OSOYOO 3pcs Nano Atmega328P Module CH340 5V/16M USB-C Micro-Controller Board for Arduino Nano V3.0
Asin: B0BVR7G5X3 | Model: 2022014703 | PartNumber: 2022014703
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Osoyoo Nano Can Be Powered Via Usb-C Connection,Included Usb-C To Usb-A Cable And Usb-C To Usb-C Cable. 6-12V Unregulated External Power Supply , Or 5V Regulated External Power Supply.The Nano Is Automatically Sense And Switch To The Higher Potential Source Of Power, There Is No Need For The Power Select Jumper..
The Osoyoo Nano Has A Variety Of Facilities For Communicating With A Pc Or Other Microcontrollers, And Fully Compatible With Windows, Mac And Linux Operating System.This Board Especially Is Breadboard Friendly And Is Very Easy To Handle The Connections..
Osoyoo Nano Has 14 Digital I/O Pins (6 Of Which Can Be Used As Pwm Outputs), 6 Analog Inputs, A 16 Mhz Crystal Oscillator, A Power Usb-C Jack, An Icsp Port And A Reset Button..
Using Atmel Atmega328p-Au As Mcu, Support Isp Download; Support Usb Download And Power.Compatible With Arduino Nano V3.0 Fully Compatible With Windows, Mac And Linux Operating System..
Features
- OSOYOO Nano board is tiny and breadboard friendly microcontrollers based on the CH340/ATmega328. It works the same as original Nano and is very cost-effective for beginners to get started.
- Using Atmel Atmega328P-AU as MCU, Support ISP download; Support USB download and Power.Compatible with Arduino Nano V3.0 fully compatible with Windows, Mac and Linux operating system.
- The OSOYOO Nano can be powered via USB-C connection,included USB-C to USB-A cable and USB-C to USB-C cable. 6-12V unregulated external power supply , or 5V regulated external power supply.The Nano is automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.
- OSOYOO Nano has 14 digital I/O pins (6 of which can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a power USB-C jack, an ICSP port and a reset button.
- The OSOYOO Nano has a variety of facilities for communicating with a PC or other microcontrollers, and fully compatible with Windows, Mac and Linux operating system.This board especially is breadboard friendly and is very easy to handle the connections.
- See more on Amazon...
Brand: OSOYOO | Manufacturer: OSOYOO
Dimensions: 0.04 x 1.69 x 0.71 inches
Warranty: 3 months
See On Amazon Similar To OSOYOO 3pcs Nano Atmega328P Module
#1
ELEGOO UNO R3 Board ATmega328P with USB Cable(Arduino-Compatible) for Arduino
Asin: B01EWOE0UU | Model: EL-CB-001 | PartNumber: EL-CB-001 | Ean: 0719377200394, 0746591610715, 0753070352042 | UPC: 753070352042, 719377200394, 746591610715
Control Using Atmel Atmega+328P Chip(The Same With Arduino Uno R3).
We Have Always Cared About The Customer Experience And Improve The Product Function Details..
100% Compatible With The Arduino Ide And Rohs Compliant.
The Elegoo Uno R3 Board Now Uses An 16U2 Instead Of The Atmega8u2 Chip. Faster Transfer Rates And More Memory..
Features
- Clear prints on the female header connector, more precise and easier to use the wire.
- The ELEGOO UNO R3 BOARD now uses an 16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory.
- Control using ATMEL ATMEGA+328P chip(the same with Arduino UNO R3)
- 100% compatible with the Arduino IDE and RoHS Compliant
- We have always cared about the customer experience and improve the product function details.
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 0.39 x 3.15 x 2.36 inches | Weight: 0.06 pounds
See On Amazon #2
Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)
Asin: B07G99NNXL | Model: 8541582500 | PartNumber: 8541582500 | Ean: 0781520418697 | UPC: 781520418697
Works The Same As Original Nano, Runs Perfectly On Programming Software..
Lafvin Nano Ch340 Controller Is A Compact Board Similar To The R3 Board, Smaller And Breadboard-Friendly Than Diecimila..
Using Atmel Atmega328p-Au Mcu, Support Isp Download; Support Usb Download And Power..
Lafvin Nano V3.0 Card Is 100% Compatible With The Nano Card, And Fully Compatible With Windows, Mac And Linux Operating System..
Features
- Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.
- LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
- Works the same as original Nano, runs perfectly on programming software.
- Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
- LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.
- See more on Amazon...
Brand: LAFVIN | Manufacturer: LAFVIN
Weight: 0.01 pounds
See On Amazon #3
ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
Asin: B0713XK923 | Model: EL-CB-005 | PartNumber: EL-CB-005
Nano's Got The Breadboard-Ability Of The Boarduino And The Mini+Usb With Smaller Footprint Than Either, So Users Have More Breadboard Space. It's Got A Pin Layout That Works Well With The Mini Or The Basic Stamp (Tx, Rx, Atn, Gnd On One Top, Power And Ground On The Other)..
Learn Arduino Nano With Ease: Our Elegoo Nano Board Is The Perfect Choice For Beginners And Experts Alike, With Tutorials Available To Help You Get Started..
The Nano Can Be Powered Via The Mini-B Usb Connection, 7-12V Unregulated External Power Supply (Pin 30), Or 5V Regulated External Power Supply (Pin 27). The Power Source Is Automatically Selected To The Highest Voltage Source..
It Is A Smallest, Complete, And Breadboard Friendly Board. It Has Everything That Diecimila/Duemilanove Has (Electrically) With More Analog Input Pins And Onboard +5V Aref Jumper..
Features
- The Nano is using the chips ATmega+328P and CH340, not FT232 as official Arduino, so pls. use the driver from our site.
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
- Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Learn Arduino Nano with ease: Our ELEGOO Nano Board is the perfect choice for beginners and experts alike, with tutorials available to help you get started.
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 0.70 x 1.90 x 0.40 inches | Weight: 0.01 Pounds
See On Amazon #4
HiLetgo 3pcs Nano 3.0 ATmega328P Type-C USB CH340 Controller Board Compatible to Arduino Nano CH340 USB Driver Nano V3.0 ATmega328
Asin: B09KGVDXZY | Model: 3-01-1714 | PartNumber: 3-01-1714
Type-C Usb Download And Power.
Eight Analog Inputs Ports: A0 ~ A7.
Atmega328p-Au Mcu Chipset, Bootloaded..
Features
- Nano 3.0 ATmega328P Type-C USB CH340 Controller Board
- Atmega328P-AU MCU Chipset, bootloaded.
- Type-C USB download and Power
- Eight analog inputs ports: A0 ~ A7
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
Arduino Nano [A000005]
Asin: B0097AU5OU | Model: A000005 | PartNumber: A000005 | Ean: 3700386600050, 7640152110344
It Works With A Mini-B Usb Cable.
Arduino Is An Open-Source Hardware, Software, And Content Platform With A Worldwide Community Of Over 30 Million Active Users.
Tiny Form Factor, Complete, And Breadboard-Friendly Board Based On The Atmega328.
Features
- The Arduino Nano is one of the smallest Arduino boards available on the market
- Tiny form factor, complete, and breadboard-friendly board based on the ATmega328
- It works with a Mini-B USB cable
- Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users
- See more on Amazon...
Brand: Arduino | Manufacturer: Arduino
Dimensions: 2.17 x 3.15 x 0.98 inches | Weight: 0.02 pounds
Warranty: as described on the official website
See On Amazon #6
HiLetgo 3pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino Mano AVR ATMEGA328P
Asin: B073JGV87F | Model: 3-01-1454 | PartNumber: 3-01-1454
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
DORHEA for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Microcontroller Board, Compatible with Arduino Electronics Development Board Nano 328P Nano 3.0
Asin: B086GNYXPH | Ean: 0701715433861, 0701715439597 | UPC: 701715433861, 701715439597
It Is A Smallest, Complete And Breadboard Friendly Board. It Has Everything That For Arduino Has (Electrically) With More Analog Input Pins And On Board +5V Aref Jumper..
More Breadboard Space:Nano's Got The Breadboard-Ability Of The Mini Usb With Smaller Footprint Than Either, So Users Have More Breadboard Space. It's Got A Pin Layout That Works Well With The Mini Or The Basic Stamp (Tx, Rx, Atn, Gnd ļ¼On One Top, Power And Ground On The Other..
This Board Is Using The Chips Atmega328p And Ch340, Not Ft232 As Official For Arduino..
The Nano Has 8 Analog Inputs,Each Of Which Provide 10 Bits Of Resolution.By Default They Measure From Ground To 5 Volts, Though Is It Possible To Change The Upper End Of Their Range Using The Analogreference Function. Analog Pins 6 And 7 Cannot Be Used As Digital Pins. Additionally, Some Pins Have Specialized Functionality.
Features
- The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins. Additionally, some pins have specialized functionality
- It is a smallest, complete and breadboard friendly board. It has everything that for Arduino has (electrically) with more analog input pins and on board +5V AREF jumper.
- This board is using the chips ATmega328P and CH340, not FT232 as official for Arduino.
- More Breadboard Space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other.
- See more on Amazon...
Brand: DORHEA | Manufacturer: Dorhea
Dimensions: 0.78 x 1.77 x 0.70 inches
See On Amazon #8
Arduino Nano Every (Single Board)
Asin: B07VX7MX27 | Model: ABX00028_SML | PartNumber: ABX00028_SML | Ean: 7630049201477
Two 15 Pins Connectors (One On Each Side) That Are Pin To Pin Compatible With The Original Arduino Nano.
Get Started In Minutes With Thousands Of Sketches Available In Open Source.
Power Supply Architecture Based On A High Efficiency Dc-Dc Converter Allows Powering The Board At Up To 21V And To Drive Output Peripherals With Up To 950Ma Without Overheating..
Clock 20Mhz, Flash 48Kb, Sram 6Kb, Eeprom 256Byte..
Features
- Small (48mm x 18mm), robust and powerful board Based on the ATMega4809 AVR processor
- Clock 20MHz, Flash 48KB, SRAM 6KB, EEPROM 256byte.
- Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano
- Power supply architecture based on a high efficiency DC-DC converter allows powering the board at up to 21V and to drive output peripherals with up to 950mA without overheating.
- Get started in minutes with thousands of sketches available in open source
- See more on Amazon...
Brand: Arduino | Manufacturer: Arduino
Dimensions: 0.39 x 1.77 x 0.71 inches | Weight: 0.04 Pounds
Warranty: as described on the official website
See On Amazon #9
Arduino Nano 33 IoT with Headers [ABX00032]
Asin: B07WPFQZQ1 | Model: ABX00032 | PartNumber: ABX00032 | Ean: 7630049201545
Clock Up To 48Mhz, Flash 256Kb, Sram 32Kb, Secure Wifi And Bluetooth Connectivity With A 6-Axis Imu, Ecc608a Crypto Chip Provides Iot Security. Two 15 Pins Connectors (One On Each Side) That Are Pin To Pin Compatible With The Original Arduino Nano.
On-Board Dc-Dc Power Supply Enables The Board To Be Powered Up To 21V Maintaining High Efficiency And Offering A Lot Of Current To External Devices Without Overheating.
Pre-Certified Module With External Processor Ensures Maintaining Rf Compliance When Writing Application Code.Run Directly From High Voltages From Lead Or Multi-Cell Lithium-Ion Batteries Providing 3.3V Power Supply To Peripherals At Significant Output Current.
Small (45Mm X 18Mm), Robust And Powerful Board; 3.3V Variant Of The Nano Family. Arm Cortex-M0+ Microcontroller And A Pre-Certified Esp32-Based Wifi And Bluetooth Module From U-Blox.
Features
- The ease of use of a Nano board with the addition of secure IoT and BT connectivity
- Small (45mm x 18mm), robust and powerful board; 3.3V variant of the Nano family. Arm Cortex-M0+ microcontroller and a pre-certified ESP32-based WiFi and Bluetooth module from u-blox
- Clock up to 48MHz, Flash 256KB, SRAM 32KB, Secure WiFi and Bluetooth connectivity with a 6-axis IMU, ECC608A crypto chip provides IoT security. Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano
- Pre-certified module with external processor ensures maintaining RF compliance when writing application code.Run directly from high voltages from lead or multi-cell Lithium-ion batteries providing 3.3V power supply to peripherals at significant output current
- On-board DC-DC power supply enables the board to be powered up to 21V maintaining high efficiency and offering a lot of current to external devices without overheating
- See more on Amazon...
Brand: Arduino | Manufacturer: Arduino
Dimensions: 0.91 x 3.15 x 2.28 inches | Weight: 0.02 Pounds
Warranty: as described on the official website
See On Amazon #10
ALAMSCN 2PCS Mini Nano V3.0 ATmega328P for Arduino Micro Controller Board Module with USB Cable + Nano V3.0 Expansion I/O Shield Board Breakout Screw Terminal Adapter
Asin: B0BXKZQB1H | Model: Nano V3.0 | PartNumber: Nano V3.0 | Ean: 0687117714756 | UPC: 687117714756
The Nano Has A Number Of Facilities For Communicating With A Computer, Another For Arduino, Or Other Microcontrollers.Such As Uart Ttl (5V) Serial Communication And I2c (Twi) And Spi Communication..
Note: Download (For Arduino) Ide Atmega 328P (Old Bootloader) The Usb Chip Driver First..
An Additional Expansion Board Which Brings The I/O Out To A Series Of Screw Terminals That Can Be Handy For Projects That Are Interfacing With A Lot Of Wiring..
Nano V3. 0 Atmega328p Improved Version With 3Pcs Pin Headers Soldered (2Pcs 15Pin Headers +1Pcs 6Pin Headers). Each Of The 14 Digital Pins On The Nano Can Be Used As An Input Or Output.They Operate At 5 Volts. Each Pin Can Provide Or Receive A Maximum Of 40 Ma And Has An Internal Pull-Up Resistor (Disconnected By Default) Of 20-50 Kohms. In Addition, Analog Pins 6 And 7 Cannot Be Used As Digital Pins, Some Pins Have Specialized Functions..
Features
- The Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (for Arduino Nano 3.x). It has more or less the same functionality of the for Arduino Duemilanove, but in a different package. The Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Nano V3. 0 ATMEGA328P Improved version with 3pcs pin headers soldered (2pcs 15pin headers +1pcs 6pin headers). Each of the 14 digital pins on the Nano can be used as an input or output.They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functions.
- The Nano has a number of facilities for communicating with a computer, another for Arduino, or other microcontrollers.Such as UART TTL (5V) serial communication and I2C (TWI) and SPI communication.
- An additional expansion board which brings the I/O out to a series of screw terminals that can be handy for projects that are interfacing with a lot of wiring.
- Note: Download (for Arduino) IDE ATmega 328P (old bootloader) the USB chip driver first.
- See more on Amazon...
Brand: ALAMSCN | Manufacturer: ALAMSCN
Dimensions: 0.79 x 3.94 x 1.97 inches | Weight: 0.04 pounds
Warranty: 3 months warranty
See On Amazon #11
HiLetgo 3pcs Pro Micro ATmega32U4 5V/16MHz Type-C Module with Pin Headers Compitable with Arduino
Asin: B09KGY2NWT | Model: 3-01-1713 | PartNumber: 3-01-1713
On-Board Type-C Connector For Programming.
Rx And Tx Hardware Serial Connections.
4X10-Bit Adc Pins, 12Xdigital I/Os (5 Are Pwm Capable).
Supported Under Ide V1.0.1.
Features
- ATMega 32U4 running at 5V/16MHz
- Supported under IDE v1.0.1
- On-Board Type-C connector for programming
- 4x10-bit ADC pins, 12xDigital I/Os (5 are PWM capable)
- Rx and Tx Hardware Serial Connections
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #12
TISEKER Mini Nano V3.0 ATmega328P Microcontroller Board with USB Cable for Arduino
Asin: B0BGSXWKCM
Small Arduino Uno Board:It Is A Smallest, Complete And Breadboard Friendly Board. It Has Everything That Arduino/Genuino Uno Has (Electrically) With More Analog Input Pins And Onboard +5V Aref Jumper.More Breadboard Space:Nano's Got The Breadboard-Ability Of The Boarduino And The Mini+Usb With Smaller Footprint Than Either, So Users Have More Breadboard Space. It's Got A Pin Layout That Works Well With The Mini Or The Basic Stamp (Tx, Rx, Atn, Gnd On One Top, Power And Ground On The Other)..
This Board Is Using The Chips Atmega328p And Ch340, Support Isp Download; Support Usb Download And Power. If You Need An Older Driver, Pls Get It From GithubāPlease Read The Link That Follows Immediate. Http://Sparks.Gogo.Co.Nz/Ch340.Html; More Detals On How To Use It Please Refer To: Http://Audiodiwhy.Blogspot.Com/2018/05/One-Cheap-Arduino-Nano-Clone-O-Plus-One.Html.
Specification:The Nano Can Be Powered Via The Mini-B Usb Connection, 7-12V Unregulated External Power Supply (Pin 30), Or 5V Regulated External Power Supply (Pin 27). The Power Source Is Automatically Selected To The Highest Voltage Source.Usage: The Nano Is 100% Compatible With Arduino, With The Same Chips Atmega328p And Ch340 With The Official Version..
The Nano Has 8 Analog Inputs,Each Of Which Provide 10 Bits Of Resolution.By Default They Measure From Ground To 5 Volts, Though Is It Possible To Change The Upper End Of Their Range Using The Analogreference Function. Analog Pins 6 And 7 Cannot Be Used As Digital Pins, Some Pins Have Specialized Functionality..
Features
- The Nano for arduino can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality.
- Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version.
- This board is using the chips ATmega328P and CH340, Support ISP download; Support USB download and Power. If you need an older driver, pls get it from GitHub please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
- See more on Amazon...
Brand: TISEKER | Manufacturer: TISEKER
Dimensions: 0.75 x 1.77 x 0.67 inches
See On Amazon #13
Arduino Nano 33 IoT [ABX00027]
Asin: B07VW9TSKD | Model: ABX00027 | PartNumber: ABX00027 | Ean: 7630049201460
Clock Up To 48Mhz, Flash 256Kb, Sram 32Kb, Secure Wifi And Bluetooth Connectivity With A 6-Axis Imu, Ecc608a Crypto Chip Provides Iot Security. Two 15 Pins Connectors (One On Each Side) That Are Pin To Pin Compatible With The Original Arduino Nano.
On-Board Dc-Dc Power Supply Enables The Board To Be Powered Up To 21V Maintaining High Efficiency And Offering A Lot Of Current To External Devices Without Overheating.
Pre-Certified Module With External Processor Ensures Maintaining Rf Compliance When Writing Application Code.Run Directly From High Voltages From Lead Or Multi-Cell Lithium-Ion Batteries Providing 3.3V Power Supply To Peripherals At Significant Output Current.
Small (45Mm X 18Mm), Robust And Powerful Board; 3.3V Variant Of The Nano Family. Arm Cortex-M0+ Microcontroller And A Pre-Certified Esp32-Based Wifi And Bluetooth Module From U-Blox.
Features
- The ease of use of a Nano board with the addition of secure IoT and BT connectivity
- Small (45mm x 18mm), robust and powerful board; 3.3V variant of the Nano family. Arm Cortex-M0+ microcontroller and a pre-certified ESP32-based WiFi and Bluetooth module from u-blox
- Clock up to 48MHz, Flash 256KB, SRAM 32KB, Secure WiFi and Bluetooth connectivity with a 6-axis IMU, ECC608A crypto chip provides IoT security. Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano
- Pre-certified module with external processor ensures maintaining RF compliance when writing application code.Run directly from high voltages from lead or multi-cell Lithium-ion batteries providing 3.3V power supply to peripherals at significant output current
- On-board DC-DC power supply enables the board to be powered up to 21V maintaining high efficiency and offering a lot of current to external devices without overheating
- See more on Amazon...
Brand: Arduino | Manufacturer: Arduino
Dimensions: 0.79 x 1.97 x 2.76 inches | Weight: 0.02 Pounds
Warranty: as described on the official website
See On Amazon #14
MakerFocus Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Ar duino
Asin: B00NLAMS9C | Model: G418920056 | PartNumber: G418920056 | Ean: 6931430354309, 6921520354302, 0889736744767 | UPC: 889736744767
If You Need An Older Driver, Pls Get It From GithubāPlease Read The Link That Follows Immediate. Http://Sparks.Gogo.Co.Nz/Ch340.Html; More Details On How To Use It Please Refer To: Http://Audiodiwhy.Blogspot.Com/2018/05/One-Cheap-Arduino-Nano-Clone-O-Plus-One.Html.
Specification: The Nano Can Be Powered Via The Mini-B Usb Connection, 7-12V Unregulated External Power Supply (Pin 30), Or 5V Regulated External Power Supply (Pin 27). The Power Source Is Automatically Selected To The Highest Voltage Source. Usage: The Nano Is 100% Compatible With Ar Duino, With The Same Chips Atmega328p And Ch340 With The Official Version.
Small Ar Duino Uno Board: It Is A Smallest, Complete And Breadboard Friendly Board. It Has Everything That Ar Duino/Genuino Uno Has (Electrically) With More Analog Input Pins And Onboard +5V Aref Jumper; More Breadboard Space: Nano's Got The Breadboard-Ability Of The Boarduino And The Mini+Usb With Smaller Footprint Than Either, So Users Have More Breadboard Space. It's Got A Pin Layout That Works Well With The Mini Or The Basic Stamp (Tx, Rx, Atn, Gnd On One Top, Power And Ground On The Other).
Note: If You Want ItāTo Work On A Mac, Please Install The Diver From This: Https://Drive.Google.Com/Drive/Folders/1Phezjjtqw0vav34roivsazjf0ugmqjgn?Usp=Sharing; If You Want ItāTo WorkāUnder Windows 10, You Must Turn Off Automatic Updates Before You Install The Driver, Please Install The Diver From This: Https://Drive.Google.Com/Drive/Folders/1Tl6svgvduyh1jhfaydmqemgkdo-Rg3im?Usp=Sharing.
Features
- Matters Need Attention: Before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340 product home page: http://www.wch.cn/download/CH341SER_MAC_ZIP.html(MAC); https://www.wch.cn/downloads/COMTransmit_ZIP.html(windows); Linux should operate fine without the driver
- NOTE: If you want it to work on a MAC, please install the diver from this: https://drive.google.com/drive/folders/1phezjJtQW0vav34RoivsAzjF0ugmqjgn?usp=sharing; If you want it to work under Windows 10, you must turn off automatic updates before you install the driver, please install the diver from this: https://drive.google.com/drive/folders/1tl6sVGVduyH1JHfaYdMqeMGKdo-rg3im?usp=sharing
- If you need an older driver, pls get it from GitHub please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More details on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
- Small Ar duino UNO Board: It is a smallest, complete and breadboard friendly board. It has everything that Ar duino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper; More Breadboard Space: Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)
- Specification: The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. Usage: The Nano is 100% compatible with Ar duino, with the same chips ATmega328P and CH340 with the official version
- See more on Amazon...
Brand: Makerfire | Manufacturer: Sopear
Dimensions: 0.67 x 1.77 x 0.75 Inches | Weight: 0.04 Pounds
See On Amazon #15
OSOYOO 3pcs ProMicro Board ATmega32U4 Leonardo 5V/16MHz Module Board Type C Port for Arduino
Asin: B09TKMM8N5
ćMulti-Channelsć-This Tiny Little Board Does All Of The Neat Tricks That You're Familiar With: 9 Channels Of 10-Bit Adc, 5 Pwm Pins, 12 Dios As Well As Hardware Serial Connections Rx And Tx. Running At 16Mhz And 5V, This Board Will Remind You A Lot Of Your Other Favorite Arduino-Compatible Boards But This Little Guy Can Go Just About Anywhere..
ćAnti-Esd PackagećThe Boards Came In A Box Package With A Pinout Diagram Printed On, Each In Their Own Anti-Esd(Electronic Static Discharge) Bag With 3 Rows Of Header Pins..
ćVoltage Regulatorć-There Is A Voltage Regulator On Board So It Can Accept Voltage Up To 9V Dc.The Maximum Voltage Allowed On The Raw Pin Is 9V, 6-7V Input Recommended. If You're Supplying Unregulated Power To The Board, Be Sure To Connect To The "Raw" Pin On Not Vcc..
ćAtmega32u4 Microcontrollerć-The Promicro Is Similar To The Pro Mini Except With An Atmega32u4 On Board. The Usb Type C Transceiver Inside The 32U4 Allows Us To Add Type C Connectivity On-Board And Do Away With Bulky External Type C Interface..
Features
- USB Type C Port Reinforced -This is latest the USB type C port reinforced and make it more stronger solder points.
- ATmega32U4 microcontroller -The ProMicro is similar to the Pro Mini except with an ATmega32U4 on board. The USB type C transceiver inside the 32U4 allows us to add type C connectivity on-board and do away with bulky external type C interface.
- Multi-channels -This tiny little board does all of the neat tricks that you're familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.
- Voltage regulator -There is a voltage regulator on board so it can accept voltage up to 9V DC.The maximum voltage allowed on the RAW pin is 9V, 6-7V input recommended. If you're supplying unregulated power to the board, be sure to connect to the RAW pin on not VCC.
- Anti-ESD Package The boards came in a box package with a pinout diagram printed on, each in their own anti-ESD(Electronic Static Discharge) bag with 3 rows of header pins.
- See more on Amazon...
Brand: OSOYOO | Manufacturer: OSOYOO
Warranty: 6 month
See On Amazon #16
HiLetgo 3pcs Pro Mini Atmega328P 5V/16M Replace ATmega128 Pro Mini Atmega328 328P DC5V 16M for Arduino
Asin: B07X2JGS69 | Model: 3-01-1462-5V | PartNumber: 3-01-1462-5V
Support Serial Download, 5V/16M.
3 Pin Headers Included.
Support External Power Supply 3.8-12V Dc.
Fully Compatible To Arduino Boards.
Features
- Main chip: Atmel Atmega328P-AU
- Fully compatible to Arduino Boards
- Support Serial Download, 5V/16M
- Support external power supply 3.8-12V DC
- 3 Pin headers included
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #17
HiLetgo 3pcs Nano V3.0 ATmega328P CH340G 5V 16M Mini USB Micro Controller Board Development Board with PIN Headers Pin Unsoldered
Asin: B01DLIJQA2 | Model: 8541586069 | PartNumber: 8541586069
Support For External 5V~12V Dc Power Supply, Support Power Supply By 9V Battery..
Nano V3.0 Atmega328p Improved Version With 3Pcs Pin Headers. No Welding Needed..
Support Usb Download And Power..
Features
- Using Atmel Atmega328P-AU MCU, Support ISP download,using the same chips ATmega328P and CH340 with the official version.
- Support USB download and Power.
- Support for external 5V~12V DC power supply, Support power supply by 9V battery.
- Nano V3.0 ATMEGA328P improved version with 3pcs pin headers. No welding needed.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #18
DWEII 2PCS for Nano V3.0 ATMEGA328P Module CH340C Chip 5V 16MHz Mini USB Micro-Controller Board with 2PCS Mini USB Cable Compatible with Arduino
Asin: B09VKVX8PQ | Ean: 0701715515482 | UPC: 701715515482
It Is A Smallest, Complete And Breadboard Friendly Board. It Has With More Analog Input Pins And On Board +5V Aref Jumper, Compatible With Windows, Mac And Linux Operating System..
The Nano Has 8 Analog Inputs,Each Of Which Provide 10 Bits Of Resolution.By Default They Measure From Ground To 5 Volts, Though Is It Possible To Change The Upper End Of Their Range Using The Analogreference Function. Analog Pins 6 And 7 Cannot Be Used As Digital Pins, Some Pins Have Specialized Functionality..
This Board Is Using The Chips Atmega328p And Ch340, ,Support Isp Download; Support Usb Download And Power..
It Can Be Powered Via The Mini-B Usb Connection, 6-20V Unregulated External Power Supply (Pin 30), Or 5V Regulated External Power Supply (Pin 27). The Power Source Is Automatically Selected To The Highest Voltage Source..
Features
- Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
- it can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- It is a smallest, complete and breadboard friendly board. It has with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system.
- This board is using the chips ATmega328P and CH340, ,Support ISP download; Support USB download and Power.
- The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality.
- See more on Amazon...
Brand: DWEII | Manufacturer: DWEII
See On Amazon #19
Seeed Studio XIAO SAMD21 The Smallest Arduino Microcontroller Based on SAMD21nwith Rich Interfaces for Wearable Devices, 100% Arduino IDE Compatible, Desiged for Projects Need Arduino Micro, 3pcs.
Asin: B08745JBRP | Model: 110010004 | PartNumber: 110010004 | Ean: 0886268758132 | UPC: 886268758132
š±ćFully Compatible With Arduino Ideć Seeeduino Xiao Development Board Is Perfectly Compatible With Arduino Ide And You Can Easily Create Small Projects Using The Extensive And Comprehensive Arduino Library. It Has A 2.54Mm Pin Pitch And Can Be Used Even When Inserted Into A Breadboard Because It Is An Arduino Microcontroller.It Has A 2.54Mm Pin Pitch And Can Be Used Even When Inserted Into A Breadboard Because It Is An Arduino Microcontroller..
š±ćPerfect For Wearable And Tiny Arduino Projectsć This Microcontroller Has Good Performance In Processing But Needs Less Power. As A Matter Of Fact, It Is Designed In A Tiny Size And Can Be Used For Arduino Wearable Devices And Small Projects..
š±ćApplicationsć Seeeduino Xiao Is Suitable For Wearable Devices, Rapid Prototyping, Diy Keyboard, Usb To Multi-Channel Ttl/Usb Host Mode, Etc..
š±ćRich Interfaces In A Tiny Sizeć The Device Has 14 Gpio Pins, Each Of Which Has 11 Analog Channels, 11 Digital Channels, I2c*1, Uart*1, And Spi*1, Usb Type-C Interface*1 In A Tiny Space, Just 20Mm*17.5Mm (About The Size Of Your Thumb). Seeeduino Xiao Is The Smallest Arduino Compatible Board In The Seeeduino Series..
Features
- Powerful CPU The Seeeduino XIAO is equipped with an ARM Cortex-M0+ 32bit 48MHz microcontroller, which is three times faster than Arduino Uno and Arduino Nano. Furthermore, this Arduino IDE compatible board XIAO has 256KB flash memory and 32KB SRAM.
- Rich Interfaces in a Tiny Size The device has 14 GPIO pins, each of which has 11 analog channels, 11 digital channels, I2C*1, UART*1, and SPI*1, USB Type-C interface*1 in a tiny space, just 20mm*17.5mm (about the size of your thumb). Seeeduino XIAO is the smallest Arduino compatible board in the Seeeduino series.
- Fully compatible with Arduino IDE Seeeduino XIAO development board is perfectly compatible with Arduino IDE and you can easily create small projects using the extensive and comprehensive Arduino library. It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller.It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller.
- Applications Seeeduino XIAO is suitable for Wearable devices, Rapid prototyping, DIY keyboard, USB to multi-channel TTL/USB host mode, etc.
- Perfect for Wearable and Tiny Arduino Projects This microcontroller has good performance in processing but needs less power. As a matter of fact, it is designed in a tiny size and can be used for Arduino wearable devices and small projects.
- See more on Amazon...
Brand: seeed studio | Manufacturer: seeed studio
See On Amazon ļ»æ
Looking For Something Else?
Search