SAW Band Pass Filter, Low Insertion Loss Aluminum Alloy Housing Band Pass Filter 1420MHz with SMA Interface for Radio Astronomy
Asin: B0BR5CK6L9 | Model: Narootexdbv8kg4gi | PartNumber: Narootexdbv8kg4gi
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Strong Aluminum Alloy: Adopt Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use.
Technical Parameters: The Saw Filter Has A Bandwidth Of 80Mhz, Low Insertion Loss, Steep Cut Off Characteristic, Impedance Of 50Ohms.
Loss And Power: Strip Insertion Loss Is Less Than 3.5Db, Maximum Load Power For 10Mw (10Dbm), Interface Contain Sma M And Sma F.
Effective And Reliable: Used For Performance Optimization Of 1420Mhz Receiver, Which Can Effectively Filter Out Out Of Band Signals, Reduce Noise And Increase Dynamic Range.
Features
- EXCELLENT PERFORMANCE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote signal outside the band, and performance is far better than that of the products made with PCB bare board
- EFFECTIVE AND RELIABLE: Used for performance optimization of 1420MHz receiver, which can effectively filter out out of band signals, reduce noise and increase dynamic range
- STRONG ALUMINUM ALLOY: Adopt aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use
- LOSS AND POWER: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), interface contain SMA M and SMA F
- TECHNICAL PARAMETERS: The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic, impedance of 50Ohms
- See more on Amazon...
Brand: Naroote | Manufacturer: Naroote
See On Amazon Similar To SAW Band Pass Filter Low
#1
Table Inserts (Pack of 2) for 14" Band saws or Scroll saws Diameter: 2.5 in, Thickness: 0.1 in.Please Confirm That The Size You Want to Buy is consistent with This Product
Asin: B07PVZCM78 | Ean: 6443275575363
Use On 14" Band Saws And 24" Scroll Saws.2&1/2" X .100 Thick Please Measure Your Saws Recess To Ensure Proper Fit.
Important Installation Note:I Have Sold Several Hundred Of These And Occasionally Someone Will Have The Problem Of It Being A Bit Too Large. First Make Sure The Lip Of The Hole Is Free From Dirt. If A Table Alignment Pin,Is Not Tight Or Missing,Often The Blade Mounting Slot Will Close Up Some Over Time Which Reduces The Insert Hole Diameter Slightly. I Tap A Flat Head Screw Driver Into The Blade Installation Slot A Bit To Wedge It Open. That Should Spread The Insert Hole Enough For It To Fit.
They Fit Delta, Rockwell, Some Jet, Ridgid, Grizzly, And Other Imports..
Make Sure Your Insert Recess Has The Locating Pin On The Side, Not On The Rear..
Features
- Please measure your saw as some Delta & Rockwell &Grizzly14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don't buy it.
- Make sure your insert recess has the locating pin on the side, not on the rear.
- use on 14 Band Saws and 24 Scroll Saws.2&1/2 X .100 thick Please measure your saws recess to ensure proper fit
- They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
- IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
- See more on Amazon...
Brand: palart | Manufacturer: KINNG
Dimensions: 0.04 x 2.50 x 2.50 inches
See On Amazon #2
Table Inserts (Pack of 3) for 14" Band saws or Scroll saws,Diameter: 2.5 in, Thickness: 0.1 in.(Please make sure this is your size)
Asin: B07JPD8NW5 | Ean: 6421291831953
2&1/2" X .100 Thick Please Measure Your Saws Recess To Ensure Proper Fit They Fit Delta, Rockwell, Some Jet, Ridgid, Grizzly, And Other Imports..
Important Installation Note:I Have Sold Several Hundred Of These And Occasionally Someone Will Have The Problem Of It Being A Bit Too Large. First Make Sure The Lip Of The Hole Is Free From Dirt. If A Table Alignment Pin,Is Not Tight Or Missing,Often The Blade Mounting Slot Will Close Up Some Over Time Which Reduces The Insert Hole Diameter Slightly. I Tap A Flat Head Screw Driver Into The Blade Installation Slot A Bit To Wedge It Open. That Should Spread The Insert Hole Enough For It To Fit.
Make Sure Your Insert Recess Has The Locating Pin On The Side, Not On The Rear.
Use On 14" Band Saws And 24" Scroll Saws..
Features
- Three inserts to protect your expensive blades Please measure your saw as some Delta & Rockwell &Grizzly14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don't buy it.
- use on 14 Band Saws and 24 Scroll Saws.
- 2&1/2 X .100 thick Please measure your saws recess to ensure proper fit They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
- Make sure your insert recess has the locating pin on the side, not on the rear
- IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
- See more on Amazon...
Brand: palart | Manufacturer: KINNG
See On Amazon #3
Garosa Frequency Test Board Demo Kit VNA Test Module Vector Network Analyzer Breadboard Test Protoboard Board Filter/Attenuator Module
Asin: B081YN3DWK | Model: Garosa812quomibr | PartNumber: Garosa812quomibr | Ean: 0738585633237 | UPC: 738585633237
【Safe And Reliable】--Each Module Is Well Selected Of High Quality And Great Reliability,Practical, Has A Long Service Life..
【Remind】Please Note That This Product Only Contains 2 Ufl Patch Cords. If You Need To Change The Connection Multiple Times, It May Cause Inconvenience. Please Purchase With Caution, Or Purchase A Ufl Patch Cord For Replacement..
【Easy To Carry】--The Board Is Small And Light ,Suitable For Carrying With.Easy To Operate And Use..
【18 Functional Modules】--The Board Is Totally Integrated With 18 Functional Modules.Can Be Used To Measure 30Mhz Short Wave Low-Pass-Filter Lpf,100Mhz Fm High-Pass Filter Hpf,433Mhz Commonly Used Saw Band Pass Filter Bpf,6.5Mhz Ceramic Trap Bsf..
Features
- Specialty --Demo Kit VNA test board demo calibration board for learning Vector Network Analyzer , Antenna Analyzer test calibration learning.
- 18 functional modules --The board is totally integrated with 18 functional modules.Can be used to measure 30MHz short wave low-pass-filter LPF,100MHz FM high-pass filter HPF,433MHz commonly used SAW band pass filter BPF,6.5MHz ceramic trap BSF.
- Safe and reliable --Each module is well selected of high quality and great reliability,practical, has a long service life.
- Easy to carry --The board is small and light ,suitable for carrying with.Easy to operate and use.
- Remind Please note that this product only contains 2 UFL Patch Cords. If you need to change the connection multiple times, it may cause inconvenience. Please purchase with caution, or purchase a ufl patch cord for replacement.
- See more on Amazon...
Brand: Garosa | Manufacturer: Garosa
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.09 pounds
See On Amazon #4
Readytosky M8N GPS Module Built-in Compass with GPS Antenna Mount for Standard Pixhawk 2.4.6 2.4.8 APM 2.6 2.8 Flight Controller
Asin: B01KK9A8QG | Model: XGT60-BLACK | PartNumber: XGT60-BLACK | Ean: 0757450335106 | UPC: 757450335106
★A New Generation M8n Gps,With Low Power Consumption And High Precision..
★★★ Attention: The Gps Can Only Use In Pixhawk And Apm Flight Controller,It Can't Work With Other Flight Controller..
★The Gps Light Only Can Light Up When It Search The Satellite Signal Outdoor; Rom Already Been Fix,It Cannot Be Flash And Change..
★The Ultimate Accuracy Is 0.6 Meters, Actually Almost 0.9 Meters, Greater Than The Previous Generation Neo-7N 1.4-1.6 Meters Accuracy..
Features
- Special designed for Pixhawk 2.4.6 2.4.8 flight controller,ASIN:B07CHQ7SZ4.(Note:If you use it to APM Flight Controller, Please replace the connect by yourself.)
- The ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy.
- A new generation M8N GPS,with low power consumption and high precision.
- The GPS light only can light up when it search the satellite signal outdoor; ROM already been fix,it cannot be flash and change.
- Attention: the GPS can only use in Pixhawk and APM Flight controller,it can't work with other flight controller.
- See more on Amazon...
Brand: Readytosky | Manufacturer: Readytosky
Dimensions: 0.79 x 8.27 x 5.91 inches | Weight: 0.12 pounds
See On Amazon #5
Bandpass Filter, Band Pass Filter Bandpass SMA Filter Bandpass Filter BPF New Denoise 2.45G 433M 1575M 900M 1090M Reduction Filtering Saw Filter Band Pass Filter
Asin: B092MHSRZP | Ean: 9032654085431
【High Quality】The Band-Pass Filter Is Crafted From Materials, Ensuring High Precision And Stable Performance. Its Durability Ensures Long-Term Reliability, Even Under Heavy Use. The Filter's High Sensitivity Ensures Accurate Signal Transmission, Making It Suitable For Applications That Require Precise Frequency Control..
【Brand New】This Bandpass Filter Is New And Of The Quality. It Undergoes Strict Testing Before Shipment To Ensure The Best Quality . You Can Rest Assured That This Filter Will Meet Your Expectations And Provide Reliable Performance For Your Application..
【Features】The 433Mhz Band Pass Filter Undergoes Professional Manufacturing Processes, Resulting In A Precise Design And High Reliability. Its Stable And Reliable Working Performance Ensures Consistent Results, Even In Challenging Environments..
【Professional Design】Professionally Designed, This Filter Boasts Low Insertion Loss, Ensuring Minimal Signal Attenuation. Its High Stopband Rejection And Image Attenuation Capabilities Effectively Eliminate Unwanted Frequencies. Additionally, Its High Power Tolerance Allows It To Handle Even The Most Demanding Signal Loads..
Features
- Easy to Debug The bandpass filter is a precision device that permits only a specific frequency band to pass through while effectively blocking all other frequencies. Its design ensures ease of debugging, allowing users to quickly identify and resolve any issues that may arise during installation or operation.
- Professional Design Professionally designed, this filter boasts low insertion loss, ensuring minimal signal attenuation. Its high stopband rejection and image attenuation capabilities effectively eliminate unwanted frequencies. Additionally, its high power tolerance allows it to handle even the most demanding signal loads.
- High Quality The band-pass filter is crafted from materials, ensuring high precision and stable performance. Its durability ensures long-term reliability, even under heavy use. The filter's high sensitivity ensures accurate signal transmission, making it suitable for applications that require precise frequency control.
- Features The 433MHz band pass filter undergoes professional manufacturing processes, resulting in a precise design and high reliability. Its stable and reliable working performance ensures consistent results, even in challenging environments.
- Brand New This bandpass filter is new and of the quality. It undergoes strict testing before shipment to ensure the best quality . You can rest assured that this filter will meet your expectations and provide reliable performance for your application.
- See more on Amazon...
Brand: Kuuleyn | Manufacturer: Kuuleyn
Dimensions: 0.39 x 2.36 x 1.18 Inches | Weight: 0.01 pounds
See On Amazon #6
Roland SYSTEM-8 PLUG-OUT Synthesizer, 49-key
Asin: B01LW9KEE8 | Model: SYSTEM-8 | PartNumber: SYSTEM-8 | Ean: 0761294508749 | UPC: 761294508749
Hosts Up To Three Plug-Out Synths; Jupiter-8 And Junior-106 Plug-Outs Included.
Usb Audio/Midi Interface And Control Surface Mode.
Arpeggiator, Vocoder, And Polyphonic Chord Memory Functions.
Cv/Gate Outputs For Interfacing With Modular Synths And Vintage Gear.
Massive Real-Time Control With Dedicated Knobs, Sliders, And Buttons.
Polyphonic Step Sequencer With Classic Trs-Rec Style Interface.
Advanced Low-Pass, High-Pass, And Side-Band Filters With High-Resolution Controls.
Large Selection Of Onboard Effects With Hands-On Controls.
Internal Sound Engine Delivers Classic Analog Tones And Dynamic Modern Sounds With Analog Vibe.
Features
- Versatile performance synthesizer with advanced acb technology and 49 full-size keys
- Internal sound engine delivers classic analog tones and dynamic modern sounds with analog Vibe
- Hosts up to three plug-out synths; Jupiter-8 and junior-106 plug-outs included
- Advanced low-pass, high-pass, and side-band filters with high-resolution controls
- Massive real-time control with dedicated knobs, sliders, and buttons
- Polyphonic step sequencer with classic trs-rec style interface
- Arpeggiator, vocoder, and polyphonic chord memory functions
- Cv/Gate outputs for interfacing with modular synths and vintage gear
- Large selection of Onboard effects with hands-on controls
- Usb Audio/MIDI interface and control surface Mode
- See more on Amazon...
Brand: Roland | Manufacturer: Roland
Dimensions: 4.30 x 35.00 x 14.30 inches | Weight: 13.00 pounds
Warranty: N/a.
See On Amazon #7
SMA Interface Bandpass Filter, 915MHz Receiver Filter 26MHz Bandwidth 902 928MHz PCB 50 Ohms Band Pass Filter for RFID Remote Control
Asin: B0BK2K74V3 | Model: Yoidesufxgv309yo85663 | PartNumber: Yoidesufxgv309yo85663
Excellent Effetcs: Sma Interface Bandpass Filter Can Effectively Filter Out Of Band Signals, Reduce Noise, And Increase Dynamic Range..
Metal Material: Bandpass Filter Is Made Of Premium Metal Material, , And Long Service Life..
Gold Plated Structure: Saw Bandpass Filter Adopts 24K Gold Plated Structure, The Performance Index Is Much Better Than Other Products Processed By Pcb Bare Board..
Applicable: Rfid Remote Control Saw Bandpass Filter For 915 Mhz Rfid Receivers With Optimized Performance..
Features
- Professional Design: Bandpass filter with 1dB bandwidth of 26MHz, steep cutoff characteristics, center frequency: 915MHz, 1dB passband: 902 928 MHz.
- Applicable: RFID Remote control saw bandpass filter for 915 MHz RFID receivers with optimized performance.
- Excellent Effetcs: SMA interface bandpass filter can effectively filter out of band signals, reduce noise, and increase dynamic range.
- Gold Plated Structure: SAW bandpass filter adopts 24K gold plated structure, the performance index is much better than other products processed by PCB bare board.
- Metal Material: Bandpass filter is made of premium metal material, , and long service life.
- See more on Amazon...
Brand: Yoidesu | Manufacturer: Yoidesu
See On Amazon #8
DIYmall Micro GPSV5 GPS Module GNSS HMC5983/IST8310 Saw LNA Triple Band Antenna ANT for Arduino Raspberry Pi Pixhawk
Asin: B012RNLG0K | Model: FZ1474 | PartNumber: FZ1474 | Ean: 7739988582095
Triple Band Gps, Glonass And Beidou Antenna.
What You Will Get: 1Pcs Gpsv5 Gps Module ,1Pcs Antenna, 1Pcs Cable.
1 Ttl Uart Port, 1 I2c Port, Build-In Hmc5983/Ist8310 Compass.
On-Board Ultra Low Noise 3.3V Voltage Regulator And Rf Filter For Noise Blocking.
Features
- VCC to 3.3V or 5V, voltage is 3V-5V
- On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking
- Triple band GPS, Glonass and BeiDou antenna
- 1 TTL UART port, 1 I2C port, Build-in HMC5983/IST8310 Compass
- What you will get: 1pcs GPSV5 GPS module ,1pcs antenna, 1pcs cable
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
Dimensions: 0.98 x 1.18 x 0.39 Inches
See On Amazon #9
FPVDrone M8N GPS Module Built-in Compass with GPS Antenna Mount for APM 2.6 APM 2.8 Pixhawk Flight Controller
Asin: B06XR6JHDW | Ean: 0757450335564 | UPC: 757450335564
★The M8n And Ceramic Antenna Make This A Very Accurate Receiver,Fast Locks & Lots Of Satellites..
★★★Note:When Use 2.8 Boards With Our Gps Module Must Remove The Jumper,If You Need To Calibrate,Make The Control And Gps Compass Direction Same And Keep The Two Position Fixed(Cannot Make Any Move,Must Fix Them On Quadcopter And Then Calibrate,Or It Will Be Failed.).
★★★Note:It Is Default For Apm Flight Controller,If You Use With Pixhawk Flight Controller,You Need To Change The Connector By Yourself..
★A New Generation M8n Gps Module,With Low Power Consumption And High Precision..
Features
- M8N GPS Module for APM2.6 APM2.8 Flight Controller.
- A new generation M8N GPS Module,with low power consumption and high precision.
- The M8N and ceramic antenna make this a very accurate receiver,fast locks & lots of satellites.
- Note:it is default for APM flight controller,if you use with Pixhawk flight controller,you need to change the connector by yourself.
- Note:When use 2.8 boards with our GPS module must remove the jumper,if you need to calibrate,make the control and GPS compass direction same and keep the two position fixed(cannot make any move,must fix them on quadcopter and then calibrate,or it will be failed.)
- See more on Amazon...
Brand: FPVDrone | Manufacturer: LongJinSheng
Dimensions: 0.20 x 4.80 x 4.09 inches | Weight: 0.20 Pounds
See On Amazon #10
Bandpass Filter, Antiinterference Bandpass Filter, Installation for System Receiver
Asin: B0C6PD5PYP | Model: CUIFATIfokeuicnzt | PartNumber: CUIFATIfokeuicnzt
Made Of Aluminum Alloy Material, Light Weight, Oxidation Resistance, Resistance..
With High Reliability, Stable And Reliable Working Performance, Sma Interface, Easy To Use..
Wide Compatibility, Can Be Used For Receivers, As Well As , Bt, Systems,Anti Interference..
Increase Service Life, One Piece Molding, No Burrs, Smoother , Smoother Installation..
Features
- Easy to debug, good selectivity, good stability, center frequency 1.575GHZ, used for GPS positioning.
- Increase service life, one piece molding, no burrs, smoother , smoother installation.
- Made of aluminum alloy material, light weight, oxidation resistance, resistance.
- Wide compatibility, can be used for receivers, as well as , BT, systems,anti interference.
- With high reliability, stable and reliable working performance, SMA interface, easy to use.
- See more on Amazon...
Brand: Cuifati | Manufacturer: CUIFATI
See On Amazon #11
1090MHz Band Pass Filter, Saw Band Pass Filter 1 PCS 1090MHz ADS-B Aeronautical Bandwidth 14MHz SMA Interface Band-Pass Filter
Asin: B07BHM4PKT | Ean: 0654936213227 | UPC: 654936213227
Strength:Many Audio Device Of Spectrum Analyzer Are Using This Circuit As A Band-Pass Filter, To Choose Different Frequency Band , By The Number Of Leds Light Up On The Display Indicates That The Amplitude Of The.
High Reliability:High Reliability, Stable And Reliable Performance In Full Temperature Range.
Good Frequency Filtering Effect:In The Circuit And Electronic High Frequency System, There Is A Good Frequency Filtering Effect, And Can Suppress The And Noise Outside The Band.
High Quality:It Is Made Of High Quality Metal, With Sturdy Structure.
Features
- BAND-PASS FILTER:A band-pass filter is a device that allows a particular frequency band to block other frequencies simultaneously
- HIGH QUALITY:It is made of high quality metal, with sturdy structure
- STRENGTH:Many audio device of spectrum analyzer are using this circuit as a band-pass filter, to choose different frequency band , by the number of leds light up on the display indicates that the amplitude of the
- GOOD FREQUENCY FILTERING EFFECT:In the circuit and electronic high frequency system, there is a good frequency filtering effect, and can suppress the and noise outside the band
- HIGH RELIABILITY:High reliability, stable and reliable performance in full temperature range
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #12
SAW Bandpass Filter 868MHz SAW Bandpass Filter Aluminum Alloy Shell Bandwidth SMA Interface for Receiver 4MHz Bandwidth
Asin: B0BNNVMYL6 | Model: Eujgoovw8ie57a3xm | PartNumber: Eujgoovw8ie57a3xm
Low Loss: This Bandpass Filter Has A 1Db Bandwidth Of 4Mhz And Steep Cut Off Characteristics, With The Passband Of 866 To 870Mhz, Has Low Insertion Loss..
Improve Performance: This Band Pass Filter Can Effectively Filter Out Out Of Band , Reduce Noise And Increase Dynamic Range, Improves The Performance Of Receivers..
Aluminum Alloy Shell: The Shell Adopts Premium Aluminum Alloy Materials, Which Is Anti Interference, Has No Out Of Band Stray Response..
For 868Mhz Devices: This Filter Is Designed For Performance Optimization For Receiver And For Lora Iot Node Equipments With The Frequency Of 868Mhz..
Features
- Easy to Carry and Use: Aluminum alloy shell is light weight and high in strength, the bandpass filter is compact in size, easy to carry, with SMA M SMA F interface, simple to use.
- For 868MHz Devices: This filter is designed for performance optimization for receiver and for LoRa IoT node equipments with the frequency of 868MHz.
- Low Loss: This bandpass filter has a 1dB bandwidth of 4MHz and steep cut off characteristics, with the passband of 866 to 870Mhz, has low insertion loss.
- Aluminum Alloy Shell: The shell adopts premium aluminum alloy materials, which is anti interference, has no out of band stray response.
- Improve Performance: This band pass filter can effectively filter out out of band , reduce noise and increase dynamic range, improves the performance of receivers.
- See more on Amazon...
Brand: Eujgoov | Manufacturer: Eujgoov
See On Amazon #13
Saw Bandpass Filter Receiver Filter 915MHz SMA Interface High Effective Bandpass Receiver Filter Electronic Component
Asin: B0B1P676M6
Applicable Model: The Center Frequency Of This Broadcast Filter Module Is 915Mhz, Suitable For All 915Mhz Miners And Antennas..
Wide Compatibility: This Radio Filter Is Designed For Long Range Radio Internet Of Things Applications, Compatible With All Helium Miners On The Market, Such As For Nebra Hnt Indoor And Outdoor Hotspot Miner, For Rak V2 Hotspot Miner, Etc..
Features: This Rf Bandpass Filter Has Stable Structure, Excellent Performance, Small Size, Light Weight And Long Service Life..
Main Purpose: This Sma Interface Bandpass Filter Can Effectively Filter Out Out Of Band , Which Can Reduce Noise, And Increase Dynamic Range..
Features
- 26MHz BANDWIDTH: The bandwidth of the receiver filter is 26MHz, which matches the antenna frequency to that of the device and provides identification capabilities.
- MAIN PURPOSE: This SMA interface bandpass filter can effectively filter out out of band , which can reduce noise, and increase dynamic range.
- APPLICABLE MODEL: The center frequency of this broadcast filter module is 915MHz, suitable for all 915mhz miners and antennas.
- FEATURES: This RF bandpass filter has stable structure, excellent performance, small size, light weight and long service life.
- WIDE COMPATIBILITY: This radio filter is designed for long range radio internet of things applications, compatible with all helium miners on the market, such as for Nebra HNT indoor and outdoor hotspot miner, for RAK V2 hotspot miner, etc.
- See more on Amazon...
Brand: LiebeWH | Manufacturer: LiebeWH
See On Amazon #14
Pomya Bandpass Filter, Professional 881 MHz GSM900 Special Saw Bandpass Filter, 27MHz Bandwidth High Pass Filter with SMA Interface for Signal Testing
Asin: B0BKLSYN6H
24K Gold Plated Structure: Bandpass Filter Adopts 24K Gold Plated Structure, The Performance Index Is Far Better Than Other Products Processed With Bare Pcb..
Premium Material: Saw Interface Bandpass Filter Is Made Of Premium Metal Material, Strong And , Long Service Life..
Improve Signal To Noise Ratio: Connecting This Saw Bandpass Filter Can Reduce Electromagnetic Interference From The Environment, Which Will Greatly Improve The Signal To Noise Ratio..
Superior Performance: Saw Bandpass Filter, Which Can Effectively Filter Out Of Band Signals, Reduce Noise And Increase Dynamic Range..
Features
- Professional Bandpass Filter: 1dB bandwidth of 27MHz with steep cutoff characteristics. For GSM900 and CDMA signal testing in the 868 895MHz frequency range.
- Superior Performance: Saw bandpass filter, which can effectively filter out of band signals, reduce noise and increase dynamic range.
- 24K Gold Plated Structure: Bandpass filter adopts 24K gold plated structure, the performance index is far better than other products processed with bare PCB.
- Improve Signal to Noise Ratio: Connecting this saw bandpass filter can reduce electromagnetic interference from the environment, which will greatly improve the signal to noise ratio.
- Premium Material: Saw Interface bandpass filter is made of premium metal material, strong and , long service life.
- See more on Amazon...
Brand: Pomya | Manufacturer: Pomya
See On Amazon #15
1090 MHz Bandpass Filter, 50 Ohms Impedance Saw Safe Bandpass Filter Replacement Cutoff Features for Maintenance
Asin: B0BQWQ6169 | Model: RTLRp7v92qgkwc | PartNumber: RTLRp7v92qgkwc | Ean: 7424226829512
【Passband Bandwidth 30Mhz】--- This Filter Provides Guaranteed Passband Bandwidth Of 30Mhz With Low Insertion Loss And Steep Cutoff Characteristics..
【Applicable Scenarios】--- Our Bandpass Filter Is Used For Performance Optimization Of Ads B Receivers At 1090Mhz. No Out Of Band Spurious Response..
【Out Of Band Signal Filtering】--- The Bandpass Filter Effectively Filters Out Of Band Signals To Reduce Noise, Increase Dynamic Range And Improve Stability..
【Anti Interference】--- Our Band Pass Filter Is Anti Interference, Practical, Light In Overall Weight, Easy To Install And Friendly To Novices..
Features
- Aluminum Alloy Material --- The bandpass filter is made of aluminum alloy with excellent craftsmanship and is very safe to use.
- Anti Interference --- Our band pass filter is anti interference, practical, light in overall weight, easy to install and friendly to novices.
- Passband Bandwidth 30MHz --- This filter provides guaranteed passband bandwidth of 30MHz with low insertion loss and steep cutoff characteristics.
- Out of Band Signal Filtering --- The bandpass filter effectively filters out of band signals to reduce noise, increase dynamic range and improve stability.
- Applicable Scenarios --- Our bandpass filter is used for performance optimization of ADS B receivers at 1090MHz. No out of band spurious response.
- See more on Amazon...
Brand: RTLR | Manufacturer: RTLR
See On Amazon #16
Kadimendium 144MHz 2 Meter Bandpass Filter Aluminum Alloy Band Pass Filter Saw Band Pass Receiver Splitter Filter Saw Bandpass Filter with SMA Interface 50ohms
Asin: B0B6V8DMDG | Ean: 7907912983656
Good Compatibility: This Aluminum Alloy Bandpass Filter Is Designed For Lora Iot Application, Compatible With Most Helium Miners On The Market, For Nebra Hnt Hotspot Miner, For Rak V2 Hotspot Miner, Etc..
Aluminum Alloy: The Bandpass Filter Is Made Of Aluminum Alloy Material, Lightweight, Not Easy To Deform Or Wear For Long Term Use..
Bandwidth Range: The Filter Has Sma Interface, 3Db Bandwidth Is 127~157Mhz, 30Db Bandwidth Is 105~200Mhz, With Low Loss And Large Carrying Power..
144Mhz Frequency: Our Bandpass Filter Is Suitable For All 144Mhz Miners And Antennas, Low Pass Filter With Stable Structure, Excellent Performance And Long Service Life..
Features
- BANDPASS FILTER: 144MHz 2 meter band bandpass filter with compact structure, which has excellent selectivity and high out of band rejection.
- 144MHZ FREQUENCY: Our bandpass filter is suitable for all 144MHz miners and antennas, low pass filter with stable structure, excellent performance and long service life.
- GOOD COMPATIBILITY: This aluminum alloy bandpass filter is designed for LoRa IoT application, compatible with most helium miners on the market, for Nebra HNT hotspot miner, for RAK V2 hotspot miner, etc.
- BANDWIDTH RANGE: The filter has SMA interface, 3dB bandwidth is 127~157MHz, 30dB bandwidth is 105~200MHz, with low loss and large carrying power.
- ALUMINUM ALLOY: The bandpass filter is made of aluminum alloy material, lightweight, not easy to deform or wear for long term use.
- See more on Amazon...
Brand: Kadimendium | Manufacturer: Kadimendium
See On Amazon #17
AURSINC NanoVNA-H Vector Network Analyzer 2.8'' Touchscreen with case + Filter Attenuator RF Demo Kit NanoVNA RF Tester Board
Asin: B09C5XXWG2
[Nanovna-H] Designed A Practical And Simple Control Application On Pc, You Can Download Touchstone(Snp) Files For Radio Design And Simulation Software. There Is A Pc Interface That Adds Functionality And Lets You Work Interactively On A Bigger Screen. Supports Time Domain Analysis Function (Tdr). Compatible With Most Android Mobile Phones, Convenient For Connecting To Mobile Phones. Support Windows Computer Control.
[Filter Attenuator Rf Demo Kit] Tiny But Mighty: 18 Functional Modules; The Board Is Totally Integrated With 18 Functional Modules.Can Be Used To Measure 30Mhz Short Wave Low-Pass-Filter Lpf, 100Mhz Fm High-Pass Filter Hpf, 433Mhz Commonly Used Saw Band Pass Filter Bpf, 6.5Mhz Ceramic Trap Bsf.
[Filter Attenuator Rf Demo Kit] The Rf Demo Kit Is A Nanovna Rf Test Board Independently Designed By Bh5hnu, With A Size Of 10 * 10Cm. For Learning Nanaovna Vector Network Analyzer, Antenna Analyzer Test Calibration Learning.
[Nanovna-H] The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-90.
Features
- [nanovna-h] New HW Version: V3.6. It is upgradeable as new firmware is developed. With MicroSD card port now can have the measurement data or the screenshots saved in the it at anytime. Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable(original PCB needs OTG cable), see a clear HD image on your phone. Added a ABS case, which is protective and dust-proof. Disply: 2.8 inch TFT (320 x240)
- [nanovna-h] The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-90
- [nanovna-h] Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. There is a PC interface that adds functionality and lets you work interactively on a bigger screen. Supports time domain analysis function (TDR). Compatible with most Android mobile phones, convenient for connecting to mobile phones. Support Windows Computer Control
- [Filter Attenuator RF Demo Kit] The RF Demo Kit is a NanoVNA RF test board independently designed by BH5HNU, with a size of 10 * 10CM. For learning nanaovna Vector Network Analyzer, Antenna Analyzer test calibration learning
- [Filter Attenuator RF Demo Kit] Tiny but Mighty: 18 functional modules; The board is totally integrated with 18 functional modules.Can be used to measure 30MHz short wave low-pass-filter LPF, 100MHz FM high-pass filter HPF, 433MHz commonly used SAW band pass filter BPF, 6.5MHz ceramic trap BSF
- See more on Amazon...
Brand: AURSINC
See On Amazon #18
RF Demo Kit RF Test Board Demo Calibration Board Portable Vector Network Analyzer Test Filter Attenuator Board with 2 UFL jumpers
Asin: B09CMR8R6R
【2 Ufl Jumpers】Equipped With 2 Ufl Jumpers, Humanized Design, Easy To Install, Convenient To Use And Operate..
【Compact & Lightweight】Small In Size And Light In Weight, Convenient To Carry And Use At Any Time, Very Convenient And Practical..
【Stable Performance】Each Module Is Carefully Selected, With High Quality And High Reliability, Have A Long Service Time..
【18 Functional Modules】The Board Fully Integrates 18 Functional Modules, Satisfy Your Multiple Needs By Various Functions..
Features
- RF Demo Kit RF Demo Kit is used to learn vector network analyzer, antenna analyzer test calibration learning.
- 18 Functional Modules The board fully integrates 18 functional modules, satisfy your multiple needs by various functions.
- 2 UFL Jumpers Equipped with 2 UFL jumpers, humanized design, easy to install, convenient to use and operate.
- Stable Performance Each module is carefully selected, with high quality and high reliability, have a long service time.
- Compact & Lightweight Small in size and light in weight, convenient to carry and use at any time, very convenient and practical.
- See more on Amazon...
Brand: Acogedor | Manufacturer: Acogedor
See On Amazon #19
Novation Circuit Mono Station Paraphonic Analog Synthesizer
Asin: B06Y4FBTVX | Model: AMS-CIRCUIT-MONO | PartNumber: AMS-CIRCUIT-MONO | Ean: 0815301000778 | UPC: 815301000778
Lfo Sync - The Circuit Mono Station Lfos Allow You To Decouple Synced Lfos From Key Sync..
Novation Now Offers A 3-Year Warranty On This And All Other Novation Products..
Envelope Trigger - You Can Choose To Have Legato Or Retriggered Envelopes. This Choice Gives An Enormous Amount Of Extra Expression In Your Circuit Mono Station Sequences..
Modular Gear - Program Notes Into The Mod Seq Page To Independently Control Your Modular And Cv Gear With Pitch And Gate Control Via The Cv/Gate Output..
Features
- Patch Flip - This feature turns Circuit Mono Station into a sound designer's dream. Create unique sequences with different presets and automation per step.
- Modular Gear - Program notes into the Mod Seq page to independently control your modular and CV gear with pitch and gate control via the CV/GATE output.
- LFO Sync - The Circuit Mono Station LFOs allow you to decouple synced LFOs from key sync.
- Envelope Trigger - You can choose to have legato or retriggered envelopes. This choice gives an enormous amount of extra expression in your Circuit Mono Station sequences.
- Novation now offers a 3-Year Warranty on this and all other Novation products.
- See more on Amazon...
Brand: Novation | Manufacturer: Focusrite/Novation
Dimensions: 2.13 x 9.84 x 9.45 inches | Weight: 3.24 pounds
Warranty: 1 year.
See On Amazon #20
Bandpass Filter 1420MHz, 80MHz Bandwidth Saw Bandpass Filter Increase Dynamic Range for Radio Astronomy
Asin: B0BQMSRFSH | Model: Cosikiofui8kbzvw | PartNumber: Cosikiofui8kbzvw
Technical Parameters: The Saw Filter Has A Bandwidth Of 80Mhz, Low Insertion Loss, Steep Cut Off Characteristic, Impedance Of 50Ohms.
Loss And Power: Strip Insertion Loss Is Less Than 3.5Db, Maximum Load Power For 10Mw (10Dbm), Interface Contain Sma M And Sma F.
Effective And Reliable: Used For Performance Optimization Of 1420Mhz Receiver, Which Can Effectively Filter Out Out Of Band , Reduce Noise And Increase Dynamic Range.
Strong Aluminum Alloy: Adopt Aluminum Alloy Shielding Shell, Interference Resistant, No Stray Response, Compact, Strong, Easy To Use.
Features
- EXCELLENT PERFORMANCE: This product is made of ultra thin PCB board inside, which still has excellent inhibition ability to the remote outside the band, and performance is far better than that of the products made with PCB bare board
- STRONG ALUMINUM ALLOY: Adopt aluminum alloy shielding shell, interference resistant, no stray response, compact, strong, easy to use
- TECHNICAL PARAMETERS: The saw filter has a bandwidth of 80MHz, low insertion loss, steep cut off characteristic, impedance of 50Ohms
- EFFECTIVE AND RELIABLE: Used for performance optimization of 1420MHz receiver, which can effectively filter out out of band , reduce noise and increase dynamic range
- LOSS AND POWER: Strip insertion loss is less than 3.5dB, maximum load power for 10mW (10dBm), interface contain SMA M and SMA F
- See more on Amazon...
Brand: Cosiki | Manufacturer: Cosiki
See On Amazon
Looking For Something Else?
Search