Genmitsu CNC Machine 4040-PRO & Compatible 69mm Spindle Holder
Asin: B0BVB1CMJH
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Still Based On Open-Source Grbl V1.1, The 4040-Pro Cnc Router Has Stepped Up To More Powerful But Silent Toshiba Tb6s109 Drivers With 32-Bit Chips. Upgrades Include Extended Function Ports Like A Dedicated 3 Pin Laser Port, Air Assistance Pump Port, And Mpg Port..
The 69Mm Spindle Holder Is Made Of Precision Machined Aluminum For Better Rigidity And Durability. Step Up Your 4040-Pro With A More Powerful Router And This 69Mm Spindle Mount..
All Main Parts Are Pre-Assembled And It Just Takes About 15 Minutes To Finish The Whole Machine Assembly. The Spoilboard Is Combined By Two Pieces Of Mdf Boards. Each Mdf Board Could Be Replaced Individually. You Don’T Need To Replace The Whole Spoilboard When A Panel Gets Damaged..
New Steel Hss Frame - All New Redesigned Frame Structure, Each Axis Is Composed Of Two 16Mm Steel Hss Linear Tubes And A Lead Screw Motion Drive, Dual Y Axis Rails, And All Metal Frame. This New High-Rigidity Structure Ensures The Stability And Accuracy Of The Cnc Machine..
Features
- An effective working area of 15.7 x 15.7 x 3.1 is large enough for most daily CNC projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height.
- New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine.
- Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port.
- All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don t need to replace the whole spoilboard when a panel gets damaged.
- The 69mm spindle holder is made of precision machined aluminum for better rigidity and durability. Step up your 4040-PRO with a more powerful router and this 69mm spindle mount.
- See more on Amazon...
Brand: Genmitsu
See On Amazon Similar To Genmitsu CNC Machine 4040PRO
#1
Genmitsu 65mm & 69mm CNC Dust Shoe, Compatible with Most 65mm/69mm Spindle Motor and Compact Router, Hose Adapter Inner Diameter 38mm (1.5 ), Transparent
Asin: B0CKZ7NTQK | Model: DS69 | PartNumber: DS69 | Ean: 0816550027943 | UPC: 816550027943
Tidy Planting Brush: The Planting Brush Used In This Dust Shoe Is Neater And Firmer Compared To Glued Alternatives. This Contributes To Effective Dust Collection And Sweeping..
Split Design: The Dust Shoe's Integrated Split Design Makes It Easy To Replace Cutting Bits And Worn Brushes. Thanks To Two Magnets And Three Supports, It Has A Stable Structure That Prevents Displacement During Use, Offering A More Secure Experience Than Other Dust Shoes..
2-Step Assembly: Simply Insert The Top Cover Into The Router, Align The Magnets On The Bottom Cover To The Top, And You're Done. This Simple Assembly Process Ensures That You Can Start Using It Without Hassle..
Durable & Effective: The Dust Shoe Is Constructed From High-Quality And Durable Abs Material. Its Transparent Design Allows You To Keep An Eye On Your Operations..
Features
- Universal Compatibility: The innovative gasket design allows seamless adaptation to 65mm or 69mm CNC spindle motors or compact router. It's a perfect fit for the Genmitsu PROVerXL Series, 4040-PRO, 3020-PRO MAX V2 and 3030-PROVer MAX CNC machines that support adding the 65mm/69mm trimmer router.
- Durable & Effective: The dust shoe is constructed from high-quality and durable ABS material. Its transparent design allows you to keep an eye on your operations.
- Tidy Planting Brush: The planting brush used in this dust shoe is neater and firmer compared to glued alternatives. This contributes to effective dust collection and sweeping.
- 2-step Assembly: Simply insert the top cover into the router, align the magnets on the bottom cover to the top, and you're done. This simple assembly process ensures that you can start using it without hassle.
- Split Design: The dust shoe's integrated split design makes it easy to replace cutting bits and worn brushes. Thanks to two magnets and three supports, it has a stable structure that prevents displacement during use, offering a more secure experience than other dust shoes.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 4.96 x 8.27 x 6.46 Inches
See On Amazon #2
Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm
Asin: B07P6K9BL3 | Ean: 0816550021620 | UPC: 816550021620
Controller Software: The Genmitsu 3018-Pro Uses Grbl, A High-Performance Open-Source Software For Controlling Movement, And Runs On Arduino. Its Dependability And Simplicity Make Grbl An Industry Standard, So There’S No Lack Of Support And Resources Available When You Get Stuck..
Note: Assembly Instructions And User Guide Are Provided, Please Find At The Product Guides And Documents Section Below And Get Everything You Might Need. If You Get Stuck, Check Out The Sainsmart Resource Center (See At User Guide) Or Contact Us With Any Questions That Arise..
Optional Upgraded Parts: Super Size Your 3018 Cnc To A 3040 By Getting A Genmitsu 3040 Y-Axis Extension Kit. The 3040 Aluminum Spoilboard And 3040 Mdf Spoilboard For This Extension Kit Are Also Available To Buy..
Upgraded Power Adapter: Ul Approved And Out-Of-The-Box Support For The Drop In 20,000Rpm Spindle, No Need To Modify G-Code To Ramp Up To Full Speed..
Features
- New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. The base height is raised to 4cm for better stability. Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVC, and PCB, the Genmitsu can be used on a wide range of projects and materials.
- Upgraded Power Adapter: UL Approved and out-of-the-box support for the drop in 20,000rpm Spindle, no need to modify G-code to ramp up to full speed.
- Controller Software: The Genmitsu 3018-PRO uses Grbl, a high-performance open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make GRBL an industry standard, so there s no lack of support and resources available when you get stuck.
- Optional Upgraded Parts: Super Size your 3018 CNC to a 3040 by getting a Genmitsu 3040 Y-Axis Extension Kit. The 3040 Aluminum Spoilboard and 3040 MDF Spoilboard for this extension kit are also available to buy.
- Note: Assembly Instructions and User Guide are provided, please find at the Product Guides and Documents Section below and get everything you might need. If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: SainSmart
Dimensions: 11.81 x 7.09 x 0.01 inches | Weight: 15.19 Pounds
See On Amazon #3
Genmitsu CNC Router Machine 4040-PRO for Woodworking Metal Acrylic Cutting Milling, GRBL Control, Lead Screw Driven, 3 Axis CNC Engraving Machine, Working Area 400 x 400 x 78mm (15.7 x 15.7 x 3.1 )
Asin: B0BKSJJS34 | Model: 4040-PRO | PartNumber: 4040-PRO | Ean: 0816550026243 | UPC: 816550026243
Still Based On Open-Source Grbl V1.1, The 4040-Pro Cnc Router Has Stepped Up To More Powerful But Silent Toshiba Tb6s109 Drivers With 32-Bit Chips. Upgrades Include Extended Function Ports Like A Air Assistance Pump Port, And Mpg Port..
The 4040-Pro Cnc Machine Is Supplied With 42Mm And 52Mm Spindle Mounts. The Additional 65Mm (B0brzsy475), 69Mm (B0brzsvvk3) Spindle Mount, And Other Upgraded Accessories Are Available To Order. You Can Easily Upgrade The Machine According To Your Needs. If You Get Stuck, Check Out The Sainsmart Resource Centre (See User Guide) Or Contact Us With Any Questions You May Have..
It Supports Adding The 4Th-Axis Rotary Module Kit. The 4Th-Axis Kit Enables Your 4040-Pro Desktop Cnc To Carve From Different Angles And Positions Or With The Right Software Full 3D Rotary Caving..
All Main Parts Are Pre-Assembled And It Just Takes About 15 Minutes To Finish The Whole Machine Assembly. The Spoilboard Is Combined By Two Pieces Of Mdf Boards. Each Mdf Board Could Be Replaced Individually. You Don’T Need To Replace The Whole Spoilboard When A Panel Gets Damaged..
New Steel Hss Frame - All New Redesigned Frame Structure, Each Axis Is Composed Of Two 16Mm Steel Hss Linear Tubes And A Lead Screw Motion Drive, Dual Y Axis Rails, And All Metal Frame. This New High-Rigidity Structure Ensures The Stability And Accuracy Of The Milling Machine..
Features
- An effective working area of 15.7 x 15.7 x 3.1 is large enough for most daily wood carving projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height.
- New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the milling machine.
- Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a Air Assistance Pump Port, and MPG Port.
- All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don t need to replace the whole spoilboard when a panel gets damaged.
- The 4040-PRO CNC machine is supplied with 42mm and 52mm spindle mounts. The additional 65mm (B0BRZSY475), 69mm (B0BRZSVVK3) spindle mount, and other upgraded accessories are available to order. You can easily upgrade the machine according to your needs. If you get stuck, check out the SainSmart Resource Centre (see User Guide) or contact us with any questions you may have.
- It supports adding the 4th-axis rotary module kit. The 4th-axis kit enables your 4040-PRO desktop CNC to carve from different angles and positions or with the right software full 3D rotary caving.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #4
Genmitsu GS-775M 20000RPM 775 CNC Spindle Motor with 5mm ER11 Collet Set, CNC 3018 Upgraded Accessories, DC 24V, High Power, Noise Suppression, Electrical DC Motor for 3018 CNC Router Machine
Asin: B08DTHDSMV | Model: MR775 | PartNumber: MR775 | Ean: 0816550023723 | UPC: 816550023723
Pre-Installed Motor Noise Suppression Pcb Provides Enhanced Performance..
Double Ball Bearing Brush. Cw/Ccw Rotation..
It's Compatible With All 3018 Series Cnc Router. Applied To Lathes, Mills, Car Hoists, Pumps & Conveyors, Etc..
Experience A Quick And Easy Upgrade For Your Genmitsu Desktop Cnc..
Features
- DC: 24V. Speed: 20000/min.
- Experience a quick and easy upgrade for your Genmitsu Desktop CNC.
- Pre-installed motor noise suppression PCB provides enhanced performance.
- It's compatible with All 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc.
- Double ball bearing brush. CW/CCW rotation.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 1.03 Pounds
See On Amazon #5
Genmitsu CNC Dust Shoe ABS Cover Cleaner for 3018 Series CNC Router/CNC Machines with a 42mm Diameter Motor, Hose Adapter Outer Diameter 38mm (1.5 ), Transparent
Asin: B09CSYLZ36 | Model: DS3018 | PartNumber: DS3018 | Ean: 0816550024881 | UPC: 816550024881
Two-Piece Magnetic Design: Durable, Light And Flexible, Convenient For Daily Use And Maintenance. Easy To Assemble And Install. Only Take 3 Steps To Finish The Installation..
The Planting Brush Is Much Tidy And Firmer Than Other Glued Ones. You Could Just Replace The Whole Bottom Cover When The Brush Is Worn. Don’T Need To Spend Much Time Removing And Adding A New Brush (If The Brush Is Too Long For Your Bits, We Suggest That You Could Trim It Off From The Bottom According To The Bits Length Or Order A Replacement Base Bottom Cover With 20Mm Long Nylon Brush)..
The Split Design Makes It Much Easier To Replace Bits. You Only Need To Pop Off The Bottom Cover When Replacing Your Bits, No Tools Required , And Avoid Other Complicated Procedures..
This Dust Shoe Is Made Of High-Quality Transparent Abs . The Transparent Design Helps You Keep An Eye On Your Operations. Equipped With A 40Mm Long Nylon Brush To Maximize Vacuum Suction And Help Act As A Dust Sweep With High Dust Removal Efficiency. Keep Your Machine And Work Area Clean While Cutting, Drilling, And Carving..
Features
- Compatible with Genmitsu 4040-PRO and most 3018 series CNC machines on the market, including 3018-PRO, 3018-PROVer, 3018-PROVer Mach3 and 3018-MX3. Just make sure that your spindle diameter is 42mm (1.65 ) and with two 4mm (0.16 ) screw holes.
- This dust shoe is made of high-quality transparent ABS . The transparent design helps you keep an eye on your operations. Equipped with a 40mm long nylon brush to maximize vacuum suction and help act as a dust sweep with high dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
- Two-Piece Magnetic Design: Durable, light and flexible, convenient for daily use and maintenance. Easy to assemble and install. Only take 3 steps to finish the installation.
- The split design makes it much easier to replace bits. You only need to pop off the bottom cover when replacing your bits, no tools required , and avoid other complicated procedures.
- The planting brush is much tidy and firmer than other glued ones. You could just replace the whole bottom cover when the brush is worn. Don t need to spend much time removing and adding a new brush (If the brush is too long for your bits, we suggest that you could trim it off from the bottom according to the bits length or order a Replacement Base Bottom Cover with 20mm long nylon brush).
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #6
Genmitsu 65mm Diameter Aluminum CNC Spindle Holder Spindle Mount for 3018-PRO, 4040-PRO, 4040 Reno, 3020-PRO MAX V2, 3030-PROVer MAX, 3018-PROVer V2 CNC Machine and Aluminum Z Axis Assembly V2 Kits
Asin: B0BRZSY475 | Model: ZC65 | PartNumber: ZC65 | Ean: 0816550026649 | UPC: 816550026649
Reliable Performance: Increased Stability And Less Operating Noise. Robust Mounting Screw Pattern Ensures Your Spindle Is Level At All Times..
Dimension: Outside Dimension: 88X91x36mm; Diameter: 65Mm.
Easy Installation: Quick Swap Of Just 4 Screws After Removing The Stock Carriage..
High Quality Materials: The Spindle Carriage Is Made Of Precision Machined Aluminum For Better Rigidity And Durability. High Strength And A Long Service Life..
Features
- Quick Upgrade: Designed for the PRO series including 3018-PRO, 4040-PRO, 3020-PRO MAX V2, 4040 Reno, and PROVer series including 3018-PROver V2, 3030-PROVer MAX CNC machine and Genmitsu Aluminum Z Axis Assembly V2 kits. Step up your CNC router with a more powerful router and this 65mm spindle mount.
- High Quality Materials: The spindle carriage is made of precision machined aluminum for better rigidity and durability. High strength and a long service life.
- Reliable Performance: Increased stability and less operating noise. Robust mounting screw pattern ensures your spindle is level at all times.
- Easy Installation: Quick swap of just 4 screws after removing the stock carriage.
- Dimension: Outside Dimension: 88x91x36mm; Diameter: 65mm
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #7
Genmitsu L8 Laser Engraver, 40000mm/min All-in-one Laser Engraving Machine, 20W Power Output Laser Cutter Built-in Acrylic Enclosure with Vent, Air Assist Pump, Honeycomb, Camera, Laser Safety Class 1
Asin: B0CMTL5QSJ | Model: L8W20 | PartNumber: L8W20 | Ean: 0816550028285 | UPC: 816550028285
Say Goodbye To Multiple Trials And Errors: Equipped With A Lightburn-Compatible Camera, Positioning Your Project Is A Breeze. Plus, With A Power Indicator Bar, Fault Reporting Light, And Airflow Detection, This Machine Puts You In Control..
Laser Safety Class 1 Certified: The Machine Incorporates A Door Sensor, Ensuring It Halts Operation When The Cover Is Open And Resumes Once Closed. Additionally, It Features A Tilted Automatic Stop, An Active Flame Monitor Buzzer, A Complete Array Of Position Protection Limit Switches, Emergency Stop, And A Child Safety Lock—Providing Comprehensive Safeguards For Your Secure Use Of This High-Power Machine..
Ready To Roll: The Genmitsu L8 Arrives Fully Assembled, Ready To Elevate Your Crafting. Its 360° Visual Angle Exhaust Acrylic Laser Shield Ensures Safety Without Compromise. Personalize Your Gear With Optional Accessories And Attachments Like A Smoke Purifier And Roller Rotaries For A Seamless Fit In Any Scenario..
More Than 20W Optical Power Output: Feel The Power Of The Genmitsu L8’S Ability To Cut Through Materials Like 12Mm Pinewood, 8Mm Black Acrylic, And Even 0.05Mm Stainless Steel In Just One Pass! With The Included 30L/Min Smart Air Assist Pump And Built-In Large Honeycomb, You Can Expect A Super Efficient And Clear Cut Every Time..
Features
- Maximum 40000mm/min Engraving Speed: Thanks to cutting-edge laser technology and an enhanced machine structure, this device achieves remarkable speed. Surpassing the speed limits of conventional frame machines, the L8 matches the pace of most compact Galvo laser etching machines, outperforming other desktop diode laser engraved machines on the market by up to 33%.
- More than 20W Optical Power Output: Feel the power of the Genmitsu L8 s ability to cut through materials like 12mm Pinewood, 8mm black acrylic, and even 0.05mm stainless steel in just one pass! With the included 30L/min smart air assist pump and built-in large honeycomb, you can expect a super efficient and clear cut every time.
- Say goodbye to multiple trials and errors: Equipped with a Lightburn-compatible camera, positioning your project is a breeze. Plus, with a power indicator bar, fault reporting light, and airflow detection, this machine puts you in control.
- Ready to Roll: The Genmitsu L8 arrives fully assembled, ready to elevate your crafting. Its 360 visual angle exhaust acrylic laser shield ensures safety without compromise. Personalize your gear with optional accessories and attachments like a smoke purifier and roller rotaries for a seamless fit in any scenario.
- Laser Safety Class 1 Certified: The machine incorporates a door sensor, ensuring it halts operation when the cover is open and resumes once closed. Additionally, it features a tilted automatic stop, an active flame monitor buzzer, a complete array of position protection limit switches, emergency stop, and a child safety lock providing comprehensive safeguards for your secure use of this high-power machine.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 10.28 x 28.15 x 24.45 inches
Warranty: 1-Year Warranty
See On Amazon #8
Genmitsu 4040 Reno CNC Router Milling Machine for Woodworking Acrylic Cutting, Belt Driven, Quieter Movement, Wood Metal Carving Cutter Engraver, Working Area 15.75 x 15.75 x 3
Asin: B0CT551BMC | Model: 4040RENO | PartNumber: 4040RENO | Ean: 0816550028780 | UPC: 816550028780
Sturdy Axis Structure For Stability: Say Goodbye To Wobbly Cuts With Our Redesigned Axis Structure. The Double Y-Axis Setup And Solid Xz Frame Provide Robust Support For Your Projects, Big Or Small. With A Two-Stage Z-Axis Design That Minimizes Movement, You Can Trust This Machine To Deliver Precise Results Every Time..
Easy Integration With Grbl For Arm32 1.1F: Seamlessly Connect To Your Favorite Cad/Cam Software With Our Grbl Integration. This Open-Source Technology Ensures Compatibility With Leading Programs And 4-Axis Interfaces, Making It Easy To Bring Your Designs To Life. Whether You're Carving Wood Or Making Signs, This Desktop Cnc Is Your Reliable Partner In Creativity..
Flexible Accessories For Endless Possibilities: Customize Your Machine To Suit Your Needs With Our Range Of Eco-Friendly Accessories. Easily Mount 42Mm & 52Mm Spindles And Explore Upgrade Options For 65Mm Or 69Mm Compatibility. From Spindles To Router Modules, There's No Limit To What You Can Create..
Smart Belt Design For Smooth Operation: Enjoy Smooth And Quiet Operation With Our Clever Belt System. It Ensures Precise Cuts With An Accuracy Of ±0.1Mm On The Xy Axis, Without The Hassle Of Constant Adjustments. Plus, We've Got You Covered With A Complete Set Of V-Cutting Bits To Tackle Most Jobs With Ease..
Features
- Simple Setup, Expanded Functionality: Get started quickly with the Genmitsu 4040 Reno's easy modular setup and tough metal build. It offers a good-sized workspace of 400 x 400 x 76mm, perfect for all kinds of woodworking projects. Whether you're a beginner or a DIY enthusiast, its solid aluminum parts and strong motor make it a reliable choice for your workshop.
- Smart Belt Design for Smooth Operation: Enjoy smooth and quiet operation with our clever belt system. It ensures precise cuts with an accuracy of 0.1mm on the XY axis, without the hassle of constant adjustments. Plus, we've got you covered with a complete set of V-cutting bits to tackle most jobs with ease.
- Sturdy Axis Structure for Stability: Say goodbye to wobbly cuts with our redesigned axis structure. The double Y-axis setup and solid XZ frame provide robust support for your projects, big or small. With a two-stage Z-axis design that minimizes movement, you can trust this machine to deliver precise results every time.
- Flexible Accessories for Endless Possibilities: Customize your machine to suit your needs with our range of eco-friendly accessories. Easily mount 42mm & 52mm spindles and explore upgrade options for 65mm or 69mm compatibility. From spindles to router modules, there's no limit to what you can create.
- Easy Integration with Grbl for ARM32 1.1f: Seamlessly connect to your favorite CAD/CAM software with our Grbl integration. This open-source technology ensures compatibility with leading programs and 4-axis interfaces, making it easy to bring your designs to life. Whether you're carving wood or making signs, this desktop CNC is your reliable partner in creativity.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 11.02 x 33.46 x 11.81 Inches
See On Amazon #9
Genmitsu CNC MDF Spoilboard Table for 3018 CNC Router Machine, 30 x 18 x 1.2cm (11-4/5''x 7''x 1/2''), M6 Holes (6mm), Screws and Nuts Included
Asin: B08LD1XG3F | Model: SP3018 | PartNumber: SP3018 | Ean: 0816550024010 | UPC: 816550024010
Compatibility: Perfectly Compatible With All 3018 Series Cnc Router Kits Except The 3018-Prover V2.
Application: Usually Used When Cutting Or Carving Wooden Materials. The Mdf Spoilboard Is Used As A Base To Cut On So That Your Cnc Table Is Not Damaged By The Cutting Tools. It Can Ensure The Stability Of The Cutting Material, Thereby Achieving More Precise Cutting.
Material: Mdf (Medium-Density Fibreboard). Mdf Is Very Dense Translating Into More Weight With Enhanced Strength And Durability. Size Is 30 X 18 X 1.2Cm (11-4/5''X 7''X 1/2'').
Features
- A spoilboard is a disposable workbench mounted above the router's table. It can protect the router table from damage as well as being an expendable surface that can participate in workholding.
- Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 18 x 1.2cm (11-4/5''x 7''x 1/2'')
- Compatibility: Perfectly compatible with ALL 3018 Series CNC Router Kits except the 3018-PROVer V2
- Application: Usually used when cutting or carving wooden materials. The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #10
Genmitsu GGW-UART Wireless Wi-Fi Module Kit, App G-Code Sending, Remote Control CNC Milling Machine Offline Controller for 3018-PRO, 3020-PRO Max V2, 3030-PROVer Max, 4040-PRO, 4040 Reno
Asin: B0D1BZW5LY | Model: UART | PartNumber: UART | Ean: 0816550029596 | UPC: 816550029596
Effortless G-Code Transmission: With Our Wifi Module And App, Downloading And Sharing G-Code Files Has Never Been Easier. Access Online G-Code Resources Or Share Files With Friends, Saving Them Directly To Your Phone And Wirelessly Sending Them To Your Cnc Machine For Seamless Execution. Notice: Support 2.4Ghz Wifi Only..
Simplified Cnc Operation: With Our Wifi Module, Effortlessly Control Your Cnc Machine Remotely Using Your Phone. Easily Navigate Through Projects And Outline Designs With Simplicity And Precision. This User-Friendly Solution Streamlines Your Workflow..
Monitor Multiple Cnc Machines Simultaneously: Setup A Workshop Cnc Farm And Monitor Remotely. Control And Monitor Multiple Machines All From One Interface From Anywhere!.
User-Friendly Design App: Easy To Set Up. Configure In Less Than 5 Minutes. Simplify Your Workflow And Work Area Running Your Desktop Cnc From Your Mobile Device. Expect Ongoing Support And New Features. (Note: It Does Not Support 5Ghz+2.4Ghz Dual-Band With The Same Ssid Name. You Will Need To Use Different Ssid Names For Your 2.4Ghz And 5Ghz Networks. It Does Not Support Wi-Fi 6. It Is Compatible With Wi-Fi Standards Up To Wi-Fi 5 (802.11Ac)).
Features
- Compatible module: Genmitsu 3018-PRO, 4040 Reno, 3020-PRO MAX, 3020-PRO MAX V2, 3030-PROVer MAX, 4040 Reno. Note: For the 4040-PRO Users, requires replacement parts for compatibility. Please contact customer service for support.
- User-Friendly Design App: Easy to set up. Configure in less than 5 minutes. Simplify your workflow and work area running your desktop CNC from your mobile device. Expect ongoing support and new features. (Note: It does not support 5Ghz+2.4Ghz dual-band with the same SSID name. You will need to use different SSID names for your 2.4Ghz and 5Ghz networks. It does not support Wi-Fi 6. It is compatible with Wi-Fi standards up to Wi-Fi 5 (802.11ac))
- Effortless G-Code Transmission: With our WiFi module and app, downloading and sharing G-code files has never been easier. Access online G-code resources or share files with friends, saving them directly to your phone and wirelessly sending them to your CNC machine for seamless execution. Notice: Support 2.4GHz wifi only.
- Monitor Multiple CNC Machines Simultaneously: Setup a workshop cnc farm and monitor remotely. Control and monitor multiple machines all from one interface from anywhere!
- Simplified CNC Operation: With our WiFi module, effortlessly control your CNC machine remotely using your phone. Easily navigate through projects and outline designs with simplicity and precision. This user-friendly solution streamlines your workflow.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 1.00 x 3.50 x 2.70 Inches
See On Amazon
Looking For Something Else?
Search