robust Flight Performance To The Quadcopter..
🎄【Camera&Canopy】Built-In 1.45G Ultralight And Upgraded C03 Fpv Camera. This New Camera Has Optimal Performance For Indoor Whoop Drones. Adopted With An Injection Molding Technique, This Canopy Is 1.60G Ultralight Weight And Is More Durable, Anti-Ruin, And Heat-Resistant, Providing Good Protection For The Whoop Drone..
🎄【Fc&Esc】Equipped With F4 1S 5A Flight Controller(Serial Elrs). The Elrs Rx Version Comes With The Default Elrs V3.0 Firmware. The Esc On The Board Is Powered By Bb51 Hardware In Place Of Bb21, And The Gyro To Bosh Bmi270 For Better Performance And Stability..
🎄【Frame&Propellers】Meteor75 Pro Brushless Whoop Frame Is Built For The Largest 1S Brushless Drone Quadcopter. Featuring Motor Holders For Convenient Installation, And It Is Perfect For 45Mm Propellers. This Combo Performs Very Precisely, Agile, And Fantastic Flying. It Greatly Enhances The Thrust For 1S Whoop..
Features
- Ultra-Powerful Meteor75 Pro 1S brushless whoop quadcopter is the largest available 1S whoop on the current market. It can offer pilots a faster, more responsive flight experience, and longer flight time, which would be ideal for FPV racing or acrobatic flying indoors or outdoors.
- Frame&Propellers Meteor75 Pro brushless whoop frame is built for the largest 1S brushless drone quadcopter. Featuring motor holders for convenient installation, and it is perfect for 45mm propellers. This combo performs very precisely, agile, and fantastic flying. It greatly enhances the thrust for 1S whoop.
- Motors&Battery Meteor75 Pro features updated powerful 22000KV 1102 motors and BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.
- FC&ESC Equipped with F4 1S 5A flight controller(Serial ELRS). The ELRS RX version comes with the default ELRS V3.0 firmware. The ESC on the board is powered by BB51 hardware in place of BB21, and the gyro to BOSH BMI270 for better performance and stability.
- Camera&Canopy Built-in 1.45g ultralight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones. Adopted with an injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 1.00 x 4.00 x 4.00 Inches
See On Amazon #8
BETAFPV ELRS LiteRadio 3 Radio Transmitter RC Controller, Support FPV Simulator, Joystick Calibration, USB Charging, Compatible for RC Models Like Multirotor Airplane FPV Drone Quadcopter - Mode 2
Asin: B09PV8C3D3 | Model: LiteRadio 3 | PartNumber: LiteRadio 3
🎄【Betafpv Configurator Supported】Literadio 3 Upgrades With Betafpv Self-Developed Customized Literadio System. Pilots Can Directly Operate The Joystick Calibration And Firmware Update On The Radio Transmitter Or Betafpv Configurator. Betafpv Configurator Is A Utility Designed To Simplify Updating, Configuring, And Tuning The Radio Transmitter. Easy And Convenient, Further Fulfilled Your Different Fly Requirement..
🎄【Please Note】The Default Firmware Of The Literadio 3 Radio Transmitter (Elrs 2.4G) Has Been Elrs V3 Since Jan 2024 Instead Of The Previous Version Elrs V2.0. Literadio 3 Radio Transmitter Elrs V3 No Longer Supports An External Tx Module ! ! !.
🎄【Fpv Simulator Supported】Literadio 3 Is Ergonomic And Has The Shape Of A Gaming Controller. The Rubber Coat Is Comfortable To Hold, And The Anti-Slip Texture On The Handles Allows For A Solid Grip. It Has The Function Of An Fpv Simulator Which Can Act As A Usb Joystick When Connected To A Pc, And Supports Most Of The Simulators On The Market With A Comprehensive Configuration..
🎄【Long Use Time】Equipped With A Built-In 2000 Mah 1S Battery And Charging Module, You Can Charge By Usb And It Can Work Up To 15 Hours Without An External Module. Meanwhile, It Designed A Low-Power Warning To Indicate A Low Battery. It Indicates A Low Battery And Needs To Be Re-Charged If The Blue Light Flashes Slowly And The Buzzer Beeps Continuously..
Features
- Nano Joystick Gimbal LiteRadio 3 has a newly designed Joystick Gimbal. With ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it has long longevity of up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight.
- Long Use Time Equipped with a built-in 2000 mAh 1S battery and charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously.
- BETAFPV Configurator Supported LiteRadio 3 upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter or BETAFPV Configurator. BETAFPV Configurator is a utility designed to simplify updating, configuring, and tuning the radio transmitter. Easy and convenient, further fulfilled your different fly requirement.
- FPV Simulator Supported LiteRadio 3 is ergonomic and has the shape of a gaming controller. The rubber coat is comfortable to hold, and the anti-slip texture on the handles allows for a solid grip. It has the function of an FPV simulator which can act as a USB Joystick when connected to a PC, and supports most of the simulators on the market with a comprehensive configuration.
- Please Note The default firmware of the LIteRadio 3 Radio Transmitter (ELRS 2.4G) has been ELRS V3 since Jan 2024 instead of the previous version ELRS V2.0. LiteRadio 3 Radio Transmitter ELRS V3 no longer supports an external TX Module ! ! !
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 3.35 x 8.27 x 6.30 inches
See On Amazon #9
BETAFPV 8pcs BT2.0 300mAh 1S Battery 3.8V 30C/60C FPV Lipo with 1.0mm Banana Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Cetus FPV Kit Meteor65 Micro Whoop Drone
Asin: B081C8LJHT | Model: BT2.0 300mAh 1 | PartNumber: BT2.0 300mAh 1
🎄【1.0Mm Banana Connector】1.0Mm Banana Connector Is More Durable In Terms Of Fit And Conductivity Than Crimped Pin. Highly Recommend To Use Our Newest Bt2.0 Connector To Get The Best Performance From This Bt2.0 300Mah 1S Battery.
🎄【Extra Adapter Cable】Pilots Can Charge Bt2.0 Battery By Ph2.0 Charger With Bt2.0-Ph2.0 Adapter Cable(Not Included), No Need To Buy Additional Bt2.0 Charger. But We Also Have Bt2.0 Battery Tester & Charger For Your Need.
🎄【Flight Time】Discharge Curve Is Higher Than Ph2.0 Battery Which Means It Can Discharge More Current In The Same Capacity And Provide More Power. You Can Get 2Mins Flight Time In Full Throttle On Meteor65.
🎄【Discharge Rate】The Discharge Of The Bt2.0 300Mah 1S Lipo Is Improved A Lot That The Voltage Drops More Slowly, So Pilots Can Enjoy More Flight Time Without Disturb Of Low Voltage Warning By Solving The Problem Of Voltage Sag.
Features
- 9A Continuous current BETAFPV exclusive designed BT2.0 Connector AKA 1.0mm Banana connector which can support 9A continuous current and 15A burst while the PH2.0 connector is just support 4.5A continuous current. With this 300mAh 1S BT2.0 battery, all 1S brushless drone will gain powerful and perform perfectly
- Discharge Rate The discharge of the BT2.0 300mAh 1S lipo is improved a lot that the voltage drops more slowly, so pilots can enjoy more flight time without disturb of low voltage warning by solving the problem of voltage sag
- 1.0mm Banana Connector 1.0mm Banana Connector is more durable in terms of fit and conductivity than crimped pin. Highly recommend to use our newest BT2.0 connector to get the best performance from this BT2.0 300mAh 1s battery
- Flight Time Discharge curve is higher than PH2.0 battery which means it can discharge more current in the same capacity and provide more power. You can get 2mins flight time in full throttle on Meteor65
- Extra Adapter Cable Pilots can charge BT2.0 battery by PH2.0 charger with BT2.0-PH2.0 adapter cable(NOT INCLUDED), no need to buy additional BT2.0 charger. But we also have BT2.0 Battery Tester & charger for your need
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 2.00 x 4.00 x 2.00 Inches | Weight: 0.02 pounds
See On Amazon #10
BETAFPV M03 Ultralight and High Output Power 25-350mW 5.8G VTX with IPX Type of Antenna Provides a Stable Image and Strong Transmission Compatible for ExpressLRS 2.4G 65-85mm Whoop Drone
Asin: B09L41L5RG
【Easy To Install】M03 Vtx Features A Jst0.8 Connector, Which Is Compatible With Camera Like Betafpv C02 And Newbeedrone Beeeye, Ipx Type Of Antenna Can Be Pluggable To Vtx Directly. Plug-And-Play Makes It Easy To Install Without Soldering.
【Smartaudio】M03 Vtx Could Use The Smart Audio Port To Change The Band And Channel, The Output Power Could Be Changed Via The Power Button And The Osd Men.
【Ultralight】M03 5.8G Vtx Has A Tiny Size And 1.13G Ultra-Lightweight, Is Perfectly Suitable For The 65-85Mm Whoop Drone. The Screw Mounting Holes Pattern Is Match With Betafpv Micro Canopy.
【Application】M03 Vtx Is Perfectly Suitable For The 65-85Mm Whoop Drone For Longer Range Flying. We Highly Recommend Using It With Elrs 2.4G Fc Board, Like F4 1S 5A Fc (Elrs 2.4G) Or F4 1S 12A Fc (Elrs 2.4G).
Features
- High Output Power The switchable power of BETAFPV M03 5.8G VTX includes 25mW, 100mW, 200mW and 350mW, achieves long-range flying, provides a stable image and strong transmission for tiny drones to explore more possibilities and fun
- Application M03 VTX is perfectly suitable for the 65-85mm whoop drone for longer range flying. We highly recommend using it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G)
- Easy to Install M03 VTX features a JST0.8 connector, which is compatible with camera like BETAFPV C02 and NewBeeDrone BeeEye, IPX type of antenna can be pluggable to VTX directly. Plug-and-play makes it easy to install without soldering
- Ultralight M03 5.8G VTX has a tiny size and 1.13g ultra-lightweight, is perfectly suitable for the 65-85mm whoop drone. The screw mounting holes pattern is match with BETAFPV micro canopy
- SmartAudio M03 VTX could use the Smart Audio port to change the band and channel, the output power could be changed via the power button and the OSD men
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.79 x 1.97 x 1.97 Inches
See On Amazon #11
BETAFPV 2pcs Meteor85 85mm Micro Brushless Whoop Frame Kit for Meteor85 2S Brushless FPV Whoop Drone Quadcopter Compatible for 110x Motors Whoop Style FC Board - Black&Grey
Asin: B0BR3K1Q8Y | Model: 01090014_3 | PartNumber: 01090014_3
Meteor85 Frame’S Motor Mounting Position Uses A Triangle Bilateral Stretch Structure, Making The Frame More Aesthetic. It Provides You More Durable And Smoother Flight Experience..
The Frame Is Suitable For 2" Propellers Like Gemfan 2015 2-Blade, Gemfan 2020 4-Blade Props..
The Ultra-Light And Durable Frame Is Pp Material Only 11.32G, Which Can Match The F4 1-2S 12A Aio Brushless Flight Controller..
With The Low Profile Of Battery Slot Height, The Drone's Gravity Center Is Reduced, And Improved The Sense Of Compactness..
Features
- The new design frame reserves a battery slot, making it conveniently free from the battery strap and perfect for BETAFPV 450mAh 2S battery compared to the previous 85mm whoop frame.
- With the low profile of battery slot height, the drone's gravity center is reduced, and improved the sense of compactness.
- Meteor85 frame s motor mounting position uses a triangle bilateral stretch structure, making the frame more aesthetic. It provides you more durable and smoother flight experience.
- The ultra-light and durable frame is PP material only 11.32g, which can match the F4 1-2S 12A AIO Brushless Flight Controller.
- The frame is suitable for 2 propellers like Gemfan 2015 2-Blade, Gemfan 2020 4-Blade props.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 1.18 x 6.10 x 6.10 Inches
See On Amazon #12
BETAFPV 2pcs Meteor75 Pro Brushless Whoop Frame | Triangle Bilateral Stretch Structure Motor Holder Hole | Larger Lipo Battery Slot for 45mm Propellers 550mAh 1S Lipo 0802SE 1102 Series Motors
Asin: B0BZPN837L | Model: fgllu-1526 | PartNumber: fgllu-1526
Battery Slot: The Battery Slot From The Meteor75 Pro Frame Has Been Improved With A Larger Size Of 16.7 Mm X 6.3 Mm. Pilots Can Use A Larger 1S Battery With More Capacity Like Bt2.0 550 Mah 1S Lipo Battery..
Recommended Parts: The Meteor75 Pro Frame Is Completely An Upgrade Choice For Pilots Who Fly Meteor65, Meteor 65 Pro, Or Meteor 75 Brushless Quadcopter. The Electronic Parts Are Compatible With It Such As The F4 1S 5A Flight Controller. Just Get 45 Mm Props And Recommend 1102 Motors For More Power..
Material And Weight: Meteor75 Pro Brushless Whoop Frame Is Made Of Pp Material, It Is Durable Enough With A Lightweight Of 7.73 G..
Motor Holder: The Motor Holder Uses A Triangle Bilateral Stretch Structure, Increasing The Triangle Screw Hole, Extremely Convenient For Motor Installation. Flying Is Also More Stable When The Quadcopter Is At High Speed. Recommend Motors With Triangle Mount Like 1102, 0802Se Brushless Motors..
Features
- Meteor75 Pro Frame: Meteor75 Pro brushless whoop frame is built for the largest 1S brushless drone quadcopter. Perfect for 45 mm propellers. This combo performs very precise, agile, and fantastic flying. It greatly enhances the thrust for 1S whoop, especially when carrying HD digital VTX.
- Motor holder: the motor holder uses a triangle bilateral stretch structure, increasing the triangle screw hole, extremely convenient for motor installation. Flying is also more stable when the quadcopter is at high speed. Recommend motors with triangle mount like 1102, 0802SE brushless motors.
- Battery slot: the battery slot from the Meteor75 Pro frame has been improved with a larger size of 16.7 mm x 6.3 mm. Pilots can use a larger 1S battery with more capacity like BT2.0 550 mAh 1S lipo battery.
- Material and weight: Meteor75 Pro brushless whoop frame is made of PP material, it is durable enough with a lightweight of 7.73 g.
- Recommended parts: the Meteor75 Pro frame is completely an upgrade choice for pilots who fly Meteor65, Meteor 65 Pro, or Meteor 75 brushless quadcopter. The electronic parts are compatible with it such as the F4 1S 5A flight controller. Just get 45 mm props and recommend 1102 motors for more power.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 1.18 x 6.10 x 6.10 Inches
See On Amazon #13
BETAFPV Meteor65 Pro 1S Brushless Whoop Frame Kit Green with 2 Sets 35mm 3-Blade Propeller 1.0mm Shaft White for 65mm Meteor65 Pro 1S Brushless Micro Racing Whoop Drone Quadcopter
Asin: B09LQJ51XK
【Apprerance Design】Meteor65 Pro Frame Motor Mounting Position Uses A Triangle Bilateral Stretch Structure, Making The Frame More Aesthetic. It Provides You More Durable And Smoother Flight Experience.
【Compatible Propellers】The Frame Is Suitable For 31-35Mm Propeller Like Gemfan 35Mm-3 Propellers. Pay Attention, Hq 35Mm Propellers Is A Little Bit Bigger And Do Not Fit For This Frame.
【Material&Weight】The Ultra-Light And Durable Frame Is Pp Material Only 3.22G, Which Is One Of The Lightest Frames That Can Match The F4 1S 5A Aio Brushless Flight Controller (Elrs 2.4G).
【Suitable Flight Controller】The Space For The Fc Board Is Limited In Order To Support 35Mm Propellers On A 65Mm Drone. So This Meteor65 Pro Frame Could Only Support Cross Shape Fc Board. The Normal Whoop Fc Board Do Not Fit This Frame.
Features
- Meteor65 Pro Frame Compared to the previous 65mm brushless frames, Meteor65 Pro frame with the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness
- Suitable Flight Controller The space for the FC board is limited in order to support 35mm propellers on a 65mm drone. So this Meteor65 Pro frame could only support cross shape FC board. The normal whoop FC board DO NOT fit this frame
- Apprerance Design Meteor65 Pro frame motor mounting position uses a triangle bilateral stretch structure, making the frame more aesthetic. It provides you more durable and smoother flight experience
- Material&Weight The ultra-light and durable frame is PP material only 3.22g, which is one of the lightest frames that can match the F4 1S 5A AIO Brushless Flight Controller (ELRS 2.4G)
- Compatible Propellers The frame is suitable for 31-35mm propeller like Gemfan 35mm-3 propellers. Pay attention, HQ 35mm propellers is a little bit bigger and DO NOT fit for this frame
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 2.36 x 4.72 x 4.72 Inches | Weight: 0.04 Pounds
See On Amazon #14
BETAFPV ELRS LiteRadio 2 SE Radio Transmitter Remote Controller with Built-in 1000mAh 1S Battery for FPV RC Racing Drones Multirotor Simulator Joystick Calibration - Mode 2 ExpressLRS V3
Asin: B09CTHBWDR | Model: LiteRadio 2 SE ELRS | PartNumber: LiteRadio 2 SE ELRS
🎄【Performance】This Elrs 2.4G Protocol Radio Transmitter Built-In 1000Mah 1S Battery, You Can Charge It By Type-C Cable Instead Of Replacing Battery. It Has A Total Of 8 Channels. Supports 3 Rf Powers Of 25Mw, 50Mw And 100Mw, And Packet Rates Of 50Hz, 150Hz, 250Hz And 500Hz.
🎄【About Bind】Please Note That The Firmware Version Of The Transmitter And The Receiver Or The Tx Module Should Be The Same One And Then Could Be Bound Together. If You Don't Know The Firmware Version, Please Contact Us Directly And We Will Solve The Problem For You..
🎄【Expresslrs 2.4G Protocol】Betafpv Expresslrs 2.4G Literadio 2 Se Radio Transmitter Comes With Built-In Elrs 2.4G Tx, Which Can Achieve Long-Range Flying With Your Drones. Please Note, The Elrs Firmware Is Elrs 3.X, It Can't Be Bound With Your Equipment With Elrs 2.X Version..
🎄【Fpv Simulator】This Transmitter Has The Function Of Fpv Simulator Like Other Versions Of Literadio 2, Which Can Act As A Usb Joystick When Connected To A Personal Computer, Suitable For Fpv Novices To Play Fpv Simulators Like Ereadrone.
🎄【Betafpv Configurator】This Transmitter Supported Betafpv Configuration With The Function Of Radio Controller Setup, Full Function Of The Expresslrs Configuration, Channel Mixer For Fix Wing Drones, And Firmware Update.
Features
- Firmware Version This LiteRadio 2 SE Transmitter's firmware is ELRS V3, it can't be bound with your equipment with ELRS 2.X version. Please make sure the receiver or the TX module has same firmware version and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you.
- BETAFPV Configurator This transmitter supported BETAFPV Configuration with the function of radio controller setup, Full function of the ExpressLRS configuration, Channel mixer for fix wing drones, and firmware update
- Performance This ELRS 2.4G protocol radio transmitter built-in 1000mAh 1S battery, you can charge it by type-c cable instead of replacing battery. It has a total of 8 channels. Supports 3 RF powers of 25mW, 50mW and 100mW, and packet rates of 50Hz, 150Hz, 250Hz and 500Hz
- FPV Simulator This transmitter has the function of FPV simulator like other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE
- About Bind Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you.
- ExpressLRS 2.4G Protocol BETAFPV ExpressLRS 2.4G LiteRadio 2 SE radio transmitter comes with built-in ELRS 2.4G TX, which can achieve long-range flying with your drones. Please note, The ELRS firmware is ELRS 3.X, it can't be bound with your equipment with ELRS 2.X version.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 3.15 x 6.50 x 4.72 inches
See On Amazon #15
BETAFPV Literadio 2 SE Frsky D16 Transmitter Left Throttle RC Remote Controller Built-in 2000mAh Battery with FPV Simulator Function for FPV Racing Drone
Asin: B08PV3QRTG | Model: 00313686 | PartNumber: 00313686
【Built-In Battery】 The Literadio 2 Se Continued Working Time For A Fully Charged Battery Is About 8 Hours, Bringing An Excellent Endurance Performance And Enjoy Control..
【System Upgrade】Updates With Betafpv Self-Developed Literadio System. Player Can Directly Operate The Joystick Calibration And Upgrade Firmware On The Radio Transmitter，Which Is More Convenient For The Beginner Racer To Operate..
【Joystick Calibration】 Manually Calibrate The Joystick. The Literadio 2 Se Joystick Data May Offset And Can Calibrate After It Has Been Used For A Period Of Time (If Joysticks Are Hit By Physical)..
【Fpv Simulator】Compared With Other Remote Controllers, Literadios 2Se Has The Function Of Fpv Simulator Which Can Acts As A Usb Joystick When Connected To A Personal Computer. So You Could Use It To Play Fpv Simulators Like Ereadrone..
Features
- BETAFPV Firmware D16 protocol does not support the Frsky receivers with ACCST 2.0 firmware or higher, and it can only bind with ACCST 1.X firmware version XM+ receivers.
- FPV Simulator Compared with other remote controllers, LiteRadios 2SE has the function of FPV simulator which can acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE.
- Built-in Battery The LiteRadio 2 SE continued working time for a fully charged battery is about 8 hours, bringing an excellent endurance performance and enjoy control.
- Joystick Calibration Manually calibrate the joystick. The LiteRadio 2 SE joystick data may offset and can calibrate after it has been used for a period of time (if joysticks are hit by physical).
- System Upgrade Updates with BETAFPV self-developed LiteRadio System. Player can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter which is more convenient for the beginner racer to operate.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.20 x 0.39 x 0.31 Inches | Weight: 0.22 Pounds
See On Amazon #16
BETAFPV 4pcs 1102 22000KV Brushless Motor 1S Lightweight FPV Drone Motor Compatible for F4 1S 5A/12A Flight Controller 75mm Whoop Drone Like Meteor75 1S Racing Drone Cetus Pro Quadcopter
Asin: B0BWRR93LP | Model: 01050006_2 | PartNumber: 01050006_2
With Exquisite Workmanship, Provides The Most Incredible Power And Thrust In The Lightest Weight Of 2.79G, Sturdy Structure, And High-Quality Materials Make It Performs Like A Beast..
Coming With A New Appearance Of The Black And Red Motor Bell. Lead Wire Is Soldered To The Pcb, Which Allows You To Repair It Easier Once Disconnected..
22000Kv Has A Higher Rpm And Faster Response, Which Allows The Quadcopter To Take Off With More Punch At Less Throttle. More Aggressive And Powerful For Fpv Racing. For Pilots Who Fly 75Mm Whoop Drones With 18000Kv Motors, It Is A Good Choice To Upgrade Motors To 22000Kv..
Possesses Dynamic Balance, And Crush-Resistant Damping Bearing, Which Can Eliminate Vibration Effectively. Features Great Work Efficiency For Flying Endurance, Very Suitable For 75Mm 1S Fpv Cruising Flying.
Features
- Adopts the technology of ball bearing, which effectively reduced the friction between the bearing surfaces, increased the duration of the motor, and improved its efficiency.
- Possesses dynamic balance, and crush-resistant damping bearing, which can eliminate vibration effectively. Features great work efficiency for flying endurance, very suitable for 75mm 1S FPV cruising flying
- With exquisite workmanship, provides the most incredible power and thrust in the lightest weight of 2.79g, sturdy structure, and high-quality materials make it performs like a beast.
- 22000KV has a higher RPM and faster response, which allows the quadcopter to take off with more punch at less throttle. More aggressive and powerful for FPV racing. For pilots who fly 75mm whoop drones with 18000KV motors, it is a good choice to upgrade motors to 22000KV.
- Coming with a new appearance of the black and red motor bell. Lead wire is soldered to the PCB, which allows you to repair it easier once disconnected.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.55 x 1.97 x 0.55 Inches | Weight: 0.03 Pounds
See On Amazon #17
BETAFPV 4pcs Lava 450mAh 1S 3.8V 75C LiHV FPV Lipo Battery with BT2.0 Connector for 1-2S FPV Tiny Whoop Drone Quadcopters Like Meteor75, Meteor75 Pro, Cetus Pro 1S Brushless Drones, Cetus X 2S Quad
Asin: B0CPDJYCGB
【Performance】With An Extended Battery Cycle Life, It Ensures Prolonged Power Support, Bringing Users Sustained And Reliable Performance..
【Suitable】 Lava 1S 450Mah Lipo Battery Is Suitable For 1-2S Fpv Tiny Whoop Drone Like Cetus Pro, Cetus X, Meteor75, Meteor75 Pro And Other 1-2S Fpv Racing Drone..
【Design】Lava 1S 450Mah Lipo Battery Comes With Bt2.0 Connector And Features A New Design That Symbolizes Explosive Power Akin To Molten Lava..
【High C-Rate】With A Boosted Discharge Rate Of 75C, It Provides Greater Burst Power For Superior Flight Performance And Maneuverability For Unparalleled Control..
Features
- Z-Folding Process LAVA series batteries feature a Z-Folding Process, which enables efficient high-current discharge within shorter time frames, resulting in elevated discharge platforms. Compared to the Winding Process, it achieves a 0.2V higher discharge platform under equivalent loads and boasts a 5% higher energy density within the same volume, extending flight time and reducing battery replacement inconvenience.
- High C-Rate With a boosted discharge rate of 75C, it provides greater burst power for superior flight performance and maneuverability for unparalleled control.
- Performance With an extended battery cycle life, it ensures prolonged power support, bringing users sustained and reliable performance.
- Design LAVA 1S 450mAh Lipo Battery comes with BT2.0 connector and features a new design that symbolizes explosive power akin to molten lava.
- Suitable LAVA 1S 450mAh Lipo Battery is suitable for 1-2S FPV Tiny Whoop drone like Cetus Pro, Cetus X, Meteor75, Meteor75 Pro and other 1-2S FPV racing drone.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.28 x 2.36 x 0.63 inches
See On Amazon #18
BETAFPV C03 FPV Micro Camera 1/3'' CMOS Sensor 1200TVL with Global WDR 2.1mm Lens 160 FOV NTSC 4:3 for Indoor Micro Whoop Drone Quadcopter like Meteor Series Drones and BETAFPV Micro Canopy
Asin: B0BMVFGHB1 | Model: 01060007 | PartNumber: 01060007
【Lightweight】Miniature, And Lightweight Design, Weighing Only 1.52G. Completely Match With M03 Vtx On Micro Whoop Drone Quadcopter Like Meteor Series Drones And Most Of Micro Whoop Drones In The Market. Pilots Can Enjoy Good Image Quality While Reducing The Weight Of The Whoop Drone..
【Material】Made Of High-Quality Abs Material, Highly Recommend Use With Betafpv Micro Canopy. Looks Attractive, Mdurable And Not Easy To Break..
【Convenient】C03 Fpv Micro Camera Features A Jst-0.8 Connector, A Special Design In Plug-And-Play That Makes It Easy To Install Without Soldering. Suitable For Betafpv F4 1S 5A Aio Flight Controller And Nbd Beebrain Fc..
【Performance】2.1Mm Lens, Fov 160° Beyond The Wide Angle For Recording More Wide And Beautiful Scenes. 4:3 Aspect Ratio, Shooting Clear Dynamic Images Even In Low Light Conditions, Bringing The Pilot An Excellent Visual Experience..
Features
- Equipment BETAFPV C03 FPV micro camera comes with 1200TVL resolution with Global WDR and 1/3" CMOS sensor, it ensures a high-quality and clear image.
- Performance 2.1mm lens, FOV 160 beyond the wide angle for recording more wide and beautiful scenes. 4:3 aspect ratio, shooting clear dynamic images even in low light conditions, bringing the pilot an excellent visual experience.
- Lightweight Miniature, and lightweight design, weighing only 1.52g. Completely match with M03 VTX on micro whoop drone quadcopter like Meteor series drones and most of micro whoop drones in the market. Pilots can enjoy good image quality while reducing the weight of the whoop drone.
- Convenient C03 FPV micro camera features a JST-0.8 connector, a special design in plug-and-play that makes it easy to install without soldering. Suitable for BETAFPV F4 1S 5A AIO Flight Controller and NBD BeeBrain FC.
- Material Made of high-quality ABS material, highly recommend use with BETAFPV micro canopy. Looks attractive, mdurable and not easy to break.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.79 x 2.17 x 2.17 inches
See On Amazon #19
BETAFPV Meteor65 Pro 1S Micro FPV Whoop Drone Quadcopter for FPV Racing Flight Indoor Outdoor with F4 1S 5A Flight Controller 0802SE 19500KV Motor 35mm 3-Blade Propellers C03 Camera - ELRS
Asin: B0BMVGQLX4 | Model: 01010022_1 | PartNumber: 01010022_1
🎄【Frame&Propeller】Meteor65 Pro Frame Has The Same Perfect Performance As The Popular Meteor65 Frame. The Lightest Lower Profile 65Mm Frame To Fit 35Mm Propellers. The Battery Slot Is Closer To The Center Of Gravity For A Smoother Flying Experience, And You Will Land On The Motor Screws Instead Of The Battery..
🎄【Bt2.0 Connector】Bt2.0 Connector Has Decreased Internal Resistance Of Connector Effectively Allowing More Current To Be Transferred, Which Means It Supports 9A Continuous Current (15A Burst). Pilots Can Enjoy More Flight Time Without Disturbing Low Voltage Warning Due To Reducing Voltage Sag. Get Stronger Power And Longer Flight Time On 1S Brushless Drones..
🎄【Camera&Canopy】Built-In 1.52G Ultralight Weight C03 Camera, Offer A High-Quality, Clear And Sharper Images To Pilots. Adopted With A Injection Molding Canopy Which Only 1.60G, More Durable, Anti-Ruin, And Heat-Resitant, Gives Your Whoop Drone A Good Protection..
🎄【Power System】By Using The Latest 0802Se 19500Kv Motors And 35Mm 3-Blade Props, This Equipment Ensures Excellent Performance Of Power And Thrust. Makes The Perfect Dynamic Balance, Which Gives The Drone More Flexibility And Longer Flying Time..
Features
- F4 1S 5A FC The flight controller of Meteor65 Pro has been upgraded to F4 1S 5A Serial ELRS V3.0, which can be updated via Wi-Fi or Betaflight serial passthrough. Pilots can flash any version of ELRS RX firmware without updating FC firmware. With a high-quality BMI270 gyro and BB51 ESC hardware. In addition, this new board supports the Betaflight Blackbox function.
- Power System By using the latest 0802SE 19500KV motors and 35mm 3-blade props, this equipment ensures excellent performance of power and thrust. Makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time.
- Frame&Propeller Meteor65 Pro frame has the same perfect performance as the popular Meteor65 frame. The lightest lower profile 65mm frame to fit 35mm propellers. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.
- Camera&Canopy Built-in 1.52g ultralight weight C03 camera, offer a high-quality, clear and sharper images to pilots. Adopted with a injection molding canopy which only 1.60g, more durable, anti-ruin, and heat-resitant, gives your whoop drone a good protection.
- BT2.0 Connector BT2.0 connector has decreased internal resistance of connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). Pilots can enjoy more flight time without disturbing low voltage warning due to reducing voltage sag. Get stronger power and longer flight time on 1S brushless drones.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 2.76 x 4.72 x 4.72 inches | Weight: 0.50 pounds
See On Amazon #20
BETAFPV 4pcs 0802SE 23000KV Brushless Motor 1S Lightweight FPV Drone Motor Compatible for Indoor FPV Racing 65/75mm 1S Brushless Whoop Quadcopters Like Meteor65 Pro Meteor75 Drones
Asin: B0BWRZ8WTY | Model: 01050007_2 | PartNumber: 01050007_2
【Application】0802Se 23000Kv 1S Brushless Motor Is Not Only Suitable For 31Mm Propellers But Also Suits 35Mm, And 40Mm Propellers With 1.0Mm Shaft Hole. Compatible With Brushless Frames Like Meteor65, Meteor65 Pro, And Meteor75..
【Connector】With Brass Bushings Bearing. Lead Wire Is Soldered To The Pcb, Allowing Pilots To Repair It Easier Once Disconnected..
【Appearance】0802Se 23000Kv Brushless Motor Comes With A Completely New Look. The Whole Motors Show A Silver Color In The Air, Looking Very Nice..
【Flexibility】0802Se Motor Makes The Perfect Dynamic Balance, Which Gives The Drone More Flexibility And Longer Flying Time. With Its Lightweight Of 1.8G/Pc, It Is Ideal For The Weight-Sensitive 65Mm Brushless Whoop Drone..
Features
- Performance Compared with the 0802SE 19500KV motor, the 0802SE 23000KV with higher RPM (revolutions per minute), and less throttle for the stronger thrust has a faster response time, improving the speed of the whoop drone, suitable for aggressive indoor FPV racing.
- Flexibility 0802SE motor makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time. With its lightweight of 1.8g/pc, it is ideal for the weight-sensitive 65mm brushless whoop drone.
- Application 0802SE 23000KV 1S brushless motor is not only suitable for 31mm propellers but also suits 35mm, and 40mm propellers with 1.0mm shaft hole. Compatible with brushless frames like Meteor65, Meteor65 Pro, and Meteor75.
- Appearance 0802SE 23000KV Brushless Motor comes with a completely new look. The whole motors show a silver color in the air, looking very nice.
- Connector With brass bushings bearing. Lead wire is soldered to the PCB, allowing pilots to repair it easier once disconnected.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.59 x 1.73 x 0.43 Inches | Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search