M2 HSS Taper Chucking Reamer 5pcs Set, 3/8", 1/2", 9/16", 5/8", 3/4", Fit 3/8" or 1/2" Shank Chuck, Spiral Flute, Bridge/Construction Reamer for Steel, Alloy, Aluminum, Wood, Plastic
Asin: B0BRPPWBWS
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 5 Pieces, Including 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" , 9/16" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: allow entry into overlapping holes.
- [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 5 pieces, including 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 , 9/16 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon Similar To M2 HSS Taper Chucking Reamer
#1
Performance Tool W2967 Tapered Reamer Set with T-Handle and Carbon Steel Contstruction to Align Holes or Remove Burrs from Pipe, Tubes, and More (2-Piece), Black
Asin: B073XVRG74 | Model: W2967 | PartNumber: W2967 | Ean: 0039564012730 | UPC: 039564012730
T-Handle Design For Easy Turning And Sure Handling.
Lifetime Warranty: Each Tool Is Tested Against Industry Standards For Hardness, Torque, Finish, And Usability And Should Last A Lifetime Under Normal Use.
Capacity: 1/8" To 1/2" (3 - 13Mm) And 5/32" To 7/8" (4 - 22Mm).
The Heat Treated #45 High Carbon Steel For Longer Service Life.
Features
- Tapered reamers will help align holes, remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, and other materials
- The heat treated #45 high carbon steel for longer service life
- T-handle design for easy turning and sure handling
- Capacity: 1/8 to 1/2 (3 - 13mm) and 5/32 to 7/8 (4 - 22mm)
- LIFETIME WARRANTY: Each tool is tested against industry standards for hardness, torque, finish, and usability and should last a lifetime under normal use
- See more on Amazon...
Brand: Performance Tool | Manufacturer: Performance Tool
Dimensions: 8.65 x 0.90 x 4.25 inches | Weight: 0.55 Pounds
Warranty: lifetime
See On Amazon #2
5/8 Bridge Construction Reamer Drill Bit, M2 HSS Taper Chucking Reamer for Steel Alloy Metal Wood Plastic, 1/2" Non-Slip Shank, 5-Spiral Flutes Car Reamer, to Align or Enlarge Holes, 16mm
Asin: B0CFJC9J1N
Special Features – The 5/8Inch Reamer Bit Features A 1/2" Round Shank With 3-Sides, A Tapered Point, And A Safe Stop, Ensuring A Firm Grip In The Chuck, Allowing It To Enter Imperfect Holes To Ream Steadily, And Stopping The Drill Safely When The Hole Is Complete..
User Tips: 1. Always Wear Appropriate Safety Gear. 2. Securely Mount The Reamer Drill Bit In The Chuck Of Your Portable Electric Or Pneumatic Tools. 3. Position The Bit In The Predrilled Hole, Gradually Increase Speed, Maintain Pressure, Keep The Tool Steady, And Add Cutting Oil. 4. Reduce Speed Near The Desired Hole Size For A Smooth Finish..
Broad Applications – This 5/8" Reamer Drill Bit Can Efficiently Handle Steel, Metal, Alloy Aluminum, Brass, Copper, Iron, Nickel, Plastic And Pvc Pipes Etc.; Makes It A Go-To Tool For Both Woodworking And Metalworking Projects, Such As Bridge Construction, Steel Erection, Automotive Truck Trailer Maintenance..
Built To Last - Our 5/8" Conduit Reamer Is Constructed With M2 High-Speed Steel. Featuring Five Long Tapped Right-Hand Spiral Flutes With Precisely Ground Sharp Edges, Enables It To Cut Materials Smoothly And Remove Debris Efficiently, And Guarantees Durability And Performance..
Features
- Seamlessly and Expertly - The bridge reamer, also known as construction reamers, is used to align or enlarge or smooth Predrilled holes to 5/8" and fit precisely before installing bolts or rivets. This heavy-duty 5/8" reamer drill bit is crafted to ensure seamless and expert performance in your projects.
- Built to Last - our 5/8 conduit reamer is constructed with M2 high-speed steel. Featuring five long tapped right-hand spiral flutes with precisely ground sharp edges, enables it to cut materials smoothly and remove debris efficiently, and guarantees durability and performance.
- Special Features The 5/8inch reamer bit features a 1/2 Round Shank with 3-Sides, a Tapered Point, and a Safe Stop, ensuring a firm grip in the chuck, allowing it to enter imperfect holes to ream steadily, and stopping the drill safely when the hole is complete.
- Broad applications This 5/8 reamer drill bit can efficiently handle steel, metal, alloy aluminum, brass, copper, iron, nickel, plastic and PVC pipes etc.; makes it a go-to tool for both woodworking and metalworking projects, such as bridge construction, steel erection, automotive truck trailer maintenance.
- User Tips: 1. Always wear appropriate safety gear. 2. Securely mount the reamer drill bit in the chuck of your portable electric or pneumatic tools. 3. Position the bit in the Predrilled Hole, gradually increase speed, maintain pressure, keep the tool steady, and add cutting oil. 4. Reduce speed near the desired hole size for a smooth finish.
- See more on Amazon...
Brand: DKIBBITH | Manufacturer: DKIBBITH
See On Amazon #3
5PCS M2 HSS Taper Chucking Reamer Set,3/8",1/2",5/8",3/4",1 Reamer Fit 1/2" Round Shank,Bridge/Construction Reamer Drill Bit for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole Reamer
Asin: B0CWRLL4BP | Model: BR-010 | PartNumber: BR-010
Makes Reaming Holes Out Extremely Easier Than Using Large Drill Bits,The Reamed Hole Is Smooth Without Tear-Outs. But There Must Be An Existing Hole Or Pilot Hole With A Diameter Smaller Than Our Bridge Steel Reamer Bit Before Use.
Commonly Used In Bridge,Construction,Steel Erection And Automotive Truck Trailer Industries,Our Bridge/Construction Reamer Bit For Steel,Metal,Alloy Aluminum,Brass,Plastic,Iron,Nickel,Copper,Cast Iron Etc.Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools.
The Tapered Point Design Permits The Tapered Reamer For Metal To Enter Into The Overlapping Holes Of Out-Of-Line,Make The Bolt Holes Line Up.Enlarging The Holes In The Steering Knuckles And Pitman Arm.
The Heavy Duty High-Speed Steel Bridge Reamer Is Also Called Construction Reamers,It Used For Aligning An Existing Hole And Enlarging Undersized Hole Prior To Bolt Or Rivet Installation.Our Taper Reamer Bit Aligns And Enlarges Pre-Drilled Holes Ready For Bolting.
Features
- M2 HSS taper chucking reamer 5pcs set including 3/8",1/2",5/8",3/4" and 1 fit 1/2" shank chuck with 5-Spiral Flute. The bridge construction reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to enlarge a hole, you must first have an existing hole and then use our taper reamer to enlarge it
- The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our taper reamer bit aligns and enlarges pre-drilled holes ready for bolting
- Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be an existing hole or pilot hole with a diameter smaller than our bridge steel reamer bit before use
- The tapered point design permits the tapered reamer for metal to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm
- Commonly used in bridge,construction,steel erection and automotive truck trailer industries,our bridge/construction reamer bit for steel,metal,alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools
- See more on Amazon...
Brand: NOVINO | Manufacturer: NOVINO
See On Amazon #4
uxcell 1/8" 3/16" 1/4" 5/16" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool Reamer Set for Bore Machining 4pcs
Asin: B09C8M58TC | Model: a20103000ux0036 | PartNumber: a20103000ux0036
Wide Applications: Sharp Blade For Easy Cutting And High Efficiency. Used For Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, Alloy, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Used On Screw Machines, Turret Lathes, Drilling And Milling Machines. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of High-Speed Steel, The Reamers Have Combination Of Hardness And Toughness For Wear Resistance. The Cutter Body Is Sturdy And Damage-Resistant, With Strong Heat Resistance That Stable Processing. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: Cutting diameter: 1/8", 3/16", 1/4", 5/16"; accuracy class: H7. The hand reamers ream the cylindrical shape. Good for general purpose applications. Straight round shank provides a stable holding and can be used with a variety of tool holding systems.
- Material and Coating: Made of high-speed steel, the reamers have combination of hardness and toughness for wear resistance. The cutter body is sturdy and damage-resistant, with strong heat resistance that stable processing. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Sharp blade for easy cutting and high efficiency. Used for processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, alloy, and other soft materials.
- Easy to Use: Can be used on screw machines, turret lathes, drilling and milling machines. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #5
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs
Asin: B08ZM5TN75 | Model: a20102800ux0553 | PartNumber: a20102800ux0553
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs
Asin: B08ZM5897V | Model: a20102800ux0555 | PartNumber: a20102800ux0555
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
Lichamp 4 Piece Reamers Set for Metal, Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers
Asin: B0B5HW8N41 | Model: TRS-A10400 | PartNumber: TRS-A10400
Wide Applications - Works Well In Free Cutting And Carbon Steels, As Well As Soft, Non-Ferrous Materials Such As Aluminum, Brass And Copper..
Safe Straight Shank - Round Shank With 3 Flats To Prevent Slipping In The Drill Chuck, Safety Flange/ Stop Collar To Prevent The Reamer Running Through The Hole..
Five Grooves Fast Drilling - Reversed Spiral Push Chips Forward And Are Ideal For Through-Hole Applications, Reduces The Friction, Runs Cooler, Performs Well In Heat, Corrosion And Rust Resistance..
M2 High Speed Steel - Hss M2 Ensures Sharp And Fast Execution In Most Hard Steel Material For Clean Results, While Provides Good Wear Resistance In Mild Steels And Non-Ferrous Materials..
Features
- Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles.
- M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials.
- Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper.
- Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance.
- Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole.
- See more on Amazon...
Brand: Lichamp | Manufacturer: Lichamp
Dimensions: 2.17 x 8.46 x 5.91 inches | Weight: 1.76 Pounds
See On Amazon #8
Saipe 5/8" Spiral Flute Reamer with 1/2 inch Shank, M2 HSS Bridge/Construction Reamer Taper Chucking Reamer Drill Bit Car/Maintenance Reamer for Steel, Alloy, Aluminum, Copper, Plastic
Asin: B0BKFY973Q | Model: 5/8" Spiral Flute Reamer | PartNumber: 5/8" Spiral Flute Reamer
【3-Flat Design】Three Symmetrically Placed Flats On The Shank Provide Positive Grip In Portable Power And Air Tools. The Short Length Is Convenient For Use In Areas With Limited Access..
【Taper Chucking Reamer】The Reamer Is Widely Used In Bridge, Construction, Steel Erection / Fabrication, And Automotive (Truck & Trailer) Industries. Notice: It Requires An Existing Hole Or A Pilot Hole!.
【Widely Used】Bridge/Construction Reamers Are Used To Align Existing Holes Before Installing Bolts Or Rivets. Suitable For Use In A Wide Range Of Materials Such As Aluminum, Brass, Cast Iron, Copper, Iron, Metal, Plastic, Steel, Etc..
【Tapered Point & Spiral Flutes & Safety Stop】Tapered Design Allow Entry Into Overlapping Holes; Spiral Flutes Can Discharge The Chips Easily; Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- Bridge Reamer The package contains a 5/8 inch reamer with 1/2 inch shank. Made of high quality M2 HSS 6542 for high hardness and durability.
- Tapered Point & Spiral Flutes & Safety Stop Tapered design allow entry into overlapping holes; Spiral Flutes can discharge the chips easily; Safety collar stop to prevent over penetration and operator loss of stability.
- 3-Flat Design Three symmetrically placed flats on the shank provide positive grip in portable power and air tools. The short length is convenient for use in areas with limited access.
- Widely Used Bridge/Construction reamers are used to align existing holes before installing bolts or rivets. Suitable for use in a wide range of materials such as Aluminum, Brass, Cast Iron, Copper, Iron, Metal, Plastic, Steel, etc.
- Taper Chucking Reamer The reamer is widely used in bridge, construction, steel erection / fabrication, and automotive (truck & trailer) industries. Notice: It requires an existing hole or a pilot hole!
- See more on Amazon...
Brand: Saipe | Manufacturer: Saipe
See On Amazon #9
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 8pcs
Asin: B08ZM5NTWB | Model: a20102800ux0551 | PartNumber: a20102800ux0551
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search