RVMasking 1200D Middle Center Console Boat Cover Waterproof Heavy Duty Boat Cover for Center Console Boat Fits 20'-22' Length, Beam Width up to 106" W, Gray
Asin: B0BR7YQ95D | Model: QX1003H-A08 | PartNumber: QX1003H-A08
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Enhanced Detail Design】Upgraded High-Strength Double Stitching Enhance The Anti-Tearing Performance Against The Elements. 3 Corners At The Bow And Stern Are Double Reinforced With 600D Polyester Fabric, Providing Extra Protection Against Sharp Corner In Storm. Plus, Bar-Tack Stitches Help Snap The Straps In Place Better, Reducing The Possibility Of Wearing Straps..
【Package & Support】Each Kits Arrive Ready To Install And Includes: Boat Cover*1, Straps*11, Storage Bag*1. We Provide 24 Months Customer Support. If You Have Any Question While In Use, Please Contact Us. Notice: Do Not Store Or Roll Up Boat Cover While Wet. Be Sure To Clean And Dry Before Storage. Please Measure Your Boat Before Your Purchase..
【Quick-Drying & Motor Cover】 Both Sides Of The Tail Are Equipped With An Air Vent To Prevent Water Vapor From Gathering Under The Boat Cover, Keeping The Boat Dry And Extending The Service Life Of The Product. Motor Cover Is Sewn To The End Of The Boat Cover So As To Keep The Motor Clean And Dry..
【Windproof & Snugly Fit】 Compared With Other Center Console Boat Cover, Our Thicken 1200D Fabric In The Middle Decrease The Possibility Of Tearing By Wind. 11 Pcs Adjustable Tie-Down Straps With Quick-Released Buckles Provides Easy Installation And Quick Release, Keeping The Boat Cover Firmly In Place To Prevent The Cover From Blowing Away. All-Around Bottom Elastic Hem Ensures A 360 Degree Custom-Fit For Your Boat..
Features
- Thicken 1200D Fabric RVMasking center console boat cover is made of high-strength 1200D polyester in the middle and 600D polyester in both ends, waterproof PU coating and anti-UV coating. It provides better water resistance than pure 600D fabric, protecting your boats from scratch, dust, rain, snow, and UV rays. Tip: you can buy a support rod to prevent water accumulation. Fits 20'-22' Long and Beam Width up to 106 inches.
- Windproof & Snugly Fit Compared with other center console boat cover, our thicken 1200D fabric in the middle decrease the possibility of tearing by wind. 11 pcs adjustable tie-down straps with quick-released buckles provides easy installation and quick release, keeping the boat cover firmly in place to prevent the cover from blowing away. All-around bottom elastic hem ensures a 360 degree custom-fit for your boat.
- Enhanced Detail Design Upgraded High-strength double stitching enhance the anti-tearing performance against the elements. 3 corners at the bow and stern are double reinforced with 600D polyester fabric, providing extra protection against sharp corner in storm. Plus, BAR-TACK stitches help snap the straps in place better, reducing the possibility of wearing straps.
- Quick-drying & Motor Cover Both sides of the tail are equipped with an air vent to prevent water vapor from gathering under the boat cover, keeping the boat dry and extending the service life of the product. Motor cover is sewn to the end of the boat cover so as to keep the motor clean and dry.
- Package & Support Each kits arrive ready to install and includes: boat cover*1, straps*11, storage bag*1. We provide 24 months customer support. If you have any question while in use, please contact us. Notice: Do not store or roll up boat cover while wet. Be sure to clean and dry before storage. Please measure your boat before your purchase.
- See more on Amazon...
Brand: RVMasking | Manufacturer: RVMasking
See On Amazon Similar To RVMasking 1200D Middle Center Console
#1
RVMasking Middle 1200D Reinforced Boat Cover with Storage Bag Trailerable Marine Grade Waterproof Boat Cover Fits Bass Boat, V-Hull, Runabout, Length: 17'-19', Beam Width up to 96", Gray
Asin: B0BR7YW5CG | Model: boat cover | PartNumber: boat cover
【Additional Reinforcements】3 Corners At The Bow And Stern Are Double Reinforced With 600D Polyester Fabric To Reduce Tearing At The Typical Wear Points. All Seams Are Triple Fold And Double Stitched For Better Durability. Plus, Bar-Tack Stitches On The Strap Help Snap The Straps In Place Better, Reducing The Possibility Of Wearing Straps..
【Package & Support】Each Kits Arrive Ready To Install And Includes: Boat Cover*1, Straps*11, Storage Bag*1. We Provide 24 Months Customer Support. If You Have Any Question While In Use, Please Contact Us. Notice: Do Not Store Or Roll Up Boat Cover While Wet. Be Sure To Clean And Dry Before Storage. Please Measure Your Boat Before Your Purchase..
【Moisture Control & Quick-Drying】 Both Sides Of The Tail Are Equipped With An Air Vent To Prevent Water Vapor From Collecting Under The Cover, Keeping The Boat Dry And Prolong Product Life. Tip: You Can Also Buy A Support Rod To Prevent Water Accumulation..
【Windproof & Custom-Fit】 Compared With Other Boat Cover, Our Thicken 1200D Fabric In The Middle Decrease The Possibility Of Tearing On The Windshield Part By Wind. 11 Pcs Adjustable Tie-Down Straps With Quick-Released Buckles Keep The Boat Cover Firmly In Place To Avoid Being Blown Away. All-Around Bottom Elastic Hem Ensures A 360 Degree Custom-Fit For Your Boat..
Features
- Middle Reinforced Fabric Made of high-strength 1200D polyester in the middle and 600D polyester in both ends, this boat cover provides better water resistance performance than pure 600D fabric boat cover with the waterproof PU coating and anti-UV coating, protecting your boats from scratch, dust, rain, snow, and UV rays. Fits 17'-19' Long Boat and Beam Width up to 96 inches.
- Windproof & Custom-fit Compared with other boat cover, our thicken 1200D fabric in the middle decrease the possibility of tearing on the windshield part by wind. 11 pcs adjustable tie-down straps with quick-released buckles keep the boat cover firmly in place to avoid being blown away. All-around bottom elastic hem ensures a 360 degree custom-fit for your boat.
- Additional Reinforcements 3 corners at the bow and stern are double reinforced with 600D polyester fabric to reduce tearing at the typical wear points. All seams are triple fold and double stitched for better durability. Plus, BAR-TACK stitches on the strap help snap the straps in place better, reducing the possibility of wearing straps.
- Moisture Control & Quick-drying Both sides of the tail are equipped with an air vent to prevent water vapor from collecting under the cover, keeping the boat dry and prolong product life. Tip: you can also buy a support rod to prevent water accumulation.
- Package & Support Each kits arrive ready to install and includes: boat cover*1, straps*11, storage bag*1. We provide 24 months customer support. If you have any question while in use, please contact us. Notice: Do not store or roll up boat cover while wet. Be sure to clean and dry before storage. Please measure your boat before your purchase.
- See more on Amazon...
Brand: RVMasking | Manufacturer: RVMasking
See On Amazon #2
Budge B-1221-X7 1200 Denier Hard Top/T-Top Boat Cover Fits 22 ft. to 24 ft. Beam Width Up to 106 in, Gray
Asin: B00KG12NDK | Model: B-1221-X7 | PartNumber: B-1221-X7 | Ean: 0018397118673 | UPC: 018397118673
Designed To Stay Secure: Our Elasticized Hem, Top And Bottom Sewn-In Straps And Buckles Keep Your Cover In Place. Great For Trailer Use And Outdoor Storage.
Sized To Fit: Our Custom-Like Design Budge 1200 Denier Boat Cover Fits Hard Top / T-Top Boats. This Boat Cover Fits Hard Top / T-Top Boats 22'-24' (264"-288") Long, Beam Width Up To 106".
Waterproof Inside And Out: Reinforced, Waterproof Seams Keep Moisture Out. Sewn-In Air Vents Keep Condensation From Accumulating.
Features
- PROTECTION FROM THE ELEMENTS: Made from 100% waterproof 1200 denier polyester, strong enough to protect your boat from rain, snow, dirt, dust, tree sap, leaves, pollen, bird droppings and more. Excellent UV Protection keeps your upholstery from fading
- WATERPROOF INSIDE AND OUT: Reinforced, waterproof seams keep moisture out. Sewn-in air vents keep condensation from accumulating
- DESIGNED TO STAY SECURE: Our elasticized hem, top and bottom sewn-in straps and buckles keep your cover in place. Great for trailer use and outdoor storage
- SIZED TO FIT: Our custom-like design Budge 1200 Denier Boat Cover fits Hard Top / T-Top Boats. This boat cover fits Hard Top / T-Top boats 22'-24' (264-288) Long, beam width up to 106
- See more on Amazon...
First Available: 05/20/2014
Brand: Budge | Manufacturer: Budge
Dimensions: 1.00 x 288.00 x 106.00 inches | Weight: 14.50 pounds
Warranty: 7 Year Warranty
See On Amazon #3
Budge B-1201-X6 1200 Denier V-Hull Runabout Boat Cover Gray 20'-22' Long (Beam Width Up to 106") Waterproof, Heavy Duty, UV Resistant
Asin: B007EDNOD6 | Model: B-1201-X6 | PartNumber: B-1201-X6 | Ean: 0018397117560 | UPC: 018397117560
Designed To Stay Secure: Our Elasticized Hem, Top And Bottom Sewn-In Straps And Buckles Keep Your Cover In Place. Great For Trailer Use And Outdoor Storage.
Sized To Fit: Our Custom-Like Design Budge 1200 Denier Boat Cover Fits V-Hull Runabout Boats. This Boat Cover Fits V-Hull Runabout Boats 20'-22' (240"-264") Long, Beam Width Up To 106".
Waterproof Inside And Out: Reinforced, Waterproof Seams Keep Moisture Out. Sewn-In Air Vents Keep Condensation From Accumulating.
Features
- PROTECTION FROM THE ELEMENTS: Made from 100% waterproof 1200 denier polyester, strong enough to protect your boat from rain, snow, dirt, dust, tree sap, leaves, pollen, bird droppings and more. Excellent UV Protection keeps your upholstery from fading
- WATERPROOF INSIDE AND OUT: Reinforced, waterproof seams keep moisture out. Sewn-in air vents keep condensation from accumulating
- DESIGNED TO STAY SECURE: Our elasticized hem, top and bottom sewn-in straps and buckles keep your cover in place. Great for trailer use and outdoor storage
- SIZED TO FIT: Our custom-like design Budge 1200 Denier Boat Cover fits V-Hull Runabout Boats. This boat cover fits V-Hull Runabout boats 20'-22' (240-264) Long, beam width up to 106
- See more on Amazon...
First Available: 05/20/2014
Brand: Budge | Manufacturer: Budge
Dimensions: 1.00 x 264.00 x 106.00 Inches | Weight: 14.50 Pounds
Warranty: 7 Year Warranty
See On Amazon #4
RVMasking 1200D Middle Center Console Boat Cover Fits 17'-19' Length
Asin: B0CH9W64NH
Features
- Thicken 1200D Fabric RVMasking center console boat cover is made of high-strength 1200D polyester in the middle and 600D polyester in both ends, waterproof PU coating and anti-UV coating. It provides better water resistance than pure 600D fabric, protecting your boats from scratch, dust, rain, snow, and UV rays. Tip: you can buy a support rod to prevent water accumulation. Fits 17'-19' Long and Beam Width up to 102 inches.
- See more on Amazon...
Brand: RVMasking | Manufacturer: RVMasking
Dimensions: 5.51 x 13.39 x 12.60 inches
See On Amazon
Looking For Something Else?
Search