ARTILAURA 0-90ohm Fuel Sending Unit, Boat Fuel Sender, 9" (225mm) Stainless Steel Marine Fuel Tank Sender Gas Water Fuel Gauge Sensor for Boat Car Truck Vehicle
Asin: B0BV6RTCWL | Model: 0-90 Fuel Sending Unit | PartNumber: 0-90 Fuel Sending Unit
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.🚙[Output]: Length Range Of Fuel Sender To Choose: 5 Inch-18 Inch. The Fule/Water Level Sensor With Output 0-90 Ohms (0 Ohms At Empty, 90 Ohms At Full). The Fuel Sending Unit Comes With 1 X Sensor, 1 X Gasket, 5 X Screws And 1 X Instructions..
⭐⭐⭐⭐⭐[Attention]: 1 Inch(25Mm) Clearance Must Be Maintained Between The Tank Bottom And The Float Retaining Collar In Addition To Adjacent Side Or Baffle Of Tank. Please Contact Us If You Are Dissatisfied With Our Products, The Response Will Be Taken In 24 Hours And Provide Proper Solutions..
🚌[Easy To Install]: Sae 5 Hole Mounting Pattern, Easy To Install And Hookup.The Well-Written And Illustrated Instructions Are Straight Forward That Will Easy To Follow..
🚘[Wide Application]: The Fuel Level Sender Is Suitable For Boat, Auto,Trucks, Buses And Marine Field. Fit For Fuel Level Gauge,Water Level Gauge And Any Kinds Of Liquids Without Impurities..
Features
- [Material]: 0-90 ohm Fuel sending unit is made with heavy duty stainless steel. This water level sensor is reed switch, durability and reliability, steady output signal. No adjustment needed for tank.
- [Wide Application]: The fuel level sender is suitable for Boat, Auto,Trucks, Buses and Marine field. Fit for Fuel Level Gauge,Water Level Gauge and any kinds of liquids without impurities.
- [Output]: Length range of fuel sender to choose: 5 inch-18 inch. The Fule/Water Level Sensor with output 0-90 ohms (0 ohms at empty, 90 ohms at full). The fuel sending unit comes with 1 x Sensor, 1 x Gasket, 5 x Screws and 1 x instructions.
- [Easy to Install]: SAE 5 hole mounting pattern, easy to install and hookup.The well-written and illustrated instructions are straight forward that will easy to follow.
- [Attention]: 1 inch(25mm) clearance must be maintained between the tank bottom and the float retaining collar in addition to adjacent side or baffle of tank. Please contact us if you are dissatisfied with our products, the response will be taken in 24 hours and provide proper solutions.
- See more on Amazon...
Brand: ARTILAURA | Manufacturer: ARTILAURA
Dimensions: 0.71 x 9.00 x 0.71 inches
See On Amazon Similar To ARTILAURA 090ohm Fuel Sending Unit
#1
SEACHOICE 15461 Marine 6-Inch to 12-Inch Gas or Diesel Fuel Electric Sending Unit Kit
Asin: B002IZBLEO | Model: 15461 | PartNumber: 15461 | Ean: 0719249154619 | UPC: 719249154619
Can Be Used For Gas Or Diesel.
Includes Mounting Screws And Gasket.
Manufacturer Part Number 50-15461.
Compatible With 35 To 240 Ohm Gauges.
Suitable Tank Depth: 6 To 12 Inches.
Features
- Provides accurate fuel level information
- Suitable Tank Depth: 6 to 12 inches
- Can be used for gas or diesel
- Compatible with 35 to 240 ohm gauges
- Includes mounting screws and gasket
- Manufacturer part number 50-15461
- See more on Amazon...
First Available: 10/04/2018
Brand: SEACHOICE | Manufacturer: Seachoice
Dimensions: 17.75 x 6.75 x 2.50 inches | Weight: 0.50 pounds
Warranty: http://www.seachoice.com/warranty-information
See On Amazon #2
Moeller Marine 035722-10, Fuel Tank Sending Unit, Electric 6 to 12 Inch Tank Depth
Asin: B000MTI15K | Model: 035722-10 | PartNumber: 035722-10 | Ean: 0039729722108, 0739729722107 | UPC: 739729722107, 039729722108
Internal Components Will Not Rust Or Corrode.
Complete With 5 Hole Gasket And Screws.
Requires Connection To A Dash Mounted Gauge.
Features
- Calibrated to the Industry Standard of 33-240 Ohms
- Requires connection to a dash mounted gauge
- Internal components will not rust or corrode
- Complete with 5 hole gasket and screws
- See more on Amazon...
First Available: 01/19/2007
Brand: Moeller | Manufacturer: Moeller Marine Products
Dimensions: 5.75 x 16.25 x 12.00 inches | Weight: 0.20 pounds
Warranty: Manufacturer
See On Amazon #3
Dorman 55818 Universal Fuel Level Sending Unit Kit
Asin: B019CXVE9G | Model: 55818 | PartNumber: 55818 | Ean: 0037495558181 | UPC: 037495558181
Factory Oem Fit Form And Function.
First Available: 07/12/2016
Brand: Dorman | Manufacturer: Dorman Products
Dimensions: 16.54 x 2.76 x 2.85 Inches | Weight: 0.75 Pounds
Warranty: Limited Lifetime Warranty
See On Amazon #4
100TECH Marine Fuel Gauge Boat Gauge Fuel Gauge Aftermarket Fuel Level Gauge Marine Automotive Replacement Gauge 240-33ohm 0-190ohm 240-30ohm 0-180ohm 10-180ohm Motocycle Car Truck Vehicle White
Asin: B093ZZ7FR7 | Model: YBUW | PartNumber: YBUW | Ean: 0707025085264 | UPC: 707025085264
［7 Color Adjustment Cycle Modes］ Includes Red(Default), Green, Blue, White, Yellow, Yellow Green, Orange, Purple Allow You To Match Your Factory Dashboard Lights Or Add A Custom Style To The Interior Of Your Vehicle.
.
［Body Material］Ip67 Waterproof And Dustproof Grade,316 Stainless Steel Bezel100Tech Guarantees With 1 Year Limited Warranty & Free Lifetime Technical Support.
Note:
1)The Default Setting Of This Fuel Level Gauge Is 240-33Ohm.
2)This 100Tech Fuel Gauge Can Only Work With The Level Sender With The Corresponding Resistive Output ：240-33Ohm 0-190Ohm 240-30Ohm 0-180Ohm 10-180Ohm . The Resistance Range Can Be Adjusted By Simply Pressing A Button.
3)This Boat Fuel Gauge Can Not Work With The Fuel Sending Unit With Output Signal(0-30Ohm, 0-90Ohm,73-10 Ohm Etc.)
.
［Easy To Install And Calibrate］ Install Diameter: Φ52mm Or 2-1/16'', Indication Range: E~F, Working Voltage: 9-32V Dc [ Fit 12V-24V Vehicle Or Engine] The Instruction Is Easy.
［A Fine Replacement Fuel Guage］ The Needle Is Smooth Sweeping And Surpasses The Original Version In The Boat(The Needle Doesn't Bounce All Over The Place As The Boat Is Underway Or In Rough Sea Conditions).
.
Features
- Adjustable and Wide Application 100TECH Fuel Level Gauge is Designed to Measure & Display the Amount of gas or Fuel in Your Boat or Vehicle's Gas Tank. Signal Input : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm.
- A Fine Replacement Fuel Guage The Needle is Smooth Sweeping and Surpasses the Original Version in the Boat(the Needle doesn't Bounce all over the Place as the Boat is Underway or in Rough Sea Conditions).
- 7 Color Adjustment Cycle Modes Includes Red(Default), Green, Blue, White, Yellow, Yellow Green, Orange, Purple Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle.
- Easy to install and Calibrate Install diameter: 52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine] The instruction is Easy
- Body Material IP67 waterproof and Dustproof grade,316 Stainless Steel Bezel100TECH Guarantees with 1 Year Limited Warranty & Free Lifetime Technical Support
- Note:
1)The Default Setting of This Fuel Level Gauge is 240-33ohm.
2)This 100TECH Fuel Gauge Can Only Work With The Level Sender With The Corresponding Resistive Output 240-33ohm 0-190ohm 240-30ohm 0-180ohm 10-180ohm . The Resistance Range Can Be Adjusted By Simply Pressing A Button.
3)This Boat Fuel Gauge Can Not Work With the Fuel Sending Unit with Output Signal(0-30ohm, 0-90ohm,73-10 ohm etc.)
- See more on Amazon...
Brand: 100Tech | Manufacturer: 100TECH Direct
Dimensions: 2.50 x 2.50 x 2.50 inches | Weight: 0.24 pounds
See On Amazon #5
RUPSE Fuel Sender Unit Boat Fuel Tank Sending Unit Fuel Water Level Sensor Stainless Steel Fuel Sender and Fuel Gauge for Boat Car Truck RV (8" (200mm))
Asin: B09PZXKP7G | Model: 03CE30GMAU001 | PartNumber: 03CE30GMAU001 | Ean: 0192032001046 | UPC: 192032001046
[Easy Installation]: Sae 5 Hole Mounting Pattern, Nbr Material Gasket, Good Sealing Performance, High Oil Resistance, With M5 5 Screws, 10 Quick Wiring Terminals, Easy And Quick Installation By Referring To The Wiring Diagram..
[Multi-Size]: Various Sizes Can Be Selected To Meet Different Sizes Of Fuel Tanks For Automobiles, Ships, Yachts, Rv, Agricultural Vehicles And Industrial Equipment..
[Easy To Read]: The Fuel Level Gauge Has 8 Adjustable Backlight Colors, Ip67 Waterproof, Stainless Steel Frame, Anti-Fog Curved Glass, Easy To Read (Empty-1/2-Full)..
Features
- [High Precision and Long Life]: The exterior is made of stainless steel, and the interior is controlled by high-quality reed switches. The sensor is corrosion-resistant, does not rust, has a long life, stable output signal, and accurate measurement. Suitable for gasoline, diesel, water, methanol, etc.
- [Easy to Read]: The fuel level gauge has 8 adjustable backlight colors, IP67 waterproof, stainless steel frame, anti-fog curved glass, easy to read (Empty-1/2-Full).
- [Easy Installation]: SAE 5 hole mounting pattern, NBR material gasket, good sealing performance, high oil resistance, with M5 5 screws, 10 quick wiring terminals, easy and quick installation by referring to the wiring diagram.
- [Multi-Size]: Various sizes can be selected to meet different sizes of fuel tanks for Automobiles, Ships, Yachts, RV, Agricultural vehicles and Industrial equipment.
- See more on Amazon...
Brand: RUPSE | Manufacturer: RUPSE
Dimensions: 2.00 x 13.00 x 2.00 Inches
Warranty: 1year
See On Amazon #6
Seachoice Fuel Electric Sending Unit Boat Kit, 6-27 in. Tank
Asin: B0010VA1ES | Model: 15421 | PartNumber: 15421 | Ean: 0719249154213 | UPC: 719249154213
Compatible With 35 To 240 Ohm Gauges.
Includes Mounting Screws And Gasket.
Manufacturer Part Number 50-15421.
Can Be Used For Gas Or Diesel.
Suitable Tank Depth: 6 To 27 Inch.
Features
- Provides accurate fuel level information
- Suitable Tank Depth: 6 to 27 inch
- Compatible with 35 to 240 ohm gauges
- Can be used for gas or diesel
- Includes mounting screws and gasket
- Manufacturer part number 50-15421
- See more on Amazon...
First Available: 10/04/2018
Brand: SEACHOICE | Manufacturer: Seachoice
Dimensions: 17.75 x 6.75 x 2.67 inches | Weight: 0.25 pounds
Warranty: http://www.seachoice.com/warranty-information
See On Amazon #7
Actron Bosch SP0F000013 Fuel Level Sender
Asin: B00VAGA19S | Model: SP0F000013 | PartNumber: SP0F000013 | Ean: 0028851027007 | UPC: 028851027007
Includes Gasket And Mounting Hardware.
Resistance Specifications: Empty - 240 Ohms; 1/2 - 130 Ohms; Full - 33 Ohms.
For Use With Bosch Fuel Level Gauges And 5" - 26" Deep Tanks.
Features
- Fuel level sender
- For use with Bosch fuel level gauges and 5 - 26 deep tanks
- Includes gasket and mounting hardware
- Resistance specifications: Empty - 240 ohms; 1/2 - 130 ohms; Full - 33 ohms
- See more on Amazon...
First Available: 03/27/2015
Brand: Actron | Manufacturer: Bosch
Dimensions: 3.00 x 16.50 x 3.00 inches | Weight: 1.00 pounds
See On Amazon #8
100TECH Fuel Sending Unit 240-33 ohms 8"(200mm) Marine for Boat Vehicle Truck RV Fuel Tank Sending Unit Fuel Water Level Sending Unit Fuel Gas Sender Fuel Water Level Sensor Fuel Gauge Sending Unit
Asin: B092MVQRV2 | Model: BY200-240 | PartNumber: BY200-240 | Ean: 0757842002302 | UPC: 757842002302
[Easy To Install] The Fuel Level Sending Unit Comes With Gasket,Mounting Screws,Well-Written And Illustrated Instructions; The Wiring Instructions Are Straight Forward And Easy To Follow.
.
100Tech Guarantees With 1 Year Limited Warranty & Free Lifetime Technical Support
Attention: To Allow The Fule Sender Not Hit The Bottom Of The Tank, Please Measure From The Top Of Your Tank To The Bottom On The Outside And Subtract 1 Inch The Length Of Sender.
.
[The Size Of Float] The Diameter Of Float Is 1.38"(35Mm). If You Have To Drill The Hole, Diameter 1.50"(38Mm) Hole Would Be Perfect..
Sae 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel And Rugged Construction. Wide Application: It Could Support Fuel Level Gauge And Water Level Gauge For Boat/Auto.
.
The Fule/Water Level Sensor With American Standard Output 240-33 Ohms (240 Ohms At Empty, 33 Ohms At Full). If You Need Lengths Other Than 4"-32", Please Contact Us Directly For More Information.
.
Features
- 100TECH Stainless Steel Fule Tank Sending Unit is Made With OKI Reed Switch(Imported from Japan). It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability.
Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.
- The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full). If you Need Lengths Other than 4-32, Please Contact us Directly for More Information.
- [Easy to Install] The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Well-Written and Illustrated instructions; The Wiring Instructions are Straight Forward and Easy to follow.
- SAE 5 hole Mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. Wide Application: It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto.
- 100Tech Guarantees with 1 Year Limited Warranty & Free Lifetime Technical Support
Attention: To Allow the Fule Sender not Hit the Bottom of the Tank, Please Measure from the Top of Your Tank to the Bottom on the Outside and Subtract 1 Inch the Length of Sender.
- [The Size of Float] The Diameter of Float is 1.38(35mm). If You Have to Drill the hole, Diameter 1.50(38mm) Hole Would be Perfect.
- See more on Amazon...
Brand: 100Tech | Manufacturer: 100TECH direct
See On Amazon #9
Fuel Sending Unit 240-33 ohms 5"(130mm) for Marine Boat Truck Car Fuel Sending Unit Marine Fuel Gauge Sending Unit Truck Gas Tank Fuel Sender Fuel Water Level Sensor
Asin: B0B4JRW4PV
Wide Range Of Application: The Fuel Gauge Sending Unit Is Widely Used In Boat, Truck, Bus And Marine Fields, And Can Support Marine And Automotive Fuel Level Gauges And Water Level Gauges.
Please Note: In Order To Keep The Fuel Water Level Sensor From Touching The Bottom Of The Tank, If The Tank Is Made Of Metal, The Length Of The Sensor Should Be 0.5 Inch Less Than The Depth Of The Tank. If The Tank Is Made Of Plastic, The Length Of The Sensor Should Be 1Inch Less Than The Depth Of The Tank.
Simple Installation: The Package Comes With Mounting Screws, Washers, Just Remove The Old Gas Tank Fuel Sender And Install The New One, The Water Level Sensor Is A Standard Sae 5 Hole Mounting Pattern, And The Installation Takes About 15 Minutes In Total, You Can Let The Fuel Gauge Work Again, The Red Wire Is Positive And The Blue Wire Is Negative.
Durable Material: The Fuel Sending Unit Is Made Of Heavy Duty 316 Stainless Steel, Which Is Reliable And Durable, Anti-Vibration, Explosion-Proof, Can Read Data Accurately, And Can Maintain Excellent Performance In Various Environments.
Features
- Superior Performance: Our fuel tank sending unit has an advantage over thick film swim arm level sensors in the durability and reliability of a reed switch, no part damage, and no tank adjustments required
- Durable Material: The fuel sending unit is made of heavy duty 316 stainless steel, which is reliable and durable, anti-vibration, explosion-proof, can read data accurately, and can maintain excellent performance in various environments
- Wide Range of Application: The fuel gauge sending unit is widely used in boat, truck, bus and marine fields, and can support marine and automotive fuel level gauges and water level gauges
- Simple Installation: The package comes with mounting screws, washers, just remove the old gas tank fuel sender and install the new one, the water level sensor is a standard SAE 5 hole mounting pattern, and the installation takes about 15 minutes in total, you can let the fuel gauge work again, the red wire is positive and the blue wire is negative
- Please Note: In order to keep the fuel water level sensor from touching the bottom of the tank, if the tank is made of metal, the length of the sensor should be 0.5 inch less than the depth of the tank. If the tank is made of plastic, the length of the sensor should be 1inch less than the depth of the tank
- See more on Amazon...
Brand: TADYAO | Manufacturer: TADYAO
See On Amazon #10
Equus 9982 GM Fuel Level Sender
Asin: B000N54U30 | Model: 9982 | PartNumber: 9982 | Ean: 0047923099827 | UPC: 047923099827
Ensures Long Lasting Durability.
Facilitate Hassle Free Installation.
Made From High Quality Material.
Features
- Designed to convey information about the engine to the gauge
- Made from high quality material
- Ensures long lasting durability
- Facilitate hassle free installation
- See more on Amazon...
Brand: EQUUS | Manufacturer: INNOVA
Dimensions: 2.90 x 16.70 x 3.20 Inches | Weight: 0.65 pounds
Warranty: 1 year limited
See On Amazon #11
Sucicago Boat Fuel Tank Sending Unit 240-33 ohms 10"(250mm) Fuel Sender Gauge Diesel Fuel Water Level Sensor
Asin: B09XVG2FHK | Ean: 0743645078712 | UPC: 743645078712
［Easily Understood Wiring Instructions］］This Sucicago Fuel Sender Comes With 1Pc Of Nbr Mounting Gasket, 5Pcs Of Metric Screw And Installation Instruction. Install It With Ease! You Will Know How Much Fuel, Diesel,Gasoline Or Water Left On Your Boat/Truck/Camper! Signal Output: 240-33Ohms, Non-Linear Output, Sae 5 Hole Mounting Pattern ( Not Equidistant )
.
［Really Important To Know Before You Order］
1) To Allow The Sender Not Hit The Bottom Of The Tank, The Length Of Sender Should Be 1" Less Than The Depth Of The Tank If Tank Is Plastic, And 0.5" Less Than The Depth Of The Tank If Tank Is Metal .
2)The Diameter Of Float Is 1.38"(35Mm). If You Have To Drill The Hole, Diameter 1.50"(38Mm) Hole Would Be Perfect..
［Body Material］ Stainless Steel. Sucicago Guarantees With 1 Year Limited Warranty & Free Lifetime Technical Support..
［Update Version］We Received Feedback From Customers Who Said The Smaller Sending Units As A Short Tank Requires Higher Sensitivity Than The Taller Tanks Do. Our R&D Has Redesigned :
10Mm Resolution Range : 4”,5”,6”,7”
21Mm Resolution Range: 8”,9”,10”,11”,12”,13”
.
Features
- A Direct Replacement Sending Unit Sucicago Reed Switch Diesel Fuel Water Level Sensor is a Better Option Than the Traditional Lever Type Sensors. The Boat Fuel Tank Will not Effected by The Constant Movement Caused by Waves and Boat Rocking. It Will give an Accurate Indication of Fuel Level and the Fuel Gauge No Longer Bounces All Over The Place In Windy Wave Situations.
- Update Version We Received Feedback From Customers Who Said the Smaller Sending Units As A Short Tank Requires Higher Sensitivity Than The Taller Tanks Do. Our R&D Has Redesigned :
10mm Resolution Range : 4 ,5 ,6 ,7
21mm Resolution Range: 8 ,9 ,10 ,11 ,12 ,13
- Easily Understood Wiring Instructions This Sucicago Fuel Sender Comes With 1pc of NBR Mounting Gasket, 5pcs of Metric Screw and Installation Instruction. Install It With Ease! You will know how much Fuel, Diesel,Gasoline or Water left on Your boat/Truck/Camper! Signal Output: 240-33ohms, Non-Linear Output, SAE 5 Hole Mounting Pattern ( NOT Equidistant )
- Body Material Stainless Steel. Sucicago Guarantees with 1 Year Limited Warranty & Free Lifetime Technical Support.
- Really Important to Know BEFORE You Order
1) To Allow The Sender not Hit The Bottom of The Tank, The Length of Sender Should be 1 less Than The Depth of The Tank If Tank Is Plastic, And 0.5 Less Than The Depth of The Tank If Tank is Metal .
2)The Diameter of Float is 1.38(35mm). If You Have to Drill the hole, Diameter 1.50(38mm) Hole Would be Perfect. - See more on Amazon...
Brand: Sucicago | Manufacturer: Sucicago direct
See On Amazon #12
16" 240-33 ohms Boat Fuel Lever Sending Unit Marine Fuel Gas Tank Level Sender Marine Fuel Level Gauge Sensor Fuel Sending Unit (400mm) for Fuel Gauge & Water Lever Gauge Water Tank Sender
Asin: B07P7PYDTC | Ean: 0602318075987 | UPC: 602318075987
◼【Multiple Sizes】The Length Range Is 150Mm, 175Mm, 200Mm, 225Mm, 250Mm, 275Mm, 300Mm, 325Mm, 350Mm, 375Mm, 400Mm, 425Mm, 450Mm And 500Mm. Boat Fuel Sending Unit Output Signal: 240-33Ohm. (240 Ohms At Empty, 33 Ohms At Full). Support 240~33 Ohm Fuel Level Gauge And Water Level Gauge .(Please Choose One Length Range & Signal You Need When Placing The Order )..
◼【Package Includes】The Fuel Level Sender Comes With Gasket And Mounting Screws. Wiring Instructions Are Simple And Easy To Follow.Fuel Sending Unit Has 1 Year Factory Warranty, Every Products Needs To Go Through Strict Quality Inspection Before Leaving The Factory, If You Have Any Questions About The Product, Please Feel Free To Contact Us..
✔【Easy Installation】The Water Level Gauge Sensor Is A Standard Sae 5-Hole Type, Easy To Install And Connect.Blue Wire Is Connected To Ground (-), Brown Wire Is Connected To The Gauge Signal Wire.Operational Temperature: -40°C -+85°C. Stable Output Signal, Universal Style, Suitable For All Kinds Of Material Tanks..
✔【High Quality】Fule Tank Sending Unit Is Made Of Heavy Duty Sus316 Stainless Steel And Rugged Construction.It Is The Direct Replacement For Arm Type Sender. The Advantages Of Fuel Level Sensor Are Accurate Measurement, Long Service Life, Good Shock Resistance And Corrosion Resistance,Keep You Safe..
Features
- Wide Application The fuel sending unit is suitable for automobiles, ships, speedboats, engines, generator sets, engineering machinery, agricultural machinery, modified vehicles and other fields, and without limitation of environment.
- High Quality Fule Tank Sending Unit is made of heavy duty SUS316 Stainless Steel and rugged construction.It is the Direct Replacement for Arm Type sender. The advantages of fuel level sensor are accurate measurement, long service life, good shock resistance and corrosion resistance,keep you safe.
- Multiple Sizes The length range is 150MM, 175MM, 200MM, 225MM, 250MM, 275MM, 300MM, 325MM, 350MM, 375MM, 400MM, 425MM, 450MM and 500MM. Boat fuel sending unit Output signal: 240-33ohm. (240 ohms at empty, 33 ohms at full). Support 240~33 ohm Fuel Level Gauge and Water Level Gauge .(PLEASE choose one length range & signal you need when placing the order ).
- Easy Installation The water level gauge sensor is a Standard SAE 5-hole type, Easy to install and connect.Blue wire is connected to ground (-), Brown wire is connected to the gauge signal wire.Operational Temperature: -40 C -+85 C. Stable output signal, universal style, suitable for all kinds of material tanks.
- Package Includes The fuel level sender comes with gasket and mounting screws. Wiring instructions are simple and easy to follow.Fuel sending unit has 1 year factory warranty, every products needs to go through strict quality inspection before leaving the factory, if you have any questions about the product, please feel free to contact us.
- See more on Amazon...
Brand: Geloo | Manufacturer: Hot car parts
Dimensions: 2.50 x 17.80 x 4.30 inches | Weight: 0.85 pounds
See On Amazon #13
240-33ohm 7"(180mm) Boat Fuel Tank Sending Unit, Fuel Sending Unit for Marine Car RV Truck Vehicle, Stainless Steel Fuel Tank Sender with 10mm High Precision Sensor, Waterproof Gas Fuel Level Sensor
Asin: B0C2V9TWTD
High Quality Material: The Fuel Sending Unit Is Made Of High-Quality 316 Stainless Steel Material Externally, Interior Is Controlled By High-Quality Reed Switch, Which Is Sturdy And Durable, Oxidation Resistance, Rust Resistance, Corrosion Resistance, Longer Service Life Than Ordinary Materials, Safe And Reliable Quality, You Can Use It With Confidence.
Wide Application & Easy To Install: 1 X 7 Inch/180Mm Marine Fuel Sending Unit, 1 X 2Mm Nbr Gasket, 5 X M5 Screws, Sae 5-Hole Installation, Easy To Install And Use, Widely Used In Automotive, Rv, Boat, Generator, Yacht, Agricultural And Industrial Vehicles, Etc, It Is Suitable For Gas, Water, Diesel.
Stable Signal: Length: 7 Inch/180Mm, The Boat Gas Tank Gauge Sensor Is Only Suitable For 240-33 Ohms Fuel Gauge, It Can Output A Good Signal, Fast And Accurate Measurement Of Fuel Level, Very Practical And Convenient, Optimal Operating Temperature Is -40 ℃ -85 ℃.
Ip67 Waterproof: Boat Gas Tank Gauge Sensor With Super Strong Ip67 Grade Waterproof Ability, Excellent Sealing Performance, Can Effectively Prevent Water And Dust From Entering The Interior, And Protect Water Level Sensor.
Features
- 10mm High Precision Sensor: Length: 7 inch, water fuel sender equipped with 10mm high-precision sensor, high resolution, higher sensitivity, and more accurate measurement, stable output signal, even in wind and waves conditions, it can accurately indicate the fuel level
- IP67 Waterproof: Boat gas tank gauge sensor with super strong IP67 grade waterproof ability, excellent sealing performance, can effectively prevent water and dust from entering the interior, and protect water level sensor
- High Quality Material: The fuel sending unit is made of high-quality 316 stainless steel material externally, interior is controlled by high-quality reed switch, which is sturdy and durable, oxidation resistance, rust resistance, corrosion resistance, longer service life than ordinary materials, safe and reliable quality, you can use it with confidence
- Stable Signal: Length: 7 Inch/180mm, The boat gas tank gauge sensor is only suitable for 240-33 ohms fuel gauge, it can output a good signal, fast and accurate measurement of fuel level, very practical and convenient, optimal operating temperature is -40 -85
- Wide Application & Easy to Install: 1 x 7 Inch/180mm Marine Fuel Sending Unit, 1 x 2mm NBR Gasket, 5 x M5 Screws, SAE 5-hole installation, easy to install and use, widely used in automotive, RV, boat, generator, yacht, agricultural and industrial vehicles, etc, it is suitable for gas, water, diesel
- See more on Amazon...
Brand: OCHIKI | Manufacturer: OCHIKI
See On Amazon #14
AODITECK 240-33 ohms 7"(180mm) Fuel Sending Unit Marine for Boat Car Fuel Tank Sender Fuel Water Level Sensor Marine Gas Water Tank Sensor Fuel Gauge Sending Unit Truck Marine Gas Water Tank Sender
Asin: B08RBN82D4 | Model: 7C5-U180C | PartNumber: 7C5-U180C | Ean: 0750081816334 | UPC: 750081816334
［Finer Resolution］As The Short Tanks Requires Higher Sensitivity Than The Taller Tanks Do.
Aoditeck: Resolution Of 7" Fuel Sending Unit Is10mm.
Others : Resolution Of 7" Fuel Sending Unit Of Some Companies They Offered Is 21Mm..
［Easy To Install, Easy Hookup! ］ The Aoditeck Fuel Level Sending Unit Comes With Gasket,Mounting Screws,Well-Written And Illustrated Instructions; The Wiring Instructions Are Straight Forward And Easy To Follow. Takes About 15 Minutes To Install Total, Getting Your Fuel Gauge Working Again.
.
［Note］: ① To Allow The Sender Not Hit The Bottom Of The Tank, The Length Of Sender Should Be 1" Less Than The Depth Of The Tank If Tank Is Plastic, And 0.5" Less Than The Depth Of The Tank If Tank Is Metal .
②The Diameter Of Float Is 1.38"(35Mm). If You Have To Drill The Hole, Diameter 1-1/2"(38Mm) Hole Would Be Perfect.
③Aoditeck Sender Is With Non-Linear Output, It Can Only Match With Standard Gauge With Non-Linear Signal.
.
［More Reliable And Quality Construction］All The Aoditeck Fuel Sending Units Are Made With Series Of Highquality Reed Switches And Fixed Resistors. Sae 5 Hole Mounting Pattern, Heavy Duty Sus 316 Stainless Steel And Rugged Construction. Signal Output: 240 Ohms-33 Ohms.
.
［Aoditeck Fuel Gauge］: You Can Purchase An Aoditeck Fuel Level Gauge In Conjunction With An Aoditeck Sending Unit If Your Boat/Camper Didn’T Have A Fuel Gauge, Both Will Work Great Together.
There Are Several Series Gauge Models At Option.
.
Features
- Great replacement fuel sender The advantage of This doughnut float design type level sender over thick-film swim arm type level Sender is the reed switch's durability and reliability.
Additionally, no moving parts to break. No adjustment needed for tank. It could support fuel level gauge and water Tank Gauge for Boat/RV/Truck.
- AODITECK Fuel Gauge : You can purchase an AODITECK fuel level gauge in conjunction with an AODITECK sending unit If your boat/camper didn t have a fuel gauge, Both Will Work Great Together.
There are several series gauge models at option.
- Finer resolution As the Short Tanks requires higher sensitivity than the taller tanks Do.
AODITECK: Resolution of 7 Fuel Sending Unit is10mm.
Others : Resolution of 7 Fuel Sending Unit of some companies they offered is 21mm. - More Reliable and Quality Construction All the AODITECK Fuel Sending Units are made With series of Highquality reed switches and fixed resistors. SAE 5 hole mounting pattern, heavy duty SUS 316 stainless steel and rugged construction. Signal Output: 240 ohms-33 ohms.
- Easy to Install, Easy Hookup! The AODITECK Fuel Level sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow. Takes about 15 minutes to install total, getting your fuel gauge working again.
- Note : to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
The Diameter of Float is 1.38(35mm). If You Have to Drill the hole, Diameter 1-1/2(38mm) Hole Would be Perfect.
AODITECK Sender is with Non-Linear Output, It can only match with standard gauge with Non-Linear signal.
- See more on Amazon...
Brand: AODITECK | Manufacturer: Aoditeck Direct
See On Amazon #15
ARTILAURA Fuel Sending Unit and Gauge Kit Boat Marine Fuel Sender, 240-33ohms 16" (400mm) Fuel Tank Sender Stainless Steel Gas Sensor for Boat Car Truck Vehicle
Asin: B0B9XGCN6Z
🧭【Fuel Gauge】The Marine Fuel Gauge Diameter Is 2-1/16 Inch (52Mm). The Boat Fuel Gauge Is Made Of 316L Metal, Rubber And Plastic. Scratch Resistant Curved Glass Lenses. 7 Color Backlight : Red、Green、Blue、Yellow、Olivine、Orange、Purple..
⭐⭐⭐⭐⭐[Attention]: 1 Inch(25Mm) Clearance Must Be Maintained Between The Tank Bottom And The Float Retaining Collar In Addition To Adjacent Side Or Baffle Of Tank. Please Contact Us If You Are Dissatisfied With Our Products, The Response Will Be Taken In 34 Hours And Provide Proper Solutions..
🚌[Easy To Install]: Sae 5 Hole Mounting Pattern, Easy To Install And Hookup. The Well-Written And Illustrated Instructions Are Straight Forward That Will Easy To Follow. The Package Comes With 1X Fuel Gauge, 1 X Fuel Sensor, 1 X Gasket, 5 X Screws And 1 X Instructions..
🚙[American Standard Output]: Length Range Of Fuel Tank Sender To Choose: 5 Inch-16Inch. The Fule/Water Level Sensor With American Standard Output 240-33 Ohms (240 Ohms At Empty, 33 Ohms At Full)..
Features
- [Fuel Sender Material]: Fuel sending unit is made with heavy duty stainless steel. This water level sensor is reed switch, durability and reliability, steady output signal. No adjustment needed for tank. The fuel level sender is suitable for Boat, Auto,Trucks, Buses and Marine field.
- [American Standard Output]: Length range of fuel tank sender to choose: 5 inch-16inch. The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full).
- Fuel Gauge The marine fuel gauge diameter is 2-1/16 inch (52mm). The boat fuel gauge is made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. 7 color backlight : red green blue yellow olivine orange purple.
- [Easy to Install]: SAE 5 hole mounting pattern, easy to install and hookup. The well-written and illustrated instructions are straight forward that will easy to follow. The package comes with 1x Fuel Gauge, 1 x Fuel Sensor, 1 x Gasket, 5 x Screws and 1 x instructions.
- [Attention]: 1 inch(25mm) clearance must be maintained between the tank bottom and the float retaining collar in addition to adjacent side or baffle of tank. Please contact us if you are dissatisfied with our products, the response will be taken in 34 hours and provide proper solutions.
- See more on Amazon...
Brand: ARTILAURA | Manufacturer: ARTILAURA
Dimensions: 0.71 x 16.00 x 0.71 Inches | Weight: 0.62 pounds
See On Amazon #16
10" 0-90 ohms Fuel Sender Unit Boat Fuel Tank Sending Unit Marine Fuel Level Gauge Sensor 250mm Stainless Steel Fuel Tank Sender for Fuel Level Gauges Water Level Gauges
Asin: B0C2Q1YVQZ
High Quality Material: The Boat Fuel Tank Sending Unit Sending Device Is Made Of Heavy-Duty 316 Stainless Steel, Which Is Sturdy And Durable. The Water Level Sensor Is A Reed Switch, With Stable Signal Output And Long Service Life.
Packaging: 1 X Sensor, 1 X Gasket, 5 X Screws, 1X Instruction Manual. If You Have Any Questions, Please Feel Free To Leave Us A Message And We Will Reply To You Within 12 Hours.
Easy To Install: The 0-90 Ohms Fuel Sender Unit Is An Sae 5-Hole Installation Method That Is Convenient And Simple To Install, Saving You Time.
Parameter: Fuel/Water Level Sensor Output: 0-90 Ohms(0 Ohms At Empty, 90 Ohms At Full). Length Range Of Fuel Sender: 5 Inches To 12 Inches.
Features
- Fitment: Fuel sender unit can be used for ships, cars, trucks, buses, etc. Suitable for fuel level and water level gauges
- Parameter: Fuel/water level sensor output: 0-90 ohms(0 ohms at empty, 90 ohms at full). Length range of fuel sender: 5 inches to 12 inches
- High Quality Material: The boat fuel tank sending unit sending device is made of heavy-duty 316 stainless steel, which is sturdy and durable. The water level sensor is a reed switch, with stable signal output and long service life
- Easy to Install: The 0-90 ohms fuel sender unit is an SAE 5-hole installation method that is convenient and simple to install, saving you time
- Packaging: 1 x sensor, 1 x gasket, 5 x screws, 1x instruction manual. If you have any questions, please feel free to leave us a message and we will reply to you within 12 hours
- See more on Amazon...
Brand: QLZOZB | Manufacturer: QLZOZB
Dimensions: 3.14 x 13.18 x 2.95 Inches | Weight: 0.70 pounds
See On Amazon #17
Fuel Level Sender Sending Unit, GM Type, 0(E)-90(F) ohms, 6 - 24 Adjustable (F-90)
Asin: B079JFPGLB | Ean: 0714801052600 | UPC: 714801052600
Standard Vdo 5-Hole Mounting Pattern..
Mounting Screws Are Not Included..
Holes Dia. 2.2" (54Mm) Plate Diameter: 2.75" (70Mm)..
6”- 24” Height And Swing Arm Adjustable..
Features
- Fuel Level Sender, 0(E)-90(F) ohms
- 6 - 24 height and swing arm adjustable.
- Standard VDO 5-hole mounting pattern.
- Holes dia. 2.2 (54mm) plate diameter: 2.75 (70mm).
- Mounting screws are not included.
- See more on Amazon...
Brand: IIL | Manufacturer: IIL
See On Amazon #18
Dorman 692-243 Fuel Tank Sending Unit Compatible with Select Models
Asin: B00NF1RRC0 | Model: 692-243 | PartNumber: 692-243 | Ean: 0037495392235 | UPC: 037495392235
Durable Construction - This Part Is Made From Quality Materials To Ensure Reliable Performance And Long Service Life.
Ensure Fit - To Make Sure This Part Fits Your Exact Vehicle, Input Your Make, Model And Trim Level Into The Garage Tool.
Trustworthy Quality - Backed By Team Of Product Experts In The United States And More Than A Century Of Automotive Experience.
Restores Functionality - Reliable Replacement For An Original Part That Has Failed Due To Internal Sensor Failure.
Features
- Direct replacement - this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
- Restores functionality - reliable replacement for an original part that has failed due to internal sensor failure
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- See more on Amazon...
Brand: Dorman | Manufacturer: Dorman Products
Dimensions: 5.80 x 13.30 x 5.50 inches | Weight: 1.32 Pounds
Warranty: Limited Lifetime
See On Amazon #19
MOTOR METER RACING Swing Arm Type Universal Fuel Level Sender Float 10-180 ohms Suitable for Depth 5"-27" Adjustable
Asin: B07D3SGKSP | Model: IG-NO.94-10180 | PartNumber: IG-NO.94-10180 | Ean: 4712968073571
Mounting Method: 5 Hole Mounting Pattern, Durable Steel & Plastic Construction..
One Year Limited Warranty For Non-Human Factor Damage & Free Lifetime Technical Support..
Included Mounting Gasket Kit & Installation Instructions..
Adjustable For 5" - 27" (127 Mm - 685.8 Mm) Depth Of Tank..
Features
- Resistance Specifications: Empty - 10 ohms, Full - 180 ohms.
- Adjustable For 5 - 27 (127 mm - 685.8 mm) Depth of Tank.
- Mounting Method: 5 Hole Mounting Pattern, Durable Steel & Plastic Construction.
- Included Mounting Gasket Kit & Installation Instructions.
- One Year Limited Warranty For Non-Human Factor Damage & Free Lifetime Technical Support.
- See more on Amazon...
Brand: MOTOR METER RACING | Manufacturer: I GAUGE TECHNOLOGY CO., LTD
See On Amazon
Looking For Something Else?
Search