KEMIMOTO Whip Lights Spring Mounting Base LED Whips Spring Base Quick Release ATV Whip Spring for UTV ATV Boat Offroad Side-by-Side Compatible with Polaris RZR Can-Am Maverick X3 Sportsman, 2pc
Asin: B0BZLQ42B3 | Model: 2B0111-14101BK(2) | PartNumber: 2B0111-14101BK(2)
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Easy Installation】Unlike Other Spring Bases, Kemimoto Whip Spring Bases Don't Need To Rotate Whip Lights To Fasten The Spring Base. Simply Remove The Original Bases Of Whip Lights And Replace Them With The Upgraded Kemimoto Spring Base Right Away! Quick Installation In One Second. View The Video To Confirm The Compatibility Of Your Whip Light With The Kemimoto Spring Bases..
【Heavy-Duty】Kemimoto Spring Bases Are Made Of Heavy-Duty Spring Steel With Solid Black Powder Coating. The Washers And Nuts Are 304 Stainless Steel Which Means The Bases Are Anti-Rust, Corrosion, And Scratch-Resistant..
【What You Get】Every Spring Base Comes With One Spring Washer, One Flat Washer, And One Nut..
【Protect Whip Light】Adds Extra Flex To Your Utv Whip Lights. It Will Help Save Your Whip In The Wind From Being Damaged From Its Bending Let The Spring Bend, Not The Whip Itself. They Seem Very Stiff, But They Do Bend Very Easily With The Whips In Place. Especially In High Winds Or Driving In The Jungle..
【2024 Upgraded Anti-Rotation Design】Kemimoto Upgraded Whip Spring Mounting Bases Are Designed With 8-Ball Special Grooves, Whip Lights Stay Firmly In Place Even When You Are Rocking And Rolling Down The Trail. Compatible With Utv Atv Whip Lights That Have An 8-Ball Bearing Design..
Features
- Warm Prompt for Compatibility 8 Beads Fixed grooves (this item does NOT fit 6 ball bearings). Not compatible with whip lights with center pin. KEMIMOTO Spring Mounting Bases are specially designed for Whip Lights, UTV ATV side-by-side offroad led whip lights. Quick easy upgrade your whip lights. DO NOT work for antennas.
- 2024 Upgraded Anti-Rotation Design KEMIMOTO upgraded whip spring mounting bases are designed with 8-ball special grooves, whip lights stay firmly in place even when you are rocking and rolling down the trail. Compatible with utv atv whip lights that have an 8-ball bearing design.
- Easy installation Unlike other spring bases, KEMIMOTO whip spring bases don't need to rotate whip lights to fasten the spring base. Simply remove the original bases of whip lights and replace them with the upgraded KEMIMOTO spring base right away! Quick installation in one second. View the video to confirm the compatibility of your whip light with the KEMIMOTO spring bases.
- Protect Whip Light Adds extra flex to your utv whip lights. It will help save your whip in the wind from being damaged from its bending let the spring bend, not the whip itself. they seem very stiff, but they do bend very easily with the whips in place. Especially in high winds or driving in the jungle.
- Heavy-Duty KEMIMOTO Spring Bases are made of heavy-duty Spring Steel with Solid Black Powder Coating. The washers and nuts are 304 Stainless Steel which means the bases are anti-rust, corrosion, and scratch-resistant.
- What You Get Every spring base comes with one spring washer, one flat washer, and one nut.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
See On Amazon Similar To KEMIMOTO Whip Lights Spring Mounting
#1
KEMIMOTO Whip Light Mount 2PCS, Heavy Duty CNC Machined Aluminum 360 Adjustable UTV Whip Mount, Fit 1.75"-2" Roll Bar, Fit Whip Light Flag Pod Light Bar Antenna
Asin: B08RS5YKL4 | Model: B0111-02504BK(2) | PartNumber: B0111-02504BK(2)
360° Stable Adjustable: 12 Pins On The Base Allow Angle Adjustment From 30° To 360°. Sturdy Material, Precision Mechanism, And Screw Fixing, Provide A Secure Mounting Bracket For Lights And Flags..
Fitment: This Utv Whip Mount Fits 1.75"-2" Roll Bar, Is Compatible With Can-Am Maverick X3 & X3 Max, Polaris Rzr, Talon, Kawasaki Mule & Teryx... Does Not Fit Pro-Fit Cage And Atv..
Application: 12.2Mm (0.48Inch) Hole Diameter Of The Mount Works Well With Whip Lights, Flags, Light Bars, Light Pods, Antennas….
Easy To Install: Installation Requires Only Screws, No Drilling Or Trimming. All Necessary Mounting Tools And Hardware Are Included..
Features
- HEAVY-DUTY CNC-MACHINED ALUMINUM: The whip mount is made with CNC aluminum machining. Precision machining, excellent mechanical strength, beautiful glossy appearance, make this UTV whip mount the premium and solid product.
- EASY TO INSTALL: Installation requires only screws, no drilling or trimming. All necessary mounting tools and hardware are included.
- 360 STABLE ADJUSTABLE: 12 pins on the base allow angle adjustment from 30 to 360 . Sturdy material, precision mechanism, and screw fixing, provide a secure mounting bracket for lights and flags.
- APPLICATION: 12.2mm (0.48inch) hole diameter of the mount works well with whip lights, flags, light bars, light pods, antennas
- FITMENT: This UTV whip mount fits 1.75-2 roll bar, is compatible with Can-Am Maverick X3 & X3 MAX, Polaris RZR, Talon, Kawasaki Mule & Teryx... Does not fit Pro-Fit cage and ATV.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 1.42 x 4.53 x 3.07 Inches | Weight: 0.66 pounds
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #2
KEMIMOTO UTV Whip Mount Flag Whip Light Mount 2PCS, Heavy Duty Adjustable for 1.75-2 inch Roll Bar Cage Compatible with RZR 900 1000 XP Pro Turbo Maverick Commander
Asin: B0B2V925P7 | Model: B0111-02507BK(2) | PartNumber: B0111-02507BK(2)
【Easy To Install】Easy To Install With The Mounting Tool, Directly Bolt-On Design, No Drilling Or Trimming. The Whip Light Mounting Angle Can Be Adjusted, You Can Only Loosen One Bolt And Change It To The Perfect Angle You Want..
【Fitment】Utv Flag Mount Is Compatible With All Utv, Such As Compatible With Rzr 900/ 1000/ Xp/ Pro, Compatible With Maverick/ X3/ Commander, Compatible With Talon, Mule Yxz, And The List Goes On. The Utv Flag Mount Can Be Mounted On A 1.75"- 2" Roll Bar..
【Adaptability】The Hole Diameter Size Of The Utv Whip Mount Is About 12.2Mm/0.48Inch, That Is To Say, You Can Attach Anything To This Whip Light Mount As Long As Its Base Size Is 12Mm..
【More Sturdy Construction】 Our Different Inner Shape Makes The Construction More Stable. Prevent Hole Wear Problems Caused By Long-Term Use Of Screws..
Features
- Function Mounting a flag or whip light to your machine will give other riders notice that you are on the track, trail, or dune.
- More Sturdy Construction Our different inner shape makes the construction more stable. Prevent hole wear problems caused by long-term use of screws.
- Easy to Install Easy to install with the mounting tool, directly bolt-on design, no drilling or trimming. The whip light mounting angle can be adjusted, you can only loosen one bolt and change it to the perfect angle you want.
- Adaptability The hole diameter size of the utv whip mount is about 12.2mm/0.48inch, that is to say, you can attach anything to this whip light mount as long as its base size is 12mm.
- Fitment UTV Flag Mount is compatible with all UTV, such as compatible with RZR 900/ 1000/ XP/ Pro, Compatible with Maverick/ x3/ Commander, Compatible with Talon, Mule YXZ, and the list goes on. The utv flag mount can be mounted on a 1.75- 2 roll bar.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 2.36 x 5.51 x 3.03 Inches | Weight: 0.66 Pounds
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #3
KEMIMOTO 2pc 3ft Bluetooth Whip Lights for Side by Side, Turning Signal Function Compatible with Polaris RZR Can-Am Maverick X3, LED Whip Lights for UTV ATV Buggy Boat Offroad
Asin: B08TC77Z9W | Model: KM1B0804-03201CL | PartNumber: KM1B0804-03201CL
【Easy To Install】Led Light Whip For Side-By-Side Has A Quick-Release Mounting Base For Easy To Install Or Take Off. American Flags With Adjustable Mounting Clamps To Prevent The Flag From Entangling, Let The Flag Wave In The Wind On Whip Light Flag Pole. The Aluminum Base Is 12Mm Dia (Fits Most Whip Mounts)..
【Package Includes】Two 3Ft Kemimoto Whip Lights, One Rf Remote Control, Two Usa Flags, Flag Mounting Hardware, And Installation Instruction..
【Turning Signal & Brake Light】Kemimoto Bluetooth-Controlled Led Whip Lights For Utv Can Be Connected To Taillights And Turn Signals For Brake Light And Turn Signal Functions. Please Refer To The Manual For Specific Wiring Connections..
【Wide Application】Kemimoto Led Whip Light Is Universal And Fits All Off-Road Vehicles, Truck Atvs Utvs Sxs Boat Go Kart Motorcycle, Compatible With Polaris Rzr 800/ 900/ 1000/ Xp / Pro, Compatible With Can-Am Maverick X3 Commander, Compatible With Talon 1000, Yxz 1000, Teryx, Sportsman, Outlander, Etc..
【Waterproof & Durability】Kemimoto Light Whips For Utv Is Ip67 Waterproof Rated. The Light Whips Are Covered By Transparent Heat-Shrinkable Tubes Which Are Made Of Eva And High-Toughness Silicone, Can Be Bendable, And Protect The Waterproof 5050 Smd Chips From Water And Dust. Led Light Whips Have Passed 55,000+ Hours Of Durability Tests..
【Cool & Safe】Kemimoto Utv Led Whips Has 366+ Lighting Modes To Glow In 360°Direction With The Spiral Led Lights To Brighten The Whole Sky, Which Will Help You Stand Out From The Group, Let Them Notice Where You Are, Especially On The Dune Hill, Track, Or Trail..
Features
- APP Control KEMIMOTO atv whip lights can be controlled by Bluetooth or RF remote control. With the smartphone APP, there are 212 light modes settings, music sync mode, schedule timing function, 100 light speed adjustable levels, and 100 light brightness adjustable levels. With RF remote control, lighted whips for UTV have 366 light modes, 10 solid colors modes, 6-speed adjustable levels, and 10 brightness adjustable levels.
- Cool & Safe KEMIMOTO utv led whips has 366+ Lighting Modes to glow in 360 direction with the spiral LED lights to brighten the whole sky, which will help you stand out from the group, let them notice where you are, especially on the dune hill, track, or trail.
- Easy to Install LED light whip for side-by-side has a quick-release mounting base for easy to install or take off. American Flags with adjustable mounting clamps to prevent the flag from entangling, let the flag wave in the wind on whip light flag pole. The aluminum base is 12mm dia (fits most whip mounts).
- Waterproof & Durability KEMIMOTO light whips for utv is IP67 Waterproof rated. The light whips are covered by transparent heat-shrinkable tubes which are made of EVA and high-toughness silicone, can be bendable, and protect the waterproof 5050 SMD chips from water and dust. Led light whips have passed 55,000+ hours of durability tests.
- Turning signal & Brake light KEMIMOTO Bluetooth-controlled led whip lights for utv can be connected to taillights and turn signals for brake light and turn signal functions. Please refer to the manual for specific wiring connections.
- Wide Application KEMIMOTO led whip light is universal and fits all off-road vehicles, Truck ATVs UTVs SXS Boat Go Kart Motorcycle, compatible with Polaris RZR 800/ 900/ 1000/ xp / pro, compatible with Can-Am Maverick X3 Commander, compatible with Talon 1000, YXZ 1000, Teryx, Sportsman, Outlander, etc.
- Package Includes Two 3ft kemimoto whip lights, one RF remote control, two USA flags, flag mounting hardware, and installation instruction.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
Dimensions: 1.97 x 37.40 x 1.97 Inches
Warranty: 12-month
See On Amazon #4
KEMIMOTO 2pc 3ft Spiral Whip Lights for Side by Side, LED Whip Lights for UTV ATV Boat Offroad, RF Remote Control Whip LED Antenna Compatible with Polaris RZR Can-Am Maverick X3 Sportsman
Asin: B08TC8RM2G
【Waterproof & Durability】Kemimoto Light Whips For Utv Is Ip67 Waterproof Rated. The Light Whips Are Covered By Transparent Heat-Shrinkable Tubes Which Are Made Of Eva And High-Toughness Silicone, Can Be Bendable, And Protect The Waterproof 5050 Smd Chips From Water And Dust. Led Light Whips Have Passed 55,000+ Hours Of Durability Tests..
【Wide Application】Kemimoto Led Whip Light Is Universal And Fits All Off-Road Vehicles, Truck Atvs Utvs Sxs Boat Go Kart Motorcycle, Compatible With Polaris Rzr 800/ 900/ 1000/ Xp / Pro, Compatible With Can-Am Maverick X3 Commander, Compatible With Talon 1000, Yxz 1000, Teryx, Sportsman, Outlander, Etc..
【Package Includes】Two 3Ft Kemimoto Whip Lights, One Rf Remote Control, Two Usa Flags, Flag Mounting Hardware, And Installation Instruction..
【One-To-One Control】Kemimoto Atv Whip Lights Can Be Controlled By Rf Remote Control. With Rf Remote Control, Lighted Whips For Utv Have 366+ Light Modes, 12 Solid Colors Mode, 7 Speed Adjustable Levels, And 10 Brightness Adjustable Levels..
【Easy To Install】Led Light Whip For Side-By-Side Has A Quick-Release Mounting Base For Easy To Install Or Take Off, And You Can Also Use The Dust Cap To Prevent Mud Or Sand Stuck On The Base. American Flags With Adjustable Mounting Clamps To Prevent The Flag From Entangling, Let The Flag Wave In The Wind On Whip Light Flag Pole. The Aluminum Base Is 12Mm Dia (Fits Most Whip Mounts)..
Features
- Cool & Safe KEMIMOTO utv led whips has 366+ Lighting Modes to glow in 360 direction with the spiral LED lights to brighten the whole sky, which will help you stand out from the group, let them notice where you are, especially on the dune hill, track, or trail.
- Easy to Install LED light whip for side-by-side has a quick-release mounting base for easy to install or take off, and you can also use the dust cap to prevent mud or sand stuck on the base. American Flags with adjustable mounting clamps to prevent the flag from entangling, let the flag wave in the wind on whip light flag pole. The aluminum base is 12mm dia (fits most whip mounts).
- Waterproof & Durability KEMIMOTO light whips for utv is IP67 Waterproof rated. The light whips are covered by transparent heat-shrinkable tubes which are made of EVA and high-toughness silicone, can be bendable, and protect the waterproof 5050 SMD chips from water and dust. Led light whips have passed 55,000+ hours of durability tests.
- One-to-one Control KEMIMOTO atv whip lights can be controlled by RF remote control. With RF remote control, lighted whips for UTV have 366+ light modes, 12 solid colors mode, 7 speed adjustable levels, and 10 brightness adjustable levels.
- Wide Application KEMIMOTO led whip light is universal and fits all off-road vehicles, Truck ATVs UTVs SXS Boat Go Kart Motorcycle, compatible with Polaris RZR 800/ 900/ 1000/ xp / pro, compatible with Can-Am Maverick X3 Commander, compatible with Talon 1000, YXZ 1000, Teryx, Sportsman, Outlander, etc.
- Package Includes Two 3ft kemimoto whip lights, one RF remote control, two USA flags, flag mounting hardware, and installation instruction.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
Dimensions: 1.97 x 37.40 x 1.97 inches
See On Amazon #5
KEMIMOTO UTV Whip Mount Flag Light Mounting Bracket 1 PCS, Heavy Duty Adjustable for 1.75-2 inch Roll Bar Cage Compatible with Polaris RZR 900 1000 XP Pro Turbo Can Am Maverick X3 Commander
Asin: B09X34Q7HZ | Model: B0111-02507BK | PartNumber: B0111-02507BK
【Easy To Install】Easy To Install With The Mounting Tool, Directly Bolt-On Design, No Drilling Or Trimming. Kemimoto Whip Light Mounting Angle Can Be Adjusted, You Can Only Loosen One Bolt And Change It To The Perfect Angle You Want..
【Fitment】Kemimoto Utv Whip Mount Compatible With All Utv, Such As Compatible With Rzr 900/ 1000/ Xp/ Pro, Compatible With Maverick/ X3/ Commander, Talon, Mule Yxz, And The List Goes On. The Utv Flag Mount Can Be Mounted On A 1.75"- 2" Roll Bar..
【Adaptability】The Hole Diameter Size Of The Utv Whip Mount Is About 12.2Mm/0.48Inch, That Is To Say, You Can Attach Anything To Kemimoto Whip Lights Mount As Long As Its Base Size Is 12Mm..
【More Sturdy Construction】 Kemimoto Mount Different Inner Shape Makes The Construction More Stable. Prevent Hole Wear Problems Caused By Long-Term Use Of Screws..
Features
- Function Mounting a flag or whip light to your machine will give other riders notice that you are on on the track, trail, or dune.
- More Sturdy Construction kemimoto mount different inner shape makes the construction more stable. Prevent hole wear problems caused by long-term use of screws.
- Easy to Install Easy to install with the mounting tool, directly bolt-on design, no drilling or trimming. kemimoto whip light mounting angle can be adjusted, you can only loosen one bolt and change it to the perfect angle you want.
- Adaptability The hole diameter size of the utv whip mount is about 12.2mm/0.48inch, that is to say, you can attach anything to kemimoto whip lights mount as long as its base size is 12mm.
- Fitment kemimoto utv whip mount compatible with all UTV, such as compatible with RZR 900/ 1000/ XP/ Pro, compatible with Maverick/ x3/ Commander, Talon, Mule YXZ, and the list goes on. The utv flag mount can be mounted on a 1.75- 2 roll bar.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 1.77 x 5.51 x 3.54 Inches | Weight: 0.66 Pounds
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #6
KEMIMOTO 2PCS UTV Whip Light Mounts Flag Pole Mounts Light Bar Brackets CB Antenna Mounts, Compatible with Polaris Ranger General Can-Am Defender Commander Maverick Sport Trail Pro-Fit Cage, Black
Asin: B0CBPP9QFF | Model: B0111-10602BK(2) | PartNumber: B0111-10602BK(2)
360° Adjustable: Light Bar Bracket Has 360° Rotation Adjustability For You To Turn It Freely For Different Purposes. Light Bar Mount Using 12 Pins To Lock The Mount In And Keep It More Stable Than Using A Single Screw..
Fitment: Cb Antenna Mount Only Fits Utv Pro-Fit Cages (Channel Shaped Cages), Is Compatible With Polaris Ranger General Can-Am Defender Commander (2021+) Maverick Trail Sport..
Application: 12.2Mm (0.48Inch) Hole Diameter Of Kemimoto Mounting Bracket Works Great For Installing Led Whip Lights, Flags, Led Light Bars, Led Pods, Cb Antennas On The Utv Cage..
Stronger: Unique-Designed Flag Mount Using Stiffener Rib To Be More Stable. Cooperating With 10Mm-Thick Base, Flag Bracket Would Hold Your Product Up To Much Off Roading Safer, Comparing With Other Sheet Or Plastic Flag Mounting Brackets In The Market..
Features
- HEAVY-DUTY: Whip mount is made of high-quality cast aluminum and well finished. Strong, rustproof, impact-resistant, and scratch-resistant whip light mounting bracket, suitable for all weather conditions and situations.
- STRONGER: Unique-designed flag mount using stiffener rib to be more stable. Cooperating with 10mm-thick base, flag bracket would hold your product up to much off roading safer, comparing with other sheet or plastic flag mounting brackets in the market.
- 360 ADJUSTABLE: Light bar bracket has 360 rotation adjustability for you to turn it freely for different purposes. Light bar mount using 12 pins to lock the mount in and keep it more stable than using a single screw.
- APPLICATION: 12.2mm (0.48inch) hole diameter of KEMIMOTO mounting bracket works great for installing led whip lights, flags, led light bars, led pods, cb antennas on the UTV cage.
- FITMENT: CB antenna mount only fits UTV pro-fit cages (channel shaped cages), is compatible with Polaris Ranger General Can-Am Defender Commander (2021+) Maverick Trail Sport.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 5.83 x 3.07 x 2.36 inches | Weight: 0.77 Pounds
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #7
KEMIMOTO 2pc 4ft LED Whip Lights with Whip Mounts for UTV, LED Whips for SXS Offroad, Bluetooth-compatible Waterproof LED Light Whip Compatible with Polaris RZR Can-Am X3 for 1.75-2 inch Roll Bar Cage
Asin: B0CCP3SS1W | Model: BZH0278-02 | PartNumber: BZH0278-02
【Cool & Safe】Kemimoto Utv Led Whips Has 366+ Lighting Modes To Glow In 360°Direction With The Spiral Led Lights To Brighten The Whole Sky, Which Will Help You Stand Out From The Group, Let Them Notice Where You Are, Especially On The Dune Hill, Track, Or Trail..
【Turning Signal & Brake Light】Kemimoto Bluetooth-Compatible Led Whip Lights For Utv Can Be Connected To Taillights And Turn Signals For Brake Light And Turn Signal Functions. Please Refer To The Manual For Specific Wiring Connections..
【Easy To Install】Led Light Whip For Side-By-Side Has A Quick-Release Mounting Base For Easy To Install Or Take Off. American Flags With Adjustable Mounting Clamps To Prevent The Flag From Entangling, Let The Flag Wave In The Wind On Whip Light Flag Pole. The Aluminum Base Is 12Mm Dia (Fits Most Whip Mounts)..
【Waterproof & Durability】Kemimoto Light Whips For Utv Is Ip67 Waterproof Rated. The Light Whips Are Covered By Transparent Heat-Shrinkable Tubes Which Are Made Of Eva And High-Toughness Silicone, Can Be Bendable, And Protect The Waterproof 5050 Smd Chips From Water And Dust. Led Light Whips Have Passed 55,000+ Hours Of Durability Tests..
【App Control】Kemimoto Atv Whip Lights With Mounts Can Be Controlled By Bluetooth-Compatible Or Rf Remote Control. With The Smartphone App, There Are 212 Light Modes Settings, Music Sync Mode, Schedule Timing Function, 100 Light Speed Adjustable Levels, And 100 Light Brightness Adjustable Levels. With Rf Remote Control, Lighted Whips For Utv Have 366 Light Modes, 10 Solid Colors Modes, 6-Speed Adjustable Levels, And 10 Brightness Adjustable Levels..
Features
- Mounting Bracket KEMIMOTO Whip mounting brackets are made for 1.75-2 inch Roll Bar Cage. The hole diameter size of the KEMIMOTO whip mount bracket is about 12.2mm/0.48inch, that is to say, you can attach anything to this whip light mount as long as its base size is 12mm.
- APP Control KEMIMOTO atv whip lights with mounts can be controlled by Bluetooth-compatible or RF remote control. With the smartphone APP, there are 212 light modes settings, music sync mode, schedule timing function, 100 light speed adjustable levels, and 100 light brightness adjustable levels. With RF remote control, lighted whips for UTV have 366 light modes, 10 solid colors modes, 6-speed adjustable levels, and 10 brightness adjustable levels.
- Cool & Safe KEMIMOTO utv led whips has 366+ Lighting Modes to glow in 360 direction with the spiral LED lights to brighten the whole sky, which will help you stand out from the group, let them notice where you are, especially on the dune hill, track, or trail.
- Waterproof & Durability KEMIMOTO light whips for utv is IP67 Waterproof rated. The light whips are covered by transparent heat-shrinkable tubes which are made of EVA and high-toughness silicone, can be bendable, and protect the waterproof 5050 SMD chips from water and dust. Led light whips have passed 55,000+ hours of durability tests.
- Turning signal & Brake light KEMIMOTO Bluetooth-compatible led whip lights for utv can be connected to taillights and turn signals for brake light and turn signal functions. Please refer to the manual for specific wiring connections.
- Easy to Install LED light whip for side-by-side has a quick-release mounting base for easy to install or take off. American Flags with adjustable mounting clamps to prevent the flag from entangling, let the flag wave in the wind on whip light flag pole. The aluminum base is 12mm dia (fits most whip mounts).
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
Dimensions: 1.97 x 47.24 x 1.97 inches
See On Amazon #8
KEMIMOTO 2pc 3ft Whip Lights for Side by Side, LED Whip Lights for UTV ATV Boat Offroad, RF Remote Control Whip LED Antenna Compatible with Polaris RZR Can-Am Maverick X3 Sportsman Outlander
Asin: B08TC6RZ28 | Model: B0804-01001BK | PartNumber: B0804-01001BK
【Waterproof & Durability】Kemimoto Light Whips For Utv Is Ip67 Waterproof Rated. The Light Whips Are Sealed By Less Blinding Smoked Black Tubes That Can Be Bendable, And Protect The Waterproof 5050 Smd Chips From Water And Dust. Led Light Whips Have Passed 55,000+ Hours Of Durability Tests..
【Wide Application】Kemimoto Led Whip Light Is Universal And Fits All Off-Road Vehicles, Truck Atvs Utvs Sxs Boat Go Kart Motorcycle, Compatible With Polaris Rzr 800/ 900/ 1000/ Xp / Pro, Compatible With Can-Am Maverick X3 Commander, Compatible With Talon 1000, Yxz 1000, Teryx, Sportsman, Outlander, Etc..
【Package Includes】Two 3Ft Kemimoto Whip Lights, One Rf Remote Control, Two Usa Flags, Flag Mounting Hardware, And Installation Instruction..
【One-To-One Control】Kemimoto Atv Whip Lights Can Be Controlled By Rf Remote Control. With Rf Remote Control, Lighted Whips For Utv Have 10 Speed Adjustable Levels And 5 Brightness Adjustable Levels..
【Easy To Install】Led Light Whip For Side-By-Side Has A Quick-Release Mounting Base (That Fits Kemimoto Spring Base) For Easy To Install Or Take Off. American Flags With Adjustable Mounting Clamps To Prevent The Flag From Entangling, Let The Flag Wave In The Wind On Whip Light Flag Pole. The Aluminum Base Is 12Mm Dia Which Fits Most Whip Mounts Including Kemimoto Whip Mounts..
Features
- Cool & Safe KEMIMOTO utv led whips have over 300 patterns' automatic mode, 22 dynamic modes and 21 static colors Lighting Modes to brighten the whole sky, which will help you stand out from the group, let them notice where you are, especially on the dune hill, track, or trail. More functions for you to discover, such as timing function, scene modes.
- Easy to Install LED light whip for side-by-side has a quick-release mounting base (that fits KEMIMOTO spring base) for easy to install or take off. American Flags with adjustable mounting clamps to prevent the flag from entangling, let the flag wave in the wind on whip light flag pole. The aluminum base is 12mm dia which fits most whip mounts including KEMIMOTO whip mounts.
- Waterproof & Durability KEMIMOTO light whips for utv is IP67 Waterproof rated. The light whips are sealed by less blinding smoked black tubes that can be bendable, and protect the waterproof 5050 SMD chips from water and dust. Led light whips have passed 55,000+ hours of durability tests.
- One-to-one Control KEMIMOTO atv whip lights can be controlled by RF remote control. With RF remote control, lighted whips for UTV have 10 speed adjustable levels and 5 brightness adjustable levels.
- Wide Application KEMIMOTO led whip light is universal and fits all off-road vehicles, Truck ATVs UTVs SXS Boat Go Kart Motorcycle, compatible with Polaris RZR 800/ 900/ 1000/ xp / pro, compatible with Can-Am Maverick X3 Commander, compatible with Talon 1000, YXZ 1000, Teryx, Sportsman, Outlander, etc.
- Package Includes Two 3ft kemimoto whip lights, one RF remote control, two USA flags, flag mounting hardware, and installation instruction.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
Dimensions: 1.97 x 37.40 x 1.97 Inches
See On Amazon #9
KEMIMOTO COB Whip Lights, 1440pcs LEDs per Whip Far Bright High Density, Bluetooth-connectivity App Control for UTV ATV Buggy Boat Compatible with Can-Am Maverick X3 Polaris RZR, 2pc 3ft
Asin: B0CZRQ48BC
【Cool & Safe】Kemimoto Utv Led Whips Has 366+ Lighting Modes To Glow In 360°Direction With The Spiral Led Lights To Brighten The Whole Sky, Which Will Help You Stand Out From The Group, Let Them Notice Where You Are, Especially On The Dune Hill, Track, Or Trail..
【Wide Application】Kemimoto Led Whip Light Is Universal And Fits All Off-Road Vehicles, Truck Atvs Utvs Sxs Boat Go Kart Motorcycle, Compatible With Polaris Rzr 800/ 900/ 1000/ Xp / Pro, Compatible With Can-Am Maverick X3 Commander, Compatible With Talon 1000, Yxz 1000, Teryx, Sportsman, Outlander, Etc..
【Package Includes】Two 3Ft Kemimoto Upgrade New Cob Leds Whip Lights, One Rf Remote Control, Two Usa Flags, Flag Mounting Hardware, And Installation Instructions..
【Waterproof & Durability】Kemimoto Light Whips For Utv Is Ip67 Waterproof Rated. The Light Whips Are Covered By Transparent Heat-Shrinkable Tubes Which Are Made Of Eva And High-Toughness Silicone, Can Be Bendable, And Protect The Waterproof 5050 Smd Chips From Water And Dust. Led Light Whips Have Passed 55,000+ Hours Of Durability Tests..
【Turning Signal & Brake Light】Kemimoto Bluetooth-Controlled Led Whip Lights For Utv Can Be Connected To Taillights And Turn Signals For Brake Light And Turn Signal Functions. Please Refer To The Manual For Specific Wiring Connections..
【Installation Tips】Led Light Whips For Side-By-Side Has A Quick-Release Mounting Base For Easy To Install Or Take Off. American Flags With Adjustable Mounting Clamps To Prevent The Flag From Entangling, Let The Flag Wave In The Wind On Whip Light Flag Pole. The Aluminum Base Is 12Mm Dia (Fits Most Whip Mounts). Warm Prompt: Before Plugging The Whip Lights To The Connectors, Be Sure To Align The Holes (With Convex On One End And Concave On The Other)..
【App Control】Kemimoto Atv Whip Lights Can Be Controlled By Bluetooth Or Rf Remote Control. With The Smartphone App, There Are 212 Light Mode Settings, Music Sync Mode, Schedule Timing Function, 100 Light Speed Adjustable Levels, And 100 Light Brightness Adjustable Levels. With Rf Remote Control, Lighted Whips For Utv Have 366 Light Modes, 10 Solid Colors Modes, 6-Speed Adjustable Levels, And 10 Brightness Adjustable Levels..
Features
- Enhanced Brightness Number of LEDs for COB whip lights is 2.5 times that of 5050 SMD whip lights, each 3ft COB flagpole light integrates 1440pcs of high-density light beads, which greatly enhances the brightness yet reduces the glare. KEMIMOTO 2024 New whip lights definitely make your side by side stand out from the crowd!
- APP Control KEMIMOTO atv whip lights can be controlled by Bluetooth or RF remote control. With the smartphone APP, there are 212 light mode settings, music sync mode, schedule timing function, 100 light speed adjustable levels, and 100 light brightness adjustable levels. With RF remote control, lighted whips for UTV have 366 light modes, 10 solid colors modes, 6-speed adjustable levels, and 10 brightness adjustable levels.
- Cool & Safe KEMIMOTO utv led whips has 366+ Lighting Modes to glow in 360 direction with the spiral LED lights to brighten the whole sky, which will help you stand out from the group, let them notice where you are, especially on the dune hill, track, or trail.
- Installation Tips LED light whips for side-by-side has a quick-release mounting base for easy to install or take off. American Flags with adjustable mounting clamps to prevent the flag from entangling, let the flag wave in the wind on whip light flag pole. The aluminum base is 12mm dia (fits most whip mounts). Warm Prompt: Before plugging the whip lights to the connectors, be sure to align the holes (with convex on one end and concave on the other).
- Waterproof & Durability KEMIMOTO light whips for utv is IP67 Waterproof rated. The light whips are covered by transparent heat-shrinkable tubes which are made of EVA and high-toughness silicone, can be bendable, and protect the waterproof 5050 SMD chips from water and dust. Led light whips have passed 55,000+ hours of durability tests.
- Turning signal & Brake light KEMIMOTO Bluetooth-controlled led whip lights for utv can be connected to taillights and turn signals for brake light and turn signal functions. Please refer to the manual for specific wiring connections.
- Wide Application KEMIMOTO led whip light is universal and fits all off-road vehicles, Truck ATVs UTVs SXS Boat Go Kart Motorcycle, compatible with Polaris RZR 800/ 900/ 1000/ xp / pro, compatible with Can-Am Maverick X3 Commander, compatible with Talon 1000, YXZ 1000, Teryx, Sportsman, Outlander, etc.
- Package Includes Two 3ft kemimoto upgrade new COB LEDs whip lights, one RF remote control, two USA flags, flag mounting hardware, and installation instructions.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KemimotoUtility
Dimensions: 1.97 x 37.40 x 1.97 Inches
Warranty: 12-month
See On Amazon #10
KEMIMOTO UTV Whip Mount 2-Pack, Compatible with Can-Am Maverick X3 & Maverick X3 MAX, Whip Light Mount Flag Mount Antenna Mount
Asin: B07QS1G3R9 | Model: UTVMB024 | PartNumber: UTVMB024
【Design Upgrade】Kemimoto Whip Lights X3 Mounting Bracket Has A 30° Adjustable Mounting Angle For You To Adjust The Whip Light To Stand Straight Up Or With A Nice Slant. And The Notch Cut Design Is For A Tidy While Wiring The Wire..
【Sturdy】Kemimoto Mount Heavy-Duty Material, Made From 3/16" Steel Which Is Nice And Will Be Very Sturdy For Your Led Whips..
【Easy Installation】Kemimoto Whip Flag Brackets Mount On The Exit Holes On The Right & Left Side Rear Upper Pillars With Stock Bolts. No Drilling..
【Work With Various Products】The X3 Mount Brackets Are Perfect For Radios Antenna Mounts, Go Pro, Lighted Whips, Fiberglass Whips, Or Anything Else..
Features
- Fitment These whip light mounting brackets are compatible with Can-Am Maverick X3 & Can-Am Maverick X3 MAX 2017-2023 all models, such as Can-Am Maverick X3 RS Turbor, X3 MAX Ds Turbo RR.
- Work with Various Products The X3 mount brackets are perfect for Radios Antenna mounts, Go Pro, Lighted Whips, Fiberglass whips, or anything else.
- Design Upgrade KEMIMOTO whip lights X3 Mounting Bracket has a 30 adjustable mounting angle for you to adjust the whip light to stand straight up or with a nice slant. And the notch cut design is for a tidy while wiring the wire.
- Easy installation KEMIMOTO whip flag brackets mount on the exit holes on the right & left side rear upper pillars with stock bolts. No drilling.
- Sturdy KEMIMOTO mount Heavy-duty material, made from 3/16 steel which is nice and will be very sturdy for your LED whips.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 0.80 x 3.50 x 5.50 Inches | Weight: 0.29 Pounds
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #11
kemimoto Upgraded UTV Whip Mount 1PCS, Double-Clamps 1.5"-2" Roll Cage Heavy-Duty Aluminum Whip Light Mounting Bracket Flag Mount, Compatible with Can Am Maverick X3 Polaris Pro RZR Kawasaki Talon
Asin: B08W29HRMH
【Fitment】Kemimoto Whip Light Mount Can Be Mounted On A 1.5" To 2" Roll Bar. That Is To Say, It Works With All Utv, Such As Compatible With Rzr 900/ 1000/ Xp/ Pro, Compatible With Maverick/ X3/ Commander, Compatible With Talon, Compatible With Mule Yxz, Kubota Rtv And The List Goes On..
【Material】High-Quality Aluminum With Cnc Cut For Perfect Outlook. Kemimoto Utv Whip Light Mount Is Designed For Long-Term Use, Great For All Weather Conditions..
【Installation】Easy Installation With All Hardware Included, Directly Bolt-On Design, No Drilling Or Trimming. Kemimoto Whip Lights Mounting Angle Can Be Adjusted, You Can Loosen The Bolt And Twist It To The Perfect Angle You Want..
【Function】Mounting A Flag Or Whip Light To Your Machine Will Give Other Riders Notice That You Are On The Dune Hill, Track, Or Trail. But Flag Or Whip Light Come In Different Styles, You May Not Be Able To Find The Perfect Spot To Install It, So That Is What The Kemimoto Mount For..
Features
- Package One pcs Heavy-duty Aluminum kemimoto utv whip light Mount with tools and installation instruction available.
- Function Mounting a flag or whip light to your machine will give other riders notice that you are on the dune hill, track, or trail. But flag or whip light come in different styles, you may not be able to find the perfect spot to install it, so that is what the kemimoto mount for.
- Fitment Kemimoto whip light mount can be mounted on a 1.5 to 2 roll bar. That is to say, it works with all UTV, such as compatible with RZR 900/ 1000/ XP/ Pro, compatible with Maverick/ x3/ Commander, compatible with Talon, compatible with Mule YXZ, KUBOTA RTV and the list goes on.
- Installation Easy installation with all hardware included, directly bolt-on design, no drilling or trimming. kemimoto whip lights mounting angle can be adjusted, you can loosen the bolt and twist it to the perfect angle you want.
- Material High-quality Aluminum with CNC cut for perfect outlook. Kemimoto UTV whip light mount is designed for long-term use, great for all weather conditions.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: Kemimoto Utility
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #12
KEMIMOTO UTV Whip Mount, Quick-Release CNC-Machined 360 Adjustable, Fit 1.75"-2" Roll Bar, 1-Pack
Asin: B095BP6K7X | Model: B0111-09101BK | PartNumber: B0111-09101BK
Adaptability: The Hole Size Of Utv Flag Mount Is 12Mm And Can Be Used To Hold Your Off-Road Whip Light, Flag, Led Light Bars, Pole, Chasing Light, Cb Radio Antennas, Etc. Kemimoto Utv Whip Mount Can Adapt Different Types Of Light And Antennas With 12Mm And Held Securely.No More Worry About Falling Down Or Losing Your Whip Lights While Riding..
Installation: Direct Bolt-On Design Is Easy For Everyone To Install. No Trimming Or Drilling Is Required. Removing The Quick-Release Pin,The Mounting Angle Of The Flag Could Be Easily Adjusted And Change It To Any Position Or Angle. The Installation Video Has Been Uploaded To The Page. Please Refer To The Video When You Have An Installation Issue..
Material: High Quality Aluminum With Cnc Cut Provides Perfect Appearance Compatible With Sxs. Kemimoto Whip Lights Mount For Utv Works Well With All Road Conditions And Weather Conditions. The Package Comes With 1Pcs Aluminum Utv Flag Pole Mount With An Offset Screwdriver..
Fitment: Kemimoto Whip Light Mount Universally Fits Most Models Of Utvs With 1.75-Inch To 2-Inch Roll Bar, Compatible With Can-Am Maverick X3/ Maverick/ Commander, Compatible With Polaris Rzr 900/1000/ Xp/ Pro, Compatible With Kawasaki Mule/ Yxz And Talon. The Vehicle List Is Shown In Detail In The Description Below..
Features
- Function: A flag or whip light can be mounted by kemimoto mount on your UTV roll bar that will give attention to other riders to know that you are on the track, trail, or dune. In addition, the direct bolt-on and quick-release design allows you to take your whip light or flag off easily by removing the R pin when you come across some obstacles while you are on riding such as branches or some places where limited height.
- Fitment: kemimoto whip light mount universally fits most models of UTVs with 1.75-inch to 2-inch roll bar, Compatible with Can-Am Maverick X3/ Maverick/ Commander, Compatible with Polaris RZR 900/1000/ XP/ Pro, Compatible with Kawasaki Mule/ YXZ and Talon. The vehicle list is shown in detail in the description below.
- Adaptability: The hole size of UTV flag mount is 12mm and can be used to hold your off-road whip light, flag, LED light bars, pole, chasing light, CB radio antennas, etc. kemimoto utv whip mount can adapt different types of light and antennas with 12mm and held securely.No more worry about falling down or losing your whip lights while riding.
- Material: High quality Aluminum with CNC cut provides perfect appearance compatible with SXS. kemimoto whip lights mount for utv works well with all road conditions and weather conditions. The package comes with 1PCS Aluminum utv flag pole mount with an offset screwdriver.
- Installation: Direct bolt-on design is easy for everyone to install. No trimming or drilling is required. Removing the quick-release pin,the mounting angle of the flag could be easily adjusted and change it to any position or angle. The installation video has been uploaded to the page. Please refer to the video when you have an installation issue.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KemimotoUtility
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #13
KEMIMOTO Whip Light Mount 2PCS, Heavy Duty CNC Machined Aluminum 360 Adjustable UTV Whip Mount, Fit 1.75"-2" Roll Bar, Fit Whip Light Flag Pod Light Bar Antenna
Asin: B089YD3PCS | Model: B0111-02504BK | PartNumber: B0111-02504BK
360° Stable Adjustable: 12 Pins On The Base Allow Angle Adjustment From 30° To 360°. Sturdy Material, Precision Mechanism, And Screw Fixing, Provide A Secure Mounting Bracket For Lights And Flags..
Fitment: This Utv Whip Mount Fits 1.75"-2" Roll Bar, Is Compatible With Can-Am Maverick X3 & X3 Max, Polaris Rzr, Talon, Kawasaki Mule & Teryx... Does Not Fit Pro-Fit Cage And Atv..
Application: 12.2Mm (0.48Inch) Hole Diameter Of The Mount Works Well With Whip Lights, Flags, Light Bars, Light Pods, Antennas….
Easy To Install: Installation Requires Only Screws, No Drilling Or Trimming. All Necessary Mounting Tools And Hardware Are Included..
Features
- HEAVY-DUTY CNC-MACHINED ALUMINUM: The whip mount is made with CNC aluminum machining. Precision machining, excellent mechanical strength, beautiful glossy appearance, make this UTV whip mount the premium and solid product.
- EASY TO INSTALL: Installation requires only screws, no drilling or trimming. All necessary mounting tools and hardware are included.
- 360 STABLE ADJUSTABLE: 12 pins on the base allow angle adjustment from 30 to 360 . Sturdy material, precision mechanism, and screw fixing, provide a secure mounting bracket for lights and flags.
- APPLICATION: 12.2mm (0.48inch) hole diameter of the mount works well with whip lights, flags, light bars, light pods, antennas
- FITMENT: This UTV whip mount fits 1.75-2 roll bar, is compatible with Can-Am Maverick X3 & X3 MAX, Polaris RZR, Talon, Kawasaki Mule & Teryx... Does not fit Pro-Fit cage and ATV.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 3.10 x 4.50 x 1.40 Inches | Weight: 0.00 pounds
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #14
KEMIMOTO UTV Whip Mount, Quick-Release CNC-Machined 360 Adjustable, Fit 1.75"-2" Roll Bar, 2-Pack
Asin: B09FLV5MP6 | Model: B0111-09101BK(2) | PartNumber: B0111-09101BK(2)
12.2Mm (0.48") Mounting Hole: Kemimoto Utv Whip Mount Can Mount Most Whip Lights, Whip Light Springs, Flags, Light Pods, Light Bars, And Antennas On Your Utv..
Super-Easy Installation: Directly Bolt On Design, No Drilling, No Trimming..
Fitment: The Bracket Fit 1.75"-2" Roll Bar (Not Fit Pro-Fit Cage). Compatible With Can-Am Maverick X3 & X3 Max, Polaris Rzr....
Cnc-Machined Aluminum: Heavy Duty, High Precision Machining, High Strength, Corrosion Resistance, High Level Of Gloss Finish, Excellent Aesthetics..
Features
- QUICK-RELEASE FUNCTION: Take 1s to pull out the pin, then you can rotate the bracket base to adjust the angle, or easily remove the product mounted on the base. Especially suitable for whip lights that need to be dismantled when entering and exiting the garage.
- CNC-MACHINED ALUMINUM: heavy duty, high precision machining, high strength, corrosion resistance, high level of gloss finish, excellent aesthetics.
- 12.2mm (0.48) MOUNTING HOLE: KEMIMOTO UTV Whip Mount can mount most whip lights, whip light springs, flags, light pods, light bars, and antennas on your UTV.
- FITMENT: The bracket fit 1.75-2 roll bar (not fit Pro-Fit cage). Compatible with Can-Am Maverick X3 & X3 MAX, Polaris RZR...
- SUPER-EASY INSTALLATION: directly bolt on design, no drilling, no trimming.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KemimotoUtility
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #15
kemimoto Upgraded UTV Whip Mount 2PCS, Double-Clamps 1.5"-2" Roll Cage Heavy-Duty Aluminum Whip Light Mounting Bracket Flag Mount, Compatible with Can Am Maverick X3 Polaris Pro RZR Kawasaki Talon
Asin: B0BR5JD6JC | Model: B0111-05601BK(2) | PartNumber: B0111-05601BK(2)
【Fitment】Kemimoto Whip Light Mount Can Be Mounted On A 1.5" To 2" Roll Bar. That Is To Say, It Works With All Utv, Such As Compatible With Rzr 900/ 1000/ Xp/ Pro, Compatible With Maverick/ X3/ Commander, Compatible With Talon, Compatible With Mule Yxz, Kubota Rtv And The List Goes On..
【Material】High-Quality Aluminum With Cnc Cut For Perfect Outlook. Kemimoto Utv Whip Light Mount Is Designed For Long-Term Use, Great For All Weather Conditions..
【Installation】Easy Installation With All Hardware Included, Directly Bolt-On Design, No Drilling Or Trimming. Kemimoto Whip Lights Mounting Angle Can Be Adjusted, You Can Loosen The Bolt And Twist It To The Perfect Angle You Want.H Rzr 900/ 1000/ Xp/ Pro, Compatible With Maverick/ X3/ Commander, Compatible With Talon, Compatible With Mule Yxz, Kubota Rtv And The List Goes On..
【Function】Mounting A Flag Or Whip Light To Your Machine Will Give Other Riders Notice That You Are On The Dune Hill, Track, Or Trail. But Flag Or Whip Light Come In Different Styles, You May Not Be Able To Find The Perfect Spot To Install It, So That Is What The Kemimoto Mount For..
Features
- Package One pcs Heavy-duty Aluminum UTV Whip Light Mount with tools and installation instruction available.
- Function Mounting a flag or whip light to your machine will give other riders notice that you are on the dune hill, track, or trail. But flag or whip light come in different styles, you may not be able to find the perfect spot to install it, so that is what the kemimoto mount for.
- Fitment Kemimoto whip light mount can be mounted on a 1.5 to 2 roll bar. That is to say, it works with all UTV, such as compatible with RZR 900/ 1000/ XP/ Pro, compatible with Maverick/ x3/ Commander, compatible with Talon, compatible with Mule YXZ, KUBOTA RTV and the list goes on.
- Installation Easy installation with all hardware included, directly bolt-on design, no drilling or trimming. kemimoto whip lights mounting angle can be adjusted, you can loosen the bolt and twist it to the perfect angle you want.h RZR 900/ 1000/ XP/ Pro, compatible with Maverick/ x3/ Commander, compatible with Talon, compatible with Mule YXZ, KUBOTA RTV and the list goes on.
- Material High-quality Aluminum with CNC cut for perfect outlook. Kemimoto UTV whip light mount is designed for long-term use, great for all weather conditions.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KemimotoUtility
Dimensions: 5.51 x 5.91 x 5.12 inches
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #16
KEMIMOTO 2pc 3ft Whip Lights with Spring Base for Side by Side, LED Whip Lights for UTV ATV Boat Offroad, RF Remote Control Whip LED Antenna Compatible with Polaris RZR Can-Am Maverick X3 Sportsman
Asin: B0C9SKTMH5 | Model: BZH0257-02 | PartNumber: BZH0257-02
【Easy To Install】Led Light Whip For Side-By-Side Has A Quick-Release Spring Base For Easy To Install Or Take Off. American Flags With Adjustable Mounting Clamps To Prevent The Flag From Entangling, Let The Flag Wave In The Wind On Whip Light Flag Pole. The Aluminum Spring Base Is 12Mm Dia Which Fits Most Whip Mounts Including Kemimoto Whip Mounts..
【Package Includes】Two 3Ft Kemimoto Whip Lights Equipped With Two Spring Bases, One Rf Remote Control, Two Usa Flags, Flag Mounting Hardware, And Installation Instruction..
【One-To-One Control】Kemimoto Atv Whip Lights Can Be Controlled By Rf Remote Control. With Rf Remote Control, Lighted Whips For Utv Have 10 Speed Adjustable Levels And 5 Brightness Adjustable Levels..
【Wide Application】Kemimoto Led Whip Light Is Universal And Fits All Off-Road Vehicles, Truck Atvs Utvs Sxs Boat Go Kart Motorcycle, Compatible With Polaris Rzr 800/ 900/ 1000/ Xp / Pro, Compatible With Can-Am Maverick X3 Commander, Compatible With Talon 1000, Yxz 1000, Teryx, Sportsman, Outlander, Etc..
【Waterproof & Durability】Kemimoto Light Whips For Utv Is Ip67 Waterproof Rated. The Light Whips Are Sealed By Less Blinding Smoked Black Tubes That Can Be Bendable, And Protect The Waterproof 5050 Smd Chips From Water And Dust. Led Light Whips Have Passed 55,000+ Hours Of Durability Tests..
【Cool & Safe】Kemimoto Utv Led Whips With Spring Base Have Over 300 Patterns' Automatic Mode, 22 Dynamic Modes And 21 Static Colors Lighting Modes To Brighten The Whole Sky, Which Will Help You Stand Out From The Group, Let Them Notice Where You Are, Especially On The Dune Hill, Track, Or Trail. More Functions For You To Discover, Such As Timing Function, Scene Modes..
Features
- Spring Base Adds extra flex to your utv whip lights. It will help save your whip in the wind from being damaged from its bending let the spring bend, not the whip itself. they seem very stiff, but they do bend very easily with the whips in place. Especially in high winds or driving in the jungle.
- Cool & Safe KEMIMOTO utv led whips with spring base have over 300 patterns' automatic mode, 22 dynamic modes and 21 static colors Lighting Modes to brighten the whole sky, which will help you stand out from the group, let them notice where you are, especially on the dune hill, track, or trail. More functions for you to discover, such as timing function, scene modes.
- Easy to Install LED light whip for side-by-side has a quick-release spring base for easy to install or take off. American Flags with adjustable mounting clamps to prevent the flag from entangling, let the flag wave in the wind on whip light flag pole. The aluminum spring base is 12mm dia which fits most whip mounts including KEMIMOTO whip mounts.
- Waterproof & Durability KEMIMOTO light whips for utv is IP67 Waterproof rated. The light whips are sealed by less blinding smoked black tubes that can be bendable, and protect the waterproof 5050 SMD chips from water and dust. Led light whips have passed 55,000+ hours of durability tests.
- One-to-one Control KEMIMOTO atv whip lights can be controlled by RF remote control. With RF remote control, lighted whips for UTV have 10 speed adjustable levels and 5 brightness adjustable levels.
- Wide Application KEMIMOTO led whip light is universal and fits all off-road vehicles, Truck ATVs UTVs SXS Boat Go Kart Motorcycle, compatible with Polaris RZR 800/ 900/ 1000/ xp / pro, compatible with Can-Am Maverick X3 Commander, compatible with Talon 1000, YXZ 1000, Teryx, Sportsman, Outlander, etc.
- Package Includes Two 3ft kemimoto whip lights equipped with two spring bases, one RF remote control, two USA flags, flag mounting hardware, and installation instruction.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
Dimensions: 1.97 x 37.40 x 1.97 inches
See On Amazon #17
KEMIMOTO 2PCS UTV Whip Light Mounts Flag Pole Mounts Light Bar Brackets CB Antenna Mounts, Compatible with Polaris Ranger General Can-Am Defender Commander Maverick Sport Trail Pro-Fit Cage, Red
Asin: B0CBPNJGBY | Model: B0111-10602RD(2) | PartNumber: B0111-10602RD(2)
360° Adjustable: Light Bar Bracket Has 360° Rotation Adjustability For You To Turn It Freely For Different Purposes. Light Bar Mount Using 12 Pins To Lock The Mount In And Keep It More Stable Than Using A Single Screw..
Fitment: Cb Antenna Mount Only Fits Utv Pro-Fit Cages (Channel Shaped Cages), Is Compatible With Polaris Ranger General Can-Am Defender Commander (2021+) Maverick Trail Sport..
Application: 12.2Mm (0.48Inch) Hole Diameter Of Kemimoto Mounting Bracket Works Great For Installing Led Whip Lights, Flags, Led Light Bars, Led Pods, Cb Antennas On The Utv Cage..
Stronger: Unique-Designed Flag Mount Using Stiffener Rib To Be More Stable. Cooperating With 10Mm-Thick Base, Flag Bracket Would Hold Your Product Up To Much Off Roading Safer, Comparing With Other Sheet Or Plastic Flag Mounting Brackets In The Market..
Features
- HEAVY-DUTY: Whip mount is made of high-quality cast aluminum and well finished. Strong, rustproof, impact-resistant, and scratch-resistant whip light mounting bracket, suitable for all weather conditions and situations.
- STRONGER: Unique-designed flag mount using stiffener rib to be more stable. Cooperating with 10mm-thick base, flag bracket would hold your product up to much off roading safer, comparing with other sheet or plastic flag mounting brackets in the market.
- 360 ADJUSTABLE: Light bar bracket has 360 rotation adjustability for you to turn it freely for different purposes. Light bar mount using 12 pins to lock the mount in and keep it more stable than using a single screw.
- APPLICATION: 12.2mm (0.48inch) hole diameter of KEMIMOTO mounting bracket works great for installing led whip lights, flags, led light bars, led pods, cb antennas on the UTV cage.
- FITMENT: CB antenna mount only fits UTV pro-fit cages (channel shaped cages), is compatible with Polaris Ranger General Can-Am Defender Commander (2021+) Maverick Trail Sport.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 5.83 x 3.07 x 2.36 Inches | Weight: 0.77 Pounds
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #18
KEMIMOTO UTV Flag Mount Whip Light Mount 1PCS, Heavy Duty Adjustable Bracket for 1.75-2 inch Roll Bar Cage Compatible with Polaris RZR 900 1000 XP Pro Turbo Can Am Maverick X3 Commander, Grey
Asin: B0B467MXBT | Model: B0111-02507GY | PartNumber: B0111-02507GY
【Easy To Install】Easy To Install With The Mounting Tool, Directly Bolt-On Design, No Drilling Or Trimming. Kemimoto Whip Light Mounting Angle Can Be Adjusted 360°, You Can Only Loosen One Bolt And Change It To The Perfect Angle You Want..
【Fitment】Utv Flag Mount Compatible With All Utv, Compatible With Polaris Rzr 900/ 1000/ Xp/ Pro, Compatible With Maverick/ X3/ Commander, Compatible With Talon/Mule Yxz, And The List Goes On. Kemimoto Utv Whip Mount Can Be Mounted On A 1.75"- 2" Roll Bar..
【Adaptability】The Hole Diameter Size Of The Utv Whip Mount Is About 12Mm/0.48Inch, That Is To Say, You Can Attach Anything To Kemimoto Whip Lights Mount As Long As Its Base Size Is 12Mm..
【More Sturdy Construction】 Kemimoto Mount Different Inner Shape Makes The Construction More Stable. Prevent Hole Wear Problems Caused By Long-Term Use Of Screws..
Features
- Function Mounting a flag or whip light to your machine will give other riders notice that you are on on the track, trail, or dune.
- More Sturdy Construction kemimoto mount different inner shape makes the construction more stable. Prevent hole wear problems caused by long-term use of screws.
- Easy to Install Easy to install with the mounting tool, directly bolt-on design, no drilling or trimming. kemimoto whip light mounting angle can be adjusted 360 , you can only loosen one bolt and change it to the perfect angle you want.
- Adaptability The hole diameter size of the utv whip mount is about 12mm/0.48inch, that is to say, you can attach anything to kemimoto whip lights mount as long as its base size is 12mm.
- Fitment UTV Flag Mount Compatible with all UTV, Compatible with Polaris RZR 900/ 1000/ XP/ Pro, Compatible with Maverick/ x3/ Commander, Compatible with Talon/Mule YXZ, and the list goes on. kemimoto utv whip mount can be mounted on a 1.75- 2 roll bar.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 1.77 x 5.51 x 3.54 Inches | Weight: 0.66 Pounds
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #19
KEMIMOTO ATV Whip Mount, Flag Mount Bracket Heavy Duty Upgraded CNC Aluminum LED Light Bar Adjustable for 7/8"-9/8" Handlebar Bars Compatible with ATV E-Bike Gocart 360 Rotation (1 PCS)
Asin: B0D12C9RXW | Model: B0111-14501BK | PartNumber: B0111-14501BK
Features
- KEMIMOTO ATV Whip Mount, Flag Mount Bracket Heavy Duty Upgraded CNC Aluminum LED Light Bar Adjustable for 7/8"-9/8" Handlebar Bars Compatible with ATV E-Bike Gocart 360 Rotation (1 PCS)
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Warranty: 1 year warranty
See On Amazon
Looking For Something Else?
Search