MEETOOT 2pcs USB Lipo Battery Charging Charger Cable with 2.0 Round Plug for Attop XT-1 RC Quadcopter WiFi FPV Drone, Black USB DC Charger Power Cable
Asin: B0BZVJJ6TY | Model: 28663-LBCCCD-2 | PartNumber: 28663-LBCCCD-2
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Input Plug: Usb Male; Output Plug: Outer Diameter 2.0Mm Round Plug..
The Charging Cable Has A Built-In Intelligent Charging Management Ic, Which Can Protect The Lithium Battery From Charging And Will Not Overcharge, And Better Extend The Life Of The Lithium Battery..
Rechargeable Battery: 3.7V Lithium Battery 50-600Mah..
Input Voltage: Dc 5V 0.5-2A, Output Voltage: Dc 4.2V 300Ma..
Features
- Package contains: 2pcs USB lithium battery charging cable.
- Input voltage: DC 5V 0.5-2A, output voltage: DC 4.2V 300mA.
- Input plug: USB male; Output plug: outer diameter 2.0mm round plug.
- Rechargeable battery: 3.7V lithium battery 50-600mAH.
- The charging cable has a built-in intelligent charging management IC, which can protect the lithium battery from charging and will not overcharge, and better extend the life of the lithium battery.
- See more on Amazon...
Brand: MEETOOT | Manufacturer: MEETOOT
See On Amazon Similar To MEETOOT 2pcs USB Lipo Battery
#1
Treedix 2pcs Type C USB LiPo Battery Charger Board with Battery Protection JST Socket with LED Indicator Charging Rate Adjustable Automatic Power-Down
Asin: B09FJJBLQ1 | Ean: 0764784798361 | UPC: 764784798361
The Default Charging Rate Of The Charger Is 500Ma. If The Battery Is Charged With A Current That Exceeds The Battery Charging Current Specification, It Will Cause The Life Of The Lithium Battery To Decrease. So You Can Add Some Resistors On R1 (This Would Require Cutting A Trace) Or Replacing The Surface Mount Resistor With A Higher Resistance Value..
Plug The Type C Cable Into The Usb Port Of The Charging Board, And Insert The Lithium Battery Into The Jst Port On The Other End.
It Is For Charging 3.7/4.2V Single Lithium Ion/Lithium Polymer Batteries.
Automatic Power-Down:There Is An Led Indicator On The Charging Board. When Charging, The Led Indicator Will Be Lit, And When The Battery Is Fully Charged, The Led Indicator Will Go Out..
Features
- This is a lithium battery charger equipped with a battery charge controller IC MCP73831T-2ACI/OT, the input charging connector uses Type C
- Automatic Power-Down:There is an LED indicator on the charging board. When charging, the led indicator will be lit, and when the battery is fully charged, the led indicator will go out.
- The default charging rate of the charger is 500mA. If the battery is charged with a current that exceeds the battery charging current specification, it will cause the life of the lithium battery to decrease. So you can add some resistors on R1 (this would require cutting a trace) or replacing the surface mount resistor with a higher resistance value.
- It is for charging 3.7/4.2v single Lithium Ion/Lithium Polymer batteries
- Plug the Type C cable into the USB port of the charging board, and insert the lithium battery into the JST port on the other end
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
See On Amazon #2
Treedix 2pcs Mini USB LiPo Battery Charger Board with Battery Protection JST Socket with LED Indicator Charging Rate Adjustable Automatic Power-Down
Asin: B09FJLVLN1 | Model: TRX5-0231 | PartNumber: TRX5-0231 | Ean: 0764784798378 | UPC: 764784798378
The Default Charging Rate Of The Charger Is 500Ma. If The Battery Is Charged With A Current That Exceeds The Battery Charging Current Specification, It Will Cause The Life Of The Lithium Battery To Decrease. So You Can Add Some Resistors On R1 (This Would Require Cutting A Trace) Or Replacing The Surface Mount Resistor With A Higher Resistance Value..
Plug The Mini Usb Cable Into The Usb Port Of The Charging Board, And Insert The Lithium Battery Into The Jst Port On The Other End.
It Is For Charging 3.7/4.2V Single Lithium Ion/Lithium Polymer Batteries..
Automatic Power-Down:There Is An Led Indicator On The Charging Board. When Charging, The Led Indicator Will Be Lit, And When The Battery Is Fully Charged, The Led Indicator Will Go Out..
Features
- This is a lithium battery charger equipped with a battery charge controller IC MCP73831T-2ACI/OT, the input charging connector uses Mini USB
- Automatic Power-Down:There is an LED indicator on the charging board. When charging, the led indicator will be lit, and when the battery is fully charged, the led indicator will go out.
- The default charging rate of the charger is 500mA. If the battery is charged with a current that exceeds the battery charging current specification, it will cause the life of the lithium battery to decrease. So you can add some resistors on R1 (this would require cutting a trace) or replacing the surface mount resistor with a higher resistance value.
- It is for charging 3.7/4.2v single Lithium Ion/Lithium Polymer batteries.
- Plug the Mini USB cable into the USB port of the charging board, and insert the lithium battery into the JST port on the other end
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
See On Amazon #3
3Packs 7.4V 2S LiPo Battery USB Charger Cable 1A Fast Charging with XH-3P Connector for RC Car Truck Rock Crawler FPV Drone Airplane Boat Racing Quadcopter Helicopter Airsoft SCX24
Asin: B0B5GVVTJT
The Lipo Battery Usb Charger Cable Has An Indicator Light, The Green Light Is Flashing And The Red Light Is Solid When It Is Charging; The Green Light And The Red Light Are Solid When It Is Fully Charged; If The Red Light Is Flashing Quickly, It Means An Alarm..
Package：3Pack 7.4V Usb Charger.
This 2S Battery Charger Is Widely Applicable To Rc Cars, Trucks, Drones, Airplanes, Quadcopters, Helicopters..
This 2S Lipo Usb Charger Cable Is Equipped With Overvoltage, Overload, Shortcircuit Protection. This Lipo Battery Usb Charger Only Suit For 7.4V Lipo Battery Xh-3Pin Plug, Please Make Sure The Voltage And Plug Match!.
Features
- The lipo battery charger is specially used for charging 7.4V lithium polymer battery, input: DC 5V, output current: 1000mA, We recommend that you use it at a voltage of 7.4V below 2000mAh. it is not recommended to use batteries below 500mah.
- This 2S LiPo USB charger cable is equipped with overvoltage, overload, shortcircuit protection. This LiPo Battery USB Charger only suit for 7.4V LiPo battery XH-3pin plug, please make sure the voltage and plug match!
- The lipo battery USB charger cable has an indicator light, the green light is flashing and the red light is solid when it is charging; the green light and the red light are solid when it is fully charged; if the red light is flashing quickly, it means an alarm.
- This 2s battery charger is widely applicable to RC cars, trucks, drones, airplanes, quadcopters, helicopters.
- Package 3Pack 7.4v USB Charger
- See more on Amazon...
Brand: Nuofany | Manufacturer: Nuofany
Dimensions: 0.04 x 0.08 x 0.04 inches
Warranty: 6 months
See On Amazon #4
Maxmoral 2pcs TP4056 Lipo Battery Charging Board Micro USB Port Lithium Battery Charger Module 1A
Asin: B07S7PX3KW | Model: TP4056-1AMicro-2 | PartNumber: TP4056-1AMicro-2 | Ean: 0713871354782 | UPC: 713871354782
Input Interface:Micro Usb,Input Voltage:Dc 5V,Maximum Charging Current:1A;Full Charge Voltage:4.2V..
Onboard Micro Usb And Soldering Connector 5V Input Port And Charging Status Indicator(Red Indicator Is Charging, Green Indicator Is Fully Charged)..
Micro Usb Lithium Battery Charging Board With Overcharge,Over Discharge And Overcurrent Protection..
Adjustable Current,The Output Value Can Be Simply Changed To 100Ma-1000Ma By Changing The Fixed Resistance In The Circuit Board,Very Convenient To Use..
Features
- Adopting very mature charging chip TP4056,simple peripheral circuit,good protection performance,high charging precision.
- Adjustable current,the output value can be simply changed to 100mA-1000mA by changing the fixed resistance in the circuit board,very convenient to use.
- Input Interface:MICRO USB,Input voltage:DC 5V,Maximum charging current:1A;Full Charge Voltage:4.2V.
- Micro usb lithium battery charging board with overcharge,over discharge and overcurrent protection.
- Onboard micro USB and soldering connector 5V input port and charging status indicator(red indicator is charging, green indicator is fully charged).
- See more on Amazon...
Brand: Maxmoral | Manufacturer: Maxmoral
Dimensions: 0.98 x 0.75 x 0.24 inches | Weight: 0.01 pounds
See On Amazon
Looking For Something Else?
Search