Butt Welding Clamps, 8pcs Multifunctional Small Butter-fly Shaped Auto Body Panel Clamps for Edge to Edge Welding Magnetic Ground Clamp Welding Door Alignment Tool(Silver)
Asin: B0BVZDYJSJ | Model: 16765319184846 | PartNumber: 16765319184846
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fits Your Project: Each Welding Square Tool Pipe Clamp Can Extend The Clamp Block To Provide A .4-Inch (1Cm) Tall Gap; Fits 3/16-Inch To 26 Gauge Sheet Metal Materials.
Material:The Welding Clamps Are Made Of Steel With Zinc Plating To Resist Rust And Are Simple To Install Or Remove.The Accessories Are Suitable For Heavy Duty Situations..
Contents: Welding Accessories Set Includes 8 Welding Corner Square Welder Clamps; Used To Make Precision Butt Welds And Edge-To-Edge Welds For Patch Repairs In Floors, Wings, Door Skins, Fabricating,.
Purpose: These Clamps Are Important Tools For Aligning Metal Sheets Edge-To-Edge Or Surface-To-Surface. Suitable For Using When Welding Patch Repairs In Floors, Wings, Door Skins Or Fabricating Panels.
Features
- Adaptability: Our butt welding clamps are suitable for both straight panels or curved panels. Maintains 0.40" gap between panels for edge-to-edge welding.They will work well in these 2 kinds of p
- Purpose: These clamps are important tools for aligning metal sheets edge-to-edge or surface-to-surface. Suitable for using when welding patch repairs in floors, wings, door skins or fabricating panels
- Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
- Contents: Welding accessories set includes 8 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating,
- Material:The welding clamps are made of steel with zinc plating to resist rust and are simple to install or remove.The accessories are suitable for heavy duty situations.
- See more on Amazon...
Brand: KASCLINO | Manufacturer: KASCLINO
Dimensions: 0.12 x 5.91 x 5.91 inches | Weight: 0.64 pounds
See On Amazon Similar To Butt Welding Clamps 8pcs Multifunctional
#1
BETOOLL Cast Iron Welders Angle Clamp
Asin: B075M9X1QY | Model: 17-BET-HW9202 | PartNumber: 17-BET-HW9202 | Ean: 0745780993516 | UPC: 745780993516
Holds Work Pieces At A 90-Degree Angle.
Weight: 8 Lbs.
Maximum Passage For Joints :- 2.5 Inches----Ideal For Plates, Angle Iron, Square Tubing, Pipe, Channel Iron, Etc.
Two-Way Swivel Mounted Spindle Automatically Adjusts The Clamping Block To Work Pieces Of Different Thicknesses.
Features
- Unobstructed working area allows free access for welding or assembly operations and through-ways for T joints
- Two-way swivel mounted spindle automatically adjusts the clamping block to work pieces of different thicknesses
- Holds work pieces at a 90-Degree angle
- Maximum Passage for Joints :- 2.5 Inches----Ideal for plates, angle iron, square tubing, pipe, channel iron, etc
- Weight: 8 lbs
- See more on Amazon...
Brand: BETOOLL | Manufacturer: szbrt
Dimensions: 0.24 x 0.79 x 1.02 Inches | Weight: 8.00 pounds
See On Amazon #2
4 Pcs Locking C Clamp Set, Locking Pliers with Fixed and Swivel Pads, 6 Inch, 9 Inch, 11 Inch, Metal Tools Welding Clamps for Home Farm
Asin: B09XTMX9FC
Adjustable Design: The Locking C Clamp Is Easy To Adjust To The Appropriate Clamping Size Because Of The Fine Tuning Knob Design; The Quick Release Handle Is Convenient And Labor Saving; Moreover, The Spring Provides Good Tensile Force.
Essential Supplies: In Daily Life, The Lock C Clamp Is Suitable For Electricians And Welders To Clamp Welding Boards; And Woodworkers Can Use This Metal Tool To Quickly Clamp Boards Or Frames.
Firm Locking: Welding Clamps Are Mainly Applied For Clamping Parts For Riveting, Welding, Grinding And Other Processing; Since The Jaw Can Generate Large Clamping Force, The Clamped Objects Will Not Loosen.
Sturdy To Use: The Jaw Is Forged With Carbon Steel As A Whole, Featuring With Good Toughness; The Handle Of Stamped Steel Plate, Clamping Object Without Deforming; The Heat Treatment Adjusting Rod Is Easy To Adjust The Suitable Size; Additionally, The Serrated Jaw Of Locking C Clamp Has A Strong Clamping Force.
Features
- Locking C Clamp Set: 4 welding clamps are included, including 1 piece of 6 inch locking C clamp with fixed pad, 1 piece of 6 inch locking C clamp with swivel pad, 1 piece of 9 inch locking C clamp swivel pad and 1 piece of 11 inch locking C clamp with swivel pad, meeting your everyday needs
- Sturdy to Use: the jaw is forged with carbon steel as a whole, featuring with good toughness; The handle of stamped steel plate, clamping object without deforming; The heat treatment adjusting rod is easy to adjust the suitable size; Additionally, the serrated jaw of locking C clamp has a strong clamping force
- Adjustable Design: the locking C clamp is easy to adjust to the appropriate clamping size because of the fine tuning knob design; The quick release handle is convenient and labor saving; Moreover, the spring provides good tensile force
- Firm Locking: welding clamps are mainly applied for clamping parts for riveting, welding, grinding and other processing; Since the jaw can generate large clamping force, the clamped objects will not loosen
- Essential Supplies: in daily life, the lock C clamp is suitable for electricians and welders to clamp welding boards; And woodworkers can use this metal tool to quickly clamp boards or frames
- See more on Amazon...
Brand: Minatee | Manufacturer: Minatee
See On Amazon #3
Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)
Asin: B08SR3HBVZ | Model: KR0191A | PartNumber: KR0191A | Ean: 0617256084953 | UPC: 617256084953
【Applicable Types】Each Welding Square Tool Pipe Clamp Can Extend The Clamp Block To Provide A 4-Inch (1Cm) Tall Gap; Fits 3/16-Inch To 26 Gauge Sheet Metal Materials..
【High Quality & Portable】These Panel Welding Clamps Are Made Of High Quality Matrial, Which Makes Sure The Durability And Strength; Meanwhile, These Clamps Are In Small Size Can Be Easily Placed In Your Pocket Or Welding Equipment Tool Bag..
【Easy To Use】Loosen The Winged Nut From The Alignment Screw And Then Wedge Two Panels Across From Each Other Between The Square Body And The Clamp Block; Tighten The Winged Nut To Make Sure A Firm Fixation; Use All 16 Clamps For Larger Projects, Then Perform Joint Welding Between Them..
【Perfectly Align Panels】Using The Toolly Welding Square Clamp Set To Pinch Sheet Metal Panels Level To Each Other; When These Metal Clamps Hold Panels Edge-To-Edge With A Gap Of 1Mm, You Can Quickly Weld The Sheets Together..
Features
- Product Purpose Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work.
- Perfectly Align Panels Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together.
- Applicable Types Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials.
- Easy To Use Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to make sure a firm fixation; Use all 16 clamps for larger projects, then perform joint welding between them.
- High Quality & Portable These panel welding clamps are made of high quality matrial, which makes sure the durability and strength; meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag.
- See more on Amazon...
Brand: Toolly | Manufacturer: Puyi
See On Amazon #4
Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
Asin: B089GV3NJX | Model: KR0191A | PartNumber: KR0191A | Ean: 0609832297765 | UPC: 609832297765
Each Welding Square Tool Pipe Clamp Can Extend The Clamp Block To Provide A .4-Inch (1Cm) Tall Gap; Fits 3/16-Inch To 26 Gauge Sheet Metal Materials.
Loosen The Winged Nut From The Alignment Screw Then Wedge Two Panels Across From Each Other Between The Square Body And The Clamp Block; Tighten The Winged Nut To Ensure A Secure Hold; Use All 16 Clamps For Larger Projects, Then Joint Weld Between Them.
Use The Toolly Welding Square Clamp Set To Pinch Sheet Metal Panels Level To Each Other; While These Metal Clamps Hold Panels Edge To Edge With A 1Mm Gap, You Can Quickly Weld The Sheets Together.
Features
- Butt Welding Clamps includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
- Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
- Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
- Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
- See more on Amazon...
Brand: Toolly | Manufacturer: Puyi
See On Amazon #5
Capri Tools Locking Welding Clamp, 3 Pieces
Asin: B00069CP2G | Model: R00416 | PartNumber: R00416 | Ean: 0837013004165, 0787721513384 | UPC: 787721513384, 837013004165
Durable Build: Hardened Steel Jaws With Adjustable Pressure Provide Superior Strength For Professional Metal Workers And Hobbyists.
Value Added: An Excellent Value At Half The Price Of Comparable Welding Clamps.
Quick-Lock Release: Locks Metal Pieces Firmly In Place And Includes Quick-Lock Release For Easy Removal.
Incudes Three Clamps: Includes An 11” C-Clamp, 10” Sheet Metal Clamp And 10” General Welding Clamp To Cover A Variety Of Metal Work.
Features
- ESSENTIAL ACCESSORIES: Three-piece welding clamp set to secure free-moving metal objects during the welding and fabrication process
- INCUDES THREE CLAMPS: Includes an 11 C-clamp, 10 sheet metal clamp and 10 general welding clamp to cover a variety of metal work
- DURABLE BUILD: Hardened steel jaws with adjustable pressure provide superior strength for professional metal workers and hobbyists
- QUICK-LOCK RELEASE: Locks metal pieces firmly in place and includes quick-lock release for easy removal
- VALUE ADDED: An excellent value at half the price of comparable welding clamps
- See more on Amazon...
Brand: Capri Tools | Manufacturer: Capri Tools
Dimensions: 4.70 x 12.30 x 6.40 inches | Weight: 4.55 pounds
Warranty: 1 year warranty against manufacturer defects
See On Amazon #6
QWORK 9" Locking Pliers, 2 Pack Metal Welding Clamp, Quick-lock Release for Easy Removal
Asin: B0BZ3Z6F3S | Ean: 0795973602176 | UPC: 795973602176
Durable Construction: It Is Made Of High Carbon Steel, Heat-Treated Steel With A Nickel Surface Treatment Is Beneficial For Strength And Corrosion Resistance..
U-Shaped Jaws: U-Shaped And Heat-Treated Jaws, Provides Enhanced Visibility And A Larger Workspace..
Easy To Operate: Turn Screw To Adjust Pressure To Suit The Job And Keep Adjusted For Repeated Use. 2 Pack 9 Inch Locking Pliers..
Adjustable: Screw Adjustable Locking Mechanism Ensures Maximum Locking Force, Ideal For Adjusting The Pressure According To Different Jobs..
Features
- Quick Lock Release: For welding applications and fixing awkward shapes, locks metal securely in place, quick lock release for easy removal.
- Adjustable: Screw adjustable locking mechanism ensures maximum locking force, ideal for adjusting the pressure according to different jobs.
- Durable Construction: It is made of high carbon steel, heat-treated steel with a nickel surface treatment is beneficial for strength and corrosion resistance.
- Easy to Operate: Turn screw to adjust pressure to suit the job and keep adjusted for repeated use. 2 Pack 9 inch locking pliers.
- U-shaped Jaws: U-shaped and heat-treated jaws, provides enhanced visibility and a larger workspace.
- See more on Amazon...
Brand: QWORK | Manufacturer: QWORK
See On Amazon #7
ATPEAM Butt Welding Clamps | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp Welding Door Alignment Tool
Asin: B09J5DMNHM | Ean: 5438077643250
Good Performance: These Small Panel Clamps Can Be Completely Fixed Before Butt Welding, Leaving Only A Small Gap To Make The Weld Completely Penetrate. This Is An Ideal Choice For Professionals Engaged In Sheet Metal Body Repair..
Package Included: Welding Table Clamps Set Includes 16 Welding Corner Square Welder Clamps; Used To Make Precision Butt Welds And Edge-To-Edge Welds For Patch Repairs In Floors, Wings, Door Skins, Fabricating, And Re-Skinning Projects.
Easy To Use: Loosen The Winged Nut From The Alignment Screw Then Wedge Two Panels Across From Each Other Between The Square Body And The Clamp Block; Tighten The Winged Nut To Ensure A Secure Hold; Use All 16 Clamps For Larger Projects, Then Joint Weld Between Them.
Fits Your Project: The Welding Butt Clamps Can Extend The Clamp Block To Provide A .4-Inch (1Cm) Tall Gap; The Metal Clamp Fits 3/16-Inch To 26 Gauge Sheet Metal Materials.
Features
- Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust
- Fits your Project: The welding butt clamps can extend the clamp block to provide a .4-inch (1cm) tall gap; The metal clamp fits 3/16-inch to 26 gauge sheet metal materials
- Good performance: These small panel clamps can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair.
- Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
- Package Included: Welding table clamps set includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
- See more on Amazon...
Brand: ATPEAM | Manufacturer: ATPEAM
Dimensions: 3.00 x 6.00 x 4.00 inches
See On Amazon #8
VCT 3pc Locking Grip Welding Clamp Vise C-Clamp Sheet Metal Clamp Plier Tool Set
Asin: B09SBMDBR4 | Model: 75668 | PartNumber: 75668 | Ean: 0722537896603 | UPC: 722537896603
Bright Nickel Plated Finish Easy Release Trigger Micro-Adjustment Screws.
The Pressure-Adjustable Hardened Steel Jaws Provide Excellent Strength For Professional Metal Workers And Amateurs.
Locks Metal Pieces Are Designed To Fix The Workpiece More Firmly.
Features
- 3PCS: 1PC 11'' C-clamp, 1PC 10'' flat nose welding vise, 1PC 10'' claw type welding vise to cover various metal workpieces
- Locks metal pieces are designed to fix the workpiece more firmly
- Bright Nickel plated finish Easy release trigger Micro-Adjustment screws
- The pressure-adjustable hardened steel jaws provide excellent strength for professional metal workers and amateurs
- See more on Amazon...
Brand: VCT | Manufacturer: J&R Quality Tools
Dimensions: 4.00 x 11.00 x 6.00 inches | Weight: 75.00 ounces
See On Amazon #9
Olympia Tools 9" LOCKING PLIERS & WELDING CLAMP, 11-409
Asin: B002PG4D78 | Model: 11-409 | PartNumber: 11-409 | Ean: 0883652114093 | UPC: 883652114093
U-Sharped And Heat-Treated Jaws: Provide Enhanced Visibility And More Room To Work.
Made To Last: Our Durable And Long-Lasting Tools Help You With Home, Garage & Industrial Projects. With Professional-Grade Quality, Easily Repair & Fix Issues With Our Tool Cabinet Essentials..
Quick-Lock Release: Locks Metal Pieces Firmly In Place And Includes Quick-Lock Release For Easy Removal.
Features
- ADJUSTABLE SREW TENSION: Screw-adjustable locking mechanism ensures maximum locking force, ideal for adjusting pressure to different job.
- QUICK-LOCK RELEASE: Locks metal pieces firmly in place and includes quick-lock release for easy removal
- U-SHARPED AND HEAT-TREATED JAWS: provide enhanced visibility and more room to work
- MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials.
- See more on Amazon...
Brand: Olympia Tools | Manufacturer: Olympia Tools
See On Amazon #10
Magnetic Butt Welding Clamps, 2 Pack, Auto Body, Welding, Panel welding, Edge To Edge Clamping, MPC12, Strong Hand Tools
Asin: B075ZHQYZ6 | Model: MPC12 | PartNumber: MPC12 | Ean: 0679352002637 | UPC: 679352002637
Turn The Spring-Loaded Screw To Adjust The Opening To Accept Panels Of Different Thicknesses [Max. 0.2″ (5 Mm)]..
A Magnet In The Keeper Plate Holds Your Panels Together Even When Used In The Vertical Position..
Wider-Than-Standard Clamp Body Holds Your Panels Flatter, For A More Precise Setup. Panels Will Not Spin Out Of Alignment..
Magnets In The Keeper Plate And The Clamp Body Hold Your Panels In Position For A Speedier, And More Efficient Setup. No More Fumbling While Trying To Hold The Panels And The Clamps.
Features
- The BETTER WAY to align & hold panels for butt welding.
- Magnets in the Keeper Plate and the clamp body hold your panels in position for a speedier, and more efficient setup. NO MORE fumbling while trying to hold the panels and the clamps
- Turn the spring-loaded screw to adjust the opening to accept panels of different thicknesses [Max. 0.2 (5 mm)].
- Wider-than-standard clamp body holds your panels flatter, for a more precise setup. Panels will not spin out of alignment.
- A magnet in the Keeper Plate holds your panels together even when used in the vertical position.
- See more on Amazon...
Brand: Strong Hand Tools | Manufacturer: Strong Hand Tools
Weight: 0.22 pounds
See On Amazon #11
VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New
Asin: B08MVBW4GP | Model: 43449 | PartNumber: 43449 | Ean: 0716407034479 | UPC: 716407034479
For Precise Spot Welding, Positioning, Butt Welding And Edge-To-Edge Welding, Fully Align And Clamp The Metal Plates..
24X Butt Welding Clamps.
To Align And Clamp Sheet Metal Panels For Precise Spot Welding,Butt Welding,Edge-To-Edge Welding And Tacking In Place.
Features
- Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding.
- To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place
- For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates.
- 24x Butt Welding Clamps
- See more on Amazon...
Brand: VCT | Manufacturer: J&R Quality Tools
Dimensions: 4.00 x 10.00 x 5.00 inches
See On Amazon #12
KOHAND 24 Pack 2.3 1 Inch Butt Welding Clamps, Multifunctional Small Butter-Fly Shaped Auto Body Panel Clamps for Edge to Edge Weld
Asin: B0CBBRC2T4 | Model: KOHAND | PartNumber: KOHAND | Ean: 0743388592377 | UPC: 743388592377
Easy To Use - First You Just Need To Loosen The Nuts On The Welding Clamps, Then Put The Two Sheets Into Each Side Of The Welding Clamps, And Finally Tighten The Wing Nuts, To Clamp Flat And Secure The Sheets To Be Welded..
About Returns - If You're Hesitant To Place An Order Because Of Concerns About Returns, There Is No Need At All. Our Refund Policy Is Clear And Unambiguous. For Any Reason, If The Weld Clamps Are Not As Good As You Expected..
Multi-Function - Our Butt Welding Clamps Set Multifunctional, Mainly Used To Help Hold The Sheet Metal In Place, And To Quickly And Accurately Locate The Weld, Commonly Used For Flooring, Auto Body, Door, And Other Edge-To-Edge Welding Projects..
Quality - These Butt Weld Clamps Are Made Of High Quality And Strong Carbon Steel, With Certain Resistance To Pressure, And Resistance To Friction, Not Easy To Damage, Extremely Durable, Excellent For Precision Welding, Edge-To-Edge Welding..
Features
- PACKAGE INCLUDES - You will receive 24 pack silver butt welding clamps, each measuring 2.3 1 inch, lightweight and compact, a necessary tool for sheet metal, body repair and other industries.
- QUALITY - These butt weld clamps are made of high quality and strong carbon steel, with certain resistance to pressure, and resistance to friction, not easy to damage, extremely durable, excellent for precision welding, edge-to-edge welding.
- EASY TO USE - First you just need to loosen the nuts on the welding clamps, then put the two sheets into each side of the welding clamps, and finally tighten the wing nuts, to clamp flat and secure the sheets to be welded.
- MULTI-FUNCTION - Our butt welding clamps set multifunctional, mainly used to help hold the sheet metal in place, and to quickly and accurately locate the weld, commonly used for flooring, auto body, door, and other edge-to-edge welding projects.
- ABOUT RETURNS - If you're hesitant to place an order because of concerns about returns, there is no need at all. Our refund policy is clear and unambiguous. For any reason, if the weld clamps are not as good as you expected.
- See more on Amazon...
Brand: KOHAND | Manufacturer: KOHAND
See On Amazon #13
KOHAND 8 PCS V-Type Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding, 18 Lbs Pull Force
Asin: B09FY57R3Z | Ean: 0769773712922 | UPC: 769773712922
Adjustable Design - The Adjustable V-Shaped Welding Fixture Can Be Adjusted For Different Shapes, Such As Round, Flat, And Angle Metal Surfaces. It Can Be Easily Fixed And Positioned, Saving Time And Making Them Easy To Install And Apply..
About Returns - If You're Hesitant To Place An Order Because Of Concerns About Returns, There Is No Need At All. Our Refund Policy Is Clear And Unambiguous. For Any Reason, If The Magnetic V Pads Kit Is Not As Good As You Expected, You Can Get A Refund Within 30 Days..
Wide Application - The V-Type Magnetic Welding Clamps Are Suitable For Holding Tabs, Gussets, Plates And Odd Shaped Pieces In Position For Tack Welding. They Are Widely Used In Doors, Tool Boxes, Windows, Wooden Boxes, Furniture, And Other Equipment..
8 Welding Clamps Set Clamp Magnets And Table Magnet For V Pad Adjustable Tab Holder Magnetic Pads V-Pad Holders Corner V-Pads Square Fixture Vice Grip Angle Auto Body Pipe Triangle V-Type Kit V-Sharp Base Strong Hand Tool Ground Kohand Pcs Type.
Features
- HIGH-QUALITY MATERIAL - This magnetic welding clamp is made of high-quality steel. It is durable and not easy to rust, and can be used for a long time. Both the cushion surface and the bottom have magnets, which can hold the workpiece well for welding work.
- 8 welding clamps set clamp magnets and table magnet for v pad adjustable tab holder magnetic pads v-pad holders corner v-pads square fixture vice grip angle auto body pipe triangle v-type kit v-sharp base strong hand tool ground kohand pcs type
- ADJUSTABLE DESIGN - The adjustable v-shaped welding fixture can be adjusted for different shapes, such as round, flat, and angle metal surfaces. It can be easily fixed and positioned, saving time and making them easy to install and apply.
- WIDE APPLICATION - The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment.
- ABOUT RETURNS - If you're hesitant to place an order because of concerns about returns, there is no need at all. Our refund policy is clear and unambiguous. For any reason, if the magnetic v pads kit is not as good as you expected, you can get a refund within 30 days.
- See more on Amazon...
Brand: KOHAND | Manufacturer: KOHAND
See On Amazon #14
FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp
Asin: B09QMHK33N
Great Quality Butt Welding Clamps: Panel Welding Clamps Are Constructed Of Galvanized Steel Material To Ensure Maximum Durability And Strength While Resisting Rust.
Butt Clamps Package Included: Welding Accessories Set Includes 16 Welding Corner Square Welder Clamps; Used To Make Precision Butt Welds And Edge-To-Edge Welds For Patch Repairs In Floors, Wings, Door Skins, Fabricating, And Re-Skinning Projects.
Butt Clamps Wide Application: Use The Welding Square Clamp Set To Pinch Sheet Metal Panels Level To Each Other; While These Metal Clamps Hold Panels Edge To Edge With A 1Mm Gap, You Can Quickly Weld The Sheets Together.
How To Use Butt Welding Clamps : Loosen The Winged Nut From The Alignment Screw Then Wedge Two Panels Across From Each Other Between The Square Body And The Clamp Block; Tighten The Winged Nut To Ensure A Secure Hold; Use All 16 Clamps For Larger Projects, Then Joint Weld Between Them.
Features
- Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
- How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
- Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust
- Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
- Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
- See more on Amazon...
Brand: FLKQC | Manufacturer: FLKQC
See On Amazon #15
ABN Butt Welding Clamps - 16 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
Asin: B08464DZCJ | Model: 8544 | PartNumber: 8544 | Ean: 0810009878544 | UPC: 810009878544
[Easy To Use] Loosen The Winged Nut From The Alignment Screw Then Wedge Two Panels Across From Each Other Between The Square Body And The Clamp Block; Tighten The Winged Nut To Ensure A Secure Hold; Use All 16 Clamps For Larger Projects, Then Joint Weld Between Them.
[Contents] Welding Accessories Set Includes 16 Welding Corner Square Welder Clamps; Used To Make Precision Butt Welds And Edge-To-Edge Welds For Patch Repairs In Floors, Wings, Door Skins, Fabricating, And Re-Skinning Projects.
[Built To Last] Panel Welding Clamps Are Constructed Of Zinc-Plated Steel To Ensure Maximum Durability And Strength While Resisting Rust.
[Fits Your Project] Each Welding Square Tool Pipe Clamp Can Extend The Clamp Block To Provide A .4-Inch (1Cm) Tall Gap; Fits 3/16-Inch To 26 Gauge Sheet Metal Materials.
Features
- [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
- [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
- [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
- [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust
- [Contents] Welding accessories set includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 2.90 x 6.10 x 4.00 inches
See On Amazon #16
Oungy 16 PCS Butt Welding Clamps Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding 2.17 x 1 inch
Asin: B0C48QS79J | Model: OYUS-WeldingClamps-16PCS-Silver-230426 | PartNumber: OYUS-WeldingClamps-16PCS-Silver-230426 | Ean: 0753775789730 | UPC: 753775789730
【Precise Welding】Butt Welding Clamps Are Used To Fit Straight Or Curved Plates For Spot Welding, Butt Welding, Edge-To-Edge Welding And The Alignment And Clamping Of Tacked Metal Plates. When These Metal Clamps Hold The Plates Edge-To-Edge With A Gap Of 1 Mm, You Can Quickly Weld The Plates Together..
【Specification】The Package Includes 16 Magnetic Welding Clamps, They Measure: 2.17 X 0.98 Inch, You Have Enough For Your Welding Work..
【Versatile】The Panel Clamps Set Is Versatile And Suitable For Performing Precise Butt And Edge-To-Edge Welds And Can Be Used For Welding Floors, Wings, Door Skins, Repairing Or When Fabricating Panels In Re-Skinning Projects. Note: These Body Panel Welding Clamps Are For Heavy Duty Applications..
【Easy To Use】First Loosen The Wing Nuts On The Set Screws, Then Wedge The Two Plates Horizontally Between The Square Body And The Clamp Block, After Which Tighten The Wing Nuts To Ensure A Secure Fixing. You Can Also Use All 16 Small Welding Clamps For Larger Projects And Then Joint Weld Between Them..
Features
- Durable material The welding clamps are made of welded jig carbon steel with a galvanised finish to prevent rusting to ensure maximum strength and durability for a long life.
- Easy to use First loosen the wing nuts on the set screws, then wedge the two plates horizontally between the square body and the clamp block, after which tighten the wing nuts to ensure a secure fixing. You can also use all 16 small welding clamps for larger projects and then joint weld between them.
- Precise welding Butt welding clamps are used to fit straight or curved plates for spot welding, butt welding, edge-to-edge welding and the alignment and clamping of tacked metal plates. When these metal clamps hold the plates edge-to-edge with a gap of 1 mm, you can quickly weld the plates together.
- Versatile The panel clamps set is versatile and suitable for performing precise butt and edge-to-edge welds and can be used for welding floors, wings, door skins, repairing or when fabricating panels in re-skinning projects. Note: These body panel welding clamps are for heavy duty applications.
- Specification The package includes 16 magnetic welding clamps, they measure: 2.17 x 0.98 inch, you have enough for your welding work.
- See more on Amazon...
Brand: Oungy | Manufacturer: OUYANGJIABING
Dimensions: 0.98 x 2.28 x 0.98 inches
See On Amazon #17
FIRSTINFO F3941 Patented Adjustable Butt-Welding Clamps 4 pcs- Level Alignment Function
Asin: B00YF5F9A2 | Model: F3941 | PartNumber: F3941 | Ean: 0712323806398, 0636946343583 | UPC: 712323806398, 636946343583
【Thin Gap】Provide A 0.32-Inch(0.87Mm) Gap Between Two Panels, Allowing Both Complete Joint Penetration And Partial Joint Penetration..
【Taiwan Design & Manufacture】Made In Taiwan Is Our Pride, And We Guarantee Premium Quality Without A Premium Price. Thus, We Provide Quality Assurance Tools With A 12+10 Months After-Sales Warranty (10 Months Warranty By The Register).
【Flat Alignment】Patented Design Allows To Alignment Of Two Different Thicknesses Of Sheet Materials From Either Top Or Bottom Sides..
【Sturdy Construction】Design With All Metal Material Components Makes The Clamp Built To Last..
Features
- Easy to Use Screw the wing nut to securely clamp two sheets for butt welding.
- Sturdy Construction Design with all metal material components makes the clamp built to last.
- Thin Gap Provide a 0.32-inch(0.87mm) gap between two panels, allowing both Complete Joint Penetration and Partial Joint Penetration.
- Flat Alignment Patented design allows to alignment of two different thicknesses of sheet materials from either top or bottom sides.
- Taiwan Design & Manufacture MADE IN TAIWAN is our pride, and we guarantee premium quality without a premium price. Thus, we provide quality assurance tools with a 12+10 months after-sales warranty (10 months warranty by the register)
- See more on Amazon...
Brand: FIRSTINFO TOOLS FIT YOUR NEEDS | Manufacturer: FIRSTINFO TOOLS Co., Ltd.
Dimensions: 1.57 x 9.84 x 7.09 inches | Weight: 0.84 pounds
Warranty: 12+10 months after-sales warranty (10 months warranty by the register)
See On Amazon #18
MAOPINER Butt Welding Clamps, 16 Pack Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
Asin: B08ZDKFTLN | Ean: 5438077637891
Fits Your Project: Each Welding Square Tool Pipe Clamp Can Extend The Clamp Block To Provide A .4-Inch (1Cm) Tall Gap; Fits 3/16-Inch To 26 Gauge Sheet Metal Materials.
Package Included: Welding Accessories Set Includes 16 Welding Corner Square Welder Clamps; Used To Make Precision Butt Welds And Edge-To-Edge Welds For Patch Repairs In Floors, Wings, Door Skins, Fabricating, And Re-Skinning Projects.
Wide Application: Use The Welding Square Clamp Set To Pinch Sheet Metal Panels Level To Each Other; While These Metal Clamps Hold Panels Edge To Edge With A 1Mm Gap, You Can Quickly Weld The Sheets Together.
Easy To Use: Loosen The Winged Nut From The Alignment Screw Then Wedge Two Panels Across From Each Other Between The Square Body And The Clamp Block; Tighten The Winged Nut To Ensure A Secure Hold; Use All 16 Clamps For Larger Projects, Then Joint Weld Between Them.
Features
- Extra Durable: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust
- Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
- Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
- Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
- Package Included: Welding accessories set includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
- See more on Amazon...
Brand: MAOPINER | Manufacturer: MAOPINER
See On Amazon #19
ATPEAM Cast Iron Welding Angle Clamp Heavy Duty Two Axis Welding Clamps Right Angle 90 Degrees Clamp Self Centering Jig and Fixture Clamp Welders Angle Clamp for Woodworking Corner Miter Clamp
Asin: B097BH797L
Swinging Jaw Design: Single Handle Jaw Can Be Adjusted By Bidirectional Rotation. Precision Right Angle Clamp Tool Is An Indispensable Tool For Carpenters, Handymen And Diy Workers..
Wide Application: Corner Clamps For Woodworking Can Be Used As A Clamping Device For 90° Angle Seams, Very Suitable For Aligning, Nailing, Carpentry, Welding, Screwing, Making Cabinets, Boxes And Frames..
Anti-Slip Stability: Sliding T-Shaped Single Handle With Adjustable Rotating Jaws Can Accurately Align And Fix The Workpiece. The Sliding Block Is Flat And Will Not Shake After Clamping. The Stable Clamping Screw Is Stable, Which Is Helpful For Immediate Setting And Fast Fixing..
High Performance Welding Clamp: Max Jaw Opening: 2.1"/54Mm; Jaw Hight: 1.36"/34.5Mm; Jaw Width: 4"; Jaw Width (Tip To Tip): 5-9/16"; Weight: 8 Lbs..
Features
- High-quality Materials: The main body of the cast iron welders angle clamp is made of high-quality cast iron and steel materials, with high tensile strength and more durable characteristics. The surface of the welding table clamp is sprayed with plastic to prevent rust and corrosion.
- High Performance Welding Clamp: Max Jaw Opening: 2.1/54mm; Jaw Hight: 1.36/34.5mm; Jaw Width: 4; Jaw Width (Tip to Tip): 5-9/16; Weight: 8 lbs.
- Swinging Jaw Design: Single handle jaw can be adjusted by bidirectional rotation. Precision right angle clamp tool is an indispensable tool for carpenters, handymen and DIY workers.
- Anti-slip Stability: Sliding T-shaped single handle with adjustable rotating jaws can accurately align and fix the workpiece. The sliding block is flat and will not shake after clamping. The stable clamping screw is stable, which is helpful for immediate setting and fast fixing.
- Wide Application: Corner clamps for woodworking can be used as a clamping device for 90 angle seams, very suitable for aligning, nailing, carpentry, welding, screwing, making cabinets, boxes and frames.
- See more on Amazon...
Brand: ATPEAM | Manufacturer: ATPEAM
See On Amazon
Looking For Something Else?
Search