Saw Bandpass Filter 1420MHz Bandpass Filter Module 80MHz Bandwidth 50 Ohms Band Pass Filter for Radio Astronomy Electronic Component
Asin: B0BQYYQ423 | Model: Luqeegwc6einbxp3 | PartNumber: Luqeegwc6einbxp3
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Loss And Power: Strip Insertion Loss Is Less Than 3.5Db, Maximum Load Power For 10Mw (10Dbm), Interface Contain Sma M And Sma F.
Technical Parameters: The Saw Filter Has A Bandwidth Of 80Mhz, Low Insertion Loss, Steep Cut Off Characteristic, Impedance Of 50Ohms.
Effective And Reliable: Used For Performance Optimization Of 1420Mhz Receiver, Which Can Effectively Filter Out Out Of Band , Reduce Noise And Increase Dynamic Range.
Strong Aluminum Alloy: Adopt Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use.
Features
- EXCELLENT PERFORMANCE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote outside the band, and performance is far better than that of the products made with PCB bare board
- STRONG ALUMINUM ALLOY: Adopt aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use
- LOSS AND POWER: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), interface contain SMA M and SMA F
- EFFECTIVE AND RELIABLE: Used for performance optimization of 1420MHz receiver, which can effectively filter out out of band , reduce noise and increase dynamic range
- TECHNICAL PARAMETERS: The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic, impedance of 50Ohms
- See more on Amazon...
Brand: Luqeeg | Manufacturer: Luqeeg
See On Amazon Similar To Saw Bandpass Filter 1420MHz Bandpass
#1
CXNM Urethane Band Saw Tires 14 inch x 1 inch x .095 2 Pack No Adhesive Needed Compatible with Jet Grizzly, Powermatic Band Saws
Asin: B0BY7FWDFL | Model: B-14 | PartNumber: B-14 | Ean: 0730628649885 | UPC: 730628649885
No Adhesive Is Needed For Proper Installation. Urethane Tires Are Specifically Designed To Stay In Place Without Any Type Of Adhesive And Can Be Stretched To Fit. This Makes Them Even Easier To Install And Even Easier To Remove If Necessary..
Excellent Performance: Preciseblade Tracking, Superior Noise Reduction And Shockabsorption.
Wide Range Of Compatibility - Fits Jet Jwbs-14Dxpro, Jwbs-14Cs, Jwbs14os, Grizzly G0457 G0555 G0555p G0555x G0580 T21005 G1019 G1019z, & Powermatic Pwbs-14, Pwbs-14Cs. Anyother Need A 14 X 1 X 0.095-Inch Tire.
Longer Life – Made Of Urethane, The Long-Lasting Upgrade To Rubber Belts, Urethane Band Saw Tires Most Certainly Outlast Rubber Band Saw Tires And Plastic Band Saw Tires. Urethane Band Saw Tires Will Not Dry Rot Like Rubber Or Plastic Tires. This Alone Provides You With An Exceptional Value Over Other Types Of Band Saw Tires.From Improved Performance And Safety To Reduced Downtime..
Features
- Urethane Bandsaw Tires 14 x 1 x .095 , 2 pack, They can be installed on any 14 band saw that requires a 1 wide and 3/32 thick tire.
- Longer life Made of Urethane, The long-lasting upgrade to rubber belts, Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw tires. Urethane band saw tires will not dry rot like rubber or plastic tires. This alone provides you with an exceptional value over other types of band saw tires.From improved performance and safety to reduced downtime.
- No adhesive is needed for proper installation. Urethane tires are specifically designed to stay in place without any type of adhesive and can be stretched to fit. This makes them even easier to install and even easier to remove if necessary.
- Wide Range of Compatibility - Fits Jet JWBS-14DXPRO, JWBS-14CS, JWBS14OS, Grizzly G0457 G0555 G0555P G0555X G0580 T21005 G1019 G1019Z, & Powermatic PWBS-14, PWBS-14CS. Anyother need a 14 x 1 x 0.095-inch tire
- Excellent performance: preciseblade tracking, superior noise reduction and shockabsorption
- See more on Amazon...
Brand: CXNM | Manufacturer: CXNM
See On Amazon #2
Bandpass Filter, Antiinterference Bandpass Filter, Installation for System Receiver
Asin: B0C6PD5PYP | Model: CUIFATIfokeuicnzt | PartNumber: CUIFATIfokeuicnzt
Made Of Aluminum Alloy Material, Light Weight, Oxidation Resistance, Resistance..
With High Reliability, Stable And Reliable Working Performance, Sma Interface, Easy To Use..
Wide Compatibility, Can Be Used For Receivers, As Well As Wifi, Bt, Systems,Anti Interference..
Increase Service Life, One Piece Molding, No Burrs, Smoother , Smoother Installation..
Features
- Easy to debug, good selectivity, good stability, center frequency 1.575GHZ, used for GPS positioning.
- Increase service life, one piece molding, no burrs, smoother , smoother installation.
- Made of aluminum alloy material, light weight, oxidation resistance, resistance.
- Wide compatibility, can be used for receivers, as well as WiFi, BT, systems,anti interference.
- With high reliability, stable and reliable working performance, SMA interface, easy to use.
- See more on Amazon...
Brand: Cuifati | Manufacturer: CUIFATI
See On Amazon #3
1090 MHz Bandpass Filter, 50 Ohms Impedance Saw Safe Bandpass Filter Replacement Cutoff Features for Maintenance
Asin: B0BQWQ6169 | Model: RTLRp7v92qgkwc | PartNumber: RTLRp7v92qgkwc | Ean: 7424226829512
【Passband Bandwidth 30Mhz】--- This Filter Provides Guaranteed Passband Bandwidth Of 30Mhz With Low Insertion Loss And Steep Cutoff Characteristics..
【Applicable Scenarios】--- Our Bandpass Filter Is Used For Performance Optimization Of Ads B Receivers At 1090Mhz. No Out Of Band Spurious Response..
【Out Of Band Signal Filtering】--- The Bandpass Filter Effectively Filters Out Of Band Signals To Reduce Noise, Increase Dynamic Range And Improve Stability..
【Anti Interference】--- Our Band Pass Filter Is Anti Interference, Practical, Light In Overall Weight, Easy To Install And Friendly To Novices..
Features
- Aluminum Alloy Material --- The bandpass filter is made of aluminum alloy with excellent craftsmanship and is very safe to use.
- Anti Interference --- Our band pass filter is anti interference, practical, light in overall weight, easy to install and friendly to novices.
- Passband Bandwidth 30MHz --- This filter provides guaranteed passband bandwidth of 30MHz with low insertion loss and steep cutoff characteristics.
- Out of Band Signal Filtering --- The bandpass filter effectively filters out of band signals to reduce noise, increase dynamic range and improve stability.
- Applicable Scenarios --- Our bandpass filter is used for performance optimization of ADS B receivers at 1090MHz. No out of band spurious response.
- See more on Amazon...
Brand: RTLR | Manufacturer: RTLR
See On Amazon #4
Bandpass Filter 1420MHz, 80MHz Bandwidth Saw Bandpass Filter Increase Dynamic Range for Radio Astronomy
Asin: B0BQMSRFSH | Model: Cosikiofui8kbzvw | PartNumber: Cosikiofui8kbzvw
Technical Parameters: The Saw Filter Has A Bandwidth Of 80Mhz, Low Insertion Loss, Steep Cut Off Characteristic, Impedance Of 50Ohms.
Loss And Power: Strip Insertion Loss Is Less Than 3.5Db, Maximum Load Power For 10Mw (10Dbm), Interface Contain Sma M And Sma F.
Effective And Reliable: Used For Performance Optimization Of 1420Mhz Receiver, Which Can Effectively Filter Out Out Of Band , Reduce Noise And Increase Dynamic Range.
Strong Aluminum Alloy: Adopt Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use.
Features
- EXCELLENT PERFORMANCE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote outside the band, and performance is far better than that of the products made with PCB bare board
- STRONG ALUMINUM ALLOY: Adopt aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use
- TECHNICAL PARAMETERS: The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic, impedance of 50Ohms
- EFFECTIVE AND RELIABLE: Used for performance optimization of 1420MHz receiver, which can effectively filter out out of band , reduce noise and increase dynamic range
- LOSS AND POWER: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), interface contain SMA M and SMA F
- See more on Amazon...
Brand: Cosiki | Manufacturer: Cosiki
See On Amazon #5
1420 MHz Bandpass Filter Effective Saw Bandpass Filter PCB Board for Radio Astronomy
Asin: B0BS3D6H6R | Model: VINGVOs4u3p0e1oi | PartNumber: VINGVOs4u3p0e1oi
Strong Aluminum Alloy: Adopt Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use.
Loss And Power: Strip Insertion Loss Is Less Than 3.5Db, Maximum Load Power For 10Mw (10Dbm), Interface Contain Sma M And Sma F.
Technical Parameters: The Saw Filter Has A Bandwidth Of 80Mhz, Low Insertion Loss, Steep Cut Off Characteristic, Impedance Of 50Ohms.
Excellent Performance: This Product Is Made Of Ultra Thin Pcb Board Inside, Which Still Has Excellent Inhibition Ability To The Remote Signal Outside The Band, And Performance Is Far Better Than That Of The Products Made With Pcb Bare Board.
Features
- EFFECTIVE AND RELIABLE: Used for performance optimization of 1420MHz receiver, which can effectively filter out out of band signals, reduce noise and increase dynamic range
- EXCELLENT PERFORMANCE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote signal outside the band, and performance is far better than that of the products made with PCB bare board
- STRONG ALUMINUM ALLOY: Adopt aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use
- TECHNICAL PARAMETERS: The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic, impedance of 50Ohms
- LOSS AND POWER: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), interface contain SMA M and SMA F
- See more on Amazon...
Brand: VINGVO | Manufacturer: VINGVO
See On Amazon #6
Rakstore 137MHz Saw BPF Band Pass Filter
Asin: B09BCP67MJ | Ean: 0794304783461 | UPC: 794304783461
Size: 8*22Mm Without Connector.
Brand: Rakstore | Manufacturer: Rakstore
See On Amazon #7
Saw Bandpass Filter, Saw Bandpass Filter 50Ohms Impedance 1420MHz Module 80MHz Bandwidth SMA Interface Electronic Component for Radio Astronomy, Video
Asin: B0CYY8WKC6 | Model: Hyuduoo9bkc8h2u5 | PartNumber: Hyuduoo9bkc8h2u5
Interface: The Interface Of This Saw Filter Is Sma M And Sma F. The Saw Filter Has A Bandwidth Of 80Mhz, Low Insertion Loss, Steep Cut Off Characteristic..
Information Of Product: Strip Insertion Loss Is Less Than 3.5Db, Maximum Load Power For 10Mw (10Dbm), Impedance Of This Saw Bandpass Filter Is 50Ohms..
Material: This Saw Bandpass Filter Adopted Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use.
Ultra Thin Pcb Board Inside: This Product Is Made Of Ultra Thin Pcb Board Inside, Which Still Has Excellent Inhibition Ability To The Remote Outside The Band, And Performance Is Far Better Than That Of The Products Made With Pcb Bare Board.
Features
- SUITABLE FOR: This SAW bandpass filter is used for performance optimization of 1420MHz receiver, which can effectively filter out out of band , reduce noise and increase dynamic range
- ULTRA THIN PCB BOARD INSIDE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote outside the band, and performance is far better than that of the products made with PCB bare board
- INTERFACE: The interface of this saw filter is SMA M and SMA F. The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic.
- MATERIAL: This SAW bandpass filter adopted aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use
- INFORMATION OF PRODUCT: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), impedance of this SAW bandpass filter is 50Ohms.
- See more on Amazon...
Brand: Hyuduo | Manufacturer: Hyuduo
See On Amazon #8
Saw Bandpass Filter Coaxial Alloy Alloy Filtered Alloy Band Pass
Asin: B0CSMD6Z2M | Model: ZIZEV4go1hqgmz3 | PartNumber: ZIZEV4go1hqgmz3
Multi Functional: Integrating Components, Filters, Radio Frequency And Coaxial, Functions To Meet Your Various Needs.
Interference Reduction: The Filter Can Effectively The Interference Of 1.2G Map Transmission To 2.4G And 5.8G Devices Such As 2.4G Receivers And Increase The Distance..
Alloy Shell: This Filter Uses Alloy Shielding Shell, Anti Interference, No Out Of For Band Spurious Response, Compact And Sturdy, Easy To Use..
Easy To Use And Carry: This Receiver Bandpass Filter Is Compact And Standard, Lightweight And Rugged, Easy To Carry And Install And Use..
Features
- Effective Filtering: This receiver filter can effectively filter out of for band , noise and increase
- Easy To Use And Carry: This receiver bandpass filter is compact and standard, lightweight and rugged, easy to carry and install and use.
- Multi Functional: Integrating components, filters, radio frequency and coaxial, functions to meet your various needs
- Alloy Shell: This filter uses alloy shielding shell, anti interference, no out of for band spurious response, compact and sturdy, easy to use.
- Interference Reduction: The filter can effectively the interference of 1.2G map transmission to 2.4G and 5.8G devices such as 2.4G receivers and increase the distance.
- See more on Amazon...
Brand: ZIZEV | Manufacturer: ZIZEV
Dimensions: 0.39 x 2.36 x 1.57 inches
See On Amazon #9
Saw Bandpass Filter 480MHz Bandpass Filter,Saw Bandpass Filter 50Ohm Pass Filter PCB Low Insertion Loss Software Defined Radio Applications High Effective Saw Band Pass Receiver
Asin: B0CS6VJ1RC
High Definition Digital Image Transmission: This Filter Is Designed For Performance Optimization Of 480Mhz Channel Receiving Equipment Of For Cofdm High Definition Digital Image Transmission Equipment, Which Can Effectively Filter Out Out Of Band , Reduce Noise And Increase Communication Range..
Premium Material: This Filter Adopts Aluminum Alloy Shell, Anti Interference, No Out Of Band Stray Response, Compact, Sturdy And Easy To Use. The Receiver Band Pass Filter Has Small Size, Sturdy, Easy To Use And Convenient To Carry..
Information Of Product: The Impedance Of This Saw Filter Is 50 Ohms. The Center Frequency Is 480 Mhz..
Low Band Interpolation Loss: The Interface Of This Saw Filter Is Sma M, Sma F. This Filter Has Low Band Interpolation Loss And Steep Cut Off Characteristics. With Premium Anti Interference Performance, This Filter Can Be Easily Installed, Ideal Replacement For The Old And Damaged Parts..
Features
- EXCELLENT SUPPRESSION ABILITY: The internal of this filter is made of premium SAW filter chip and ultra thin PCB board, which has excellent suppression ability for out of band remote , and its performance is far better than that of products made of bare PCB board.
- LOW BAND INTERPOLATION LOSS: The interface of this SAW filter is SMA M, SMA F. This filter has low band interpolation loss and steep cut off characteristics. With premium anti interference performance, this filter can be easily installed, ideal replacement for the old and damaged parts.
- HIGH DEFINITION DIGITAL IMAGE TRANSMISSION: This filter is designed for performance optimization of 480MHz channel receiving equipment of for COFDM high definition digital image transmission equipment, which can effectively filter out out of band , reduce noise and increase communication range.
- INFORMATION OF PRODUCT: The impedance of this SAW filter is 50 Ohms. The center frequency is 480 MHz.
- PREMIUM MATERIAL: This filter adopts aluminum alloy shell, anti interference, no out of band stray response, compact, sturdy and easy to use. The receiver band pass filter has small size, sturdy, easy to use and convenient to carry.
- See more on Amazon...
Brand: Agatige | Manufacturer: Agatige
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.02 pounds
See On Amazon #10
SAW Interface Band-Pass Filter090MHz BPF Anti-Interference PCB Filter for Electronic Components
Asin: B0CNNWV7HH | Model: EILT261785 | PartNumber: EILT261785
High And Reliability: Crafted With And Using Premium Materials, This Band-Pass Filter-Lasting And Reliable Performance, Making It Suitable For A Wide Range Of Electronic Components And Applications..
Versatile Compatibility: Whether You're Working Radio Communication Systems, Transmitters, Or Electronic Devices Requiring090mhz Frequency Filtering, This Saw Interface Band-Pass Filter Is An Excellent Choice, Ensuring Optimal Functionality And Reducing Interference..
Easy Integration: With Its Compact And User-Friendly Design, This Bpf Anti-Interference Filter Is Simple To Integrate Into Your Electronic Circuit Boards, Saving You And Effort During Installation..
Saw Interface Technology: Designed With A Saw Interface, This Band-Pass Pcb Filter Ensures Optimal Filtering Of Signals Within The090mhz Frequency Range, Minimizing Unwanted Interference And Enhancing Overall Signal Quality..
Features
- Improved signal clarity: the performance of your electronic components with this090MHz Band Pass Filter, providing effective noise reduction and anti-interference capabilities.
- SAW Interface Technology: Designed with a SAW interface, this Band-Pass PCB Filter ensures optimal filtering of signals within the090MHz frequency range, minimizing unwanted interference and enhancing overall signal quality.
- High and reliability: Crafted with and using premium materials, this Band-Pass Filter-lasting and reliable performance, making it suitable for a wide range of electronic components and applications.
- Easy integration: With its compact and user-friendly design, this BPF Anti-Interference Filter is simple to integrate into your electronic circuit boards, saving you and effort during installation.
- Versatile compatibility: Whether you're working radio communication systems, transmitters, or electronic devices requiring090MHz frequency filtering, this SAW Interface Band-Pass Filter is an excellent choice, ensuring optimal functionality and reducing interference.
- See more on Amazon...
Brand: Ottjakin | Manufacturer: Ottjakin
Dimensions: 0.39 x 3.12 x 1.17 inches | Weight: 0.02 pounds
See On Amazon #11
Saw Bandpass Filter 403MHz Bandpass Filter,Saw Bandpass Filter 50Ohm Pass Filter PCB Low Insertion Loss Software Defined Radio Applications High Effective Saw Band Pass Receiver
Asin: B0CJVRWS69 | Model: Eujgoovcb2h3qkm1p | PartNumber: Eujgoovcb2h3qkm1p
Easy To Use And Carry:The Receiver Band Pass Filter Is Small In Size,Sturdy,Easy To Use And Convenient To Carry.
Application:This Filter Is Dedicated To 403Mhz Receiving Equipment To Optimize Its Performance,Effectively Filter Out Of Band ,Reduce Noise,And Increase Dynamic Range.
Excellent Performance:The Inside Of The Receiver Filter Is Ultra Thin Pcb Board,Has Excellent Suppression Ability For Out Of Band Remote ,And The Performance Is Far Superior To Products Made With Bare Pcb Boards. 1Db Passband:401-405Mhz. Insertion Loss:<2.5Db At 401-405Mhz.
Anti Interference Shell:The Saw Bandpass Filter Shell Is Anti Interference And Has No Out Of Band Spurious Response. Impedance:50Ohms.
Features
- Low in Band Insertion Loss:The bandpass filter has low in band insertion loss and steep cut off characteristics. Maximum Carrying Power:100mW (20dBm)
- Anti Interference Shell:The saw bandpass filter shell is anti interference and has no out of band spurious response. Impedance:50Ohms
- Easy to Use and Carry:The receiver band pass filter is small in size,sturdy,easy to use and convenient to carry
- Excellent Performance:The inside of the receiver filter is ultra thin PCB board,has excellent suppression ability for out of band remote ,and the performance is far superior to products made with bare PCB boards. 1dB Passband:401-405MHz. Insertion Loss:<2.5dB at 401-405MHz
- Application:This filter is dedicated to 403MHz receiving equipment to optimize its performance,effectively filter out of band ,reduce noise,and increase dynamic range
- See more on Amazon...
Brand: Eujgoov | Manufacturer: Eujgoov
See On Amazon #12
Bandpass Filter SMA Interface Saw Bandpass Filter1420MHz Saw Bandpass Filter 1420MHz/80MHz Anti Interference PCB 50 Ohms Band Pass Filter Receiver
Asin: B0CJQGQFG9 | Model: WALFRONTcmavsehy1i | PartNumber: WALFRONTcmavsehy1i
Excellent Performance: This Product Is Made Of Ultra Thin Pcb Board Inside, Which Still Has Excellent Inhibition Ability To The Remote Outside The Band, And Performance Is Far Better Than That Of The Products Made With Pcb Bare Board.
Technical Parameters: The Saw Filter Has A Bandwidth Of 80Mhz, Low Insertion Loss, Steep Cut Off Characteristic, Impedance Of 50Ohms.
Effective And Reliable: Used For Performance Optimization Of 1420Mhz Receiver, Which Can Effectively Filter Out Out Of Band , Reduce Noise And Increase Dynamic Range.
Strong Aluminum Alloy: Adopt Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use.
Features
- LOSS AND POWER: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), interface contain SMA M and SMA
- STRONG ALUMINUM ALLOY: Adopt aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use
- EXCELLENT PERFORMANCE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote outside the band, and performance is far better than that of the products made with PCB bare board
- EFFECTIVE AND RELIABLE: Used for performance optimization of 1420MHz receiver, which can effectively filter out out of band , reduce noise and increase dynamic range
- TECHNICAL PARAMETERS: The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic, impedance of 50Ohms
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #13
Saw Bandpass Filter Replacement, 1090MHz Bandpass Filter Aluminum Alloy Simple Installation 50Ohms Impedance Low Noise for DIY
Asin: B0CJCPG2T8 | Model: Honiokopu2cszx9 | PartNumber: Honiokopu2cszx9 | Ean: 7423419728205
Applicable Scenarios: Our Bandpass Filter Is Used For Performance Optimization Of Ads B Receivers At 1090Mhz. No Out Of Band Spurious Response..
Anti Interference: Our Band Pass Filter Is Anti Interference, Practical, Light In Overall Weight, Easy To Install And Friendly To Novices..
Aluminum Alloy Material: The Bandpass Filter Is Made Of Aluminum Alloy With Excellent Craftsmanship And Is Very Safe To Use..
Passband Bandwidth 30Mhz: This Filter Provides Guaranteed Passband Bandwidth Of 30Mhz With Low Insertion Loss And Steep Cutoff Characteristics..
Features
- Out of Band Filtering: The bandpass filter effectively filters out of band to reduce noise, increase dynamic range and improve stability.
- Passband Bandwidth 30MHz: This filter provides guaranteed passband bandwidth of 30MHz with low insertion loss and steep cutoff characteristics.
- Applicable Scenarios: Our bandpass filter is used for performance optimization of ADS B receivers at 1090MHz. No out of band spurious response.
- Aluminum Alloy Material: The bandpass filter is made of aluminum alloy with excellent craftsmanship and is very safe to use.
- Anti Interference: Our band pass filter is anti interference, practical, light in overall weight, easy to install and friendly to novices.
- See more on Amazon...
Brand: Honio | Manufacturer: Honio
See On Amazon #14
Saw Bandpass Filter 1420MHz Saw Bandpass Filter 1420MHz Saw Bandpass Filter Saw Bandpass Filter 80MHz Bandwidth SMA Interface for Radio Astronomy Electronic Component
Asin: B0CJ16XBG5 | Model: Eujgoovbhxsvoez9r | PartNumber: Eujgoovbhxsvoez9r
Effective And Reliable:Used For Performance Optimization Of 1420Mhz Receiver,Which Can Effectively Filter Out Out Of Band ,Reduce Noise And Increase Dynamic Range.
Strong Aluminum Alloy:Adopt Aluminum Alloy Shielding Shell,Interference Resistant,No Stray Response,Compact,Strong,Easy To Use.
Technical Parameters:The Saw Filter Has A Bandwidth Of 80Mhz,Low Insertion Loss,Steep Cut Off Characteristic,Impedance Of 50Ohms.
Loss And Power:Strip Insertion Loss Is Less Than 3.5Db,Maximum Load Power For 10Mw (10Dbm),Interface Contain Sma M And Sma F.
Features
- Excellent Performance:This product is made of ultra thin PCB board inside,which still has excellent inhibition ability to the remote outside the band,and performance is far better than that of the products made with PCB bare board
- Loss and Power:Strip insertion loss is less than 3.5dB,maximum load power for 10mW (10dBm),interface contain SMA M and SMA F
- Effective and Reliable:Used for performance optimization of 1420MHz receiver,which can effectively filter out out of band ,reduce noise and increase dynamic range
- Technical Parameters:The saw filter has a bandwidth of 80MHz,low insertion loss,steep cut off characteristic,impedance of 50Ohms
- Strong Aluminum Alloy:Adopt aluminum alloy shielding shell,interference resistant,no stray response,compact,strong,easy to use
- See more on Amazon...
Brand: Eujgoov | Manufacturer: Eujgoov
See On Amazon #15
Bandpass Filter, 403MHz 50Ohm Low Insertion Loss High Effective Saw Band Pass Receiver Filter
Asin: B0CD6653B4 | Model: Hyuduoc4a2t95ipy | PartNumber: Hyuduoc4a2t95ipy
[Excellent Performance]: The Ultra-Thin Pcb Board Inside The Receiver Filter Offers Superior Suppression Ability For Out-Of-Band Remote , Reducing Noise And Increasing Dynamic Range..
[Wide Application]: This Bandpass Filter Is Dedicated To Optimizing The Performance Of 403Mhz Receiving Equipment, Effectively Filtering Out-Of-Band And Improving Overall Quality..
[Anti Interference Shell]: Designed With An Anti-Interference Shell, This Saw Bandpass Filter Ensures No Out-Of-Band Spurious Response For Clear Reception..
[Easy To Use And Carry]: With A Small And Sturdy Size, This Receiver Band Pass Filter Is Convenient To Use And Carry, Perfect For On-The-Go Applications..
Features
- [LOW INSERTION LOSS]: The bandpass filter provides low in-band insertion loss and steep cutoff characteristics, optimizing the performance of 403MHz receiving equipment.
- [EASY TO USE AND CARRY]: With a small and sturdy size, this receiver band pass filter is convenient to use and carry, perfect for on-the-go applications.
- [EXCELLENT PERFORMANCE]: The ultra-thin PCB board inside the receiver filter offers superior suppression ability for out-of-band remote , reducing noise and increasing dynamic range.
- [ANTI INTERFERENCE SHELL]: Designed with an anti-interference shell, this SAW bandpass filter ensures no out-of-band spurious response for clear reception.
- [WIDE APPLICATION]: This bandpass filter is dedicated to optimizing the performance of 403MHz receiving equipment, effectively filtering out-of-band and improving overall quality.
- See more on Amazon...
Brand: Hyuduo | Manufacturer: Hyuduo
See On Amazon #16
UPQRSG 12Pcs Adhesive Clothing Patch, Sweater Shirt Elbow Knee Sleeve Wholesale Fourfoursquare Denim, Applique Patches for Jeans Clothing Repair Elbow Pants Knees
Asin: B0CD2DJG6C
Excellent Performance: This Product Is Made Of Ultra Thin Pcb Board Inside, Which Still Has Excellent Inhibition Ability To The Remote Waft Outside The Band, And Performance Is Far Better Than That Of The Products Made With Pcb Bare Board..
Loss And Power: Strip Insertion Loss Is Less Than 3.5Db, Maximum Load Power For 10Mw (10Dbm), Interface Contain Sma M And Sma F..
Strong Aluminum Alloy: Adopt Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use..
Effective And Reliable: Used For Performance Optimization Of 1420Mhz Receiver, Which Can Effectively Filter Out Out Of Band Wafts, Reduce Noise And Increase Dynamic Range..
Features
- TECHNICAL PARAMETERS: The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic, impedance of 50Ohms.
- EFFECTIVE AND RELIABLE: Used for performance optimization of 1420MHz receiver, which can effectively filter out out of band wafts, reduce noise and increase dynamic range.
- EXCELLENT PERFORMANCE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote waft outside the band, and performance is far better than that of the products made with PCB bare board.
- STRONG ALUMINUM ALLOY: Adopt aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use.
- LOSS AND POWER: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), interface contain SMA M and SMA F.
- See more on Amazon...
Brand: UPQRSG | Manufacturer: UPQRSG
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.11 pounds
See On Amazon #17
BAAROO Saw Bandpass Filter 1420MHz Bandpass Filter Module 80MHz Bandwidth 50 Ohms Band Pass Filter for Radio Astronomy Electronic Component
Asin: B0C1J3YWYM | Ean: 9828697062245
Effective And Reliable: Used For Performance Optimization Of 1420Mhz Receiver, Which Can Effectively Filter Out Out Of Band Signals, Reduce Noise And Increase Dynamic Range.
Technical Parameters: The Saw Filter Has A Bandwidth Of 80Mhz, Low Insertion Loss, Steep Cut Off Characteristic, Impedance Of 50Ohmswelcome To Consult.
Loss And Power: Strip Insertion Loss Is Less Than 3.5Db, Maximum Load Power For 10Mw (10Dbm), Interface Contain Sma M And Sma F.
Strong Aluminum Alloy: Adopt Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use.
Features
- EXCELLENT PERFORMANCE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote signal outside the band, and performance is far better than that of the products made with PCB bare board
- STRONG ALUMINUM ALLOY: Adopt aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use
- EFFECTIVE AND RELIABLE: Used for performance optimization of 1420MHz receiver, which can effectively filter out out of band signals, reduce noise and increase dynamic range
- LOSS AND POWER: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), interface contain SMA M and SMA F
- TECHNICAL PARAMETERS: The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic, impedance of 50OhmsWelcome to consult
- See more on Amazon...
Brand: BAAROO | Manufacturer: BAAROO
Weight: 0.00 pounds
See On Amazon #18
FOLOSAFENAR Bandpass Filter Module, Saw Bandpass Filter Increase Dynamic Range Low Insertion Loss 80MHz Bandwidth with SMA Interface for Radio Astronomy
Asin: B0BXFQ2357
Excellent Performance: This Product Is Made Of Ultra Thin Pcb Board Inside, Which Still Has Excellent Inhibition Ability To The Remote Signal Outside The Band, And Performance Is Far Better Than That Of The Products Made With Pcb Bare Board.
Loss And Power: Strip Insertion Loss Is Less Than 3.5Db, Maximum Load Power For 10Mw (10Dbm), Interface Contain Sma M And Sma F.
Strong Aluminum Alloy: Adopt Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use.
Effective And Reliable: Used For Performance Optimization Of 1420Mhz Receiver, Which Can Effectively Filter Out Out Of Band Signals, Reduce Noise And Increase Dynamic Range.
Features
- TECHNICAL PARAMETERS: The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic, impedance of 50Ohms
- EFFECTIVE AND RELIABLE: Used for performance optimization of 1420MHz receiver, which can effectively filter out out of band signals, reduce noise and increase dynamic range
- EXCELLENT PERFORMANCE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote signal outside the band, and performance is far better than that of the products made with PCB bare board
- STRONG ALUMINUM ALLOY: Adopt aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use
- LOSS AND POWER: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), interface contain SMA M and SMA F
- See more on Amazon...
Brand: FOLOSAFENAR | Manufacturer: FOLOSAFENAR
See On Amazon #19
Saw Bandpass Filter, Ultra Thin PCB Board Bandpass Filter Module for Radio Astronomy
Asin: B0BSDQMQ66
Excellent Performance: This Product Is Made Of Ultra Thin Pcb Board Inside, Which Still Has Excellent Inhibition Ability To The Remote Signal Outside The Band, And Performance Is Far Better Than That Of The Products Made With Pcb Bare Board.
Loss And Power: Strip Insertion Loss Is Less Than 3.5Db, Maximum Load Power For 10Mw (10Dbm), Interface Contain Sma M And Sma F.
Strong Aluminum Alloy: Adopt Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use.
Effective And Reliable: Used For Performance Optimization Of 1420Mhz Receiver, Which Can Effectively Filter Out Out Of Band Signals, Reduce Noise And Increase Dynamic Range.
Features
- TECHNICAL PARAMETERS: The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic, impedance of 50Ohms
- EFFECTIVE AND RELIABLE: Used for performance optimization of 1420MHz receiver, which can effectively filter out out of band signals, reduce noise and increase dynamic range
- EXCELLENT PERFORMANCE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote signal outside the band, and performance is far better than that of the products made with PCB bare board
- STRONG ALUMINUM ALLOY: Adopt aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use
- LOSS AND POWER: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), interface contain SMA M and SMA F
- See more on Amazon...
Brand: Tgoon | Manufacturer: Tgoon
See On Amazon #20
Saw Bandpass Filter, Effective Bandpass Filter 1420MHz Ultra Thin PCB Board with SMA Interface for Radio Astronomy
Asin: B0BS1P9YL1 | Model: Naroote5ykvfs70xm | PartNumber: Naroote5ykvfs70xm
Effective And Reliable: Used For Performance Optimization Of 1420Mhz Receiver, Which Can Effectively Filter Out Out Of Band , Reduce Noise And Increase Dynamic Range.
Excellent Performance: This Product Is Made Of Ultra Thin Pcb Board Inside, Which Still Has Excellent Inhibition Ability To The Remote Signal Outside The Band, And Performance Is Far Better Than That Of The Products Made With Pcb Bare Board.
Loss And Power: Strip Insertion Loss Is Less Than 3.5Db, Maximum Load Power For 10Mw (10Dbm), Interface Contain Sma M And Sma F.
Strong Aluminum Alloy: Adopt Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use.
Features
- TECHNICAL PARAMETERS: The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic, impedance of 50Ohms
- STRONG ALUMINUM ALLOY: Adopt aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use
- EFFECTIVE AND RELIABLE: Used for performance optimization of 1420MHz receiver, which can effectively filter out out of band , reduce noise and increase dynamic range
- LOSS AND POWER: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), interface contain SMA M and SMA F
- EXCELLENT PERFORMANCE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote signal outside the band, and performance is far better than that of the products made with PCB bare board
- See more on Amazon...
Brand: Naroote | Manufacturer: Naroote
See On Amazon
Looking For Something Else?
Search