AUCELI 2.5 Inch Inlet Exhaust Tip, Carbon Fiber Modification Luminous Tailpipe Tube, Stainless Steel Car Exhaust Tail Pipe with Frame LED Light, Universal Car Accessories for Most Vehicle
Asin: B0BZ74KJ92 | Model: Exhaust Tip | PartNumber: Exhaust Tip
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Wide Application】: This Spitfire Tailpipe Has An Inlet Diameter Of 2.5 Inches, An Outlet Diameter Of 2.6 Inches And An Overall Length Of 6.5 Inches, It Is Suitable For Exhaust Pipes With An Outside Diameter Of Less Than 2.2 Inches (55Mm). It Is An Ideal Replacement And Can Be Used Universally On Most Vehicle Exhausts..
【Quality Service】: This Tailpipe Is Cool Looking And Can Effectively Protect Your Original Exhaust From Rain, Effectively Prevent Rust Or Deformation Caused By Knocks And Prolong The Service Life. If You Are Still Unclear About Our Products, Or If The Led Light Does Not Light Up After Installation, Please Also Contact Us And We Will Provide You With A Satisfactory Solution As Soon As Possible..
【Easy Installation】: No Welding Or Drilling, Only Takes Five Minutes. First Loosen The Screws On The Exhaust Pipe, Then Install The Exhaust Pipe In The Correct Position At The End Of The Car's Tailpipe And Tighten The Screws With A Spanner. Finally Find The Small Light Wire And Connect It To The Car Tail Light. After The Installation Is Complete, Check If The Bulb Lights Up Properly..
【Cool Flame Light】: The Product Comes With Led Lights, Which Will Give A Cool Red (Or Blue) Flame Effect After Installation, Especially At Night, Giving An Amazingly Dazzling Visual Experience. The Carbon Surface Is Stylish And Simple, The Flame Light Is New And Fascinating, It Is A Great Exterior Decoration For Your Car..
Features
- Durable Stainless Steel : Made of strong and durable stainless steel material, waterproof and corrosion resistant, will not rust due to wind and rain. High temperature resistant, can withstand the high temperature of the exhaust tailpipe and will not be damaged by it. The tailpipe is firmly mounted and fits tightly for stable operation.
- Cool Flame Light : The product comes with LED lights, which will give a cool red (or blue) flame effect after installation, especially at night, giving an amazingly dazzling visual experience. The carbon surface is stylish and simple, the flame light is new and fascinating, it is a great exterior decoration for your car.
- Wide Application : This Spitfire tailpipe has an inlet diameter of 2.5 inches, an outlet diameter of 2.6 inches and an overall length of 6.5 inches, it is suitable for exhaust pipes with an outside diameter of less than 2.2 inches (55mm). It is an ideal replacement and can be used universally on most vehicle exhausts.
- Easy Installation : No welding or drilling, only takes five minutes. First loosen the screws on the exhaust pipe, then install the exhaust pipe in the correct position at the end of the car's tailpipe and tighten the screws with a spanner. Finally find the small light wire and connect it to the car tail light. After the installation is complete, check if the bulb lights up properly.
- Quality Service : This tailpipe is cool looking and can effectively protect your original exhaust from rain, effectively prevent rust or deformation caused by knocks and prolong the service life. If you are still unclear about our products, or if the LED light does not light up after installation, please also contact us and we will provide you with a satisfactory solution as soon as possible.
- See more on Amazon...
Brand: AUCELI | Manufacturer: AUCELI
Dimensions: 0.80 x 2.10 x 0.80 inches | Weight: 0.11 pounds
Warranty: 0.2
See On Amazon Similar To AUCELI 2.5 Inch Inlet Exhaust
#1
EVIL ENERGY Exhaust Muffler, Stainless Steel Exhaust Tip, Universal 15" Length (Burnt, 2'' Inlet 3'' Outlet)
Asin: B01N6EIB3B | Model: ES00060 | PartNumber: ES00060 | Ean: 0757490258687 | UPC: 757490258687
[Working Principle] The Walls Of The Muffler Are Made Of Two Layers Of Stainless Steel, Which Help Reduce Vibration And Absorb Sound..
[Distinctive Appearance] The Burned Blue Tip Of The Muffler Offers An Artistic Focus Point To The Back Of The Car. Your Vehicle Will Undoubtedly Stand Out Among The Crowd..
[Excellent Quality] Stainless Steel Is Used To Provide Long-Term Durability..
[Size And Construction] This Muffler Is Having 2" Inlet, 3" Exit, 15" Length, Polished Stainless Steel. Please Measure Your Car's Inlet Before Purchasing..
Features
- [Premium Acoustic Control] EVIL ENERGY muffler is densely packed with excellent, sound-absorbing cotton, giving a low, deep tone that is reverberated to increase sound. Easy to install, bolts on in minutes.
- [Size and Construction] This muffler is having 2 inlet, 3 exit, 15 length, polished stainless steel. Please measure your car's inlet before purchasing.
- [Working Principle] The walls of the muffler are made of two layers of stainless steel, which help reduce vibration and absorb sound.
- [Excellent Quality] Stainless steel is used to provide long-term durability.
- [Distinctive Appearance] The burned blue tip of the muffler offers an artistic focus point to the back of the car. Your vehicle will undoubtedly stand out among the crowd.
- See more on Amazon...
Brand: EVIL ENERGY
Weight: 2.62 pounds
See On Amazon #2
2.5'' Mild Steel Custom Exhaust Kit Tubing Mandrel Bend Pipe Straight & U-Bend 16 Gauge Universal 8PCS
Asin: B088N6WSR5
2 X 48" Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures..
Each 2.5" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-Fit Installation.
16-Gauge Piping Walls Of This Custom Exhaust Kit.
Features
- This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls
- 16-Gauge Piping Walls Of This Custom Exhaust Kit
- 2 X 48 Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures.
- Each 2.5 Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation
- See more on Amazon...
Brand: YOLANDO | Manufacturer: JY Performance
Dimensions: 4.00 x 48.00 x 16.00 inches
See On Amazon #3
Universal ID 2.5 Inch to OD 3 Inch Exhaust Adapter, Stainless Steel Exhaust Coupler(2 1/2" ID to 3" OD), Pipe Adapter Whole Length 3.6 Inch
Asin: B0BQC17TKD | Model: AP_IO250300 | PartNumber: AP_IO250300 | Ean: 0677355050907 | UPC: 677355050907
3.6 Inch Length Flare Pipe Is One Piece Construction Without Welding, Manufactured With Precision Bends And Oe-Style Routings,Heavy Duty 16-Gauge Stainless Steel Exhaust Connector Coupler For Longer Life..
Polished Shiny Surface Ensure The Smooth Both Inside And Outside. Flat Incision In The Connecting Edge..
The Exhaust Reducer Is Made Of T201 S/S Nonmagnetic Stainless Steel. The Surface Is Polished, Shine And Nice. This Exhaust Coupler Is Anti-Corrosion And Durable, Ideal For All Piping Connection..
Features
- Size: ID 2.5 inch to OD 3 inch exhaust adapter. Pipe length 3.6 inch, pipe thickness 0.054", please allow tolerance 0.12".
- The exhaust reducer is made of T201 S/S Nonmagnetic Stainless Steel. The surface is polished, shine and nice. This exhaust coupler is anti-corrosion and durable, ideal for all piping connection.
- 3.6 inch Length flare pipe is one piece construction without welding, manufactured with precision bends and OE-style routings,heavy duty 16-Gauge stainless steel exhaust connector coupler for longer life.
- Polished shiny surface ensure the smooth both inside and outside. Flat incision in the connecting edge.
- See more on Amazon...
Brand: eLifecenter | Manufacturer: Emotor Industries
Dimensions: 3.00 x 3.60 x 3.00 inches
Warranty: We warranty 90 days from the date of purchase
See On Amazon #4
DNA Motoring ZTL-25SS 16 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit
Asin: B085L9M7GS | Model: ZTL-25SS | PartNumber: ZTL-25SS | Ean: 0194286051976 | UPC: 194286051976
Universal Kit: 4 Pcs 48" Straight Pipes, 4 Pcs 90 Degree Pipes, 4 Pcs 45 Degree Pipes, 4 Pcs 180 Degree U-Bends.
Diy Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Sturdy Structure: Made Of High Quality Stainless Steel With Computerized Mandrel-Bends For Strength And Durability; I.E. Maximizing Smoothest High Exhaust Air Flow Rate.
Easy To Use: Slip Fit Joints To Provide Easiest Fabrication.
Features
- Specification: 18-Gauge Piping Walls ; Inlet / Outlet Size (IN): 2.5"OD
- Easy To Use: Slip Fit Joints to Provide Easiest Fabrication
- Universal Kit: 4 pcs 48 Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends
- Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability; i.e. Maximizing Smoothest High Exhaust Air Flow Rate
- DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It
- See more on Amazon...
Brand: DNA MOTORING | Manufacturer: DNA Motoring
Dimensions: 6.00 x 49.00 x 19.00 inches
Warranty: Please contact the seller directly for warranty information for this product
See On Amazon #5
Walker 54129 Exhaust Pipe 2.5" Inlet (ID) 2.5" Outlet (OD) for Ford F-150
Asin: B000C93DTO | Model: 54129 | PartNumber: 54129 | Ean: 0086387541299 | UPC: 086387541299
Inhibits Corrosion -- Durable Aluminized-Steel Construction To Inhibit Corrosion And Promote Performance.
Available In Different Sizes -- Offered In A Variety Of Lengths And Diameters And Features The Appropriate Inlet Diameter (I.D.) - Outlet Diameter (O.D.) Connection; See Product Specifications For More Information.
Oe-Style Performance -- Direct-Fit Design Is Fixture Checked To Ensure A Precise Fit That Performs Like Original Equipment.
Better Together -- Use Premium Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Easy To Install -- Manufactured With Precision Bends And Oe-Style Routings, Hangers And Connectors For Easy Installation (Where Applicable).
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 2004-2004 Ford F-150 Heritage; 1997-1997 Ford F-150; 1998-1998 Ford F-150; 1999-1999 Ford F-150; 2000-2000 Ford F-150; 2001-2001 Ford F-150; 2002-2002 Ford F-150; 2003-2003 Ford F-150
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- INHIBITS CORROSION -- Durable aluminized-steel construction to inhibit corrosion and promote performance
- EASY TO INSTALL -- Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE -- Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) - Outlet Diameter (O.D.) connection; see product specifications for more information
- See more on Amazon...
First Available: 11/14/2013
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 2.50 x 38.00 x 2.50 Inches | Weight: 5.18 pounds
Warranty: No Warranty
See On Amazon #6
Thrush Muffler Deep Performance Tone Inlet 2.5 Pipe Connection Offset Outlet 2.5 Center
Asin: B00029J3AW | Model: 17715 | PartNumber: 17715 | Ean: 0086387177153, 7258007056329 | UPC: 086387177153
Flexible Solution -- Customizable Design Offered In A Variety Of Styles And Sizes For Universal Fitment (May Require Specialized Fabrication And/Or Welding).
Versatile Design -- Reversible Flow For Maximum Flexibility On Customized Installations.
Buy With Confidence -- Comes With Thrush's 90-Day Limited Warranty.
Specs -- Available In A Variety Of Body Styles; 2-In., 2.25-In. And 2.5-In. Inlet/Outlet Size Configurations; See Product Specifications For More Information.
Engineered To Last -- 100% Aluminized-Coated Shell And Spun Lock Heads For Long Life.
Features
- CLASSIC SOUND -- Tri-flow design provides that classic Thrush sound
- ENGINEERED TO LAST -- 100% aluminized-coated shell and spun lock heads for long life
- FLEXIBLE SOLUTION -- Customizable design offered in a variety of styles and sizes for universal fitment (may require specialized fabrication and/or welding)
- SPECS -- Available in a variety of body styles; 2-in., 2.25-in. and 2.5-in. inlet/outlet size configurations; see product specifications for more information
- VERSATILE DESIGN -- Reversible flow for maximum flexibility on customized installations
- BUY WITH CONFIDENCE -- Comes with Thrush's 90-day limited warranty
- See more on Amazon...
Brand: Thrush | Manufacturer: Thrush
Dimensions: 4.90 x 19.70 x 10.40 inches | Weight: 4.70 Pounds
Warranty: No Warranty
See On Amazon #7
2.5 Inch Universal T304 Stainless Steel Exhaust Pipe Tubing Kit 16 Gauge Custom Straight U Bend 45 & 90 Degree Mandrel 8PCS
Asin: B0BCSKWMKW | Model: Stainless Steel Exhaust Pipe Kit | PartNumber: Stainless Steel Exhaust Pipe Kit | Ean: 0754003857085 | UPC: 754003857085
16-Gauge Piping Walls Of This Custom Exhaust Kit.
Each 2.5" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-Fit Installation.
2 X 48" Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures..
Features
- This Universal Custom Exhaust Kit Made of High Quality T304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls
- 2 X 48 Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures.
- 16-Gauge Piping Walls Of This Custom Exhaust Kit
- Each 2.5 Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation
- See more on Amazon...
Brand: JY PERFORMANCE | Manufacturer: JY PERFORMANCE
Dimensions: 4.00 x 48.00 x 16.00 inches | Weight: 27.00 pounds
Warranty: 90 days
See On Amazon #8
4 Pack 304 Stainless Steel Mandrel Bend Elbow, 90 Degree Exhaust Elbow Pipe, 2.5 Inch OD Mandrel Elbow, Thickness 16GA/.065" for Car Modified Exhaust Elbow Pipe, Stair Handrail, Exhaust System
Asin: B0957CDBTF | Ean: 0613966160208 | UPC: 613966160208
304 Stainless Steel: Mirror Polishing; Durable Use And Not Easily Damaged; Rust-Resistance, Anti-Oxidation..
4 Pack X 2.5” Stainless Steel Mandrel Bend Elbow 90 Degree Bend Elbow..
2.5" Mandrel Bend Elbow Suits For Exhaust System, Intake System, Sanitary Pipe Connection, Car Modified Exhaust Elbow Pipe, Stair Handrail, Etc..
Back Arc Length: 5.9In/150Mm; Centerline Bend Degree: 90°..
Features
- Exhaust elbow 2.5 inch outer diameter; 16GA/.065" (1.5mm) wall thickness.
- Back Arc length: 5.9in/150mm; Centerline Bend Degree: 90 .
- 304 Stainless Steel: Mirror polishing; Durable use and not easily damaged; Rust-resistance, anti-oxidation.
- 2.5 Mandrel bend elbow suits for exhaust system, intake system, sanitary pipe connection, car modified exhaust elbow pipe, stair handrail, etc.
- 4 Pack x 2.5 Stainless Steel Mandrel Bend Elbow 90 Degree Bend Elbow.
- See more on Amazon...
Brand: Acrux7 | Manufacturer: Acrux7
Dimensions: 0.04 x 5.90 x 2.50 inches
See On Amazon #9
DNA MOTORING ZTL-25SS-8P 8 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit
Asin: B0BXD4X4Z9 | Model: ZTL-25SS-8P | PartNumber: ZTL-25SS-8P | Ean: 0194286152178 | UPC: 194286152178
Universal Kit: 2Pcs 48" Straight Pipes, 2Pcs 90 Degree Pipes, 2Pcs 45 Degree Pipes, 2Pcs 180 Degree U-Bends.
Diy Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Sturdy Structure: Made Of High Quality Stainless Steel With Computerized Mandrel-Bends For Strength And Durability.
Easy To Use: Slip Fit Joints To Provide Easiest Fabricatio.
Features
- Specification: 18-Gauge Piping Walls ; Inlet / Outlet Size (IN): 2.5"OD
- Easy To Use: Slip Fit Joints to Provide Easiest Fabricatio
- Universal Kit: 2pcs 48 Straight Pipes, 2pcs 90 Degree Pipes, 2pcs 45 Degree Pipes, 2pcs 180 Degree U-Bends
- Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability
- DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It
- See more on Amazon...
Brand: DNA MOTORING | Manufacturer: DNA Motoring
Warranty: Please contact the seller directly for warranty information for this product.
See On Amazon #10
Walker 41726 Exhaust Pipe 3" Inlet (ID) 2.5" Outlet (ID)
Asin: B0015KZL26 | Model: 41726 | PartNumber: 41726 | Ean: 0086387417266 | UPC: 086387417266
The Right Connection -- For Connecting Exhaust Pipe And/Or Tubing.
Quality Materials -- Made From Aluminized Steel For Durability And Long Life.
Better Together -- Use Quality Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Smooth Finish -- Burr-Free Construction For Proper Fitment.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Universal fit, check product dimensions
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- THE RIGHT CONNECTION -- For connecting exhaust pipe and/or tubing
- SMOOTH FINISH -- Burr-free construction for proper fitment
- QUALITY MATERIALS -- Made from aluminized steel for durability and long life
- BETTER TOGETHER -- Use quality Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- See more on Amazon...
First Available: 11/14/2013
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 4.00 x 6.00 x 4.00 inches | Weight: 1.10 Pounds
Warranty: No Warranty
See On Amazon
Looking For Something Else?
Search